In this paper the burst tests of seven tubular specimens are presented. In these tests the tubular specimens were loaded with internal pressure only. The specimens were cut from longitudinal welded tubes made of API 5L X80 steel with a nominal outside diameter of 457.2 mm (18 in) and a nominal wall thickness of 7.93 mm (0.312 in). The specimen IDTS 1 is a defect-free pipe. The specimen IDTS 2 contains only one defect, herein called base defect. The base defect is an external flat bottomed defect with uniform width (circumferential dimension). The other five specimens contain groups of interacting defects constituted by the combination of two or more base defects. All the defects were machined using spark erosion. Measurements were carried out in order to determine the actual dimensions of each tubular specimen and its respective groups of defects. Tensile specimens and impact test specimens were tested to determine material properties. The failure pressures measured in the laboratory tests are compared with those predicted by six assessments methods, namely: the ASME B31G method, the RSTRENG 085dL method, the DNV RP-F101 method for single defects, the RPA method, the RSTRENG Effective Area method and the DNV RP-F101 method for interacting defects.

This content is only available via PDF.
You do not currently have access to this content.