Volumes | Pressure Vessels and Piping Conference | American Society of Mechanical Engineers Digital Collection

Skip Nav Destination

Volume 2: Computer Technology and Bolted Joints; Design and Analysis

Front Matter

PVP2021 Front Matter

PVP 2021; V002T00A001doi:https://doi.org/10.1115/PVP2021-FM2

Abstract

View Articletitled, PVP2021 Front Matter

PDF

Computer Technology and Bolted Joints

Design and Analysis of Bolted Flange Joints

Statistical and Lifetime Characterization of PTFE Materials for Extreme Environments

Sannmit Shinde, Dominic Devito, Meghan Kenny, Ali P. Gordon, Zachary Poust, Jim Drago, Ming-Hang Yang, Paul Nichols

PVP 2021; V002T02A001doi:https://doi.org/10.1115/PVP2021-60521

Abstract

View Articletitled, Statistical and Lifetime Characterization of PTFE Materials for Extreme Environments

PDF

Topics: Compressive stress , Deformation , Experimental design , Fillers (Materials) , Gaskets , Leakage , Load bearing capacity , Manufacturing , Pressure , Relaxation (Physics)

Accurate Evaluation of Bolt and Clamped Members Stiffnesses Of Bolted Joints

Rashique Iftekhar Rousseau, Abdel-Hakim Bouzid, Zijian Zhao

PVP 2021; V002T02A002doi:https://doi.org/10.1115/PVP2021-61621

Abstract

View Articletitled, Accurate Evaluation of Bolt and Clamped Members Stiffnesses Of Bolted Joints

PDF

Topics: Bolted joints , Stiffness

High Temperature Aged Leakage Relaxation Screening Tests on Confined Flexible Graphite Gaskets

Abdel-Hakim Bouzid, Shubhra Kanti Das

PVP 2021; V002T02A003doi:https://doi.org/10.1115/PVP2021-61730

Abstract

View Articletitled, High Temperature Aged Leakage Relaxation Screening Tests on Confined Flexible Graphite Gaskets

PDF

Topics: Gaskets , Graphite , High temperature , Leakage , Oxidation , Relaxation (Physics) , Temperature

Can the Four-Hour Installation Dwell Time Be Reduced?

Carlos D. Girão, Igor Meira, José Carlos Veiga

PVP 2021; V002T02A004doi:https://doi.org/10.1115/PVP2021-61833

Abstract

View Articletitled, Can the Four-Hour Installation Dwell Time Be Reduced?

PDF

Topics: Aeroelasticity , Bolted flanges , Downtime , Elongation , Flanges , Gaskets , Industrial plants , Maintenance , Manufacturing , Stress

Experimental Characterization of the Ageing Behaviour of Anaerobic Threadlockers

Dario Croccolo, Massimiliano De Agostinis, Stefano Fini, Giorgio Olmi, Luca Paiardini, Francesco Robusto

PVP 2021; V002T02A005doi:https://doi.org/10.1115/PVP2021-62422

Abstract

View Articletitled, Experimental Characterization of the Ageing Behaviour of Anaerobic Threadlockers

PDF

Topics: Adhesives , Bolted joints , Experimental characterization , Screws , Statistical analysis , Temperature , Torque

New and Emerging Methods of Analysis and Applications

Stress Analysis of Tubes During Die Expansion Process

Zijian Zhao, Abdel-Hakim Bouzid

PVP 2021; V002T02A006doi:https://doi.org/10.1115/PVP2021-61724

Abstract

View Articletitled, Stress Analysis of Tubes During Die Expansion Process

PDF

Topics: Copper , Experimental methods , Finite element model , Hardening , Kinematics , Leakage , Materials properties , Stainless steel , Stress , Stress analysis (Engineering)

The Elastic Characterization of Composite Based on Ultrasonic Waves

Y. H. Park, J. Dana

PVP 2021; V002T02A007doi:https://doi.org/10.1115/PVP2021-62015

Abstract

View Articletitled, The Elastic Characterization of Composite Based on Ultrasonic Waves

PDF

Topics: Composite materials , Ultrasonic waves , Fatigue failure , Cycles , Damage , Elastic constants , Materials properties , Stiffness , Aerospace industry , Anisotropy

Self-Loosening Behavior of the Nut Due to Tension Change Considering the Inclination of Bearing Surface

Yasumasa Shoji

PVP 2021; V002T02A008doi:https://doi.org/10.1115/PVP2021-62497

Abstract

View Articletitled, Self-Loosening Behavior of the Nut Due to Tension Change Considering the Inclination of Bearing Surface

PDF

Topics: Bearings , Screw threads , Tension , Thread

Optimization for Nuclear Class 1 Opening Reinforcement

Wolf Reinhardt

PVP 2021; V002T02A009doi:https://doi.org/10.1115/PVP2021-62839

Abstract

View Articletitled, Optimization for Nuclear Class 1 Opening Reinforcement

PDF

Topics: ASME Standards , Design , Optimization , Pressure , Vessels

Analysis of Test Method to Extract Material Properties From Candu Fuel Channel Spacers Made of Helical Springs

Donald Metzger, Andre Gagnon, Tejasvi Kashyap

PVP 2021; V002T02A010doi:https://doi.org/10.1115/PVP2021-62917

Abstract

View Articletitled, Analysis of Test Method to Extract Material Properties From Candu Fuel Channel Spacers Made of Helical Springs

PDF

Topics: Fuels , Materials properties , Springs , Finite element analysis , Stress , Testing , Approximation , Boundary-value problems , Friction , Materials degradation

Torsional Fatigue Test Applicable to Helical Spring Material Used in Candu Fuel Channel Spacers

Andre Gagnon, Tejasvi Kashyap, Don Metzger

PVP 2021; V002T02A011doi:https://doi.org/10.1115/PVP2021-63016

Abstract

View Articletitled, Torsional Fatigue Test Applicable to Helical Spring Material Used in Candu Fuel Channel Spacers

PDF

Topics: Fatigue testing , Fuels , Springs , Stress , Structural elements (Construction) , Cycles , Dimensions , Fatigue , Fatigue analysis , Materials degradation

Design and Analysis

6th International Symposium on Code Drum Life Cycle Management

Comparison of Ni-Steel Dissimilar Joints for Coke Drum External Weld Repairs Based on Isothermal Low-Cycle Fatigue Tests

Shutong Zhang, Sebastian Romo, Rafael Arthur Giorjao, Jorge Penso, Haixia Guo, Simon Yuen, Lisa Ely, Antonio J. Ramirez

PVP 2021; V002T03A001doi:https://doi.org/10.1115/PVP2021-62939

Abstract

View Articletitled, Comparison of Ni-Steel Dissimilar Joints for Coke Drum External Weld Repairs Based on Isothermal Low-Cycle Fatigue Tests

PDF

Topics: Coke , Finite element analysis , Low cycle fatigue , Maintenance , Nickel steel

CFD in Design and Analysis

Reactive CFD Simulation of Fixed Coke Formation in an Industrial RFCC Riser Reactor

Sheng Chen, Haoyuan Kang, Mengke Wang, Cenfan Liu, Haitao Lin, Juanbo Liu

PVP 2021; V002T03A002doi:https://doi.org/10.1115/PVP2021-61671

Abstract

View Articletitled, Reactive CFD Simulation of Fixed Coke Formation in an Industrial RFCC Riser Reactor

PDF

Topics: Coke , Computational fluid dynamics , Cracking (Materials) , Energy conservation , Fluids , Fracture (Process) , Pipeline risers , Risers (Casting) , Simulation

CFD Simulation of Cavitation Erosion Behavior in an Impeller of Industrial Lean Amine Liquid Pump

Juanbo Liu, Haitao Lin, Linlin Duan, Li Sun, Meng He, Sheng Chen

PVP 2021; V002T03A003doi:https://doi.org/10.1115/PVP2021-61674

Abstract

View Articletitled, CFD Simulation of Cavitation Erosion Behavior in an Impeller of Industrial Lean Amine Liquid Pump

PDF

Topics: Cavitation , Cavitation erosion , Computational fluid dynamics , Impellers , Pumps , Simulation

The CFD Analysis of Erosion in the Four-Way Pipe of the Heavy Oil Thermal Production Wellhead

Guotao Wang, Chongchong Zhang, Linlin Duan, Li Sun, Cenfan Liu

PVP 2021; V002T03A004doi:https://doi.org/10.1115/PVP2021-61913

Abstract

View Articletitled, The CFD Analysis of Erosion in the Four-Way Pipe of the Heavy Oil Thermal Production Wellhead

PDF

Topics: Computational fluid dynamics , Erosion , Pipes

D and A of Bolted Joints

Sealing Evaluation of Tubesheet-Flanged Joint Under Internal Pressure and Non-Axisymmetry Thermal Loading

Hui Tang, Qianyu Shi, Qi Li, Zhijian Wang, Ming Ma

PVP 2021; V002T03A005doi:https://doi.org/10.1115/PVP2021-60398

Abstract

View Articletitled, Sealing Evaluation of Tubesheet-Flanged Joint Under Internal Pressure and Non-Axisymmetry Thermal Loading

PDF

Topics: Flanges , Gaskets , Pressure , Sealing (Process) , Compressive stress , Stress , Heat exchangers , Water , Compression , Design

D and A of Piping and Components

Perspectives on Fatigue Design of Bellows

Charles Becht, IV

PVP 2021; V002T03A006doi:https://doi.org/10.1115/PVP2021-61072

Abstract

View Articletitled, Perspectives on Fatigue Design of Bellows

PDF

Topics: Bellows (Equipment) , Fatigue design , Fatigue , Bellows expansion joints

In-Plane Flexibility Factor of 90 Degree Long Radius Elbows With Large Diameter

Milad Haji Mohammad Karim

PVP 2021; V002T03A007doi:https://doi.org/10.1115/PVP2021-61533

Abstract

View Articletitled, In-Plane Flexibility Factor of 90 Degree Long Radius Elbows With Large Diameter

PDF

Topics: Finite element analysis , Nozzles , Pipe bends , Pipes , Piping systems , Rotation , Stiffness , Stress analysis (Engineering) , Wall thickness

Assessment of Dynamic High Momentum Slug Loads on Piping Following STHE Tube Rupture

Robert Weyer

PVP 2021; V002T03A008doi:https://doi.org/10.1115/PVP2021-61797

Abstract

View Articletitled, Assessment of Dynamic High Momentum Slug Loads on Piping Following STHE Tube Rupture

PDF

Topics: Momentum , Pipes , Rupture , Shells , Slug flows , Stress

Demonstration of Intelligent Welding Machine for Polyethylene Pipe

Guangte Xiang, Yurui Hu, Sheng Zeng, Jianfeng Shi, Jinyang Zheng

PVP 2021; V002T03A009doi:https://doi.org/10.1115/PVP2021-62014

Abstract

View Articletitled, Demonstration of Intelligent Welding Machine for Polyethylene Pipe

PDF

Topics: Machinery , Polyethylene pipes , Welding

Gasket Design for Alkylation Units & Other Possible Dangerous Liquid Media

Dale Norman, Gustavo Navarrete

PVP 2021; V002T03A010doi:https://doi.org/10.1115/PVP2021-62087

Abstract

View Articletitled, Gasket Design for Alkylation Units & Other Possible Dangerous Liquid Media

PDF

Topics: Design , Gaskets , Stress , Sealing (Process) , Flanges , Structural design , Testing , Damage , Fire testing , Fluids

Evaluation of Load Reduction Effect Due to Through-Wall Crack in Surge Line Under Thermal Stratification Conditions

Seung-Hyun Kim, Hongsun Park, Sun-Yeh Kang, Jong Min Kim

PVP 2021; V002T03A011doi:https://doi.org/10.1115/PVP2021-62118

Abstract

View Articletitled, Evaluation of Load Reduction Effect Due to Through-Wall Crack in Surge Line Under Thermal Stratification Conditions

PDF

Topics: Fracture (Materials) , Leak-before-break , Stress , Surges , Thermal stratification

Influence of Resistor Wire on the Maximum Stress In Electrofusion Joint

Yurui Hu, Guangte Xiang, Jianfeng Shi, Jinyang Zheng

PVP 2021; V002T03A012doi:https://doi.org/10.1115/PVP2021-62123

Abstract

View Articletitled, Influence of Resistor Wire on the Maximum Stress In Electrofusion Joint

PDF

Topics: Finite element analysis , Fittings , Resistors , Stress , Wire

A Comprehensive Review on Failure Analysis of Electrofusion Joint For Plastic Pipes

Zhoutian Ge, Riwu Yao, Jianfeng Shi, Jinyang Zheng

PVP 2021; V002T03A013doi:https://doi.org/10.1115/PVP2021-62132

Abstract

View Articletitled, A Comprehensive Review on Failure Analysis of Electrofusion Joint For Plastic Pipes

PDF

Topics: Failure analysis , Failure mechanisms , Plastic pipes , Stress

D and A of PV, HX, and Components

Structural Integrity Assessment of a Unit Cell in a Laboratory-Scale Printed Circuit Heat Exchanger for Molten Salt Reactors With Supercritical CO₂ Power Cycle

Shuai Che, Sheng Zhang, Adam Burak, Xiaodong Sun

PVP 2021; V002T03A014doi:https://doi.org/10.1115/PVP2021-60735

Abstract

View Articletitled, Structural Integrity Assessment of a Unit Cell in a Laboratory-Scale Printed Circuit Heat Exchanger for Molten Salt Reactors With Supercritical CO<sub>2</sub> Power Cycle

PDF

Topics: Circuits , Computational fluid dynamics , Engineering simulation , Heat exchangers , Molten salt reactors , Simulation , Supercritical carbon dioxide , Thermodynamic power cycles , Stress , Heat transfer

Technical Basis for Proposed ASME Code Case for Construction of Compact Heat Exchangers in High Temperature Reactors

Robert Keating, Suzanne McKillop

PVP 2021; V002T03A015doi:https://doi.org/10.1115/PVP2021-60926

Abstract

View Articletitled, Technical Basis for Proposed ASME Code Case for Construction of Compact Heat Exchangers in High Temperature Reactors

PDF

Topics: ASME Standards , Construction , Heat exchangers , High temperature

Strategies for Application of Reliability and Integrity Management for Inservice Inspection of Compact Heat Exchangers in High Temperature Reactors

Robert Keating, Suzanne McKillop, Ian Jentz

PVP 2021; V002T03A016doi:https://doi.org/10.1115/PVP2021-60931

Abstract

View Articletitled, Strategies for Application of Reliability and Integrity Management for Inservice Inspection of Compact Heat Exchangers in High Temperature Reactors

PDF

Topics: Heat exchangers , High temperature , In-service inspection , Reliability

Study the Integrity of Flange to Gasket Connection Using ASME PCC-1 Under Bolt Tightening and Operating Condition

Balram Kalra, Arun Kumar

PVP 2021; V002T03A017doi:https://doi.org/10.1115/PVP2021-61779

Abstract

View Articletitled, Study the Integrity of Flange to Gasket Connection Using ASME PCC-1 Under Bolt Tightening and Operating Condition

PDF

Topics: Finite element analysis , Flanges , Gaskets

NuScale Pressure and Temperature Limits Methodology Using Finite Element Analysis

Heqin Xu, Joe Remic, Hongqing Xu

PVP 2021; V002T03A018doi:https://doi.org/10.1115/PVP2021-61856

Abstract

View Articletitled, NuScale Pressure and Temperature Limits Methodology Using Finite Element Analysis

PDF

Topics: Finite element analysis , Fracture mechanics , Pressure , Temperature , Brittleness , Cylinders , Design , Ductility , Failure , Finite element model

Estimation of the Stresses in Rotational Autofrettage of Thick-Walled Pressure Vessels Using von Mises Yield Criterion

S. M. Kamal, Faruque Aziz

PVP 2021; V002T03A019doi:https://doi.org/10.1115/PVP2021-61888

Abstract

View Articletitled, Estimation of the Stresses in Rotational Autofrettage of Thick-Walled Pressure Vessels Using von Mises Yield Criterion

PDF

Topics: Autofrettage , Cylinders , Pressure vessels , Stress

Research on Design Method of Hydrogen Storage Pressure Vessel in the Hydrogen Refueling Station Based on Failure Mode

Fang Ji, Xiaoliang Jia, Zhiwei Chen, Cenfan Liu, Linlin Duan

PVP 2021; V002T03A020doi:https://doi.org/10.1115/PVP2021-61901

Abstract

View Articletitled, Research on Design Method of Hydrogen Storage Pressure Vessel in the Hydrogen Refueling Station Based on Failure Mode

PDF

Topics: Design methodology , Failure mechanisms , Hydrogen , Hydrogen storage , Pressure vessels

Development of Minimum Pressurization Temperature Envelopes for Hydroprocessing Reactors - A Case Study

Gurumurthy Kagita, Krishnakant V. Pudipeddi, Penchala S. K. Pottem, Gudimella G. S. Achary, Subramanyam V. R. Sripada

PVP 2021; V002T03A021doi:https://doi.org/10.1115/PVP2021-61954

Abstract

View Articletitled, Development of Minimum Pressurization Temperature Envelopes for Hydroprocessing Reactors - A Case Study

PDF

Topics: Fracture mechanics , Hydrogen embrittlement , Temperature

Applicability of Design Rules for Openings in Shells, ASME B&PV Code, Section VIII, Division 2 - A Case Study

Gurumurthy Kagita, Krishnakant V. Pudipeddi, Subramanyam V. R. Sripada

PVP 2021; V002T03A022doi:https://doi.org/10.1115/PVP2021-62020

Abstract

View Articletitled, Applicability of Design Rules for Openings in Shells, ASME B&PV Code, Section VIII, Division 2 - A Case Study

PDF

Topics: Design , Finite element analysis , Pressure , Shells , Nozzles , Stress , Junctions , Stress analysis (Engineering) , Boilers , Failure mechanisms

Correlating Incident Heat Flux and Source Temperature to Meet ASTM E1529 Requirements for RAM Packaging Components Thermal Testing

Austin R. Baird, Walt Gill, Hector Mendoza, Victor Figueroa

PVP 2021; V002T03A023doi:https://doi.org/10.1115/PVP2021-62039

Abstract

View Articletitled, Correlating Incident Heat Flux and Source Temperature to Meet ASTM E1529 Requirements for RAM Packaging Components Thermal Testing

PDF

Topics: ASTM International , Heat flux , Packaging , Temperature , Testing

Alternative Nozzle Reinforcement Rules for Gasketed Plate Heat Exchangers

Milan Nikic, Djordje Srnic

PVP 2021; V002T03A024doi:https://doi.org/10.1115/PVP2021-62106

Abstract

View Articletitled, Alternative Nozzle Reinforcement Rules for Gasketed Plate Heat Exchangers

PDF

Topics: Heat exchangers , Nozzles

Validation of Modern Finite Analysis Methods for Glassy Polymers Using Historical Studies

Bart Kemper

PVP 2021; V002T03A025doi:https://doi.org/10.1115/PVP2021-62146

Abstract

View Articletitled, Validation of Modern Finite Analysis Methods for Glassy Polymers Using Historical Studies

PDF

Topics: Design , Design methodology , Dimensions , Finite element analysis , Geometry , Polymers , Pressure vessels , Safety , Shapes , Thin wall structures

A Unified Constitutive Model for Diffusion Bonded Alloy 800H To Perform Full Inelastic Analysis of Components in High Temperature Nuclear Service

Heramb P. Mahajan, Tasnim Hassan

PVP 2021; V002T03A026doi:https://doi.org/10.1115/PVP2021-62952

Abstract

View Articletitled, A Unified Constitutive Model for Diffusion Bonded Alloy 800H To Perform Full Inelastic Analysis of Components in High Temperature Nuclear Service

PDF

Topics: Alloys , Constitutive equations , Creep , Diffusion (Physics) , Fatigue , High temperature , Inelastic analysis

A Comparative Study of Radial Nozzle Criteria; Section VIII, Division 2, Part 4.5.5 to Part 5.2.2

Craig Boyak

PVP 2021; V002T03A027doi:https://doi.org/10.1115/PVP2021-66583

Abstract

View Articletitled, A Comparative Study of Radial Nozzle Criteria; Section VIII, Division 2, Part 4.5.5 to Part 5.2.2

PDF

Topics: Elastic analysis , Nozzles

Evaluation and Counter Measure for Beyond Design Basis Event

Design of Piping Systems for Accidental Explosion and Fire Events

Necip Onder Akinci, James Loudoun, Krishna Parvathaneni, Hyun-Su Kim

PVP 2021; V002T03A028doi:https://doi.org/10.1115/PVP2021-61650

Abstract

View Articletitled, Design of Piping Systems for Accidental Explosion and Fire Events

PDF

Topics: Design , Explosions , Failure , Fire , Pipes , Piping design , Resilience

Proposal of Simulation Material Test Technique for Clarifying the Structure Failure Mechanisms Under Excessive Seismic Loads

Ryuta Hashidate, Shoichi Kato, Takashi Onizawa, Takashi Wakai, Naoto Kasahara

PVP 2021; V002T03A029doi:https://doi.org/10.1115/PVP2021-61866

Abstract

View Articletitled, Proposal of Simulation Material Test Technique for Clarifying the Structure Failure Mechanisms Under Excessive Seismic Loads

PDF

Topics: Constitutive equations , Failure mechanisms , Lead alloys , Simulation , Stress

Dynamic Behavior of a Simplified Cantilever With Progressive Static Loading due to Ratchet Deformation

Satoru Kai, Naoto Kasahara, Masakazu Ichimiya

PVP 2021; V002T03A030doi:https://doi.org/10.1115/PVP2021-61878

Abstract

View Articletitled, Dynamic Behavior of a Simplified Cantilever With Progressive Static Loading due to Ratchet Deformation

PDF

Topics: Cantilevers , Deformation , Failure mechanisms , Failure , Accidents , Excitation , Stress , Weight (Mass) , Collapse , Cycles

Example Proposals of Fracture Controlled Vessels and Piping for Failure Mitigations

Naoto Kasahara, Takashi Wakai, Izumi Nakamura, Takuya Sato, Masakazu Ichimiya

PVP 2021; V002T03A031doi:https://doi.org/10.1115/PVP2021-61952

Abstract

View Articletitled, Example Proposals of Fracture Controlled Vessels and Piping for Failure Mitigations

PDF

Topics: Design , Failure , Fracture (Materials) , Fracture (Process) , Pipes , Vessels

Fatigue

Development of New Design Fatigue Curves in Japan – Treatment of Variable Loading Amplitude Effect

Seiji Asada, Yuichiro Nomura

PVP 2021; V002T03A032doi:https://doi.org/10.1115/PVP2021-60418

Abstract

View Articletitled, Development of New Design Fatigue Curves in Japan – Treatment of Variable Loading Amplitude Effect

PDF

Topics: Design , Fatigue

Effects of a Single Overload on Fatigue Crack Growth of Type 316 Stainless Steel

Koji Miyoshi, Masayuki Kamaya

PVP 2021; V002T03A033doi:https://doi.org/10.1115/PVP2021-61513

Abstract

View Articletitled, Effects of a Single Overload on Fatigue Crack Growth of Type 316 Stainless Steel

PDF

Topics: Fatigue cracks , Fracture (Materials) , Stainless steel

Fatigue Life Calculation Method of 4130X High Pressure Hydrogen Storage Cylinder With Initial Crack Defect

Peng Ge, Zhiping Chen, Mengjie Liu

PVP 2021; V002T03A034doi:https://doi.org/10.1115/PVP2021-61530

Abstract

View Articletitled, Fatigue Life Calculation Method of 4130X High Pressure Hydrogen Storage Cylinder With Initial Crack Defect

PDF

Topics: Computational methods , Cylinders , Fatigue life , Fracture (Materials) , Fracture mechanics , High pressure (Physics) , Hydrogen storage

Explicit Finite Element Fatigue Crack Growth Analysis of An Instrumentation Ring Under Thermal Transient Loading

Joshua B. B. Selling, James E. Holliday, Thomas M. Damiani

PVP 2021; V002T03A035doi:https://doi.org/10.1115/PVP2021-62207

Abstract

View Articletitled, Explicit Finite Element Fatigue Crack Growth Analysis of An Instrumentation Ring Under Thermal Transient Loading

PDF

Topics: Fatigue cracks , Finite element analysis , Instrumentation , Transients (Dynamics)

Microstructural Based FEM-Calculation of Stress/Strain Fields in Steel AISI 316L and Its Validation by Digital Image Correlation

M. Niffenegger, V. Herrera Solaz

PVP 2021; V002T03A036doi:https://doi.org/10.1115/PVP2021-62779

Abstract

View Articletitled, Microstructural Based FEM-Calculation of Stress/Strain Fields in Steel AISI 316L and Its Validation by Digital Image Correlation

PDF

Topics: Crystals , Electron backscatter diffraction , Fatigue , Finite element analysis , Finite element model , Plasticity , Steel , Stress , Anisotropy , Fracture (Materials)

Fitness for Service Evaluations

Numerical Study on the Strain Capacity of Girth-Weld Pipes With Unequal Wall Thickness Transition Joints

Xu Wang, Jian Shuai, Shengzhu Zhang

PVP 2021; V002T03A037doi:https://doi.org/10.1115/PVP2021-61022

Abstract

View Articletitled, Numerical Study on the Strain Capacity of Girth-Weld Pipes With Unequal Wall Thickness Transition Joints

PDF

Topics: Fracture (Materials) , Pipes , Wall thickness

Numerical Study on the Re-Rounding Process of Dented Pipelines

Pengcheng Zhao, Jian Shuai

PVP 2021; V002T03A038doi:https://doi.org/10.1115/PVP2021-61358

Abstract

View Articletitled, Numerical Study on the Re-Rounding Process of Dented Pipelines

PDF

Topics: Pipelines , Pressure , Computer simulation , Damage , Finite element analysis , Finite element methods , Pipes , Plastic scrap , Safety , Stress

Hydrogen Induced Cracking Damage Estimation and Evaluation

Kannan Subramanian, Jorge Penso

PVP 2021; V002T03A039doi:https://doi.org/10.1115/PVP2021-61887

Abstract

View Articletitled, Hydrogen Induced Cracking Damage Estimation and Evaluation

PDF

Topics: Damage , Fitness-for-service , Fracture (Process) , Hydrogen , Tensile testing , Collapse , Fracture (Materials) , American Petroleum Institute , Inspection , Ultrasonic testing

Fracture

Failure Strain Criterion Accounting for the Effect of Material Strength

N. Baghous, I. Barsoum

PVP 2021; V002T03A040doi:https://doi.org/10.1115/PVP2021-60402

Abstract

View Articletitled, Failure Strain Criterion Accounting for the Effect of Material Strength

PDF

Topics: Accounting , Failure , Finite element analysis , Strength (Materials) , Stress

Fracture Mechanics Assessment of Hydrogen Storage Vessel

Xiaoliang Jia, Zhiwei Chen, Fang Ji

PVP 2021; V002T03A041doi:https://doi.org/10.1115/PVP2021-60601

Abstract

View Articletitled, Fracture Mechanics Assessment of Hydrogen Storage Vessel

PDF

Topics: Fatigue life , Fracture mechanics , Hydrogen storage , Stress , Vessels

Vibration Propagation Analysis of Periodic Pipeline With Crack Defects

Donghui Wang, Qingna Zeng, Fenggang Zang, Yixiong Zhang

PVP 2021; V002T03A042doi:https://doi.org/10.1115/PVP2021-60988

Abstract

View Articletitled, Vibration Propagation Analysis of Periodic Pipeline With Crack Defects

PDF

Topics: Composite materials , Damage , Energy gap , Fracture (Materials) , Frequency response , Pipelines , Vibration

Numerical Analysis of the Crack Driving Force of Mismatched Girth Welded Pipes Subject to Large Plastic Deformations

Kai Wu, Hong Zhang, Yue Yang, Xiaoben Liu

PVP 2021; V002T03A043doi:https://doi.org/10.1115/PVP2021-61188

Abstract

View Articletitled, Numerical Analysis of the Crack Driving Force of Mismatched Girth Welded Pipes Subject to Large Plastic Deformations

PDF

Topics: Deformation , Fracture (Materials) , Numerical analysis , Pipes

Crack Propagation Calculation for Axial Cracks in Hollow Cylinders Subjected to Thermal Shock

Diego F. Mora M., Markus Niffenegger

PVP 2021; V002T03A044doi:https://doi.org/10.1115/PVP2021-61406

Abstract

View Articletitled, Crack Propagation Calculation for Axial Cracks in Hollow Cylinders Subjected to Thermal Shock

PDF

Topics: Algorithms , Crack propagation , Cylinders , Fracture (Materials) , Stress , Thermal shock , Weight (Mass)

An Application of the Brittle Fracture Criterion Gp Method to a RPV Type Geometry – Towards the Industrialization of the Method

Bin Zheng, Han Liu, Samuel Jules, Hai Xie, Kaikai Shi

PVP 2021; V002T03A045doi:https://doi.org/10.1115/PVP2021-61636

Abstract

View Articletitled, An Application of the Brittle Fracture Criterion Gp Method to a RPV Type Geometry – Towards the Industrialization of the Method

PDF

Topics: Brittle fracture , Geometry , Fracture (Materials) , China , Computer software , Damage , Energy conservation , Finite element analysis , Irradiation (Radiation exposure) , Life extension

Determination of Crack-Initiation in Fracture Toughness Testing Using an Experimental Key-Curve Methodology

S. Pothana, G. Wilkowski, S. Kalyanam, J. K. Hong, C. J. Sallaberry

PVP 2021; V002T03A046doi:https://doi.org/10.1115/PVP2021-61812

Abstract

View Articletitled, Determination of Crack-Initiation in Fracture Toughness Testing Using an Experimental Key-Curve Methodology

PDF

Topics: Fracture (Materials) , Fracture toughness , Testing , Stress , Fittings , Instrumentation , ASTM International , Deformation , Displacement , Electric potential

Temperature Dependent Failure Behaviour of Components Containing Crack Fields: An Experimental and Numerical Approach

Stefan Weihe, Ludwig Stumpfrock, Ulrich Weber, Patrick Gauder, Michael Seidenfuss

PVP 2021; V002T03A047doi:https://doi.org/10.1115/PVP2021-61998

Abstract

View Articletitled, Temperature Dependent Failure Behaviour of Components Containing Crack Fields: An Experimental and Numerical Approach

PDF

Topics: Failure , Fracture (Materials) , Temperature

Numerical Investigation of Ductile Fracture in Pipelines Under Complex Loading Using a Phenomenological Damage Model

Iago S. Santos, Diego F. B. Sarzosa

PVP 2021; V002T03A048doi:https://doi.org/10.1115/PVP2021-62017

Abstract

View Articletitled, Numerical Investigation of Ductile Fracture in Pipelines Under Complex Loading Using a Phenomenological Damage Model

PDF

Topics: Damage , Ductile fracture , Pipelines

Failure Modes for Acrylic Polymers in Section VIII Pressure Vessels

Bart Kemper, Guy Richards, Taylor Nappi, Veda Thipparthi, Ana Escobar

PVP 2021; V002T03A049doi:https://doi.org/10.1115/PVP2021-62148

Abstract

View Articletitled, Failure Modes for Acrylic Polymers in Section VIII Pressure Vessels

PDF

Topics: Design , Failure mechanisms , Polymers , Pressure vessels

Calculation of Outer Crack Stress Intensity Factors for Nozzle Junctions in Cylindrical Pressure Vessels Using FCPAS

Murat Bozkurt, David Nash, Asraf Uzzaman

PVP 2021; V002T03A050doi:https://doi.org/10.1115/PVP2021-64385

Abstract

View Articletitled, Calculation of Outer Crack Stress Intensity Factors for Nozzle Junctions in Cylindrical Pressure Vessels Using FCPAS

PDF

Topics: Finite element analysis , Fracture (Materials) , Junctions , Nozzles , Pressure vessels , Stress

Inelastic, Nonlinear, and Limit Load Analysis

Cyclic Stress-Strain Curve of Austenitic Stainless Steels Applicable to Elastic-Plastic Stress Analysis

Seiji Asada, Yuichiro Nomura

PVP 2021; V002T03A051doi:https://doi.org/10.1115/PVP2021-60525

Abstract

View Articletitled, Cyclic Stress-Strain Curve of Austenitic Stainless Steels Applicable to Elastic-Plastic Stress Analysis

PDF

Topics: Stainless steel , Stress analysis (Engineering) , Stress-strain curves

Comparative Research on Nonlinear Analysis Method Technique for the Failure Modes Based on RCC-M Annex ZC

Xuejiao Shao, Hai Xie, Furui Xiong, Xiaolong Fu, Jun Tian, Ying Zhang, Kaikai Shi, Mingda Yu

PVP 2021; V002T03A052doi:https://doi.org/10.1115/PVP2021-62035

Abstract

View Articletitled, Comparative Research on Nonlinear Analysis Method Technique for the Failure Modes Based on RCC-M Annex ZC

PDF

Topics: Cycles , Failure mechanisms

Piping and Equipment Dynamics and Dynamic Response Analysis

A Simplified Method for Analyzing Pressure Vessel Response to An External Blast Overpressure Generated From an Explosion

Jacob Hundl, Barry Millet, Bryan Mosher, Kenneth Kirkpatrick

PVP 2021; V002T03A053doi:https://doi.org/10.1115/PVP2021-61854

Abstract

View Articletitled, A Simplified Method for Analyzing Pressure Vessel Response to An External Blast Overpressure Generated From an Explosion

PDF

Topics: Explosions , Liquefied natural gas , Pressure vessels , Finite element analysis , Computational fluid dynamics , Computer software , Construction , Design , Failure , Nuclear weapons

Study on Method of Response under Turbulence Excitation of Steam Generator Heat Transfer Tube in Two-Phase Flow

Xuan Huang, Shuai Liu, Zhipeng Feng, Guo Chen, Wanjun Wu, Xiaozhou Jiang

PVP 2021; V002T03A054doi:https://doi.org/10.1115/PVP2021-61986

Abstract

View Articletitled, Study on Method of Response under Turbulence Excitation of Steam Generator Heat Transfer Tube in Two-Phase Flow

PDF

Topics: Boilers , Excitation , Flow-induced vibrations , Heat transfer , Spectral energy distribution , Turbulence , Two-phase flow

Research on Numerical Calculation Model of Impact Load on Reef in Deep Sea

Shuai Liu, Xuan Huang, Zhipeng Feng, Xiaozhou Jiang, Bihao Wang, Wanjun Wu

PVP 2021; V002T03A055doi:https://doi.org/10.1115/PVP2021-62110

Abstract

View Articletitled, Research on Numerical Calculation Model of Impact Load on Reef in Deep Sea

PDF

Topics: Fluid structure interaction , Seas , Stress

Special Considerations in the Design and Analysis of Supports, Restraints, and Welded Attachments

Case Study of Supplemental Steel Structures

Phillip Wiseman, Raju Subedi

PVP 2021; V002T03A056doi:https://doi.org/10.1115/PVP2021-62077

Abstract

View Articletitled, Case Study of Supplemental Steel Structures

PDF

Topics: Steel

Effect of Piping System Vibration (FIV, AIV, PIV) on Pipe Support Loads

Emmanuel Appiah, Phillip Wiseman

PVP 2021; V002T03A057doi:https://doi.org/10.1115/PVP2021-62080

Abstract

View Articletitled, Effect of Piping System Vibration (FIV, AIV, PIV) on Pipe Support Loads

PDF

Topics: Pipes , Piping systems , Stress , Vibration , Design , Excitation , Acoustics , Chemical industry , Construction , Engineering design processes

Case Study to Evaluate Stresses in Welded Endplates in Structural Steel

Kshitij P. Gawande, Alex Mayes, Raju Subedi

PVP 2021; V002T03A058doi:https://doi.org/10.1115/PVP2021-62084

Abstract

View Articletitled, Case Study to Evaluate Stresses in Welded Endplates in Structural Steel

PDF

Topics: Finite element analysis , Steel , Stress , Structural steel , Design , Finite element model , Flanges , Pipes , Stress concentration , Vibration

Supports for Non-Metallic Large Diameter Pipes

Bhaskar Shitole, Cynthia Heinrichs

PVP 2021; V002T03A059doi:https://doi.org/10.1115/PVP2021-62935

Abstract

View Articletitled, Supports for Non-Metallic Large Diameter Pipes

PDF

Topics: Pipes

Thermal Stresses and Elevated Temperature Design

Proposed Method to Map the Elastic Follow-Up 3D Distribution Time History Using Finite Element Methods

Michael Breach

PVP 2021; V002T03A060doi:https://doi.org/10.1115/PVP2021-61605

Abstract

View Articletitled, Proposed Method to Map the Elastic Follow-Up 3D Distribution Time History Using Finite Element Methods

PDF

Topics: Boilers , Creep , Design , Displacement , Finite element methods , Finite element model , Pipes , Piping systems , Plasticity , Pressure

Application of Load Release Factor Method in Thermal Expansion Load Imposed on Vessel Nozzle

Xiangbing Zhang, Chenghong Duan, Mingwan Lu, Xiangpeng Luo

PVP 2021; V002T03A061doi:https://doi.org/10.1115/PVP2021-61676

Abstract

View Articletitled, Application of Load Release Factor Method in Thermal Expansion Load Imposed on Vessel Nozzle

PDF

Topics: Nozzles , Pipelines , Pressure vessels , Stress , Thermal expansion , Vessels

Numerical Investigation on Local Thermal Buckling Behaviours of Buried Large Diameter Heating Pipeline

Yue Yang, Hong Zhang, Xiaoben Liu, Weilun Fang, Lei Sun, Jibei Feng, Mingxu Gao

PVP 2021; V002T03A062doi:https://doi.org/10.1115/PVP2021-61959

Abstract

View Articletitled, Numerical Investigation on Local Thermal Buckling Behaviours of Buried Large Diameter Heating Pipeline

PDF

Topics: Buckling , Heating , Pipelines

Fracture Analysis of Reactor Pressure Vessel Lower Head Considering Core Meltdown Accident

Yaroslav Dubyk, Vitalii Antonchenko, Maksym Zarazovskii

PVP 2021; V002T03A063doi:https://doi.org/10.1115/PVP2021-62062

Abstract

View Articletitled, Fracture Analysis of Reactor Pressure Vessel Lower Head Considering Core Meltdown Accident

PDF

Topics: Accidents , Fracture (Materials) , Reactor vessels , Vessels , Boundary-value problems , Cavities , Cooling , Creep , Floods , Fracture mechanics