Skip Nav Destination
Proceedings Papers
In This Volume
Volume 3: Design and Analysis
Design and Analysis
CFD in Design and Analysis
Numerical Analysis and Experimental Assessment of the Cylinder Temperature in a Reciprocating Compressor
PVP 2015; V003T03A002https://doi.org/10.1115/PVP2015-45574
Topics:
Compressors
,
Cylinders
,
Numerical analysis
,
Temperature
,
Simulation
,
Heat transfer
,
Water
,
Circuits
,
Computation
,
Coolants
Design and Analysis of Bolted Joints
Development and Use of the Risk-Based Joint Integrity (RBJI) Assessment Methodology
PVP 2015; V003T03A004https://doi.org/10.1115/PVP2015-45896
Topics:
Risk
,
Leakage
,
Failure
,
Manufacturing
,
Bolted joints
,
Design
,
Heat exchangers
,
Maintenance
,
Piping systems
,
Pressure
The Effect of Bolt Size on the Assembly Nut Factor
PVP 2015; V003T03A005https://doi.org/10.1115/PVP2015-45945
Topics:
ASTM International
,
Manufacturing
,
Quality control
,
Stainless steel
,
Testing
Design and Analysis of Composite Materials and Structures
Progressive Damage Analysis of Full-Wrapped Composite Gas Cylinder Under Overload Condition and Prediction of Its Bursting Pressure
PVP 2015; V003T03A007https://doi.org/10.1115/PVP2015-45269
Topics:
Composite materials
,
Damage
,
Gas cylinders
,
Pressure
,
Computer simulation
,
Anisotropy
,
Elastic moduli
,
Failure
,
Failure analysis
,
Failure mechanisms
Design of Cross Ties in Steel Plate Concrete Structures
PVP 2015; V003T03A008https://doi.org/10.1115/PVP2015-45310
Topics:
Concretes
,
Design
,
Steel
,
Shear (Mechanics)
,
Reinforced concrete
,
Bending (Stress)
,
Concrete beams
,
Design methodology
,
Ductility
Low-Velocity Impact Analysis of a Stiffened Composite Panel
PVP 2015; V003T03A009https://doi.org/10.1115/PVP2015-45727
Topics:
Composite materials
,
Damage
,
Design
,
Simulation
,
Collapse
,
Compression
,
Projectiles
,
Sensitivity analysis
,
Stress
,
Structural elements (Construction)
Design and Analysis of Piping and Components
Effects of High Frequency Hydrodynamic Loads on Structural Integrity and Mechanical Operability of Valves
PVP 2015; V003T03A012https://doi.org/10.1115/PVP2015-45008
Topics:
Stress
,
Valves
,
Damage
,
Piping systems
,
Actuators
,
Cycles
,
Design
,
Dynamic testing (Materials)
,
Earthquakes
,
Finite element analysis
Study on Limit Load of Double Pipe Bend Combined Fittings
PVP 2015; V003T03A013https://doi.org/10.1115/PVP2015-45124
Topics:
Fittings
,
Pipe bends
,
Stress
,
Pipes
,
Finite element analysis
,
Finite element methods
,
Geometry
,
Pipeline systems
,
Piping systems
,
Pressure
Structural Assessment of Main Steam Line and Containment Building Under Steam Explosion Conditions
PVP 2015; V003T03A014https://doi.org/10.1115/PVP2015-45169
Topics:
Containment buildings
,
Explosions
,
Steam
,
Failure
,
Stress
,
Boilers
,
Cavities
,
Concretes
,
Containment
,
Coolants
Mechanical and SCC Behavior of an API5L Steel Casing Within the Context of Deep Geological Repositories for Radioactive Waste
PVP 2015; V003T03A015https://doi.org/10.1115/PVP2015-45234
Topics:
Radioactive wastes
,
Steel
,
Corrosion
,
Rocks
,
Stress
,
Anisotropy
,
Carbon dioxide
,
Plasticity
,
Reliability
,
Risk
B31.1 Compliant Design of CFRP Buried Piping Systems
PVP 2015; V003T03A016https://doi.org/10.1115/PVP2015-45284
Topics:
Carbon reinforced plastics
,
Design
,
Piping systems
,
Pipes
,
Maintenance
,
Composite materials
,
Pipelines
,
Pressure
,
Safety
,
Stress
Development of a Method to Assess Impact Hazards
PVP 2015; V003T03A018https://doi.org/10.1115/PVP2015-45489
Topics:
Accidents
,
Circuits
,
Containment
,
Coolants
,
Damage
,
Failure
,
Hazards
,
Hydrodynamics
,
Jets
,
Missiles
Stress Analysis and Optimum Design of the Heat Transport System at Molten Salt Reactor
PVP 2015; V003T03A019https://doi.org/10.1115/PVP2015-45519
Topics:
Design
,
Heat
,
Molten salt reactors
,
Stress analysis (Engineering)
,
Pipes
,
Flexible systems
,
Heat exchangers
,
High temperature
,
Pipelines
,
Pumps
A Study of the Surface Penetration of High Cycle Thermal Loading in Pressure Retaining Components
PVP 2015; V003T03A020https://doi.org/10.1115/PVP2015-45543
Topics:
Cycles
,
Pressure
,
Design
,
Fatigue life
,
Fluids
,
Nondestructive evaluation
,
Temperature
,
Flow (Dynamics)
,
Heat transfer
,
In-service inspection
Further Tests on Pipe Elements in Commercial Software for Nuclear Power Piping Analysis
PVP 2015; V003T03A022https://doi.org/10.1115/PVP2015-45548
Topics:
Computer software
,
Nuclear power
,
Pipes
,
Computation
,
Pipe bends
,
Stress
,
Deformation
,
Finite element analysis
,
Piping systems
,
Reliability
Acoustic Vibration Induced Fatigue in Pipe Joints
PVP 2015; V003T03A024https://doi.org/10.1115/PVP2015-45799
Topics:
Acoustics
,
Fatigue
,
Pipe joints
,
Vibration
,
Junctions
,
Pipes
,
Shells
,
Dynamic response
,
Fatigue failure
,
Finite element analysis
Design and Analysis of Pressure Vessels, Heat Exchangers, and Components
The Effect of Nozzles and Nozzle Loadings on Shell Buckling
PVP 2015; V003T03A027https://doi.org/10.1115/PVP2015-45090
Topics:
Buckling
,
Nozzles
,
Shells
,
Vessels
,
External pressure
,
Stress
,
Design
,
Finite element analysis
,
Pipes
Stresses on Aluminum Brazed Plate Fin Heat Exchangers in a Floating Environment
PVP 2015; V003T03A028https://doi.org/10.1115/PVP2015-45223
Topics:
Aluminum
,
Heat exchangers
,
Stress
,
Fatigue
,
Ships
,
Endurance limit
,
Design
,
Cycles
,
Hull
,
Shells
Lateral Influence Coefficients for a Thin Conical Shell Frustum
PVP 2015; V003T03A029https://doi.org/10.1115/PVP2015-45298
Topics:
Shells
,
Computers
,
Wind
,
Finite element analysis
,
Fourier series
,
Geometry
,
Materials properties
,
Membranes
,
Separation (Technology)
,
Vessels
Modified Svensson’s Formula for More Accurate Burst Pressure Predictions of Thin Cylindrical Shells With Small Shell Length to Diameter Ratios
PVP 2015; V003T03A032https://doi.org/10.1115/PVP2015-45316
Topics:
Pipes
,
Pressure
,
Shells
,
Displacement
,
Explosions
,
Finite element analysis
,
Safety
,
Temperature
,
Vessels
Structure Design and Analysis of a Locking Band Type Quick Opening End Closure Using a New Saddle-Shaped Sealing Ring for Natural Gas Filters
PVP 2015; V003T03A034https://doi.org/10.1115/PVP2015-45449
Topics:
Design
,
Filters
,
Natural gas
,
Sealing (Process)
,
Rubber
,
Stress
,
Bearings
,
Doors
,
Engineering prototypes
,
Engineering standards
Design Development of a Vacuum Vessel With Detachable Top Lid Configuration
Jaydeep Joshi, Ashish Yadav, Roopesh Gangadharan, Mudalakeri Girish, Shino Ulahannan, Vinay Kumar Abbavaram Ramakrishna Reddy, Chandramouli Rotti, Mainak Bandyopadhyay, Arun Chakraborty
PVP 2015; V003T03A035https://doi.org/10.1115/PVP2015-45460
Topics:
Design
,
Vacuum
,
Vessels
,
Manufacturing
,
ASME Standards
,
Finite element analysis
,
Neutral beams
,
Test facilities
,
Deflection
,
Design methodology
Fatigue
Effect of Thermal Cutting Methods on the Fatigue Life of High Strength Structural Steel S690Q
PVP 2015; V003T03A037https://doi.org/10.1115/PVP2015-45174
Topics:
Cutting
,
Fatigue life
,
Structural steel
,
Fatigue
,
Fuels
,
Lasers
,
Plasmas (Ionized gases)
,
Cycles
,
Failure
,
Geometry
High Temperature Fatigue of Welded Joints: Experimental Investigation and Local Analysis of Butt Welded Flat and Cruciform Specimens
PVP 2015; V003T03A041https://doi.org/10.1115/PVP2015-45572
Topics:
Fatigue
,
High temperature
,
Welded joints
,
Hardening
,
Stress
,
Temperature
,
Chemical industry
,
Chemical properties
,
Fatigue failure
,
Fatigue life
Numerical Investigations of Seam Welds Under Low Cycle Fatigue: Proposal for Lifetime Estimation and Recommendations for Design With Commonly Used Guidelines
PVP 2015; V003T03A042https://doi.org/10.1115/PVP2015-45576
Topics:
Design
,
Low cycle fatigue
,
Welded joints
,
Cycles
,
Fatigue analysis
,
Damage
,
Failure
,
Fatigue
,
Finite element analysis
,
Geometry
High Temperature Low Cycle Fatigue Behaviour of MarBN at 600 °C
PVP 2015; V003T03A043https://doi.org/10.1115/PVP2015-45599
Topics:
High temperature
,
Low cycle fatigue
,
Fatigue
,
Creep
,
Temperature
,
Advanced materials
,
Boron
,
Energy generation
,
Fossil fuels
,
Martensitic steel
Accounting for Negative R-Ratio (Crack Closure) in Fatigue Crack Growth Calculations on Stainless Steel Components
PVP 2015; V003T03A045https://doi.org/10.1115/PVP2015-45622
Topics:
Accounting
,
Fatigue cracks
,
Fracture (Materials)
,
Stainless steel
,
Cycles
,
Stress
,
Engineering standards
,
Mechanical properties
Assessment of Bend Fatigue Tests Using RSE-M Stress Analysis Techniques and the ASME Section III Fatigue Design Rules
PVP 2015; V003T03A046https://doi.org/10.1115/PVP2015-45633
Topics:
Fatigue design
,
Fatigue testing
,
Stress analysis (Engineering)
,
Piping systems
,
Stress
,
Fatigue damage
,
Inspection
,
Damage
,
Failure mechanisms
,
Fatigue
Remaining Fatigue Life Time Assessment of Welded and Braced Side Branches
PVP 2015; V003T03A047https://doi.org/10.1115/PVP2015-45766
Topics:
Damage
,
Failure
,
Fatigue
,
Fatigue life
,
Finite element model
,
Fracture (Materials)
,
Fracture mechanics
,
High cycle fatigue
,
Inspection
,
Offshore installations
Demonstration of Fatigue for LTO License of NPP Borssele
PVP 2015; V003T03A048https://doi.org/10.1115/PVP2015-45791
Topics:
Fatigue
,
Licensing
,
Nuclear power stations
,
Cycles
,
Fatigue analysis
,
Safety
,
Temperature measurement
,
Transients (Dynamics)
,
Coolants
,
Monitoring systems
Fatigue Crack Initiation and Growth Observation for 316 Stainless Steel Subjected to Equi-Biaxial Cyclic Loading
PVP 2015; V003T03A049https://doi.org/10.1115/PVP2015-45814
Topics:
Fatigue cracks
,
Stainless steel
,
Stress
,
Fracture (Materials)
,
Fatigue damage
,
Fatigue
,
Fatigue testing
,
Cracking (Materials)
,
Design
,
Disks
Fitness for Service
Validity of Procedure for Plastic Collapse Assessment of a Local Thin Area Near Vessel and Nozzle Intersections Subjected to Internal Pressure and External Loadings
PVP 2015; V003T03A052https://doi.org/10.1115/PVP2015-45512
Topics:
Collapse
,
Nozzles
,
Pressure
,
Vessels
,
Fitness-for-service
,
Pipes
,
Finite element analysis
,
Numerical analysis
,
Pressure equipment
Procedure for Plastic Collapse Assessment of a Local Thin Area Near Vessel and Nozzle Intersections Subjected to Internal Pressure and External Loadings
PVP 2015; V003T03A053https://doi.org/10.1115/PVP2015-45538
Topics:
Collapse
,
Nozzles
,
Pressure
,
Vessels
,
Stress
,
Finite element analysis
,
Pipes
,
Pipe bends
Stress Intensification Factors for Non-Concentric Elbow Branches in Old Carbon-Steel Pipelines
PVP 2015; V003T03A054https://doi.org/10.1115/PVP2015-45541
Topics:
Carbon steel
,
Pipelines
,
Stress
,
Pipes
,
Ducts
,
Rotation
,
Finite element analysis
,
Geometry
,
Engineering standards
,
Fitness-for-service
ASME Section VIII Recertification of a 33,000 Gallon Vacuum-Jacketed LH2 Storage Vessel for Densified Hydrogen Testing at NASA Kennedy Space Center
PVP 2015; V003T03A055https://doi.org/10.1115/PVP2015-45625
Topics:
Hydrogen
,
NASA
,
Storage
,
Testing
,
Vacuum
,
Vessels
,
Pressure
,
Temperature
,
Design
,
ASME Boiler and Pressure Vessel Code
My Pipes Are Corroding! When Should I Repair? Getting the Answers You Need for Maintaining Pipeline Integrity
PVP 2015; V003T03A056https://doi.org/10.1115/PVP2015-45626
Topics:
Maintenance
,
Pipeline integrity
,
Pipes
,
Fitness-for-service
,
Finite element analysis
,
Corrosion
,
Geometry
,
Inspection
,
Mesh generation
,
Metals
Nonlinear FEA of a Corroded Pipe
PVP 2015; V003T03A057https://doi.org/10.1115/PVP2015-45734
Topics:
Finite element analysis
,
Pipes
,
Collapse
,
Stress
,
Pipelines
,
Sensitivity analysis
,
American Petroleum Institute
,
Buckling
,
Corrosion
,
Design
Fracture
Experimental and Numerical Study of Ductile Fracture Initiation in Aluminum 6061-T6
PVP 2015; V003T03A060https://doi.org/10.1115/PVP2015-45143
Topics:
Aluminum
,
Ductile fracture
,
Computer simulation
,
Damage
,
Tension
,
Alloys
,
Aluminum alloys
,
Ductility
,
Electromagnetic scattering
,
Fracture (Materials)
Estimation Method for Evaluating Energy Release Rate of Circumferential Through-Wall Cracks in Dissimilar Metal Welds
PVP 2015; V003T03A062https://doi.org/10.1115/PVP2015-45547
Topics:
Fracture (Materials)
,
Metals
,
Welded joints
,
Base metals
,
Materials properties
,
Numerical analysis
,
Stability
,
Strength (Materials)
,
Tension
Semi-Closed-Form Displacement Equations for Calculating J-R Curves From Pipe Fracture Experiments
PVP 2015; V003T03A065https://doi.org/10.1115/PVP2015-45571
Topics:
Displacement
,
Fracture (Materials)
,
Pipes
,
Finite element analysis
,
Base metals
,
Fracture toughness
,
Metals
,
Pipe bends
,
Stress
,
Stress-strain curves
Validation of Linear Elastic Fracture Mechanics in Predicting the Fracture Toughness of Polyethylene Pipe Materials
PVP 2015; V003T03A066https://doi.org/10.1115/PVP2015-45651
Topics:
Fracture mechanics
,
Fracture toughness
,
Polyethylene pipes
,
Pipes
,
Density
,
Fracture (Materials)
,
Fracture (Process)
,
Junctions
,
Natural gas
,
Piping systems
Crack Growth Behavior of Pipes Made From Polyvinyl Chloride Pipe Material
PVP 2015; V003T03A067https://doi.org/10.1115/PVP2015-45657
Topics:
Fracture (Materials)
,
Pipes
,
Polyvinyl chloride pipes
,
Fracture toughness
,
Tension
,
Dimensions
,
Failure
,
Plane strain
,
Brittleness
,
Cutting
Methodological Features of WWER RPV Metal Critical Temperature of Brittleness Prediction on the Base of the Data Scatter and the Chemical Composition
PVP 2015; V003T03A068https://doi.org/10.1115/PVP2015-45679
Topics:
Brittleness
,
Electromagnetic scattering
,
Metals
,
Temperature
,
Radiation (Physics)
,
Welded joints
,
Surveillance
,
Brittle fracture
,
Databases
,
Embrittlement
Limit Load Solution and Crack Driving Force Estimation Scheme for Embedded Flaws in Pipeline Girth Welds
PVP 2015; V003T03A069https://doi.org/10.1115/PVP2015-45702
Topics:
Fracture (Materials)
,
Pipelines
,
Stress
,
Welded joints
,
Underwater pipelines
,
Cable reels
,
Collapse
,
Finite element analysis
,
Manufacturing
,
Ocean engineering
Inelastic, Nonlinear, and Limit Load Analysis
Effects of Local Wall Thinning With Crack on Limit Loads for Pipes Subject to Combined Pressure and Bending
PVP 2015; V003T03A070https://doi.org/10.1115/PVP2015-45016
Topics:
Fracture (Materials)
,
Pipes
,
Pressure
,
Stress
,
Collapse
,
Corrosion
,
Finite element analysis
,
Piping systems
,
Cylinders
,
Erosion
The Effect of the Size and Orientation of Corrosion Damage on the Residual Strength of Steel Pipes: Analytical Validation of a Numerical Model
PVP 2015; V003T03A072https://doi.org/10.1115/PVP2015-45537
Topics:
Computer simulation
,
Corrosion
,
Damage
,
Pipes
,
Steel
,
Pipelines
,
Failure
,
Finite element analysis
,
Rupture
,
Structural elements (Construction)
A Probability-Based Leak-Before-Break Application for Small Modular Reactors
PVP 2015; V003T03A073https://doi.org/10.1115/PVP2015-45724
Topics:
Leak-before-break
,
Probability
,
Small modular reactors
,
Pipes
,
Rupture
,
Design
,
Fracture (Materials)
,
Piping systems
,
Dimensions
,
Fluids
Finite Element Analysis of Cyclically-Loaded Steel Pipes During Deep Water Reeling Installation
PVP 2015; V003T03A075https://doi.org/10.1115/PVP2015-45771
Topics:
Finite element analysis
,
Pipes
,
Steel
,
Water
,
Advanced materials
,
Deformation
,
External pressure
,
Residual stresses
,
Underwater pipelines
Stress Classification and Design by Analysis Methodologies
A Comparison of Design by Analysis Techniques for Evaluating Nozzle-to-Shell Junctions per ASME Section VIII Division 2
PVP 2015; V003T03A076https://doi.org/10.1115/PVP2015-45408
Topics:
Design
,
Junctions
,
Nozzles
,
Shells
,
Stress
,
Collapse
,
Stress analysis (Engineering)
,
Failure
,
Failure mechanisms
,
Finite element analysis
An Application of Two Step Stress Classification Approach (Primary Structure Method) for Stress Classification at Cylindrical Shell–Nozzle Intersections Subjected to Internal Pressure, Radial Load and In- and Out-of-Plane Bending Moments
PVP 2015; V003T03A077https://doi.org/10.1115/PVP2015-45533
Topics:
Nozzles
,
Pipes
,
Pressure
,
Stress
,
Shells
,
Bending (Stress)
,
Deformation
,
Membranes
,
Engineers
,
Equilibrium (Physics)
Thermal Stresses and Elevated Temperature Design
A Joint Research Project to the Control of Rapid Temperature Changes in Industrial Components
PVP 2015; V003T03A078https://doi.org/10.1115/PVP2015-45282
Topics:
Temperature
,
Thermal power stations
,
Damage
,
Databases
,
Fatigue cracks
,
Fracture mechanics
,
High temperature
,
Simulation
,
Steel
,
Ultrasonic measurement
Creep Simulation of the Hydroprocessing Reactor Using a Physically-Based CDM Model
PVP 2015; V003T03A080https://doi.org/10.1115/PVP2015-45416
Topics:
Creep
,
Simulation
,
Design
,
Damage
,
Constitutive equations
,
Damage mechanics
,
Failure
,
Failure mechanisms
,
Finite element analysis
,
Genetic algorithms
High Temperature, Multi-Material, Cyclic Plasticity of a P91 Welded Branch-Header Connection Under Cyclic Pressure
PVP 2015; V003T03A081https://doi.org/10.1115/PVP2015-45605
Topics:
High temperature
,
Plasticity
,
Pressure
,
Metals
,
Heat
,
Low cycle fatigue
,
Combined cycle gas turbines
,
Failure
,
Finite element model
,
Geometry
A Unified Viscoplastic Model for Creep and Fatigue-Creep Response Simulation of Haynes 230
PVP 2015; V003T03A082https://doi.org/10.1115/PVP2015-45671
Topics:
Creep
,
Fatigue
,
Simulation
,
Constitutive equations
,
Stress
,
Damage
,
Modeling
,
Flow (Dynamics)
,
Hardening
,
Kinematics