Skip Nav Destination

Proceedings Papers

Select Year

Select Volume

ASME 2003 Pressure Vessels and Piping Conference

July 20–24, 2003

Cleveland, Ohio, USA

Conference Sponsors:

ISBN:

0-7918-4155-3

In This Volume

Residual Stress, Fitness-For-Service, and Manufacturing Processes

Investigation of Residual Stresses Caused by Welding, Cladding and Tempering of Reactor Pressure Vessels

V. I. Kostylev, B. Z. Margolin, A. Y. Varovin, E. Keim

PVP 2003; 3-10https://doi.org/10.1115/PVP2003-2041

Abstract

View Articletitled, Investigation of Residual Stresses Caused by Welding, Cladding and Tempering of Reactor Pressure Vessels

PDF

Topics: Cladding systems (Building) , Reactor vessels , Residual stresses , Welding , Creep , Stress , Finite element methods , Metals , Natural, scientific and engineering processes and practices , Stress concentration

Allowance for Residual Stresses and Material Interfaces When Calculating J in and Close to Welded Joints

David W. Beardsmore, Andrew H. Sherry

PVP 2003; 11-21https://doi.org/10.1115/PVP2003-2042

Abstract

View Articletitled, Allowance for Residual Stresses and Material Interfaces When Calculating J in and Close to Welded Joints

PDF

Topics: Clearances (Engineering) , Residual stresses , Welded joints , Fracture (Materials) , Finite element analysis , Stress , Structures , Welding

Optimized Conditions for Tensile Residual Stress Reducing Weld Using Water-Shower Cooling

Nobuyoshi Yanagida, Kunio Enomoto, Hideya Anzai

PVP 2003; 23-28https://doi.org/10.1115/PVP2003-2043

Abstract

View Articletitled, Optimized Conditions for Tensile Residual Stress Reducing Weld Using Water-Shower Cooling

PDF

Topics: Cooling , Stress , Water , Welding , Finite element methods , Finite element model , Heat , Residual stresses , Stainless steel , Temperature

Virtual Fabrication Technology Weld Modeling Tool and Its Applications in Distortion Predictions

Y. P. Yang, F. W. Brust, Z. Cao

PVP 2003; 29-33https://doi.org/10.1115/PVP2003-2044

Abstract

View Articletitled, Virtual Fabrication Technology Weld Modeling Tool and Its Applications in Distortion Predictions

PDF

Topics: Manufacturing , Modeling , Cutting , Design , Simulation , Welding

Creep Behavior of a Bimetallic Welded Joint in a Nuclear Piping System

Y. P. Yang, F. W. Brust, J. Oh

PVP 2003; 35-42https://doi.org/10.1115/PVP2003-2045

Abstract

View Articletitled, Creep Behavior of a Bimetallic Welded Joint in a Nuclear Piping System

PDF

Topics: Creep , Piping systems , Welded joints , Pipes , Stress , Metals , Welding , Carbon steel , Damage , Electrodes

Crack Growth Behavior in a Residual Stress Field for Vessel Type Structures

P. Dong, G. Rawls

PVP 2003; 43-57https://doi.org/10.1115/PVP2003-2046

Abstract

View Articletitled, Crack Growth Behavior in a Residual Stress Field for Vessel Type Structures

PDF

Topics: Fracture (Materials) , Stress , Vessels , Surface cracks , Residual stresses , Finite element analysis , Storage tanks , Stress analysis (Engineering) , Stress concentration , Temperature

Effect of Plasticity on Fatigue Life of Welded Nuclear Component With Local Brittle Zone

Jong-Sung Kim, Se-Hwan Lee, Tae-Eun Jin

PVP 2003; 59-64https://doi.org/10.1115/PVP2003-2047

Abstract

View Articletitled, Effect of Plasticity on Fatigue Life of Welded Nuclear Component With Local Brittle Zone

PDF

Topics: Brittleness , Fatigue life , Plasticity , Tensile strength , Fatigue , Welded joints , Alloy steel , Base metals , Deformation , Fatigue analysis

Fracture Assessment of the High Strength Super-Martensitic Stainless Steel Welds by SINTAP Defect Assessment Procedure

A. K. Motarjemi, M. Koc¸ak, R. Segar, S. Riekehr

PVP 2003; 65-73https://doi.org/10.1115/PVP2003-2048

Abstract

View Articletitled, Fracture Assessment of the High Strength Super-Martensitic Stainless Steel Welds by SINTAP Defect Assessment Procedure

PDF

Topics: Fracture (Materials) , Stainless steel , Welded joints , Pipes , Plates (structures) , Deformation , Load bearing capacity , Welding , Carbon , Failure

Dynamic Analysis of a Radioactive Material Package Primary Containment Vessel in a High Pressure Event

Tsu-te Wu, G. A. Abramczyk, P. S. Blanton

PVP 2003; 77-82https://doi.org/10.1115/PVP2003-2049

Abstract

View Articletitled, Dynamic Analysis of a Radioactive Material Package Primary Containment Vessel in a High Pressure Event

PDF

Topics: Containment vessels , Dynamic analysis , High pressure (Physics) , Radioactive substances , Stress , Pressure , ASME Standards , Containers , Explosions , Structural failures

Prediction of the Cutting Forces on Stainless Steels When Using a Turning Process

Zulay Cassier, Patricia Mun˜oz-Escalona, Jannelly Moreno

PVP 2003; 83-87https://doi.org/10.1115/PVP2003-2050

Abstract

View Articletitled, Prediction of the Cutting Forces on Stainless Steels When Using a Turning Process

PDF

Topics: Cutting , Stainless steel , Turning , Machining , Corrosion resistance , Heat , Manufacturing , Mechanical properties , Optimization

Die Design and Blanking Analysis

Mary E. Hall, Mike Long, Sean D. Rhattigan, Elvin B. Shields

PVP 2003; 89-94https://doi.org/10.1115/PVP2003-2051

Abstract

View Articletitled, Die Design and Blanking Analysis

PDF

Topics: Blanking (Metalworking) , Design , Cutting , Fracture (Process) , Manufacturing , Pressure , Tradeoffs

Implementation of an Outer Can Welding System for Savannah River Site Plutonium Processing Facility

S. Howard, W. Daugherty, C. Sessions

PVP 2003; 95-101https://doi.org/10.1115/PVP2003-2052

Abstract

View Articletitled, Implementation of an Outer Can Welding System for Savannah River Site Plutonium Processing Facility

PDF

Topics: Rivers , Welding , Testing , Containers , Failure , Pressure , Storage , Tungsten , Electrodes , Helium

Innovative Flash Control in Inertia Welding

P. S. Korinko, H. B. Peacock

PVP 2003; 103-107https://doi.org/10.1115/PVP2003-2053

Abstract

View Articletitled, Innovative Flash Control in Inertia Welding

PDF

Topics: Friction welding

Two Numerical Models for Prediction of an Industrial Concasting Process

Frantisek Kavicka, Josef Stetina, Karel Stransky, Jana Dobrovska, Vera Dobrovska, Jaromir Heger

PVP 2003; 109-118https://doi.org/10.1115/PVP2003-2054

Abstract

View Articletitled, Two Numerical Models for Prediction of an Industrial Concasting Process

PDF

Topics: Computer simulation , Solidification , Slabs , Temperature , Computation , Crystallization , Data acquisition , Fracture (Materials) , Optimization

Repair of a Melter Pour Spout Using an Expanding Ring

Harold B. Peacock, Kenneth J. Imrich, Poh-Sang Lam, Douglas R. Leader, Daniel C. Iverson

PVP 2003; 119-124https://doi.org/10.1115/PVP2003-2055

Abstract

View Articletitled, Repair of a Melter Pour Spout Using an Expanding Ring

PDF

Topics: Maintenance , Design , Glass , Metals , Modeling , Optimization , Pressure , Radioactive wastes , Testing , Vitrification

Assessment of the Possibility of Operating Pipelines With Defects

Alexander O. Chernyavsky, Sviatoslav A. Timashev, Nicolay L. Zaitsev

PVP 2003; 127-135https://doi.org/10.1115/PVP2003-2056

Abstract

View Articletitled, Assessment of the Possibility of Operating Pipelines With Defects

PDF

Topics: Pipelines , Corrosion , Finite element methods , Finite element model , Lamination , Metals , Pipeline integrity , Pipes

Strength of Pipelines With Corrosion Defects

Alexander O. Chernyavsky, Nicolay L. Zaitsev

PVP 2003; 137-140https://doi.org/10.1115/PVP2003-2057

Abstract

View Articletitled, Strength of Pipelines With Corrosion Defects

PDF

Topics: Corrosion , Pipelines , Pipes , Finite element methods , Finite element model , Pressure

Experimental Assessment of Material Strength of Two Operating Main Oil Pipelines

Sviatoslav A. Timashev, Oleg F. Chernyavsky, Yuri N. Rebyakov

PVP 2003; 141-145https://doi.org/10.1115/PVP2003-2058

Abstract

View Articletitled, Experimental Assessment of Material Strength of Two Operating Main Oil Pipelines

PDF

Topics: Pipelines , Strength (Materials) , Steel , Fatigue limit , Fracture toughness

Analytical Solutions of Crack Tip Plasticity Zone Shape for a Semi-Infinite Crack

Peihua Jing, Tariq Khraishi, Larissa Gorbatikh

PVP 2003; 149-157https://doi.org/10.1115/PVP2003-2059

Abstract

View Articletitled, Analytical Solutions of Crack Tip Plasticity Zone Shape for a Semi-Infinite Crack

PDF

Topics: Fracture (Materials) , Plasticity , Shapes , Plane strain , Stress

Verification of a Finite Element Analysis Procedure for Modeling the Nonlinear, Monotonic In-Plane Behavior of 4 Inch, Schedule 10, Stainless Steel, 90° Elbows

James K. Wilkins

PVP 2003; 159-166https://doi.org/10.1115/PVP2003-2061

Abstract

View Articletitled, Verification of a Finite Element Analysis Procedure for Modeling the Nonlinear, Monotonic In-Plane Behavior of 4 Inch, Schedule 10, Stainless Steel, 90° Elbows

PDF

Topics: Finite element analysis , Modeling , Stainless steel , Stress , Displacement , Butt welding , Density , Gages , Pipes , Shells

Burst Pressure Predictions of Cracked Pipelines Using a Micromechanics Approach

Fernando Dotta, Claudio Ruggieri

PVP 2003; 167-174https://doi.org/10.1115/PVP2003-2062

Abstract

View Articletitled, Burst Pressure Predictions of Cracked Pipelines Using a Micromechanics Approach

PDF

Topics: Micromechanics (Engineering) , Pipelines , Pressure , Fracture (Materials) , Pipes , Ductile fracture , Steel , American Petroleum Institute , Computation , Computer simulation

Damping Effect in Fluid-Structure Interaction: Application to Slamming Problem

N. Aquelet, M. Souli

PVP 2003; 175-184https://doi.org/10.1115/PVP2003-2063

Abstract

View Articletitled, Damping Effect in Fluid-Structure Interaction: Application to Slamming Problem

PDF

Topics: Damping , Fluid structure interaction , Modeling , Pressure , Algorithms , High pressure (Physics) , Shipbuilding , Stress , Airbags , Automotive industry

Parallel Computations of the Dynamic Behavior of Bubble Plumes

Fabia´n A. Bombardelli, Gustavo C. Buscaglia, Marcelo H. Garci´a

PVP 2003; 185-201https://doi.org/10.1115/PVP2003-2064

Abstract

View Articletitled, Parallel Computations of the Dynamic Behavior of Bubble Plumes

PDF

Topics: Bubbles , Computation , Plumes (Fluid dynamics) , Turbulence , Dimensions , Engineering simulation , Flow (Dynamics) , Fluids , Large eddy simulation , Modeling

Application of the Linear Matching Method to Cracked Bodies

M. Salahuddin Habibullah, A. R. S. Ponter

PVP 2003; 203-211https://doi.org/10.1115/PVP2003-2065

Abstract

View Articletitled, Application of the Linear Matching Method to Cracked Bodies

PDF

Topics: Computer programming , Design , Engineering design , Fracture (Materials) , Hardening , Plasticity , Stress , Stress singularity , Temperature

Study of Burst Conditions of Thin-Walled Pressure Vessels Subjected to Hypervelocity Impact

Igor Ye. Telitchev

PVP 2003; 213-221https://doi.org/10.1115/PVP2003-2066

Abstract

View Articletitled, Study of Burst Conditions of Thin-Walled Pressure Vessels Subjected to Hypervelocity Impact

PDF

Topics: Pressure vessels , Fracture (Materials) , Vessels , Crack propagation , Damage , Fracture mechanics , High pressure (Physics) , Leakage , Particulate matter , Simulation

Estimation of Plastic Collapse Load of Steam Generator Tube With Two Parallel Axial Through-Wall Cracks

S. I. Moon, Y. J. Kim, J. H. Lee

PVP 2003; 223-229https://doi.org/10.1115/PVP2003-2067

Abstract

View Articletitled, Estimation of Plastic Collapse Load of Steam Generator Tube With Two Parallel Axial Through-Wall Cracks

PDF

Topics: Boilers , Collapse , Fracture (Materials) , Stress , Failure , Finite element analysis , In-service inspection

Heat Transfer Simulation in the Mould With Generalized Curvilinear Formulation

M. L. M. Eliseu, C. Monteiro, A. I. Rouboa

PVP 2003; 231-237https://doi.org/10.1115/PVP2003-2060

Abstract

View Articletitled, Heat Transfer Simulation in the Mould With Generalized Curvilinear Formulation

PDF

Topics: Heat transfer , Simulation , Solidification , Cooling , Design , Finite volume methods , Flow (Dynamics) , Geometry , Metals

All Years

Investigation of Residual Stresses Caused by Welding, Cladding and Tempering of Reactor Pressure Vessels

Allowance for Residual Stresses and Material Interfaces When Calculating J in and Close to Welded Joints

Optimized Conditions for Tensile Residual Stress Reducing Weld Using Water-Shower Cooling

Virtual Fabrication Technology Weld Modeling Tool and Its Applications in Distortion Predictions

Creep Behavior of a Bimetallic Welded Joint in a Nuclear Piping System

Crack Growth Behavior in a Residual Stress Field for Vessel Type Structures

Effect of Plasticity on Fatigue Life of Welded Nuclear Component With Local Brittle Zone

Fracture Assessment of the High Strength Super-Martensitic Stainless Steel Welds by SINTAP Defect Assessment Procedure

Dynamic Analysis of a Radioactive Material Package Primary Containment Vessel in a High Pressure Event

Prediction of the Cutting Forces on Stainless Steels When Using a Turning Process

Die Design and Blanking Analysis

Implementation of an Outer Can Welding System for Savannah River Site Plutonium Processing Facility

Innovative Flash Control in Inertia Welding

Two Numerical Models for Prediction of an Industrial Concasting Process

Repair of a Melter Pour Spout Using an Expanding Ring

Assessment of the Possibility of Operating Pipelines With Defects

Strength of Pipelines With Corrosion Defects

Experimental Assessment of Material Strength of Two Operating Main Oil Pipelines

Analytical Solutions of Crack Tip Plasticity Zone Shape for a Semi-Infinite Crack

Verification of a Finite Element Analysis Procedure for Modeling the Nonlinear, Monotonic In-Plane Behavior of 4 Inch, Schedule 10, Stainless Steel, 90° Elbows

Burst Pressure Predictions of Cracked Pipelines Using a Micromechanics Approach

Damping Effect in Fluid-Structure Interaction: Application to Slamming Problem

Parallel Computations of the Dynamic Behavior of Bubble Plumes

Application of the Linear Matching Method to Cracked Bodies

Study of Burst Conditions of Thin-Walled Pressure Vessels Subjected to Hypervelocity Impact

Estimation of Plastic Collapse Load of Steam Generator Tube With Two Parallel Axial Through-Wall Cracks

Heat Transfer Simulation in the Mould With Generalized Curvilinear Formulation

Email alerts

Most Read Proceedings Papers in PVP

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Proceedings Papers

Email alerts

Most Read Proceedings Papers in PVP

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only