Metal matrix composites (MMCs) constitute an important class of weight-efficient structural material which empowering every field of engineering applications. Aluminium based metal matrix composites contains potential for high specific strength and advanced structural applications, as well as good elevated temperature resistance along with light weight application. However, need for improved tribological performance has led to the fabrication of newer variants of the composite. In the present work, aluminium based metal matrix composite (MMCs) developed through stir casting route by reinforcing different weight percentage of SiC micro (5% and 10%) and nano (1% and 2%) particles. In this research, 5083 aluminium alloy is used as matrix phase due its broad range of industrial applications. Wear behaviour of the developed aluminium matrix composite (AMC) was investigated under different conditions of applied load, operation time and speed. The analysis carried out at room temperature for three different loads (10N, 20N, and 30N) with varying four different operation times (30 mins, 60 mins, 90 mins, and 120 mins). The speed was kept constant at 1450 rpm during all experiments. The results of all considered composites are investigated and the composite with 2% SiC nano reinforcement is identified as a superior among all other composition for tribological applications point of view. Also the developed aluminium matrix composites have potential applications in many industries such as pressure vessels, pipe fittings, boat hulls, gears and pistons.
Skip Nav Destination
ASME 2017 Pressure Vessels and Piping Conference
July 16–20, 2017
Waikoloa, Hawaii, USA
Conference Sponsors:
- Pressure Vessels and Piping Division
ISBN:
978-0-7918-5799-1
PROCEEDINGS PAPER
Fabrication and Wear Analysis of Aluminium Matrix Composite Reinforced by SiC Micro and Nano Particles
Amir Hussain Idrisi,
Amir Hussain Idrisi
United Arab Emirates University, Al-Ain, UAE
Search for other works by this author on:
Abdel-Hamid Ismail Mourad
Abdel-Hamid Ismail Mourad
United Arab Emirates University, Al-Ain, UAE
Search for other works by this author on:
Amir Hussain Idrisi
United Arab Emirates University, Al-Ain, UAE
Abdel-Hamid Ismail Mourad
United Arab Emirates University, Al-Ain, UAE
Paper No:
PVP2017-65459, V06AT06A033; 8 pages
Published Online:
October 26, 2017
Citation
Idrisi, AH, & Mourad, AI. "Fabrication and Wear Analysis of Aluminium Matrix Composite Reinforced by SiC Micro and Nano Particles." Proceedings of the ASME 2017 Pressure Vessels and Piping Conference. Volume 6A: Materials and Fabrication. Waikoloa, Hawaii, USA. July 16–20, 2017. V06AT06A033. ASME. https://doi.org/10.1115/PVP2017-65459
Download citation file:
28
Views
Related Proceedings Papers
Related Articles
Effect of Synthesis Procedure on Particle Dispersion and Hardness of Al–SiC Functionally Graded Metal Matrix Composite
J. Eng. Mater. Technol (April,2022)
Friction and Wear of Aluminum Alloys Containing Hard Phases
J. Tribol (April,1995)
Wear Resistance Improvement of Austenitic 316 L Steel by Microwave-Processed Composite Clads
J. Tribol (April,2019)
Related Chapters
Introduction and Definitions
Handbook on Stiffness & Damping in Mechanical Design
Understanding the Problem
Design and Application of the Worm Gear
Part 2, Section II—Materials and Specifications
Companion Guide to the ASME Boiler & Pressure Vessel Code, Volume 1, Second Edition