Life extension and asset integrity of Floating Production Unit (FPU) moorings are issues of increasing importance for operators due to changing production requirements, the requirement to extend service life, and circumstances where the met-ocean Basis of Design (BOD) has increased significantly over the life of the field. Reliability methods are gaining increasing acceptance as increased computing power allows large numbers of simulations to be undertaken using realistic fully coupled models that are validated against prior experiments. When applied to the re-qualification and life extension of FPU moorings, particularly with regard to re-qualification and life extension of in-place moorings, reliability analysis offers considerable advantages over conventional deterministic return period design. This paper details the application of a reliability approach to re-qualification and life extension of a turret-moored FPU that had design met-ocean conditions increased significantly over the life of the field. It explores key elements of reliability analysis including the probabilistic characterisation of met-ocean conditions, adequate representation of vessel dynamics and mooring loads in a Response Surface Model, and a selection of algorithms to solve for the system probability of failure. Discussion points include the advantages of the explicit identification of the most likely failure scenario versus uncertainty as to whether the worst design case has been identified, and the potential for rapid reassessment of reliability for specific design conditions (such as a degraded mooring system or a system for which degradation is ongoing). The results of this study demonstrate the significant advantages to the industry conferred by adopting reliability methods in the re-certification and life extension of existing FPU moorings. In particular, the study highlights that conventional mooring code deterministic design methods, whilst adequate for original design purposes, lack sufficient fidelity to address the multi-faceted issue of re-assessment of notionally marginal legacy systems. For a degraded existing mooring, an application of these methods can demonstrate that the level of reliability of the system is still acceptable, whereas a conventional approach may produce an over-conservative indication that the mooring is non-compliant. Applicable to a wide range of FPUs requiring re-qualification or life extension, the techniques discussed also provide pointers to more efficient and reliable mooring design for not just existing, but also for new FPUs.
Skip Nav Destination
ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering
June 19–24, 2016
Busan, South Korea
Conference Sponsors:
- Ocean, Offshore and Arctic Engineering Division
ISBN:
978-0-7918-4994-1
PROCEEDINGS PAPER
Application of Reliability Analysis to Re-Qualification and Life Extension of Floating Production Unit Moorings
D. Johnstone,
D. Johnstone
AMOG Consulting, Melbourne, Australia
Search for other works by this author on:
P. Sincock,
P. Sincock
AMOG Consulting, Melbourne, Australia
Search for other works by this author on:
A. E. Potts,
A. E. Potts
AMOG Consulting, Melbourne, Australia
Search for other works by this author on:
D. Hourigan
D. Hourigan
AMOG Consulting, Melbourne, Australia
Search for other works by this author on:
J. Rosen
AMOG Consulting, Melbourne, Australia
D. Johnstone
AMOG Consulting, Melbourne, Australia
P. Sincock
AMOG Consulting, Melbourne, Australia
A. E. Potts
AMOG Consulting, Melbourne, Australia
D. Hourigan
AMOG Consulting, Melbourne, Australia
Paper No:
OMAE2016-54677, V003T02A057; 10 pages
Published Online:
October 18, 2016
Citation
Rosen, J, Johnstone, D, Sincock, P, Potts, AE, & Hourigan, D. "Application of Reliability Analysis to Re-Qualification and Life Extension of Floating Production Unit Moorings." Proceedings of the ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering. Volume 3: Structures, Safety and Reliability. Busan, South Korea. June 19–24, 2016. V003T02A057. ASME. https://doi.org/10.1115/OMAE2016-54677
Download citation file:
16
Views
Related Proceedings Papers
Related Articles
An Indicator Response Surface Method for Simulation-Based Reliability Analysis
J. Mech. Des (July,2008)
Risk-Based Maintenance Planning for Deteriorating Pressure Vessels With Multiple Defects
J. Pressure Vessel Technol (August,2017)
System Reliability Analysis by Monte Carlo Based Method and Finite Element Structural Models
J. Offshore Mech. Arct. Eng (August,2014)
Related Chapters
PSA Level 2 — NPP Ringhals 2 (PSAM-0156)
Proceedings of the Eighth International Conference on Probabilistic Safety Assessment & Management (PSAM)
Life Extension of Mooring Chains - Including Effects of Mean Load and Corrosion Condition to Fatigue Capacity
Ageing and Life Extension of Offshore Facilities
Bolted Connections: Safe and Cost-Effective Failure-Probability and Service-Life Prediction and Risk Assessment (PSAM-0135)
Proceedings of the Eighth International Conference on Probabilistic Safety Assessment & Management (PSAM)