A Study on Gap Influence on Slamming Experiment Available to Purchase

This study presents an investigation of gap effect on slamming experiment. Two gaps were considered; a gap between transverse side of a model and tank wall and a gap between longitudinal end and end of a model. The deadrise angle was fixed 0°. The pressure was measured at the central location and compared. Three different drop heights were chosen to see the difference. A High speed camera was used to record the flow field. Therefore pressure at the center, and flow field around corner of the specimen were analyzed to investigate the gap effect in slamming experiment. The results showed that there was clear influence of the gap in slamming experiment.