Skip Nav Destination
Proceedings Papers
Volume 5A: Pipelines, Risers, and Subsea Systems
Pipelines, Risers, and Subsea Systems
Flexible Pipes and Umbilicals
The Study of a New Concept of Flexible Pipe With Carbon Fiber/Epoxy Reinforced Inner Sheath
OMAE 2017; V05AT04A001https://doi.org/10.1115/OMAE2017-61069
Topics:
Carbon fibers
,
Epoxy adhesives
,
Epoxy resins
,
Pipes
,
Pressure
,
Armor
,
Composite materials
,
Finite element analysis
,
Manufacturing
,
Steel
Effect of Installation on Collapse Performance of Flexible Pipes
OMAE 2017; V05AT04A002https://doi.org/10.1115/OMAE2017-61100
Topics:
Collapse
,
Pipes
,
Design
,
Finite element analysis
,
Plasticity
,
External pressure
,
Failure mechanisms
,
Geometry
,
Hydrostatics
,
Manufacturing
Stresses in Tensile Armour Layers of Unbounded Flexible Risers Loaded With External Pressure: Application to Lateral Buckling Mode
Fabien Caleyron, Jean-Marc Leroy, Martin Guiton, Pascal Duchêne, Pascal Estrier, Kristof Vraniskoski, Alexandre Damiens
OMAE 2017; V05AT04A006https://doi.org/10.1115/OMAE2017-61133
Topics:
Armor
,
Buckling
,
External pressure
,
Flexible risers
,
Stress
,
Pipes
,
Wire
,
Design
,
Engineering models
,
Kinematics
Pipeline Regulations in the Norwegian Petroleum Industry: Experiences, Follow-Up and Statistical Summaries of Incidents
OMAE 2017; V05AT04A009https://doi.org/10.1115/OMAE2017-61234
Topics:
Petroleum industry
,
Pipelines
,
Regulations
,
Pipeline risers
,
Risers (Casting)
,
Risk
,
Safety
,
Leakage
,
Flexible risers
,
Petroleum
Flow Induced Pulsations (FLIP) in Rough Bore Gas Flexible Pipes, Tests and Model
OMAE 2017; V05AT04A012https://doi.org/10.1115/OMAE2017-61324
Topics:
Flow (Dynamics)
,
Pipes
,
Surface roughness
,
Pipeline risers
,
Risers (Casting)
,
Acoustics
,
Fatigue failure
,
Noise (Sound)
,
Performance
,
Pressure
Loading Combination Screening Using Probabilistic Determination of Load-Case Matrices
OMAE 2017; V05AT04A013https://doi.org/10.1115/OMAE2017-61384
Topics:
Stress
,
Design
,
Flexible risers
,
Pipeline risers
,
Risers (Casting)
,
Finite element analysis
,
Probability
,
Dynamic analysis
,
Engineering standards
,
Buoyancy
Reliability Optimization Design of the Steel Tube Umbilical Cross Section Based on Particle Swarm Algorithm
OMAE 2017; V05AT04A014https://doi.org/10.1115/OMAE2017-61388
Topics:
Algorithms
,
Design
,
Optimization
,
Particulate matter
,
Reliability
,
Steel
,
Control equipment
,
Failure
,
Manufacturing systems
,
Monte Carlo methods
On the Design Considerations of New Offloading Hose Applied on a Turret Moored FPSO
OMAE 2017; V05AT04A015https://doi.org/10.1115/OMAE2017-61410
Topics:
Design
,
FPSO
,
Mooring
,
Tankers
,
Computer simulation
,
Computer software
,
Crude oil
,
Emergencies
,
Fatigue damage
,
Maintainability
Effect of Weld Geometry on the Fatigue Behaviour of Umbilical Super Duplex Stainless Steel Tubes
OMAE 2017; V05AT04A016https://doi.org/10.1115/OMAE2017-61411
Topics:
Fatigue
,
Geometry
,
Stainless steel
,
Fatigue testing
,
Cycles
,
Fatigue strength
,
Stress concentration
,
Databases
,
Failure analysis
,
Fatigue failure
Evolution of Residual Stress in Tensile Armour Wires of Flexible Pipes During Pipe Manufacture
Upul S. Fernando, Michelle Davidson, Kun Yan, Matthew J. Roy, Thilo Pirling, Philip J. Withers, John A. Francis
OMAE 2017; V05AT04A017https://doi.org/10.1115/OMAE2017-61490
Topics:
Armor
,
Pipes
,
Stress
,
Wire
,
Manufacturing
,
Deformation
,
Finite element model
,
Shapes
,
Boundary-value problems
,
Design
Fatigue Analyses of a Flexible Riser Considering End Fitting Effects
José Renato M. de Sousa, George C. Campello, Fernando Jorge M. de Sousa, Alyson G. Vaillant, Gilberto B. Ellwanger
OMAE 2017; V05AT04A019https://doi.org/10.1115/OMAE2017-61792
Topics:
Fatigue analysis
,
Fittings
,
Flexible risers
,
Wire
,
Armor
,
Stress
,
Fatigue
,
Deformation
,
Epoxy resins
,
Fatigue failure
Parallelized Element-by-Element Architecture for Structural Analysis of Flexible Pipes Using Macro Finite Elements
OMAE 2017; V05AT04A020https://doi.org/10.1115/OMAE2017-61800
Topics:
Finite element analysis
,
Pipes
,
Structural analysis
,
Degrees of freedom
,
Design
,
Stress
,
Computer software
,
Modeling
,
Natural gas
,
Parallel processing
An Experimental and Numerical Investigation of the Effect of Axial Thermal Gradients in Flexible Pipes
Dag Fergestad, Frank Klæbo, Jan Muren, Pål Hylland, Tom Are Grøv, Hans Lange, Janne K. Ø. Gjøsteen, Andreas Gjendal, Bjørn Melve, Claus Egebjerg Kristensen
OMAE 2017; V05AT04A021https://doi.org/10.1115/OMAE2017-61804
Topics:
Pipes
,
Temperature gradient
,
Testing
,
Finite element analysis
,
Temperature
,
Couplings
,
Cycles
,
Deflection
,
Dimensions
,
Dynamics (Mechanics)
Consistent Free Span VIV Fatigue Analysis of Flexibles
OMAE 2017; V05AT04A022https://doi.org/10.1115/OMAE2017-61812
Topics:
Fatigue analysis
,
Vortex-induced vibration
,
Stick-slip
,
Fatigue life
,
Damping
,
Arches
,
Fatigue
,
Mechanical properties
,
Ocean engineering
,
Cables
Dynamic Behavior of Flexible vs Rigid Spools During Seismic Loading Events
OMAE 2017; V05AT04A023https://doi.org/10.1115/OMAE2017-61837
Topics:
Damage
,
Design
,
Dynamic response
,
Dynamic testing (Materials)
,
Earthquakes
,
Finite element analysis
,
Flanges
,
Geometry
,
Leakage
,
Manifolds
Improved Dynamic Structural Modelling for Subsea Power Cables With Bitumen Coated Armour Wires
OMAE 2017; V05AT04A024https://doi.org/10.1115/OMAE2017-61848
Topics:
Armor
,
Asphalt
,
Bituminous materials
,
Cables
,
Modeling
,
Ocean engineering
,
Pitch (Bituminous material)
,
Wire
,
Stiffness
,
Stress
The Effect on Dynamic Steel Tube Umbilical Fatigue Performance Associated With Designing for Elevated Temperature
OMAE 2017; V05AT04A027https://doi.org/10.1115/OMAE2017-61895
Topics:
Design
,
Fatigue
,
Steel
,
Temperature
,
Friction
,
Stress
,
High temperature
,
Pipeline risers
,
Risers (Casting)
,
Testing
Verification Scheme for Unbonded Flexible Pipes: Definition, Implementation and Reflection of API 17J
OMAE 2017; V05AT04A028https://doi.org/10.1115/OMAE2017-61916
Topics:
American Petroleum Institute
,
Pipes
,
Reflection
,
Design
,
Manufacturing
,
Testing
,
Design methodology
,
Pipe and tube industry
,
Reliability
,
Safety
Theoretical Framework for Axial Thermal Gradients and Interface Slip in Pressure Sheath Layers of Flexible Pipes
OMAE 2017; V05AT04A029https://doi.org/10.1115/OMAE2017-61923
Topics:
Pipes
,
Pressure
,
Temperature gradient
,
Armor
,
Shear stress
,
Stress
,
Cooling
,
Design
,
Displacement
,
Failure mechanisms
Proposed Methodology for Fatigue Testing on Umbilical Round Armor Wires
Mariana R. Tagliari, Tiago B. Coser, George Campello, Gustavo Matoso, João Carlos B. Bertoncello, Facundo Argüello, Afonso Reguly
OMAE 2017; V05AT04A030https://doi.org/10.1115/OMAE2017-62020
Topics:
Armor
,
Fatigue testing
,
Wire
,
Design
,
Ocean engineering
,
Cables
,
Corrosion
,
Damage
,
Dynamic testing (Materials)
,
Fatigue
Full-Scale Validation of Axial Carcass Loads in Flexible Pipe Structure From Cyclic Pressure and Temperature
Claus E. Kristensen, Jan Muren, Andreas Gjendal, Erik B. Hanssen, Bjørn Melve, Nils Sødahl, Bjørn Engh, Mario Søfferud
OMAE 2017; V05AT04A031https://doi.org/10.1115/OMAE2017-62042
Topics:
Pipes
,
Pressure
,
Stress
,
Temperature
,
Testing
,
Fittings
,
Flexible risers
,
Finite element analysis
,
Instrumentation
,
Risk assessment
An Experimental Assessment of the Hysteresis Behavior of Umbilical Cables Under Cyclic Traction
Caio C. P. Santos, Celso P. Pesce, Rafael Salles, Guilherme R. Franzini, Rodolfo T. Gonçalves, Rafael Morini
OMAE 2017; V05AT04A032https://doi.org/10.1115/OMAE2017-62081
Topics:
Cables
,
Traction
,
Stress
,
Energy dissipation
,
Damping
,
Dry friction
,
Flexible structures
,
Instrumentation
,
Internal friction
,
Testing
Finite Element Analysis of Umbilical Cables Anchoring Systems
Eduardo Ribeiro Malta, Fernando Geremias Toni, Heloísa Guedes Mendonça, Clóvis de Arruda Martins, Rafael Giovane Morini, Rafael Loureiro Tanaka
OMAE 2017; V05AT04A033https://doi.org/10.1115/OMAE2017-62128
Topics:
Cables
,
Finite element analysis
,
Armor
,
Resins
,
Stress
,
Adhesion
,
Adhesives
,
Epoxy resins
,
Finite element model
,
Shear stress
Lazy-Wave Buoyancy Length Reduction Based on Fatigue Reliability Analysis
OMAE 2017; V05AT04A035https://doi.org/10.1115/OMAE2017-62316
Topics:
Buoyancy
,
Event history analysis
,
Fatigue
,
Waves
,
Safety
,
Flexible risers
,
Ocean engineering
,
Reliability
,
Risk
,
Water
End Fitting Effect on Stress Evaluation of Tensile Armors in Unbonded Flexible Pipes Under Axial Tension
OMAE 2017; V05AT04A036https://doi.org/10.1115/OMAE2017-62378
Topics:
Fittings
,
Pipes
,
Stress
,
Tension
,
Friction
,
Wire
,
Bending (Stress)
,
Displacement
,
Finite element analysis
,
Armor
Time Dependent Carcass-Liner Interface Load Model
OMAE 2017; V05AT04A037https://doi.org/10.1115/OMAE2017-62439
Topics:
Stress
,
Failure mechanisms
,
Flexible risers
,
Pipeline risers
,
Polymers
,
Risers (Casting)
,
Shrinkage (Materials)
Bending Mechanics of Cable Cores and Fillers in a Dynamic Submarine Cable
OMAE 2017; V05AT04A038https://doi.org/10.1115/OMAE2017-62553
Topics:
Cables
,
Fillers (Materials)
,
Underwater vehicles
,
Stress
,
Fatigue life
,
Mechanical behavior
,
Stick-slip
,
Tension
,
Armor
,
Electricity (Physics)
Consistent VIV Assessment Methodology for Unbonded Flexible Risers
OMAE 2017; V05AT04A039https://doi.org/10.1115/OMAE2017-62554
Topics:
Flexible risers
,
Vortex-induced vibration
,
Pipeline risers
,
Risers (Casting)
,
Stiffness
,
Damping
,
Fatigue damage
,
Stress
,
Damage
,
Energy dissipation
Experimental Investigation of Power Umbilical Damping
OMAE 2017; V05AT04A040https://doi.org/10.1115/OMAE2017-62584
Topics:
Damping
,
Temperature
,
Vortex-induced vibration
,
Seawater
,
Steady state
,
Cables
,
Construction
,
Fatigue damage
,
Ocean currents
,
Oscillations
Flow Assurance
The Feasibility of OpenFOAM-Based One-Dimensional Prediction of Slugging Induced Pressure Fluctuations in Pipeline-Riser Systems
OMAE 2017; V05AT04A045https://doi.org/10.1115/OMAE2017-61316
Topics:
Fluctuations (Physics)
,
Pipeline risers
,
Pressure
,
Slug flows
,
Multiphase flow
,
Transients (Dynamics)
,
Data collection
,
Dynamics (Mechanics)
,
Fluids
,
Momentum
Two Phase Annular Flow Approximation Using 1-D Flow Equations Coupled With a Drift Flux Model for Concurrent Flow in Vertical or Near Vertical Channels
OMAE 2017; V05AT04A048https://doi.org/10.1115/OMAE2017-61480
Topics:
Approximation
,
Flow (Dynamics)
,
Pipes
,
Porosity
,
Liquid films
,
Pressure gradient
,
Computer software
,
Momentum
Innovative Technologies for Deepwater Low-Cost Production
Developments in Testing and Manufacture of Thick-Walled Pipe
OMAE 2017; V05AT04A049https://doi.org/10.1115/OMAE2017-61083
Topics:
Pipes
,
Testing
,
Design
,
Water
,
Pipelines
,
Collapse
,
Pressure
,
Pipe joints
,
Safety
,
External pressure
Design Challenges of the Next Generation of All Electric Umbilical Systems
OMAE 2017; V05AT04A050https://doi.org/10.1115/OMAE2017-61879
Topics:
Design
,
Ocean engineering
,
Architecture
,
Electricity (Physics)
,
Fatigue
,
Fluids
,
Hydraulic control
,
Materials science
,
Pressure
,
Reliability
Development of the Next Generation Thermoplastic Hose Umbilical
OMAE 2017; V05AT04A051https://doi.org/10.1115/OMAE2017-61881
Topics:
Collapse
,
Composite materials
,
Control systems
,
Corrosion resistance
,
Cutting
,
Design
,
Fatigue
,
Gulf of Mexico
,
High pressure (Physics)
,
High temperature
On the Feasibility of Using Underwater Acoustic Data Transmission for Subsea Equipment Monitoring
OMAE 2017; V05AT04A052https://doi.org/10.1115/OMAE2017-62103
Topics:
Acoustics
,
Ocean engineering
,
Signals
,
Engineering simulation
,
Ray tracing
,
Shorelines
,
Signal to noise ratio
,
Simulation
,
Temperature
,
Underwater vehicles
Subsea Production Layout: Design and Cost
OMAE 2017; V05AT04A053https://doi.org/10.1115/OMAE2017-62488
Topics:
Design
,
Ocean engineering
,
Manifolds
,
Water
,
Computer software
,
Drilling
,
Flow (Dynamics)
,
FPSO
,
Pipelines
Email alerts
Most Read Proceedings Papers in OMAE
OMAE2024 Front Matter
OMAE2024