Skip Nav Destination
Proceedings Papers
In This Volume
Volume 6A: Pipeline and Riser Technology
Pipeline and Riser Technology
Investigation of Tensile Armor Wire Breaks in Flexible Risers and a Method for Detection
OMAE 2014; V06AT04A002https://doi.org/10.1115/OMAE2014-23103
Topics:
Armor
,
Flexible risers
,
Wire
,
Pipes
,
Fibers
,
Pipeline risers
,
Risers (Casting)
,
Strain measurement
,
Strain sensors
,
Tension
Saturation Index Prediction Based on Taguchi Approach and Multiple Linear Regression in Oil Wells
Vivianne Cristina Ferreira Lima, Marco Antonio Ribeiro de Almeida, Florence Leal Machado, Valter Antonio Monteiro Branco
OMAE 2014; V06AT04A003https://doi.org/10.1115/OMAE2014-23106
Topics:
Oil wells
,
Pressure
,
Flow (Dynamics)
,
Water
,
Computer software
,
Displacement
,
Equilibrium (Physics)
,
Fluids
,
Groundwater
,
Precipitation
Trenching Considerations for Arctic Pipelines
OMAE 2014; V06AT04A005https://doi.org/10.1115/OMAE2014-23116
Topics:
Arctic region
,
Pipelines
,
Seabed
,
Ice
,
Water
,
Buckling
,
Cold climates
,
Damage
,
Risk
,
Soil
Arctic Offshore Pipeline Design and Installation Challenges
OMAE 2014; V06AT04A006https://doi.org/10.1115/OMAE2014-23117
Topics:
Arctic region
,
Design
,
Underwater pipelines
,
Pipelines
,
Ice
,
Ocean engineering
,
Piping design
,
Stress
,
Water
,
Buckling
Fatigue Analysis of Subsea Jumpers due to Slug Flow
OMAE 2014; V06AT04A008https://doi.org/10.1115/OMAE2014-23146
Topics:
Fatigue analysis
,
Ocean engineering
,
Slug flows
,
Design
,
Fatigue
,
Vibration
,
Flow (Dynamics)
,
Stress
,
Excitation
,
Fatigue damage
Flexible Riser Bending Hysteresis Influence on Bend Stiffener Response
OMAE 2014; V06AT04A009https://doi.org/10.1115/OMAE2014-23151
Topics:
Flexible risers
,
Dynamic analysis
,
Finite element analysis
,
Friction
,
Hardening
,
Pipeline risers
,
Pressure
,
Risers (Casting)
,
Stiffness
,
Waves
Finite Element Analysis of Flexible Pipes Under Compression
OMAE 2014; V06AT04A010https://doi.org/10.1115/OMAE2014-23192
Topics:
Compression
,
Finite element analysis
,
Pipes
,
Armor
,
Stress
,
Finite element model
,
Friction
,
Plasticity
,
Pressure
,
Service life (Equipment)
A Study for Statistical Characteristics of Riser Response in Global Dynamic Analysis With Irregular Wave
OMAE 2014; V06AT04A011https://doi.org/10.1115/OMAE2014-23196
Topics:
Dynamic analysis
,
Pipeline risers
,
Risers (Casting)
,
Waves
,
Simulation
,
Excitation
,
Water
,
Wave packets
,
Computer simulation
,
Computer software
Heat and Mass Transfer Mechanism of Gas Hydrate Development for South China Sea
OMAE 2014; V06AT04A013https://doi.org/10.1115/OMAE2014-23202
Topics:
China
,
Heat
,
Mass transfer
,
Methane hydrate
,
Seas
,
Sediments
,
Fractals
,
Computer simulation
,
Computer software
,
Drainage
Hydrodynamic Coefficients for Straked Risers
OMAE 2014; V06AT04A014https://doi.org/10.1115/OMAE2014-23222
Topics:
Pipeline risers
,
Risers (Casting)
,
Drag (Fluid dynamics)
,
Vortex-induced vibration
,
Flow (Dynamics)
,
Steel
,
Water
,
Calibration
,
Currents
,
Flexible risers
A Multi-Purpose Finite Element Model for Flexible Risers Studies
Fabien Caleyron, Martin Guiton, Jean-Marc Leroy, Timothee Perdrizet, David Charliac, Pascal Estrier, Laurent Paumier
OMAE 2014; V06AT04A015https://doi.org/10.1115/OMAE2014-23250
Topics:
Finite element model
,
Flexible risers
,
Buckling
,
Collapse
,
Computer software
,
External pressure
,
Finite element analysis
,
Pipes
,
Pressure
,
Risk
Fatigue Assessment of Work-Over Risers Through Physical Testing
OMAE 2014; V06AT04A016https://doi.org/10.1115/OMAE2014-23266
Topics:
Fatigue
,
Pipeline risers
,
Risers (Casting)
,
Testing
,
String
,
Stiffness
,
Stress
,
Finite element analysis
,
Springs
,
Couplings
Comparative Study on the Collapse Response of Flexible Pipe Using Finite Element Methods
OMAE 2014; V06AT04A018https://doi.org/10.1115/OMAE2014-23306
Topics:
Collapse
,
Finite element methods
,
Pipes
,
Deepwater development
,
Armor
,
Bifurcation
,
Bricks
,
Composite materials
,
Computer simulation
,
Computer software
Lateral Buckling and Walking Design of a Pipeline Subjected to a High Number of Operational Cycles on Very Uneven Seabed
Rafael F. Solano, Bruno R. Antunes, Alexandre S. Hansen, T. Sriskandarajah, Carlos R. Charnaux, P. Ragupathy, Daniel Manso
OMAE 2014; V06AT04A020https://doi.org/10.1115/OMAE2014-23331
Topics:
Buckling
,
Cycles
,
Design
,
Pipelines
,
Seabed
,
Thermomechanics
,
High pressure (Physics)
,
High temperature
,
Soil
,
Displacement
Design Challenge of Rigid Riser-Spool Piece Against HTHP Induced Expansion in Pipe-in-Pipe Systems
OMAE 2014; V06AT04A021https://doi.org/10.1115/OMAE2014-23351
Topics:
Design
,
Pipeline risers
,
Pipes
,
Risers (Casting)
,
Seas
,
China
,
High pressure (Physics)
,
High temperature
,
Ocean engineering
,
Clamps (Tools)
Response of Mild Steel Pipes Under High Mass Low Velocity Impacts
OMAE 2014; V06AT04A022https://doi.org/10.1115/OMAE2014-23366
Topics:
Pipes
,
Steel
,
Damage
,
Finite element analysis
,
Impact testing
,
Pipelines
,
Computer software
,
Deformation
,
Gears
,
Modeling
On the Challenges With Pipeline Free Spans in Operational Phase
OMAE 2014; V06AT04A024https://doi.org/10.1115/OMAE2014-23403
Topics:
Arches
,
Pipelines
,
Design
,
Failure
,
Piping design
,
Soil
,
Vortex-induced vibration
,
Cycles
,
Fatigue
,
Fatigue damage
On the Effects of Bending Stiffness for Flexible Riser Model Tests
OMAE 2014; V06AT04A025https://doi.org/10.1115/OMAE2014-23423
Topics:
Flexible risers
,
Stiffness
,
Modeling
,
Pipeline risers
,
Risers (Casting)
,
Testing
,
Waves
,
Computer software
,
Construction
,
Dynamic analysis
Preliminary Study on Stick-Slip in Drillstring With Analytical Model Expressed With Neutral Delay Differential Equation
OMAE 2014; V06AT04A026https://doi.org/10.1115/OMAE2014-23424
Topics:
Delay differential equations
,
Drill strings
,
Stick-slip
,
Drilling
,
Bits (Tools)
,
Damage
,
Drillships
,
Friction
,
Grinding
,
Numerical analysis
Acoustic Reflectometry for Blockage Detection in Pipeline
OMAE 2014; V06AT04A027https://doi.org/10.1115/OMAE2014-23488
Topics:
Acoustics
,
Pipelines
,
Pipes
,
Microphones
,
Signals
,
Computer software
,
Data acquisition systems
,
Design
,
Engineering prototypes
,
Excitation
Study of Slug Control Techniques in Pipeline Systems
OMAE 2014; V06AT04A028https://doi.org/10.1115/OMAE2014-23493
Topics:
Pipeline systems
,
Slug flows
,
Flow (Dynamics)
,
Pipeline risers
,
Control systems
,
Pressure
,
Valves
,
Water
,
Computer software
,
Feedback
Hydrodynamic Forces due to Oblique Wave and Current Loading on Untrenched Subsea Pipelines
OMAE 2014; V06AT04A029https://doi.org/10.1115/OMAE2014-23500
Topics:
Fluid-dynamic forces
,
Underwater pipelines
,
Waves
,
Pipelines
,
Pipes
,
Computational fluid dynamics
,
Flow (Dynamics)
,
Stability
,
Design
,
Fluid dynamics
Sandwich Pipes With Strain Hardening Cementitious Composites (SHCC): Numerical Analyses
Guangming Fu, Claudio Moura Paz, John Alex Hernández Chujutalli, Marcelo Igor Lourenço, Dirney Bessa de Lima, Jr., Yong Li, Romildo Toledo Filho, Segen F. Estefen
OMAE 2014; V06AT04A030https://doi.org/10.1115/OMAE2014-23507
Topics:
Composite materials
,
Numerical analysis
,
Pipes
,
Work hardening
,
Collapse
,
Thermal insulation
,
Buckling
,
Cable reels
,
Constitutive equations
,
External pressure
Numerical and Experimental Study of Damaged Sandwich Pipe Under External Pressure
OMAE 2014; V06AT04A031https://doi.org/10.1115/OMAE2014-23512
Topics:
External pressure
,
Pipes
,
Pressure
,
Damage
,
Collapse
,
Finite element model
,
High strength steel
,
Pipelines
,
Seabed
,
Steel
Revisiting the Dimensional Analysis of Pipeline Embedment During Installation
OMAE 2014; V06AT04A032https://doi.org/10.1115/OMAE2014-23520
Topics:
Dimensional analysis
,
Pipelines
,
Design
,
Pipes
,
Soil
,
Calibration
,
Errors
,
Seabed
,
Stability
,
Stiffness
Rate Dependent Soil Resistance in FE Analysis of Pipeline Walking
OMAE 2014; V06AT04A033https://doi.org/10.1115/OMAE2014-23521
Topics:
Earth resistance
,
Finite element analysis
,
Pipelines
,
Soil
,
Friction
,
Heat
,
Pipes
,
Compression
,
Drainage
,
Hardening
Load Response and Finite Element Modelling of Bonded Loading Hoses
OMAE 2014; V06AT04A034https://doi.org/10.1115/OMAE2014-23545
Topics:
Finite element analysis
,
Modeling
,
Stress
,
Testing
,
Steel
,
Fatigue life
,
Tension
,
American Petroleum Institute
,
Composite materials
,
Deformation
Flexible Pipe Modeling Using Finite Macro-Elements
OMAE 2014; V06AT04A035https://doi.org/10.1115/OMAE2014-23551
Topics:
Modeling
,
Pipes
,
Computer software
,
Algebra
,
Computer simulation
,
Displacement
,
Fracture toughness
Coupled Analysis of SCR and Flowline Under High Pressure and High Temperature
OMAE 2014; V06AT04A036https://doi.org/10.1115/OMAE2014-23567
Topics:
High pressure (Physics)
,
High temperature
,
Pipes
,
Design
,
Dynamic response
,
Finite element analysis
,
Gulf of Mexico
,
Pipeline risers
,
Risers (Casting)
,
Seabed
Assessment of the Integrity of the PVDF Barrier in Unbonded Flexible Pipes
OMAE 2014; V06AT04A037https://doi.org/10.1115/OMAE2014-23573
Topics:
Pipes
,
Design
,
Polymers
,
American Petroleum Institute
,
Cracking (Materials)
,
Failure
,
Fracture (Process)
,
High pressure (Physics)
,
High temperature
,
Leakage
Wrinkling and Collapse of Girth-Welded Lined Pipe Under Bending
OMAE 2014; V06AT04A039https://doi.org/10.1115/OMAE2014-23577
Topics:
Collapse
,
Pipes
,
Carbon steel
,
Composite materials
,
Corrosion resistant materials
,
Diamonds
,
Linings (Textiles)
,
Modeling
,
Pipelines
,
Welded joints
In Situ Investigation of Microstructural Changes in Thermoplastic Composite Pipe Under Compressive Load
OMAE 2014; V06AT04A040https://doi.org/10.1115/OMAE2014-23579
Topics:
Pipes
,
Stress
,
Thermoplastic composites
,
Composite materials
,
Failure
,
Design
,
Failure mechanisms
,
Pipeline risers
,
Risers (Casting)
,
Analytical methods
Integrity Assessment of Clad Pipe Girth Welds
OMAE 2014; V06AT04A041https://doi.org/10.1115/OMAE2014-23625
Topics:
Pipes
,
Welded joints
,
Design
,
Flow (Dynamics)
,
Engineering standards
,
Geometry
,
Pressure
,
Process simulation
,
Residual stresses
Crack Initiation and Growth in Bimetallic Girth Welds
OMAE 2014; V06AT04A042https://doi.org/10.1115/OMAE2014-23628
Topics:
Fracture (Materials)
,
Welded joints
,
Ductile fracture
,
Damage
,
Calibration
,
Damage mechanics
,
Deformation
,
Design
,
Displacement
,
Fracture mechanics
Design of Novel Solution of Flexible Pipe for Offshore Oil Offloading Transfer
OMAE 2014; V06AT04A043https://doi.org/10.1115/OMAE2014-23640
Topics:
Design
,
Ocean engineering
,
Pipes
,
Armor
,
Buoyancy
,
Composite materials
,
FPSO
,
Carbon fibers
,
Engineering prototypes
,
Steel
Numerical Simulation of Solid Particle Erosion in a 90 Degree Bend for Gas Flow
OMAE 2014; V06AT04A044https://doi.org/10.1115/OMAE2014-23656
Topics:
Computer simulation
,
Erosion
,
Gas flow
,
Particulate matter
,
Flow (Dynamics)
,
Turbulence
,
Modeling
,
Pipe flow
,
Piping systems
,
Pressure
Upheaval Creep of Rock Dumped Flexible Flowline
OMAE 2014; V06AT04A046https://doi.org/10.1115/OMAE2014-23673
Topics:
Creep
,
Rocks
,
Buckling
,
Temperature
,
Finite element analysis
,
Pressure
,
Computer software
,
Cycles
,
Pipes
,
Stiffness
Predicting Hydrostatic Collapse of Pipes Using Finite Element Analysis
OMAE 2014; V06AT04A048https://doi.org/10.1115/OMAE2014-23690
Topics:
Collapse
,
Finite element analysis
,
Hydrostatics
,
Pipes
,
Design
,
Residual stresses
,
Wall thickness
,
Materials properties
,
Optimization
,
Pipelines
Effect of Reeling Simulation on the Mechanical Properties of New Duplex Stainless Steel for Line Pipe
Hidenori Shitamoto, Masayuki Sagara, Hisashi Amaya, Nobuyuki Hisamune, Daisuke Motoya, Yuuki Watatani
OMAE 2014; V06AT04A049https://doi.org/10.1115/OMAE2014-23694
Topics:
Mechanical properties
,
Pipes
,
Simulation
,
Stainless steel
,
Cable reels
,
Cracking (Materials)
,
Deformation
,
Fracture (Process)
,
Alloys
,
Carbon dioxide
Experimental Comparison of Tensile Armor Wires Using Strain Gages and Fiber Bragg Grating Techniques
Felipe Arêas Vargas, Diogo Garcia Lopes, Paulo Pedro Kenedi, Judimar Clevelario, Fabio de Souza Pires
OMAE 2014; V06AT04A050https://doi.org/10.1115/OMAE2014-23706
Topics:
Armor
,
Fiber Bragg gratings
,
Strain gages
,
Wire
,
Pipes
,
Fatigue life
,
Fittings
,
Collapse
,
Compression
,
Flexible risers
Assessment of Parameters Influencing Lateral Buckling of Deep Subsea Pipe-in-Pipe Pipeline System Using Finite Element Modeling
OMAE 2014; V06AT04A051https://doi.org/10.1115/OMAE2014-23731
Topics:
Buckling
,
Finite element analysis
,
Modeling
,
Ocean engineering
,
Pipeline systems
,
Pipes
,
Pipelines
,
Soil
,
Boundary-value problems
,
Design
Experimental Verification of HFMI Treatment of Large Structures
OMAE 2014; V06AT04A052https://doi.org/10.1115/OMAE2014-23764
Topics:
Bridges (Structures)
,
Cranes
,
Design
,
Fatigue
,
Gantry cranes
,
High strength steel
,
Impact
,
Ocean engineering
,
Ships
,
Stress
Integrity of Subsea Control Umbilical
OMAE 2014; V06AT04A053https://doi.org/10.1115/OMAE2014-23778
Topics:
Ocean engineering
,
Stress
,
Armor
,
Cables
,
Fatigue life
,
Fillers (Materials)
,
Finite element methods
,
Fluids
,
Hydraulic control
,
Manufacturing systems
Material Property Testing for Finite Element Modelling of Coatings
OMAE 2014; V06AT04A054https://doi.org/10.1115/OMAE2014-23837
Topics:
Coatings
,
Finite element analysis
,
Materials properties
,
Modeling
,
Testing
,
Insulation
,
Pipes
,
Printing
,
Clamps (Tools)
,
Friction
Full Scale Application of Thermal Ageing in Line Pipe Material Selection for Deepwater Pipelines
OMAE 2014; V06AT04A055https://doi.org/10.1115/OMAE2014-23869
Topics:
Pipelines
,
Pipes
,
Collapse
,
Design
,
Testing
,
Wall thickness
,
Water
,
Databases
,
Pipe joints
,
Pressure
Bursting Capacity and Debonding of Ultra Deep Composite Production Riser: A Safety Assessment
OMAE 2014; V06AT04A056https://doi.org/10.1115/OMAE2014-23872
Topics:
Composite materials
,
Pipeline risers
,
Risers (Casting)
,
Safety
,
Stress
,
Failure
,
Pressure
,
Seas
,
Steel
,
Tension
On Determination of Acceptable Safety Class in Design of Pipe-In-Pipe (PIP) Systems
OMAE 2014; V06AT04A058https://doi.org/10.1115/OMAE2014-23911
Topics:
Design
,
Pipes
,
Safety
,
Failure mechanisms
,
Insulation
,
Annulus
,
Containment
,
Fluids
,
Heat transfer coefficients
,
Ocean engineering
Flexible Riser Carcass Collapse Analyses: Sensitivity on Radial Gaps and Bending
OMAE 2014; V06AT04A059https://doi.org/10.1115/OMAE2014-23922
Topics:
Collapse
,
Flexible risers
,
Pipes
,
Failure
,
Finite element analysis
,
Pipeline risers
,
Pressure
,
Risers (Casting)
,
Buckling
,
Manufacturing
End Fitting Effect on Tensile Armor Stress Evaluation in Bent Flexible Pipe
OMAE 2014; V06AT04A060https://doi.org/10.1115/OMAE2014-23928
Topics:
Armor
,
Fittings
,
Pipes
,
Stress
,
Wire
,
Friction
,
Boundary-value problems
,
Displacement
,
Finite element model
,
Pipe bending
A Methodology to Predict the Remaining Fatigue Life of a Flexible Pipe With Broken Tensile Armor Wires
José Renato M. de Sousa, Fernando Jorge M. de Sousa, Marcos Q. de Siqueira, Luís Volnei S. Sagrilo, George Campello, Carlos Alberto D. de Lemos
OMAE 2014; V06AT04A061https://doi.org/10.1115/OMAE2014-23969
Topics:
Armor
,
Fatigue life
,
Pipes
,
Wire
,
Damage
,
Computation
,
Failure
,
Inspection
,
Rupture
On the Axisymmetric Response of a Damaged Flexible Pipe
OMAE 2014; V06AT04A062https://doi.org/10.1115/OMAE2014-23984
Topics:
Pipes
,
Wire
,
Tension
,
Armor
,
Stress
,
Torsion
,
Elongation
,
Finite element analysis
,
Finite element model
,
Stiffness
Email alerts
Most Read Proceedings Papers in OMAE
OMAE2024 Front Matter
OMAE2024
OMAE2024 Front Matter
OMAE2024