Skip Nav Destination
Proceedings Papers
ASME 2016 Power Conference collocated with the ASME 2016 10th International Conference on Energy Sustainability and the ASME 2016 14th International Conference on Fuel Cell Science, Engineering and Technology
June 26–30, 2016
Charlotte, North Carolina, USA
Conference Sponsors:
- Power Division
- Advanced Energy Systems Division
- Solar Energy Division
- Nuclear Engineering Division
ISBN:
978-0-7918-5021-3
In This Volume
ASME 2016 Power Conference
Boilers and Heat Recovery Steam Generators
Thermal Performance and Stress Monitoring of Power Boiler
Jan Taler, Bohdan Węglowski, Tomasz Sobota, Dawid Taler, Marcin Trojan, Piotr Dzierwa, Magdalena Jaremkiewicz, Marcin Pilarczyk
POWER 2016; V001T01A001https://doi.org/10.1115/POWER2016-59082
Topics:
Boilers
,
Flow (Dynamics)
,
Furnaces
,
Heat
,
Stress
,
Superheaters
,
Water tube boilers
Comparisons of Aqueous Surfactant Solutions for Nucleate Pool Boiling
POWER 2016; V001T01A003https://doi.org/10.1115/POWER2016-59351
Topics:
Nucleate pool boiling
,
Surfactants
,
Boiling
,
Water
,
Bubbles
,
Heat transfer
,
Collapse
,
Heat transfer coefficients
,
Sodium
,
Visualization
Pool Boiling Heat Transfer Enhancement With Structured Surfaces
POWER 2016; V001T01A004https://doi.org/10.1115/POWER2016-59364
Topics:
Heat transfer
,
Pool boiling
,
Heat transfer coefficients
,
Bubbles
,
Heat
,
Shapes
,
Temperature
,
Atmospheric pressure
,
Boiling
,
Cooling
Combustion Turbines
Producing the World’s Finest Heat Engine
POWER 2016; V001T02A001https://doi.org/10.1115/POWER2016-59103
Topics:
Heat engines
,
Design
,
Aircraft propulsion
,
Durability
,
Energy efficiency
,
Energy generation
,
Engineering disciplines
,
Engines
,
Gas turbines
,
Innovation
Application of Ramberg-Osgood Plasticity to Determine Cyclic Hardening Parameters
POWER 2016; V001T02A003https://doi.org/10.1115/POWER2016-59317
Topics:
Hardening
,
Plasticity
,
Constitutive equations
,
Creep
,
Engineering simulation
,
Simulation
,
Temperature
,
Alloys
,
Approximation
,
Energy generation
Effect of Blade Deflection Angles, Pressure Drop, Flow and Work Co-Efficients on Stage Performance of a Gas Turbine Shrouded HP Compressor Blade
POWER 2016; V001T02A004https://doi.org/10.1115/POWER2016-59328
Topics:
Blades
,
Compressors
,
Deflection
,
Flow (Dynamics)
,
Gas turbines
,
Pressure drop
,
Creep
,
Diffusion (Physics)
,
Rotors
,
Design
Design Optimization of T-Root Geometry of a Gas Engine HP Compressor Rotor Blade for Lifing the Blade Against Fretting Failure
POWER 2016; V001T02A005https://doi.org/10.1115/POWER2016-59331
Topics:
Blades
,
Compressors
,
Design
,
Engines
,
Failure
,
Geometry
,
Optimization
,
Rotors
,
Stress
,
Dimensions
Transient Stress Analysis and High Cycle Fatigue Life Estimation of a Gas Turbine Shrouded HP Compressor Blade
POWER 2016; V001T02A006https://doi.org/10.1115/POWER2016-59336
Topics:
Blades
,
Compressors
,
Gas turbines
,
High cycle fatigue
,
Stress analysis (Engineering)
,
Transients (Dynamics)
,
Finite element analysis
,
Stress
,
Cycles
,
Design
Fuels, Combustion and Material Handling
Burning Methanol and its Blends Attractive Alternative for Emission Reduction
POWER 2016; V001T03A001https://doi.org/10.1115/POWER2016-59025
Topics:
Combustion
,
Emissions
,
Methanol
,
Fuels
,
Nitrogen oxides
,
Boilers
,
Diesel
,
Heat
,
Fuel oils
,
Diesel engines
Theoretical Study on Chemical-Kinetic Characteristics of Oxy-Coal Mild Combustion
POWER 2016; V001T03A002https://doi.org/10.1115/POWER2016-59032
Topics:
Coal
,
Combustion
,
Oxygen
,
Flames
,
Temperature
,
Benzene
,
Chemical reactions
,
High temperature
,
Oxidation
,
Reaction rate constants
Simulation and Validation of Hydrogen Production From Hydrogen Sulfide Pyrolysis
POWER 2016; V001T03A003https://doi.org/10.1115/POWER2016-59036
Topics:
Hydrogen
,
Hydrogen production
,
Pyrolysis
,
Simulation
,
Temperature
,
Flow (Dynamics)
,
Sulfur
,
Chemical reactions
,
Computer simulation
,
Equilibrium (Physics)
Role of Catalyst in Solid Biomass Gasification
POWER 2016; V001T03A004https://doi.org/10.1115/POWER2016-59039
Topics:
Biomass
,
Catalysts
,
Fuel gasification
,
Carbon dioxide
,
Gases
,
Methane
,
Alkali metals
,
Energy recovery
,
Energy sustainability
,
Fuels
Role of Fuel Injection Scheme in a High Intensity Combustor
POWER 2016; V001T03A005https://doi.org/10.1115/POWER2016-59043
Topics:
Combustion chambers
,
Fuels
,
Ejectors
,
Emissions
,
Combustion
,
Stress
,
Air flow
,
Gates (Closures)
,
Heat
,
Ignition
Fuel Property Effects on the Fate of Volume Distributed Combustion
POWER 2016; V001T03A006https://doi.org/10.1115/POWER2016-59050
Topics:
Combustion
,
Fuels
,
Emissions
,
Oxygen
,
Temperature
,
Combustion chambers
,
Gases
,
Methane
,
Carbon dioxide
,
Hydrogen
Combustion and Emissions Characteristics of a Brassica Carinata FAME and N-Butanol Blend
POWER 2016; V001T03A007https://doi.org/10.1115/POWER2016-59397
Topics:
Combustion
,
Emissions
,
Biodiesel
,
Computer-aided design
,
Fuels
,
Heat
,
Nitrogen oxides
,
Diesel
,
Diesel engines
,
Diffusion (Physics)
Indirect Combustion Technology With Renewable Non-Edible Transesterified Oil Feedstock
POWER 2016; V001T03A008https://doi.org/10.1115/POWER2016-59398
Topics:
Combustion technologies
,
Feedstock
,
Biodiesel
,
Engines
,
Heat
,
Nitrogen oxides
,
Brakes
,
Combustion
,
Computer-aided design
,
Convection
Wet Partial Oxidation of JP8 in a Well-Insulated Reactor
POWER 2016; V001T03A009https://doi.org/10.1115/POWER2016-59515
Topics:
Oxidation
,
Carbon
,
Steam
,
Hydrogen
,
Coke
,
Computer simulation
,
Flames
,
Fuel cells
,
Methane
,
Oxygen
Assessment the Safety of Alternative Aviation Fuels in Aero-Engine
POWER 2016; V001T03A010https://doi.org/10.1115/POWER2016-59520
Topics:
Aircraft engines
,
Aviation
,
Fuels
,
Safety
,
Engines
,
Petroleum
,
Testing
,
Turbines
,
Acceptance criteria
Investigation of Flame Height From Multiple Liquefied Natural Gas Fire
POWER 2016; V001T03A011https://doi.org/10.1115/POWER2016-59567
Topics:
Fire
,
Flames
,
Liquefied natural gas
,
Jets
,
Temperature
,
Engineering simulation
,
Numerical analysis
,
Resolution (Optics)
,
Separation (Technology)
,
Shapes
Measurements of Hydrogen Enriched Combustion of Jet Fuel in Open Flame
POWER 2016; V001T03A012https://doi.org/10.1115/POWER2016-59591
Topics:
Combustion
,
Flames
,
Hydrogen
,
Jet fuels
,
Fuels
,
Emissions
,
Density
,
Diesel engines
,
Flow (Dynamics)
,
Generators
Heat Exchangers, Condensers, Cooling Systems, and Balance-of-Plant
Guidelines and Techniques for the Effective Control of Condensate Dissolved Oxygen in Steam Surface Condensers
POWER 2016; V001T04A001https://doi.org/10.1115/POWER2016-59004
Topics:
Condensed matter
,
Condensers (steam plant)
,
Oxygen
,
Steam
,
Corrosion
,
Design
,
Failure
,
Maintenance
,
Power stations
Evacuation Systems for Steam Surface Condensers: Vacuum Pumps or Steam Jet Air Ejectors?
POWER 2016; V001T04A002https://doi.org/10.1115/POWER2016-59067
Topics:
Condensers (steam plant)
,
Ejectors
,
Evacuations
,
Steam
,
Vacuum pumps
,
Steam turbines
,
Pressure
,
Design
,
Atmospheric pressure
,
Electric motors
Dry Air Turbo-Compression Cooling
POWER 2016; V001T04A003https://doi.org/10.1115/POWER2016-59152
Topics:
Compression
,
Cooling
,
Turbochargers
,
Compressors
,
Heat exchangers
,
Waste heat
,
Condensers (steam plant)
,
Cycles
,
Evaporative cooling
,
Power stations
Dynamic Modeling and Experimental Analysis of Induced Draft Cooling Tower
POWER 2016; V001T04A004https://doi.org/10.1115/POWER2016-59155
Topics:
Cooling towers
,
Dynamic modeling
,
Experimental analysis
,
Water
,
Energy consumption
,
Air flow
,
Cooling
,
Dynamic models
,
Energy efficiency
,
Flow (Dynamics)
Development of a Ceramic Heat Exchanger for Application as Solid Oxide Fuel Cell Cathode Air Preheater
POWER 2016; V001T04A006https://doi.org/10.1115/POWER2016-59333
Topics:
Ceramics
,
Heat exchangers
,
Solid oxide fuel cells
,
Heat
,
Alloys
,
Design
,
Heat transfer
,
Metals
,
Pressure
,
Pressure drop
Influence of Rotational Speed on Thermal Performance of Tri-Sector Rotary Regenerative Air Preheater
Xun Chen, Xue-nong Duan, Li-min Wang, Yi Yang, Dun-dun Wang, Yi-ping Chen, Guang-ming Zhu, De-fu Che
POWER 2016; V001T04A009https://doi.org/10.1115/POWER2016-59551
Topics:
Cooling
,
Equilibrium (Physics)
,
Finite difference methods
,
Fluids
,
Fuel gasification
,
Heat transfer
,
Heating
,
Metals
,
Rotation
,
Rotors
Retracted: “Benchmark Thermodynamic Modelling Comparison of a Novel Modular Air-Cooled Condenser With Current Dry-Cooling Methodologies” [ASME 2016 Power Conference collocated with the ASME 2016 10th International Conference on Energy Sustainability and the ASME 2016 14th International Conference on Fuel Cell Science, Engineering and Technology, ASME 2016 Power Conference, Charlotte, North Carolina, USA, June 26–30, 2016, Conference Sponsors: Power Division, Advanced Energy Systems Division, Solar Energy Division, Nuclear Engineering Division, ISBN: 978-0-7918-5021-3. Paper No. POWER2016-59589, pp. V001T04A010; 9 pages; doi:10.1115/POWER2016-59589]
POWER 2016; V001T04A010https://doi.org/10.1115/POWER2016-59589
Plant Operations, Reliability, and Performance
Challenges in Meeting the Electricity Needs of South Africa
POWER 2016; V001T05A002https://doi.org/10.1115/POWER2016-59085
Topics:
Delays
,
Emissions
,
Erosion
,
Governments
,
Maintenance
,
Plant maintenance
,
Polishing equipment
,
Power stations
,
Power systems (Machinery)
,
Security
Generalized Regeneration Theory and its Energy Saving and Emission Reduction Effects on Coal-Fired Power Generation
POWER 2016; V001T05A005https://doi.org/10.1115/POWER2016-59166
Topics:
Coal
,
Emissions
,
Energy generation
,
Boilers
,
Power stations
,
Combustion
,
Pressure
,
Stress
,
Temperature
,
Climate change
The Application of Smart, Connected Power Plant Assets for Enhanced Condition Monitoring and Improving Equipment Reliability
POWER 2016; V001T05A006https://doi.org/10.1115/POWER2016-59189
Topics:
Condition monitoring
,
Power stations
,
Reliability
,
Maintenance
,
Coal
,
Uncertainty
,
Computer software
,
Failure
,
Combustion
,
Corrective actions
Performance Analyze of Ultra-Low Emission of Thermal Power Generation Based on Multi-Objective Optimization
POWER 2016; V001T05A009https://doi.org/10.1115/POWER2016-59583
Topics:
Emissions
,
Pareto optimization
,
Thermal energy
,
Pollution
,
Coal
,
Power stations
,
Support vector machines
,
Algorithms
,
Boundary-value problems
,
Design
Cross Compound Turbine Generator Unit With Elevated and Conventional Turbine Layouts
POWER 2016; V001T05A010https://doi.org/10.1115/POWER2016-59720
Topics:
Turbines
,
Turbogenerators
,
Design
,
Coal
,
Electric power generation
,
Heat losses
,
High temperature
,
Manufacturing
,
Pipes
,
Power stations
Posters
Exergetic and Economic Analysis of Subcooling and Superheating Effect on Vapor Compression Refrigeration System
POWER 2016; V001T06A001https://doi.org/10.1115/POWER2016-59492
Topics:
Compression
,
Economic analysis
,
Refrigeration
,
Subcooling
,
Superheating
,
Vapors
,
Temperature
,
Compressors
,
Condensers (steam plant)
,
Energy consumption
Regulatory, Codes, and Standards Compliance
Renewables: Solar, Wind, Hydro, and Geothermal
Feasibility Study of the Use of Ground-Coupled Condensers in Industrial Thermal Management
POWER 2016; V001T08A001https://doi.org/10.1115/POWER2016-59074
Topics:
Condensers (steam plant)
,
Thermal management
,
Heat
,
Cooling
,
Cooling systems
,
Design
,
Heat exchangers
,
Heat sinks
,
Pipes
,
Power stations
Simulation of Tethered Underwater Kites: Three Dimensional Trajectories for Power Generation
POWER 2016; V001T08A002https://doi.org/10.1115/POWER2016-59141
Topics:
Energy generation
,
Simulation
,
Cable reels
,
Computer simulation
,
Flow (Dynamics)
,
Fluid-dynamic forces
,
Tension
,
Airfoils
,
Generators
,
Hooke's law
A Numerical Study on the Performance of Fixed Oscillating Water Column Wave Energy Converter at Steep Waves
POWER 2016; V001T08A003https://doi.org/10.1115/POWER2016-59142
Topics:
Water
,
Wave energy converters
,
Waves
,
Absorption
,
Nonlinear waves
,
Damping
,
Computational fluid dynamics
,
Computer software
,
Engineering simulation
,
Fluids
The Straight-Bladed Morphing Vertical Axis Wind Turbine
POWER 2016; V001T08A004https://doi.org/10.1115/POWER2016-59192
Topics:
Vertical axis wind turbines
,
Blades
,
Horizontal axis wind turbines
,
Turbines
,
Design
,
Engineering simulation
,
Fluids
,
Geometry
,
Simulation
,
Torque
Analysis of a Renewable Energy Based System Using Nanofluids for Power Generation
POWER 2016; V001T08A006https://doi.org/10.1115/POWER2016-59235
Topics:
Energy generation
,
Nanofluids
,
Renewable energy
,
Storage
,
Nanoparticles
,
Cycles
,
Rankine cycle
,
Copper
,
Fluids
,
Heating
Numerical Modeling of Liquid-to-Vapor Phase Change in Porous Medium Under Solar Heat Localization
POWER 2016; V001T08A008https://doi.org/10.1115/POWER2016-59259
Topics:
Computer simulation
,
Porous materials
,
Solar heating
,
Vapors
,
Evaporation
,
Solar energy
,
Steam
,
Computer-aided design
,
Fluid dynamics
,
Water
Site Characterization and the Aerodynamics of an Offshore Wind Power Plant: Statistical, Numerical and Analytical Approaches
POWER 2016; V001T08A009https://doi.org/10.1115/POWER2016-59303
Topics:
Aerodynamics
,
Analytical methods
,
Ocean engineering
,
Wind farms
,
Blades
,
Wind
,
Wind velocity
,
Errors
,
Rotors
,
Statistical distributions
An Integrated Design Approach of Local Control System of a Linear Drive Single Facet Heliostat
POWER 2016; V001T08A011https://doi.org/10.1115/POWER2016-59375
Topics:
Control systems
,
Design
,
Screws
,
Actuators
,
Solar power stations
,
Control equipment
,
Design methodology
,
Dynamic models
,
Engines
,
Errors
Design of a Partial Admission Turbine for an Organic Rankine Cycle With Environmental Fluctuation Consideration
POWER 2016; V001T08A012https://doi.org/10.1115/POWER2016-59386
Topics:
Design
,
Organic Rankine cycle
,
Turbines
,
Rotors
,
Bearings
,
Contamination
,
Dynamics (Mechanics)
,
Engineering prototypes
,
Fluids
,
Foil bearings
Generator Outages and Using Incentive Based Demand Response to Diminish Economic Impact
POWER 2016; V001T08A013https://doi.org/10.1115/POWER2016-59415
Topics:
Generators
,
Volatility
,
Public utilities
,
Reliability
,
Risk
Experimental Study on Thermal Storage Performance of Cylindrically Encapsulated PCM in a Cylindrical Storage Tank With Axial Flow
Chatura Wickramaratne, Francesca Moloney, Tolga Pirasaci, Rajeev Kamal, D. Y. Goswami, Elias Stefanakos, Jaspreet Dhau
POWER 2016; V001T08A014https://doi.org/10.1115/POWER2016-59427
Topics:
Axial flow
,
Storage tanks
,
Thermal energy storage
,
Cycles
,
Energy efficiency
,
Energy storage
,
Exergy
,
Heat
,
Latent heat
,
Phase change materials
Cost Performance Tradeoff Study of Wind Systems: Grid-Scale Storage
POWER 2016; V001T08A015https://doi.org/10.1115/POWER2016-59461
Topics:
Storage
,
Tradeoffs
,
Wind
,
Emissions
,
Energy generation
,
Energy resources
,
Energy storage
,
Natural gas
,
Reliability
,
Security
Enhancement in Photovoltaic Performance of Dye Sensitized Solar Cells Using Cu and Cu:Ag Co-Doped TiO2 Photoanode
POWER 2016; V001T08A016https://doi.org/10.1115/POWER2016-59477
Topics:
Solar cells
,
Silver
,
Thin films
,
Blades
,
Copper
,
Crystals
,
Electrodes
,
Electrolytes
,
Light absorption
,
Nanoparticles
One-Dimensional and Three-Dimensional Numerical Optimization and Comparison of Single-Stage Supersonic and Dual-Stage Transonic Radial Inflow Turbines for the ORC
POWER 2016; V001T08A017https://doi.org/10.1115/POWER2016-59508
Topics:
Inflow
,
Optimization
,
Organic Rankine cycle
,
Turbines
,
Cycles
,
Thermal efficiency
,
Computational fluid dynamics
,
Shock waves
,
Fluids
,
Genetic algorithms
Revisiting Parabolic Trough Concentrators for Industrial Process Heat in the United States
POWER 2016; V001T08A018https://doi.org/10.1115/POWER2016-59621
Topics:
Heat
,
Parabolic troughs
,
Solar energy
,
Natural gas
,
Design
,
Hardware
,
Heat exchangers
,
Manufacturing
,
Pipes
,
Solar collectors
Mechanical Stress Optimisation in a Directly Illuminated Supercritical Carbon Dioxide Solar Receiver
POWER 2016; V001T08A019https://doi.org/10.1115/POWER2016-59664
Topics:
Optimization
,
Solar energy
,
Stress
,
Supercritical carbon dioxide
,
Design
,
Pipes
,
Temperature gradient
,
Construction
,
Creep
,
Heat
Steam Turbine-Generators, Electric Generators, Transformers, Switchgears, Electric BOP and Auxiliaries
Integrating Isolation Valve Specifications Into Supercritical Power Plant Piping Design Specifications
POWER 2016; V001T09A001https://doi.org/10.1115/POWER2016-59081
Topics:
Piping design
,
Power stations
,
Valves
,
Pipes
,
Design
,
Engineers
,
Fatigue
,
Flow (Dynamics)
,
Boundary-value problems
,
Design methodology
Damage Mechanisms Found in Generator Rotor 18Mn18Cr Retaining Rings
POWER 2016; V001T09A002https://doi.org/10.1115/POWER2016-59101
Topics:
Damage
,
Generators
,
Rotors
,
Inspection
,
Acceptance criteria
,
Corrosion
,
Cracking (Materials)
,
Failure
,
Fluorescence
,
Fracture (Materials)
A Study on Superheat Utilization of Extraction Steam in a 1000MW Double Reheat Ultra-Supercritical Unit
POWER 2016; V001T09A003https://doi.org/10.1115/POWER2016-59129
Topics:
Steam
,
Coal
,
Feedwater
,
Temperature
,
Flow (Dynamics)
,
Heat
,
Turbines
,
China
,
Design
,
Exergy
Generator Collector Brush Holder Testing and Design Improvements
POWER 2016; V001T09A004https://doi.org/10.1115/POWER2016-59147
Topics:
Design
,
Generators
,
Testing
,
Carbon
,
Maintenance
,
Wear
,
Engineering prototypes
,
Excitation
,
Excitation systems
,
Feedback
Rapid H2 Purge With CO2 for Safer Plant Operations: Test Run Results
POWER 2016; V001T09A005https://doi.org/10.1115/POWER2016-59257
Topics:
Carbon dioxide
,
Generators
,
Hydrogen
,
Safety
,
Temperature
,
Downtime
,
Explosions
,
Gases
,
Instrumentation
,
Pipes
Fundamentals of a Babbitted Bearing Repair Assistant
POWER 2016; V001T09A006https://doi.org/10.1115/POWER2016-59389
Topics:
Bearings
,
Maintenance
,
Babbitt metal
,
Damage
,
Machinery
,
Fluid films
,
Stress
,
Bearing design
,
Engineers
,
Excitation systems
Student Competition
Design and Performance of a Small Hybrid Solar Collector
Alex Zielinski, Heather Dillon, Becca Baldwin, Caitlin Forinash, Kyle Zada, Chad Stillinger, Keaton Dieter
POWER 2016; V001T10A001https://doi.org/10.1115/POWER2016-59098
Topics:
Absorption
,
Data collection
,
Design
,
Flat plates
,
Flow (Dynamics)
,
Solar collectors
,
Solar energy
,
Solar radiation
,
System efficiency
,
Temperature
Aero Structure Interaction for Mechanical Integration of Laced LP Compressor Blades in a Gas Engine Rotor
POWER 2016; V001T10A003https://doi.org/10.1115/POWER2016-59319
Topics:
Blades
,
Compressors
,
Engines
,
Rotors
,
Design
,
Gas turbines
,
Stress
,
Wire
,
Aircraft engines
,
Airfoils
Feasibility Study of SMART MONOFLOAT Hydrokinetic Power for the Rural Households in Naga Hammadi, Egypt
POWER 2016; V001T10A005https://doi.org/10.1115/POWER2016-59540
Topics:
Hydropower
,
Computer software
,
Dams
,
NASA
,
Water
,
Batteries
,
Construction
,
Databases
,
Diesel
,
Diesel generators
Harvesting Natural Salinity Gradient Energy for Hydrogen Production Through Reverse Electrodialysis (RED) Power Generation
POWER 2016; V001T10A006https://doi.org/10.1115/POWER2016-59565
Topics:
Energy generation
,
Hydrogen production
,
Membranes
,
Hydrogen
,
Current density
,
Power density
,
Stress
,
Electric current
,
Electrodes
,
Energy conversion
A Levelized Cost of Energy (LCOE) Model for Wind Farms That Includes Power Purchase Agreement (PPA) Energy Delivery Limits
POWER 2016; V001T10A007https://doi.org/10.1115/POWER2016-59608
Topics:
Wind farms
,
Risk
,
Wind
,
Energy generation
,
Generators
,
Performance characterization
,
Pressure
,
Renewable energy sources
,
Sales
,
Wind energy
Research on Flow-Induced Energy Harvesting by Flexible Piezoelectric Plate With Upstream Square Cylinder
POWER 2016; V001T10A008https://doi.org/10.1115/POWER2016-59659
Topics:
Cylinders
,
Energy harvesting
,
Flow (Dynamics)
,
Wind velocity
,
Electromagnetic radiation
,
Generators
,
Deformation
,
Fluids
,
Plates (structures)
,
Wind
Thermal Hydraulics and CFD
Numerical Study on Flame Mesoscopic-Characteristics of Oxy-Coal Mild Combustion
POWER 2016; V001T11A001https://doi.org/10.1115/POWER2016-59006
Topics:
Coal
,
Combustion
,
Flames
,
Mesoscopic systems
,
Furnaces
,
Oxygen
,
Turbulence
,
Chemistry
,
Design
,
Flow (Dynamics)
Hydraulic Model Calibration of a Nuclear Plant Service Water System
POWER 2016; V001T11A002https://doi.org/10.1115/POWER2016-59062
Topics:
Calibration
,
Nuclear power stations
,
Water
,
Pipes
,
Computer software
,
Flow (Dynamics)
,
Corrosion
,
Hydraulics
,
Modeling
,
Pressure drop
Numerical Investigation of the Flow Fields and Thermal Patterns in a Large Cold Store (I)
POWER 2016; V001T11A003https://doi.org/10.1115/POWER2016-59077
Topics:
Air flow
,
Computational fluid dynamics
,
Design
,
Flow (Dynamics)
,
Food products
,
Refrigeration
,
Storage
,
Stress
,
Temperature
,
Warfare
Numerical Modeling and Simulation of Injection Cooling and Wet Gas Compression
POWER 2016; V001T11A007https://doi.org/10.1115/POWER2016-59400
Topics:
Compression
,
Computer simulation
,
Cooling
,
Simulation
,
Drops
,
Computational fluid dynamics
,
Cycles
,
Compressors
,
Flow (Dynamics)
,
Gates (Closures)
Numerical Modeling and Simulation of Viscous Shear in Hydrostatic Bearing
POWER 2016; V001T11A008https://doi.org/10.1115/POWER2016-59410
Topics:
Bearings
,
Computer simulation
,
Hydrostatics
,
Shear (Mechanics)
,
Simulation
,
Temperature
,
Flow (Dynamics)
,
Load bearing capacity
,
Stress
,
Viscosity
Heat Transfer Characteristics of Subcooled Water Flow Boiling in Circular Channels With Non-Uniform Heating Fluxes
POWER 2016; V001T11A009https://doi.org/10.1115/POWER2016-59475
Topics:
Boiling
,
Flow (Dynamics)
,
Flux (Metallurgy)
,
Heat transfer
,
Heating
,
Subcooling
,
Water
,
Heat
,
Computational fluid dynamics
,
Temperature
Numerical Study on Layout of Refractory Belt and Fouling Deposition in Tangentially Fired Boiler
POWER 2016; V001T11A011https://doi.org/10.1115/POWER2016-59570
Topics:
Belts
,
Boilers
,
Furnaces
,
Temperature
,
Combustion
,
Particulate matter
,
Coal
,
Ignition
,
Ignition delay
,
Simulation
Design and Application of Low Flow Steam Siphon Jet Pumps
POWER 2016; V001T11A013https://doi.org/10.1115/POWER2016-59748
Email alerts
Most Read Proceedings Papers in POWER
POWER2024 Front Matter
POWER2024