The present paper presents the experimental results for pressure drop in inclined tube bundles located in a rectangular duct. Measurements are made for pressure drop in triangular and rotated triangular tube arrays having P/d ratio of 1.6 and inclination angles of 30, 45, 60 and 90 degrees. The Reynolds number based on the free stream velocity and tube diameter ranges from 8×102 to 6.3×104. The experimental results show that the magnitude of dimensionless pressure drop decreases significantly when the inclined angle is less than 45 degree. The measured data are compared with two existing correlations available in the literatures. The ESDU correlation agrees well with the present data for the triangular arrays. But some discrepancies are observed for the rotated triangular arrays when the inclined angles are 30 and 45 degrees. The Idel’chik correlation generally agrees well with the measured data for the rotated triangular arrays except for the inclined angle of 30 degree. The Idel’chik correlation needs modification for the triangular arrays. The modified Idel’chik correlation agrees well with the measured data within 10%. It is found that the present measured data can be applied to the evaluation and modification of previous correlations.
Skip Nav Destination
ASME 2002 Pressure Vessels and Piping Conference
August 5–9, 2002
Vancouver, BC, Canada
Conference Sponsors:
- Pressure Vessels and Piping Division
ISBN:
0-7918-1946-9
PROCEEDINGS PAPER
Measurement of Pressure Drop in Inclined Triangular and Rotated Triangular Tube Bundles Available to Purchase
Seok-Ki Choi,
Seok-Ki Choi
Korea Atomic Energy Research Institute, Taejon, Korea
Search for other works by this author on:
Il Kon Choi,
Il Kon Choi
Korea Atomic Energy Research Institute, Taejon, Korea
Search for other works by this author on:
Kil Yong Lee,
Kil Yong Lee
Korea Atomic Energy Research Institute, Taejon, Korea
Search for other works by this author on:
Ho Yun Nam,
Ho Yun Nam
Korea Atomic Energy Research Institute, Taejon, Korea
Search for other works by this author on:
Jong Hyeun Choi,
Jong Hyeun Choi
Korea Atomic Energy Research Institute, Taejon, Korea
Search for other works by this author on:
Hoon Ki Choi
Hoon Ki Choi
Changwon National University, Gyeongnam, Korea
Search for other works by this author on:
Seok-Ki Choi
Korea Atomic Energy Research Institute, Taejon, Korea
Il Kon Choi
Korea Atomic Energy Research Institute, Taejon, Korea
Kil Yong Lee
Korea Atomic Energy Research Institute, Taejon, Korea
Ho Yun Nam
Korea Atomic Energy Research Institute, Taejon, Korea
Jong Hyeun Choi
Korea Atomic Energy Research Institute, Taejon, Korea
Hoon Ki Choi
Changwon National University, Gyeongnam, Korea
Paper No:
PVP2002-1129, pp. 63-70; 8 pages
Published Online:
August 14, 2008
Citation
Choi, S, Choi, IK, Lee, KY, Nam, HY, Choi, JH, & Choi, HK. "Measurement of Pressure Drop in Inclined Triangular and Rotated Triangular Tube Bundles." Proceedings of the ASME 2002 Pressure Vessels and Piping Conference. Thermal Hydraulic Problems, Sloshing Phenomena, and Extreme Loads on Structures. Vancouver, BC, Canada. August 5–9, 2002. pp. 63-70. ASME. https://doi.org/10.1115/PVP2002-1129
Download citation file:
13
Views
Related Proceedings Papers
Related Articles
Numerical Simulations and Analysis of a Low Consumption Hybrid Air Extractor
J. Fluids Eng (December,2017)
Developing Region Solution for High Reynolds Number Laminar Flows of Pseudoplastic and Dilatant Fluids in Circular Ducts
J. Fluids Eng (April,2017)
Pressure Drop for Fully Developed Turbulent Flow in Circular and Noncircular Ducts
J. Fluids Eng (June,2012)
Related Chapters
A Collection of Handy Hydraulic Formulas Based on an Industry-Standard Reference for Pressure Drop Calculations, Incompressible Fluid Flow in Piping and Ducts—Crane Technical Paper No. 410
Hydraulics, Pipe Flow, Industrial HVAC & Utility Systems: Mister Mech Mentor, Vol. 1
Hydraulic Resistance
Heat Transfer & Hydraulic Resistance at Supercritical Pressures in Power Engineering Applications
Field Comparison of Alternative Techniques for Measuring Air Distribution System Leakage
Airflow Performance of Building Envelopes, Components, and Systems