Well sections that have been completed with an open annulus between the casing and the rock are occasionally found to be sealed by shale that creeps in and closes the annulus. This process usually happens spontaneously, without deliberate actions from the operator, in weak rocks with high shale content. The phenomenon has been studied in a series of laboratory tests. The tests reveal that annulus pressure may play a significant role in the formation of a shale barrier. The study also shows that formation of the barrier implies damage and permanent deformation of the rock in a limited region around the hole. In the field, a shale barrier is hidden behind the casing and is not directly accessible. They are usually detected by sonic logging tools and verified by pressure communication tests. Interpretation of sonic signals from behind the casing is however challenging, and identification of shale barriers in the field is not trivial.
Skip Nav Destination
ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering
June 17–22, 2018
Madrid, Spain
Conference Sponsors:
- Ocean, Offshore and Arctic Engineering Division
ISBN:
978-0-7918-5129-6
PROCEEDINGS PAPER
Shale As a Sealing Barrier Around Deep Wells
Erling Fjær,
Erling Fjær
SINTEF Industry, Trondheim, Norway
Search for other works by this author on:
Idar Larsen
Idar Larsen
SINTEF Industry, Trondheim, Norway
Search for other works by this author on:
Erling Fjær
SINTEF Industry, Trondheim, Norway
Idar Larsen
SINTEF Industry, Trondheim, Norway
Paper No:
OMAE2018-78749, V008T11A073; 5 pages
Published Online:
September 25, 2018
Citation
Fjær, E, & Larsen, I. "Shale As a Sealing Barrier Around Deep Wells." Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering. Volume 8: Polar and Arctic Sciences and Technology; Petroleum Technology. Madrid, Spain. June 17–22, 2018. V008T11A073. ASME. https://doi.org/10.1115/OMAE2018-78749
Download citation file:
43
Views
Related Proceedings Papers
Related Articles
Stability Analysis of Highly Deviated Boreholes to Minimize Drilling Risks and Nonproductive Time
J. Energy Resour. Technol (August,2019)
Modeling Time-Dependent Pore Pressure Due to Capillary and Chemical Potential Effects and Resulting Wellbore Stability in Shales
J. Energy Resour. Technol (September,2003)
The Mechanical Behavior of Anisotropic Sedimentary Rocks
J. Eng. Ind (February,1967)
Related Chapters
Introduction
Mechanics of Drillstrings and Marine Risers
Study on Damage Developing Model of the Coal Rock with Non-Residual Stress
Geological Engineering: Proceedings of the 1 st International Conference (ICGE 2007)
Meso-Experiment on the Softening and Cracking of Surrounding Rock from a Railway Tunnel under Water Damage Condition
Geological Engineering: Proceedings of the 1 st International Conference (ICGE 2007)