Volumes | Pressure Vessels and Piping Conference | American Society of Mechanical Engineers Digital Collection

Topics: Alloys , ASME Boiler and Pressure Vessel Code , Boilers , Creep , Fatigue , Fatigue failure , Pressure vessels , Probability , Reliability , Rupture

Consideration on Fatigue Crack Growth Thresholds Under Negative Stress Ratio

Kunio Hasegawa, Saburo Usami, Valery Lacroix

PVP 2019; V001T01A004doi:https://doi.org/10.1115/PVP2019-93870

Abstract

View Article

PDF

Topics: Fatigue cracks , Stress , Fitness-for-service , ASTM International , Fracture (Materials) , Testing

Technical Basis for Expansion of ASME BPVC Section XI, KIC Curve Applicability

Hongqing Xu, Nathan Palm, Anees Udyawar

PVP 2019; V001T01A005doi:https://doi.org/10.1115/PVP2019-93988

Abstract

View Article

PDF

Topics: ASME Boiler and Pressure Vessel Code , Base metals , Failure , Fracture (Materials) , Fracture mechanics , Fracture toughness , Heat , Metals , Pressure vessels , Steel

Application Examples of ASME Code Case N-513 Implementation

Robert O. McGill, Russell C. Cipolla, Eric J. Houston, Ronald J. Janowiak

PVP 2019; V001T01A006doi:https://doi.org/10.1115/PVP2019-94009

Abstract

View Article

PDF

Topics: ASME Standards , Gates (Closures) , Leakage , Pipes , Public utilities , Safety , Valves

Technical Basis Document for Alloy 82/182 Weld Inspection Code Case N-770 Through N-770-6

Paul Donavin, Warren Bamford, Stephen Marlette

PVP 2019; V001T01A007doi:https://doi.org/10.1115/PVP2019-94080

Abstract

View Article

PDF

Topics: Alloys , Inspection , Maintenance , Stress corrosion cracking , Water

Developments in HDPE and Non-Metallic Pipe Codes and Standards

Sustained Pressure Test Results for Surface Scratches in PE4710, Cell Classification 445574C High Density Polyethylene Pipe Material

Jason Hebeisen, Timothy M. Adams, Douglas Munson

PVP 2019; V001T01A008doi:https://doi.org/10.1115/PVP2019-93071

Abstract

View Article

PDF

Topics: Density , Polyethylene pipes , Pressure , Pipes , ASME Boiler and Pressure Vessel Code , Stress , Testing , Failure , Fracture (Materials) , Resins

Development of Chinese Standard on Ultrasonic Inspection for Electrofusion Joint of Polyethylene Pipe

Weican Guo, Yangji Tao, Jianfeng Shi, Cunjian Miao, Haijian Zhong, Jinyang Zheng

PVP 2019; V001T01A009doi:https://doi.org/10.1115/PVP2019-93499

Abstract

View Article

PDF

Topics: Inspection , Polyethylene pipes , Safety

Technical Basis for Maximum Allowable Indentation Depths in HDPE Pipes for Proposed ASME Section III Code Case on Alternative Requirements to Appendix XXVI for Inspection and Repair

Douglas Scarth, Prabhat Krishnaswamy, Phillip Rush, Douglas Munson

PVP 2019; V001T01A010doi:https://doi.org/10.1115/PVP2019-93767

Abstract

View Article

PDF

Topics: Inspection , Maintenance , Pipes

Environmental Fatigue Issues (Joint With M&F)

Environmentally Assisted Fatigue Data From the INCEFA-PLUS Project

Matthias Bruchhausen, Alec McLennan, Roman Cicero, Caitlin Huotilainen, Kevin Mottershead, Jean-Christophe le Roux, Marc Vankeerberghen

PVP 2019; V001T01A011doi:https://doi.org/10.1115/PVP2019-93085

Abstract

View Article

PDF

Topics: Fatigue , Light water reactors , Steel , Experimental design , Fatigue damage , Fatigue testing , Finishes , Heat , Nuclear power stations

Environmentally-Assisted Fatigue Behavior of 316 Stainless Steels in Simulated PWR Primary Environment: Strain Holding, Zn-Addition, and Their Combined Effect

Hyeon Bae Lee, Ho-Sub Kim, Junjie Chen, Changheui Jang, Tae Soon Kim, Gary L. Stevens, Kawaljit Ahluwalia

PVP 2019; V001T01A012doi:https://doi.org/10.1115/PVP2019-93134

Abstract

View Article

PDF

Topics: Fatigue , Pressurized water reactors , Stainless steel , Hardening , Corrosion resistance , Dislocation density , Dislocations , Fracture (Materials) , Low cycle fatigue

Study on Effects of Non-Isothermal Condition and Strain Holding on Environmentally Assisted Fatigue in PWR Primary Water Environment (Step III)

Daiki Takagoshi, Seiji Asada, Yuichirou Nomura, Gary Stevens, Kawaljit Ahluwalia

PVP 2019; V001T01A013doi:https://doi.org/10.1115/PVP2019-93271

Abstract

View Article

PDF

Topics: Fatigue , Pressurized water reactors , Water , Electric arc furnaces , Transients (Dynamics) , Fatigue testing , Stainless steel , Stress , Temperature , Testing

INCEFA-PLUS: Increasing Safety in NPPs by Covering Gaps in Environmental Fatigue Assessment

Kevin Mottershead, Matthias Bruchhausen, Sergio Cicero, Sam Cuvilliez

PVP 2019; V001T01A014doi:https://doi.org/10.1115/PVP2019-93276

Abstract

View Article

PDF

Topics: Fatigue , Nuclear power stations , Safety

Strain-Controlled Low Cycle Fatigue of Stainless Steel in PWR Water

Tommi Seppänen, Jouni Alhainen, Esko Arilahti, Jussi Solin

PVP 2019; V001T01A015doi:https://doi.org/10.1115/PVP2019-93279

Abstract

View Article

PDF

Topics: Fatigue , Low cycle fatigue , Pressurized water reactors , Stainless steel , Water

Particular Fatigue Resistance of Stabilized Stainless Steel: Endurance Limit, Strength and Ductility of Fatigued Steel

Jussi Solin, Jouni Alhainen, Esko Arilahti, Tommi Seppänen, Wolfgang Mayinger

PVP 2019; V001T01A016doi:https://doi.org/10.1115/PVP2019-93317

Abstract

View Article

PDF

Topics: Ductility , Endurance limit , Fatigue , Stainless steel , Steel

A Critical Review of Recent Fatigue Crack Growth Data in Relation to ASME Code Case N-809

Jonathan Mann, Chris Currie, David Tice, Norman Platts

PVP 2019; V001T01A017doi:https://doi.org/10.1115/PVP2019-93563

Abstract

View Article

PDF

Topics: ASME Standards , Fatigue cracks , Stainless steel

Fatigue of NPP Components Simulated by Non-Uniformly Strained Stainless Steel Specimens

Jussi Solin, Jouni Alhainen, Esko Arilahti, Tommi Seppänen, Wolfgang Mayinger

PVP 2019; V001T01A018doi:https://doi.org/10.1115/PVP2019-93833

Abstract

View Article

PDF

Topics: Fatigue , Hardening , Nuclear power stations , Stainless steel

Scaling of SN Curves for Varying ‘Initiation’ Crack Definitions From Striation Counted Environmental Fatigue Specimens: A 250 Micron Austenitic Stainless Steel SN Curve and Associated Fen Factors

Joseph Batten, Chris Currie, Jonathan Mann, Keith Wright

PVP 2019; V001T01A019doi:https://doi.org/10.1115/PVP2019-93847

Abstract

View Article

PDF

Topics: Fatigue , Fracture (Materials) , Stainless steel , Design , Pressurized water reactors , Strain gradient , Stress , Carbon dioxide , Cooling , Cycles

Critical Review of Strain Measures for Characterisation of Fatigue Damage in ASME Section III Fatigue Assessments

Daniel Leary, Chris Currie, Keith Wright

PVP 2019; V001T01A020doi:https://doi.org/10.1115/PVP2019-93849

Abstract

View Article

PDF

Topics: Fatigue , Fatigue damage , Stress , ASME Standards , Pipes , Design , Fracture (Materials) , Plane strain , Pressure vessel construction , Reactor vessels

Extension of Weighted Stress Intensity Factor Rate (WKR) Method to Characterisation of Varying Temperature and Loading Rate in Plant Realistic Waveform Fatigue Crack Growth Calculations

Chris Currie, Jonathan Mann, Peter Gill, Daniel Leary, Keith Wright

PVP 2019; V001T01A021doi:https://doi.org/10.1115/PVP2019-93855

Abstract

View Article

PDF

Topics: Fatigue cracks , Pressurized water reactors , Stainless steel , Stress , Temperature

Important Effects in Environmentally Assisted Fatigue (EAF) of Austenitic and Ferritic Steel Components Including Welds and Their Consideration in a Fatigue Assessment Concept

Jürgen Rudolph, Matthias Herbst, Armin Roth, Christian Swacek, Tim Schopf

PVP 2019; V001T01A022doi:https://doi.org/10.1115/PVP2019-93913

Abstract

View Article

PDF

Topics: Electric arc furnaces , Fatigue , Stainless steel , Steel , Welded joints

Fatigue Initiation of 304L Stainless Steel Subject to Thermal Shock Loading in a PWR Environment

Peter Gill, Peter Brown, David Tice, Norman Platts, Chris Currie

PVP 2019; V001T01A023doi:https://doi.org/10.1115/PVP2019-93923

Abstract

View Article

PDF

Topics: Fatigue , Pressurized water reactors , Stainless steel , Thermal shock , Cycles , Temperature , Transients (Dynamics) , Stress , Testing , Design

Tensile Behavior of 82/182 Filler, Butter and Heat-Affected-Zones in a 508 LAS - 316 SS Dissimilar Weld: Tensile Test, Material Model and Finite Element Model Validation

Subhasish Mohanty, Joseph Listwan, Saurindranath Majumdar, Krishnamurti Natesan

PVP 2019; V001T01A024doi:https://doi.org/10.1115/PVP2019-93952

Abstract

View Article

PDF

Topics: Fillers (Materials) , Finite element model , Heat , Testing equipment , Modeling , Damage , Finite element analysis , Hardening , Low cycle fatigue , Plasticity

Implementation and Validation of a Fully Mechanistic Fatigue Modeling Approach in a High Performance Computing Framework

Bipul Barua, Subhasish Mohanty, Saurindranath Majumdar, Krishnamurti Natesan

PVP 2019; V001T01A025doi:https://doi.org/10.1115/PVP2019-93954

Abstract

View Article

PDF

Topics: Fatigue , Modeling , Cycles , Fatigue life , Uncertainty , Computer software , Finite element analysis , Nuclear reactors , Pipes , Pressurized water reactors

Time-Series Fatigue Damage States Forecasting and Probabilistic Environmental Fatigue Life Prediction Using Markov-Chain-Monte-Carlo Techniques

Jae Phil Park, Subhasish Mohanty, Chi Bum Bahn

PVP 2019; V001T01A026doi:https://doi.org/10.1115/PVP2019-93955

Abstract

View Article

PDF

Topics: Chain , Fatigue damage , Fatigue life , Time series

Environmental Fatigue Management for Long Time Operation: Finnish Point of View

Jussi Solin, Tommi Seppänen, Petri Lemettinen, Juha Isometsä, Erkki Pulkkinen

PVP 2019; V001T01A027doi:https://doi.org/10.1115/PVP2019-94015

Abstract

View Article

PDF

Topics: Fatigue , Fatigue design

Fatigue and Ratcheting Issues in Pressure Vessel and Piping Design

Mode I Ductile Crack Growth of 1TCT Specimen Under Large Cyclic Loading: Part III

Kiminobu Hojo

PVP 2019; V001T01A028doi:https://doi.org/10.1115/PVP2019-93476

Abstract

View Article

PDF

Topics: Ductile fracture , Stress , Fitness-for-service , Fracture (Materials) , Japan Society of Mechanical Engineers , Computational methods , Fatigue cracks , Hardening , Pipes , Piping systems

Method B Fatigue Screening in ASME BPV Code, Section VIII, Division 2, Part 5

Kenneth Kirkpatrick, Christopher R. Johnson, J. Adin Mann, III

PVP 2019; V001T01A029doi:https://doi.org/10.1115/PVP2019-93812

Abstract

View Article

PDF

Topics: Fatigue , ASME Boiler and Pressure Vessel Code , Damage , Fatigue analysis , Fatigue damage , Pressure , Stress

Ratcheting due to Thermal Stratification

R. Adibi-Asl, D. O’Kane, E. Chen

PVP 2019; V001T01A030doi:https://doi.org/10.1115/PVP2019-94043

Abstract

View Article

PDF

Topics: Finite element analysis , Thermal stratification

Fatigue Assessment and Management: A Probabilistic Perspective

Lower Tail Estimation of Fatigue Life

D. Gary Harlow

PVP 2019; V001T01A031doi:https://doi.org/10.1115/PVP2019-93104

Abstract

View Article

PDF

Topics: Fatigue life , Stress , Uncertainty , Aluminum alloys , Cycles , Errors , Fatigue , Life testing , Manufacturing , Modeling

Uncertainty Quantification and Sensitivity Analysis for Net Section Collapse Criterion of Pipes Under Pressure and Bending

Y. S. Garud, Gary L. Stevens

PVP 2019; V001T01A032doi:https://doi.org/10.1115/PVP2019-93867

Abstract

View Article

PDF

Topics: Collapse , Pipes , Pressure , Sensitivity analysis , Uncertainty quantification

Fatigue Monitoring and Related Assessment Method

Fatigue Assessment and Monitoring of a Dented Pipeline Specimen

J. L. F. Freire, V. E. L. Paiva, G. L. G. Gonzáles, R. D. Vieira, J. E. Maneschy, A. L. F. S. D’Almeida, A. S. Ribeiro

PVP 2019; V001T01A033doi:https://doi.org/10.1115/PVP2019-93663

Abstract

View Article

PDF

Topics: Fatigue , Pipelines , Thermoelasticity

Evaluation of Fatigue Crack Growth at Piping of Austenitic Stainless Steel Under Biaxial Stress

Shogo Harada, Takanori Kitada, Takao Nakamura

PVP 2019; V001T01A034doi:https://doi.org/10.1115/PVP2019-93909

Abstract

View Article

PDF

Topics: Fatigue cracks , Pipes , Stainless steel , Stress , Fatigue testing , Fatigue , Machinery , Nuclear power stations , ASME Standards , Design

Determination of Inspection Intervals Based on Realistic Load Monitoring and Fracture Mechanics

Jürgen Rudolph, Steffen Bergholz, Dalibor Jerinic, Detlef Rieck

PVP 2019; V001T01A035doi:https://doi.org/10.1115/PVP2019-93914

Abstract

View Article

PDF

Topics: Fracture mechanics , Inspection , Stress , Fatigue , Concretes , Condition monitoring , Creep , Cycles , Damage , Fatigue analysis

Fracture Toughness and Other Small Specimen Mechanical Properties

Master Curve Fracture Toughness Characterization of Eurofer97 Steel Variants Using Miniature Multi-Notch Bend Bar Specimens for Fusion Applications

Xiang Chen, Mikhail A. Sokolov, Arunodaya Bhattacharya, Logan N. Clowers, Tim Graening, Yutai Katoh, Michael Rieth

PVP 2019; V001T01A036doi:https://doi.org/10.1115/PVP2019-93797

Abstract

View Article

PDF

Topics: Fracture toughness , Steel , Testing , Weibull distribution

PTS Evaluation Case Study Considering Actual Through-Wall Fracture Toughness Distribution

Masato Yamamoto, Masaki Nagai

PVP 2019; V001T01A037doi:https://doi.org/10.1115/PVP2019-93964

Abstract

View Article

PDF

Topics: Fracture toughness , Base metals , Fracture (Materials) , Belts , Fluence (Radiation measurement) , Fracture mechanics , Neutrons , Nuclear research , Probability , Surveillance

A Framework for Estimating Burst Test Fracture Toughness for Zr-2.5Nb Pressure Tubes Using Data From Small Specimen Tests

Steven X. Xu, Kim Wallin, David Cho

PVP 2019; V001T01A038doi:https://doi.org/10.1115/PVP2019-94064

Abstract

View Article

PDF

Topics: Fracture toughness , Pressure , Zirconium

High Temperature Codes and Standards

The Influence of Multiaxial Stress Relaxation on Component Creep Damage Accumulation

Nayden Matev, Robert A. Ainsworth, Meini Su, Mark Stevens, Alan Jappy

PVP 2019; V001T01A039doi:https://doi.org/10.1115/PVP2019-93096

Abstract

View Article

PDF

Topics: Creep , Damage , Relaxation (Physics) , Stress , Aeroelasticity , Cycles , Displacement , Ductility , Geometry , High temperature

A Unified Engineering Inelastic Model for 316H Stainless Steel

V.-T. Phan, M. C. Messner, T.-L. Sham

PVP 2019; V001T01A040doi:https://doi.org/10.1115/PVP2019-93641

Abstract

View Article

PDF

Topics: Boilers , Constitutive equations , Creep , Deformation , Design , Design methodology , High temperature , High temperature materials , Inelastic analysis , Plasticity

Development of the External Pressure Charts for 2¼Cr-1Mo and Mod.9Cr-1Mo Steel at Elevated Temperature Design

Masanori Ando, Satoshi Okajima, Kazumichi Imo

PVP 2019; V001T01A041doi:https://doi.org/10.1115/PVP2019-93777

Abstract

View Article

PDF

Topics: Buckling , Design , External pressure , Steel , Temperature

Hydrogen Effects on Material Behavior for Structural Integrity Assessment

Assessment of Leak Before Break of a Newly Developed Type II Pressure Vessel With High-Pressure Hydrogen Gas

Hiroshi Okano, Akihide Nagao, Kazuki Matsubara, Nobuyuki Ishikawa, Shusaku Takagi, Satoshi Kitagawa, Toshio Takano

PVP 2019; V001T01A042doi:https://doi.org/10.1115/PVP2019-93447

Abstract

View Article

PDF

Topics: High pressure (Physics) , Hydrogen , Leak-before-break , Pressure vessels , Vessels

Managing the Risks Associated With Operating a Hydrotreater Reactor With Possible High-Temperature Hydrogen Attack Damage

Phillip E. Prueter, Ryan Jones, Jacki Hess, Joel DeLuca

PVP 2019; V001T01A043doi:https://doi.org/10.1115/PVP2019-93533

Abstract

View Article

PDF

Topics: Damage , Fracture (Materials) , High temperature , Hydrogen , Methane , Nondestructive evaluation , Cavities , Failure , Pressure equipment , Brittle fracture

Technical Basis for Master Curve for Fatigue Crack Growth of Ferritic Steels in High-Pressure Gaseous Hydrogen in ASME Section VIII-3 Code

Chris San Marchi, Joseph Ronevich, Paolo Bortot, Yoru Wada, John Felbaum, Mahendra Rana

PVP 2019; V001T01A044doi:https://doi.org/10.1115/PVP2019-93907

Abstract

View Article

PDF

Topics: Fatigue cracks , High pressure (Physics) , Hydrogen , Steel , Pressure , Pressure vessels , Design , Tensile strength , ASME Boiler and Pressure Vessel Code , Fracture (Materials)

Evaluation of the Crack Interaction and Failure Behavior of Components With Crack Fields Using a Damage Mechanical Approach

Christian Swacek, Patrick Gauder, Michael Seidenfuss

PVP 2019; V001T01A045doi:https://doi.org/10.1115/PVP2019-93911

Abstract

View Article

PDF

Topics: Damage , Failure , Fracture (Materials) , Hydrogen , Pressure , Engineering standards , Nondestructive evaluation , Nuclear power stations , Pressure vessels , Probability

Improvement of Flaw Characterization Rules for FFS

Plastic Collapse Stresses for Thick Wall Pipes With External Cracks

Kunio Hasegawa, Yinsheng Li, Valery Lacroix, Vratislav Mares

PVP 2019; V001T01A046doi:https://doi.org/10.1115/PVP2019-93482

Abstract

View Article

PDF

Topics: Collapse , Fracture (Materials) , Pipes , Stress , ASME Standards , Bending (Stress) , Surface cracks , Wall thickness

A Comparison of Proximity Rules for Surface Planar Flaws

Afaf Bouydo, Pierre Dulieu, Valéry Lacroix, Kunio Hasegawa, Vratislav Mares

PVP 2019; V001T01A047doi:https://doi.org/10.1115/PVP2019-93513

Abstract

View Article

PDF

Topics: Fitness-for-service , Pipes , Pressure vessels

Comparison of Allowable Bending Moments for Circumferentially Flawed Pipes in ASME Boiler and Pressure Vessel Code Section XI Nonmandatory Appendices C and H

Hune-Tae Kim, Ji-Su Kim, Jun-Min Seo, Yun-Jae Kim, Kuk-Hee Lee, Nam-Su Huh

PVP 2019; V001T01A048doi:https://doi.org/10.1115/PVP2019-93553

Abstract

View Article

PDF

Topics: ASME Boiler and Pressure Vessel Code , Pipes

Generic Proximity Rules for Multiple Radially Oriented Planar Flaws: Technical Basis of Code Case N-877 Revision 1

Pierre Dulieu, Valéry Lacroix, Kunio Hasegawa

PVP 2019; V001T01A049doi:https://doi.org/10.1115/PVP2019-93578

Abstract

View Article

PDF

Topics: Fitness-for-service , Pressure

Integrity of Cast Stainless Steel Pipe

Recent Improvements in Toughness Prediction of Cast Duplex Stainless Steel Components

Patrick Le Delliou, Sébastien Saillet

PVP 2019; V001T01A050doi:https://doi.org/10.1115/PVP2019-93114

Abstract

View Article

PDF

Topics: Fracture toughness , Stainless steel , Notch testing , Steel , Temperature , Casting , Cavities , Crack propagation , Embrittlement , Ferrites (Magnetic materials)

Flaw Evaluation Procedure for Cast Austenitic Stainless Steel Materials Using a Newly Developed Statistical Thermal Aging Model

M. Uddin, C. Sallaberry, G. Wilkowski

PVP 2019; V001T01A051doi:https://doi.org/10.1115/PVP2019-93711

Abstract

View Article

PDF

Topics: Stainless steel , Fracture toughness , Pipes , Stress , Pressurized water reactors , Casting , Ferrites (Magnetic materials) , Databases , Dimensions , Embrittlement

Introduction of CASS Pipe Flaw Evaluation of JSME Rules on Fitness for Service

Kiminobu Hojo

PVP 2019; V001T01A052doi:https://doi.org/10.1115/PVP2019-93933

Abstract

View Article

PDF

Topics: Fitness-for-service , Japan Society of Mechanical Engineers , Pipes , Fracture (Materials) , Fracture (Process) , Stainless steel , Stress , Databases , Evaluation methods , Flat plates

Master Curve Methods and Applications

Impact of Using ASME Section XI Code Case N-830 on Plant Heatup and Cooldown Pressure-Temperature Limit Curves for Pressurized Water Reactors

Alexandria Carolan, Benjamin Mays, Anees Udyawar, J. Brian Hall

PVP 2019; V001T01A053doi:https://doi.org/10.1115/PVP2019-93081

Abstract

View Article

PDF

Topics: Pressure , Pressurized water reactors , Temperature

The Non-Effect of Yield Strength on RT_T0 and on the Master Curve

Mark Kirk, Marjorie Erickson

PVP 2019; V001T01A054doi:https://doi.org/10.1115/PVP2019-93367

Abstract

View Article

PDF

Topics: Fracture (Materials) , Fracture (Process) , Fracture toughness , Temperature , Yield strength

A Combined Model Approach for Estimating T₀

Marjorie Erickson

PVP 2019; V001T01A055doi:https://doi.org/10.1115/PVP2019-93646

Abstract

View Article

PDF

Topics: Accuracy and precision , ASME Standards , ASTM International , Density , Ductility , Fracture (Materials) , Fracture (Process) , Fracture toughness , Indexing (Machining) , Plane strain

Addressing NRC Concerns Regarding Proposed CC N-830: Direct Use of Fracture Toughness for Flaw Evaluations of Pressure Boundary Materials in Class 1 Ferritic Steel Components

Marjorie Erickson, Mark Kirk

PVP 2019; V001T01A056doi:https://doi.org/10.1115/PVP2019-93653

Abstract

View Article

PDF

Topics: Fracture toughness , Pressure , Steel , Electromagnetic scattering , Temperature effects , ASME Boiler and Pressure Vessel Code , Electricity (Physics) , Fracture (Materials) , Fracture mechanics , Hardening

Probabilistic and Risk-Informed Methods for Structural Integrity Assessment

Application of Probabilistic Fracture Mechanics Methodology for Japanese Reactor Pressure Vessels Using PASCAL4

Kai Lu, Jinya Katsuyama, Yinsheng Li, Shinobu Yoshimura

PVP 2019; V001T01A057doi:https://doi.org/10.1115/PVP2019-93935

Abstract

View Article

PDF

Topics: Fracture mechanics , Reactor vessels , Failure , Neutrons , Embrittlement , Fluence (Radiation measurement) , Irradiation (Radiation exposure) , Light water reactors , Nondestructive evaluation , Nuclear power

Inspection Optimization Justification for PWR Main Steam and Feedwater Nozzles Using Probabilistic Fracture Mechanics

C. Lohse, D. J. Shim, D. Somasundaram, R. Grizzi, G. L. Stevens, T. Cinson

PVP 2019; V001T01A058doi:https://doi.org/10.1115/PVP2019-93948

Abstract

View Article

PDF

Topics: Feedwater , Fracture mechanics , Inspection , Nozzles , Optimization , Pressurized water reactors , Steam , ASME Standards , Welded joints , Boilers

Effect of Coolant Water Temperature of ECCS on Failure Probability of RPV

Jinya Katsuyama, Koichi Masaki, Kai Lu, Tadashi Watanabe, Yinsheng Li

PVP 2019; V001T01A059doi:https://doi.org/10.1115/PVP2019-93967

Abstract

View Article

PDF

Topics: Coolants , Emergency core cooling systems , Failure , Fracture mechanics , Probability , Thermal shock , Water temperature , Temperature , Pressure , Pressurized water reactors

Recent Developments in ASME Codes and Standards

Technical Basis and Strategy for Consolidation of ASME Boiler and Pressure Vessel Code, Section III, Subsection NC (Class 2) and Subsection ND (Class 3) Into a Single Subsection

Jie Wen, Robert Keating, Timothy M. Adams

PVP 2019; V001T01A060doi:https://doi.org/10.1115/PVP2019-93115

Abstract

View Article

PDF

Topics: ASME Boiler and Pressure Vessel Code , Construction , Cycles , Design , Maintenance

Technical Basis of a Code Case to Provide a Strain-Based Acceptance Limits for Service Level D Evaluation of Piping Systems Under Section III of ASME Boiler and Pressure Vessel Code

Jie Wen, Timothy M. Adams

PVP 2019; V001T01A061doi:https://doi.org/10.1115/PVP2019-93119

Abstract

View Article

PDF

Topics: ASME Boiler and Pressure Vessel Code , Piping systems , Acceptance criteria , Stress , Pipes , Cycles , Earthquakes

Isochronous Stress-Strain Curves for Alloy 617

M. C. Messner, T.-L. Sham

PVP 2019; V001T01A062doi:https://doi.org/10.1115/PVP2019-93642

Abstract

View Article

PDF

Topics: Alloys , Stress-strain curves , High temperature , Deformation , Design , Design methodology , Boilers , Creep , Nickel , Pressure vessels

Design Methodologies for High Temperature Reactor Structural Components Cladded With Noncompliant Materials

B. Barua, V.-T. Phan, M. C. Messner, B. Jetter, T.-L. Sham, Y. Wang

PVP 2019; V001T01A063doi:https://doi.org/10.1115/PVP2019-93643

Abstract

View Article

PDF

Topics: Design , High temperature , Structural elements (Construction) , Corrosion resistant materials , Creep , Corrosion resistance , Deformation , Fatigue , Finite element analysis , Heat exchangers

A Method for Directly Assessing Elastic Follow Up in 3D Finite Element Calculations

M. C. Messner, B. Jetter, T.-L. Sham

PVP 2019; V001T01A064doi:https://doi.org/10.1115/PVP2019-93644

Abstract

View Article

PDF

Topics: Finite element analysis , High temperature , Creep , Design methodology , Structural elements (Construction) , Constitutive equations , Design , Fatigue , Simulation , Temperature

Development of Simplified Model Test Methods for Creep-Fatigue Evaluation

Y. Wang, B. Jetter, M. C. Messner, T.-L. Sham

PVP 2019; V001T01A065doi:https://doi.org/10.1115/PVP2019-93648

Abstract

View Article

PDF

Topics: Creep , Fatigue

Effect of Internal Pressurization on the Creep-Fatigue Performance of Alloy 617 Based on Simplified Model Test Method

Y. Wang, B. Jetter, T.-L. Sham

PVP 2019; V001T01A066doi:https://doi.org/10.1115/PVP2019-93650

Abstract

View Article

PDF

Topics: Alloys , Creep , Fatigue

Recent Developments in Chinese Codes and Standards

Comparison of Ellipsoidal and Equivalent Torispherical Heads Under Internal Pressure: Buckling, Plastic Collapse and Design Rules

Jinyang Zheng, Keming Li, Yehong Yu, Zekun Zhang, Wenzhu Peng, Chaohua Gu, Ping Xu

PVP 2019; V001T01A067doi:https://doi.org/10.1115/PVP2019-93039

Abstract

View Article

PDF

Topics: Buckling , Collapse , Design , Pressure

Analysis of the Gasket Damage and Sealing Performance for the Thread Ring Block Heat Exchanger

Fakun Zhuang, Wen Sui, Guoshan Xie, Shanshan Shao, Zhiyuan Han, Wen Liu

PVP 2019; V001T01A068doi:https://doi.org/10.1115/PVP2019-93055

Abstract

View Article

PDF

Topics: Damage , Gaskets , Heat exchangers , Sealing (Process) , Thread

Comparison and Analysis of Effective Guided Wave Standards Between GB and ASTM

Ju Ding, Min Zhang, Shu-hong Liu, Chen-huai Tang, Xu-chen Zhu, Deng-chao Tang, Yu-qing Yang

PVP 2019; V001T01A069doi:https://doi.org/10.1115/PVP2019-93106

Abstract

View Article

PDF

Topics: ASTM International , Guided wave ultrasonic testing , Waves , Nondestructive evaluation , China , Engineering standards , Pipelines , Ultrasound , Pipes , Pressure vessels

Analysis of Detection Quality for Ultrasonic Guided Wave With L(0,2) and T(0,1) in the Pressure Pipe

Shu-Hong Liu, Ju Ding, Chen-huai Tang, Pan Song, Deng-chao Tang, Ye Zhang, Yu-qing Yang

PVP 2019; V001T01A070doi:https://doi.org/10.1115/PVP2019-93203

Abstract

View Article

PDF

Topics: Pressure pipes , Waves

Modification and Extension of Screening Criteria for Fatigue Analysis

Jun Shen, Mingwan Lu, Zhenyu Wang, Heng Peng, Yinghua Liu

PVP 2019; V001T01A071doi:https://doi.org/10.1115/PVP2019-93341

Abstract

View Article

PDF

Topics: Design , Fatigue , Fatigue analysis , Stress , Cycles , ASME Standards , Pressure

Thinking on Intelligent Design, Manufacture and Maintenance of Pressure Equipment in China

Xuedong Chen, Zhichao Fan, Tao Chen, Shuangqing Xu, Guofu Ou, Xiaoying Tang

PVP 2019; V001T01A072doi:https://doi.org/10.1115/PVP2019-93364

Abstract

View Article

PDF

Topics: China , Design , Maintenance , Manufacturing , Pressure equipment

Analysis on Engineering Calculations for Connected Double Tubesheets

Guodong Zhu, Caifu Qian, Binan Shou, Guoshan Xie, Zhiyuan Han

PVP 2019; V001T01A073doi:https://doi.org/10.1115/PVP2019-93414

Abstract

View Article

PDF

Topics: Computational methods , Deformation , Engineering design , Engineers , Finite element analysis , Preferences , Stress

Technical Progress in Chinese Standard of Ultra-High Pressure Vessels

Zhiwei Chen, Tao Li, Guoyi Yang, Jinyang Zheng, Guide Deng

PVP 2019; V001T01A074doi:https://doi.org/10.1115/PVP2019-93487

Abstract

View Article

PDF

Topics: Design methodology , Engineering standards , Nondestructive evaluation , Pressure vessels

Effect of Plastic Deformation on Hydrogen Embrittlement Sensitivity and Strength of 2.25Cr1Mo0.25V Steel by Synchronous Hydrogen Charging

Qing Li, Yuqi Hu, Guangxu Cheng, Zaoxiao Zhang, Xiaowu Liang

PVP 2019; V001T01A075doi:https://doi.org/10.1115/PVP2019-93510

Abstract

View Article

PDF

Topics: Deformation , Hydrogen , Hydrogen embrittlement , Steel , Fracture (Materials) , Fracture (Process) , Mechanical properties , Cooling , Downtime , High pressure (Physics)

Investigation of Hydrogen Diffusion Characteristics of the Heat Affected Zone of 2.25Cr-1Mo-0.25V Steel by an Electrochemical Permeation Method

Xin Song, Zelin Han, Bin Liu, Mu Qin, Yuancai Duo, Yan Song, Guangxu Cheng

PVP 2019; V001T01A076doi:https://doi.org/10.1115/PVP2019-93568

Abstract

View Article

PDF

Topics: Diffusion (Physics) , Heat , Hydrogen , Steel , Density , Grain boundaries , Annealing , Computer software , Heat treating (Metalworking) , Materials degradation

Research on Risk Assessment Method and System Development of Small Ammonia Refrigeration Units

Xiang Li, Weihua Wang, Weike Jing, Jin Shi, Fakun Zhuang

PVP 2019; V001T01A077doi:https://doi.org/10.1115/PVP2019-93592

Abstract

View Article

PDF

Topics: Failure , Refrigeration , Risk assessment

A Study on Degree of Conservatism of Two Safety Assessment Methods for Piping and Vessels With Defects

Meng He, Haitao Li, Zhiyuan Han, Guoshan Xie, Liang Sun, Weihua Wang

PVP 2019; V001T01A078doi:https://doi.org/10.1115/PVP2019-93789

Abstract

View Article

PDF

Topics: Fitness-for-service , Pipes , Safety , Vessels

An Introduction to China National Standard for On-Board High-Pressure Hydrogen Storage Cylinders

Gai Huang, Jinyang Zheng, Zhengli Hua, Binbin Liao

PVP 2019; V001T01A079doi:https://doi.org/10.1115/PVP2019-93917

Abstract

View Article

PDF

Topics: China , Cylinders , Engineering standards , High pressure (Physics) , Hydrogen storage

Recent Developments in European Codes and Standards

New French Nuclear Pressure Equipment Regulation in 2019 and Use of Codes

Philippe Malouines, Andrew Wasylyk, Pascal Duranton

PVP 2019; V001T01A080doi:https://doi.org/10.1115/PVP2019-93033

Abstract

View Article

PDF

Topics: Pressure equipment , Regulations , Safety , Design , Manufacturing , Pressure Equipment Directive , Public utilities , Risk , Risk analysis

Optimising the Safe Design of Pressurised Components

Alison N. O’Connor, Catrin M. Davies, Stephen J. Garwood, Isabel Hadley

PVP 2019; V001T01A081doi:https://doi.org/10.1115/PVP2019-93154

Abstract

View Article

PDF

Topics: Design , Strength (Materials) , Temperature , Engineering standards , High strength steel , Low temperature , Manufacturing , Modeling , Pressure vessels , Robustness

RCC-M Code: Recent Evolutions and Perspectives

Manuela Triay, Eric Meister, Benoît Lefever, Sylvain Puybouffat, Julien Quéré, Emmanuel Chantelat, David Muller, Julien Cadith, Stéphane Marie, Nicolas de Mathan

PVP 2019; V001T01A082doi:https://doi.org/10.1115/PVP2019-93343

Abstract

View Article

PDF

Topics: Construction , Design , In-service inspection , Manufacturing , Nondestructive evaluation , Pressure equipment , Safety , Strategic planning

ASME XI–RSE-M: General Comparison of Flaw Evaluation Rules

Claude Faidy

PVP 2019; V001T01A083doi:https://doi.org/10.1115/PVP2019-93435

Abstract

View Article

PDF

Topics: Boilers , Fracture (Materials) , Fracture (Process) , Fracture toughness , In-service inspection , Leak-before-break , Materials properties , Pressure vessels , Pressurized water reactors

UK Programme on Codes, Standards and Procedure Needs for SMR and Gen IV Reactors: Phase 1 Output

P. M. James, N. J. Underwood, J. K. Sharples

PVP 2019; V001T01A084doi:https://doi.org/10.1115/PVP2019-93861

Abstract

View Article

PDF

Topics: Carbon , Design , Emissions , Energy resources , Engineering standards , Governments , Heat , Nuclear research , Small modular reactors , Transportation systems

Outline of the Recent Consolidated Revision of EN13445-3, Clause 18 and Related Annexes: Detailed Assessment of Fatigue Life

Jürgen Rudolph, Guy Baylac, Ralf Trieglaff, Rüdiger Gawlick, Michael Krämer, Yves Simonet, Manuela Triay

PVP 2019; V001T01A085doi:https://doi.org/10.1115/PVP2019-93910

Abstract

View Article

PDF

Topics: Cycles , Fatigue life , Stress

Repair, Replacement, and Mitigation for Fitness-for-Service Rules

New Code Case Development for the Mitigation of PWSCC and CISCC in ASME Section III Components by Advanced Surface Stress Improvement Technology

Sungwoo Cho, Nicholas Mohr, Young Sik Pyun, Auezhan Amanov, John Broussard

PVP 2019; V001T01A086doi:https://doi.org/10.1115/PVP2019-93232

Abstract

View Article

PDF

Topics: Stress , Stress corrosion cracking , Construction , Maintenance , Residual stresses , Acceptance criteria , Containment systems , Electricity (Physics) , Manufacturing , Nuclear power stations

Hot Cell Pulsed Laser Welding of Neutron Irradiated Type 304 Stainless Steel With a Maximum Damage Dose of 28 DPA

Paula D. Freyer, Jonathan K. Tatman, Frank A. Garner, Greg J. Frederick, Benjamin J. Sutton

PVP 2019; V001T01A087doi:https://doi.org/10.1115/PVP2019-93316

Abstract

View Article

PDF

Topics: Damage , Laser welding , Neutrons , Stainless steel , Helium , Welding , Heat , Welded joints , Cracking (Materials) , Fracture (Process)

A Development of the Technical Basis for the New Code Case “Mitigation of PWSCC and CISCC in ASME Section III Components by the Advanced Surface Stress Improvement Technology”

S. W. Cho, W. G. Yi, N. Mohr, A. Amanov, C. Stover, J. Tatman, V. Vasudevan, Y. S. Kim, Y. S. Pyun, H. Naralasetty, K. T. Kim

PVP 2019; V001T01A088doi:https://doi.org/10.1115/PVP2019-93330

Abstract

View Article

PDF

Topics: Stress , Stress corrosion cracking , Corrosion , Shot peening , Testing , Water , Cavitation , Chemistry , Construction , Density

Technical Basis for Weld Overlay Repair to Address Thermal Fatigue Cracking in Class 1, 2, and 3 Nuclear Reactor Piping

Stephen Marlette, Steven L. McCracken, David Segletes

PVP 2019; V001T01A089doi:https://doi.org/10.1115/PVP2019-93360

Abstract

View Article

PDF

Topics: Fatigue cracks , Maintenance , Nuclear reactors , Overlays (Materials engineering) , Pipes , Fatigue , Stainless steel , Stress corrosion cracking , ASME Standards , Boiling water reactors

Evaluation of Laser Peening for Mitigation of Primary Water Stress Corrosion Cracking in Pressurized Water Reactors

Stephen Marlette, Stan Bovid

PVP 2019; V001T01A090doi:https://doi.org/10.1115/PVP2019-93361

Abstract

View Article

PDF

Topics: Laser hardening , Pressurized water reactors , Stress corrosion cracking , Water , Alloys , Stress , Reactor vessels , Shot peening , Compression , Fracture (Materials)

Review of Ferrite Number (FN) Requirements and Proposed Changes to Code Case N-504-4 and Nonmandatory Appendix Q

Steven L. McCracken, David Segletes

PVP 2019; V001T01A091doi:https://doi.org/10.1115/PVP2019-93637

Abstract

View Article

PDF

Topics: Ferrites (Magnetic materials) , Carbon , Stress corrosion cracking , Metals , Overlays (Materials engineering) , Stainless steel , ASME Standards , Maintenance , Nuclear industry

Full Structural Weld Overlay on a Super Emergency Feedwater Nozzle at the Dukovany Nuclear Power Plant

Steven L. McCracken, Marek Palán, Pavel Mlynář, Nicholas Mohr

PVP 2019; V001T01A092doi:https://doi.org/10.1115/PVP2019-93664

Abstract

View Article

PDF

Topics: Emergencies , Feedwater , Nozzles , Nuclear power stations , Overlays (Materials engineering) , Maintenance , Metals , ASME Standards , Boilers , Inspection

Auxiliary Beam Stress Improved Laser Welding for Repair of Irradiated Light Water Reactor Components

Jian Chen, Jonathan Tatman, Zhili Feng, Roger Miller, Wei Tang, Maxim Gussev, Keith Leonard, Benjamin Sutton, Greg Frederick

PVP 2019; V001T01A093doi:https://doi.org/10.1115/PVP2019-93667

Abstract

View Article

PDF

Topics: Laser welding , Light water reactors , Maintenance , Stress , Welding , Nuclear reactors , Compression , Computer simulation , Cooling , Cracking (Materials)

Friction Stir Welding and Preliminary Characterization of Irradiated 304 Stainless Steel

Wei Tang, Maxim Gussev, Zhili Feng, Brian Gibson, Roger Miller, Jian Chen, Scarlett Clark, Keith Leonard, Jon Tatman, Ben Sutton, Greg Frederick

PVP 2019; V001T01A094doi:https://doi.org/10.1115/PVP2019-93899

Abstract

View Article

PDF

Topics: Friction , Maintenance , Stainless steel , Welding

Welding Process Development for Spent Nuclear Fuel Canister Repair

Wei Tang, Stylianos Chatzidakis, Roger Miller, Jian Chen, Doug Kyle, John Scaglione, Caleb Schrad

PVP 2019; V001T01A095doi:https://doi.org/10.1115/PVP2019-93946

Abstract

View Article

PDF

Topics: Gas tungsten arc welding , Maintenance , Spent nuclear fuels , Welding

Investigation of Relationship Between Microhardness and Charpy Impact Energy for Temper Bead Welding Qualification: Part 1

Boeing Smith, Antonio J. Ramirez, Steven L. McCracken, Stephen Tate

PVP 2019; V001T01A096doi:https://doi.org/10.1115/PVP2019-93950

Abstract

View Article

PDF

Topics: Microhardness , Welding , Accidents , Brittle fracture , Cracking (Materials) , Electricity (Physics) , Fracture (Process) , Heat , Heat treating (Metalworking) , Low temperature