Vortex induced vibrations (VIV) of long, slender marine structures may cause severe fatigue damage. However, VIV is still not fully understood, which calls for further research on this topic. This paper discusses results from experimental and numerical investigations of forces on rigid cylinders subjected to combined in-line (IL) and cross-flow (CF) motions, and it aims at improving the understanding of the interaction between IL and CF response components. Model tests with a long flexible beam were conducted at MARINTEK for the Norwegian Deepwater Programme (NDP). The model was 38 m long and it was towed horizontally so that both uniform and linear sheared current profiles could be obtained. Orbits for cross section motions at selected positions along the beam were identified in these tests. Forced motion experiments using these orbits were later carried out in the Marine Cybernetic Laboratory at Norwegian University of Science and Technology (NTNU). A 2 m long rigid cylinder was towed horizontally and forced to follow the measured orbits with identical amplitude ratio, non-dimensional frequency and Reynolds number as for the flexible beam tests. Parts of the results from these tests were published by Yin & Larsen in 2010. In this paper results from an investigation of trajectories for six positions along the beam in a uniform current condition will be shown. Three orbits have nearly the same CF amplitude ratio at the primary CF frequency, and the other three have similar IL amplitude ratio at the primary IL frequency, which is twice the CF frequency. Hydrodynamic coefficients have been found from experiments and numerical computations were carried out to find vortex shedding patterns for these cases. The main conclusions are that the IL motion component is a significant influence factor, and that higher order displacement components are more pronounced in IL direction than CF. Significant displacements in IL direction at 6 times the primary CF frequency were also observed, the ‘2T’ vortex pattern was captured when strong IL motion components were present. It is also seen that hydrodynamic coefficients should be found for combined CF and IL orbits and thereby improve the empirical models for prediction of VIV.
Skip Nav Destination
ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering
June 19–24, 2011
Rotterdam, The Netherlands
Conference Sponsors:
- Ocean, Offshore and Arctic Engineering Division
ISBN:
978-0-7918-4439-7
PROCEEDINGS PAPER
Experimental and Numerical Analysis of Forced Motion of a Circular Cylinder
Decao Yin,
Decao Yin
Norwegian University of Science and Technology, Trondheim, Norway
Search for other works by this author on:
Carl M. Larsen
Carl M. Larsen
Norwegian University of Science and Technology, Trondheim, Norway
Search for other works by this author on:
Decao Yin
Norwegian University of Science and Technology, Trondheim, Norway
Carl M. Larsen
Norwegian University of Science and Technology, Trondheim, Norway
Paper No:
OMAE2011-49438, pp. 327-336; 10 pages
Published Online:
October 31, 2011
Citation
Yin, D, & Larsen, CM. "Experimental and Numerical Analysis of Forced Motion of a Circular Cylinder." Proceedings of the ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering. Volume 7: CFD and VIV; Offshore Geotechnics. Rotterdam, The Netherlands. June 19–24, 2011. pp. 327-336. ASME. https://doi.org/10.1115/OMAE2011-49438
Download citation file:
16
Views
Related Proceedings Papers
Related Articles
Three-Dimensional Large Eddy Simulations and Proper Orthogonal Decomposition Analysis of Flow Around a Flexibly Supported Circular Cylinder
J. Offshore Mech. Arct. Eng (December,2022)
Flow Past a Rotating Cylinder at Low and High Rotation
Rates
J. Fluids Eng (April,2011)
Related Chapters
Vortex-Induced Vibration
Flow Induced Vibration of Power and Process Plant Components: A Practical Workbook
Global-Local Multisalce Modelling of Sandwich Structures by Using Arlequin Method
Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2010)
Cavitating Structures at Inception in Turbulent Shear Flow
Proceedings of the 10th International Symposium on Cavitation (CAV2018)