Volumes | Pressure Vessels and Piping Conference | American Society of Mechanical Engineers Digital Collection

Skip Nav Destination

Volume 5: High-Pressure Technology; ASME Nondestructive Evaluation, Diagnosis and Prognosis Division (NDPD); SPC Track for Senate

High-Pressure Technology

20th Anniversary of ASME BPVC Section VIII Div. 3

Overview of Revisions to the ASME Boiler and Pressure Vessel Code Section VIII Division 3 for the 2017 Edition and Near Future

Daniel Peters, Gregory Mital, Adam P. Maslowski

PVP 2017; V005T05A001https://doi.org/10.1115/PVP2017-65119

Abstract

View Articletitled, Overview of Revisions to the ASME Boiler and Pressure Vessel Code Section VIII Division 3 for the 2017 Edition and Near Future

PDF

Topics: ASME Boiler and Pressure Vessel Code , Construction , Stress , High-pressure vessels , Pressure vessels , Conformity assessment , Design , Vessels , Wire , Composite materials

Adoption of the Composite Reinforced Pressure Vessels (CRPV) Into the ASME BPV Code

Richard C. Biel, Gregory Cano

PVP 2017; V005T05A002https://doi.org/10.1115/PVP2017-66021

Abstract

View Articletitled, Adoption of the Composite Reinforced Pressure Vessels (CRPV) Into the ASME BPV Code

PDF

Topics: Composite materials , Pressure vessels , Fibers , Metals , Shells , ASME Boiler and Pressure Vessel Code , Construction , Cylinders , Design , Hoop stress

Development of Japanese High Pressure Vessel Standard HPIS C106 With ASME Section VIII Division 3

Susumu Terada

PVP 2017; V005T05A003https://doi.org/10.1115/PVP2017-66082

Abstract

View Articletitled, Development of Japanese High Pressure Vessel Standard HPIS C106 With ASME Section VIII Division 3

PDF

Topics: High-pressure vessels , Design , Construction , Crystal growth , Isostatic pressing , Pressure , Temperature

Design and Analysis of High-Pressure Equipment for Oil and Gas Exploration and Production

A Study on the Influence of Sea Water Convective Heat Transfer Coefficient in Design Verification of Subsea HPHT Equipment

Ali Sepehri, Stuart Harbert, Dave Holberry

PVP 2017; V005T05A004https://doi.org/10.1115/PVP2017-65594

Abstract

View Articletitled, A Study on the Influence of Sea Water Convective Heat Transfer Coefficient in Design Verification of Subsea HPHT Equipment

PDF

Topics: Convection , Design , Ocean engineering , Seawater , Fatigue , Finite element analysis , American Petroleum Institute , Boilers , Collapse , Deformation

Development of a Novel Test Method to Characterize Material Properties in Corrosive Environments for Subsea HPHT Design

Ramgopal Thodla, Colum Holtam, Rajil Saraswat

PVP 2017; V005T05A005https://doi.org/10.1115/PVP2017-65772

Abstract

View Articletitled, Development of a Novel Test Method to Characterize Material Properties in Corrosive Environments for Subsea HPHT Design

PDF

Topics: Design , Materials properties , Ocean engineering , Fracture (Materials) , Fracture mechanics , Cathodic protection , Fatigue , Fracture toughness , Seawater , Stress

Load Monitoring and Condition Assessment of High-Pressure-High-Temperature (HPHT) Subsea Facilities

Mohsen Shavandi, Fei Tang

PVP 2017; V005T05A006https://doi.org/10.1115/PVP2017-66243

Abstract

View Articletitled, Load Monitoring and Condition Assessment of High-Pressure-High-Temperature (HPHT) Subsea Facilities

PDF

Topics: Ocean engineering , Pressure , Stress , Temperature , Cycles , Design , Fatigue , Gulf of Mexico , Inspection , Analytical methods

Design, Analysis, and Life Prediction of High-Pressure Vessels and Equipment

An Experimental Setup for Determining the Failure Locus of ASME Tubular Pressure Vessel Steel Grades

M. A. Al Khaled, I. Barsoum

PVP 2017; V005T05A007https://doi.org/10.1115/PVP2017-65111

Abstract

View Articletitled, An Experimental Setup for Determining the Failure Locus of ASME Tubular Pressure Vessel Steel Grades

PDF

Topics: Failure , Pressure vessels , Steel , Stress , ASME Boiler and Pressure Vessel Code , Plane strain , Carbon , Ductility , Geometry , Tension

High Pressure Tubing Material Performance Review

Kraig D. Warren

PVP 2017; V005T05A008https://doi.org/10.1115/PVP2017-65223

Abstract

View Articletitled, High Pressure Tubing Material Performance Review

PDF

Topics: High pressure (Physics) , Performance evaluation , Tubing , Manufacturing , Chemistry , Machinery , Alloys , Autofrettage , Carbon , Engineering standards

Fracture Assessments of High Pressure Vessel Components Having Longitudinal Holes

Yu Xu, Kuao-John Young

PVP 2017; V005T05A009https://doi.org/10.1115/PVP2017-65258

Abstract

View Articletitled, Fracture Assessments of High Pressure Vessel Components Having Longitudinal Holes

PDF

Topics: Fracture (Materials) , High-pressure vessels , Fracture mechanics , Stress concentration , Pressure , Stress analysis (Engineering) , Design , Hoop stress , Stress , Vessels

Deep-Hole-Drilling of High Pressure Tubes: Process Stability and the Influence of Eccentricity on Autofrettage and Heat Transfer

Hermann Maderbacher, Manfred Pölzl

PVP 2017; V005T05A010https://doi.org/10.1115/PVP2017-65652

Abstract

View Articletitled, Deep-Hole-Drilling of High Pressure Tubes: Process Stability and the Influence of Eccentricity on Autofrettage and Heat Transfer

PDF

Topics: Autofrettage , Drilling , Heat transfer , High pressure (Physics) , Stability , Fatigue , Sensitivity analysis , Wall thickness , Exterior walls , Heat conduction

Disrupting the Metallics Domain in Pressure Vessel and Piping Manufacture-Advanced Manufacturing in the Oil and Gas Sector

John Gerard Rafferty, David Gill, Ravi Kapur

PVP 2017; V005T05A011https://doi.org/10.1115/PVP2017-65840

Abstract

View Articletitled, Disrupting the Metallics Domain in Pressure Vessel and Piping Manufacture-Advanced Manufacturing in the Oil and Gas Sector

PDF

Topics: Manufacturing , Pipes , Pressure vessels , Design , Ocean engineering , American Petroleum Institute , Manufacturing technology , Welding , Aerospace industry , Aviation

High Pressure Vessel Life Assessment Issues

Improvements in the Welding Technology for Heavy Wall Pressure Vessels 2 ¼ Cr 1Mo ¼ V Low Alloy Steels

Fausto Fusari, Paolo Marangoni, Michele Musti, Stefano Alberini

PVP 2017; V005T05A012https://doi.org/10.1115/PVP2017-65663

Abstract

View Articletitled, Improvements in the Welding Technology for Heavy Wall Pressure Vessels 2 ¼ Cr 1Mo ¼ V Low Alloy Steels

PDF

Topics: Alloy steel , Pressure vessels , Welding , Arc welding , Creep , High-pressure vessels , ASME Standards , Fracture toughness , Hydrogen , Mechanical properties

Fracture Mechanics Analysis of Clad Subsea Equipment in Sour HPHT Conditions

Colum Holtam, Rajil Saraswat, Ramgopal Thodla

PVP 2017; V005T05A013https://doi.org/10.1115/PVP2017-65770

Abstract

View Articletitled, Fracture Mechanics Analysis of Clad Subsea Equipment in Sour HPHT Conditions

PDF

Topics: Fracture mechanics , Ocean engineering , Finite element analysis , American Petroleum Institute , Design , Fatigue , Fracture (Materials) , Alloy steel , Alloys , Failure

Surface Stress Analysis of Internally Corroded Pipes Under External Pressure

Zhanfeng Chen, Xiaoli Shen, Hao Ye, Sunting Yan, Zhijiang Jin

PVP 2017; V005T05A014https://doi.org/10.1115/PVP2017-66163

Abstract

View Articletitled, Surface Stress Analysis of Internally Corroded Pipes Under External Pressure

PDF

Topics: External pressure , Pipes , Stress analysis (Engineering) , Stress , Corrosion , Failure , Finite element methods , Pipelines , Pressure , Hoop stress

Structures Under Extreme Loading

Gaseous Deflagration in Piping: Part 1 — Experimental Observations

Thomas C. Ligon, David J. Gross, John C. Minichiello

PVP 2017; V005T05A015https://doi.org/10.1115/PVP2017-65032

Abstract

View Articletitled, Gaseous Deflagration in Piping: Part 1 — Experimental Observations

PDF

Topics: Explosions , Pipes , Pressure , Design , Flames , Dynamic response , Geometry , Piping systems , Shock waves , Structural analysis

Gaseous Deflagration in Piping: Part 2 — Proposed Methods and Code Acceptance Criteria

John C. Minichiello, Thomas C. Ligon, David J. Gross

PVP 2017; V005T05A016https://doi.org/10.1115/PVP2017-65033

Abstract

View Articletitled, Gaseous Deflagration in Piping: Part 2 — Proposed Methods and Code Acceptance Criteria

PDF

Topics: Acceptance criteria , Explosions , Pipes , Hydrogen , Piping systems , Slug flows , Stress , Piping design , Pressure , Testing

Pressure Vessel and Piping Hazard Analysis Methods Comparison

Matthew Edel, Donald Ketchum, Oscar Rodriguez

PVP 2017; V005T05A017https://doi.org/10.1115/PVP2017-65145

Abstract

View Articletitled, Pressure Vessel and Piping Hazard Analysis Methods Comparison

PDF

Topics: Hazard analysis , Pipes , Pressure vessels , Blast effect , Projectiles , Hazards , Analytical methods , Computational fluid dynamics , Explosives , Fluids

Selection of Bolt Preload for Impulsively Loaded Vessels

Thomas A. Duffey, Joseph E. D. Hess

PVP 2017; V005T05A018https://doi.org/10.1115/PVP2017-65173

Abstract

View Articletitled, Selection of Bolt Preload for Impulsively Loaded Vessels

PDF

Topics: Vessels , Pressure , Stress , Bolted joints , Containment vessels , Finite element analysis , ASME Standards , Fatigue , Finite element model , Leakage

Influence of Defect Distribution on Dynamic Elastic Buckling of Rings Under Internal Uniformly-Distributed Pressure Pulse

Qi Dong, Sha Yang, Liucheng Zhang

PVP 2017; V005T05A019https://doi.org/10.1115/PVP2017-65231

Abstract

View Articletitled, Influence of Defect Distribution on Dynamic Elastic Buckling of Rings Under Internal Uniformly-Distributed Pressure Pulse

PDF

Topics: Buckling , Pressure , Containment vessels , Explosions , Finite element model , Plane strain , Shapes , Shells

Computation of Fluid Thrust Force From the Pressure Release Tank of Nuclear Power Plant Pressurizer

Fu-Rui Xiong, Nai-Bin Jiang

PVP 2017; V005T05A020https://doi.org/10.1115/PVP2017-65250

Abstract

View Articletitled, Computation of Fluid Thrust Force From the Pressure Release Tank of Nuclear Power Plant Pressurizer

PDF

Topics: Computation , Fluids , Nuclear power stations , Pressure , Thrust , Computational fluid dynamics , Flow (Dynamics) , Accidents , Design , High pressure (Physics)

EDS Containment Vessel TNT Equivalence Testing

Robert W. Crocker, Brent L. Haroldsen, Jerome H. Stofleth

PVP 2017; V005T05A021https://doi.org/10.1115/PVP2017-65391

Abstract

View Articletitled, EDS Containment Vessel TNT Equivalence Testing

PDF

Topics: Containment vessels , Testing , Vessels , Explosives , ASME Boiler and Pressure Vessel Code , Design , Explosions

Numerical Study of an Impusively Loaded Vessel Containing Double Versus Single Closure Bolt Patterns

Joseph E. D. Hess

PVP 2017; V005T05A022https://doi.org/10.1115/PVP2017-65976

Abstract

View Articletitled, Numerical Study of an Impusively Loaded Vessel Containing Double Versus Single Closure Bolt Patterns

PDF

Topics: Vessels , Bolted joints , Design , Shells , Stress , ASME Standards , Deflection , Engineering design processes , Finite element analysis , Finite element model

ASME Nondestructive Evaluation, Diagnosis and Prognosis Division (NDPD)

Emerging NDE and Prognostic Techniques and Applications

Application of Computed Tomography for the Examination of Pressure Retaining Nuclear Plant Components

Robert Gratton, James Wilson, Kevin Skuse

PVP 2017; V005T10A001https://doi.org/10.1115/PVP2017-65051

Abstract

View Articletitled, Application of Computed Tomography for the Examination of Pressure Retaining Nuclear Plant Components

PDF

Topics: Computerized tomography , Nuclear power stations , Pressure , ASME Boiler and Pressure Vessel Code , Inspection , Nondestructive evaluation , Computers , Design , Engineers , Manufacturing

Leak Detection in Pressure Vessels Using Ultrasonic Techniques

Guilherme Ranzolin Piazzetta, Rodolfo César Costa Flesch, Antonio Luiz Schalata Pacheco

PVP 2017; V005T10A002https://doi.org/10.1115/PVP2017-65178

Abstract

View Articletitled, Leak Detection in Pressure Vessels Using Ultrasonic Techniques

PDF

Topics: Leakage , Pressure vessels , Acoustics , Signals , Testing , Vessels , Fluids , Manufacturing , Nondestructive evaluation , Sensors

Multisensor Degradation Data Fusion and Remaining Life Prediction

Changxi Wang, E. A. Elsayed, Kang Li, Javier Cabrera

PVP 2017; V005T10A003https://doi.org/10.1115/PVP2017-65306

Abstract

View Articletitled, Multisensor Degradation Data Fusion and Remaining Life Prediction

PDF

Topics: Data fusion , Sensors , Algorithms , Fatigue , Fracture (Materials) , Modeling

Assessing Advanced Test Reactor Process States Using Acoustic Measurement Infrastructure

Vivek Agarwal, James A. Smith

PVP 2017; V005T10A004https://doi.org/10.1115/PVP2017-65474

Abstract

View Articletitled, Assessing Advanced Test Reactor Process States Using Acoustic Measurement Infrastructure

PDF

Topics: Acoustics , Coolants , Signals , Cycles , Pumps , Sensors , Algorithms , Data acquisition , Design , Nuclear reactors

Deformation Analysis of Dented Pipeline via Surface Interpolation

Chike Okoloekwe, Muntaseer Kainat, Doug Langer, Sherif Hassanien, J. J. Roger Cheng, Samer Adeeb

PVP 2017; V005T10A005https://doi.org/10.1115/PVP2017-65523

Abstract

View Articletitled, Deformation Analysis of Dented Pipeline via Surface Interpolation

PDF

Topics: Deformation , Interpolation , Pipelines , Finite element analysis , Pipes , B-splines , Computer simulation , Displacement , Shells , Splines

Application of Computed Radiography in Pressure Vessel Welds: ASME Sec V Requirements and Recommendations of ASTM E2007

Santanu Saha

PVP 2017; V005T10A006https://doi.org/10.1115/PVP2017-65964

Abstract

View Articletitled, Application of Computed Radiography in Pressure Vessel Welds: ASME Sec V Requirements and Recommendations of ASTM E2007

PDF

Topics: ASTM International , Pressure vessels , Welded joints , Phosphors , Computers , Luminescence , Storage , ASME Standards , Brightness (Photometry) , Density

Initial Thermal Testing of the Pipe Over-Pack Container With a Combustible Waste Matrix for Los Alamos National Laboratory

Jude M. Oka, Tim A. Stone, Paul H. Smith, Jacob D. Riglin, Mike L. Caviness, Peter H. Carson, Mark P. Croce

PVP 2017; V005T10A007https://doi.org/10.1115/PVP2017-66191

Abstract

View Articletitled, Initial Thermal Testing of the Pipe Over-Pack Container With a Combustible Waste Matrix for Los Alamos National Laboratory

PDF

Topics: Containers , Pipes , Testing , Heat , Electrical measurement , Transportation systems , Temperature , Carbon steel , Computer simulation , Errors

A Novel Defect Location Method for Plate-Like Structure by Using Forward-Scattering Wave and Fuzzy C-Means Clustering

Shaojie Chen, Shaoping Zhou, Yong Li, Lanzhu Zhang

PVP 2017; V005T10A008https://doi.org/10.1115/PVP2017-66236

Abstract

View Articletitled, A Novel Defect Location Method for Plate-Like Structure by Using Forward-Scattering Wave and Fuzzy C-Means Clustering

PDF

Topics: Electromagnetic scattering , Radiation scattering , Scattering (Physics) , Waves , Algorithms , Flaw detection , Imaging , Sensors , Signals , Transducers

NDE Techniques and Applications for Petrochemical and Power Plant Components

Image Analysis of Indications in Fillet Welding by Phased Array Ultrasonic Technique

Youwei Zhang, Yuqing Yang, Qingfeng Li, Le Chen

PVP 2017; V005T10A009https://doi.org/10.1115/PVP2017-65191

Abstract

View Articletitled, Image Analysis of Indications in Fillet Welding by Phased Array Ultrasonic Technique

PDF

Topics: Welding , Testing , Ultrasonic testing , Nondestructive evaluation , Shapes , Steel , Boilers , Butt welding , Computer software , Corners (Structural elements)

Improving Ultrasonic Examination Procedures for Detection of Thermal Fatigue

Jack Spanner

PVP 2017; V005T10A010https://doi.org/10.1115/PVP2017-65855

Abstract

View Articletitled, Improving Ultrasonic Examination Procedures for Detection of Thermal Fatigue

PDF

Topics: Fatigue , Ultrasonic testing , Inspection , Nuclear power stations , Computers , Electricity (Physics) , Fatigue cracks , Leakage , Public utilities , Reliability

Application of Ultrasonic Phased Array Technique for a Boiler Drum Meeting the Requirements of ASME Sec I

Santanu Saha

PVP 2017; V005T10A011https://doi.org/10.1115/PVP2017-65963

Abstract

View Articletitled, Application of Ultrasonic Phased Array Technique for a Boiler Drum Meeting the Requirements of ASME Sec I

PDF

Topics: Boilers , Vessels , Pressure vessels , Radiation sources , Ultrasonic testing , Welded joints , Diffraction , Energy resources , Flight , Generators

Ultrasonic Inspection Technique for Inside Pressurized Pipe Elbows

Cunjian Miao, Weican Guo, Xingji Du, Zhangwei Ling

PVP 2017; V005T10A012https://doi.org/10.1115/PVP2017-66124

Abstract

View Articletitled, Ultrasonic Inspection Technique for Inside Pressurized Pipe Elbows

PDF

Topics: Inspection , Pipes , Probes , Design , Echoes , Pipelines , Simulation , Ultrasound , Corrosion , Manufacturing

Ultrasonic Inspection of Dissimilar Metal Welds for Probabilistic Reliability Assessment of Pipe Welds

Sandra Dugan, Anne Jüngert

PVP 2017; V005T10A013https://doi.org/10.1115/PVP2017-66210

Abstract

View Articletitled, Ultrasonic Inspection of Dissimilar Metal Welds for Probabilistic Reliability Assessment of Pipe Welds

PDF

Topics: Inspection , Metals , Pipes , Reliability , Welded joints , Materials properties , Safety , Uncertainty , Anisotropy , Electromagnetic scattering

SPC Track for Senate

Student Paper Competition

Ductile Damage Assessment Using Continuum Damage Mechanics and Methodology for High Strain-Rate Damage Analysis

Alexander Sancho, Paul A. Hooper, Catrin M. Davies

PVP 2017; V005T11A001https://doi.org/10.1115/PVP2017-65097

Abstract

View Articletitled, Ductile Damage Assessment Using Continuum Damage Mechanics and Methodology for High Strain-Rate Damage Analysis

PDF

Topics: Damage , Damage assessment , Damage mechanics , Calibration , Deformation , Cycles , Design , Elastic moduli , Gages , Geometry

Vibration Suppression Performance of a Desktop Vibration Isolator Supported by Four Air Spring

Yuichi Baba, Kento Onishi, Toshihiko Asami

PVP 2017; V005T11A002https://doi.org/10.1115/PVP2017-65109

Abstract

View Articletitled, Vibration Suppression Performance of a Desktop Vibration Isolator Supported by Four Air Spring

PDF

Topics: Springs , Vibration isolators , Vibration suppression , Reservoirs , Pipes , Damping , Measuring instruments , Resonance , Vibration isolation

Multiaxial Fatigue in Drill Pipes Under Non-Proportional Loading

Nahla A. Helmy, Maher Y. A. Younan

PVP 2017; V005T11A003https://doi.org/10.1115/PVP2017-65175

Abstract

View Articletitled, Multiaxial Fatigue in Drill Pipes Under Non-Proportional Loading

PDF

Topics: Drills (Tools) , Fatigue , Pipes , Fatigue life , Computer software , Drilling , Fracture (Materials) , High cycle fatigue , Torque , American Petroleum Institute

Development of a Profile Matching Criteria to Model Dents in Pipelines Using Finite Element Analysis

Janine Woo, Muntaseer Kainat, Samer Adeeb

PVP 2017; V005T11A004https://doi.org/10.1115/PVP2017-65278

Abstract

View Articletitled, Development of a Profile Matching Criteria to Model Dents in Pipelines Using Finite Element Analysis

PDF

Topics: Finite element analysis , Pipelines , Shapes , Stress , Computer software , Engineering standards , Errors , Inspection , Pipeline integrity , Pipeline risers

Visualization of Thermal Fatigue Damage Distribution With Simplified Stress Range Calculations

Junya Miura, Terutaka Fujioka, Yasuhiro Shindo

PVP 2017; V005T11A005https://doi.org/10.1115/PVP2017-65322

Abstract

View Articletitled, Visualization of Thermal Fatigue Damage Distribution With Simplified Stress Range Calculations

PDF

Topics: Fatigue damage , Stress , Visualization , Cylinders , Transients (Dynamics) , Computation , Fatigue , Finite element analysis , Fracture (Materials) , Simulation results

Shakedown Limits for Hillside Nozzles in Cylindrical Vessels

Ahmed K. Bakry, Chahinaz A. Saleh, Mohammad M. Megahed

PVP 2017; V005T11A006https://doi.org/10.1115/PVP2017-65337

Abstract

View Articletitled, Shakedown Limits for Hillside Nozzles in Cylindrical Vessels

PDF

Topics: Nozzles , Vessels , Pressure , Finite element analysis , High pressure (Physics) , Manufacturing , Mechanical behavior , Shells , Stress

Influence of Nonhomogeneous Microstructure of Multi-Pass Weld Metal on Creep Behavior of Cross-Weld Specimen Based on Finite Element Method

Bin Yang, Fu-Zhen Xuan

PVP 2017; V005T11A007https://doi.org/10.1115/PVP2017-65339

Abstract

View Articletitled, Influence of Nonhomogeneous Microstructure of Multi-Pass Weld Metal on Creep Behavior of Cross-Weld Specimen Based on Finite Element Method

PDF

Topics: Creep , Finite element methods , Metals , Welding , Stress , Damage , Finite element model , Numerical analysis

Fracture Toughness Testing of a Low Alloy Structural Steel Using Non-Standard Bend Specimens and an Exploratory Application to Determine the Reference Temperature, T₀

Vitor Scarabeli Barbosa, Claudio Ruggieri

PVP 2017; V005T11A008https://doi.org/10.1115/PVP2017-65383

Abstract

View Articletitled, Fracture Toughness Testing of a Low Alloy Structural Steel Using Non-Standard Bend Specimens and an Exploratory Application to Determine the Reference Temperature, <em>T</em><sub>0</sub>

PDF

Topics: Alloys , Fracture toughness , Structural steel , Temperature , Testing , Fracture (Materials) , Fracture (Process) , Geometry , ASTM International , Displacement

3D Micro-Macro Fluid-Structure Model of Pressure Relief Valve Leak Tightness

Ali A. Anwar, William Dempster, Yevgen Gorash

PVP 2017; V005T11A009https://doi.org/10.1115/PVP2017-65403

Abstract

View Articletitled, 3D Micro-Macro Fluid-Structure Model of Pressure Relief Valve Leak Tightness

PDF

Topics: Fluids , Leakage , Relief valves , Metals , Computational fluid dynamics , Design , Finite element analysis , Deformation , Design methodology , Engineers

An Analytical Approach for Strain Analysis of Buried Steel Pipeline in Mining Subsidence Areas

Mengying Xia, Hong Zhang

PVP 2017; V005T11A010https://doi.org/10.1115/PVP2017-65453

Abstract

View Articletitled, An Analytical Approach for Strain Analysis of Buried Steel Pipeline in Mining Subsidence Areas

PDF

Topics: Mining , Pipelines , Steel , Pipes , Buckling , Failure , Finite element analysis , Hazards , Pressure , Rupture

Embedded Capacitance Sensor Array for Structural Health Monitoring of Pipeline Systems

Jarod Weber, Jianfeng Shi, Chuck Zhang

PVP 2017; V005T11A011https://doi.org/10.1115/PVP2017-65473

Abstract

View Articletitled, Embedded Capacitance Sensor Array for Structural Health Monitoring of Pipeline Systems

PDF

Topics: Capacitance , Pipeline systems , Sensors , Structural health monitoring , Electrodes , Pipes , Composite materials , Damage , Fiber reinforced plastics , Fibers

Study on Ultimate Behavior of Base-Isolated Layer in Nuclear Facility for Cliff-Edges Effect

Kouhei Imamura, Osamu Furuya, Kengo Goda

PVP 2017; V005T11A012https://doi.org/10.1115/PVP2017-65561

Abstract

View Articletitled, Study on Ultimate Behavior of Base-Isolated Layer in Nuclear Facility for Cliff-Edges Effect

PDF

Topics: Deformation , Design , Finite element methods , Mechanical properties , Molding , Pressure , Rubber , Safety , Shear (Mechanics) , Urethane elastomers

Experimental Investigation on Adhesive Bonded Joints of Carbon Fiber Composite Laminates Containing Disbond Defect

Ping Qiu, Jianfeng Shi, Jinyang Zheng

PVP 2017; V005T11A013https://doi.org/10.1115/PVP2017-65580

Abstract

View Articletitled, Experimental Investigation on Adhesive Bonded Joints of Carbon Fiber Composite Laminates Containing Disbond Defect

PDF

Topics: Adhesives , Carbon fibers , Composite materials , Laminates , Adhesive joints , Carbon reinforced plastics , Failure , Failure mechanisms , Stress concentration , Aluminum foil

An Improved Continuum Damage Constitutive Model for Creep Deformation of Cast 20Cr32Ni1Nb Steel

Xiaofeng Guo, Jianming Gong, Luyang Geng

PVP 2017; V005T11A014https://doi.org/10.1115/PVP2017-65583

Abstract

View Articletitled, An Improved Continuum Damage Constitutive Model for Creep Deformation of Cast 20Cr32Ni1Nb Steel

PDF

Topics: Constitutive equations , Creep , Damage , Steel , Failure , Manifolds , Microcracks , Particulate matter , Physics , Stainless steel

Theoretical Analysis of Free Vibrations Based on a New High Order Shell Theory for Cylindrical Shells Conveying Fluid

Ming Ji, Kazuaki Inaba

PVP 2017; V005T11A015https://doi.org/10.1115/PVP2017-65604

Abstract

View Articletitled, Theoretical Analysis of Free Vibrations Based on a New High Order Shell Theory for Cylindrical Shells Conveying Fluid

PDF

Topics: Fluids , Free vibrations , Pipes , Shells , Theoretical analysis , Flow (Dynamics) , Boundary-value problems , Equations of motion , Finite element methods , Finite element model

Evaluation of Weld Homogenization Schemes Based on Plastic Loading of Single Edge Notched Tension (SE(T)) Tests

Sameera Naib, Wim De Waele, Stijn Hertelé

PVP 2017; V005T11A016https://doi.org/10.1115/PVP2017-65693

Abstract

View Articletitled, Evaluation of Weld Homogenization Schemes Based on Plastic Loading of Single Edge Notched Tension (SE(T)) Tests

PDF

Topics: Approximation , Base metals , Engineering simulation , Finite element analysis , Metals , Simulation , Stress , Tension , Welded joints

Study on the Rocking Vibration Induced in Three-Dimensional Seismic Isolation System

Noriaki Tomita, Satoshi Fujita

PVP 2017; V005T11A017https://doi.org/10.1115/PVP2017-65714

Abstract

View Articletitled, Study on the Rocking Vibration Induced in Three-Dimensional Seismic Isolation System

PDF

Topics: Vibration , Stiffness , Center of mass , Earthquakes , Design , Safety , Seismic waves

Assessment of Aircraft Crash to Containment and its Effects on Reactor Cavity and Major Components

Jae Min Sim, Yoon-Suk Chang

PVP 2017; V005T11A018https://doi.org/10.1115/PVP2017-65746

Abstract

View Articletitled, Assessment of Aircraft Crash to Containment and its Effects on Reactor Cavity and Major Components

PDF

Topics: Aircraft , Cavities , Containment , Stress , Damage , Nuclear power stations , Reinforced concrete , Cracking (Materials) , Earthquakes , Finite element analysis

Student Paper Symposium

Optimizing Maintenance Strategy of a Reactor Pressure Vessel Using 3D-CFD and FEM Based Probabilistic Pressurized Thermal Shock Analysis

Xiaoyong Ruan, Toshiki Nakasuji, Kazunori Morishita

PVP 2017; V005T11A019https://doi.org/10.1115/PVP2017-65072

Abstract

View Articletitled, Optimizing Maintenance Strategy of a Reactor Pressure Vessel Using 3D-CFD and FEM Based Probabilistic Pressurized Thermal Shock Analysis

PDF

Topics: Computational fluid dynamics , Finite element methods , Maintenance , Reactor vessels , Thermal shock , Fracture (Materials) , Coolants , Emergency core cooling systems , Probability , Safety

Practical Design of a High Frequency Phased-Array Acoustic Microscope Probe: A Preliminary Study

Jeong Nyeon Kim, Richard L. Tutwiler, Judith A. Todd

PVP 2017; V005T11A020https://doi.org/10.1115/PVP2017-65270

Abstract

View Articletitled, Practical Design of a High Frequency Phased-Array Acoustic Microscope Probe: A Preliminary Study

PDF

Topics: Acoustics , Design , Microscopes , Probes , Lenses (Optics) , Computer software , Displacement , Echoes , Finite element methods , Impulse (Physics)

A Novel Metamodeling Approach for Time-Temperature Parameter Models

Mohammad Shafinul Haque, Christopher Ramirez, Calvin M. Stewart

PVP 2017; V005T11A021https://doi.org/10.1115/PVP2017-65297

Abstract

View Articletitled, A Novel Metamodeling Approach for Time-Temperature Parameter Models

PDF

Topics: Temperature , Stress , Rupture , Uncertainty , Alloys , Databases , Press fits , Regression analysis , Statistical analysis

Prediction of the Temperature Dependence on Fracture Toughness by New Stress Distribution Scaling Method

Kenichi Ishihara, Takeshi Hamada, Toshiyuki Meshii

PVP 2017; V005T11A022https://doi.org/10.1115/PVP2017-65350

Abstract

View Articletitled, Prediction of the Temperature Dependence on Fracture Toughness by New Stress Distribution Scaling Method

PDF

Topics: Fracture toughness , Stress concentration , Temperature effects , Temperature , Stress , Fracture (Materials) , Brittleness , Carbon steel , Finite element analysis , Stress-strain relations

The Fatigue Threshold Computation of Steel in Hydrogen Environment by Shakedown Analysis

Song Huang, Zhiping Chen, Wenqiang Su

PVP 2017; V005T11A023https://doi.org/10.1115/PVP2017-65432

Abstract

View Articletitled, The Fatigue Threshold Computation of Steel in Hydrogen Environment by Shakedown Analysis

PDF

Topics: Computation , Fatigue , Hydrogen , Steel , Stress , Deformation , Density , Hydrogen content (Metals) , Theorems (Mathematics) , Yield stress

Simplified Analysis of the Rocking Motion of a Cylindrical Tank Focusing on the Role of Dynamical Forces Involved in Rocking-Bulging Interaction

Marta D’Amico, Tomoyo Taniguchi, Teruhiro Nakashima

PVP 2017; V005T11A024https://doi.org/10.1115/PVP2017-65442

Abstract

View Articletitled, Simplified Analysis of the Rocking Motion of a Cylindrical Tank Focusing on the Role of Dynamical Forces Involved in Rocking-Bulging Interaction

PDF

Topics: Centrifugal force , Computer software , Equations of motion , Finite element analysis , Fluids , Seismic analysis

Failure Mode Map of Pipes Under Dynamic Loadings

Md Abdullah Al Bari, Ryota Sakemi, Naoto Kasahara

PVP 2017; V005T11A025https://doi.org/10.1115/PVP2017-65635

Abstract

View Articletitled, Failure Mode Map of Pipes Under Dynamic Loadings

PDF

Topics: Failure mechanisms , Pipes , Stress , Collapse , Design , Fatigue , Finite element methods , Fukushima nuclear disaster, Japan, 2011 , Gravity (Force)

A Homogenisation Method for a FSI Problem: Application to a Tube Bundle Row

Gianluca Artini, Daniel Broc

PVP 2017; V005T11A026https://doi.org/10.1115/PVP2017-65737

Abstract

View Articletitled, A Homogenisation Method for a FSI Problem: Application to a Tube Bundle Row

PDF

Topics: Fluid structure interaction , Displacement , Dynamics (Mechanics) , Boilers , Breeder reactors , Computer simulation , Fluids , Modeling , Navier-Stokes equations , Nuclear reactors

All Years

Proceedings Papers

High-Pressure Technology

20th Anniversary of ASME BPVC Section VIII Div. 3

Design and Analysis of High-Pressure Equipment for Oil and Gas Exploration and Production

Design, Analysis, and Life Prediction of High-Pressure Vessels and Equipment

High Pressure Vessel Life Assessment Issues

Structures Under Extreme Loading

ASME Nondestructive Evaluation, Diagnosis and Prognosis Division (NDPD)

Emerging NDE and Prognostic Techniques and Applications

NDE Techniques and Applications for Petrochemical and Power Plant Components

SPC Track for Senate

Student Paper Competition

Student Paper Symposium

Email alerts

Most Read Proceedings Papers in PVP

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only