Volumes | Pressure Vessels and Piping Conference | American Society of Mechanical Engineers Digital Collection

Skip Nav Destination

Volume 6B: Materials and Fabrication

Materials and Fabrication

Manufacturing and Mitigation Process Simulation

Geometrical Comparison of Numerical Models Used in the Design and Validation of Mechanically Rolled Tube-Tubesheet Joints

Søren Bøgelund Madsen, Claus Hessler Ibsen, Bo Gervang, Anders Schmidt Kristensen

PVP 2015; V06BT06A001doi:https://doi.org/10.1115/PVP2015-45684

View Articletitled, Geometrical Comparison of Numerical Models Used in the Design and Validation of Mechanically Rolled Tube-Tubesheet Joints

PDF

Topics: Computer simulation , Design , Plane strain , Stress , Deformation , Geometry

Numerical Simulation of Screw Manufacturing Process for the Assessment of Surface Integrity

Vincent Robin, Philippe Gilles, Benoît Bosco, Louis Mazuy, Frédéric Valiorgue

PVP 2015; V06BT06A002doi:https://doi.org/10.1115/PVP2015-45864

Abstract

View Articletitled, Numerical Simulation of Screw Manufacturing Process for the Assessment of Surface Integrity

PDF

Topics: Computer simulation , Manufacturing , Screws , Pressurized water reactors , Stainless steel , Stress , Stress corrosion cracking , Machining , Simulation , Water

Modelling of Ultrasonic Shot Peening

Vincent Robin, Philippe Gilles, Alexandre Brosse, Thibaut Chaise

PVP 2015; V06BT06A003doi:https://doi.org/10.1115/PVP2015-45973

Abstract

View Articletitled, Modelling of Ultrasonic Shot Peening

PDF

Topics: Modeling , Shot peening , Manufacturing , Fatigue damage , Residual stresses , Stress , Coatings , Corrosion , Finishes , Stress corrosion cracking

Materials and Technologies for Nuclear Power Plants

The Effects of Thermal Aging on Microstructural and Mechanical Properties of GH3535 Alloy Welded Joint

Chen Shuangjian, Li Chaowen, Yu Kun, Li Zhijun, Xintai Zhou, Li Zhong

PVP 2015; V06BT06A004doi:https://doi.org/10.1115/PVP2015-45126

Abstract

View Articletitled, The Effects of Thermal Aging on Microstructural and Mechanical Properties of GH3535 Alloy Welded Joint

PDF

Topics: Alloys , Mechanical properties , Welded joints , Fracture (Materials) , Fracture (Process) , Grain size , Base metals , Ductile fracture , Heat , Mechanical behavior

Friction Stir Seal Welding (FSSW) Tube-Tubesheet Joints Made of Steel

Abdel Rahman Shuaib, Fadi Al-Badour, Nesar Merah

PVP 2015; V06BT06A005doi:https://doi.org/10.1115/PVP2015-45550

Abstract

View Articletitled, Friction Stir Seal Welding (FSSW) Tube-Tubesheet Joints Made of Steel

PDF

Topics: Friction , Steel , Welding , ASTM International , Welded joints , Carbon steel , Position control , Rollers , Tungsten , Water

Characterization of Advanced Steels as Accident Tolerant Cladding for Light Water Reactor Nuclear Fuel

Raul B. Rebak

PVP 2015; V06BT06A006doi:https://doi.org/10.1115/PVP2015-45652

Abstract

View Articletitled, Characterization of Advanced Steels as Accident Tolerant Cladding for Light Water Reactor Nuclear Fuel

PDF

Topics: Accidents , Cladding systems (Building) , Light water reactors , Nuclear fuels , Steel , Alloys , Fuels , Aluminum , Steam , Chemical kinetics

Qualification of Temper Bead Welding by an Alternative Hardness Testing Approach

Steven L. McCracken, Benjamin Sutton

PVP 2015; V06BT06A007doi:https://doi.org/10.1115/PVP2015-45663

Abstract

View Articletitled, Qualification of Temper Bead Welding by an Alternative Hardness Testing Approach

PDF

Topics: Testing , Welding , Heat , Impact testing

Materials for Hydrogen Service

Hydrogen Transport and Hydrogen-Assisted Cracking in SUS304 Stainless Steel During Deformation at Low Temperatures

Lin Zhang, Bai An, Takashi Iijima, Chris San Marchi, Brian Somerday

PVP 2015; V06BT06A008doi:https://doi.org/10.1115/PVP2015-45211

Abstract

View Articletitled, Hydrogen Transport and Hydrogen-Assisted Cracking in SUS304 Stainless Steel During Deformation at Low Temperatures

PDF

Topics: Deformation , Fracture (Process) , Hydrogen , Low temperature , Stainless steel , Temperature , Atomic force microscopy , Hydrogen embrittlement , Magnetic fields , Microscopy

Measurements of Fatigue Crack Growth Rates of the Heat-Affected Zones of Welds of Pipeline Steels

Andrew J. Slifka, Elizabeth S. Drexler, Robert L. Amaro, Damian S. Lauria, Louis E. Hayden, Christopher N. McCowan, Jeffrey W. Sowards

PVP 2015; V06BT06A009doi:https://doi.org/10.1115/PVP2015-45242

Abstract

View Articletitled, Measurements of Fatigue Crack Growth Rates of the Heat-Affected Zones of Welds of Pipeline Steels

PDF

Topics: Fatigue cracks , Heat , Pipelines , Steel , Welded joints , Hydrogen , Base metals , American Petroleum Institute , Crack propagation , Fracture (Materials)

Hydrogen-Enhanced Fatigue of a Cr-Mo Steel Pressure Vessel

L. Briottet, I. Moro, J. Furtado, J. Solin, P. Bortot, G. M. Tamponi, R. Dey, B. Acosta-Iborra

PVP 2015; V06BT06A010doi:https://doi.org/10.1115/PVP2015-45267

Abstract

View Articletitled, Hydrogen-Enhanced Fatigue of a Cr-Mo Steel Pressure Vessel

PDF

Topics: Fatigue , Hydrogen , Pressure vessels , Steel , Pressure , Design , Fatigue cracks , Vessels , Cylinders , Alloys

Study of the Hydrogen Embrittlement Sensitivity of an X4CrNiMo 16.5.1 Stainless Steel and the Associated Electron Beam Weld

Florent Cusenza, Sylvain Ringeval, Stéphanie Thiébaut, François Buy, Thomas Paris, Isabelle Moro, Laurent Briottet, Vincent Vignal

PVP 2015; V06BT06A011doi:https://doi.org/10.1115/PVP2015-45283

Abstract

View Articletitled, Study of the Hydrogen Embrittlement Sensitivity of an X4CrNiMo 16.5.1 Stainless Steel and the Associated Electron Beam Weld

PDF

Topics: Electron beam welding , Hydrogen embrittlement , Stainless steel , Hydrogen , Embrittlement , Mechanical properties , Vessels , Base metals , Carbon , Corrosion resistance

Fracture Properties of a Cr-Mo Ferritic Steel in High-Pressure Gaseous Hydrogen

Takashi Iijima, Hisatake Itoga, Bai An, Chris San Marchi, Brian P. Somerday

PVP 2015; V06BT06A012doi:https://doi.org/10.1115/PVP2015-45328

Abstract

View Articletitled, Fracture Properties of a Cr-Mo Ferritic Steel in High-Pressure Gaseous Hydrogen

PDF

Topics: Fracture toughness , High pressure (Physics) , Hydrogen , Steel , Displacement , Pressure , Cracking (Materials) , Fracture (Materials) , Fracture (Process) , Stress

Development of a Modified A286 Alloy With Improved Strength at Elevated Temperature and an Evaluation of Its Hydrogen Embrittlement Susceptibility

Shinya Sato, Kouichi Takasawa, Rinzo Kayano

PVP 2015; V06BT06A013doi:https://doi.org/10.1115/PVP2015-45336

Abstract

View Articletitled, Development of a Modified A286 Alloy With Improved Strength at Elevated Temperature and an Evaluation of Its Hydrogen Embrittlement Susceptibility

PDF

Topics: Alloys , Hydrogen embrittlement , Temperature , Rupture , Creep , Grain boundaries , Hydrogen , Tensile strength

Hydrogen-Assisted Cracking Threshold of High-Strength Low-Alloy Steel

Yusuke Yanagisawa, Wada Yoru, Toshihito Ohmi, A. Toshimitsu Yokobori

PVP 2015; V06BT06A014doi:https://doi.org/10.1115/PVP2015-45337

Abstract

View Articletitled, Hydrogen-Assisted Cracking Threshold of High-Strength Low-Alloy Steel

PDF

Topics: Alloys , Cracking (Materials) , Fracture (Process) , Hydrogen , Steel , Stress , Displacement , Fracture (Materials) , Brittle fracture , Diffusion (Physics)

Fatigue Life of Austenitic Stainless Steel in Hydrogen Environments

Chris San Marchi, Jonathan A. Zimmerman, X. Tang, Samuel J. Kernion, Konrad Thürmer, Kevin A. Nibur

PVP 2015; V06BT06A015doi:https://doi.org/10.1115/PVP2015-45421

Abstract

View Articletitled, Fatigue Life of Austenitic Stainless Steel in Hydrogen Environments

PDF

Topics: Fatigue life , Hydrogen , Stainless steel , Temperature , Weight (Mass) , Alloys , Fuel cell vehicles , Low temperature , Nickel , Automotive industry

Optimizing Measurement of Fatigue Crack Growth Relationships for Cr-Mo Pressure Vessel Steels in Hydrogen Gas

Brian Somerday, Paolo Bortot, John Felbaum

PVP 2015; V06BT06A016doi:https://doi.org/10.1115/PVP2015-45424

Abstract

View Articletitled, Optimizing Measurement of Fatigue Crack Growth Relationships for Cr-Mo Pressure Vessel Steels in Hydrogen Gas

PDF

Topics: Fatigue cracks , Hydrogen , Pressure vessels , Steel , Fracture (Materials) , Design , Stress , ASME Boiler and Pressure Vessel Code , Cycles , High pressure (Physics)

Fracture Threshold Measurements of Hydrogen Precharged Stainless Steel Weld Fusion Zones and Heat Affected Zones

Joseph A. Ronevich, Brian P. Somerday, Chris W. San Marchi, Dorian K. Balch

PVP 2015; V06BT06A017doi:https://doi.org/10.1115/PVP2015-45432

Abstract

View Articletitled, Fracture Threshold Measurements of Hydrogen Precharged Stainless Steel Weld Fusion Zones and Heat Affected Zones

PDF

Topics: Fracture (Materials) , Fracture (Process) , Heat , Hydrogen , Stainless steel , Welded joints , Displacement , Ferrites (Magnetic materials) , Design , Filler metals

Hydrogen Embrittlement for X-70 Pipeline Steel in High Pressure Hydrogen Gas

Un Bong Baek, Hae Moon Lee, Seung Wook Baek, Seung Hoon Nahm

PVP 2015; V06BT06A018doi:https://doi.org/10.1115/PVP2015-45475

Abstract

View Articletitled, Hydrogen Embrittlement for X-70 Pipeline Steel in High Pressure Hydrogen Gas

PDF

Topics: High pressure (Physics) , Hydrogen , Hydrogen embrittlement , Pipelines , Steel , American Petroleum Institute , Elongation , Failure , Fatigue cracks , Fracture (Materials)

Effect of Hydrogen on Tensile Strength and Ductility of Multi-Pass 304L / 308L Austenitic Stainless Steel Welds

Dorian K. Balch, Chris San Marchi

PVP 2015; V06BT06A019doi:https://doi.org/10.1115/PVP2015-45591

Abstract

View Articletitled, Effect of Hydrogen on Tensile Strength and Ductility of Multi-Pass 304L / 308L Austenitic Stainless Steel Welds

PDF

Topics: Ductility , Hydrogen , Stainless steel , Tensile strength , Welded joints , Elongation , Fillers (Materials) , Gages , Hydrogen embrittlement , Metals

Modeling of Hydrogen Embrittlement by a Ductile-Brittle Damage Model

Qianqiang Chen, Ziad Moumni, Jean Angles, Corinne Rouby

PVP 2015; V06BT06A020doi:https://doi.org/10.1115/PVP2015-45596

Abstract

View Articletitled, Modeling of Hydrogen Embrittlement by a Ductile-Brittle Damage Model

PDF

Topics: Brittleness , Damage , Hydrogen embrittlement , Modeling , Cracking (Materials) , Fracture (Process) , Hydrogen , Martensitic steel

Cohesive Zone Modeling of Hydrogen Assisted Cracking in a 15-5 PH Steel and Comparison With Experiments

Giovambattista Bilotta, Mandana Arzaghi, Gilbert Hénaff, Guillaume Benoit, Clara Moriconi, Damien Halm

PVP 2015; V06BT06A021doi:https://doi.org/10.1115/PVP2015-45631

Abstract

View Articletitled, Cohesive Zone Modeling of Hydrogen Assisted Cracking in a 15-5 PH Steel and Comparison With Experiments

PDF

Topics: Cracking (Materials) , Fracture (Process) , Hydrogen , Modeling , Steel , Fracture (Materials) , Pressure , Stress , Cycles , Fatigue

On Material Qualification and Strength Design for Hydrogen Service

Junichiro Yamabe, Hisao Matsunaga, Yoshiyuki Furuya, Saburo Matsuoka

PVP 2015; V06BT06A022doi:https://doi.org/10.1115/PVP2015-45723

Abstract

View Articletitled, On Material Qualification and Strength Design for Hydrogen Service

PDF

Topics: Design , Hydrogen , Safety , Fatigue cracks , High pressure (Physics) , Steel , Design methodology , Fatigue , Fatigue testing , Fracture (Materials)

Effects of External and Internal Hydrogen on Tensile Properties of Austenitic Stainless Steels Containing Additive Elements

Hisatake Itoga, Hisao Matsunaga, Junichiro Yamabe, Saburo Matsuoka

PVP 2015; V06BT06A023doi:https://doi.org/10.1115/PVP2015-45740

Abstract

View Articletitled, Effects of External and Internal Hydrogen on Tensile Properties of Austenitic Stainless Steels Containing Additive Elements

PDF

Topics: Hydrogen , Stainless steel , Tensile strength , Nitrogen , Nickel , Temperature , Hydrogen embrittlement , Stability , Titanium

Hydrogen-Assisted Cracking of Cr-Mo Steel in Slow Strain Rate Tensile Test With High-Pressure Gaseous Hydrogen

Hisao Matsunaga, Michio Yoshikawa, Ryota Kondo, Hisatake Itoga, Junichiro Yamabe, Saburo Matsuoka

PVP 2015; V06BT06A024doi:https://doi.org/10.1115/PVP2015-45742

Abstract

View Articletitled, Hydrogen-Assisted Cracking of Cr-Mo Steel in Slow Strain Rate Tensile Test With High-Pressure Gaseous Hydrogen

PDF

Topics: Fracture (Process) , High pressure (Physics) , Hydrogen , Steel , Temperature , Fracture (Materials) , Gases , Deformation , Ductility , Necking

Hydrogen Diffusion Analysis in the Fatigue Crack Growth Test Under High Pressure Hydrogen

Nobuyuki Ishikawa, Toshihito Ohmi, A. Toshimitsu Yokobori

PVP 2015; V06BT06A025doi:https://doi.org/10.1115/PVP2015-45809

Abstract

View Articletitled, Hydrogen Diffusion Analysis in the Fatigue Crack Growth Test Under High Pressure Hydrogen

PDF

Topics: Diffusion (Physics) , Fatigue cracks , High pressure (Physics) , Hydrogen , Hydrogen embrittlement , Fracture (Materials) , Stress , Computer simulation , Numerical analysis , Particulate matter

Mechanistic Modelling of Materials

Develop an Excel-Based Modeling Tool to Predict Weld and HAZ Cooling Rate and Hardness for Pipeline Welding

Yu-Ping Yang, Zhenning Cao, Jerry Gould, Tom McGaughy, Jon Jennings

PVP 2015; V06BT06A026doi:https://doi.org/10.1115/PVP2015-45010

Abstract

View Articletitled, Develop an Excel-Based Modeling Tool to Predict Weld and HAZ Cooling Rate and Hardness for Pipeline Welding

PDF

Topics: Cooling , Modeling , Pipelines , Welding , Heat , Arc welding , Boundary-value problems , Cycles , Databases , Design

On the Use of the Notch Master Curve for Apparent Fracture Toughness Predictions of Notched Ferritic Steels Operating Within the Ductile-to-Brittle Transition Zone

Sergio Cicero, Tiberio Garcia, Virginia Madrazo

PVP 2015; V06BT06A027doi:https://doi.org/10.1115/PVP2015-45043

Abstract

View Articletitled, On the Use of the Notch Master Curve for Apparent Fracture Toughness Predictions of Notched Ferritic Steels Operating Within the Ductile-to-Brittle Transition Zone

PDF

Topics: Brittleness , Fracture toughness , Steel , Fracture (Materials) , Fracture (Process) , Temperature

J’s Disability Could Explain all the Test Specimen Size Effects Observed for the Fracture Toughness (J_c) of a Material in the DBTT Region

Toshiyuki Meshii

PVP 2015; V06BT06A028doi:https://doi.org/10.1115/PVP2015-45070

Abstract

View Articletitled, J’s Disability Could Explain all the Test Specimen Size Effects Observed for the Fracture Toughness (<em>J</em><sub>c</sub>) of a Material in the DBTT Region

PDF

Topics: Fracture toughness , Stress , Fracture (Materials) , Failure , Size effect , Brittleness , Electromagnetic scattering , Finite element analysis , Phase transition temperature

Development of Test Guidance for Single Edge Notch Bend Fracture Toughness Specimens Containing Notches Instead of Fatigue Pre-Cracks

Anthony J. Horn, Peter J. Budden

PVP 2015; V06BT06A029doi:https://doi.org/10.1115/PVP2015-45474

Abstract

View Articletitled, Development of Test Guidance for Single Edge Notch Bend Fracture Toughness Specimens Containing Notches Instead of Fatigue Pre-Cracks

PDF

Topics: Fatigue , Fracture (Materials) , Fracture toughness , ASTM International , Damage , Fatigue cracks , Finite element analysis , Porosity , Testing

Deformation Characteristics of a High Chromium, Power Plant Steel at Elevated Temperatures

Brian J. Golden, Dong-Feng Li, Peter Tiernan, Stephen Scully, Noel P. O’Dowd

PVP 2015; V06BT06A030doi:https://doi.org/10.1115/PVP2015-45487

Abstract

View Articletitled, Deformation Characteristics of a High Chromium, Power Plant Steel at Elevated Temperatures

PDF

Topics: Deformation , Power stations , Steel , Temperature , Electron backscatter diffraction , Failure , Modeling , Crystals , Energetics , Energy generation

Effect of High Temperature Corrosion on the Service Life of P91 Piping in Biomass Co-Firing

C. P. O’Hagan, R. A. Barrett, S. B. Leen, R. F. D. Monaghan

PVP 2015; V06BT06A031doi:https://doi.org/10.1115/PVP2015-45612

Abstract

View Articletitled, Effect of High Temperature Corrosion on the Service Life of P91 Piping in Biomass Co-Firing

PDF

Topics: Biomass , Co-firing , Corrosion , High temperature , Pipes , Service life (Equipment) , Creep , Carbon , Damage , Finite element analysis

Effects of Side Groove on Fracture Toughness

Ho-Wan Ryu, Hune-Tae Kim, Jae-Jun Han, Yun-Jae Kim, Jong-Sung Kim, Myung-Rak Choi, Jin-Weon Kim

PVP 2015; V06BT06A032doi:https://doi.org/10.1115/PVP2015-45731

Abstract

View Articletitled, Effects of Side Groove on Fracture Toughness

PDF

Topics: Alloy steel , Damage , Failure , Finite element methods , Fracture (Materials) , Fracture (Process) , Fracture toughness , Pipes , Shapes , Simulation

Fracture Mechanics Study on the Effects of Various Notch Radii by Using FE Analysis

Zalikha Murni Abdul Hamid, Keun-Hyung Bae, Gyo-Geun Youn, Dae-Young Lee, Yun-Jae Kim, Masayuki Kamaya

PVP 2015; V06BT06A033doi:https://doi.org/10.1115/PVP2015-45749

Abstract

View Articletitled, Fracture Mechanics Study on the Effects of Various Notch Radii by Using FE Analysis

PDF

Topics: Finite element analysis , Fracture mechanics , Fracture toughness , Crack propagation , Damage , Deformation , Ductile fracture , Fracture (Materials) , Fracture (Process) , Plane strain

Rousselier Parameter Calibration for Esshete Weld Metal

Sutham Arun, Andrew H. Sherry, Mohammad Sheikh, Mike C. Smith

PVP 2015; V06BT06A034doi:https://doi.org/10.1115/PVP2015-45869

Abstract

View Articletitled, Rousselier Parameter Calibration for Esshete Weld Metal

PDF

Topics: Calibration , Metals , Damage , Fracture (Materials) , Fracture toughness , Computer simulation , Displacement , Ductile fracture , Failure mechanisms , Stress

A Monte Carlo Implementation of the James-Ford-Jivkov Micro-Structurally Informed Local Approach Applied to Predict Fracture Toughness Including Low Constraint Conditions

Michael Ford, Peter James

PVP 2015; V06BT06A035doi:https://doi.org/10.1115/PVP2015-45905

Abstract

View Articletitled, A Monte Carlo Implementation of the James-Ford-Jivkov Micro-Structurally Informed Local Approach Applied to Predict Fracture Toughness Including Low Constraint Conditions

PDF

Topics: Fracture toughness , Failure , Accounting , Electromagnetic scattering , Fracture (Materials) , Irradiation (Radiation exposure) , Particulate matter , Plasticity , Steel , Temperature

A Method to Derive the JC Value of a 1T SE(B) Using Charpy Impact Energy in the Lower Ductile to Brittle Transition

Robin J. Smith, Andrew H. Sherry, Anthony J. Horn, Adam C. Bannister

PVP 2015; V06BT06A036doi:https://doi.org/10.1115/PVP2015-45922

Abstract

View Articletitled, A Method to Derive the JC Value of a 1T SE(B) Using Charpy Impact Energy in the Lower Ductile to Brittle Transition

PDF

Topics: Brittleness , Steel , Fracture (Materials) , Flow (Dynamics) , Fracture toughness , Notch testing , Phase transition temperature , Stress , Temperature

A Macro-Micro Model of Fusion Zone Microstructure Evolution in Mn-C Low-Alloy Steel Coupled With Thermal Stress Analysis

Komeil Kazemi, Andrei Artemev, Jianguo Zhou, John A. Goldak

PVP 2015; V06BT06A037doi:https://doi.org/10.1115/PVP2015-45994

Abstract

View Articletitled, A Macro-Micro Model of Fusion Zone Microstructure Evolution in Mn-C Low-Alloy Steel Coupled With Thermal Stress Analysis

PDF

Topics: Alloys , Steel , Thermal stresses , Temperature , Stress , Transients (Dynamics) , Boundary-value problems , Creep , Diffusion (Physics) , Fatigue

Pipeline Integrity

Use of Elastic Follow-Up to Study the Effect of Displacement Controlled Loading on Plastic Collapse Pressures for Circumferentially Cracked Pipes

Guiyi Wu, David J. Smith, Martyn J. Pavier

PVP 2015; V06BT06A038doi:https://doi.org/10.1115/PVP2015-45195

Abstract

View Articletitled, Use of Elastic Follow-Up to Study the Effect of Displacement Controlled Loading on Plastic Collapse Pressures for Circumferentially Cracked Pipes

PDF

Topics: Collapse , Displacement , Pipes , Stress , Fracture (Materials) , Boundary-value problems , Failure mechanisms , Finite element analysis , Pressure

Failure Analysis of Pipeline With Pore Defects

Yan Li, Jian Shuai, Yan Zhou, Kui Xu

PVP 2015; V06BT06A039doi:https://doi.org/10.1115/PVP2015-45351

Abstract

View Articletitled, Failure Analysis of Pipeline With Pore Defects

PDF

Topics: Failure analysis , Pipelines , Welding , Finite element analysis , Failure , Failure mechanisms , Load bearing capacity , Stress

Further Insights on the Relationship Between J and CTOD for SE(B) and SE(T) Specimens Including Ductile Crack Propagation

Diego F. B. Sarzosa, Claudio Ruggieri

PVP 2015; V06BT06A040doi:https://doi.org/10.1115/PVP2015-45672

Abstract

View Articletitled, Further Insights on the Relationship Between J and CTOD for SE(B) and SE(T) Specimens Including Ductile Crack Propagation

PDF

Topics: Ductile fracture , Fracture (Materials) , Deformation , Finite element analysis , Fracture toughness , Pipelines , Steel , American Petroleum Institute , ASTM International , Computation

A New Material Failure Criterion for Numerical Simulation of Burst Pressure of Corrosion Defects in Pipelines

Xian-Kui Zhu

PVP 2015; V06BT06A041doi:https://doi.org/10.1115/PVP2015-45713

Abstract

View Articletitled, A New Material Failure Criterion for Numerical Simulation of Burst Pressure of Corrosion Defects in Pipelines

PDF

Topics: Computer simulation , Corrosion , Failure , Pipelines , Pressure , Stress , Tensile strength , Finite element analysis , Design , Engineering simulation

Fracture Behavior of Pressurized Defective Pipes Subjected to Large Tensile Strains

Marcelo Paredes, Tomasz Wierzbicki

PVP 2015; V06BT06A042doi:https://doi.org/10.1115/PVP2015-45743

Abstract

View Articletitled, Fracture Behavior of Pressurized Defective Pipes Subjected to Large Tensile Strains

PDF

Topics: Fracture (Materials) , Pipes , Stress , Computation , Coulombs , Dimensions , Physics , Pressure

Simulation of Ductile Fracture in Pipeline Steels Under Varying Constraint Conditions Using Cohesive Zone Modeling

Shreya Parmar, Xin Wang, Bill (W. R.) Tyson, Su Xu

PVP 2015; V06BT06A043doi:https://doi.org/10.1115/PVP2015-45873

Abstract

View Articletitled, Simulation of Ductile Fracture in Pipeline Steels Under Varying Constraint Conditions Using Cohesive Zone Modeling

PDF

Topics: Ductile fracture , Modeling , Pipelines , Simulation , Steel , Fracture (Materials) , Stress , Finite element analysis , Boundary layers , Fracture toughness

“Live” Repair of Gas Pipeline With Deep Girth Weld Crack

Jens P. Tronskar, Rikard Törnqvist, Ong Hock Guan, William A. Bruce

PVP 2015; V06BT06A044doi:https://doi.org/10.1115/PVP2015-46005

Abstract

View Articletitled, “Live” Repair of Gas Pipeline With Deep Girth Weld Crack

PDF

Topics: Fracture (Materials) , Maintenance , Pipelines , Welding , Inspection , Pipes , Fracture mechanics , Risk , American Petroleum Institute , Chemistry

Plastic Pipe and Composite Systems

Effect of Loading History on Elastic Modulus of HDPE

P.-Y. Ben Jar

PVP 2015; V06BT06A045doi:https://doi.org/10.1115/PVP2015-45317

Abstract

View Articletitled, Effect of Loading History on Elastic Modulus of HDPE

PDF

Topics: Elastic moduli , Deformation , Damage , Tension , Creep , Density , Gages , Mechanical properties , Stress

Measurement of Environmental Stress Cracking Resistance (ESCR) Using Notch-Free Specimens

P.-Y. Ben Jar

PVP 2015; V06BT06A046doi:https://doi.org/10.1115/PVP2015-45318

Abstract

View Articletitled, Measurement of Environmental Stress Cracking Resistance (ESCR) Using Notch-Free Specimens

PDF

Topics: Cracking (Materials) , Fracture (Process) , Stress , ASTM International , Fracture (Materials) , Deformation , Necking

Mechanism of Slow Crack Growth in Polyethylene: A Finite Element Approach

Xiangpeng Luo, Jianfeng Shi, Jinyang Zheng

PVP 2015; V06BT06A047doi:https://doi.org/10.1115/PVP2015-45488

Abstract

View Articletitled, Mechanism of Slow Crack Growth in Polyethylene: A Finite Element Approach

PDF

Topics: Finite element analysis , Fracture (Materials) , Bulk solids , Constitutive equations , Failure , Damage , Failure mechanisms , Finite element methods , Finite element model , Fluid mechanics

Ultrasonic Evaluation of Inclusions and Surface-Breaking Defects in High Density Polyethylene (HDPE) Butt Fusion and Mitered Joints

Cliff Searfass, Jeffrey P. Milligan, Michael S. Lashley

PVP 2015; V06BT06A048doi:https://doi.org/10.1115/PVP2015-45680

Abstract

View Articletitled, Ultrasonic Evaluation of Inclusions and Surface-Breaking Defects in High Density Polyethylene (HDPE) Butt Fusion and Mitered Joints

PDF

Topics: Density , Computer simulation , Countermeasures , Temperature effects

Dependence of Bonding Temperature Conditions on Metal Thickness Effects in Bonded Dissimilar Materials

Masayoshi Tateno, Eiichiro Yokoi

PVP 2015; V06BT06A049doi:https://doi.org/10.1115/PVP2015-45822

Abstract

View Articletitled, Dependence of Bonding Temperature Conditions on Metal Thickness Effects in Bonded Dissimilar Materials

PDF

Topics: Bonding , Metals , Temperature , Ceramics , Stress , Composite materials , High temperature , Nickel , Silicon nitride ceramics , Tensile strength

Probabilistic Assessment of Failure

Development of the Extremely Low Probability of Rupture (xLPR) Version 2.0 Code

D. Rudland, C. Harrington, R. Dingreville

PVP 2015; V06BT06A050doi:https://doi.org/10.1115/PVP2015-45134

Abstract

View Articletitled, Development of the Extremely Low Probability of Rupture (xLPR) Version 2.0 Code

PDF

Topics: Probability , Rupture , Piping systems , Fracture (Process) , Fracture mechanics , Computer software , Electricity (Physics) , Leak-before-break , Maintenance , Pressure pipes

Failure Analysis on Abnormal Thinning of Elbows in the Economizer at Waste Heat Boiler System

Sheng-Hui Wang, Xiao-Ming Luo, Yu-Qing Yang, Jian Tang, Zhen-Guo Yang

PVP 2015; V06BT06A051doi:https://doi.org/10.1115/PVP2015-45251

Abstract

View Articletitled, Failure Analysis on Abnormal Thinning of Elbows in the Economizer at Waste Heat Boiler System

PDF

Topics: Failure analysis , Pressure vessel systems , Waste heat , Corrosion , Countermeasures , Failure

A Probabilistic Life, Damage, and Uncertainty Assessment Method for Engineering Components and Systems

Zhigang Wei, Limin Luo, Litang Guo, Shengbin (Burt) Lin

PVP 2015; V06BT06A052doi:https://doi.org/10.1115/PVP2015-45908

Abstract

View Articletitled, A Probabilistic Life, Damage, and Uncertainty Assessment Method for Engineering Components and Systems

PDF

Topics: Damage , Uncertainty , Durability , Reliability , Damage assessment , Design , Fatigue failure , Fatigue life , Statistical mechanics , Uncertainty analysis

A Bayesian Statistics Based Design Curve Construction Method for Test Data With Extremely Small Sample Sizes

Zhigang Wei, Limin Luo, Fulun Yang, Robert Rebandt

PVP 2015; V06BT06A053doi:https://doi.org/10.1115/PVP2015-45909

Abstract

View Articletitled, A Bayesian Statistics Based Design Curve Construction Method for Test Data With Extremely Small Sample Sizes

PDF

Topics: Construction , Design , Statistics , Finite element analysis , Cycles , Failure , Stress , Algorithms , Durability , Engineering standards

Size and Statistical Effects on Degradation and Failure

Statistical Performance Evaluation of Spring Operated Pressure Relief Valve Reliability Improvements 2004 to 2014

Holly L. Watson, Robert E. Gross, Stephen P. Harris

PVP 2015; V06BT06A054doi:https://doi.org/10.1115/PVP2015-45135

Abstract

View Articletitled, Statistical Performance Evaluation of Spring Operated Pressure Relief Valve Reliability Improvements 2004 to 2014

PDF

Topics: Performance evaluation , Reliability , Relief valves , Springs , Valves , Failure , Commercial air transport , Maintenance , Probability , Risk-based inspection

Influence of Specimen Geometry and Strain Rate on Ductile-Brittle Transition Characterisation of Reactor Pressure Vessel Steels Using the Small Punch Technique

Jack Adams, Roger C. Hurst, J. Bryan Borradaile, Martin R. Bache

PVP 2015; V06BT06A055doi:https://doi.org/10.1115/PVP2015-45373

Abstract

View Articletitled, Influence of Specimen Geometry and Strain Rate on Ductile-Brittle Transition Characterisation of Reactor Pressure Vessel Steels Using the Small Punch Technique

PDF

Topics: Ductile-brittle transition , Geometry , Reactor vessels , Steel , Fracture (Materials) , Fracture (Process) , Testing , Active materials , Cylinders , Fractography

Effects of Seat Width on Development of Adhesions in Stainless Steel Trim Spring Operated Pressure Relief Valves

Julia V. Bukowski, Robert E. Gross, William M. Goble, Stephen P. Harris

PVP 2015; V06BT06A056doi:https://doi.org/10.1115/PVP2015-45755

Abstract

View Articletitled, Effects of Seat Width on Development of Adhesions in Stainless Steel Trim Spring Operated Pressure Relief Valves

PDF

Topics: Relief valves , Springs , Stainless steel , Disks , Fluids , Pressure , Safety , Valves

Tertiary-Type Creep in Setting Time-Dependent Allowable Stresses

Microstructural Characterization of Alloy 617 Crept Into the Tertiary Regime

Thomas M. Lillo, Richard N. Wright

PVP 2015; V06BT06A057doi:https://doi.org/10.1115/PVP2015-45055

Abstract

View Articletitled, Microstructural Characterization of Alloy 617 Crept Into the Tertiary Regime

PDF

Topics: Alloys , Creep , Dislocations , Gages , Grain boundaries , Indium alloys , Porosity , Stress , Temperature

Evaluation of Creep Deformation Property of Grade 91 Steels

Kazuhiro Kimura, Kota Sawada, Hideaki Kushima

PVP 2015; V06BT06A058doi:https://doi.org/10.1115/PVP2015-45405

Abstract

View Articletitled, Evaluation of Creep Deformation Property of Grade 91 Steels

PDF

Topics: Creep , Steel , Rupture , Heat , Stress , Temperature , Nickel

The Significance of the Tertiary Creep Criterion in Setting Time-Dependent Allowable Stresses

Robert Swindeman, Weiju Ren, Michael J. Swindeman

PVP 2015; V06BT06A059doi:https://doi.org/10.1115/PVP2015-45981

Abstract

View Articletitled, The Significance of the Tertiary Creep Criterion in Setting Time-Dependent Allowable Stresses

PDF

Topics: Creep , Stress , Rupture , Alloys , Databases , Electromagnetic scattering , Temperature

The Effect of Tertiary Creep on Allowable Stress Values for Type 304 and 316 Stainless Steel for Elevated Temperature Nuclear Component Design

Mainak Sengupta, J. E. Nestell

PVP 2015; V06BT06A060doi:https://doi.org/10.1115/PVP2015-45992

Abstract

View Articletitled, The Effect of Tertiary Creep on Allowable Stress Values for Type 304 and 316 Stainless Steel for Elevated Temperature Nuclear Component Design

PDF

Topics: Creep , Design , Stainless steel , Stress , Temperature , High temperature , Construction , Nuclear power stations , Rupture

Allowable Stress Criteria Based on the Onset of Third Stage Creep: An Historical Perspective

Robert Jetter, J. E. Nestell, Mainak Sengupta

PVP 2015; V06BT06A061doi:https://doi.org/10.1115/PVP2015-46004

Abstract

View Articletitled, Allowable Stress Criteria Based on the Onset of Third Stage Creep: An Historical Perspective

PDF

Topics: Creep , Stress , Rupture , Temperature , Design , Failure , Fracture (Materials) , Leakage , Nozzles

Welding Residual Stress and Distortion Simulation and Measurement

Evaluation of Residual Stresses Induced by Repairs to Small Diameter Stainless Steel Pipe Welds

Trevor G. Hicks, William R. Mabe, Jason R. Miller, John V. Mullen

PVP 2015; V06BT06A062doi:https://doi.org/10.1115/PVP2015-45139

Abstract

View Articletitled, Evaluation of Residual Stresses Induced by Repairs to Small Diameter Stainless Steel Pipe Welds

PDF

Topics: Maintenance , Pipes , Residual stresses , Stainless steel , Welded joints , Manufacturing , Modeling , Cracking (Materials) , Experimental methods , Finite element analysis

Residual Stresses in Clad Nuclear Reactor Pressure Vessel Steels: Prediction, Measurement and Reconstruction

Karim Serasli, Harry Coules, David Smith

PVP 2015; V06BT06A063doi:https://doi.org/10.1115/PVP2015-45224

Abstract

View Articletitled, Residual Stresses in Clad Nuclear Reactor Pressure Vessel Steels: Prediction, Measurement and Reconstruction

PDF

Topics: Nuclear reactors , Pressure vessels , Residual stresses , Steel , Stress , Engineering simulation , Finite element analysis , Simulation , Performance , Welding

Estimation of Stress-Free State From Hardness Ratio for Evaluation of Residual Stress Using Instrumented Indentation Testing (IIT)

Jong-Hyoung Kim, Hee-Jun Ahn, Seung-Won Jeon, June Sang Lee, Min-Jae Choi, Kwang-Ho Kim, Dongseong Ro, Dongil Kwon

PVP 2015; V06BT06A064doi:https://doi.org/10.1115/PVP2015-45529

Abstract

View Articletitled, Estimation of Stress-Free State From Hardness Ratio for Evaluation of Residual Stress Using Instrumented Indentation Testing (IIT)

PDF

Topics: Stress , Testing , Welding , Welded joints , Chain , Cutting , Drilling , Failure , Fracture (Materials) , Fracture (Process)

A Method to Define the Best Weld Sequence Using a Limited Number of Welding Simulation Analysis

Mahyar Asadi, Ghazi Alsoruji

PVP 2015; V06BT06A065doi:https://doi.org/10.1115/PVP2015-45556

Abstract

View Articletitled, A Method to Define the Best Weld Sequence Using a Limited Number of Welding Simulation Analysis

PDF

Topics: Simulation analysis , Welding , Design , Simulation models , Algorithms , Approximation , Finite element methods , Finite element model , Modeling , Optimization

Phase 2b Weld Residual Stress Round Robin: Mockup Design and Comparisons of Measurement and Simulation Results

Michael L. Benson, Minh N. Tran, Michael R. Hill

PVP 2015; V06BT06A066doi:https://doi.org/10.1115/PVP2015-45636

Abstract

View Articletitled, Phase 2b Weld Residual Stress Round Robin: Mockup Design and Comparisons of Measurement and Simulation Results

PDF

Topics: Design , Simulation results , Stress , Modeling , Drilling , Electricity (Physics) , Finite element analysis , Surges , Uncertainty

Development of Residual Stress Simulation and Experimental Measurement Tools for Stainless Steel Pressure Vessels

Thomas B. Reynolds, Arthur A. Brown, Lauren L. Beghini, Timothy D. Kostka, Chris W. San Marchi

PVP 2015; V06BT06A067doi:https://doi.org/10.1115/PVP2015-45655

Abstract

View Articletitled, Development of Residual Stress Simulation and Experimental Measurement Tools for Stainless Steel Pressure Vessels

PDF

Topics: Pressure vessels , Simulation , Stainless steel , Stress , Residual stresses , Fatigue , Forgings (Products) , Fracture toughness , Manufacturing , Thermomechanics

Analysis of Residual Stresses in Pipe Seam Welds and a Proposed Residual Stress Profile Estimation Method

Shaopin Song, Pingsha Dong

PVP 2015; V06BT06A068doi:https://doi.org/10.1115/PVP2015-45726

Abstract

View Articletitled, Analysis of Residual Stresses in Pipe Seam Welds and a Proposed Residual Stress Profile Estimation Method

PDF

Topics: Pipes , Residual stresses , Stress , Welded joints , Wall thickness , Density , Engineering standards , Fitness-for-service , Heat , Heating

Numerical Analysis of Weld Residual Stress in a Pressurizer Surge Nozzle Full-Scale Mockup: The Effect of Hardening Constitutive Model and Interpass Temperature

Minh N. Tran, Ondrej Muránsky, Michael R. Hill, Mitchell D. Olson

PVP 2015; V06BT06A069doi:https://doi.org/10.1115/PVP2015-45744

Abstract

View Articletitled, Numerical Analysis of Weld Residual Stress in a Pressurizer Surge Nozzle Full-Scale Mockup: The Effect of Hardening Constitutive Model and Interpass Temperature

PDF

Topics: Constitutive equations , Hardening , Nozzles , Numerical analysis , Stress , Surges , Temperature , Modeling , Finite element analysis , Thermal analysis

An Analytical Method for Estimating Welding-Induced Plastic Zone Size for Residual Stress Profile Development

Xianjun Pei, Shaopin Song, Pingsha Dong

PVP 2015; V06BT06A070doi:https://doi.org/10.1115/PVP2015-45750

Abstract

View Articletitled, An Analytical Method for Estimating Welding-Induced Plastic Zone Size for Residual Stress Profile Development

PDF

Topics: Stress , Welding , Finite element analysis , Heat transfer , Stress analysis (Engineering) , Temperature , Construction , Fitness-for-service , Heating and cooling , Melting

Further Comments on Validation Approaches for Weld Residual Stress Simulation

Minh N. Tran, Michael R. Hill, Mitchell D. Olson

PVP 2015; V06BT06A071doi:https://doi.org/10.1115/PVP2015-45751

Abstract

View Articletitled, Further Comments on Validation Approaches for Weld Residual Stress Simulation

PDF

Topics: Simulation , Stress , Modeling , Circuits , Cooling , Electricity (Physics) , Fracture (Materials) , Metals , Pressure vessels , Pressurized water reactors

An Analytical Interpretation of Welding Linear Heat Input for 2D Residual Stress Models

Shaopin Song, Xianjun Pei, Pingsha Dong

PVP 2015; V06BT06A072doi:https://doi.org/10.1115/PVP2015-45753

Abstract

View Articletitled, An Analytical Interpretation of Welding Linear Heat Input for 2D Residual Stress Models

PDF

Topics: Heat , Stress , Welding , Temperature , Modeling , Welded joints , Finite element analysis , Fitness-for-service , Flow (Dynamics) , Heat losses

High-Temperature Deformation Constitutive Law for Dissimilar Weld Residual Stress Modeling: Effect of Thermal Load on Strain Hardening

Xinghua Yu, Paul Crooker, Yanli Wang, Zhili Feng

PVP 2015; V06BT06A073doi:https://doi.org/10.1115/PVP2015-45776

Abstract

View Articletitled, High-Temperature Deformation Constitutive Law for Dissimilar Weld Residual Stress Modeling: Effect of Thermal Load on Strain Hardening

PDF

Topics: Constitutive equations , Deformation , High temperature , Modeling , Stress , Work hardening , Temperature , Recrystallization , Alloys , Flow (Dynamics)

Weld Residual Stress (WRS) Modeling of Layered Pressure Vessels (LPV) and Fracture Assessment

F. W. Brust, E. Punch, E. Kurth

PVP 2015; V06BT06A074doi:https://doi.org/10.1115/PVP2015-45784

Abstract

View Articletitled, Weld Residual Stress (WRS) Modeling of Layered Pressure Vessels (LPV) and Fracture Assessment

PDF

Topics: Fracture (Materials) , Fracture (Process) , Modeling , Pressure vessels , Stress , Shells , Diluents , American Petroleum Institute , Construction , Finite element analysis

Part Repair and Start/Stop Effects and Three Dimensional Residual Stress in Dissimilar Metal Welds

F. W. Brust, E. Punch, E. Kurth

PVP 2015; V06BT06A075doi:https://doi.org/10.1115/PVP2015-45785

Abstract

View Articletitled, Part Repair and Start/Stop Effects and Three Dimensional Residual Stress in Dissimilar Metal Welds

PDF

Topics: Maintenance , Metals , Stress , Welded joints , Dimensional analysis , Manufacturing , Alloys , Carbon steel , Failure , Fillers (Materials)

A Review of the NeT TG4 International Weld Residual Stress Benchmark

Mike C. Smith, Ann Smith, Carsten Ohms, Robert Wimpory

PVP 2015; V06BT06A076doi:https://doi.org/10.1115/PVP2015-45801

Abstract

View Articletitled, A Review of the NeT TG4 International Weld Residual Stress Benchmark

PDF

Topics: Residual stresses , Steel , Stress

Standardized Through-Wall Distributions of Dissimilar Metal Weld Residual Stress

John E. Broussard, III

PVP 2015; V06BT06A077doi:https://doi.org/10.1115/PVP2015-45950

Abstract

View Articletitled, Standardized Through-Wall Distributions of Dissimilar Metal Weld Residual Stress

PDF

Topics: Metals , Stress , Welded joints , Fracture (Materials) , Welding , Residual stresses , Stress concentration , Uncertainty , Alloys , ASME Standards