Offshore pipelines provide the main link between offshore oil and gas fields and hydrocarbon development onshore. Due to their economical installation, untrenched pipelines laid “on-bottom” are finding increased popularity over other types of offshore pipelines. However, the stability of untrenched pipeline design remains the subject of criticism. In many cases around the world, severe loading conditions, such as those during hurricanes, result in severe pipeline damage and disruption of oil and gas supply. In on-bottom pipeline stability analysis, hydrodynamic loads are applied to the pipe structure. The pipe passes these loads onto the supporting soil along its length. A variety of parameters need to be defined to model this loading scenario and to reflect the complicated interaction between the hydrodynamic load, pipe structure and the supporting soil. Moreover, there are uncertainties regarding the input values of these parameters, as any difference in these parameter values will result in a considerable difference in the final pipeline stability result (though the sensitivity to any differences is not well studied). In this study of the offshore pipeline stability, the hydrodynamic loads are estimated using Fourier analysis, which is currently the best practice in hydrodynamic modeling. The pipe-soil interaction is simulated with a force-resultant model, which is derived from a plasticity framework and is based on the results of centrifuge test calibration. The pipeline is modeled using an integrated numerical modeling tool developed by implementing the hydrodynamic load model and force-resultant model codes in the finite element package ABAQUS. Use of the integrated modeling tool allows for the coupling effect of the hydrodynamic-pipe-soil interaction to be accounted for, with the added ability to modify the applied hydrodynamic loads due to pipe movements during the analysis. The main aims of this paper are to demonstrate methods to estimate the probability of exceeding pipeline stability and quantify the importance of the on-bottom pipeline statistical analysis and the sensitivity of the parameters included in the pipeline stability design. After first describing the integrated model and providing an illustrative example of its use these aims are achieved by i) performing probabilistic analysis for a typical pipeline case and investigating the probability of exceeding pipeline stability under different maximum pipeline displacement values; and ii) developing a sensitivity analysis of the input parameters included in the on-bottom pipeline stability and ranking these parameters according to their sensitivity to the pipeline stability design.
Skip Nav Destination
ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering
June 19–24, 2011
Rotterdam, The Netherlands
Conference Sponsors:
- Ocean, Offshore and Arctic Engineering Division
ISBN:
978-0-7918-4436-6
PROCEEDINGS PAPER
Probabilistic Model Application in the Integrated Stability Analysis of Offshore On-Bottom Pipeline
Bassem S. Youssef,
Bassem S. Youssef
University of Western Australia, Perth, WA, Australia
Search for other works by this author on:
Mark J. Cassidy,
Mark J. Cassidy
University of Western Australia, Perth, WA, Australia
Search for other works by this author on:
Yinghui Tian
Yinghui Tian
University of Western Australia, Perth, WA, Australia
Search for other works by this author on:
Bassem S. Youssef
University of Western Australia, Perth, WA, Australia
Mark J. Cassidy
University of Western Australia, Perth, WA, Australia
Yinghui Tian
University of Western Australia, Perth, WA, Australia
Paper No:
OMAE2011-50047, pp. 817-828; 12 pages
Published Online:
October 31, 2011
Citation
Youssef, BS, Cassidy, MJ, & Tian, Y. "Probabilistic Model Application in the Integrated Stability Analysis of Offshore On-Bottom Pipeline." Proceedings of the ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering. Volume 4: Pipeline and Riser Technology. Rotterdam, The Netherlands. June 19–24, 2011. pp. 817-828. ASME. https://doi.org/10.1115/OMAE2011-50047
Download citation file:
15
Views
Related Proceedings Papers
Related Articles
Modeling the Deformation Response of High Strength Steel Pipelines—Part I: Material Characterization to Model the Plastic Anisotropy
J. Appl. Mech (September,2012)
Stability of Vertically Bent Pipelines Buried in Sand
J. Pressure Vessel Technol (August,2004)
Cover Requirement and Stability of Horizontally Bent Buried Pipelines
J. Pressure Vessel Technol (April,2012)
Related Chapters
Estimating Resilient Modulus Using Neural Network Models
Intelligent Engineering Systems Through Artificial Neural Networks, Volume 17
Summary of Water Hammer-Induced Pipe Failures
Fluid Mechanics, Water Hammer, Dynamic Stresses, and Piping Design
Flexibility Analysis
Process Piping: The Complete Guide to ASME B31.3, Fourth Edition