A Simple Estimation Method of the Stress Distribution Normal to Cross Section at Weld Toe in Non-Load Carrying Welded Joints

Many fatigue damages are occurred in the welded built-up structures designed by the hot spot stress methodology, especially near a boxing fillet weld toe. These fatigue cracks usually initiate from the toe and propagate to the plate thickness direction. Although fatigue life is affected by the stress gradient working over crack propagation path, the effect of stress gradient in cross section is not considered in the hot spot stress methodology. Then, many attempts based on fracture mechanics for the improvement of fatigue life estimation are proposed. Whereas stress distributions along the fatigue crack path must be given in order to apply the methods based on fracture mechanics for the precise fatigue life prediction, no stress distribution along the path considering the stress concentration caused by weld toe shape is obtained in practical structural design stages because the shell elements are used in finite element analyses in the design stages. A simple estimation method of the stress distribution normal to cross section at weld toe in non-load carrying welded joints is proposed in this paper. Calculation results of finite element analysis with shell elements and geometrical conditions (radius and flank angle of fillet weld toe and plate thickness) are used as input data for the estimation. The validity of this method is confirmed by comparing estimation results with ones by finite element analysis with solid elements.