Volumes | Pressure Vessels and Piping Conference | American Society of Mechanical Engineers Digital Collection

Topics: Fatigue analysis , Thermal shock , Stress , Temperature , Boundary-value problems , Fatigue , Finite element analysis , Finite element model , Safety , Service life (Equipment)

Numerical Simulation of Cavitating Flow in a Globe Valve: Comparison of OpenFoam and CFX

Daniel Rodriguez Calvete, Anne Gosset, Daniel Pierrat, Anthony Couzinet

PVP 2016; V003T03A002doi:https://doi.org/10.1115/PVP2016-63599

Abstract

View Article

PDF

Topics: Computer simulation , Flow (Dynamics) , Valves , Cavitation , Cavities , Vapors , Computation , Computational fluid dynamics , Equilibrium (Physics) , Pressure drop

Numerical Analysis of Unsteady Phenomena in Upper Plenum and Hot-Leg Piping System of Advanced Loop-Type Sodium Cooled Fast Reactor

Shigeru Takaya, Tatsuya Fujisaki, Masaaki Tanaka

PVP 2016; V003T03A003doi:https://doi.org/10.1115/PVP2016-63845

Abstract

View Article

PDF

Topics: Numerical analysis , Piping systems , Sodium fast reactors , Flow (Dynamics) , Pipes , Design , Simulation results , Swirling flow , Computer simulation , Construction

Assessment of Analysis Methods for Dynamic Loading of Skirt Supported Vessels

Agron E. Gjinolli, Cary D. Bremigan, Jason E. Dorgan

PVP 2016; V003T03A004doi:https://doi.org/10.1115/PVP2016-63985

Abstract

View Article

PDF

Topics: Dynamic testing (Materials) , Vessels , Compression , Design , Energy generation , Exhaust systems , Acoustics , Piston engines , Air pollution control , Analytical methods

Design and Analysis of Bolted Joints

Propagating ASME PCC-1 Appendix A Compliance

Jason M. Barnard

PVP 2016; V003T03A005doi:https://doi.org/10.1115/PVP2016-63228

Abstract

View Article

PDF

Topics: Bolted flanges , Bolted joints , Construction industry , Energy generation , Leakage , Manufacturing , North Sea , Petrochemicals , Pressure , Safety

Case Histories of the Resolution of Bolted Joint Leakage in the Oil and Gas Industry

Warren Brown, Geoff Evans, Lorna Carpenter

PVP 2016; V003T03A006doi:https://doi.org/10.1115/PVP2016-63239

Abstract

View Article

PDF

Topics: Bolted joints , Leakage , Petroleum industry , Resolution (Optics) , Failure , Acoustical engineering , Manufacturing , Probability , Stress

Moly Disulfide in Bolting Applications

Donald Oldiges, Scott Hamilton

PVP 2016; V003T03A007doi:https://doi.org/10.1115/PVP2016-63361

Abstract

View Article

PDF

Topics: Alloys , Corrosion , Galling , Lubricants , Manufacturing , Molybdenum , Molybdenum compounds , Stress corrosion cracking

Quality Assurance Guide to B16.20 Spiral Wound Gaskets

Scott Hamilton, Benjamin Hantz, Kenneth Felder

PVP 2016; V003T03A008doi:https://doi.org/10.1115/PVP2016-63366

Abstract

View Article

PDF

Topics: Gaskets , Quality control

Development of Gaskets and its Accessories for Electrical Insulation of Pipelines

Roberto H. G. Araujo, Luiz P. Romano, José C. Veiga, Ana C. Silva

PVP 2016; V003T03A009doi:https://doi.org/10.1115/PVP2016-63573

Abstract

View Article

PDF

Topics: Gaskets , Insulation , Pipelines , Electrolytic corrosion , Epoxy adhesives , Epoxy resins , Failure , Flanges , Metals , Offshore installations

Undertaking Bolted Joint Integrity Management: Getting to Zero Leaks Quickly and Effectively

Alwyn Kaye

PVP 2016; V003T03A010doi:https://doi.org/10.1115/PVP2016-63873

Abstract

View Article

PDF

Topics: Bolted joints , Leakage , Pressure equipment , Reliability , Construction , Containment , Failure , Manufacturing , Performance , Petrochemicals

Design and Analysis of Piping and Components

Dissimilar Metal Welds: Impact of the Residual Stresses on the Risk of Failure

A. Blouin, S. Chapuliot, S. Marie

PVP 2016; V003T03A011doi:https://doi.org/10.1115/PVP2016-63050

Abstract

View Article

PDF

Topics: Failure , Metals , Residual stresses , Risk , Welded joints , Brittle fracture , Pipes , Stress , Brittleness , Fracture (Materials)

Flexibility Analysis of Piping Systems With Discontinuities in Displacement

Birendra N. Choudhury

PVP 2016; V003T03A012doi:https://doi.org/10.1115/PVP2016-63066

Abstract

View Article

PDF

Topics: Displacement , Piping systems , Pipes , Deformation , Stress analysis (Engineering) , Temperature , Thermal expansion

Development of Design Curve for Sweepolet Subjected to Acoustic Induced Vibration

Yuqing Liu, Philip Diwakar, Dan Lin, Ismat Eljaouhari, Ajay Prakash

PVP 2016; V003T03A013doi:https://doi.org/10.1115/PVP2016-63072

Abstract

View Article

PDF

Topics: Acoustics , Design , Vibration , Fatigue failure , Fatigue life , Fittings , Pipes , Stress , Stress concentration , Excitation

Failure of Thin-Walled Pipes With D/T up to 140 and Conclusions for the Design Codes

Henry Schau, Lilit Mkrtchyan, Michael Johannes

PVP 2016; V003T03A014doi:https://doi.org/10.1115/PVP2016-63098

Abstract

View Article

PDF

Topics: Design , Failure , Pipes , Bending (Stress) , Buckling , Yield stress , ASME Standards , Dynamic analysis , Finite element analysis , Materials properties

An Analytical Solution Based on Shell Theory for Calculating Stresses on Full Encirclement Sleeves Used on Pipes and Pressure Vessels

Chithranjan Nadarajah

PVP 2016; V003T03A015doi:https://doi.org/10.1115/PVP2016-63135

Abstract

View Article

PDF

Topics: Pipes , Pressure vessels , Shells , Stress , Maintenance , Finite element analysis , Petrochemicals

Effect of Bend Angle on Plastic Limit Loads of Pipe Bends Under In-Plane Bending Moment

Shunjie Li, Changyu Zhou, Jian Li, Xinting Miao

PVP 2016; V003T03A016doi:https://doi.org/10.1115/PVP2016-63180

Abstract

View Article

PDF

Topics: Pipe bends , Stress , Finite element analysis , Stress concentration

Numerical Analysis on Cavitation Erosion of a High Pressure Differential Control Valve

Zhijian Zheng, Guofu Ou, Haojie Ye, Haozhe Jin

PVP 2016; V003T03A017doi:https://doi.org/10.1115/PVP2016-63209

Abstract

View Article

PDF

Topics: Cavitation erosion , High pressure (Physics) , Numerical analysis , Valves , Cavitation , Fluids , Pressure , Computer simulation , Flow (Dynamics) , Failure

Study on Structure Lightweight of the Vehicle Mounted LNG Tank

Yichuan Wang, Xiang Ling

PVP 2016; V003T03A018doi:https://doi.org/10.1115/PVP2016-63320

Abstract

View Article

PDF

Topics: Liquefied natural gas , Vehicles , Sandwich structures , Cylinders , Design , Optimization , Steel , Stiffness , Transportation systems , Crashworthiness

Evaluation of Stress in Vibrating Cylindrical Shells due to Acoustic Loading Based on Theory of Shells

Shunji Kataoka, Takahiro Hida

PVP 2016; V003T03A019doi:https://doi.org/10.1115/PVP2016-63383

Abstract

View Article

PDF

Topics: Pipes , Shells , Sound pressure , Stress , Vibration , Acoustics , Design , Design methodology , Fatigue life , Finite element analysis

A Probabilistic Approach to Predicting Pipework Failures in High Temperature Environments

Benjamin Cannell, David Lloyd, Feras ElAgha, David Knowles

PVP 2016; V003T03A020doi:https://doi.org/10.1115/PVP2016-63518

Abstract

View Article

PDF

Topics: Failure , High temperature , Piping systems , Materials properties , Stress , Collapse , Creep , Reliability , Rupture , Stainless steel

On Piping Vibration and Practical Measures for Preventing Vibration-Related Damage

Lennart G. Jansson, Lingfu Zeng, Alexander Börjesson

PVP 2016; V003T03A021doi:https://doi.org/10.1115/PVP2016-63544

Abstract

View Article

PDF

Topics: Damage , Pipes , Vibration , Piping systems , Risk , Stress

Characteristics of Commercially Available Integrally Reinforced Weld-On Fittings

Charles Becht, V, Anthony Paulin, Mark Stonehouse, Donald Edwards, John Cates

PVP 2016; V003T03A022doi:https://doi.org/10.1115/PVP2016-63690

Abstract

View Article

PDF

Topics: Fittings , Design , Finite element analysis , Pipes , Stress , Testing , Geometry , Manufacturing , Piping systems

Proposed Updates to Appendix D SIF and K-Factors for Branch Connections

Charles Becht, V, Anthony Paulin, Mark Stonehouse

PVP 2016; V003T03A023doi:https://doi.org/10.1115/PVP2016-63691

Abstract

View Article

PDF

Topics: Design , Failure , Manufacturing , Piping systems , Quality control , Separation (Technology) , Stress , Testing

Three-Dimensional Analysis of Corrosion Surface on Outer Surface of Piping by Use of Fractal Concept

Kenta Yamagiwa

PVP 2016; V003T03A024doi:https://doi.org/10.1115/PVP2016-63717

Abstract

View Article

PDF

Topics: Corrosion , Fractals , Pipes , Geometry , Wavelets , Dimensions , Gaussian distribution , Measurement systems , Pressure , Steel

Elbow Flexibility Factor Calculations: An Update

Trevor G. Seipp, Gonzalo Mendoza

PVP 2016; V003T03A025doi:https://doi.org/10.1115/PVP2016-63758

Abstract

View Article

PDF

Topics: Finite element analysis , Pipes

Assessing the Behaviour of Subsea Pipes Under Impact

Shamsoon Fareed, Demitrios M. Cotsovos, Omar Laghrouche

PVP 2016; V003T03A026doi:https://doi.org/10.1115/PVP2016-63810

Abstract

View Article

PDF

Topics: Ocean engineering , Pipes , Damage , Dynamic response , External pressure , Finite element analysis , Geometry , Resilience , Steel , Stress

Numerical Simulation of CFRP Reinforced Steel Pipe Elbows Subjected to Cyclic Loading

Giannoula Chatzopoulou, Ioannis Skarakis, Spyros A. Karamanos, Nicholas G. Tsouvalis, Aglaia E. Pournara

PVP 2016; V003T03A027doi:https://doi.org/10.1115/PVP2016-63853

Abstract

View Article

PDF

Topics: Carbon reinforced plastics , Computer simulation , Pipes , Steel , Piping systems , Fatigue , Finite element model , Pipeline integrity , Pipelines , Plasticity

Allowable Piping Imposed Nozzle Loads on Pumps of Large Diameter Nozzles

Bhaskar Dattatray Shitolé

PVP 2016; V003T03A028doi:https://doi.org/10.1115/PVP2016-64034

Abstract

View Article

PDF

Topics: Nozzles , Pipes , Pumps , Stress , American Petroleum Institute , Engineers , Flow (Dynamics) , Suction

Design and Analysis of Pressure Vessel, Heat Exchanger, and Components

Considerations in the Capacity Uprating of an EOR HRSG

John J. Aumuller, Carlos F. Lange, Michael J. Humphries

PVP 2016; V003T03A029doi:https://doi.org/10.1115/PVP2016-63015

Abstract

View Article

PDF

Topics: Heat recovery steam generators , Tertiary petroleum recovery , Boilers , Damage , Pipes , Steam , Alloys , Carbon steel , Corrosion , Equipment performance

The Case for MACA: The Optimization of Corrosion Allowance

Jaan Taagepera

PVP 2016; V003T03A030doi:https://doi.org/10.1115/PVP2016-63074

Abstract

View Article

PDF

Topics: Clearances (Engineering) , Corrosion , Optimization , Vessels , Design , Pressure , Temperature , Fitness-for-service , Pressure vessels , Boilers

Guidelines for MACA: The Optimization of Corrosion Allowance

Jaan Taagepera, Craig Boyak

PVP 2016; V003T03A031doi:https://doi.org/10.1115/PVP2016-63075

Abstract

View Article

PDF

Topics: Clearances (Engineering) , Corrosion , Optimization , Design , Pressure , Stress , Temperature , Maintenance , Pressure vessels , Fitness-for-service

Study on Intermediate Support of Tall Columns for FPSO Topside Structures

Takanori Nanjo, Toshikazu Miyashita, Shunji Kataoka, Takuya Sato

PVP 2016; V003T03A032doi:https://doi.org/10.1115/PVP2016-63177

Abstract

View Article

PDF

Topics: FPSO , Deformation , Hull , Natural gas fields , Ocean engineering , Pressure vessels , Ships , Waves

Calculation and Analysis for Pressure Vessel Rupture Study Under Fire in Plant

Yoshiyasu Ito, Akira Tsuruoka, Yoshiyuki Waki, Hiroko Osedo

PVP 2016; V003T03A033doi:https://doi.org/10.1115/PVP2016-63184

Abstract

View Article

PDF

Topics: Fire , Pressure vessels , Rupture , Design , Carbon steel , Pressure , Stainless steel , Vessels , Computational methods , Finite element methods

Design of Cylindrical Steel Storage Tanks: A Linear Elastic Analysis Approach

Eyas Azzuni, Sukru Guzey

PVP 2016; V003T03A034doi:https://doi.org/10.1115/PVP2016-63202

Abstract

View Article

PDF

Topics: Design , Elastic analysis , Steel , Storage tanks , Hoop stress , Shells , Hydrostatic pressure , Pipes , Thin shells

A Review of the Shell Buckling and Stiffener Ring Design for Cylindrical Steel Storage Tanks

Eyas Azzuni, Sukru Guzey

PVP 2016; V003T03A035doi:https://doi.org/10.1115/PVP2016-63204

Abstract

View Article

PDF

Topics: Buckling , Design , Shells , Steel , Storage tanks , Stress , Wind , External pressure , Hoop stress , Hydrostatic pressure

Stress Analysis and Structural Integrity Evaluations of Pressure Vessel in Molten Salt Reactor

Xiaoyan Wang, Shifeng Zhu, Xiao Wang, Yun Cao

PVP 2016; V003T03A036doi:https://doi.org/10.1115/PVP2016-63217

Abstract

View Article

PDF

Topics: Molten salt reactors , Pressure vessels , Stress analysis (Engineering) , Creep , Design , Fatigue , Safety , Deformation , Nuclear reactors , Pressure

Fatigue Life Investigation of a High Pressure Inner Casing Under In-Service Conditions

Hui Hong, Weizhe Wang, Zhenwei Cai

PVP 2016; V003T03A037doi:https://doi.org/10.1115/PVP2016-63401

Abstract

View Article

PDF

Topics: Fatigue life , High pressure (Physics) , Stress , Fatigue damage , Pressure , Steam , Temperature , Damage , Finite element model , Fluctuations (Physics)

A III⁺ Generation Pressurizer Stress Analysis and Evaluation

Gang Zheng, Feng Shen, Yi Peng, Fang Wu, Jundong Wang, Lipei Chen

PVP 2016; V003T03A038doi:https://doi.org/10.1115/PVP2016-63415

Abstract

View Article

PDF

Topics: Stress analysis (Engineering) , Nozzles , ASME Boiler and Pressure Vessel Code , Nuclear power stations , Safety , Design , Optimization , Finite element methods , Mechanical engineers , Shells

Evaluation of Constraint Effect due to Crack Location and Bottom Head Shape

Shin-Beom Choi, Han-Bum Surh, Jong-Wook Kim

PVP 2016; V003T03A039doi:https://doi.org/10.1115/PVP2016-63423

Abstract

View Article

PDF

Topics: Fracture (Materials) , Shapes , Stress , Finite element analysis

Consideration of Irradiation Effect in Components Design: Illustration of a Way to Introduce an Environmental Effect in the Design Process

C. Pétesch, T. Lebarbé, C. Pascal, S. Dubiez-Le Goff

PVP 2016; V003T03A040doi:https://doi.org/10.1115/PVP2016-63567

Abstract

View Article

PDF

Topics: Design , Irradiation (Radiation exposure) , Damage , Sodium fast reactors , Breeder reactors , Creep , Fatigue damage , Fusion reactors , High temperature , Pressure

Effects of Multiple Parallel Flaws on Crack Opening Area

Matthew Walter, Daniel Sommerville

PVP 2016; V003T03A041doi:https://doi.org/10.1115/PVP2016-63616

Abstract

View Article

PDF

Topics: Fracture (Materials) , Boiling water reactors , Cracking (Materials) , Fracture (Process) , Finite element analysis , Leakage , Brittle fracture , Collapse , Failure mechanisms , Fracture mechanics

Sensitivity Study of Boundary Conditions for a 9-Meter Drop of a Shielded Cask for Operational Handling of a Container of Liquid

Michael C. Yaksh, Suresh Babu

PVP 2016; V003T03A042doi:https://doi.org/10.1115/PVP2016-63650

Abstract

View Article

PDF

Topics: Boundary-value problems , Containers , Damage , Dynamic response , Pressure vessels , Compression , Computers , Concretes , Design , Finite element analysis

Effects of Multiple Co-Linear Flaws on Crack Opening Area

Stephen M. Parker, Matthew C. Walter, Daniel V. Sommerville

PVP 2016; V003T03A043doi:https://doi.org/10.1115/PVP2016-63689

Abstract

View Article

PDF

Topics: Fracture (Materials) , Cracking (Materials) , Fracture (Process) , Boiling water reactors , Finite element analysis , Leakage , Fracture mechanics , Inspection , Nuclear industry , Nuclear power stations

Effect of Piping Loads on Vessel Support and Foundation Design

Radoslav Stefanovic, Christopher Doctor, George Miller, May Diaz-Barrie, Alexander Sharif, Peter Ranieri, Kirsten Pynten

PVP 2016; V003T03A044doi:https://doi.org/10.1115/PVP2016-63694

Abstract

View Article

PDF

Topics: Design , Pipes , Stress , Vessels , Nozzles , Engineers , Pressure vessels , Wind , Petrochemicals , Civil engineering

The Method for Structural Reliability Estimation of the Heat Exchanger Tubes of Steam Generator of WWER NPPs

Igor Orynyak, Maksym Zarazovskii, Mykhaylo Borodii

PVP 2016; V003T03A045doi:https://doi.org/10.1115/PVP2016-63710

Abstract

View Article

PDF

Topics: Boilers , Heat exchangers , Nuclear power stations , Reliability , Probability , Leakage , Pressure , Failure , Fracture (Materials) , Fracture (Process)

Weld Joint Efficiency in Design by Analysis

Trevor G. Seipp

PVP 2016; V003T03A046doi:https://doi.org/10.1115/PVP2016-63759

Abstract

View Article

PDF

Topics: Design , American Petroleum Institute , Fitness-for-service , Vessels

Validating FEA Simulations of Structural Collapse of a Complex Vessel Geometry

J. Adin Mann, III, Brandon Yost, Gregory Westwater, Christopher R. Johnson, Brett Pollock, Katharine Liu

PVP 2016; V003T03A047doi:https://doi.org/10.1115/PVP2016-63817

Abstract

View Article

PDF

Topics: Collapse , Engineering simulation , Finite element analysis , Geometry , Simulation , Vessels , Pressure vessels , Boilers , Performance , Pressure

Fatigue

Thermo-Mechanical Fatigue Life of Coke Drum Skirt Attachment Designs

Gurumurthy Kagita, Balaji Srinivasan, Penchala Sai Krishna Pottem, Gudimella G. S. Achary, Subramanyam V. R. Sripada

PVP 2016; V003T03A048doi:https://doi.org/10.1115/PVP2016-63111

Abstract

View Article

PDF

Topics: Coke , Fatigue life , Thermomechanics , Design , Cycles , Transients (Dynamics) , Boundary-value problems , Failure , Fatigue , Heat transfer coefficients

Evolution of Fatigue Post-Processing Methods in the EDF Open-Access FEA Code ASTER

Thomas Métais, Sarah Plessis, The-Hiep Chau, Jean-Christophe Le Roux

PVP 2016; V003T03A049doi:https://doi.org/10.1115/PVP2016-63126

Abstract

View Article

PDF

Topics: Fatigue , Finite element analysis , Nuclear power stations , Bridges (Structures) , Computer software , Design , Electric arc furnaces , Engineering standards , Fracture mechanics , Japan Society of Mechanical Engineers

A Case Study Evaluating the Effects of High Cycle Thermal Loading Within a Pressurised Water Reactor Mixing Tee Using Conjugate CFD/FE Methods

James Wilson, Chris Currie, Michael Jones, Lewis Davenport

PVP 2016; V003T03A050doi:https://doi.org/10.1115/PVP2016-63233

Abstract

View Article

PDF

Topics: Computational fluid dynamics , Cycles , Water , Temperature , Fatigue , Flow (Dynamics) , Metals , Finite element analysis , Pipes , Damage

Fatigue Management During LTO of Nuclear Power Plant Borssele

M. H. C. Hannink, C. G. M. de Bont, F. J. Blom, P. W. B. Quist, A. E. de Jong, W. Besuijen

PVP 2016; V003T03A051doi:https://doi.org/10.1115/PVP2016-63247

Abstract

View Article

PDF

Topics: Fatigue , Nuclear power stations , Stress , Fatigue analysis , Transients (Dynamics) , Cycles , Monitoring systems , Safety , Temperature

Application of Numerical Modeling for Predicting the Fatigue Crack Growth of an Elliptical Crack in Kelly Valves

Hamidreza Ahmadimoghaddamseighalani, Pierre Mertiny

PVP 2016; V003T03A052doi:https://doi.org/10.1115/PVP2016-63306

Abstract

View Article

PDF

Topics: Computer simulation , Fatigue cracks , Fracture (Materials) , Valves , Fatigue life , Computer programming , Crack propagation , Drilling , Failure , Fatigue

Analytical Comparison Between Separate Reinforcement Nozzle and Integral Reinforcement Nozzle Behaviors Under Cyclic Loading

Bassel Y. Mohamed, Tamer I. Eid

PVP 2016; V003T03A053doi:https://doi.org/10.1115/PVP2016-63318

Abstract

View Article

PDF

Topics: Nozzles , Stress , Construction , Shells , Fatigue failure , Finite element analysis , Computer software , Cycles , Fatigue , Fatigue damage

Studies on Fatigue Design Margins of Welded Steel Structures

Masahiro Takanashi

PVP 2016; V003T03A054doi:https://doi.org/10.1115/PVP2016-63521

Abstract

View Article

PDF

Topics: Fatigue design , Steel , Design , Stress , Boilers , Pressure vessels

PWR Effect on Crack Initiation Under Equi-Biaxial Loading Development of the Experiment

G. Perez, C. Gourdin, S. Courtin, J. C. Le Roux

PVP 2016; V003T03A055doi:https://doi.org/10.1115/PVP2016-63561

Abstract

View Article

PDF

Topics: Fracture (Materials) , Pressurized water reactors , Fatigue , Collaboration , Design , Fatigue design , Fatigue testing , In-service inspection , Polishing , Stainless steel

Proposal for an Improved Engineering Fatigue Lifetime Assessment Concept

Jürgen Rudolph, Paul Wilhelm, Armin Roth, Matthias Herbst, Matthias C. Kammerer, Xaver Schuler, Karl-Heinz Herter

PVP 2016; V003T03A056doi:https://doi.org/10.1115/PVP2016-63576

Abstract

View Article

PDF

Topics: Fatigue , Fatigue life , Fatigue testing , Design , Nuclear power stations , Pipes , Damage , Databases , Engineering standards , Failure

Fatigue Life Estimation of Pitted Specimens by Means of an Integrated Fracture Mechanics Approach

Nicolas O. Larrosa, Mirco D. Chapetti, Robert A. Ainsworth

PVP 2016; V003T03A057doi:https://doi.org/10.1115/PVP2016-63888

Abstract

View Article

PDF

Topics: Fatigue life , Fracture mechanics , Fracture (Materials) , Stress , Failure , Corrosion , Crack propagation , Cycles , Endurance limit , Fatigue

Fitness for Service Evaluations

Fitness for Service Evaluation of Class 1 Piping Component

Usama Abdelsalam, Dk Vijay, Andrew Glover

PVP 2016; V003T03A058doi:https://doi.org/10.1115/PVP2016-63004

Abstract

View Article

PDF

Topics: Fitness-for-service , Pipes , Pressure , Stress , Collapse , Fatigue , Fracture (Materials) , Modeling , Wall thickness

Determination of Service Life for Undamaged and Damaged Delayed Coker Drums

John J. Aumuller, Vincent A. Carucci

PVP 2016; V003T03A059doi:https://doi.org/10.1115/PVP2016-63006

Abstract

View Article

PDF

Topics: Service life (Equipment) , Damage , Design , Shells , Thermomechanics , Carbon , Climate , Coke , Fatigue , Governments

An Improved Method of Evaluating the Stress Intensity Factor for a Penetrating Circumferential Defect in a Self-Balancing Residual Stress Field in a Weld

Liwu Wei, Jinhua Shi, John Buckland

PVP 2016; V003T03A060doi:https://doi.org/10.1115/PVP2016-63042

Abstract

View Article

PDF

Topics: Stress , Stress concentration , Cylinders , Welding , Finite element analysis , Bending (Stress) , Fracture (Materials) , Membranes , Welded joints

The Influence of a Non-Aligned Semi-Elliptical Surface Crack on a Quarter-Circle Corner Crack in an Infinitely Large Plate Under Uniaxial Tension

M. Perl, Q. Ma, C. Levy

PVP 2016; V003T03A061doi:https://doi.org/10.1115/PVP2016-63081

Abstract

View Article

PDF

Topics: Corners (Structural elements) , Fracture (Materials) , Surface cracks , Tension , Fitness-for-service , Separation (Technology) , Shapes , Geometry , Inspection

Fitness-for-Service of a Column Equipment Containing Dent Defects Based on API 579 Level 3 Analysis and Considering the Dynamic Loads

Zhiyuan Han, Guoshan Xie, Liang Sun, Minzhen Zhao, Haiyan Qian, Luowei Cao

PVP 2016; V003T03A062doi:https://doi.org/10.1115/PVP2016-63527

Abstract

View Article

PDF

Topics: American Petroleum Institute , Fitness-for-service , Stress , Buckling , Earthquakes , Wind , Collapse , Damage , Dimensions , Failure

Overview of Aging Management Program for CANDU Feeders: Canadian Regulatory Perspectives

Seyun Eom, Sue Liu, John Jin

PVP 2016; V003T03A063doi:https://doi.org/10.1115/PVP2016-63545

Abstract

View Article

PDF

Topics: Amperes , Corrosion , Fitness-for-service , Flow (Dynamics) , In-service inspection , Inspection , Life cycle management , Pipes

FFS Assessment of Pressurized Equipment Utilizing a Thickness Mapping Tool

Benjamin Hantz, Venkata M. K. Akula, John Leroux

PVP 2016; V003T03A064doi:https://doi.org/10.1115/PVP2016-63646

Abstract

View Article

PDF

Topics: American Petroleum Institute , Computer-aided engineering , Finite element analysis , Finite element methods , Finite element model , Fitness-for-service , Load bearing capacity , Maintenance , Modeling , Pressure vessels

Bulging Patterns of Coke Drums

Mahmod Samman

PVP 2016; V003T03A065doi:https://doi.org/10.1115/PVP2016-63812

Abstract

View Article

PDF

Topics: Coke , Design , Cracking (Materials) , Databases , Failure mechanisms , Fire , Fracture (Materials) , Fracture (Process) , Lasers , Leakage

Anchor Bolt Failures in Coke Drums

Mahmod Samman

PVP 2016; V003T03A066doi:https://doi.org/10.1115/PVP2016-63813

Abstract

View Article

PDF

Topics: Anchor bolts , Coke , Failure , Friction , Temperature gradient , Displacement , Finite element model , Plates (structures) , Shear (Mechanics) , Temperature

Fracture

Applicability of a Deterministic Approach to Transfer the Minimum Fracture Toughness Between Different Temperatures in the DBTT Region

Toshiyuki Meshii, Teruhiro Yamaguchi, Koki Fukinbara

PVP 2016; V003T03A067doi:https://doi.org/10.1115/PVP2016-63142

Abstract

View Article

PDF

Topics: Fracture toughness , Temperature , Fracture (Materials) , Stress , Brittleness , Displacement , Electromagnetic scattering , Phase transition temperature

Applicability of a Deterministic Approach to Predict the Minimum Fracture Toughness in the DBTT Region From Tensile Test Results: Example for 0.5T SE(B) and 1TCT Specimens

Toshiyuki Meshii, Yusuke Fujita, Teruhiro Yamaguchi

PVP 2016; V003T03A068doi:https://doi.org/10.1115/PVP2016-63143

Abstract

View Article

PDF

Topics: Fracture toughness , Fracture (Materials) , Stress , Temperature , Brittleness , Carbon steel , Displacement , Failure , Phase transition temperature , Size effect

Rationalizing Sampling of Pipe Material Properties for Probabilistic Pipe Fracture Analyses

Richard Olson, Bruce Young

PVP 2016; V003T03A069doi:https://doi.org/10.1115/PVP2016-63168

Abstract

View Article

PDF

Topics: Fracture (Materials) , Materials properties , Pipes , Fracture toughness , Stress-strain curves , Stress , Displacement , Leakage , Stability , Tensile strength

A Simple Approach for Including Weld Residual Stresses in the Calculation of Pipe Circumferential Through-Wall Crack Opening Displacements

Richard Olson

PVP 2016; V003T03A070doi:https://doi.org/10.1115/PVP2016-63169

Abstract

View Article

PDF

Topics: Fracture (Materials) , Pipes , Residual stresses , Finite element analysis , Pressure , Displacement

An Approach to Modification of Compact Tension J-R Curves for Analysis of Surface Cracked Pipe Stability

Richard Olson

PVP 2016; V003T03A071doi:https://doi.org/10.1115/PVP2016-63170

Abstract

View Article

PDF

Topics: Pipes , Stability , Tension , Fracture toughness , Surface cracks , Fracture (Materials) , Fracture (Process) , Load bearing capacity , Fracture mechanics

Influences of T-Stress on Constraint Effect in Mismatched Modified Boundary Layer Model for Creep Crack

Yanwei Dai, Yinghua Liu, Haofeng Chen

PVP 2016; V003T03A072doi:https://doi.org/10.1115/PVP2016-63220

Abstract

View Article

PDF

Topics: Boundary layers , Creep , Fracture (Materials) , Stress , High temperature

Tests on SENT and CT Specimens to Study Geometry Effects in the Brittle to Ductile Transition

Patrick Le Delliou, Samuel Geniaut

PVP 2016; V003T03A073doi:https://doi.org/10.1115/PVP2016-63235

Abstract

View Article

PDF

Topics: Brittleness , Geometry , Fracture (Materials) , Fracture toughness , Piping systems , Tension , Testing , Aluminum alloys , Carbon , Deformation

The Digital Image Correlation Technique Applied to Single Specimen Testing Methodology

Patrick Le Delliou, Christophe Sonnefraud, Willy Vincent

PVP 2016; V003T03A074doi:https://doi.org/10.1115/PVP2016-63245

Abstract

View Article

PDF

Topics: ASTM International , Ceramics , Disks , Displacement , Electric potential , Fracture (Materials) , Fracture toughness , Gages , High temperature , Noise (Sound)

Improvement of the LBB.ENG2 Circumferential Through-Wall Crack J-Estimation Scheme

Richard Olson, Sureshkumar Kalyanam, Jeong Soon Park, Frederick W. Brust

PVP 2016; V003T03A075doi:https://doi.org/10.1115/PVP2016-63264

Abstract

View Article

PDF

Topics: Fracture (Materials) , Pipes , Finite element analysis , Pressure , Stability , Failure , Fittings , Fracture mechanics , Probability , Rupture

Elastic and Plastic Microscopic Deformation of Polycrystalline Pure Titanium Under Tension

Naoya Tada, Yuki Doi

PVP 2016; V003T03A076doi:https://doi.org/10.1115/PVP2016-63268

Abstract

View Article

PDF

Topics: Deformation , Tension , Titanium , Stress , Crystals , Microscopes , Aerospace industry , Anisotropy , Biocompatibility , Biomedicine

Experimental and Numerical Evaluation of Fracture Toughness on Electron Beam Welded Joint in Al6061-T6

W. Rekik, O. Ancelet, C. Gardin, F. Hamon

PVP 2016; V003T03A077doi:https://doi.org/10.1115/PVP2016-63449

Abstract

View Article

PDF

Topics: Cathode ray oscilloscopes , Electron beams , Fracture toughness , Welded joints , Base metals , Heat , Mechanical behavior , Yield stress , Aluminum alloys , Engineering prototypes

Interaction of Residual Stresses With Applied Stresses in a Dissimilar Metal Electron Beam Welded Specimen

K. Abburi Venkata, C. E. Truman, S. Khayatzadeh, H. E. Coules

PVP 2016; V003T03A078doi:https://doi.org/10.1115/PVP2016-63494

Abstract

View Article

PDF

Topics: Cathode ray oscilloscopes , Electron beams , Metals , Residual stresses , Stress , Fracture (Materials) , Welding , Computer simulation , Failure , Steel

Inelastic, Nonlinear, and Limit Load Analysis

Effect of Bend Angle on Gross Plastic Deformation of Pipe Bends for Out-of-Plane Bending: A Study Using Plastic Work Curvature Method

Anindya Bhattacharya, Sachin Bapat, Hardik Patel, Shailan Patel, Michael P. Cross

PVP 2016; V003T03A079doi:https://doi.org/10.1115/PVP2016-63153

Abstract

View Article

PDF

Topics: Deformation , Pipe bends , Pipes , Collapse , Pressure , Stress , Failure mechanisms , Piping systems , Warping

Nonlinear Finite Element Analysis of Pipe Bends Subjected to Inplane Bending

Venkata M. K. Akula, David W. Martin

PVP 2016; V003T03A080doi:https://doi.org/10.1115/PVP2016-63659

Abstract

View Article

PDF

Topics: Finite element analysis , Pipe bends , Bricks , Shells , Collapse , Pipelines , Computer software , Finite element methods , Fluid dynamics , Modeling

Validation of FE Analysis Using a Test to Destruction Experiment for a Vessel Post Weld Heat Treatment Stand

Adam J. Slee, Alan Stevenson, Ben Pellereau, John Holbourn, Keith Wright

PVP 2016; V003T03A081doi:https://doi.org/10.1115/PVP2016-63958

Abstract

View Article

PDF

Topics: Finite element analysis , Heat treating (Metalworking) , Vessels , Buckling , Temperature , Design , Stress , Center of mass , Collapse , Creep

Structural Response and Failure Assessment for BDBE

Experimental Study on Ultimate Strength of Single and Double Type Bellows Under Internal Pressure

Masanori Ando, Hiroki Yada, Kazuyuki Tsukimori, Masakazu Ichimiya, Yoshinari Anoda

PVP 2016; V003T03A082doi:https://doi.org/10.1115/PVP2016-63146

Abstract

View Article

PDF

Topics: Bellows (Equipment) , Pressure , Tensile strength , Containment vessels , Fracture toughness , Design , Coolants , Fast neutron reactors , Safety , Countermeasures

Experimental Study on Ultimate Strength of a Ellipsoidal Dished Head Plate Under Pressure on Convex Surface

Hiroki Yada, Masanori Ando, Kazuyuki Tsukimori, Masakazu Ichimiya, Yoshinari Anoda

PVP 2016; V003T03A083doi:https://doi.org/10.1115/PVP2016-63147

Abstract

View Article

PDF

Topics: Pressure , Tensile strength , Containment vessels , Design , Fracture toughness , Safety , Coolants , Countermeasures , Evaluation methods , External pressure

Applicability of the Multilayer Kinematic Hardening Model to Predict Inelastic Behavior of Piping Systems Under Excessive Seismic Loading

Koji Iwata, Chuanrong Jin, Yasuhisa Karakida, Naoto Kasahara

PVP 2016; V003T03A084doi:https://doi.org/10.1115/PVP2016-63216

Abstract

View Article

PDF

Topics: Hardening , Kinematics , Piping systems , Earthquakes , Carbon steel , Dynamic analysis , Failure , Approximation , Constitutive equations , Excitation

Creep Buckling and Post Buckling Behaviors of Stainless Steel Tube Columns Under External Pressure at Extremely High Temperatures

Byeongnam Jo, Koji Okamoto, Naoto Kasahara

PVP 2016; V003T03A085doi:https://doi.org/10.1115/PVP2016-63226

Abstract

View Article

PDF

Topics: Buckling , Creep , External pressure , High temperature , Stainless steel , Failure , Temperature , Heating , Pressure , Stress

Structural Analysis Approach for Risk Assessment Under BDBE

Naoto Kasahara, Izumi Nakamura, Hideo Machida, Koji Okamoto, Takuya Sato

PVP 2016; V003T03A086doi:https://doi.org/10.1115/PVP2016-63416

Abstract

View Article

PDF

Topics: Risk assessment , Structural analysis , Failure mechanisms , Failure , Design , Accidents , Creep , Defense industry , Earthquakes , Inelastic analysis

Analytical Study on Failure Mode Map for Lower Formed Head of Reactor Pressure Vessel Under BDBE

Hiroshi Ogawa, Hideo Machida, Naoto Kasahara

PVP 2016; V003T03A087doi:https://doi.org/10.1115/PVP2016-63487

Abstract

View Article

PDF

Topics: Failure mechanisms , Reactor vessels , Design , Failure , Earthquakes , Computer simulation , High temperature , Nozzles , Pressure , Stress

Thermal Stresses and Elevated Temperature Design

Micro-Porous Coatings and Enhanced CHF for Downward Facing Boiling During Passive Emergency Reactor Cooling

Albert E. Segall, Faruk A. Sohag, Faith R. Beck, Lokanath Mohanta, Fan-Bill Cheung, Timothy J. Eden, John Potter

PVP 2016; V003T03A088doi:https://doi.org/10.1115/PVP2016-63014

Abstract

View Article

PDF

Topics: Boiling , Coatings , Critical heat flux , Emergencies , Nuclear reactor cooling , Sprays , Accidents , Vapors , Vessels , Cavities

Analytical Expression of Elastic Follow-Up Factors in Fully-Plastic Situation for Creep-Fatigue Damage Assessment of High Temperature Components

Terutaka Fujioka

PVP 2016; V003T03A089doi:https://doi.org/10.1115/PVP2016-63031

Abstract

View Article

PDF

Topics: Creep , Damage assessment , Fatigue , High temperature , Finite element analysis , Stress , Breeder reactors , Cantilevers , Cylinders , Design

Elastic Allowable Stress Basis for Elevated Temperature Design in the Creep Regime

Chithranjan Nadarajah, Benjamin F. Hantz, Sujay Krishnamurthy

PVP 2016; V003T03A090doi:https://doi.org/10.1115/PVP2016-63136

Abstract

View Article

PDF

Topics: Creep , Design , Stress , Temperature , Pressure vessels , ASME Boiler and Pressure Vessel Code , Finite element analysis , Stress analysis (Engineering)

On a Design Acceptability of 90° Elbow According to Pipe Length at Elevated Temperature Condition

Seong-Yun Jeong, Min-Gu Won, Jae-Boong Choi, Nam-Su Huh, Young-Jin Oh

PVP 2016; V003T03A091doi:https://doi.org/10.1115/PVP2016-63317

Abstract

View Article

PDF

Topics: Design , Pipes , Temperature , Damage , Creep , Sodium fast reactors , Fatigue , Fatigue damage , Finite element analysis , Generation IV reactors

Establishing Recommended Guidance for Local Post Weld Heat Treatment Configurations Based on Thermal-Mechanical Finite Element Analysis

Phillip E. Prueter, Brian Macejko

PVP 2016; V003T03A092doi:https://doi.org/10.1115/PVP2016-63581

Abstract

View Article

PDF

Topics: Finite element analysis , Heat treating (Metalworking) , Maintenance , Pressure , Pressure vessels , Residual stresses , American Petroleum Institute , Cracking (Materials) , Fracture (Materials) , Fracture (Process)

Thermo-Mechanical Response of Multi-Layered Cylinders Under Pressure and Thermal Loading With Generalized Plane Strain Condition

Sang-Guk Kang, Kuao-John Young

PVP 2016; V003T03A093doi:https://doi.org/10.1115/PVP2016-63636

Abstract

View Article

PDF

Topics: Cylinders , Plane strain , Pressure , Thermomechanics , Algorithms , Finite element model , Stress

Thermal Stress Calculation Based on Enhanced 3-Dimensional Green’s Function Approach Considering Temperature-Dependent Effect

Han-Bum Surh, Shin-Beom Choi, Jong-Wook Kim, Han-Ok Ko

PVP 2016; V003T03A094doi:https://doi.org/10.1115/PVP2016-63722

Abstract

View Article

PDF

Topics: Temperature , Thermal stresses , Fatigue , Cooling systems , Finite element analysis , Heat , Materials properties , Monitoring systems , Nozzles , Steady state

Elevated Temperature Analysis in BPV Code Section VIII Division 2 Part 5

J. Adin Mann, III, Chithranjan Nadarajah, Benjamin F. Hantz, Sujay Krishnamurthy

PVP 2016; V003T03A095doi:https://doi.org/10.1115/PVP2016-63820

Abstract

View Article

PDF

Topics: Temperature , Design , Fatigue , ASME Boiler and Pressure Vessel Code , Buckling , Collaboration , Construction , Creep , Elastic analysis , Failure mechanisms

All Years

Proceedings Papers

Design and Analysis

CFD in Design and Analysis

Design and Analysis of Bolted Joints

Design and Analysis of Piping and Components

Design and Analysis of Pressure Vessel, Heat Exchanger, and Components

Fatigue

Fitness for Service Evaluations

Fracture

Inelastic, Nonlinear, and Limit Load Analysis

Structural Response and Failure Assessment for BDBE

Thermal Stresses and Elevated Temperature Design

Email alerts

Most Read Proceedings Papers in PVP

Journals

Conference Proceedings

eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only