Skip to Main Content
American Society of Mechanical Engineers: Digital Collection
Cart
header search
Search
Advanced Search
Skip Nav Destination

Proceedings Papers

Proceedings Volume Cover
ASME 2013 Pressure Vessels and Piping Conference
July 14–18, 2013
Paris, France
Conference Sponsors:
  • Pressure Vessels and Piping Division
  • Nondestructive Evaluation Engineering Division
ISBN:
978-0-7918-5569-0
Volume 5: High-Pressure Technology; ASME NDE Division; Rudy Scavuzzo Student Paper Symposium

High-Pressure Technology

Composite Materials for High Pressure Vessels and Components

Visual End-of-Life Criterion for Composite High Pressure Vessels for Hydrogen Storage
Heng-Yi Chou, Anthony Bunsell, Alain Thionnet
PVP 2013; V005T05A001https://doi.org/10.1115/PVP2013-97128
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Composite materials , High-pressure vessels , Hydrogen storage , Failure , Pressure vessels , Carbon fibers , Reliability , Damage , Fiber reinforced composites , Fibers
Effect of the Loading Rate on Failure of Composite Pressure Vessel
Heng-Yi Chou, Anthony Bunsell, Georg Mair, Alain Thionnet
PVP 2013; V005T05A002https://doi.org/10.1115/PVP2013-97159
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Composite materials , Failure , Pressure vessels , Fibers , Stress , Simulation , Carbon fibers , Damage , Epoxy adhesives , Epoxy resins

Compressors in High Pressure Applications

Design and Performance of Valves for Compressors in LDPE Plants
Enzo Giacomelli, Massimo Schiavone, Fabio Manfrone, Andrea Raggi
PVP 2013; V005T05A003https://doi.org/10.1115/PVP2013-97312
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Compressors , Design , Valves , Energy consumption , Pressure , Simulation , Circuits , Computational fluid dynamics , Cylinders , Electromechanical actuators
Challenging Hypers Performance
Enzo Giacomelli
PVP 2013; V005T05A004https://doi.org/10.1115/PVP2013-97314
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Compressive stress , Compressors , Computational fluid dynamics , Construction , Cylinders , Design , Energy consumption , Failure , Failure mechanisms , Fatigue
Hyper Compressor Tungsten Carbide Plunger Repair
Randy Manuel
PVP 2013; V005T05A005https://doi.org/10.1115/PVP2013-97578
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Compressors , Maintenance , Tungsten , Leakage , Corrosion , Failure , Fatigue , Heat , Low density polyethylene , Lubrication
A Multi-Phase CFD Study of a Liquid Slug Ingestion in a Reciprocating Compressor
Riccardo Traversari, Bernardo Bettini, Cosimo Carcasci, Andrea Fusi
PVP 2013; V005T05A006https://doi.org/10.1115/PVP2013-97675
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Compressors , Computational fluid dynamics , Slug flows , Pressure , Cylinders , Computer software , Design , Failure , Failure analysis , Fluid structure interaction
Assessment of Stress Distribution in a Buttress Type Connection for Polyethylene Autoclave Reactor
Navid Haeri, John S. Lewis, Brian A. Cornah
PVP 2013; V005T05A007https://doi.org/10.1115/PVP2013-97707
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Stress concentration , Stress , Design , Corrosion , Damage , Fatigue , Fatigue cracks , Finite element model , Fracture (Materials) , Fracture (Process)
Cemented Carbide Plungers for LDPE Hyper Compressors: Properties, Defects and Reconditioning
Luc van Loon
PVP 2013; V005T05A008https://doi.org/10.1115/PVP2013-97854
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Compressors , Failure , Fatigue cracks , Fracture (Materials) , Brittleness , Corrosion , Damage , Explosions , Fire , Leakage
Improving the Traditional RCA Methodology to Design a Most Efficient and Reliable Valve for LDPE Hypercompressors Leveraging Experimental Data From Test Bench Simulation: A Real Case Study
Carmelo Maggi, Leonardo Tognarelli, Riccardo Bagagli, Jan Wojnar
PVP 2013; V005T05A009https://doi.org/10.1115/PVP2013-97926
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Design , Simulation , Valves , Geometry , Pressure , Damage , Drag (Fluid dynamics) , Failure mechanisms , Flow (Dynamics) , Optimization
How Finite Element Calculations Improve Hyper Compressor Performance and Lifetime
Nicole Retz, Andreas Allenspach
PVP 2013; V005T05A010https://doi.org/10.1115/PVP2013-98158
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Compressors , Finite element analysis , Design , Autofrettage , Computers , Manufacturing , Modeling , Optimization , Valves , Vibration

Design, Analysis, Fabrication, Operation and Maintenance of High Pressure Components and Systems

Three-Dimensional Stress Intensity Factors for Ring Cracks and Arrays of Coplanar Cracks Emanating From the Inner Surface of a Spherical Pressure Vessel
M. Perl, V. Berenshtein
PVP 2013; V005T05A011https://doi.org/10.1115/PVP2013-97006
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Fracture (Materials) , Pressure vessels , Stress , Vessels , Density , Fracture (Process) , Fatigue life , Geometry , Wall thickness
Deep Well Drilling Applications
Nigel R. McKie, Daniel T. Peters, Keegan A. Tooley
PVP 2013; V005T05A012https://doi.org/10.1115/PVP2013-97053
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: American Petroleum Institute , Bearings , Design , Design methodology , Drilling , Emergencies , Finite element analysis , Flanges , High pressure (Physics) , High temperature
New Challenges in the Production of Ultra Large Forgings for the Manufacturing of Pressure Vessels
Jesus Talamantes-Silva, Paul Bates, Sinan Al-Bermani, Peter Davies, Andrew Hambleton, David Bunney
PVP 2013; V005T05A013https://doi.org/10.1115/PVP2013-97927
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Forgings (Products) , Manufacturing , Pressure vessels , Alloys , Fracture toughness , Mechanical properties , Safety , Testing
Hot Isostatic Pressing of Powder Metal as an Alternative to Forging of SA-723
Linda Fridlund
PVP 2013; V005T05A014https://doi.org/10.1115/PVP2013-98168
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Forging , Hot pressing , Metals , Steel , Mechanical properties , Alloys , Shapes , Stainless steel , Superalloys , Tool steel

Structural Response to Highly Dynamic (Impulsive) Events

Protection Against Local Failure for Impulsively Loaded Vessels
Alan M. Clayton, Thomas A. Duffey
PVP 2013; V005T05A015https://doi.org/10.1115/PVP2013-97043
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Failure , Vessels , ASME Standards , Collapse , Damage mechanics , Design , Geometry , Pipes , Pressure
Effect of Structural Dimensions on Strain Growth of Cylindrical Vessels
Q. Dong, Y. Gu
PVP 2013; V005T05A016https://doi.org/10.1115/PVP2013-97055
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Dimensions , Vessels
A Simplified Method to Determine Initial Estimates of Peak Strains in Composite Explosive Containment Vessels
Alan M. Clayton
PVP 2013; V005T05A017https://doi.org/10.1115/PVP2013-97068
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Composite materials , Containment vessels , Explosives , Vessels , Fibers , Analytical methods , Finite element analysis , Stress
Response of Piping Tees to Propagating Detonations
Thomas C. Ligon, David J. Gross, Joseph E. Shepherd
PVP 2013; V005T05A018https://doi.org/10.1115/PVP2013-97115
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Explosions , Pipes , Piping systems , Cantilever beams , Engineering simulation , Finite element analysis , Pressure , Simulation , Stress , Data acquisition systems
On the Adequacy of Shell Models for Predicting Stresses and Strains in Thick-Walled Tubes Subjected to Detonation Loading
Neal P. Bitter, Joseph E. Shepherd
PVP 2013; V005T05A019https://doi.org/10.1115/PVP2013-97148
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Explosions , Shells , Stress , Finite element model , Wall thickness , Wavelength , Errors , Transients (Dynamics)
Experimental Determination of the Static Equivalent Pressures of Gas Phase Detonations in Pipes and Comparison With Numerical Models
Hans-Peter Schildberg, Jan P. M. Smeulers, Gersom Pape
PVP 2013; V005T05A020https://doi.org/10.1115/PVP2013-97677
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Computer simulation , Explosions , Pipes , Pressure , Design , Stress , Temperature , Flanges , Ignition , Ignition delay
Experience With Using Code Case 2564 to Design and Certify an Impulsively Loaded Vessel
Brent Haroldsen, Jerome Stofleth, Mien Yip, Allan Caplan
PVP 2013; V005T05A021https://doi.org/10.1115/PVP2013-97987
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Design , Vessels , Explosives , Testing , Army , US Department of Defense , Explosions , Pressure vessels , Safety , Shapes
Design Basis of an Impulsively Loaded Vessel for Specific Loading Configurations
Mien Yip, Brent Haroldsen
PVP 2013; V005T05A022https://doi.org/10.1115/PVP2013-97998
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Design , Vessels , Explosives , Containment vessels , Explosions , Geometry , ASME Boiler and Pressure Vessel Code , Munitions
Experimental Study on Vibration Modes of a Spherical Vessel
Y. Gu, Q. Dong
PVP 2013; V005T05A023https://doi.org/10.1115/PVP2013-98108
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Containment vessels , Vessels , Vibration

ASME NDE Division

General

Nondestructive Testing Method and Testing Time Choice of Pressure Equipment
Weihe Guan, Xuedong Chen, Changzhou Yan, Yu Fan, Yuanhong Tao
PVP 2013; V005T10A001https://doi.org/10.1115/PVP2013-97555
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Design , Nondestructive evaluation , Pressure equipment , Safety , Testing
Alternate Requirements for Protection Against Pressurized Thermal Shock (PTS)
Stephen M. Parker, Nathan A. Palm, Xavier Pitoiset
PVP 2013; V005T10A002https://doi.org/10.1115/PVP2013-97577
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Thermal shock , Pressurized water reactors , Embrittlement , Fracture mechanics , In-service inspection , Nuclear power stations , Plant design , Regulations
Image Quality Assessment of Four Different Computed Radiography Systems for NDT Applications
Angela Peterzol, Bruno Bader, Julien Banchet, Claire Caperaa, Vivian Didier
PVP 2013; V005T10A003https://doi.org/10.1115/PVP2013-97704
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: ASTM International , Biomedicine , Collaboration , Imaging , Phosphors , Reliability , Steel
The Utility of Numerical Methods in NDE
Jason K. Van Velsor, Jeffrey Milligan, Michael Greveling, Matthew S. Lindsey
PVP 2013; V005T10A004https://doi.org/10.1115/PVP2013-98087
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Carbon steel , Computer simulation , Computers , Errors , Fatigue cracks , Fittings , Metals , Modeling , Nondestructive evaluation , Numerical analysis

Plant Inspection Issues

Improvement of Reliability Assessment of Gas Pipeline Using Acoustic Emission Technique
Giuseppe Giunta, Sergio Budano, Antonio Lucci, Roberto Piancaldini, Luca Prandi
PVP 2013; V005T10A005https://doi.org/10.1115/PVP2013-97175
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Acoustic emissions , Pipelines , Reliability , Damage , Pipes , Pressure , Acoustics , American Petroleum Institute , Chisels , Fracture (Materials)
Accurate Monitoring of Pipe and Structural Vibrations by Remote RADAR Observations
Andrea Monti Guarnieri, Davide D’Aria, Filippo Speziali, Giuseppe Giunta
PVP 2013; V005T10A006https://doi.org/10.1115/PVP2013-97204
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Pipes , Radar , Vibration , Accelerometers , Compression
Analysis of Corrosion Areas in Pipelines Using Guided Wave Propagation: Numerical Simulations and Experimental Tests
Florin Turcu, Francesco Bertoncini, Giuseppe Giunta, Marco Raugi
PVP 2013; V005T10A007https://doi.org/10.1115/PVP2013-97256
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Computer simulation , Corrosion , Pipelines , Wave propagation , Coating processes , Coatings , Guided wave ultrasonic testing , Inspection , Noise (Sound) , Numerical analysis
Advanced Pipeline Vibroacoustic Monitoring
Giancarlo Bernasconi, Silvio Del Giudice, Giuseppe Giunta, Francesco Dionigi
PVP 2013; V005T10A008https://doi.org/10.1115/PVP2013-97281
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Pipelines , Fluids , Pipes , Acoustics , Pressure , Waves , Absorption , Crude oil , Flow (Dynamics) , Leakage
Reactor Pressure Vessel Nozzle Inner-Radius Examination
S. W. Glass, B. Thigpen, G. Guse, E. Brau
PVP 2013; V005T10A009https://doi.org/10.1115/PVP2013-97307
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Nozzles , Reactor vessels , Inspection , Transducers , Ultrasonic testing , Vessels , Computer software , Degrees of freedom , Geometry , Lasers

Research

Recent PWAS-SHM Developments in the Laboratory for Active Materials and Smart Structures
Victor Giurgiutiu
PVP 2013; V005T10A010https://doi.org/10.1115/PVP2013-97523
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Active materials , Smart structures , Structural health monitoring , Waves , Damage , Finite element methods , Thin wall structures , Computer software , Energy consumption , Graphical user interfaces
On-Line Monitoring of Cracks in Piping Weldment Using Array Probed Direct Current Potential Drop
Jae Young Yoon, Ye Ji Kim, Il Soon Hwang, L. Ayers, M. Short, L. Bromberg, R. G. Ballinger
PVP 2013; V005T10A011https://doi.org/10.1115/PVP2013-97688
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Fracture (Materials) , Pipes , Finite element analysis , Design , Leakage , Licensing , Nuclear power stations , Probes , Reliability , Signals
Non-Destructive Detection of Crack in HDPE Plate by Nanometric Change in Surface Profile
Naoya Tada, Makoto Uchida, Yoshitaka Matsukawa
PVP 2013; V005T10A012https://doi.org/10.1115/PVP2013-97732
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Crack detection , Stress , Fracture (Materials) , Damage , Deformation , Density , Finite element analysis , Lasers , Microscopes , Plates (structures)
Development of an Expert System to Characterize Weld Defects Identified by Ultrasonic Testing
D. Shahriari, A. Zolfaghari, M. Jahazi, P. Bocher
PVP 2013; V005T10A013https://doi.org/10.1115/PVP2013-97783
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Expert systems , Ultrasonic testing , Algorithms , Flaw detection , Bearings , Diluents , Errors , Failure , Gages , Inspection
Development of a Residual Stress Evaluation Technique by the Combined Use of Surface Strain Measurements Under the Spherical Indentation Method
Norihiko Ozawa, Tomoaki Yoshizawa, Yutaka Watanabe, Tetsuo Shoji
PVP 2013; V005T10A014https://doi.org/10.1115/PVP2013-97818
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Strain measurement , Stress , Finite element methods , Pressure , Residual stresses , Compressive stress , Plates (structures) , Reliability , Strain gages , Trajectories (Physics)

Rudy Scavuzzo Student Paper Symposium

21st Annual Student Paper Competition

Behavior of Compressive Residual Stresses in High Strength Steel Welds Induced by High Frequency Mechanical Impact Treatment
Mansoor Khurshid, Zuheir Barsoum, Gary Marquis
PVP 2013; V005T11A001https://doi.org/10.1115/PVP2013-97042
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: High strength steel , Impact , Residual stresses , Welded joints , Finite element analysis , Relaxation (Physics) , Stress , Cycles , Fatigue , Fatigue life
A Review of State-of-the-Art Methods for Pressure Vessels Design Against Progressive Deformation
Philippe Rohart, Saïd Hariri, Yves Simonet
PVP 2013; V005T11A002https://doi.org/10.1115/PVP2013-97051
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Deformation , Design , Pressure vessels , Computation , Cycles , Damage , Design methodology , Engineering standards , Failure mechanisms , Steady state
The Consequences of Macroscopic Segregation on the Transformation Behaviour of a Pressure-Vessel Steel
Ed Pickering, Harry Bhadeshia
PVP 2013; V005T11A003https://doi.org/10.1115/PVP2013-97097
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Pressure vessels , Steel , Casting , Mechanical properties , Electromagnetic scattering , Forgings (Products) , Heat
Coalesced Martensite in Pressure Vessel Steels
Hector Pous-Romero, Harry Bhadeshia
PVP 2013; V005T11A004https://doi.org/10.1115/PVP2013-97099
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Pressure vessels , Steel , Fracture toughness , Platelets , Alloys , Heat treating (Metalworking) , Quenching (Metalworking) , Water
A Micromechanics Approach for Assessing the Applicability of Precracked Charpy Specimens to Determine the T0 Reference Temperature
Rafael G. Savioli, Claudio Ruggieri
PVP 2013; V005T11A005https://doi.org/10.1115/PVP2013-97100
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Micromechanics (Engineering) , Temperature , Fracture (Materials) , Stress , Fracture toughness , Pressure vessels , Steel , Testing , Finite element analysis , Indexing (Machining)
Residual Stress Measurement in a Stainless Steel Clad Ferritic Plate Using the Contour Method
Nida Naveed, Foroogh Hosseinzadeh, Jan Kowal
PVP 2013; V005T11A006https://doi.org/10.1115/PVP2013-97101
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Stainless steel , Stress , Residual stresses , Cladding systems (Building) , Pressure vessels , Steel , Alloys , Base metals , Corrosion resistance , Metal cladding
Interaction and Assessment of Multiple Local Wall Thinning Defects
Jian Peng, Changyu Zhou, Qiao Dai
PVP 2013; V005T11A007https://doi.org/10.1115/PVP2013-97110
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: American Petroleum Institute , Finite element analysis , Fitness-for-service , Pipes , Pressure , Safety , Stress
Evaluation of Ductile Tearing of X-80 Pipeline Girth Welds Using SE(T), SE(B) and C(T) Fracture Specimens
Leonardo L. S. Mathias, Diego F. B. Sarzosa, Claudio Ruggieri
PVP 2013; V005T11A008https://doi.org/10.1115/PVP2013-97211
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Fracture (Materials) , Pipelines , Welded joints , Steel , Geometry , Structural elements (Construction) , Testing , American Petroleum Institute , Design , Pipes
Constitutive Modeling of High Temperature Uniaxial Creep-Fatigue and Creep-Ratcheting Responses of Alloy 617
P. G. Pritchard, L. Carroll, T. Hassan
PVP 2013; V005T11A009https://doi.org/10.1115/PVP2013-97251
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Alloys , Creep , Fatigue , High temperature , Modeling , Simulation , Constitutive equations , Corrosion , Hardening , Heat exchangers
Plastic Collapse Strength of Circumferentially Multiple Notched Stainless Piping Subjected to Combined Axial Tension and Bending
Seiji Yanagihara, Masaaki Matsubara, Ryosuke Suzuki
PVP 2013; V005T11A010https://doi.org/10.1115/PVP2013-97264
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Collapse , Pipes , Tension , Fracture (Materials) , Plastics , Stainless steel , Stress
Measurement and Simulation of Water Hammer in Piping Systems Including Junction Coupling
Stefan Riedelmeier, Stefan Becker, Eberhard Schlücker
PVP 2013; V005T11A011https://doi.org/10.1115/PVP2013-97278
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Junctions , Piping systems , Simulation , Water hammer , Finite element methods , Fluid structure interaction , Friction , Anchorage , Damping , Displacement
Effect of Make-Up on the Structural Performance of Standard Buttress Connections Subjected to Tensile Loading
Timothy Galle, Wim De Waele, Patrick De Baets
PVP 2013; V005T11A012https://doi.org/10.1115/PVP2013-97282
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: American Petroleum Institute , Clearances (Engineering) , Couplings , Displacement , Failure , Leakage , Oil wells , Pipes , Separation (Technology) , Stress
A Novel Procedure for Measuring the Dynamic Fracture Toughness Using Direct Tension Hopkinson Bar
Gabriel Testa, Andrew Ruggiero, Nicola Bonora
PVP 2013; V005T11A013https://doi.org/10.1115/PVP2013-97341
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Fracture toughness , Tension , Geometry , Computer simulation , Displacement , Dynamic testing (Materials)
Applicability of FFS Assessment Using Partial Safety Factors Evaluated by Infinite Plate
Qiang Qu, Satoshi Izumi, Shinsuke Sakai
PVP 2013; V005T11A014https://doi.org/10.1115/PVP2013-97363
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Fitness-for-service , Safety , Fracture (Materials) , Concretes , Failure , Reliability , Sensitivity analysis , Simulation , Stress
Structural Assessment of Reactor Pressure Vessel Under Core Melting Conditions
Seung-Hyun Kim, Yoon-Suk Chang
PVP 2013; V005T11A015https://doi.org/10.1115/PVP2013-97407
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Melting , Reactor vessels , Stress , Accidents , Cooling , Countermeasures , Damage , Numerical analysis , Power stations , Safety
Experimental Study of Two-Phase Flow Induced by Cavitation Through a Safety Relief Valve
Jorge Pinho, Patrick Rambaud, Saïd Chabane
PVP 2013; V005T11A016https://doi.org/10.1115/PVP2013-97409
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Cavitation , Relief valves , Safety , Two-phase flow , Flow (Dynamics) , Valves , American Petroleum Institute , Cross section (Physics) , Design , Disks
Towards the Development of Filament Wound Composite Structures Submitted to Very High Internal Pressure, Based on Complex Geometry Shapes
Erik Vargas Rojas, David Chapelle, Dominique Perreux
PVP 2013; V005T11A017https://doi.org/10.1115/PVP2013-97418
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Composite materials , Geometry , Pressure , Shapes , Manufacturing , Fibers , Winding (process) , Bearings , Engineering standards , Wind
Microstructural Modelling of P91 Martensitic Steel Under Uniaxial Loading Conditions
Brian Golden, Dongfeng Li, Noel O’Dowd
PVP 2013; V005T11A018https://doi.org/10.1115/PVP2013-97514
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Martensitic steel , Modeling , Deformation , Electron backscatter diffraction , Power stations , Steel , Crystals , Energy generation , Failure , Finite element analysis
Investigating the Influence of Fluid-Structure Interaction on Leak-Before-Break Analyses With a New Finite Element Method
Peter J. Gill, John Sharples, Keith Davey
PVP 2013; V005T11A019https://doi.org/10.1115/PVP2013-97565
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Finite element methods , Fluid structure interaction , Leak-before-break , Leakage , Fracture (Materials) , Fluids , Finite element analysis , Finite element model , Matlab , Modeling
Measurement of Elastic Follow-Up for Combined Applied and Residual Stresses
Graeme Horne, Matthew J. Peel, David J. Smith
PVP 2013; V005T11A020https://doi.org/10.1115/PVP2013-97624
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Relaxation (Physics) , Residual stresses , Stress , Deformation , Aluminum alloys , Cycles , Displacement , Friction
Evaluation of Mass Transfer Coefficient Under Swirl Flow Generated by the Combination of Pipe Elements: Part 2
Kei Yamamoto, Shota Suzuki, Takao Nakamura
PVP 2013; V005T11A021https://doi.org/10.1115/PVP2013-97657
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Flow (Dynamics) , Mass transfer , Pipes , Accidents , Friction , Geometry , Piping systems , Power stations , Simulation , Vortices
Fundamental Study on Health Monitoring for Pipe by Vibration Analysis
Shunsuke Kawazu, Satoshi Fujita, Keisuke Minagawa
PVP 2013; V005T11A022https://doi.org/10.1115/PVP2013-97739
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Pipes , Vibration analysis , Corrosion , Vibration , Accidents , Chemical processes , Damage , Erosion , Flow (Dynamics) , Industrial plants
Experimental Investigation on Minimum Design Metal Temperature of Q345R Steel
Xiangyu Shu, Jinyang Zheng, Binan Shou
PVP 2013; V005T11A023https://doi.org/10.1115/PVP2013-97763
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Design , Ductile-brittle transition , Impact testing , Metals , Steel , Temperature
A Method for Prediction of Forming Strain for Cold Stamping Formed Head Made of S30408 Austenitic Stainless Steel
Xiaobo Zhu, Cunjian Miao, Li Ma
PVP 2013; V005T11A024https://doi.org/10.1115/PVP2013-97768
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Metal stamping , Stainless steel , Deformation , Ductility , Finite element analysis , Low temperature , Plasticity , Safety
Improvement in Fatigue Limit by Shot Peening for High-Strength Steel Containing Crack-Like Surface Defect: Influence of Surface Crack Aspect Ratio
Makiko Nakagawa, Koji Takahashi, Toshio Osada
PVP 2013; V005T11A025https://doi.org/10.1115/PVP2013-97839
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Fatigue limit , Fracture (Materials) , High strength steel , Shot peening , Surface cracks , Stress , Fatigue testing
Application of Surface Roughness Parameters to the Evaluation of Low Cycle Fatigue Damage in Austenitic Stainless Steel
Nao Fujimura, Takashi Nakamura, Hiroyuki Oguma
PVP 2013; V005T11A026https://doi.org/10.1115/PVP2013-97887
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Damage , Damage assessment , Fracture (Materials) , Low cycle fatigue , Stainless steel , Surface roughness
Use of the Alternating Current Potential Drop (ACPD) Technique to Monitor Creep Behaviour of Austenitic Steels
Aditya Narayanan, Catrin M. Davies, Yasser K. Mahmoud
PVP 2013; V005T11A027https://doi.org/10.1115/PVP2013-97889
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Alternating current potential drop techniques , Creep , Steel , Damage , Deformation , Electrical resistivity , Sensors , Stainless steel , Strain sensors , Temperature
Development of a Protocol to Determine the Minimum Operating Stress of Compressed Non-Asbestos Gaskets
Ana C. Silva, Gabriele Rodrigues, Lucas Xavier
PVP 2013; V005T11A028https://doi.org/10.1115/PVP2013-97900
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Asbestos substitutes , Gaskets , Stress , Bolted flanges , Manufacturing , Leakage , Pressure
Numerical Analyses of Interaction Behavior of Multiple Surface Cracks Using a Modified Creep-Damage Model and Fracture Mechanics Approach
Jian-Feng Wen, Fu-Zhen Xuan, Shan-Tung Tu
PVP 2013; V005T11A029https://doi.org/10.1115/PVP2013-97982
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Creep , Damage , Fracture mechanics , Numerical analysis , Surface cracks , Fracture (Materials) , Finite element analysis , High temperature
Limit Loads for Circumferentially Cracked Pipes Under Combined Bending and Torsion With Tension
Ho-Wan Ryu, Jae-Jun Han, Yun-Jae Kim
PVP 2013; V005T11A030https://doi.org/10.1115/PVP2013-98102
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Pipes , Stress , Tension , Torsion , Fracture (Materials) , Membranes , ASME Boiler and Pressure Vessel Code , Finite element analysis , Finite element model , Power stations
Buckling of High-Strength Steel Cylinders Under Cyclic Bending in the Inelastic Range
George E. Varelis, Spyros A. Karamanos
PVP 2013; V005T11A031https://doi.org/10.1115/PVP2013-98159
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Buckling , Cylinders , High strength steel , Deformation , Steel , Computer simulation , Failure , Finite element analysis , Finite element model , Materials testing
All Years

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

  • Crossref Logo
  • Crossref Open Funder Registry Logo
  • Crossref Open Cited-By Logo
  • Crossref Crossmark Logo
  • Crossref Similarity Check Logo
  • Chorus Logo
  • Counter Logo
  • Cope Logo
  • STM Logo
Copyright © 2025 The American Society of Mechanical Engineers
Close Modal
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal
This site uses cookies. By continuing to use our website, you are agreeing to our privacy policy.
Accept