Volumes | Pressure Vessels and Piping Conference | American Society of Mechanical Engineers Digital Collection

Skip Nav Destination

ASME 2010 Pressure Vessels and Piping Conference: Volume 5

High-Pressure Technology

High Pressure Vessel Design and Analysis, Gun Tube Technology, Deep-Sea Equipment, Internal Vessel Explosions, Polyethylene Production, Abrasive Waterjets and Other High Pressure Vessel Technology

Mechanics Design Models for Advanced Pressure Vessels: Autofrettage With Higher Strength Steel; Steel Liner - Composite Jacket Configurations; Alternative Thermal Barrier Coatings

John H. Underwood, Robert H. Carter, Edward Troiano, Anthony P. Parker

PVP 2010; 1-11https://doi.org/10.1115/PVP2010-25006

View Articletitled, Mechanics Design Models for Advanced Pressure Vessels: Autofrettage With Higher Strength Steel; Steel Liner - Composite Jacket Configurations; Alternative Thermal Barrier Coatings

PDF

Topics: Autofrettage , Composite materials , Design , Pressure vessels , Steel , Thermal barrier coatings , Temperature , Coatings , Vessels , Erosion

Impact of Intensity of Residual Stress Field Upon Re-Yielding and Re-Autofrettage of an Autofrettaged Thick Cylinder

Anthony P. Parker, John H. Underwood, Edward Troiano

PVP 2010; 13-21https://doi.org/10.1115/PVP2010-25020

Abstract

View Articletitled, Impact of Intensity of Residual Stress Field Upon Re-Yielding and Re-Autofrettage of an Autofrettaged Thick Cylinder

PDF

Topics: Autofrettage , Cylinders , Stress , Pressure , Hoop stress , Compression , Compressive stress , Fatigue , Fatigue cracks , Gun barrels

New Design Basis for the Design of High Pressure Polyethylene Reactor Bay Using an Explosion Risk Analysis and Non Linear Finite Analysis

Christophe Catala, Cedric Allemand, Michel Moine, Laurent Paris, Nicolas Salau¨n, Olivier Iddir

PVP 2010; 23-30https://doi.org/10.1115/PVP2010-25021

Abstract

View Articletitled, New Design Basis for the Design of High Pressure Polyethylene Reactor Bay Using an Explosion Risk Analysis and Non Linear Finite Analysis

PDF

Topics: Design , Explosions , High pressure (Physics) , Low density polyethylene , Risk analysis

Considerations on Design, Operation and Performance of Hypercompressors

Enzo Giacomelli, Jun-Xia Shi, Fabio Manfrone

PVP 2010; 31-40https://doi.org/10.1115/PVP2010-25040

Abstract

View Articletitled, Considerations on Design, Operation and Performance of Hypercompressors

PDF

Topics: Design , Cylinders , Maintenance , Compressors , Safety , Stress , Valves , Computational fluid dynamics , Construction , Emergencies

Machining of Aircraft Titanium With Abrasive-Waterjets for Fatigue Critical Applications

H.-T. Liu, Y. Hovanski, M. E. Dahl

PVP 2010; 41-53https://doi.org/10.1115/PVP2010-25063

Abstract

View Articletitled, Machining of Aircraft Titanium With Abrasive-Waterjets for Fatigue Critical Applications

PDF

Topics: Aircraft , Fatigue , Machining , Titanium , Blasting , Bone , Aluminum , Computer numerical control machine tools , Cutting , Fatigue testing

Stress Concentration Factors for Crossbores in Thick Walled Cylinders and Square Blocks

Katsumi Watanabe, Susumu Terada

PVP 2010; 55-61https://doi.org/10.1115/PVP2010-25123

Abstract

View Articletitled, Stress Concentration Factors for Crossbores in Thick Walled Cylinders and Square Blocks

PDF

Topics: Cylinders , Stress concentration , Boundary-value problems , Finite element analysis

Shaping a Middle Surface of Dished Head of a Circular Cylindrical Pressure Vessel

J. Lewinski, K. Magnucki

PVP 2010; 63-67https://doi.org/10.1115/PVP2010-25208

Abstract

View Articletitled, Shaping a Middle Surface of Dished Head of a Circular Cylindrical Pressure Vessel

PDF

Topics: Pressure vessels , Circular cylindrical shells , Design , Pressure , Shapes

Plastic Instabilities in Statically and Dynamically Loaded Spherical Vessels

Thomas A. Duffey, Edward A. Rodriguez

PVP 2010; 69-77https://doi.org/10.1115/PVP2010-25230

Abstract

View Articletitled, Plastic Instabilities in Statically and Dynamically Loaded Spherical Vessels

PDF

Topics: Vessels , Spherical shells , Collapse , Constitutive equations , Pressure , ASME Standards , Damage mechanics , Design , Displacement , Failure

Plunger Failure on a Second Stage Cylinder of a Hyper Compressor

Bas Megens, Bert Colaris

PVP 2010; 79-83https://doi.org/10.1115/PVP2010-25250

Abstract

View Articletitled, Plunger Failure on a Second Stage Cylinder of a Hyper Compressor

PDF

Topics: Compressors , Cylinders , Failure , Fracture (Materials) , Heat , Wear , Fatigue cracks , High pressure (Physics) , Leakage , Lubrication

Methods for Life Assessment of Hypercompressor Poppet Valves

Riccardo Bagagli, Nicola Campo, Stefano Francini, Karl C. Simpson, Christopher Morgan

PVP 2010; 85-92https://doi.org/10.1115/PVP2010-25424

Abstract

View Articletitled, Methods for Life Assessment of Hypercompressor Poppet Valves

PDF

Topics: Valves , Flow (Dynamics) , Pressure , Stress , Cycles , Damage , Design , Displacement , Drag (Fluid dynamics) , Failure mechanisms

Blast Load Significance on Pressure Testing Enclosure Designs

Matthew Edel, Donald Ketchum

PVP 2010; 93-102https://doi.org/10.1115/PVP2010-25442

Abstract

View Articletitled, Blast Load Significance on Pressure Testing Enclosure Designs

PDF

Topics: Blast effect , Pressure testing

Analysis of the Dynamic Response of a Controlled Detonation Chamber

B. Simoens, M. H. Lefebvre, J. K. Asahina, F. Minami, R. E. Nickell

PVP 2010; 103-110https://doi.org/10.1115/PVP2010-25592

Abstract

View Articletitled, Analysis of the Dynamic Response of a Controlled Detonation Chamber

PDF

Topics: Dynamic response , Explosions , Vessels , Deformation , Shapes , Cycles , Explosives , Fatigue , Oscillating frequencies , Strain gages

High Pressure Dynamic Seal for Plunger Pumps With Pressures Above 35 KPSI

Stephan Notzon

PVP 2010; 111-119https://doi.org/10.1115/PVP2010-25666

Abstract

View Articletitled, High Pressure Dynamic Seal for Plunger Pumps With Pressures Above 35 KPSI

PDF

Topics: High pressure (Physics) , Pumps , Sealing (Process) , Design , Fluids , Computer simulation , Crystallization , Deflection , Fluid structure interaction , Friction

Economic and Technical Efficiency of High Performance Abrasive Waterjet Cutting

Axel Henning, Peter Liu, Carl Olsen

PVP 2010; 121-128https://doi.org/10.1115/PVP2010-25789

Abstract

View Articletitled, Economic and Technical Efficiency of High Performance Abrasive Waterjet Cutting

PDF

Topics: Chain , Computer programming , Computer software , Cutting , Experimental analysis , Jets , Machinery , Machining , Manufacturing , Nozzles

Gun Liner Emplacement Using Elastomeric Materials

Robert H. Carter, David M. Gray

PVP 2010; 129-134https://doi.org/10.1115/PVP2010-25955

Abstract

View Articletitled, Gun Liner Emplacement Using Elastomeric Materials

PDF

Topics: Elastomers , Gun barrels , Pressure , Steel , Stress , Autofrettage , Bond strength , Disks , Lubrication , Refractory metals

Life Assessment of Full-Scale EDS Vessel Under Impulsive Loadings

Mien Yip, Brent Haroldsen

PVP 2010; 135-143https://doi.org/10.1115/PVP2010-26036

Abstract

View Articletitled, Life Assessment of Full-Scale EDS Vessel Under Impulsive Loadings

PDF

Topics: Vessels , Stress , Explosions , Design , Explosives , Munitions , Stainless steel , Army , ASME Standards , Failure

ASME NDE Division

Code Case 2235

Review of the Basis and Experience With Application of ASME BPV Code Case 2235

Owen F. Hedden

PVP 2010; 147-151https://doi.org/10.1115/PVP2010-25098

Abstract

View Articletitled, Review of the Basis and Experience With Application of ASME BPV Code Case 2235

PDF

Topics: Acceptance criteria , Fitness-for-service , Pipes , Pressure vessels , Welded joints

Evaluating the Use of Ultrasonic Testing in Lieu of Radiography for Inspecting Welds in Nuclear Power Plants

Traci L. Moran, Pradeep Ramuhalli, Allan F. Pardini, Steven R. Doctor, Michael T. Anderson

PVP 2010; 153-159https://doi.org/10.1115/PVP2010-25353

Abstract

View Articletitled, Evaluating the Use of Ultrasonic Testing in Lieu of Radiography for Inspecting Welds in Nuclear Power Plants

PDF

Topics: Nuclear power stations , Ultrasonic testing , Welded joints , Inspection , Nuclear industry , Construction , Human factors , Maintenance , Manufacturing , Nondestructive evaluation

NDE Engineering Applications

Guidance for Non-Intrusive Inspection of Pressure Vessels

Carl E. Jaske

PVP 2010; 161-172https://doi.org/10.1115/PVP2010-25218

Abstract

View Articletitled, Guidance for Non-Intrusive Inspection of Pressure Vessels

PDF

Topics: Inspection , Pressure vessels , Vessels , Engineers , Regulations

A Non-Destructive Evaluation Method: Measuring the Fixed Strength of Spot Welded Joint Points by Surface Electric Resistivity

Akira Shimamoto, Keitaro Yamashita, Hirofumi Inoue, Sung-mo Yang, Masahiro Iwata, Natsuko Kato

PVP 2010; 173-180https://doi.org/10.1115/PVP2010-25235

Abstract

View Articletitled, A Non-Destructive Evaluation Method: Measuring the Fixed Strength of Spot Welded Joint Points by Surface Electric Resistivity

PDF

Topics: Electrical resistivity , Nondestructive evaluation , Welded joints , Electrical resistance , Automobiles , Steel , Tensile strength , Welding , Zinc plating

Quality Assurance Activities for Corrosion Resistant Membranes in Pressure Vessels

J. Wei, G. Moe, M. Pearson

PVP 2010; 181-191https://doi.org/10.1115/PVP2010-25914

Abstract

View Articletitled, Quality Assurance Activities for Corrosion Resistant Membranes in Pressure Vessels

PDF

Topics: Corrosion , Membranes , Pressure vessels , Quality control , Vessels , Carbon steel , Cladding systems (Building) , Contamination , Engineers , Ester

NDE Engineering Life Extension Issues

Research Activities in the European Union on Ageing Management for Long Term Operation of Nuclear Power Plants

Oliver Martin, Antonio Ballesteros, Christiane Bruynooghe, Michel Bie`th

PVP 2010; 193-198https://doi.org/10.1115/PVP2010-25678

Abstract

View Articletitled, Research Activities in the European Union on Ageing Management for Long Term Operation of Nuclear Power Plants

PDF

Topics: Nuclear power stations , Cables , Concretes , Instrumentation , Nuclear reactors , Public utilities , Safety

Using Technology to Support Proactive Management of Materials Degradation for the U.S. Nuclear Regulatory Commission

W. Boyd Taylor, Katherine J. Knobbs, C. E. Gene Carpenter, Jr., Shah N. Malik

PVP 2010; 199-206https://doi.org/10.1115/PVP2010-26063

Abstract

View Articletitled, Using Technology to Support Proactive Management of Materials Degradation for the U.S. Nuclear Regulatory Commission

PDF

Topics: Amperes , Licensing , Light water reactors , Materials degradation , Materials management , Pacific Ocean , Plant design , Service life (Equipment)

NDE Engineering Research

Digital Image Evaluation Method for Digital Radiography

Masako Mori, Toshibumi Kashiwa, Yoshimitsu Aoki

PVP 2010; 207-213https://doi.org/10.1115/PVP2010-25264

Abstract

View Articletitled, Digital Image Evaluation Method for Digital Radiography

PDF

Topics: Evaluation methods , Inspection , Testing , Transfer functions

Potential Difference Around Semi-Elliptical Crack on the Outer Surface of Pipe for Non-Destructive Evaluation of Crack by DC-PDM

Naoya Tada, Makoto Uchida, Hiroki Maeda

PVP 2010; 215-222https://doi.org/10.1115/PVP2010-25286

Abstract

View Articletitled, Potential Difference Around Semi-Elliptical Crack on the Outer Surface of Pipe for Non-Destructive Evaluation of Crack by DC-PDM

PDF

Topics: Fracture (Materials) , Nondestructive evaluation , Pipes , Pulse width modulation , Damage , Finite element analysis , Fracture mechanics , Geometry , Numerical analysis , Power stations

Accuracy Comparison of the Electrical Potential Drop Technique and Ultrasonic Testing for the Pipe Wall Thinning in the Thermal Power Plant

Shin Yoshino, Seiichi Hamada, Yoshi Kaieda

PVP 2010; 223-228https://doi.org/10.1115/PVP2010-25410

Abstract

View Articletitled, Accuracy Comparison of the Electrical Potential Drop Technique and Ultrasonic Testing for the Pipe Wall Thinning in the Thermal Power Plant

PDF

Topics: Electrical potential drop techniques , Pipes , Thermal power stations , Ultrasonic testing , Durability

Detection of the Crack Initiation by Means of AE Method Under Low Cycle Fatigue of Elbow Pipe Having Local Wall Thinning

Naoya Kasai, Kotoji Ando, Maki Nishio, Yoshio Urabe, Koji Takahashi

PVP 2010; 229-232https://doi.org/10.1115/PVP2010-25426

Abstract

View Articletitled, Detection of the Crack Initiation by Means of AE Method Under Low Cycle Fatigue of Elbow Pipe Having Local Wall Thinning

PDF

Topics: Fracture (Materials) , Low cycle fatigue , Pipes , Signals , Corrosion , Displacement , Flow (Dynamics) , Sensors

Experimental Study on Critical Derivative of Cracking Magnetic Field Intensity in High Frequency Fatigue Test

Yi-liang Zhang, Rui-bin Gou, Ji-min Li, Gong-tian Shen, Jing Wang

PVP 2010; 233-240https://doi.org/10.1115/PVP2010-25531

Abstract

View Articletitled, Experimental Study on Critical Derivative of Cracking Magnetic Field Intensity in High Frequency Fatigue Test

PDF

Topics: Fatigue testing , Fracture (Process) , Magnetic fields , Fatigue , Signals , Base metals , Fatigue cracks , High cycle fatigue , Metals , Metalwork

Study on Ultrasonic Beam Behavior in Nickel-Based Austenitic Weldments

Jing Ye, Hak-Joon Kim, Sung-Jin Song, Sung-Sik Kang, Kyungcho Kim, Hae-Dong Chung, Myung Ho Song

PVP 2010; 241-246https://doi.org/10.1115/PVP2010-25567

Abstract

View Articletitled, Study on Ultrasonic Beam Behavior in Nickel-Based Austenitic Weldments

PDF

Topics: Nickel , Anisotropy , Inspection , Boilers , Elasticity , Electromagnetic scattering , Radiation scattering , Scattering (Physics) , Simulation results , Transducers

An Ultrasonic Phased Array Evaluation of Intergranular Stress Corrosion Crack (IGSCC) Detection in Austenitic Stainless Steel Piping Welds

Aaron A. Diaz, Michael T. Anderson, Anthony D. Cinson, Susan L. Crawford, Stephen E. Cumblidge

PVP 2010; 247-253https://doi.org/10.1115/PVP2010-25777

Abstract

View Articletitled, An Ultrasonic Phased Array Evaluation of Intergranular Stress Corrosion Crack (IGSCC) Detection in Austenitic Stainless Steel Piping Welds

PDF

Topics: Pipes , Stainless steel , Stress corrosion cracking , Welded joints , Boiling water reactors , Inspection , Light water reactors , Nondestructive evaluation , Pacific Ocean , Reliability

An Ultrasonic Phased Array Evaluation of Cast Austenitic Stainless Steel Pressurizer Surge Line Piping Welds

Aaron A. Diaz, Anthony D. Cinson, Susan L. Crawford, Traci L. Moran, Michael T. Anderson

PVP 2010; 255-263https://doi.org/10.1115/PVP2010-25799

Abstract

View Articletitled, An Ultrasonic Phased Array Evaluation of Cast Austenitic Stainless Steel Pressurizer Surge Line Piping Welds

PDF

Topics: Pipes , Stainless steel , Surges , Welded joints , Fatigue cracks , Fracture (Materials) , Noise (Sound) , Polishing , Probes , Ultrasonic testing

Analysis on Layer Cracking of Urea Reactors

Mengli Li, Weiqiang Wang, Yan Liu, Aiju Li, Mingda Song, Shugen Xu, Yuliang Cui, Xiao Yuan

PVP 2010; 265-274https://doi.org/10.1115/PVP2010-25855

Abstract

View Articletitled, Analysis on Layer Cracking of Urea Reactors

PDF

Topics: Cracking (Materials) , Fracture (Process) , Leakage , Explosions , China , Corrosion , Explosives , Flow (Dynamics) , Fracture (Materials) , Inspection

Parametric Study on Determining Optimal Eddy Current Testing Method for Inspection of Steam Generator Tubes in SMART Plant

Dae-Kwang Kim, Sung-Jin Han, Hak-Joon Kim, Sung-Jin Song, Yun-hang Choung

PVP 2010; 275-278https://doi.org/10.1115/PVP2010-25877

Abstract

View Articletitled, Parametric Study on Determining Optimal Eddy Current Testing Method for Inspection of Steam Generator Tubes in SMART Plant

PDF

Topics: Boilers , Eddy current testing , Inspection , Nuclear power stations , Signals , Nuclear power , Pressurized water reactors , Shapes , Simulation , Testing

Inspection of Bottom Mounted Instrumentation (BMI) J-Weld

Olivier Burat, Marc Piriou, Yann Kernin, Mikael Debroise, Christophe Moreau, Samuel W. Glass, Olivier Casula

PVP 2010; 279-285https://doi.org/10.1115/PVP2010-26173

Abstract

View Articletitled, Inspection of Bottom Mounted Instrumentation (BMI) J-Weld

PDF

Topics: Inspection , Instrumentation

Student Paper Competition

Assessment of the Hodograph Cone Method (HCM) for the Evaluation of the COD of Off-Centered Crack in Pipes Under Bending for LBB Assessment

G. Iannitti

PVP 2010; 289-293https://doi.org/10.1115/PVP2010-25023

Abstract

View Articletitled, Assessment of the Hodograph Cone Method (HCM) for the Evaluation of the COD of Off-Centered Crack in Pipes Under Bending for LBB Assessment

PDF

Topics: Fracture (Materials) , Pipes , Computer simulation , Finite element analysis , Finite element methods , Finite element model , Imaging , Robustness

Three-Dimensional CFD Analysis of a Spring-Loaded Pressure Safety Valve From Opening to Re-Closure

Xue Guan Song, Lei Cui, Young Chul Park

PVP 2010; 295-303https://doi.org/10.1115/PVP2010-25024

Abstract

View Articletitled, Three-Dimensional CFD Analysis of a Spring-Loaded Pressure Safety Valve From Opening to Re-Closure

PDF

Topics: Computational fluid dynamics , Pressure , Safety , Springs , Valves , Platform supply vessels , Fluids , Disks , Dynamic analysis , Flow (Dynamics)

Failure Criterion for Varying Strain Rates

Kian Sing Tan, Young W. Kwon

PVP 2010; 305-314https://doi.org/10.1115/PVP2010-25149

Abstract

View Articletitled, Failure Criterion for Varying Strain Rates

PDF

Topics: Dynamic testing (Materials) , Failure

Influence of Strength Mismatch and Weld Residual Stress on Fatigue Crack Growth Behavior for Pipeline Steel Including Closure Effects

Diego Felipe Sarzosa Burgos, Claudio Ruggieri

PVP 2010; 315-325https://doi.org/10.1115/PVP2010-25169

Abstract

View Articletitled, Influence of Strength Mismatch and Weld Residual Stress on Fatigue Crack Growth Behavior for Pipeline Steel Including Closure Effects

PDF

Topics: Fatigue cracks , Pipelines , Steel , Stress , Fracture (Materials) , Tension , Base metals , Elasticity , Fatigue , Fatigue damage

Probabilistic Fracture Mechanics Application for Alloy 82/182 Welds in PWRS

Jong-Dae Hong, Changheui Jang

PVP 2010; 327-333https://doi.org/10.1115/PVP2010-25176

Abstract

View Articletitled, Probabilistic Fracture Mechanics Application for Alloy 82/182 Welds in PWRS

PDF

Topics: Alloys , Fracture mechanics , Pressurized water reactors , Welded joints , Fracture (Materials) , Failure , Probability , Water chemistry , Cracking (Materials) , Fracture (Process)

The Stress Corrosion Cracking of Austenitic Stainless Steel Heat Exchange Tubes: Three Cases Study

Shugen Xu, Weiqiang Wang, Huadong Liu

PVP 2010; 335-343https://doi.org/10.1115/PVP2010-25217

Abstract

View Articletitled, The Stress Corrosion Cracking of Austenitic Stainless Steel Heat Exchange Tubes: Three Cases Study

PDF

Topics: Heat , Stainless steel , Stress corrosion cracking , Fracture (Process) , Corrosion , Fracture (Materials) , Heat exchangers , High temperature , Leakage , Oxygen

Prediction of Transient Creep Response Under Combined Primary and Secondary Loading

Hamed Yazdani Nezhad, Noel P. O’Dowd

PVP 2010; 345-353https://doi.org/10.1115/PVP2010-25272

Abstract

View Articletitled, Prediction of Transient Creep Response Under Combined Primary and Secondary Loading

PDF

Topics: Creep , Transients (Dynamics) , Stress , Finite element analysis , Fracture (Materials) , Fracture (Process) , Fracture mechanics , Relaxation (Physics) , Tension

Validation of the K and J Parameters in a Compact Tension Specimen Containing Intergranular and Straight Crack Paths

A. N. Mehmanparast, C. M. Davies, K. M. Nikbin

PVP 2010; 355-366https://doi.org/10.1115/PVP2010-25281

Abstract

View Articletitled, Validation of the K and J Parameters in a Compact Tension Specimen Containing Intergranular and Straight Crack Paths

PDF

Topics: Fracture (Materials) , Tension , Stress , Finite element analysis , Grain boundaries , Damage , Displacement measurement , Engineering simulation , Fracture mechanics , Geometry

An Analysis of Thermo-Mechanical Behavior in a Multilayer Composite Pipe Under Temperature Variation

Wei Yang, Jyhwen Wang

PVP 2010; 367-377https://doi.org/10.1115/PVP2010-25296

Abstract

View Articletitled, An Analysis of Thermo-Mechanical Behavior in a Multilayer Composite Pipe Under Temperature Variation

PDF

Topics: Composite materials , Pipes , Temperature , Thermal stresses , Thermomechanics

Ultrasound Imaging Using Multilayer Synthetic Aperture Focusing

Martin H. Skjelvareid, Yngve Birkelund

PVP 2010; 379-387https://doi.org/10.1115/PVP2010-25338

Abstract

View Articletitled, Ultrasound Imaging Using Multilayer Synthetic Aperture Focusing

PDF

Topics: Algorithms , Delays , Nondestructive evaluation , Resolution (Optics) , Signal to noise ratio , Ultrasonic imaging , Water , Waves

A Novel Approach to Energy Based Evaluations of Ultra High-Pressure Waterjets

A. Chillman, M. Hashish, M. Ramulu

PVP 2010; 389-395https://doi.org/10.1115/PVP2010-25352

Abstract

View Articletitled, A Novel Approach to Energy Based Evaluations of Ultra High-Pressure Waterjets

PDF

Topics: High pressure (Physics) , Density , Pressure , Flow (Dynamics) , Geometry , Impulse (Physics) , Shot peening , Titanium alloys

Effects of Residual Stresses on the High Cycle Fatigue Behavior of Ti-6Al-4V

Yu-Jia Li, Fu-Zhen Xuan, Zheng-Dong Wang, Shan-Tung Tu

PVP 2010; 397-401https://doi.org/10.1115/PVP2010-25364

Abstract

View Articletitled, Effects of Residual Stresses on the High Cycle Fatigue Behavior of Ti-6Al-4V

PDF

Topics: Fatigue limit , Fatigue testing , Fracture (Materials) , High cycle fatigue , Manufacturing , Polishing , Residual stresses , Stress , Turning , Vacuum

An Estimation of C(t) of Transient Creep Under Combined Mechanical and Thermal Stresses

Chang-Young Oh, Tae-Kwang Song, Yun-Jae Kim

PVP 2010; 403-409https://doi.org/10.1115/PVP2010-25372

Abstract

View Articletitled, An Estimation of C(t) of Transient Creep Under Combined Mechanical and Thermal Stresses

PDF

Topics: Creep , Thermal stresses , Transients (Dynamics) , Stress , Fracture (Materials) , Finite element analysis , High temperature , Pipes , Relaxation (Physics)

Effect of Creep Mismatch Factor on Stress Redistribution in Welded Branch Pipes

Jae-Jun Han, Yun-Jae Kim, Kuk-Hee Lee

PVP 2010; 411-420https://doi.org/10.1115/PVP2010-25373

Abstract

View Articletitled, Effect of Creep Mismatch Factor on Stress Redistribution in Welded Branch Pipes

PDF

Topics: Creep , Pipes , Stress , Metals , Finite element analysis , Pressure , Steady state , Stress concentration , Welded joints

Modelling Ductile Tearing From Diffuse Plasticity to Crack Propagation

A. Simatos, S. Marie, A. Combescure, F. Cazes

PVP 2010; 421-434https://doi.org/10.1115/PVP2010-25387

Abstract

View Articletitled, Modelling Ductile Tearing From Diffuse Plasticity to Crack Propagation

PDF

Topics: Crack propagation , Modeling , Plasticity , Continuum mechanics , Fracture (Materials) , Fracture (Process) , Computation , Ductile fracture , Energy dissipation , Finite element analysis

Application of Annular Damper Reaction Wall in Seismic Isolated LNG Tank

Rui-Fu Zhang, Da-Gen Weng, Wei-Bo Ni

PVP 2010; 435-445https://doi.org/10.1115/PVP2010-25419

Abstract

View Articletitled, Application of Annular Damper Reaction Wall in Seismic Isolated LNG Tank

PDF

Topics: Dampers , Liquefied natural gas , Displacement , Earthquakes , Shear (Mechanics) , Bearings , Design , Equations of motion , Gases , Resonance

Data Mining of General Corrosion of Most Commonly Used Iron-Based Alloys Using Kohonen Mapping

Kathryn L. Kirsch, Mirna Urquidi-Macdonald

PVP 2010; 447-453https://doi.org/10.1115/PVP2010-25509

Abstract

View Articletitled, Data Mining of General Corrosion of Most Commonly Used Iron-Based Alloys Using Kohonen Mapping

PDF

Topics: Corrosion , Data mining , Iron alloys , Alloys , Alloy steel , Engineering prototypes , National Institute of Standards and Technology , Computer software , Design , Dimensions

Research of Fatigue Crack Growth Behavior of X70 Pipeline Steel in Corrosive Environment and Evaluation of Defect

Jing Wang, Xiao-yang Li, Shu-rui Li

PVP 2010; 455-462https://doi.org/10.1115/PVP2010-25518

Abstract

View Articletitled, Research of Fatigue Crack Growth Behavior of X70 Pipeline Steel in Corrosive Environment and Evaluation of Defect

PDF

Topics: Fatigue cracks , Pipelines , Steel , Fracture (Materials) , Stress , Corrosion , Fatigue , Natural gas , ASME Boiler and Pressure Vessel Code , Base metals

Research of Weld on Axial Buckling Stress of Multilayer Combined Cylindrical Shells

Chulin Yu, Zhiping Chen, Licai Yang

PVP 2010; 463-471https://doi.org/10.1115/PVP2010-25545

Abstract

View Articletitled, Research of Weld on Axial Buckling Stress of Multilayer Combined Cylindrical Shells

PDF

Topics: Buckling , Finite element methods , Pipes , Steel , Storage , Stress , Welding

Research on Producing the Electrode for Generating Underwater Shock Wave

Nobuyuki Matsuo, Shigeru Tanaka, Shigeru Itoh

PVP 2010; 473-476https://doi.org/10.1115/PVP2010-25547

Abstract

View Articletitled, Research on Producing the Electrode for Generating Underwater Shock Wave

PDF

Topics: Composite materials , Copper , Electrical conductivity , Electrodes , Explosives , Heat , Joining , Junctions , Manufacturing , Metals

Research About Pulverization of Rice Using Underwater Shock Wave by Electric Discharge

Makoto Ide, Seiichi Irie, Nobuyuki Matsuo, Asuka Oda, Shigeru Tanaka, Shigeru Itoh

PVP 2010; 477-481https://doi.org/10.1115/PVP2010-25549

Abstract

View Articletitled, Research About Pulverization of Rice Using Underwater Shock Wave by Electric Discharge

PDF

Topics: Electric discharge , Shock waves , Food products , Density , Heat , Heat treating (Metalworking) , Manufacturing , Numerical analysis , Pressure , Pressure vessels

Numerical Simulation and Experiment for Underwater Shock Wave in Newly Designed Pressure Vessel for Food Processing

Manabu Shibuta, Hideki Hamashima, Shigeru Itoh

PVP 2010; 483-489https://doi.org/10.1115/PVP2010-25559

Abstract

View Articletitled, Numerical Simulation and Experiment for Underwater Shock Wave in Newly Designed Pressure Vessel for Food Processing

PDF

Topics: Computer simulation , Food products , Pressure vessels , Shock waves

Effects of Overload on Fatigue Strength of SUS316 Having a Crack-Like Surface Defect

Hiroko Oosedo, Koji Takahashi, Kotoji Ando

PVP 2010; 491-495https://doi.org/10.1115/PVP2010-25570

Abstract

View Articletitled, Effects of Overload on Fatigue Strength of SUS316 Having a Crack-Like Surface Defect

PDF

Topics: Fatigue strength , Fracture (Materials) , Fatigue testing , Stress , Fatigue limit , Fracture mechanics , Tension

Influences of Inner Pressure and Overload on Low Cycle Fatigue Behaviors of Elbow Pipes With Local Wall Thinning

Kyohei Sato, Koji Takahashi, Kanako Ogino, Yoshio Urabe, Kotoji Ando

PVP 2010; 497-503https://doi.org/10.1115/PVP2010-25571

Abstract

View Articletitled, Influences of Inner Pressure and Overload on Low Cycle Fatigue Behaviors of Elbow Pipes With Local Wall Thinning

PDF

Topics: Low cycle fatigue , Pipes , Pressure , Fatigue life , Fracture (Materials) , Corrosion , Displacement , Earthquakes , Fatigue , Finite element methods

Prevention of Stress Corrosion Cracking of SUS304 by Tensile Overload

Hayato Sano, Koji Takahashi, Kotoji Ando

PVP 2010; 505-509https://doi.org/10.1115/PVP2010-25573

Abstract

View Articletitled, Prevention of Stress Corrosion Cracking of SUS304 by Tensile Overload

PDF

Topics: Stress corrosion cracking , Stress , Stainless steel , Wedges

Formation Mechanism and Micro-Structure of Eigen-Line in Electrofusion Joints of Polyethylene Pipes

Jianfeng Shi, Jinyang Zheng, Weican Guo

PVP 2010; 511-520https://doi.org/10.1115/PVP2010-25574

Abstract

View Articletitled, Formation Mechanism and Micro-Structure of Eigen-Line in Electrofusion Joints of Polyethylene Pipes

PDF

Topics: Polyethylene pipes , Welding , Crystals , Acoustics , Bubbles , Pipes , Temperature

Fracture Toughness Estimation of Miniature Specimens by Considering Geometry Effects

Shin-Beom Choi, Young-Jin Kim, Yoon-Suk Chang

PVP 2010; 521-525https://doi.org/10.1115/PVP2010-25588

Abstract

View Articletitled, Fracture Toughness Estimation of Miniature Specimens by Considering Geometry Effects

PDF

Topics: Fracture toughness , Geometry , Finite element analysis , Fracture (Materials) , Stress , Carbon steel , Reactor vessels , Safety , Surveillance , Temperature

Numerical Analysis of the Heat Transfer in a Pressurizer Water Reactor Core

Soo W. Jo, Yong K. Lee, Jong C. Jo

PVP 2010; 527-534https://doi.org/10.1115/PVP2010-25590

Abstract

View Articletitled, Numerical Analysis of the Heat Transfer in a Pressurizer Water Reactor Core

PDF

Topics: Heat transfer , Numerical analysis , Water , Temperature , Cladding systems (Building) , Coolants , Fuel rods , Fuels , Accident management , Computational fluid dynamics

Influence of Hydrogen-Charging on Oxidation of SUSF316L in Simulated BWR Environment

Motoki Nakajima, Masayuki Hosokawa, Takanori Sugimura, Shin-ichi Komazaki

PVP 2010; 535-539https://doi.org/10.1115/PVP2010-25633

Abstract

View Articletitled, Influence of Hydrogen-Charging on Oxidation of SUSF316L in Simulated BWR Environment

PDF

Topics: Boiling water reactors , Hydrogen , Oxidation , Steel , Electrolysis , Particulate matter , Stainless steel , Stress

Development of an Alternative Approach to the Acquisition of Fracture Toughness in Laboratory Specimens Containing Residual Stress

R. G. Hurlston, J. Sharples, A. H. Sherry

PVP 2010; 541-551https://doi.org/10.1115/PVP2010-25658

Abstract

View Articletitled, Development of an Alternative Approach to the Acquisition of Fracture Toughness in Laboratory Specimens Containing Residual Stress

PDF

Topics: Fracture toughness , Stress , Residual stresses , Fracture (Materials) , Welding , Fracture mechanics , Maintenance , Nuclear power stations , Pipes , Pressure vessels

Evolution of Plasticity in Relation to Ductile Tearing in 304(L) Stainless Steel

Andrew P. Wasylyk, Andrew H. Sherry

PVP 2010; 553-558https://doi.org/10.1115/PVP2010-25674

Abstract

View Articletitled, Evolution of Plasticity in Relation to Ductile Tearing in 304(L) Stainless Steel

PDF

Topics: Plasticity , Stainless steel , Fracture (Materials) , Fracture toughness , Collapse , Ductile fracture , Failure mechanisms , Tension

Fatigue Life Improvement of Threaded Pipe Couplings

Jeroen Van Wittenberghe, Patrick De Baets, Wim De Waele, Jan De Pauw

PVP 2010; 559-566https://doi.org/10.1115/PVP2010-25687

Abstract

View Articletitled, Fatigue Life Improvement of Threaded Pipe Couplings

PDF

Topics: Couplings , Fatigue life , Threaded pipes , Stress , Engineering simulation , Finite element analysis , Screw threads , Simulation , Stiffness , Thread

A Computer Simulation Model for the Stretch Blow Moulding Process of Polymer Containers

J. A. W. M. Groot, C. G. Giannopapa, R. M. M. Mattheij

PVP 2010; 567-576https://doi.org/10.1115/PVP2010-25710

Abstract

View Articletitled, A Computer Simulation Model for the Stretch Blow Moulding Process of Polymer Containers

PDF

Topics: Computer simulation , Containers , Finite element methods , Molding , Polymers

Benchmark of Computational Fluid Dynamics Simulations Using Temperatures Measured Within Enclosed Vertical and Horizontal Array of Heater Rods

N. R. Chalasani, Miles Greiner

PVP 2010; 577-595https://doi.org/10.1115/PVP2010-25803

Abstract

View Articletitled, Benchmark of Computational Fluid Dynamics Simulations Using Temperatures Measured Within Enclosed Vertical and Horizontal Array of Heater Rods

PDF

Topics: Computational fluid dynamics , Rods , Simulation , Temperature , Engineering simulation , Nitrogen , Heat , Design , Gases , Helium

The Computation of Accurate Buckling Pressures of Imperfect Thin-Walled Cylinders

Caitri´ona de Paor, Denis Kelliher, Kevin Cronin, William M. D. Wright

PVP 2010; 597-603https://doi.org/10.1115/PVP2010-25806

Abstract

View Articletitled, The Computation of Accurate Buckling Pressures of Imperfect Thin-Walled Cylinders

PDF

Topics: Buckling , Computation , Cylinders , External pressure

The Application of Harmonic Finite Elements in the Seismic Response Spectrum Analysis of a Skirt Supported Vessel

Bikramjit Singh Antaal, Yogeshwar Hari, Dennis K. Williams

PVP 2010; 605-615https://doi.org/10.1115/PVP2010-25886

Abstract

View Articletitled, The Application of Harmonic Finite Elements in the Seismic Response Spectrum Analysis of a Skirt Supported Vessel

PDF

Topics: Emission spectroscopy , Finite element analysis , Spectroscopy , Vessels , Fluids , Pressure vessels , Degrees of freedom , Fluid structure interaction , Geometry , Stress

On the Use of Theory of Rings on Non-Linear Elastic Foundation to Study the Effect of Bolt Spacing in Bolted Flange Joints

Tan Dan Do, Abdel-Hakim Bouzid, Thien-My Dao

PVP 2010; 617-625https://doi.org/10.1115/PVP2010-26001

Abstract

View Articletitled, On the Use of Theory of Rings on Non-Linear Elastic Foundation to Study the Effect of Bolt Spacing in Bolted Flange Joints

PDF

Topics: Bolted flanges , Gaskets , Flanges , Stress , Design , Failure , Finite element analysis , Heat exchangers , Leakage , Pipes

Liquid Leak Predictions in Micro and Nano-Porous Gaskets

Lotfi Grine, Abdel-Hakim Bouzid

PVP 2010; 627-633https://doi.org/10.1115/PVP2010-26004

Abstract

View Articletitled, Liquid Leak Predictions in Micro and Nano-Porous Gaskets

PDF

Topics: Gaskets , Leakage , Slip flow , Boundary-value problems , Flow (Dynamics) , Fluids , Navier-Stokes equations , Porosity , Porous materials , Pressure

The Model of Fatigue Crack Growth in High Pressure Cylinder Wall

Jan Brumek, Bohumir Strnadel, Ivo Dlouhy´

PVP 2010; 635-639https://doi.org/10.1115/PVP2010-26010

Abstract

View Articletitled, The Model of Fatigue Crack Growth in High Pressure Cylinder Wall

PDF

Topics: Fatigue cracks , Gas cylinders , Fracture (Materials) , Stress , Finite element model , Fatigue , Fatigue testing , Fracture mechanics , High strength steel , Pressure

Development of a Web-Based LNG Plant Management System for Reliability Assessment Covering From Design Stage to Maintenance

Yu-Gyeong Kim, Joo-Dong Kim, Jae-Boong Choi

PVP 2010; 641-645https://doi.org/10.1115/PVP2010-26016

Abstract

View Articletitled, Development of a Web-Based LNG Plant Management System for Reliability Assessment Covering From Design Stage to Maintenance

PDF

Topics: Design , Liquefied natural gas , Maintenance , Reliability , Monitoring systems , Safety , Construction , Databases , Internet , Nuclear power plant maintenance

Modification of Leak Before Break Criterion With Focus on the Residual Stress

Katerina Macurova, Richard Tichy, Bohumir Strnadel

PVP 2010; 647-652https://doi.org/10.1115/PVP2010-26020

Abstract

View Articletitled, Modification of Leak Before Break Criterion With Focus on the Residual Stress

PDF

Topics: Leak-before-break , Stress , Vessels , Drilling , Computer simulation , Computer software , Design , Extruding , Fracture (Materials) , Hoop stress

On the Creep Rupture Prediction of Composite Pressure Vessels

Michael Schulz

PVP 2010; 653-663https://doi.org/10.1115/PVP2010-26034

Abstract

View Articletitled, On the Creep Rupture Prediction of Composite Pressure Vessels

PDF

Topics: Composite materials , Creep , Pressure vessels , Rupture , Carbon reinforced plastics , Failure , Laminates , Resins , Deformation , Relaxation (Physics)

Bubble Formation and Behaviour Under Hypergravity Conditions

Anna Eiden, Christina Giannopapa, Balazs Toth, Alan Dowson

PVP 2010; 665-672https://doi.org/10.1115/PVP2010-26148

Abstract

View Articletitled, Bubble Formation and Behaviour Under Hypergravity Conditions

PDF

Topics: Bubbles , Nozzles , Aerospace industry , Dynamics (Mechanics) , Flow (Dynamics) , Gravity (Force) , Two-phase flow , Water , Chemical processes , Filters

Development of a Blood Flow Model and Validation Against Experiments and Analytical Models

M. H. A. van Geel, C. G. Giannopapa, B. J. van der Linden

PVP 2010; 673-681https://doi.org/10.1115/PVP2010-26150

Abstract

View Articletitled, Development of a Blood Flow Model and Validation Against Experiments and Analytical Models

PDF

Topics: Blood flow , Vessels , Fluid structure interaction , Blood , Cardiovascular system , Deformation , Finite element analysis , Finite element model , Fluid dynamics , Fluids

All Years

Proceedings Papers

High-Pressure Technology

High Pressure Vessel Design and Analysis, Gun Tube Technology, Deep-Sea Equipment, Internal Vessel Explosions, Polyethylene Production, Abrasive Waterjets and Other High Pressure Vessel Technology

ASME NDE Division

Code Case 2235

NDE Engineering Applications

NDE Engineering Life Extension Issues

NDE Engineering Research

Student Paper Competition

Student Paper Competition

Email alerts

Most Read Proceedings Papers in PVP

Journals

Conference Proceedings

eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only