Volumes | Pressure Vessels and Piping Conference | American Society of Mechanical Engineers Digital Collection

Skip Nav Destination

Volume 3: Design and Analysis

Design and Analysis

CFD in Design and Analysis

A CFX Simulation of the OECD/NEA T-Junction Benchmark

Jay C. Gillis, Benoit P. Belley, Martin Romero

PVP 2013; V003T03A001https://doi.org/10.1115/PVP2013-97292

Abstract

View Articletitled, A CFX Simulation of the OECD/NEA T-Junction Benchmark

PDF

Topics: Junctions , Simulation , Computational fluid dynamics , Turbulence , Eddies (Fluid dynamics) , Flow (Dynamics) , Temperature , Boundary-value problems , Finite element analysis , Fluctuations (Physics)

Comparison of Metal Temperatures Obtained From Conjugate Heat Transfer CFD Analysis and Thermal Finite Element Analysis of a Valve

Gareth Bowie, Andrew Fletcher, Gary Reed, Lewis Davenport, Peter Hugill

PVP 2013; V003T03A002https://doi.org/10.1115/PVP2013-97467

Abstract

View Articletitled, Comparison of Metal Temperatures Obtained From Conjugate Heat Transfer CFD Analysis and Thermal Finite Element Analysis of a Valve

PDF

Topics: Computational fluid dynamics , Finite element analysis , Heat transfer , Metals , Temperature , Valves , Simulation , Fluids , Heat transfer coefficients , Relief valves

A Parametric CFD Analysis of the Valve Pocket Losses in Reciprocating Compressors

Francesco Balduzzi, Giovanni Ferrara, Riccardo Maleci, Alberto Babbini, Guido Pratelli

PVP 2013; V003T03A003https://doi.org/10.1115/PVP2013-97929

Abstract

View Articletitled, A Parametric CFD Analysis of the Valve Pocket Losses in Reciprocating Compressors

PDF

Topics: Compressors , Computational fluid dynamics , Valves , Geometry , Response surface methodology , Simulation , Cylinders , Dimensions , Ducts , Energy generation

Reduction of Stack Vortex Induced Vibrations

Sean M. McGuffie, Michael A. Porter

PVP 2013; V003T03A004https://doi.org/10.1115/PVP2013-97995

Abstract

View Articletitled, Reduction of Stack Vortex Induced Vibrations

PDF

Topics: Vortex-induced vibration , Design , Vibration , Computational fluid dynamics , Wind velocity , Maintenance , American Petroleum Institute , Computer simulation , Cracking (Materials) , Dampers

Composite Materials and Structures

Optimization in Polymer Composite Piping Design

Pierre Mertiny, Horst Baier

PVP 2013; V003T03A005https://doi.org/10.1115/PVP2013-97179

Abstract

View Articletitled, Optimization in Polymer Composite Piping Design

PDF

Topics: Composite materials , Fibers , Optimization , Piping design , Polymer composites

Uncertainty Analysis of a Cross-Ply Composite Cylinder Subject to External Pressure by Convex Modeling

Isaac Sfiso Radebe, Sarp Adali

PVP 2013; V003T03A006https://doi.org/10.1115/PVP2013-97896

Abstract

View Articletitled, Uncertainty Analysis of a Cross-Ply Composite Cylinder Subject to External Pressure by Convex Modeling

PDF

Topics: Composite materials , Cylinders , External pressure , Modeling , Uncertainty analysis , Buckling , Elastic constants , Pressure , Uncertainty , Computation

Numerical and Experimental Testing of Composite Rings for Reciprocating Compressor Valves

Claudio Annicchiarico, Alberto Babbini, Renzo Capitani, Pierluigi Tozzi

PVP 2013; V003T03A007https://doi.org/10.1115/PVP2013-97984

Abstract

View Articletitled, Numerical and Experimental Testing of Composite Rings for Reciprocating Compressor Valves

PDF

Topics: Composite materials , Compressors , Testing , Valves , Failure , Anisotropy , Computer simulation , Design , Failure mechanisms , Fibers

Design and Analysis of Piping and Piping Components

Comparison Between Full System Hydrotest and Local Hydrotest Methods for Pipe Butt Welds

Warren Brown

PVP 2013; V003T03A008https://doi.org/10.1115/PVP2013-97182

Abstract

View Articletitled, Comparison Between Full System Hydrotest and Local Hydrotest Methods for Pipe Butt Welds

PDF

Topics: Pipes , Welded joints , Stress , Finite element analysis , Flanges , Leakage , Piping systems , Strain gages , Welding

BWR Steam Dryer Issues and Lessons Learned Related to Flow Induced Vibration

Chakrapani Basavaraju, Kamal A. Manoly, Martin C. Murphy, William T. Jessup

PVP 2013; V003T03A009https://doi.org/10.1115/PVP2013-97218

Abstract

View Articletitled, BWR Steam Dryer Issues and Lessons Learned Related to Flow Induced Vibration

PDF

Topics: Boiling water reactors , Flow-induced vibrations , Steam , Dryers , Power uprate , Safety , Design , Nuclear power stations , Thermal energy , ASME Boiler and Pressure Vessel Code

Stress Intensification Factors for Fabricated Lateral Piping Connections

David Mair

PVP 2013; V003T03A010https://doi.org/10.1115/PVP2013-97220

Abstract

View Articletitled, Stress Intensification Factors for Fabricated Lateral Piping Connections

PDF

Topics: Pipes , Stress , Finite element analysis , Engineers , Junctions

Analysis of ASME Class 3 Buried HDPE Piping Systems Related to Code Case N-755-1

Young Seok Kim, Jung Kwang Yoon, Young Ho Kim

PVP 2013; V003T03A011https://doi.org/10.1115/PVP2013-97226

Abstract

View Articletitled, Analysis of ASME Class 3 Buried HDPE Piping Systems Related to Code Case N-755-1

PDF

Topics: Piping systems , Pipes , Stress , ASME Standards , Design , Nuclear power stations , Density , Ductility , Earthquakes , Engineering standards

Parametric Study of the Coupling Power Factor for the Statistical Energy Analysis of Piping Acoustic Vibration

Ahmed H. Dweib

PVP 2013; V003T03A012https://doi.org/10.1115/PVP2013-97512

Abstract

View Articletitled, Parametric Study of the Coupling Power Factor for the Statistical Energy Analysis of Piping Acoustic Vibration

PDF

Topics: Acoustics , Pipes , Vibration , Pressure , Flow (Dynamics) , Piping systems , Seas , Fatigue life , Finite element model , Fluids

A Predictive Model for Gas Flow Through a Bore-Piston Ring Contact

Baptiste Hallouin, Didier Lasseux

PVP 2013; V003T03A013https://doi.org/10.1115/PVP2013-97583

Abstract

View Articletitled, A Predictive Model for Gas Flow Through a Bore-Piston Ring Contact

PDF

Topics: Gas flow , Pistons , Computer simulation , Compressible flow , Flow (Dynamics) , Inertia (Mechanics) , Machinery , Momentum , Shapes

AIV Evaluation With Sound Pressure and Fabrication Quality Standards

J. Adin Mann, III, Allen C. Fagerlund, Daniel Eilers

PVP 2013; V003T03A014https://doi.org/10.1115/PVP2013-97599

Abstract

View Articletitled, AIV Evaluation With Sound Pressure and Fabrication Quality Standards

PDF

Topics: Manufacturing , Sound pressure , Noise (Sound) , Vibration , Acoustics , Approximation , Damage , Design , Engineering standards , Fatigue failure

Deformation of a Pipe Bend as an Element of a Piping System Under Harmonic Loading

Anatolii Batura, Igor Orynyak, Sergii Radchenko, Mykhaylo Borodii

PVP 2013; V003T03A015https://doi.org/10.1115/PVP2013-97619

Abstract

View Articletitled, Deformation of a Pipe Bend as an Element of a Piping System Under Harmonic Loading

PDF

Topics: Deformation , Pipe bends , Pipes , Piping systems , Vibration

Stress Analysis of Pipe Support Attachments: A Comparison of Analytical Methods and Finite Element Analysis for Circular and Non-Circular Attachments

Anindya Bhattacharya

PVP 2013; V003T03A016https://doi.org/10.1115/PVP2013-97622

Abstract

View Articletitled, Stress Analysis of Pipe Support Attachments: A Comparison of Analytical Methods and Finite Element Analysis for Circular and Non-Circular Attachments

PDF

Topics: Analytical methods , Finite element analysis , Pipes , Stress analysis (Engineering) , Design , Boundary-value problems , Welding research

Conceptual Design of a Spiral Wound Pipeline With Manufactured Residual Stresses

Colin Scott, Shane Finneran

PVP 2013; V003T03A017https://doi.org/10.1115/PVP2013-97638

Abstract

View Articletitled, Conceptual Design of a Spiral Wound Pipeline With Manufactured Residual Stresses

PDF

Topics: Conceptual design , Pipelines , Residual stresses , Pipes , Deflection , Design , Fracture (Materials) , Steel , Stress , Welding

A Direct Evaluation of Plastic Shakedown Limit of a Piping Nozzle Structure Under Superposed Multiple Loadings

Geng Chen, Jaan-Willem Simon, Dieter Weichert

PVP 2013; V003T03A018https://doi.org/10.1115/PVP2013-97666

Abstract

View Articletitled, A Direct Evaluation of Plastic Shakedown Limit of a Piping Nozzle Structure Under Superposed Multiple Loadings

PDF

Topics: Nozzles , Pipes , Stress , Algorithms , Optimization , Pressure , Theorems (Mathematics)

Calculation Approach of Optimum Cutting Surfaces of Extra Length of Pipe Spools

Takashi Kitahara, Yuichi Yamamoto, Yasutaka Tagawa

PVP 2013; V003T03A019https://doi.org/10.1115/PVP2013-97689

Abstract

View Articletitled, Calculation Approach of Optimum Cutting Surfaces of Extra Length of Pipe Spools

PDF

Topics: Cutting , Pipes , Algorithms , Construction , Modeling , Power stations

Triaxial Residual Stresses in Thermomechanically Rolled Seamless Tubes Characterized by High-Energy Synchrotron X-Ray Diffraction

Gerald Winter, Mario Stefenelli, Juergen Klarner, Peter Staron, Torben Fischer, Jozef Keckes, Bruno Buchmayr

PVP 2013; V003T03A020https://doi.org/10.1115/PVP2013-97963

Abstract

View Articletitled, Triaxial Residual Stresses in Thermomechanically Rolled Seamless Tubes Characterized by High-Energy Synchrotron X-Ray Diffraction

PDF

Topics: Residual stresses , X-ray diffraction , Stress , Compressive stress , Cooling , Design , Exterior walls , Mechanical stability , Photons , Process control

Brittle Fracture Assessments on Offshore Piping Systems

Kannan Subramanian, Jorge Penso, Graham McVinnie, Greg Garic

PVP 2013; V003T03A021https://doi.org/10.1115/PVP2013-98013

Abstract

View Articletitled, Brittle Fracture Assessments on Offshore Piping Systems

PDF

Topics: Brittle fracture , Underwater pipelines , Low temperature , American Petroleum Institute , Pipes , Piping systems , Stress analysis (Engineering) , Temperature , Valves , Construction

Evaluation of Welding Residual Stress in GTAW Tubular Welds

Hyung-Kook Jin, Ha-Geun Kim, Sang-Beom Shin

PVP 2013; V003T03A022https://doi.org/10.1115/PVP2013-98086

Abstract

View Articletitled, Evaluation of Welding Residual Stress in GTAW Tubular Welds

PDF

Topics: Gas tungsten arc welding , Stress , Welded joints , Welding , Finite element analysis , Heat , Shapes , Temperature , Thermomechanics , Tungsten

Design and Analysis of Bolted Joints

Assessing Flanged Joint Leakage and Tube-to-Tubesheet Joint Failure due to Fluid Temperature Differentials in a Floating Head Heat Exchanger Using Finite Element Analysis

Phillip E. Prueter, Brian Macejko, David J. Dewees, Robert G. Brown

PVP 2013; V003T03A023https://doi.org/10.1115/PVP2013-97576

Abstract

View Articletitled, Assessing Flanged Joint Leakage and Tube-to-Tubesheet Joint Failure due to Fluid Temperature Differentials in a Floating Head Heat Exchanger Using Finite Element Analysis

PDF

Topics: Failure , Finite element analysis , Fluids , Heat exchangers , Leakage , Temperature , Gaskets , Deflection , Flanges , Heat transfer

Pressure Energized Gasket (PEG) Behavior and Seating Stress

David Reeves, Mark Ruffin

PVP 2013; V003T03A024https://doi.org/10.1115/PVP2013-97594

Abstract

View Articletitled, Pressure Energized Gasket (PEG) Behavior and Seating Stress

PDF

Topics: Gaskets , Pressure , Stress , Temperature

Dissecting the Dinosaur; Problems With B16.5 and B16.47 Flange Standards

Warren Brown

PVP 2013; V003T03A025https://doi.org/10.1115/PVP2013-97813

Abstract

View Articletitled, Dissecting the Dinosaur; Problems With B16.5 and B16.47 Flange Standards

PDF

Topics: Flanges , ASME Standards , Design , Failure , Leakage

Improved Analysis of External Loads on Flanged Joints

Warren Brown

PVP 2013; V003T03A026https://doi.org/10.1115/PVP2013-97814

Abstract

View Articletitled, Improved Analysis of External Loads on Flanged Joints

PDF

Topics: Stress , Pipes , Leakage , Pressure vessels , Pipe joints , Pressure , Probability , Risk , Safety

Assembler Qualification and General Revisions for ASME PCC-1-2013

Warren Brown, Clyde Neely, Clay Rodery

PVP 2013; V003T03A027https://doi.org/10.1115/PVP2013-97816

Abstract

View Articletitled, Assembler Qualification and General Revisions for ASME PCC-1-2013

PDF

Assembly of Gasketed Bolted Flange Joints Using Torque Control of Preload Method: FEA Approach

Muhammad Abid, Yasir Mehmood Khan, David H. Nash

PVP 2013; V003T03A028https://doi.org/10.1115/PVP2013-97863

Abstract

View Articletitled, Assembly of Gasketed Bolted Flange Joints Using Torque Control of Preload Method: FEA Approach

PDF

Topics: Bolted flanges , Finite element analysis , Manufacturing , Torque control , Flanges , Stress , Electromagnetic scattering , Gaskets , Rotation , Torque

Working Bolts Near to Yield: Theory, Experience and Recommended Practice

Robert Noble

PVP 2013; V003T03A029https://doi.org/10.1115/PVP2013-97956

Abstract

View Articletitled, Working Bolts Near to Yield: Theory, Experience and Recommended Practice

PDF

Topics: Acoustical engineering , Alloys , Bolted flanges , Corrosion , Electromagnetic scattering , Leakage , Manufacturing , Pressure , Stress , Tension

Design Considerations: Torque or Tension — Advantages and Disadvantages

Robert Noble

PVP 2013; V003T03A030https://doi.org/10.1115/PVP2013-98002

Abstract

View Articletitled, Design Considerations: Torque or Tension — Advantages and Disadvantages

PDF

Topics: Design , Tension , Torque , Stress , Electromagnetic scattering , Safety , Tooling

Fatigue

Cyclic Fatigue in Metal Bellows

Scott Stelmar

PVP 2013; V003T03A031https://doi.org/10.1115/PVP2013-97026

Abstract

View Articletitled, Cyclic Fatigue in Metal Bellows

PDF

Topics: Bellows (Equipment) , Metal fatigue , Metals , Engineers , Fatigue life , Alloys , ASME Boiler and Pressure Vessel Code , Bellows expansion joints , Computational methods , Design

Prediction of the Inner Temperatures in a Duct Based on Outer Thermocouples Measurements

Stéphane Gervais, Alexandre Girard

PVP 2013; V003T03A032https://doi.org/10.1115/PVP2013-97048

Abstract

View Articletitled, Prediction of the Inner Temperatures in a Duct Based on Outer Thermocouples Measurements

PDF

Topics: Ducts , Temperature , Thermocouples , Computation , Fluids , Nuclear power stations , Algorithms , Approximation , Fatigue , Fatigue damage

Experimental Evaluation of Fatigue Life of Coke Drum Materials With Weld Sections

Jie Chen, Toshiya Yamamoto, Zihui Xia, Keiji Esaki

PVP 2013; V003T03A033https://doi.org/10.1115/PVP2013-97095

Abstract

View Articletitled, Experimental Evaluation of Fatigue Life of Coke Drum Materials With Weld Sections

PDF

Topics: Coke , Fatigue life , Damage , Fracture (Materials) , Fracture (Process) , Shells , Temperature , Yield strength , Design , Durability

Crack Initiation Under Equibiaxial Fatigue, Development of a Particular Equibiaxial Fatigue Device

S. Bradaï, C. Gourdin, S. Courtin, J. C. Leroux, C. Gardin

PVP 2013; V003T03A034https://doi.org/10.1115/PVP2013-97200

Abstract

View Articletitled, Crack Initiation Under Equibiaxial Fatigue, Development of a Particular Equibiaxial Fatigue Device

PDF

Topics: Fatigue , Fracture (Materials) , Fatigue life , Collaboration , Design , Fatigue damage , Finite element analysis , In-service inspection , Modeling , Nuclear power stations

Influence of Variable Amplitude Fatigue Loading on AISI 304L Stainless Steel

Anne-Lise Gloanec, Aqmal Syafiq Anis, Stéphan Courtin

PVP 2013; V003T03A035https://doi.org/10.1115/PVP2013-97243

Abstract

View Articletitled, Influence of Variable Amplitude Fatigue Loading on AISI 304L Stainless Steel

PDF

Topics: Fatigue , Stainless steel , Signals , Shapes , Cycles , Fatigue cracks , Fatigue life , Fracture (Materials) , Fracture (Process) , Low cycle fatigue

High Frequency Statistical Energy Analysis Applied to Fluid Filled Pipe Systems

Pieter J. G. van Beek, Jan P. M. Smeulers

PVP 2013; V003T03A036https://doi.org/10.1115/PVP2013-97280

Abstract

View Articletitled, High Frequency Statistical Energy Analysis Applied to Fluid Filled Pipe Systems

PDF

Topics: Fluids , Pipes , Acoustics , Seas , Turbulence , Finite element model , Vibration , Excitation , Fatigue , Fatigue failure

A Conservative Damage Accumulation Method for the Prediction of Crack Nucleation Under Variable Amplitude Loading for Austenitic Stainless Steel

Said Taheri, Ludovic Vincent, Jean C. Leroux

PVP 2013; V003T03A037https://doi.org/10.1115/PVP2013-97284

Abstract

View Articletitled, A Conservative Damage Accumulation Method for the Prediction of Crack Nucleation Under Variable Amplitude Loading for Austenitic Stainless Steel

PDF

Topics: Damage , Fatigue damage , Fracture (Materials) , Hardening , Nucleation (Physics) , Stainless steel , Stress

The Qualification of BWR Steam Dryer Weldments Exposed to Cyclic Loading Using Finite Element Methods

Michael R. Breach

PVP 2013; V003T03A038https://doi.org/10.1115/PVP2013-97503

Abstract

View Articletitled, The Qualification of BWR Steam Dryer Weldments Exposed to Cyclic Loading Using Finite Element Methods

PDF

Topics: Boiling water reactors , Finite element methods , Steam , Stress , Failure , Welded joints , Bricks , Cycles , Equilibrium (Physics) , Fatigue

Investigations on Crack Propagation Under Cyclical Isothermal and Thermo-Mechanical Loadings for a Type 304-L Stainless Steel Used for Pressurized Water Reactor

C. Gourdin, F. Rossillon, P. Le Delliou, G. Perez, A. Fissolo

PVP 2013; V003T03A039https://doi.org/10.1115/PVP2013-97510

Abstract

View Articletitled, Investigations on Crack Propagation Under Cyclical Isothermal and Thermo-Mechanical Loadings for a Type 304-L Stainless Steel Used for Pressurized Water Reactor

PDF

Topics: Crack propagation , Pressurized water reactors , Stainless steel , Thermomechanics

Development and Validation of Inverse Analysis of Heat Conduction and Thermal Stress for Elbow: Part II

Kiminobu Hojo, Mayumi Ochi, Seiji Ioka, Shiro Kubo

PVP 2013; V003T03A040https://doi.org/10.1115/PVP2013-97620

Abstract

View Articletitled, Development and Validation of Inverse Analysis of Heat Conduction and Thermal Stress for Elbow: Part II

PDF

Topics: Heat conduction , Thermal stresses , Temperature , Thermal stratification , Finite element analysis , Fluids , Pipes , Pressure , Stress , Stress concentration

Analysis of Multi-Axial Fatigue Test Data Using a Path-Dependent Effective Stress/Strain Definition

Zhigang Wei, Pingsha Dong, Romesh C. Batra, Kamran Nikbin

PVP 2013; V003T03A041https://doi.org/10.1115/PVP2013-97630

Abstract

View Articletitled, Analysis of Multi-Axial Fatigue Test Data Using a Path-Dependent Effective Stress/Strain Definition

PDF

Topics: Fatigue testing , Stress , Cycles , Fatigue damage , Fatigue life , Aerospace industry , Crack propagation , Energy generation , Energy industry , Exhaust systems

Development of a Model for Low-Cycle Fatigue Assessment of 347 SS Butt-Welded Joints

Eliane Lang, Jürgen Rudolph, Heinz Thomas Beier, Michael Vormwald

PVP 2013; V003T03A042https://doi.org/10.1115/PVP2013-97705

Abstract

View Articletitled, Development of a Model for Low-Cycle Fatigue Assessment of 347 SS Butt-Welded Joints

PDF

Topics: Low cycle fatigue , Computer simulation , Design , Fatigue , Fatigue testing , Geometry , Modeling , Resolution (Optics) , Stainless steel , Stress

Estimation of Stress Ratio From Striation’s Three-Dimensional Geometry

Kenta Yamagiwa, Tetsuya Sasaki

PVP 2013; V003T03A043https://doi.org/10.1115/PVP2013-97777

Abstract

View Articletitled, Estimation of Stress Ratio From Striation’s Three-Dimensional Geometry

PDF

Topics: Geometry , Stress , Fracture (Materials) , Steel , Aluminum , Carbon , Fatigue , Fatigue testing , Lasers , Microscopes

Overview of the Fatigue Design Discussions in the United States From These Past 10 Years

Harry Harrison, Robert Gurdal

PVP 2013; V003T03A044https://doi.org/10.1115/PVP2013-97787

Abstract

View Articletitled, Overview of the Fatigue Design Discussions in the United States From These Past 10 Years

PDF

Topics: Fatigue design , ASME Standards , Fatigue , Fatigue testing

Development of Inverse Analysis of Heat Conduction and Thermal Stress for Elbow: Part I

Seiji Ioka, Shiro Kubo, Mayumi Ochi, Kiminobu Hojo

PVP 2013; V003T03A045https://doi.org/10.1115/PVP2013-97883

Abstract

View Articletitled, Development of Inverse Analysis of Heat Conduction and Thermal Stress for Elbow: Part I

PDF

Topics: Heat conduction , Thermal stresses , Temperature , Pipes , Databases , Stratified flow , Transfer functions , Engineering simulation , Fatigue , Fatigue damage

Fitness for Service Evaluations and Post Construction Issues

A LEFM Based Study on the Interaction Between an Edge and an Embedded Parallel Crack

Q. Ma, C. Levy, M. Perl

PVP 2013; V003T03A046https://doi.org/10.1115/PVP2013-97083

Abstract

View Articletitled, A LEFM Based Study on the Interaction Between an Edge and an Embedded Parallel Crack

PDF

Topics: Fracture (Materials) , Separation (Technology) , Fitness-for-service , Stress , Fracture mechanics

Comparison of the Limit Loads Between Defected Pressure Pipes With an Internal Pit and an External Pit at High Temperature

Changyu Zhou, Bo Wang, Zhigang Sun, Jilin Xue, Xiaohua He

PVP 2013; V003T03A047https://doi.org/10.1115/PVP2013-97084

Abstract

View Articletitled, Comparison of the Limit Loads Between Defected Pressure Pipes With an Internal Pit and an External Pit at High Temperature

PDF

Topics: High temperature , Pressure pipes , Stress , Pipes , Dimensions , High pressure (Physics) , High temperature creep , Nuclear power stations , Petroleum , Power stations

Damage-Based Modeling and Analysis of Reactor Vessels With Numerous Base Metal Ultrasonic Indications

Joseph Y. R. Rashid, Timothy Hardin, Mark M. Rashid, Robert S. Dunham, Keith Kubischta

PVP 2013; V003T03A048https://doi.org/10.1115/PVP2013-97116

Abstract

View Articletitled, Damage-Based Modeling and Analysis of Reactor Vessels With Numerous Base Metal Ultrasonic Indications

PDF

Topics: Base metals , Damage , Modeling , Reactor vessels , Vessels , Failure , Hydrogen , Density , Cladding systems (Building) , Geometry

Fracture Integrity Assessment of Flawed Bi-Metallic Girth Weld Joint

Nicola Bonora, Antonio Carlucci, Andrew Ruggiero, Gianluca Iannitti

PVP 2013; V003T03A049https://doi.org/10.1115/PVP2013-97276

Abstract

View Articletitled, Fracture Integrity Assessment of Flawed Bi-Metallic Girth Weld Joint

PDF

Topics: Fracture (Materials) , Computer simulation , Finite element analysis , Stress

Evaluating Fitness-for-Service Assessment Procedures for Pressurized Components Subject to Local Thin Areas Near Structural Discontinuities

Phillip E. Prueter, David J. Dewees, Robert G. Brown

PVP 2013; V003T03A050https://doi.org/10.1115/PVP2013-97575

Abstract

View Articletitled, Evaluating Fitness-for-Service Assessment Procedures for Pressurized Components Subject to Local Thin Areas Near Structural Discontinuities

PDF

Topics: Fitness-for-service , American Petroleum Institute , Finite element model , Materials properties , Metals , Pressure , Stress

Study of Prolonged Service Degradation of Superheater Tubes and its Effects on Remaining Life Predictions

Khalid A. Al-Obaidi, Nesar Merah

PVP 2013; V003T03A051https://doi.org/10.1115/PVP2013-97713

Abstract

View Articletitled, Study of Prolonged Service Degradation of Superheater Tubes and its Effects on Remaining Life Predictions

PDF

Topics: Superheaters , Boiler tubes , Failure , Heating boilers , Materials degradation , Performance , Petrochemicals , Rupture , Steam , Stress

Development of Plastic Collapse Assessment Procedure for Cylindrical Vessels With a Local Thin Area Near a Nozzle Under Internal Pressure

Kenji Oyamada, Shinji Konosu, Tadashi Horibe, Kenta Ogasawara, Tetsuji Miyashita, Takashi Ohno

PVP 2013; V003T03A052https://doi.org/10.1115/PVP2013-97913

Abstract

View Articletitled, Development of Plastic Collapse Assessment Procedure for Cylindrical Vessels With a Local Thin Area Near a Nozzle Under Internal Pressure

PDF

Topics: Collapse , Nozzles , Pressure , Vessels , Stress , Finite element analysis , Stress concentration , Dimensions , Pressure vessels

Analysis of the Stress Basis to Use for Creep Evaluation of Pipelines in Fitness-for-Service Assessments

Lorenzo Scano

PVP 2013; V003T03A053https://doi.org/10.1115/PVP2013-98048

Abstract

View Articletitled, Analysis of the Stress Basis to Use for Creep Evaluation of Pipelines in Fitness-for-Service Assessments

PDF

Topics: Creep , Fitness-for-service , Pipelines , Stress , Pipes , American Petroleum Institute , Damage , Design , Finite element model , Plasticity

Improvements in Adapting m_α-Tangent Method for Fitness for Service Evaluation of Local Thin Areas in Storage Tanks

Sridhar Sathyanarayanan, Seshu M. R. Adluri

PVP 2013; V003T03A054https://doi.org/10.1115/PVP2013-98068

Abstract

View Articletitled, Improvements in Adapting mα-Tangent Method for Fitness for Service Evaluation of Local Thin Areas in Storage Tanks

PDF

Topics: Corrosion , Damage , Fitness-for-service , Storage tanks , Stress

Local Thin Areas Adjacent to Other Local Thin Areas in API-579/ASME FFS-1

Charles Becht, V, Greg Epremian, Eileen Chant, J. Robert Sims, Derrick Pease

PVP 2013; V003T03A055https://doi.org/10.1115/PVP2013-98169

Abstract

View Articletitled, Local Thin Areas Adjacent to Other Local Thin Areas in API-579/ASME FFS-1

PDF

Topics: American Petroleum Institute , Fitness-for-service , Collapse , Pressure , Bending (Stress) , Failure , Finite element analysis , Pressure vessels , Wall thickness

Fracture

Effects of Temperature Changes on Creep Crack Growth for a Low Alloy Butt Weld

Jinhua Shi

PVP 2013; V003T03A056https://doi.org/10.1115/PVP2013-97010

Abstract

View Articletitled, Effects of Temperature Changes on Creep Crack Growth for a Low Alloy Butt Weld

PDF

Topics: Alloys , Creep , Fracture (Materials) , Temperature effects , Temperature , Welding , High temperature , Residual stresses , Welded joints , Metals

Validating the Mechanical Nature of the Test Speicmen Thickness Effect on Fracture Toughness in the Transition Temperature Region

Toshiyuki Meshii, Kai Lu, Ryota Takamura

PVP 2013; V003T03A057https://doi.org/10.1115/PVP2013-97153

Abstract

View Articletitled, Validating the Mechanical Nature of the Test Speicmen Thickness Effect on Fracture Toughness in the Transition Temperature Region

PDF

Topics: Fracture toughness , Phase transition temperature , Finite element analysis , ASTM International , Fracture (Materials)

Benchmark on Residual Stress Modeling in Fracture Mechanics Assessment

S. Marie, H. Deschanels, S. Chapuliot, P. Le Delliou

PVP 2013; V003T03A058https://doi.org/10.1115/PVP2013-97177

Abstract

View Articletitled, Benchmark on Residual Stress Modeling in Fracture Mechanics Assessment

PDF

Topics: Computer simulation , Databases , Finite element analysis , Fracture (Materials) , Fracture mechanics , Manufacturing , Modeling , Pipes , Pressure , Residual stresses

Comparison of PTS Guides for Reactor Pressure Vessel Integrity Assessment

Milan Brumovsky

PVP 2013; V003T03A059https://doi.org/10.1115/PVP2013-97342

Abstract

View Articletitled, Comparison of PTS Guides for Reactor Pressure Vessel Integrity Assessment

PDF

Topics: Reactor vessels , Fracture mechanics , ASME Standards , Cooling , Emergencies , Materials degradation , Materials properties , Nuclear power stations , Safety , Testing

COD of Off-Centered Cracks in Pipes Under Bending: Experimental Measures and Model Validation

D. Gentile, G. Iannitti, N. Bonora

PVP 2013; V003T03A060https://doi.org/10.1115/PVP2013-97347

Abstract

View Articletitled, COD of Off-Centered Cracks in Pipes Under Bending: Experimental Measures and Model Validation

PDF

Topics: Fracture (Materials) , Model validation , Pipes , Leakage

Comparison of Flaw Driving Force Estimates in Simulated Weld Residual Stress Fields

David J. Dewees, Robert H. Dodds, Jr.

PVP 2013; V003T03A061https://doi.org/10.1115/PVP2013-97410

Abstract

View Articletitled, Comparison of Flaw Driving Force Estimates in Simulated Weld Residual Stress Fields

PDF

Topics: Stress , Fracture (Materials) , Displacement , Modeling

The Brittle Strength Assessment of WWER-1000 Reactor Pressure Vessel Nozzle With Cladding

Andrii Oryniak, Sergii Radchenko, Igor Orynyak

PVP 2013; V003T03A062https://doi.org/10.1115/PVP2013-97561

Abstract

View Articletitled, The Brittle Strength Assessment of WWER-1000 Reactor Pressure Vessel Nozzle With Cladding

PDF

Topics: Brittleness , Cladding systems (Building) , Nozzles , Reactor vessels , Fracture (Materials) , Stress , Temperature , Finite element methods , Finite element model , Fracture toughness

Stress Intensity Factors for Axial Cracks in Pressurized Cylindrical Elements Using the Boundary Element Method

Marco Gonzalez, Manuel Martinez

PVP 2013; V003T03A063https://doi.org/10.1115/PVP2013-97670

Abstract

View Articletitled, Stress Intensity Factors for Axial Cracks in Pressurized Cylindrical Elements Using the Boundary Element Method

PDF

Topics: Boundary element methods , Fracture (Materials) , Stress , Modeling , American Petroleum Institute , Crack propagation , Failure , Integral equations , Mechanical behavior , Numerical analysis

Determination of the Transition Temperature Scatter Using the Charpy Data Scatter

Igor Orynyak, Maksym Zarazovskii, Andrii Bogdan

PVP 2013; V003T03A064https://doi.org/10.1115/PVP2013-97697

Abstract

View Articletitled, Determination of the Transition Temperature Scatter Using the Charpy Data Scatter

PDF

Topics: Electromagnetic scattering , Phase transition temperature , Impact testing , Metals , Accounting , Nuclear power stations , Pressure vessels , Surveillance , Temperature

To Determination of the WWER RPV Steels Crack Resistance Characteristics

Igor Orynyak, Maksym Zarazovskii, Sergii Radchenko, Volodymyr Kozlov

PVP 2013; V003T03A065https://doi.org/10.1115/PVP2013-97742

Abstract

View Articletitled, To Determination of the WWER RPV Steels Crack Resistance Characteristics

PDF

Topics: Fracture (Materials) , Steel , Fracture toughness , Phase transition temperature , Temperature , ASTM International , Base metals , Brittle fracture , Forging , Nuclear power stations

Brittle Fracture Analysis of a Dissimilar Metal Weld

A. Blouin, S. Chapuliot, S. Marie, J. M. Bergheau, C. Niclaeys

PVP 2013; V003T03A066https://doi.org/10.1115/PVP2013-97961

Abstract

View Articletitled, Brittle Fracture Analysis of a Dissimilar Metal Weld

PDF

Topics: Brittle fracture , Metals , Pipes , Stress , Brittleness , Alloys , Base metals , Fracture (Materials) , Heat , Probability

Inelastic, Nonlinear Analysis, and Limit Load Analysis

A New Constitutively Accurate Lower Bound Direct Shakedown Method

Alan Jappy, Donald Mackenzie, Haofeng Chen

PVP 2013; V003T03A067https://doi.org/10.1115/PVP2013-97049

Abstract

View Articletitled, A New Constitutively Accurate Lower Bound Direct Shakedown Method

PDF

Topics: Design , Finite element analysis , Plasticity , Pressure vessels , Safety , Stress

Displacement Based Failure Criterion Applicable to Finite Element Analysis Results for Wall-Thinned Pipes Under Pressure Load

Toshiyuki Meshii, Kan Yoshii

PVP 2013; V003T03A068https://doi.org/10.1115/PVP2013-97161

Abstract

View Articletitled, Displacement Based Failure Criterion Applicable to Finite Element Analysis Results for Wall-Thinned Pipes Under Pressure Load

PDF

Topics: Displacement , Failure , Finite element analysis , Pipes , Pressure , Stress , Fracture (Materials) , Fracture (Process) , Displacement measurement , Image processing

Damage Modeling of the Load-Bearing Capacity of Damaged Steam Generator Tubes in Nuclear Power Plants

Xaver Schuler, Michael Seidenfuss, Sarah Gehrlicher, Jan Mahlke

PVP 2013; V003T03A069https://doi.org/10.1115/PVP2013-97196

Abstract

View Articletitled, Damage Modeling of the Load-Bearing Capacity of Damaged Steam Generator Tubes in Nuclear Power Plants

PDF

Topics: Boilers , Damage , Load bearing capacity , Modeling , Nuclear power stations , Fracture (Materials) , Fracture mechanics , Safety , Stress corrosion cracking , Temperature

Simplified Thermo-Elasto-Plastic Analysis Models for Determination of Global and Local Stresses in Coke Drums

Yanxiang Zhang, Zihui Xia

PVP 2013; V003T03A070https://doi.org/10.1115/PVP2013-97296

Abstract

View Articletitled, Simplified Thermo-Elasto-Plastic Analysis Models for Determination of Global and Local Stresses in Coke Drums

PDF

Topics: Coke , Stress

Buckling of Cylinders With Imperfect Length

J. Błachut

PVP 2013; V003T03A071https://doi.org/10.1115/PVP2013-97316

Abstract

View Articletitled, Buckling of Cylinders With Imperfect Length

PDF

Topics: Buckling , Cylinders , Compression , Steel , Stress , Wall thickness , Waves

Shakedown Boundary and Limit Load Determination of a 90-Degree Back to Back Pipe Bend Subjected to Steady Internal Perssures and Cyclic In-Plane Bending Moments

Hany F. Abdalla

PVP 2013; V003T03A072https://doi.org/10.1115/PVP2013-97336

Abstract

View Articletitled, Shakedown Boundary and Limit Load Determination of a 90-Degree Back to Back Pipe Bend Subjected to Steady Internal Perssures and Cyclic In-Plane Bending Moments

PDF

Topics: Pipe bends , Stress , Pipes , Aircraft engines , Engineering simulation , Finite element analysis , Geometry , Liquefied natural gas , Performance , Pipe sizes

Failure Assessment of Pipe Tee Element Using Continuum Damage Mechanics

Nicola Bonora, Domenico Gentile, Andrew Ruggiero, Gabriel Testa, Paolo Folgarait, Andrea Calatroni

PVP 2013; V003T03A073https://doi.org/10.1115/PVP2013-97344

Abstract

View Articletitled, Failure Assessment of Pipe Tee Element Using Continuum Damage Mechanics

PDF

Topics: Damage mechanics , Failure , Pipes , Rupture , Damage , Computer simulation , Electromagnetic scattering , Failure data , Fittings , Pipe flow

Classification of Thin-Walled Conical Vessels for Design Against Axisymmetric Plastic Collapse Under External Pressure

Patrick Meehan, Robert Frith

PVP 2013; V003T03A074https://doi.org/10.1115/PVP2013-97603

Abstract

View Articletitled, Classification of Thin-Walled Conical Vessels for Design Against Axisymmetric Plastic Collapse Under External Pressure

PDF

Topics: Collapse , Design , External pressure , Vessels , Buckling , Cylinders , Geometry , Junctions , Safety engineering

The Application of Combined Buckling Mode Imperfections on Shell Structures

Sean Laird, Robert Frith

PVP 2013; V003T03A075https://doi.org/10.1115/PVP2013-97649

Abstract

View Articletitled, The Application of Combined Buckling Mode Imperfections on Shell Structures

PDF

Topics: Buckling , Shells , External pressure , Mode shapes , Pressure , Design methodology , Geometry , Manufacturing , Plastics , Testing

Application of Gurson Model to Ni-Based Alloy Weld Joint Pipe With an Axial or a Circumferential Surface Flaw: Phase II

Kiminobu Hojo, Daigo Watanabe

PVP 2013; V003T03A076https://doi.org/10.1115/PVP2013-97654

Abstract

View Articletitled, Application of Gurson Model to Ni-Based Alloy Weld Joint Pipe With an Axial or a Circumferential Surface Flaw: Phase II

PDF

Topics: Alloys , Pipes , Fracture (Materials) , Fittings , Metals , Stress , Welded joints

Limit Analysis Interaction Formulae for Thin-Walled and Moderately Thick-Walled Pipes Subjected to Pressure and Pipe Bending

Mikael Möller, Lars Hallin, Milan Veljkovic

PVP 2013; V003T03A077https://doi.org/10.1115/PVP2013-97946

Abstract

View Articletitled, Limit Analysis Interaction Formulae for Thin-Walled and Moderately Thick-Walled Pipes Subjected to Pressure and Pipe Bending

PDF

Topics: Pipe bending , Pipes , Pressure , Stress , ASME Standards , Membranes , Bending (Stress) , Collapse , Finite element analysis , Hoop stress

Ratchet Boundary of a Beam With Arbitrary Cross Section

R. Adibi-Asl, W. Reinhardt

PVP 2013; V003T03A078https://doi.org/10.1115/PVP2013-98084

Abstract

View Articletitled, Ratchet Boundary of a Beam With Arbitrary Cross Section

PDF

Topics: Cross section (Physics) , Membranes , Pipes , Stress , Theorems (Mathematics)

The Shakedown Boundary for Parabolic Stress Distribution in NB-3222.5

W. Reinhardt, A. Asadkarami

PVP 2013; V003T03A079https://doi.org/10.1115/PVP2013-98090

Abstract

View Articletitled, The Shakedown Boundary for Parabolic Stress Distribution in NB-3222.5

PDF

Topics: Finite element model , Membranes , Polynomials , Steady state , Stress , Stress concentration , Temperature distribution , Temperature gradient , Thermal stresses

Factors Affecting Steam Generator Tube Bow

Moli Cao, Jennifer Nelson, Hasan Charkas, Timothy Wiger

PVP 2013; V003T03A080https://doi.org/10.1115/PVP2013-98160

Abstract

View Articletitled, Factors Affecting Steam Generator Tube Bow

PDF

Topics: Boilers , Stress , Design , Displacement , Failure , Buckling , Collapse , Deformation , Pressure , Shells

Piping and Equipment Dynamics and Dynamic Response Analysis

Risk Evaluation Method of Acoustically Induced Vibration (AIV) Based on Random Vibration Theory

Masato Nishiguchi, Hisao Izuchi, Gaku Minorikawa

PVP 2013; V003T03A081https://doi.org/10.1115/PVP2013-97487

Abstract

View Articletitled, Risk Evaluation Method of Acoustically Induced Vibration (AIV) Based on Random Vibration Theory

PDF

Topics: Acoustics , Random vibration , Risk assessment , Vibration , Evaluation methods , Pipes , Risk , Failure , Design , Excitation

Definition of a Cut-Off Natural Frequency for Small Bore Pipework Connections

James S. G. McGhee, Stanislav MacDonald, John P. Hamilton, Gernot Wally

PVP 2013; V003T03A082https://doi.org/10.1115/PVP2013-97489

Abstract

View Articletitled, Definition of a Cut-Off Natural Frequency for Small Bore Pipework Connections

PDF

Topics: Piping systems , Design , Vibration , Failure , Excitation , Fatigue failure , Manufacturing , Pipes , Probability , Process piping

Dynamic Response of a Piping System Under Harmonic Excitations Considering Pipe-Support Friction With Variable Normal Loads

José Argüelles, Euro Casanova

PVP 2013; V003T03A083https://doi.org/10.1115/PVP2013-97595

Abstract

View Articletitled, Dynamic Response of a Piping System Under Harmonic Excitations Considering Pipe-Support Friction With Variable Normal Loads

PDF

Topics: Dynamic response , Excitation , Friction , Pipes , Piping systems , Stress , Design , Dry friction , Nonlinear equations , Pulsatile flow

System Identification and Reduction of Vibrations of Piping in Different Conditions

Gereon Hinz, Klaus Kerkhof

PVP 2013; V003T03A084https://doi.org/10.1115/PVP2013-97694

Abstract

View Articletitled, System Identification and Reduction of Vibrations of Piping in Different Conditions

PDF

Topics: Pipes , Vibration , Piping systems , Failure , Modal analysis , Boundary-value problems , Structural health monitoring , Construction , Dampers , Damping

Criteria for High Frequency Cutoff Based on ABWR Reactor Building Vibratory Loads

Evren Ulku, Cagri Ozgur, Mustafa Kemal Ozkan, Nish Vaidya, Hari Srivastava, Tetsuharu Tanoue

PVP 2013; V003T03A085https://doi.org/10.1115/PVP2013-98034

Abstract

View Articletitled, Criteria for High Frequency Cutoff Based on ABWR Reactor Building Vibratory Loads

PDF

Topics: Stress , Accidents , Annulus , Coolants , Kinetic energy , Mode shapes , Pipes , Reactor vessels , Safety , Seismic analysis

Load Definition on BWR Steam Dryer due to Turbine Stop Valve Closer

Asgar Faal-Amiri, Hari Srivastava, Frederick J. Moody

PVP 2013; V003T03A086https://doi.org/10.1115/PVP2013-98073

Abstract

View Articletitled, Load Definition on BWR Steam Dryer due to Turbine Stop Valve Closer

PDF

Topics: Boiling water reactors , Steam , Stress , Turbines , Valves , Pressure , Compression , Waves , Flow (Dynamics) , Geometry

Pressure Vessels, Heat Exchangers, and Components

Outer Surface Prior to Inner Surface Double Autofrettage Technique for a Compound Cylinder

Ossama R. Abdelsalam, Ramin Sedaghati

PVP 2013; V003T03A087https://doi.org/10.1115/PVP2013-97035

Abstract

View Articletitled, Outer Surface Prior to Inner Surface Double Autofrettage Technique for a Compound Cylinder

PDF

Topics: Autofrettage , Cylinders , Stress , Cycles , Fatigue life , Design , Load bearing capacity , Pressure vessels

Stress and Strain Fields in the Hemispherical Head of an FCC Regenerator During the Lifting Maneuver in Cyclone Replacement

Erik Garrido, Euro Casanova

PVP 2013; V003T03A088https://doi.org/10.1115/PVP2013-97038

Abstract

View Articletitled, Stress and Strain Fields in the Hemispherical Head of an FCC Regenerator During the Lifting Maneuver in Cyclone Replacement

PDF

Topics: Stress , Displacement , Cracking (Materials) , Design , Engineering standards , Finite element model , Fluids , Fracture (Process) , Petroleum industry , Sensitivity analysis

Assessment of the Influence of Bulging and the Thermal Gradients in the Stress Level in the Cylindrical Section of a Coke Drum

Egler D. Araque, Gabriel A. Vivas

PVP 2013; V003T03A089https://doi.org/10.1115/PVP2013-97052

Abstract

View Articletitled, Assessment of the Influence of Bulging and the Thermal Gradients in the Stress Level in the Cylindrical Section of a Coke Drum

PDF

Topics: Coke , Stress , Temperature gradient , Fracture (Materials) , Shells , Temperature , American Petroleum Institute , Cracking (Materials) , Cylinders , Deformation

Frequently Overlooked Heat Exchanger Design Conditions

Andrey Gutkovsky, Jaan Taagepera

PVP 2013; V003T03A090https://doi.org/10.1115/PVP2013-97644

Abstract

View Articletitled, Frequently Overlooked Heat Exchanger Design Conditions

PDF

Topics: Design , Heat exchangers , Pressure , Stress , Bending (Stress) , Design methodology , Finite element analysis , Geometry , Membranes , Plates (structures)

Research and Development of a Rubber O-Ring Sealing Device for High Pressure Vessels

Fan Zhou, Zhiping Chen, Haigui Fan

PVP 2013; V003T03A091https://doi.org/10.1115/PVP2013-97723

Abstract

View Articletitled, Research and Development of a Rubber O-Ring Sealing Device for High Pressure Vessels

PDF

Topics: Design , High-pressure vessels , Industrial research , Rubber , Sealing (Process) , Seals

Stress Analysis on New Multilayer Cylinder With Use of Thin Inner Shell and Cross-Helical Wound Shaped-Steel Ribbon for Pressure Vessels

Ping Chen, Shuilian Chen

PVP 2013; V003T03A092https://doi.org/10.1115/PVP2013-97745

Abstract

View Articletitled, Stress Analysis on New Multilayer Cylinder With Use of Thin Inner Shell and Cross-Helical Wound Shaped-Steel Ribbon for Pressure Vessels

PDF

Topics: Cylinders , Pressure vessels , Shells , Steel , Stress analysis (Engineering)

Experimental Fatigue Evaluation of Aluminum Brazed Plate Fin Heat Exchangers

Reinhold Hölzl, Rainer Flüggen

PVP 2013; V003T03A093https://doi.org/10.1115/PVP2013-97915

Abstract

View Articletitled, Experimental Fatigue Evaluation of Aluminum Brazed Plate Fin Heat Exchangers

PDF

Topics: Aluminum , Fatigue , Heat exchangers , Cycles , Leakage , Finite element analysis , Stress , Damage , Fatigue design , Geometry

Numerical Analytic Approach to a Calculation of a Thermal Stress State of Shell and Tube Heat Exchangers

Igor Laskin, Boris Volfson

PVP 2013; V003T03A094https://doi.org/10.1115/PVP2013-97930

Abstract

View Articletitled, Numerical Analytic Approach to a Calculation of a Thermal Stress State of Shell and Tube Heat Exchangers

PDF

Topics: Heat exchangers , Shells , Thermal stresses , Finite element analysis , Computer simulation , Modeling , Stress , Computation , Simulation , Temperature distribution

Effect of Hydrostatic Pressure on Buckling Behavior of Storage Tanks Under Local Support Settlement

Jianguo Gong, Sheng Zeng, Tao Jin

PVP 2013; V003T03A095https://doi.org/10.1115/PVP2013-97964

Abstract

View Articletitled, Effect of Hydrostatic Pressure on Buckling Behavior of Storage Tanks Under Local Support Settlement

PDF

Topics: Buckling , Hydrostatic pressure , Storage tanks , Pressure , Roofs , Shells , Stress

An Evaluation of the Protection Against Local Failure in ASME Section VIII, Division 2: Finite Element Model Considerations

Trevor G. Seipp

PVP 2013; V003T03A096https://doi.org/10.1115/PVP2013-98028

Abstract

View Articletitled, An Evaluation of the Protection Against Local Failure in ASME Section VIII, Division 2: Finite Element Model Considerations

PDF

Topics: Failure , Finite element model , Failure mechanisms , Stress , Shapes , Damage , Finite element methods , Materials properties

Probabilistic Methods in Design and Analysis

A Methodology for Generation of Best-Estimate Pipeweld Failure Probabilities and Leak Rates for Pressurised Water (PWR) Reactor Plant

James Wilson, Elizabeth Heaton

PVP 2013; V003T03A097https://doi.org/10.1115/PVP2013-97059

Abstract

View Articletitled, A Methodology for Generation of Best-Estimate Pipeweld Failure Probabilities and Leak Rates for Pressurised Water (PWR) Reactor Plant

PDF

Topics: Failure , Leakage , Pressurized water reactors , Probability , Water , Fracture (Materials) , Geometry , Welding , Bending (Stress) , Computer software

Design Curve Construction Based on Monte Carlo Simulation

Zhigang Wei, Limin Luo, Burt Lin, Dmitri Konson, Kamran Nikbin

PVP 2013; V003T03A098https://doi.org/10.1115/PVP2013-97631

Abstract

View Articletitled, Design Curve Construction Based on Monte Carlo Simulation

PDF

Topics: Construction , Design , Simulation , Fatigue , Approximation , Durability , Failure , Probability , Reliability

Application of the Bayesian Updating to the Load and Resistance Factor Design (LRFD) Method

Yuji Nakasone

PVP 2013; V003T03A099https://doi.org/10.1115/PVP2013-97804

Abstract

View Articletitled, Application of the Bayesian Updating to the Load and Resistance Factor Design (LRFD) Method

PDF

Topics: Design , Stress , Reliability , Design methodology , Fracture (Materials) , Fracture (Process) , Probability , Statistical distributions , Uncertainty

Stress Classification and Design by Analysis Methodologies

ASME Section III Stress Analysis of a Heat Exchanger Tubesheet With a Misdrilled Hole and Irregular or Thin Ligaments

Enrique Gomez, Roberto Ruiz, Robert M. (Con) Wilson

PVP 2013; V003T03A100https://doi.org/10.1115/PVP2013-97075

Abstract

View Articletitled, ASME Section III Stress Analysis of a Heat Exchanger Tubesheet With a Misdrilled Hole and Irregular or Thin Ligaments

PDF

Topics: Heat exchangers , Stress analysis (Engineering) , Boilers , Flat plates , Nuclear reactor steam generators , Stress

Technical Justification Supporting Operation With a Tube Installed in a Mis-Drilled Hole of a Steam Generator Tubesheet

Roberto Ruiz, Enrique Gomez, Robert M. (Con) Wilson

PVP 2013; V003T03A101https://doi.org/10.1115/PVP2013-97076

Abstract

View Articletitled, Technical Justification Supporting Operation With a Tube Installed in a Mis-Drilled Hole of a Steam Generator Tubesheet

PDF

Topics: Boilers , Corrosion , Heat exchangers , Manufacturing , Stress , Stress analysis (Engineering) , Vibration , Wear

Stress Classification for Tubesheet of Heat Exchanger With Semi-Ellipsoidal Heads

Naoki Yoshimura, Shunji Kataoka, Takuya Sato

PVP 2013; V003T03A102https://doi.org/10.1115/PVP2013-97255

Abstract

View Articletitled, Stress Classification for Tubesheet of Heat Exchanger With Semi-Ellipsoidal Heads

PDF

Topics: Heat exchangers , Stress , Design , Finite element analysis , Shells , Bending (Stress) , Deformation , Dimensions , Failure , Heat

Nondestructive Monitoring of Variations of Residual Stresses in Steel Weldments by Magnetic Barkhausen Noise Method

C. Hakan Gür, Gökhan Erian, Caner Batıgün, İbrahim Çam

PVP 2013; V003T03A103https://doi.org/10.1115/PVP2013-97495

Abstract

View Articletitled, Nondestructive Monitoring of Variations of Residual Stresses in Steel Weldments by Magnetic Barkhausen Noise Method

PDF

Topics: Noise (Sound) , Residual stresses , Steel , Signals , American Petroleum Institute , Calibration , Computer simulation , Plates (structures) , Process design , Stress

The Role of Computational Weld Mechanics in the Weld Repair of Canada’s NRU Nuclear Reactor

John A. Goldak, Metin Yetisir, Rob Pistor

PVP 2013; V003T03A104https://doi.org/10.1115/PVP2013-97948

Abstract

View Articletitled, The Role of Computational Weld Mechanics in the Weld Repair of Canada’s NRU Nuclear Reactor

PDF

Topics: Maintenance , Nuclear reactors , Aluminum , Welding , Biomedicine , Design , Aluminum plate , Cancer , Chalk , Computers

Thermal Stresses and Elevated Temperature Design

A Study for Proposal of Welded Joint Strength Reduction Factors of Modified 9Cr-1Mo Steel for Japan Sodium Cooled Fast Reactor (JSFR)

Takashi Wakai, Takashi Onizawa, Takehiko Kato, Shingo Date, Koichi Kikuchi, Kenichiro Satoh

PVP 2013; V003T03A105https://doi.org/10.1115/PVP2013-97091

Abstract

View Articletitled, A Study for Proposal of Welded Joint Strength Reduction Factors of Modified 9Cr-1Mo Steel for Japan Sodium Cooled Fast Reactor (JSFR)

PDF

Topics: Sodium fast reactors , Steel , Welded joints , Creep , Rupture , Stress , Base metals , Design , Temperature , Damage

Fatigue and Ratcheting Experimental Responses of Alloy 617 Under High Temperature Multiaxial Loading

Shahriar Quayyum, Mainak Sengupta, Gloria Choi, Clifford J. Lissenden, Tasnim Hassan

PVP 2013; V003T03A106https://doi.org/10.1115/PVP2013-97252

Abstract

View Articletitled, Fatigue and Ratcheting Experimental Responses of Alloy 617 Under High Temperature Multiaxial Loading

PDF

Topics: Alloys , Fatigue , High temperature

Creep Damage Evaluation for Fine Grained HAZ of Mod. 9Cr Steels Under Multi-Axial Stress Conditions

Kimiaki Yoshida, Masataka Yatomi, Masaaki Tabuchi, Ken-ichi Kobayashi

PVP 2013; V003T03A107https://doi.org/10.1115/PVP2013-97406

Abstract

View Articletitled, Creep Damage Evaluation for Fine Grained HAZ of Mod. 9Cr Steels Under Multi-Axial Stress Conditions

PDF

Topics: Creep , Damage , Steel , Stress , Ductility , Rupture , Electromagnetic scattering , Finite element analysis , Heat

Detail Investigation of Omega Method for Creep Analysis of Pressure Vessel Components

Francesco Vivio, Luca Gaetani, Michele Ferracci, Alessandro Masia

PVP 2013; V003T03A108https://doi.org/10.1115/PVP2013-97470

Abstract

View Articletitled, Detail Investigation of Omega Method for Creep Analysis of Pressure Vessel Components

PDF

Topics: Creep , Pressure vessels , American Petroleum Institute , Deformation , Finite element analysis , Fitness-for-service , High temperature , High-pressure vessels , Materials properties , Pressure

Interfacial Blister Evolution of Coated Surfaces Under Severe Thermal and Pressure Transients

J. T. Harris, A. E. Segall, D. Robinson, R. Carter

PVP 2013; V003T03A109https://doi.org/10.1115/PVP2013-97596

Abstract

View Articletitled, Interfacial Blister Evolution of Coated Surfaces Under Severe Thermal and Pressure Transients

PDF

Topics: Gun barrels , Pressure , Transients (Dynamics)

User’s Design Specification Preparation for 2¼Cr-1Mo-¼V Reactors in Accordance With ASME Section VIII, Division 2 Code and Code Case 2605

Radoslav Stefanovic, Alicia Avery, Kanhaiya Bardia, Reza Kabganian, Vasile Oprea, Trevor Seipp

PVP 2013; V003T03A110https://doi.org/10.1115/PVP2013-97720

Abstract

View Articletitled, User’s Design Specification Preparation for 2¼Cr-1Mo-¼V Reactors in Accordance With ASME Section VIII, Division 2 Code and Code Case 2605

PDF

Topics: Design , Cracking (Materials) , Engineers , Fracture (Process) , Manufacturing , Steel , Creep , Cycles , Fatigue , Fatigue life

Design on the Installation Position of Thermal Stress Monitoring System for CFBC Boiler of Thermal Power Plant

Ha-Geun Kim, Sang-Beom Shin, Dae-Soon Kim

PVP 2013; V003T03A111https://doi.org/10.1115/PVP2013-98080

Abstract

View Articletitled, Design on the Installation Position of Thermal Stress Monitoring System for CFBC Boiler of Thermal Power Plant

PDF

Topics: Boilers , Design , Monitoring systems , Thermal power stations , Thermal stresses , Damage , Finite element analysis , Superheaters , Creep , Fatigue

All Years

Proceedings Papers

Design and Analysis

CFD in Design and Analysis

Composite Materials and Structures

Design and Analysis of Piping and Piping Components

Design and Analysis of Bolted Joints

Fatigue

Fitness for Service Evaluations and Post Construction Issues

Fracture

Inelastic, Nonlinear Analysis, and Limit Load Analysis

Piping and Equipment Dynamics and Dynamic Response Analysis

Pressure Vessels, Heat Exchangers, and Components

Probabilistic Methods in Design and Analysis

Stress Classification and Design by Analysis Methodologies

Thermal Stresses and Elevated Temperature Design

Email alerts

Most Read Proceedings Papers in PVP

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only