Skip Nav Destination
Proceedings Papers
ASME 2015 Power Conference collocated with the ASME 2015 9th International Conference on Energy Sustainability, the ASME 2015 13th International Conference on Fuel Cell Science, Engineering and Technology, and the ASME 2015 Nuclear Forum
June 28–July 2, 2015
San Diego, California, USA
Conference Sponsors:
- Power Division
ISBN:
978-0-7918-5660-4
In This Volume
ASME 2015 Power Conference
Advanced Energy Systems: Wind, Solar and Geothermal
Wave-Powered Desalination
POWER 2015; V001T01A001https://doi.org/10.1115/POWER2015-49087
Topics:
Waves
,
Water
,
Wave energy
,
Climate change
,
Computer software
,
Modeling
,
Seawater
,
Shorelines
,
Sustainability
Feasibility of Matching Wind and Wave Energy Conversion for an Integrated Design Concept
POWER 2015; V001T01A002https://doi.org/10.1115/POWER2015-49108
Topics:
Design
,
Wave energy
,
Wind
,
Waves
,
Computer software
,
Modeling
,
Shorelines
,
Wind turbines
Auto-Mapping of Tactical Grid Topology Through the Use of a Power Beacon
POWER 2015; V001T01A004https://doi.org/10.1115/POWER2015-49158
Topics:
Topology
,
Testing
,
Noise (Sound)
,
Stress
,
Design
,
Control systems
,
Emergency power
,
Feedback
,
Filters
,
Generators
Experimental Study of the Influence of Light Intensity on Solar ORC Power Generation System
POWER 2015; V001T01A005https://doi.org/10.1115/POWER2015-49175
Topics:
Energy / power systems
,
Organic Rankine cycle
,
Solar energy
,
Fluids
,
System efficiency
,
Heat transfer
,
Low temperature
,
Temperature
,
Design
,
Energy generation
Combined Convective-Radiative Thermal Analysis of a Solar Flat-Plate Collector
POWER 2015; V001T01A007https://doi.org/10.1115/POWER2015-49198
Topics:
Flat plates
,
Solar energy
,
Thermal analysis
,
Water
,
Convection
,
Energy budget (Physics)
,
Flow (Dynamics)
,
Flux (Metallurgy)
,
Heat
,
Heat transfer
Solar Desalination System Model for Sizing of Photovoltaic Reverse Osmosis (PVRO)
POWER 2015; V001T01A009https://doi.org/10.1115/POWER2015-49386
Topics:
Reverse osmosis
,
Solar energy
,
Optimization algorithms
,
Water
,
Construction
,
Design
,
Maintenance
,
Seas
,
Shorelines
,
Solar radiation
Cost Performance Tradeoff Study of Power Generation From Wind
POWER 2015; V001T01A010https://doi.org/10.1115/POWER2015-49440
Topics:
Energy generation
,
Tradeoffs
,
Wind
,
Stress
,
Emissions
,
Storage
,
Carbon dioxide
,
Electric power generation
,
Fossil fuels
,
Modeling
Design of a 100 kW Concentrated Solar Power on Demand Volumetric Receiver With Integral Thermal Energy Storage Prototype
Antoni Gil, Daniel S. Codd, Lei Zhou, David Trumper, Ronald B. Campbell, Benjamin Grange, Nicolas Calvet, Peter Armstrong, Alexander H. Slocum
POWER 2015; V001T01A011https://doi.org/10.1115/POWER2015-49504
Water-Ammonia Cycles for the Utilization of Low Temperature Geothermal Resources
POWER 2015; V001T01A014https://doi.org/10.1115/POWER2015-49531
Topics:
Cycles
,
Geothermal engineering
,
Low temperature
,
Water
,
Condensers (steam plant)
,
Fluids
,
Heat
,
Temperature
,
Pressure
,
Thermodynamic power cycles
A Computer Program for Working Fluid Selection of Low Temperature Organic Rankine Cycle
POWER 2015; V001T01A016https://doi.org/10.1115/POWER2015-49691
Topics:
Computer software
,
Fluids
,
Low temperature
,
Organic Rankine cycle
,
Heat
,
Design
,
Energy generation
,
Energy resources
,
Fossil fuels
,
Exergy
Energy Water Nexus
Modeling Power Generation Water Usage
POWER 2015; V001T02A001https://doi.org/10.1115/POWER2015-49097
Topics:
Energy generation
,
Modeling
,
Water
,
Cooling
,
Temperature
,
Power stations
,
Water temperature
,
Circuits
,
Cooling systems
,
Cooling towers
Water Consumption of Cooling Towers in Different Climatic Zones of the U. S.
POWER 2015; V001T02A002https://doi.org/10.1115/POWER2015-49201
Topics:
Cooling towers
,
Water
,
Water reuse
,
Climate
,
Computer software
,
Evaporation
,
Heat
,
Mass transfer
,
Solar radiation
,
Temperature
Numerical Simulation of Low Grade Heat and Water Recovery Using Nanoporous Transport Membrane Condensers Bundle Tubes
POWER 2015; V001T02A003https://doi.org/10.1115/POWER2015-49495
Topics:
Computer simulation
,
Condensers (steam plant)
,
Membranes
,
Waste heat
,
Water reuse
,
Flue gases
,
Heat exchangers
,
Boilers
,
Carbon dioxide
,
Ceramics
Fuels, Combustion and Material Handling
Acid Gas Simulation for Recovering Syngas and Sulfur
POWER 2015; V001T03A001https://doi.org/10.1115/POWER2015-49014
Topics:
Simulation
,
Sulfur
,
Syngas
,
Pyrolysis
,
Energy generation
,
Fuels
,
Simulation results
,
Temperature
,
Thermal energy
Impact of Internal Entrainment on High Intensity Distributed Combustion
POWER 2015; V001T03A002https://doi.org/10.1115/POWER2015-49034
Topics:
Combustion
,
Emissions
,
Combustion chambers
,
Flames
,
Carbon dioxide
,
Fuels
,
Gases
,
Nitrogen
,
Oxygen
,
Gas turbines
Impact of Oxygen Enriched Air on High Intensity Combustion and Emission
POWER 2015; V001T03A003https://doi.org/10.1115/POWER2015-49037
Topics:
Combustion
,
Emissions
,
Oxygen
,
Combustion chambers
,
Chemiluminescence
,
Temperature
,
Exhaust systems
,
Flames
,
Fuels
,
Heat
Investigation on Gaseous Product Distributions During Co-Pyrolysis of Platanus Wood and Different Rank Coals From Northwestern China in a Drop Tube Furnace
POWER 2015; V001T03A005https://doi.org/10.1115/POWER2015-49073
Topics:
China
,
Coal
,
Furnaces
,
Pyrolysis
,
Wood products
,
Municipal solid wastes
,
Temperature
,
Carbon dioxide
,
Cities
,
Co-firing
Catalytic Oxidation of Jet Fuel Surrogates in a Meso-Scale Combustor
POWER 2015; V001T03A006https://doi.org/10.1115/POWER2015-49208
Topics:
Combustion chambers
,
Jet fuels
,
Oxidation
,
Fuels
,
Catalysts
,
Carbon dioxide
,
Chemical kinetics
,
Combustion
,
Computer software
,
Heat
Analysis of “Finger” Flame Acceleration as a Stage of a Methane-Air-Dust Fire in a Coal Mine
POWER 2015; V001T03A007https://doi.org/10.1115/POWER2015-49240
Topics:
Coal mining
,
Dust
,
Fire
,
Flames
,
Methane
,
Shapes
,
Explosions
,
Combustion
,
Microchannels
,
Touch (physiological)
Investigation on Thermal and Kinetic Characteristics During Pyrolysis and Co-Pyrolysis of Recovered Fuels Obtained From Municipal Solid Waste in China
POWER 2015; V001T03A008https://doi.org/10.1115/POWER2015-49257
Topics:
China
,
Fuels
,
Municipal solid wastes
,
Pyrolysis
,
Fuel gasification
,
Heating
,
Particulate matter
,
Temperature
,
Thermogravimetry
,
Weight (Mass)
Effect of Wall Boundary Conditions on Flame Propagation in Micro-Chambers
POWER 2015; V001T03A009https://doi.org/10.1115/POWER2015-49351
Topics:
Boundary-value problems
,
Flames
,
Friction
,
Dynamics (Mechanics)
,
Pipes
,
Thermal expansion
,
Combustion
,
Cooling
,
Fuels
,
Heat losses
Operability and Performance of Central (Pilot) Stage of an Industrial Prototype Burner
POWER 2015; V001T03A010https://doi.org/10.1115/POWER2015-49449
Topics:
Engineering prototypes
,
Flames
,
Combustion
,
Emissions
,
Flow (Dynamics)
,
Temperature
,
Cooling
,
Fuels
,
Heat
,
Heat losses
Fuel Effects on Nozzle Flow and Spray Using Fully Coupled Eulerian Simulations
POWER 2015; V001T03A012https://doi.org/10.1115/POWER2015-49554
Topics:
Engineering simulation
,
Flow (Dynamics)
,
Fuels
,
Nozzles
,
Simulation
,
Sprays
,
Dynamics (Mechanics)
,
Density
,
Turbulence
,
X-rays
Influence of Excess Air Factor on NOx Emissions From a 200 kW Swirl Burner
POWER 2015; V001T03A013https://doi.org/10.1115/POWER2015-49567
Topics:
Emissions
,
Nitrogen oxides
,
Combustion
,
Temperature
,
Combustion chambers
,
Fuels
,
Flames
,
Modeling
,
Nitrogen
,
Oxidation
Numerical Simulation of Heavy Fuel Oil Combustion Characteristics and NOx Emissions in Calciner in Cement Industry
POWER 2015; V001T03A014https://doi.org/10.1115/POWER2015-49569
Topics:
Cement industry
,
Combustion
,
Computer simulation
,
Emissions
,
Fuel oils
,
Nitrogen oxides
,
Cements (Adhesives)
,
Drops
,
Temperature
,
Viscosity
Successful Implementation of Methanol Firing at 50 MW Gas Turbine for Long Term Operation
POWER 2015; V001T03A015https://doi.org/10.1115/POWER2015-49779
Topics:
Firing
,
Gas turbines
,
Methanol
,
Fuels
,
Emissions
,
Nitrogen oxides
,
Flow (Dynamics)
,
Particulate matter
,
Diesel
,
Nozzles
Long Term Experience of the Real Time Fouling Deposits Thickness Measurements for On-Line Sootblowing Optimization
POWER 2015; V001T03A016https://doi.org/10.1115/POWER2015-49782
Topics:
Optimization
,
Thickness measurement
,
Boilers
,
Coal
,
Biomass
,
Co-firing
,
Furnaces
,
Carbon dioxide
,
Power stations
,
Reflectance
Heat Exchangers and Cooling Systems
Thermal and Mechanical Design Guidelines and General Considerations for the Proper Design, and Location, of Various Types of Service Connections on Steam Surface Condensers
POWER 2015; V001T04A001https://doi.org/10.1115/POWER2015-49001
Topics:
Condensers (steam plant)
,
Design
,
Design engineering
,
Steam
,
Failure
,
Fluids
,
Steam turbines
,
Structural failures
Comprehensive Reduction of Thermal Resistance in Air Cooled Condensers
POWER 2015; V001T04A002https://doi.org/10.1115/POWER2015-49363
Topics:
Condensers (steam plant)
,
Thermal resistance
,
Heat transfer
,
Cooling
,
Heat pipes
,
Steam
,
Water
,
Cooling systems
,
Design
,
Ducts
Post Mortem of a Feedwater Heater With Drains Cooler Failures
POWER 2015; V001T04A003https://doi.org/10.1115/POWER2015-49397
Topics:
Failure
,
Feedwater
,
String
,
Boilers
,
Carbon steel
,
Construction
,
Damage
,
Failure mechanisms
,
High pressure (Physics)
,
Inspection
Improvements in the Performance of a Subcooling Zone in a Feedwater Heater With Dual End Plate Design With Water Seal in Between
POWER 2015; V001T04A004https://doi.org/10.1115/POWER2015-49418
Topics:
Design
,
Feedwater
,
Subcooling
,
Water
,
Steam
,
Patents
,
Plates (structures)
,
Power stations
,
Condensed matter
,
Space
Thermal Performance Enhancement of an Industrial Shell and Tube Heat Exchanger
POWER 2015; V001T04A005https://doi.org/10.1115/POWER2015-49543
Topics:
Heat exchangers
,
Shells
,
Heat transfer coefficients
,
Computer software
,
Cooling
,
Design
,
Heat transfer
,
Natural gas
,
Sales
Performance Study of a Dimpled-Protruded Air-to-Air Plate Heat Exchanger
POWER 2015; V001T04A006https://doi.org/10.1115/POWER2015-49624
Topics:
Heat exchangers
,
Flow (Dynamics)
,
Friction
,
Reynolds number
,
Aluminum plate
,
Fluids
,
Heat
,
Heat transfer coefficients
,
High pressure (Physics)
,
Uncertainty
Performance Testing and Performance Test Codes
Reconciling Compressor Performance Differences for Varying Ambient Inlet Conditions
POWER 2015; V001T05A001https://doi.org/10.1115/POWER2015-49102
Topics:
Compressors
,
Pressure
,
Clearances (Engineering)
,
Reynolds number
,
Rotors
,
Seas
Heat Pump Water Heater Control Strategy Optimization for Cold Climates
POWER 2015; V001T05A003https://doi.org/10.1115/POWER2015-49183
Topics:
Cold climates
,
Heat pumps
,
Optimization
,
Water
,
Heating
,
Climate
,
Stress
,
Heat
,
Hot water
,
Thermal energy storage
Preliminary Analysis of Compressor System Designed for Cyclical Operation
POWER 2015; V001T05A007https://doi.org/10.1115/POWER2015-49550
Topics:
Compressors
,
Cycles
,
Boundary-value problems
,
Design
,
Engines
,
Motors
,
Torque
,
Compressibility
,
Dynamic testing (Materials)
,
Dynamics (Mechanics)
Application of Bio-fAEG: A Biofouling Assessment Model in Gas Turbines and the Effect of Degraded Fuels on Engine Performance Simulations
POWER 2015; V001T05A008https://doi.org/10.1115/POWER2015-49657
Topics:
Biofouling
,
Engines
,
Fuels
,
Gas turbines
,
Simulation
,
Biodegradation
,
Biofuel
,
Contamination
,
Diesel
,
Exhaust systems
Add-On Performance Tests Based Upon PTC 46
POWER 2015; V001T05A009https://doi.org/10.1115/POWER2015-49856
Plant Operations and Maintenance
Technical/Technological Advances for Optimizing Heat Rate
POWER 2015; V001T06A001https://doi.org/10.1115/POWER2015-49012
Topics:
Heat
,
Cycles
,
Power stations
,
Coal
,
Computation
,
Feedwater
,
Flow measurement
,
Fuels
,
Heat sinks
,
Heating
Developing Green, Highly Efficient Coal-Fired Power Technologies
POWER 2015; V001T06A004https://doi.org/10.1115/POWER2015-49551
Topics:
Coal
,
Innovation
,
Optimization
,
Turbines
,
China
,
Design
,
Desulfurization
,
Emissions
,
Erosion
,
Flue gas desulfurization
The Importance of High Energy Piping Support Maintenance to Enhance System Useful Life
POWER 2015; V001T06A005https://doi.org/10.1115/POWER2015-49648
Topics:
Maintenance
,
Pipes
,
Service life (Equipment)
,
Stress
,
Design
,
Piping systems
,
Engineering standards
,
Failure
,
Coatings
,
Computer software
Plant Systems, Structures, Components and Materials
Reliability, Availability and Maintenance
Preventive Maintenance and Spare Parts Management Optimization in Natural Gas Pipelines Operating Under Variable Conditions Across the Year
POWER 2015; V001T08A001https://doi.org/10.1115/POWER2015-49326
Topics:
Maintenance
,
Natural gas distribution
,
Optimization
,
Pipelines
,
Generators
,
Gas turbines
,
Reliability
,
Cycles
,
Delays
,
Machinery
Impact of Plant Cycling on Availability
POWER 2015; V001T08A002https://doi.org/10.1115/POWER2015-49359
Topics:
Creep
,
Design
,
Fatigue
,
Maintenance
,
Materials degradation
,
Power stations
,
Public utilities
,
Stress
,
Wear
Maintenance Practices to Manage Corrosion Under Insulation (CUI) of Outdoor Piping Systems in Power Plants
POWER 2015; V001T08A003https://doi.org/10.1115/POWER2015-49606
Topics:
Corrosion
,
Insulation
,
Maintenance
,
Piping systems
,
Power stations
,
Pipes
,
Failure
,
Inspection
,
Damage
,
Probability
Simple and Combined Cycles
Impact of Startup Purge Credit on Combined Cycle Plant Operation
POWER 2015; V001T09A002https://doi.org/10.1115/POWER2015-49101
Topics:
Boilers
,
Combined cycle power stations
,
Explosives
,
Fatigue
,
Fatigue life
,
Firing
,
Flow (Dynamics)
,
Fuel systems
,
Fuels
,
Heat recovery steam generators
Gainesville Regional Utilities Kelly Plant Asset Management With Cycling Operation
POWER 2015; V001T09A003https://doi.org/10.1115/POWER2015-49148
Topics:
Public utilities
,
Coal
,
Combined cycles
,
Damage
,
Biofuel
,
Combustion
,
Cooling towers
,
Cycles
,
Electric power generation
,
Fuel storage
Analysis and Comparison Between Fixed and Variable Volume Ratio Expander for Micro-Scale ORC
POWER 2015; V001T09A004https://doi.org/10.1115/POWER2015-49271
Topics:
Microscale devices
,
Organic Rankine cycle
,
Fluids
,
Temperature
,
Waste heat
,
Architecture
,
Automotive industry
,
Cycles
,
Design
,
Dynamic models
Study on Washing Strategy Model of Gas Turbines
POWER 2015; V001T09A005https://doi.org/10.1115/POWER2015-49281
Topics:
Gas turbines
,
Compressors
,
Blades
,
Downtime
,
Flow (Dynamics)
,
Turbines
,
Clearances (Engineering)
,
Corrosion
,
Cycles
,
Dust
Aeroelastic Impact of a Circumferentially Varying Tip Gap
POWER 2015; V001T09A008https://doi.org/10.1115/POWER2015-49565
Topics:
Aeroelasticity
,
Compressors
,
Computational fluid dynamics
,
Cycles
,
Engines
,
Excitation
,
Flow (Dynamics)
,
Industrial gases
,
Leakage
,
Leakage flows
Impact of Blade Cooling on Gas Turbine Performance Under Different Operation Conditions and Design Aspects
POWER 2015; V001T09A009https://doi.org/10.1115/POWER2015-49723
Topics:
Blades
,
Cooling
,
Design
,
Gas turbines
,
Cycles
,
Energy generation
,
Air flow
,
Combustion
,
Compressed air
,
Computer software
Steam Generators
A Novel Boiler Design for High-Sodium Coal in Power Generation
POWER 2015; V001T10A001https://doi.org/10.1115/POWER2015-49167
Topics:
Boilers
,
Coal
,
Design
,
Energy generation
,
Sodium
,
Furnaces
,
Combustion
,
Heat transfer
,
Convection
,
Ignition
Optimization Design and Thermal Economy Analysis of the Flue Gas Treatment System in Power Plant
POWER 2015; V001T10A002https://doi.org/10.1115/POWER2015-49302
Topics:
Design
,
Economics
,
Flue gases
,
Optimization
,
Power stations
,
Temperature
,
Condensed matter
,
Heating
,
Pressure
,
Energy levels (Quantum mechanics)
Component Test Facility (ComTest) Phase 1 Engineering for 760C (1400F) Advanced Ultra-Supercritical (A-USC) Steam Generator Development
POWER 2015; V001T10A003https://doi.org/10.1115/POWER2015-49411
Topics:
Boilers
,
Test facilities
,
Construction
,
Steam
,
Engineering design
,
Maintenance
,
Manufacturing
,
Superheaters
,
Energy generation
,
Firing
Data Analysis for Tracking and Optimizing Boiler Performance
POWER 2015; V001T10A004https://doi.org/10.1115/POWER2015-49813
Topics:
Boilers
,
Data collection
,
ASME Standards
,
Engineers
,
Sensitivity analysis
,
Storage
,
Testing performance
Student Competition
Analysis of CO2 Capture From Power-Plant Flue Gas Using the Membrane Gas Absorption (MGA) Method
POWER 2015; V001T11A001https://doi.org/10.1115/POWER2015-49026
Topics:
Absorption
,
Carbon capture and storage
,
Flue gases
,
Membranes
,
Power stations
,
Carbon dioxide
,
Absorbents
,
Fibers
,
Modeling
,
Separation (Technology)
Thermogalvanic Waste Heat Recovery System in Automobiles
POWER 2015; V001T11A002https://doi.org/10.1115/POWER2015-49094
Topics:
Automobiles
,
Heat recovery
,
Climate
,
Electric current
,
Electrodes
,
Generators
,
Heat
,
Power density
,
Stress
,
Temperature
Analysis of a Solar Updraft Tower Utilizing Compost Waste Heat
POWER 2015; V001T11A003https://doi.org/10.1115/POWER2015-49114
Topics:
Solar energy
,
Waste heat
,
Temperature
,
Composting
,
Turbines
,
Modeling
,
Pressure
,
Roofs
,
Transparency
Transitional Effect on Turbulence Model for Wind Turbine Blade
POWER 2015; V001T11A006https://doi.org/10.1115/POWER2015-49223
Topics:
Blades
,
Turbulence
,
Wind turbines
,
Computational fluid dynamics
,
Computer software
,
Geometry
,
Rotors
,
Simulation
,
Thrust
,
Torque
Thermal Hydraulics and CFD
CFD Simulation and Experimental Data for a Fixed Heat Load Natural Draft Air-Cooled Heat Exchanger With Cold Inflow Mitigation
POWER 2015; V001T12A001https://doi.org/10.1115/POWER2015-49020
Topics:
Computational fluid dynamics
,
Heat
,
Heat exchangers
,
Inflow
,
Simulation
,
Stress
,
Temperature
,
Wire mesh
,
Air flow
,
Flow (Dynamics)
PIV Characterization of the Air Flow in a Scale Model of a Hydrogenerator
Emmanuel Bach, Laurent Mydlarski, Federico Torriano, Jean-Philippe Charest-Fournier, Hubert Sirois, Jean-François Morissette, Claude Hudon
POWER 2015; V001T12A003https://doi.org/10.1115/POWER2015-49124
Topics:
Air flow
,
Calibration
,
Computational fluid dynamics
,
Cooling
,
Flow (Dynamics)
,
Fluids
,
Generators
,
Heat
,
Hydroelectric power stations
,
Hydropower
Experimental Study on the Natural Circulation System for Single-Phase Water
POWER 2015; V001T12A004https://doi.org/10.1115/POWER2015-49230
Topics:
Water
,
Flow (Dynamics)
,
Heating
,
Pressure
,
Heat
,
Pool boiling
Flow Characteristics of High-Efficient Axial Flow Pump System
POWER 2015; V001T12A005https://doi.org/10.1115/POWER2015-49300
Topics:
Axial flow
,
Flow (Dynamics)
,
Pumps
,
Internal flow
,
Blades
,
Computational fluid dynamics
,
Engineering standards
,
Pipes
,
Suction
Application of CFD in Optimizing Rapid Filling of Natural Gas
POWER 2015; V001T12A006https://doi.org/10.1115/POWER2015-49368
Topics:
Computational fluid dynamics
,
Natural gas
,
Turbulence
,
Buoyancy
,
Compressibility
,
Compressible flow
,
Engineering simulation
,
Heat
,
Joules
,
Mass transfer
Numerical Investigation of a Three-Dimensional Laminar Mixed Convection Flows in Lid-Driven Cavity for Very Small Richardson Numbers
POWER 2015; V001T12A007https://doi.org/10.1115/POWER2015-49575
Topics:
Cavities
,
Flow (Dynamics)
,
Mixed convection
,
Temperature
,
Buoyancy
,
Computation
,
Diffusion (Physics)
,
Errors
,
Finite volume methods
,
Fluids
Turbines, Generators and Auxiliaries
Stator Cooling Water System Instrumentation
POWER 2015; V001T13A001https://doi.org/10.1115/POWER2015-49075
Topics:
Cooling
,
Instrumentation
,
Stators
,
Water
,
Copper
,
Generators
,
Corrective actions
,
Corrosion
,
Engineers
,
Failure
Numerical Prediction of a Multistage Centrifugal Pump Performance With Stationary and Moving Mesh
POWER 2015; V001T13A002https://doi.org/10.1115/POWER2015-49119
Topics:
Centrifugal pumps
,
Flow (Dynamics)
,
Engineering simulation
,
Simulation
,
Turbulence
,
Transients (Dynamics)
,
Approximation
,
Computer software
,
Design
,
Diffusers
Experimental Investigations of the Effect of Scheme Exit Height and Double Row Injection on the Film Cooling Performance of a Micro Tangential Jet Scheme: Part I — Pressure Side
POWER 2015; V001T13A003https://doi.org/10.1115/POWER2015-49131
Topics:
Film cooling
,
Pressure
,
Turbulence
,
Density
,
Gas turbines
,
Jets
,
Liquid crystals
,
Reynolds number
,
Suction
,
Transients (Dynamics)
Experimental Investigations of the Effect of Scheme Exit Height and Double Row Injection on the Film Cooling Performance of a Micro Tangential Jet Scheme: Part II — Suction Side
POWER 2015; V001T13A004https://doi.org/10.1115/POWER2015-49132
Topics:
Film cooling
,
Suction
,
Cooling
,
Density
,
Ducts
,
Gas turbines
,
Heat flux
,
Heat transfer coefficients
,
Liquid crystals
,
Mach number
Hydroelectric Generator-Motor Brake Dust Collection: Boundary Condition Selection for Flow Modeling of a Dilute-Phase Pneumatic Conveying System
POWER 2015; V001T13A006https://doi.org/10.1115/POWER2015-49344
Topics:
Boundary-value problems
,
Brakes
,
Dust
,
Engines
,
Flow (Dynamics)
,
Generators
,
Hydropower
,
Modeling
,
Motors
,
Design
Increase of Operational Safety of Tilting-Pad Journal Bearings by Extraction of Hot Oil at the Trailing Edge
POWER 2015; V001T13A007https://doi.org/10.1115/POWER2015-49352
Topics:
Journal bearings
,
Safety
,
Film thickness
,
Deformation
,
Load bearing capacity
,
Simulation
,
Bearings
,
Temperature
,
Thermomechanics
,
Boundary-value problems