Three-dimensional (3-D) flowfield data has been obtained using Particle Image Velocimetry (PIV) for varying swirl distributions in the burner. The 3-D data also allows one determine the local swirl number of the resulting flow. Flow characteristics of the resulting flowfield, both without and with combustion, have been examined for the effect of co- and counter-swirl under lean direct injection conditions using unconfined and confined combustor geometry. Experimental results of the effect of swirl and combustion are presented to simulate the flow dynamics of Lean Direct Injection (LDI) configuration gas turbine combustion. The selected configuration is typical because it does not make use a premixing zone and relies totally on the swirl and the injector to accomplish rapid mixing. Specifically, the effect of radial distribution of combustion air and swirl in a burner are examined under non-burning and burning conditions using propane as the fuel. The present study explores single swirler interaction with the use of an experimental double concentric swirl burner that simulates one swirler of a practical gas turbine combustor. Results showed that both swirl and combustion has significant effect on the characteristics of the internal and external recirculation zones. The calculated local swirl number differs significantly form that estimated using geometrical relationship derived from the vane angle only. The effect of combustion for the confined and unconfined geometries was also been found to be different. In the confined geometry combustion decreases the size of the recirculation zone. This is in contrast to that found for the unconfined conditions. Combustion enhances the recirculation zone in the unconfined geometry. Combustion provides greater velocity magnitudes than their counter non-combustion conditions. The counter-swirl combination resulted in smaller and more well defined internal recirculation regions. The results provide the role of swirl and combustion on the mean and turbulence characteristics of flows over a range of swirl and shear conditions between the inner and outer flow of the burner. This data provides important insights on the flow dynamics in addition to providing data for model validation and model development.
Confinement Effects on Flow Dynamics in Swirling Flames
- Views Icon Views
- Share Icon Share
- Search Site
Archer, S, & Gupta, AK. "Confinement Effects on Flow Dynamics in Swirling Flames." Proceedings of the ASME 2005 Power Conference. ASME 2005 Power Conference. Chicago, Illinois, USA. April 5–7, 2005. pp. 717-726. ASME. https://doi.org/10.1115/PWR2005-50167
Download citation file: