Skip Nav Destination
Proceedings Papers
In This Volume
Volume 3: Design and Analysis
Design and Analysis
Acoustic Induced Vibration in Piping Systems
Acoustic Fatigue Evaluation of Branch Connections
PVP 2014; V003T03A001https://doi.org/10.1115/PVP2014-28140
Topics:
Acoustics
,
Fatigue
,
Damage
,
Vibration
,
Pipes
,
Excitation
,
Fatigue failure
,
Finite element analysis
,
Fittings
,
Sound pressure
Strain Based AIV Evaluation
PVP 2014; V003T03A002https://doi.org/10.1115/PVP2014-28260
Topics:
Acoustics
,
Aerodynamic noise
,
ASME Boiler and Pressure Vessel Code
,
Design
,
Fatigue
,
Noise (Sound)
,
Pipes
,
Structural response analysis
,
Testing
,
Valves
Study of Acoustic Vibration in Piping Systems by Energy-Based Finite Element Analysis
PVP 2014; V003T03A003https://doi.org/10.1115/PVP2014-28303
Topics:
Acoustics
,
Finite element analysis
,
Piping systems
,
Vibration
,
Pipes
,
Seas
,
Excitation
,
Flow (Dynamics)
,
Fluids
Difficulties in Predicting Cycles of Failure Using Finite Element Analysis of Acoustically Induced Vibration (AIV) Problems in Piping Systems
PVP 2014; V003T03A004https://doi.org/10.1115/PVP2014-28325
Topics:
Acoustics
,
Cycles
,
Failure
,
Finite element analysis
,
Piping systems
,
Vibration
,
Pipes
,
Excitation
,
Stress
,
Fatigue strength
Investigation of Characteristic of Flow Induced Vibration Caused by Turbulence Relating to Acoustically Induced Vibration
PVP 2014; V003T03A005https://doi.org/10.1115/PVP2014-28600
Topics:
Acoustics
,
Flow-induced vibrations
,
Turbulence
,
Vibration
,
Pipes
,
Failure
,
Flow (Dynamics)
,
Fluids
,
High pressure (Physics)
,
Noise (Sound)
Measurement of High Amplitude Relief Valve Noise for Acoustically Induced Vibration and Comparison to Predictive Methods
PVP 2014; V003T03A006https://doi.org/10.1115/PVP2014-28794
Topics:
Acoustics
,
Noise (Sound)
,
Relief valves
,
Vibration
,
Design
,
Excitation
,
Failure
,
Flow (Dynamics)
,
Nitrogen
,
Physics
CFD in Design and Analysis
Numerical Estimation of Flow Penetrating Depth Into Stagnant Branch Pipes for Thermal Fatigue Prediction
PVP 2014; V003T03A007https://doi.org/10.1115/PVP2014-28382
Topics:
Fatigue
,
Flow (Dynamics)
,
Pipes
,
Thermal stratification
,
Temperature
,
Water
,
Thermal stresses
,
High temperature
,
Boundary layers
,
Cavity flows
Main Steam Line Break Loads on BWR and ABWR Steam Dryer
PVP 2014; V003T03A008https://doi.org/10.1115/PVP2014-28437
Topics:
Boiling water reactors
,
Steam
,
Stress
,
Waves
,
Acoustics
,
Sound pressure
,
Compression
,
Computation
,
Computational fluid dynamics
,
Fluids
Reciprocating Compressor Cylinder’s Cooling: A Numerical Approach Using CFD With Conjugate Heat Transfer
PVP 2014; V003T03A009https://doi.org/10.1115/PVP2014-28702
Topics:
Compressors
,
Computational fluid dynamics
,
Cooling
,
Heat transfer
,
Circuits
,
Compression
,
Cylinders
,
Metals
,
Water
,
Boundary-value problems
Composite Materials and Structures
Global-Local Analysis of a Composite Riser
PVP 2014; V003T03A010https://doi.org/10.1115/PVP2014-28054
Design-by-Analysis Methods for Asymmetric or Unbalanced Cylindrical Composite Pressure Vessels
PVP 2014; V003T03A011https://doi.org/10.1115/PVP2014-28130
Topics:
Composite materials
,
Design
,
Pressure vessels
,
Laminates
,
Materials properties
,
Computer simulation
,
Fibers
,
Pipes
,
Stress
,
Pressure
Design and Analysis of Bolted Joints
Breech Lock Exchangers, Obtaining Leak Free Performance
PVP 2014; V003T03A014https://doi.org/10.1115/PVP2014-28174
Topics:
Leakage
,
Locks (Waterways)
,
Design
,
Manufacturing
,
Screws
,
Diaphragms (Mechanical devices)
,
Diaphragms (Structural)
,
Gaskets
,
Engineers
,
Friction
Bolted Flanged Joint Creep/Relaxation Results at High Temperatures
PVP 2014; V003T03A015https://doi.org/10.1115/PVP2014-28261
Topics:
Aeroelasticity
,
High temperature
,
Gaskets
,
Finite element analysis
,
Flanges
,
Pipes
,
Valves
,
Testing
,
Flange connections
,
Geometry
Methodological Aspects for Numerical Analysis of Lid Systems for SNF and HLW Transport Packages
PVP 2014; V003T03A016https://doi.org/10.1115/PVP2014-28304
Topics:
Numerical analysis
,
Transport packages
,
Containment systems
,
Accidents
,
Design
,
Finite element analysis
,
Gaskets
,
Stress
,
Deformation
,
Materials research
RCC-MRx Edition 2012: Bolt Design Rules Criteria
PVP 2014; V003T03A017https://doi.org/10.1115/PVP2014-28366
Topics:
Design
,
Flanges
,
High temperature
,
Nuclear power stations
,
Sodium
,
Construction
,
Fusion reactors
,
Low temperature
,
Pipes
,
Pressure
Case Study: Failure Analysis of a BFJ in Cyclic Service
PVP 2014; V003T03A019https://doi.org/10.1115/PVP2014-28956
Topics:
Bolted flanges
,
Cycles
,
Failure
,
Failure analysis
,
Finite element analysis
,
Flanges
,
Natural gas
,
Pressure
,
Temperature
,
Transients (Dynamics)
Analysis and Testing of a Ring-Joint Flange
PVP 2014; V003T03A020https://doi.org/10.1115/PVP2014-28980
Topics:
Flanges
,
Testing
,
Gaskets
,
Finite element analysis
,
Manufacturing
,
Cycles
,
Geometry
,
Stress
Design and Analysis of Piping and Components
Vibration Analysis of Curved Pipes Conveying Fluid
PVP 2014; V003T03A027https://doi.org/10.1115/PVP2014-28327
Evaluation of the Numerical Validity of the J Parameter for a Crack Located on a Multi-Material Interface
PVP 2014; V003T03A028https://doi.org/10.1115/PVP2014-28338
Topics:
Fracture (Materials)
,
Steel
,
Circuits
,
Design
,
Finite element analysis
,
Fracture toughness
,
Pipes
,
Piping systems
,
Pressure
,
Pressure vessels
Numerical Simulation of Laser Shock Peening in Presence of Weld for Fatigue Life Design
PVP 2014; V003T03A029https://doi.org/10.1115/PVP2014-28400
Topics:
Computer simulation
,
Design
,
Fatigue life
,
Laser hardening
,
Residual stresses
,
Stress
,
Plates (structures)
,
Welding
,
Constitutive equations
,
Deformation
Effect of Specimen Geometry on the Predicted Mechanical Behavior of Polyethylene Pipe Material
PVP 2014; V003T03A030https://doi.org/10.1115/PVP2014-28401
Topics:
Geometry
,
Mechanical behavior
,
Polyethylene pipes
,
Pipes
,
ASTM International
,
Density
,
Design
,
Failure
,
Fracture (Materials)
,
Fracture (Process)
Ductile Fracture Analysis Under Large Amplitude Cycles
PVP 2014; V003T03A031https://doi.org/10.1115/PVP2014-28426
Topics:
Cycles
,
Ductile fracture
,
Fracture (Materials)
,
Crack propagation
,
Displacement
,
Pipes
,
Carbon steel
,
Circuits
,
Electric potential
,
Geometry
Determination of Creep Properties of PE 4710 Cell Classification 445574C High Density Polyethylene
PVP 2014; V003T03A032https://doi.org/10.1115/PVP2014-28548
Topics:
Creep
,
Density
,
Pipes
,
ASME Boiler and Pressure Vessel Code
,
Carbon steel
,
Safety
,
Water
,
Chemical processes
,
Construction
,
Corrosion resistance
Determination of Updated Fatigue Properties of PE 4710 Cell Classification 445574C High Density Polyethylene
PVP 2014; V003T03A033https://doi.org/10.1115/PVP2014-28549
Topics:
Density
,
Fatigue properties
,
Pipes
,
ASME Boiler and Pressure Vessel Code
,
Carbon steel
,
Safety
,
Water
,
Chemical processes
,
Construction
,
Corrosion resistance
Statistical Approach of Stress Concentration Factor (SCF) Within Pipeline Girth Welds
PVP 2014; V003T03A034https://doi.org/10.1115/PVP2014-28837
Topics:
Pipelines
,
Stress concentration
,
Welded joints
,
Pipes
,
Manufacturing
,
Pipe sizes
,
Stress
,
Dimensions
,
Engineering design
,
Manufacturing systems
Experimental and Analytical Study for Collapse Characteristics of 45 Deg Cylinder-to-Cylinder Intersections
PVP 2014; V003T03A035https://doi.org/10.1115/PVP2014-28838
Topics:
Collapse
,
Cylinders
,
Design
,
Finite element analysis
,
Stress
,
Inelastic analysis
,
Pressure
,
Failure
,
Fracture (Materials)
,
Fracture (Process)
On Pipe Elbow Elements in ABAQUS and Benchmark Tests
PVP 2014; V003T03A036https://doi.org/10.1115/PVP2014-28920
Topics:
Pipes
,
Computation
,
Stress
,
Computer software
,
Shells
,
Cantilevers
,
Deformation
,
Finite element analysis
,
Pipe bending
,
Reliability
Multi-Feeder Stress Analysis With Interlinked Spacers for a CANDU Reactor
PVP 2014; V003T03A037https://doi.org/10.1115/PVP2014-28985
Topics:
Stress analysis (Engineering)
,
Fuels
,
Stress
,
Design
,
Modeling
,
Rods
,
Space
,
Structural elements (Construction)
Steam Blowing Techniques for Large Solar Thermal Power Plants
PVP 2014; V003T03A038https://doi.org/10.1115/PVP2014-29065
Topics:
Solar thermal power
,
Steam
,
Solar energy
,
Flow (Dynamics)
,
Boilers
,
Modeling
,
Pipes
,
Power stations
,
Solar collectors
,
Temperature
Effect of Reflection Waves on Water Hammer Loads
PVP 2014; V003T03A039https://doi.org/10.1115/PVP2014-29121
Topics:
Reflection
,
Stress
,
Water hammer
,
Waves
,
Fluids
,
Design
,
Pipes
,
Steam
,
Computer software
,
Computers
Design and Analysis of Pressure Vessels, Heat Exchangers and Components
Assessment of Weep Holes in Cylindrical Shell Based on Elastic-Plastic Stress Analysis Method
PVP 2014; V003T03A040https://doi.org/10.1115/PVP2014-28075
Topics:
Pipes
,
Stress analysis (Engineering)
,
Weep holes
,
Vessels
,
Leakage
,
Carbon steel
,
Shells
,
Construction
,
Cycles
,
Damage
Design of an Underwater Towfish Using Design by Rule and Design by Analysis
PVP 2014; V003T03A041https://doi.org/10.1115/PVP2014-28122
Topics:
Design
,
Buckling
,
Pressure vessels
,
Seas
,
Ships
,
Vessels
,
Control systems
,
Dimensions
,
Electricity (Physics)
,
Engineering prototypes
Global Analysis of Shell Key Gasification Equipment Based on Finite Element Method
PVP 2014; V003T03A042https://doi.org/10.1115/PVP2014-28182
Topics:
Finite element methods
,
Fuel gasification
,
Shells
,
Coal
,
Stress
,
China
,
Ducts
,
Syngas
,
Clean coal technology
,
Computer software
Damage Analysis and Fatigue Evaluation of an Aluminium Brazed Plate Fin Heat Exchanger
PVP 2014; V003T03A045https://doi.org/10.1115/PVP2014-28391
Topics:
Aluminum
,
Damage
,
Fatigue
,
Heat exchangers
,
Stress
,
Cycles
,
Nitrogen
,
Compressors
,
Construction
,
Finite element analysis
Prediction of Packed Catalyst Bed Stress and Load for Radial Flow Reactors
PVP 2014; V003T03A046https://doi.org/10.1115/PVP2014-28455
Topics:
Catalysts
,
Radial flow
,
Stress
,
Pressure drop
,
Design
,
Granular materials
Seismic Performance Analysis of the Large Spherical Tank
PVP 2014; V003T03A047https://doi.org/10.1115/PVP2014-28653
Topics:
Computer software
,
Design
,
Excitation
,
Finite element analysis
,
Safety
,
Security
,
Stress
Design and Analysis of Flanged Skirt Splices for Tall Pressure Vessel Towers
PVP 2014; V003T03A048https://doi.org/10.1115/PVP2014-28847
Topics:
Design
,
Pressure vessels
,
Manufacturing
,
Steel construction
,
Transportation systems
,
Vessels
,
Welding
,
Analytical methods
,
Chemical industry
,
Construction
Design and Analysis of Brick Lined Autoclaves for the Mining Industry
PVP 2014; V003T03A049https://doi.org/10.1115/PVP2014-28852
Topics:
Bricks
,
Design
,
Mining industry
,
Pressure
,
Carbon steel
,
Corrosion
,
Membranes
,
Damage
,
Deflection
,
Diluents
Mechanical Study on Fixed Tubesheet Based on Finite Element Analysis
PVP 2014; V003T03A051https://doi.org/10.1115/PVP2014-28909
Topics:
Deflection
,
Finite element analysis
,
Finite element methods
,
Shells
,
Stress
Skirt Splice Methods for Tall Pressure Vessel Towers
PVP 2014; V003T03A052https://doi.org/10.1115/PVP2014-28957
Topics:
Pressure vessels
,
Design
,
Vessels
,
Transportation systems
,
Elevations (Drawings)
,
Manufacturing
Fatigue
A Novel High Cycle Fatigue Assessment of Small-Bore Side Branches: Tailor-Made Acceptable Vibration Levels Based on the Remaining Life of Existing Structures
Pieter van Beek, Richard Pijpers, Kenneth Macdonald, Johan Maljaars, Knud Lunde, Harry Korst, Frode Hansen
PVP 2014; V003T03A057https://doi.org/10.1115/PVP2014-28378
Topics:
High cycle fatigue
,
Vibration
,
Stress
,
Fracture mechanics
,
Fatigue
,
Pipes
,
Piping systems
,
Cycles
,
Damping
,
Engineering standards
Application of Advanced Fatigue Damage Parameters in Comparison With Fatigue Analysis Included in Codes and Standards
PVP 2014; V003T03A058https://doi.org/10.1115/PVP2014-28379
Topics:
Engineering standards
,
Fatigue analysis
,
Fatigue damage
,
Fatigue
,
Stress
,
Fatigue strength
,
Fatigue testing
,
Finite element analysis
,
Tension
,
Torsion
Thermal and Mechanical Fatigue Loading: Mechanisms of Crack Initiation and Crack Growth
PVP 2014; V003T03A060https://doi.org/10.1115/PVP2014-28411
Topics:
Fatigue
,
Fracture (Materials)
,
Stress
,
Temperature
,
Steel
,
Deformation
,
Microcracks
,
Stainless steel
,
Boundary-value problems
,
Computer simulation
Equi-Biaxial Loading Effect on Austenitic Stainless Steel Fatigue Life
PVP 2014; V003T03A061https://doi.org/10.1115/PVP2014-28421
Topics:
Fatigue life
,
Stainless steel
,
Fatigue
,
Collaboration
,
Design
,
Fatigue damage
,
Finite element methods
,
Finite element model
,
Geometry
,
In-service inspection
Fatigue Behavior of Butt Weld Seams: Experimental Investigation and Numerical Simulation
Kay Langschwager, Alexander Bosch, Eliane Lang, Jürgen Rudolph, Michael Vormwald, Alfred Scholz, Matthias Oechsner
PVP 2014; V003T03A064https://doi.org/10.1115/PVP2014-28787
Topics:
Computer simulation
,
Fatigue
,
Finite element methods
,
Pipes
,
Stress
,
Thermomechanics
,
Base metals
,
Fatigue failure
,
Geometry
,
Low cycle fatigue
Fatigue Life of BWR Feedwater Nozzles Considering Actual Plant Transients
PVP 2014; V003T03A066https://doi.org/10.1115/PVP2014-28891
Topics:
Boiling water reactors
,
Fatigue life
,
Feedwater
,
Nozzles
,
Transients (Dynamics)
,
Fatigue
,
Design
,
Analytical methods
,
Fatigue analysis
,
Fatigue failure
Fitness for Service Evaluations and Post Construction Issues
Brittle Fracture Assessments of Offshore PSVs
PVP 2014; V003T03A068https://doi.org/10.1115/PVP2014-28071
Stress Analysis of Bulges in Cylindrical and Oval Pressure Vessels
PVP 2014; V003T03A069https://doi.org/10.1115/PVP2014-28138
Topics:
Pressure vessels
,
Stress analysis (Engineering)
,
Stress
,
Vessels
,
Coke
,
Engineers
,
Finite element model
,
Fitness-for-service
,
Hoop stress
,
Pressure
Repairing Corrosion Damage the Smart Way: A Story of Vessel Redemption
PVP 2014; V003T03A071https://doi.org/10.1115/PVP2014-28211
Topics:
Corrosion
,
Damage
,
Maintenance
,
Vessels
,
Metals
,
Fitness-for-service
,
Inspection
,
Carbon dioxide
,
Design
,
Modeling
Developing an Engineering Based Integrity Management Program for Piping, Pipelines, and Plant Equipment
PVP 2014; V003T03A072https://doi.org/10.1115/PVP2014-28256
Topics:
Pipelines
,
Pipes
,
Automobiles
,
Coal
,
Experimental methods
,
Fitness-for-service
,
Inspection
,
Piping systems
,
Rails
,
Testing
Stress Intensification Factors for Unreinforced Elbow Branch Connections in Old Carbon-Steel Pipelines
PVP 2014; V003T03A073https://doi.org/10.1115/PVP2014-28528
Topics:
Carbon steel
,
Pipelines
,
Stress
,
Pipes
,
Finite element analysis
,
Stress analysis (Engineering)
,
Fatigue
,
Fitness-for-service
,
Fluids
,
Pressure
Failure Analysis of Burner Muffle in Shell Gasifier
PVP 2014; V003T03A074https://doi.org/10.1115/PVP2014-28696
Topics:
Failure analysis
,
Shells
,
Failure
,
Cooling
,
High temperature
,
Microscopes
,
Optical microscopes
,
Oxidation
,
Slags
,
Temperature
Fracture
Crack Initiation and Propagation Clad Pipe Girth Weld Flaws
PVP 2014; V003T03A077https://doi.org/10.1115/PVP2014-28017
Topics:
Fracture (Materials)
,
Pipes
,
Design
,
Ductile fracture
,
Base metals
,
Brittleness
,
Damage
,
Damage mechanics
,
Fracture mechanics
,
Fracture toughness
The Combined Effect of a Finite Axial Erosion With Bauschinger Modified Autofrettage on the 3D SIFs of Pressurized Cylinders
PVP 2014; V003T03A078https://doi.org/10.1115/PVP2014-28033
Topics:
Autofrettage
,
Cylinders
,
Erosion
,
Fracture (Materials)
,
Fatigue life
,
Finite element methods
,
Durability
,
Hoop stress
,
Pressure vessels
,
Stress
Tests on SENT Specimens to Study Geometry Effects in the Brittle to Ductile Transition
PVP 2014; V003T03A080https://doi.org/10.1115/PVP2014-28099
Topics:
Brittleness
,
Geometry
,
Fracture (Materials)
,
Fracture (Process)
,
Fatigue
,
Fracture toughness
,
Piping systems
,
Shapes
,
Temperature
,
Testing
Improvements to J-Estimation Scheme for Predicting Moment-Rotation Response of Circumferential Through-Wall Cracks in Piping
PVP 2014; V003T03A081https://doi.org/10.1115/PVP2014-28155
Topics:
Fracture (Materials)
,
Pipes
,
Rotation
,
Thin shells
,
Stress
,
Differential equations
,
Displacement
,
Fracture mechanics
,
Shells
,
Tension
Evaluation of Fracture Toughness Behavior of Polyethylene Pipe Materials
PVP 2014; V003T03A082https://doi.org/10.1115/PVP2014-28407
Topics:
Fracture toughness
,
Polyethylene pipes
,
Welding
,
Pipes
,
Plane strain
,
Density
,
Natural gas
,
Piping systems
,
Temperature
Brittle Fracture Probabilistic Assessment of WWER-1000 RPVs
PVP 2014; V003T03A085https://doi.org/10.1115/PVP2014-28557
Topics:
Brittle fracture
,
Probability
,
Fracture toughness
,
Metals
,
Fracture (Materials)
,
Nuclear power stations
,
Shapes
,
Temperature
,
Base metals
,
Databases
Finite Element Simulation of a Circumferential Through-Thickness Crack in a Cylinder
PVP 2014; V003T03A086https://doi.org/10.1115/PVP2014-28749
Topics:
Cylinders
,
Finite element analysis
,
Fracture (Materials)
,
Simulation
,
Stress
,
Maintenance
,
Pipes
,
Displacement
,
Finite element model
,
Fracture mechanics
Simplified Approach for Fracture Integrity Assessment Procecedure of Flawed Weld Joint Under Non-Conventional Condition
PVP 2014; V003T03A088https://doi.org/10.1115/PVP2014-28790
Topics:
Fracture (Materials)
,
Finite element analysis
,
Stress
,
Geometry
,
Engineering standards
,
Numerical analysis
,
Pipes
,
Pressure
,
Safety
Inelastic, Nonlinear and Limit Load Analysis
Shakedown Boundary of a 90–Degree Back–to–Back Pipe Bend Subjected to Steady Internal Pressures and Cyclic Out–of–Plane Bending Moments
PVP 2014; V003T03A091https://doi.org/10.1115/PVP2014-28214
Topics:
Pipe bends
,
Pressure
,
Aircraft engines
,
Engineering simulation
,
Finite element analysis
,
Performance
,
Pipes
,
Simulation
,
Stress
,
Turbofans
Simulation of the Creep and Fatigue Damages in High-CR Steel Components Based on a Modified Becker-Hackenberg Model
PVP 2014; V003T03A092https://doi.org/10.1115/PVP2014-28253
Topics:
Creep
,
Fatigue damage
,
Simulation
,
Steel
,
Fatigue
,
Damage
,
Stress
,
Thermomechanics
,
Advanced materials
,
Computer software
Gross Plastic Deformation of Pipe Bends Under Internal Pressure and In- and Out-of-Plane Bending: A Study on the Sensitivity of the Finite Element Models
PVP 2014; V003T03A094https://doi.org/10.1115/PVP2014-28536
Topics:
Deformation
,
Finite element model
,
Pipe bends
,
Pressure
,
Pipes
,
Stress
,
Collapse
,
Bifurcation
,
Buckling
,
Damping
Local Limit Load Analytical Model for Thick-Walled Pipe With Axial Surface Defect
PVP 2014; V003T03A095https://doi.org/10.1115/PVP2014-28666
Topics:
Pipes
,
Stress
,
Fracture (Materials)
,
Hoop stress
,
Accounting
,
Hinges
,
Modeling
,
Pressure
Local and Global Reference Stress for Circumferential Irregular-Shaped Defects in Pipes
PVP 2014; V003T03A096https://doi.org/10.1115/PVP2014-28670
Topics:
Pipes
,
Stress
,
Collapse
,
Deformation
,
Algorithms
,
Fracture (Materials)
,
Modeling
,
Pipelines
,
Pressure
,
Simulation
Further Development of the Nonlocal Damage Model of Rousselier for the Transition Regime of Fracture Toughness and Different Stress States
PVP 2014; V003T03A097https://doi.org/10.1115/PVP2014-28714
Topics:
Damage
,
Fracture toughness
,
Stress
,
Fracture (Materials)
,
Damage mechanics
,
Safety
,
Brittleness
,
Failure
,
Brittle fracture
,
Computation
A Study on Development of Optimum FE Analysis Model on Welding Stress Analysis for CEDM Penetration Nozzle
PVP 2014; V003T03A098https://doi.org/10.1115/PVP2014-28759
Topics:
Finite element analysis
,
Nozzles
,
Stress analysis (Engineering)
,
Welding
,
Density
,
Experimental methods
,
Finite element model
,
Stress
,
Drilling
,
Errors
Thermal Stresses and Elevated Temperature Design
Estimation of Graphite Dust Production in a Pebble-Bed Type Nuclear Reflector
PVP 2014; V003T03A101https://doi.org/10.1115/PVP2014-28545
Topics:
Dust
,
Graphite
,
Finite element methods
,
Friction
,
Adhesives
,
Dust explosions
,
Helium
,
Stress
,
Wear
Buckling Behaviors of Metallic Columns Under Compressive Load at Extremely High Temperatures
PVP 2014; V003T03A103https://doi.org/10.1115/PVP2014-28683
Topics:
Buckling
,
High temperature
,
Stress
,
Creep
,
Accidents
,
Deflection
,
Collapse
,
Failure
,
Fukushima nuclear disaster, Japan, 2011
,
Nuclear power stations
Two Axisymmetric Models Application for Fast and Conservative Analysis of Cold Plumes in RPV at PTS Condition
PVP 2014; V003T03A106https://doi.org/10.1115/PVP2014-28997
Topics:
Plumes (Fluid dynamics)
,
Stress
,
Temperature
,
Brittleness
,
Cylinders
,
Failure
,
Phase transition temperature
,
Probability
,
Reactor vessels
,
Shells
Analysis on Ultimate Load Capacity of Cylinder With Local Discontinuity Under High Temperature Gradient
PVP 2014; V003T03A107https://doi.org/10.1115/PVP2014-29051
Topics:
Cylinders
,
High temperature
,
Stress
,
Temperature
,
Pressure
,
Accident management
,
Thermal stresses
,
Wall thickness
,
Cavities
,
Floods
Creep Analysis of Hemisphere Shell Structure Under High Temperature Gradient
PVP 2014; V003T03A108https://doi.org/10.1115/PVP2014-29078
Topics:
Creep
,
High temperature
,
Shells
,
Pressure
,
Temperature
,
Stress
,
Wall thickness
,
Failure
,
Pressurized water reactors
,
Accident management
Email alerts
Most Read Proceedings Papers in PVP
PVP2024 Front Matter
PVP2024
PVP2023 Front Matter
PVP2023