Skip Nav Destination
Proceedings Papers
In This Volume
Volume 5: Materials Technology; Petroleum Technology
Materials Technology
Estimating Long-Endurance Fatigue Strength of Girth-Welded Pipes Using Local Stress Approach
OMAE 2014; V005T03A001https://doi.org/10.1115/OMAE2014-23066
Topics:
Fatigue strength
,
Pipes
,
Stress
,
Welded joints
,
Stress concentration
,
Cycles
,
Fatigue design
,
Fatigue limit
,
Fatigue testing
,
Finite element analysis
Effect of Embedded Electric Sensor on the Structural Strength of Filament Wound Hybrid Composite
OMAE 2014; V005T03A002https://doi.org/10.1115/OMAE2014-23069
Topics:
Composite materials
,
Sensors
,
Glass fibers
,
Carbon fibers
,
Numerical analysis
,
Pipes
,
Carbon
,
Computer simulation
,
Drills (Tools)
,
Electrical conductivity
Viscoelastic Behaviour of Bitumen in Dynamic Control Umbilicals
OMAE 2014; V005T03A003https://doi.org/10.1115/OMAE2014-23178
Topics:
Asphalt
,
Bituminous materials
,
Pitch (Bituminous material)
,
Viscoelasticity
,
Friction
,
Wire
,
Steel
,
Cables
,
Design
,
Vessels
A New Recommended Practice for Inspection Planning of Fatigue Cracks in Offshore Structures Based on Probabilistic Methods
OMAE 2014; V005T03A005https://doi.org/10.1115/OMAE2014-23188
Topics:
Fatigue cracks
,
Inspection
,
Offshore structures
,
Fatigue
,
Fracture (Materials)
,
Fracture mechanics
,
In-service inspection
,
Probability
,
Design
,
Education
Experimental Investigation of Steel Coiled Tubes Performance Under Cyclic Bending
OMAE 2014; V005T03A006https://doi.org/10.1115/OMAE2014-23208
Topics:
Steel
,
Drilling
,
Fatigue
,
Machinery
,
Bending strength
,
Design
,
Mineral exploration
,
Petroleum industry
,
Rocks
,
Tubing
The Effect of Nickel on Fracture Toughness at Low Temperature for Hydrogen Pre-Charged Steel Samples
Lorenzo Marzari Félix, José Eduardo Ferreira da Fonseca, Carlos Fortis Kwietniewski, Marcelo Favaro Borges, Jefferson Haag, Giovanni Dalpiaz
OMAE 2014; V005T03A007https://doi.org/10.1115/OMAE2014-23274
Topics:
Fracture toughness
,
Hydrogen
,
Low temperature
,
Nickel
,
Steel
,
Carbon dioxide
,
Pipelines
,
Cathodic protection
,
Failure
,
Temperature
Erratum: “The Effect of Nickel on Fracture Toughness at Low Temperature for Hydrogen Pre-Charged Steel Samples” [ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering, Volume 5: Materials Technology; Petroleum Technology, San Francisco, California, USA, June 8–13, 2014, Conference Sponsors: Ocean, Offshore and Arctic Engineering Division, ISBN: 978-0-7918-4545-5, Copyright © 2014 by ASME. Paper No. OMAE2014-23274, pp. V005T03A007; 7 pages; doi:10.1115/OMAE2014-23274]
Lorenzo Marzari Félix, José Eduardo Ferreira da Fonseca, Carlos Fortis Kwietniewski, Marcelo Favaro Borges, Jefferson Haag, Giovanni Dalpiaz
OMAE 2014; V005T03A007ehttps://doi.org/10.1115/OMAE2014-23274e
Topics:
Arctic engineering
,
Fracture toughness
,
Hydrogen
,
Low temperature
,
Materials science
,
Nickel
,
Ocean engineering
,
Oceans
,
Oil technology
,
Steel
Residual Stress Measurement in an Ultrasonic Peened Specimen
OMAE 2014; V005T03A010https://doi.org/10.1115/OMAE2014-23374
Topics:
Stress
,
Shot peening
,
Residual stresses
,
Deformation
,
Drilling
,
Fatigue
,
Gages
,
Metal fatigue
,
Ocean engineering
,
Steel
Fatigue Evaluation Procedures for Multiaxial Loading in Welded Structures Using Battelle Structural Stress Approach
OMAE 2014; V005T03A013https://doi.org/10.1115/OMAE2014-23459
Topics:
Fatigue
,
Stress
,
Shear (Mechanics)
,
Cycles
,
Damage
,
Design
,
Electromagnetic scattering
,
Failure
,
Fatigue design
Corrosion-Fatigue of Ti 29 Alloy in a Sour Brine Environment
OMAE 2014; V005T03A014https://doi.org/10.1115/OMAE2014-23513
Topics:
Alloys
,
Corrosion
,
Fatigue
,
Steel
,
Fracture (Materials)
,
Fatigue cracks
,
Seawater
,
Titanium alloys
,
Crude oil
,
Deepwater development
Microstructure Identification for X80 Plates/Pipes With Low Temperature Toughness and Enhanced Strain Capacity
OMAE 2014; V005T03A015https://doi.org/10.1115/OMAE2014-23538
Topics:
Fracture toughness
,
Low temperature
,
Pipes
,
Plates (structures)
,
Cooling
,
Design
,
Pipelines
,
Steel
,
Testing equipment
,
Arctic region
Fusion Zone Microstructure Associated With Embrittlement of Subsea Dissimilar Joints
OMAE 2014; V005T03A017https://doi.org/10.1115/OMAE2014-23643
Topics:
Embrittlement
,
Ocean engineering
,
Alloys
,
Forging
,
Hydrogen
,
Diffusion (Physics)
,
Heat
,
Hydrogen embrittlement
,
Joining
,
Manifolds
Lessons Learned From Auditing Structural Integrity Management
OMAE 2014; V005T03A019https://doi.org/10.1115/OMAE2014-23676
Topics:
Ocean engineering
,
Petroleum
,
Safety
Performance Evaluation of High Quality HFW Linepipe by a Series of Full-Scale Pipe Tests
OMAE 2014; V005T03A020https://doi.org/10.1115/OMAE2014-23755
Topics:
Performance evaluation
,
Pipes
,
Low temperature
,
Fracture toughness
,
Fatigue testing
,
Hydrostatics
,
Pressure
,
Safety
,
Cable reels
,
Electrical resistance
Full Scale Reeling Simulation Test of X65 HFW Linepipe
OMAE 2014; V005T03A021https://doi.org/10.1115/OMAE2014-23760
Topics:
Simulation
,
Fracture toughness
,
Cable reels
,
Low temperature
,
Mechanical properties
,
Pipelines
,
Pipes
,
Underwater pipelines
,
Buckling
,
Coatings
Mechanical Properties of Newly Developed API X80 Grade HFW Linepipe for Long-Term Exposure at Elevated Temperature
Shunsuke Toyoda, Sota Goto, Takatoshi Okabe, Yasushi Kato, Satoshi Igi, Tomohiro Inoue, Motoharu Egi
OMAE 2014; V005T03A022https://doi.org/10.1115/OMAE2014-23765
Topics:
American Petroleum Institute
,
Mechanical properties
,
Temperature
,
Pipes
,
High temperature
,
Steam
,
Creep
,
Heat treating (Metalworking)
,
Reliability
,
Rupture
Fatigue Assessment of Thin Welded Joints From Invar Alloy by Local Stress Concept
OMAE 2014; V005T03A023https://doi.org/10.1115/OMAE2014-23825
Topics:
Alloys
,
Fatigue
,
Invar
,
Stress
,
Welded joints
,
Fatigue design
,
Finite element analysis
,
Liquefied natural gas
,
Temperature
,
Containment systems
An Experimental Study for Fatigue Performance of 7% Nickel Steels for Type B LNG Carriers
Young Woo Kim, Jae Myung Lee, Myung Hyun Kim, Byeong Jae Noh, Hee Joon Sung, Ryuichi Ando, Toshiyuki Matsumoto
OMAE 2014; V005T03A025https://doi.org/10.1115/OMAE2014-23885
Topics:
Fatigue
,
Liquefied natural gas
,
Nickel
,
Steel
,
Storage
,
Temperature
,
Base metals
,
Fatigue cracks
,
Fatigue properties
,
Fatigue testing
Estimation of Failure Parameters for Finite Element Simulations Based on a Single State of Stress and Arbitrary Stress-Strain Relation
OMAE 2014; V005T03A026https://doi.org/10.1115/OMAE2014-23900
Topics:
Engineering simulation
,
Failure
,
Finite element analysis
,
Simulation
,
Stress
,
Stress-strain relations
,
Ocean engineering
,
Ships
,
Storage tanks
,
Calibration
Offshore Structural Steel Plates for Extreme Low Temperature Service With Excellent HAZ Toughness
Katsuyuki Ichimiya, Kazukuni Hase, Shigeru Endo, Yusuke Terazawa, Takaki Fujiwara, Masayuki Hashimoto, Shinichi Suzuki
OMAE 2014; V005T03A027https://doi.org/10.1115/OMAE2014-23907
Topics:
Fracture toughness
,
Low temperature
,
Ocean engineering
,
Plates (structures)
,
Structural steel
,
Design
,
Offshore structures
,
Steel
,
Temperature
,
Arctic region
Relating Structural Loading Rate to Testing Rate for Fracture Mechanics Specimens
OMAE 2014; V005T03A028https://doi.org/10.1115/OMAE2014-23962
Topics:
Fracture mechanics
,
Testing
,
Brittleness
,
Ocean engineering
,
Temperature
,
Fracture toughness
,
Phase transition temperature
,
Safety
,
Ships
,
Steel
Enhanced Collapse Resistance of Compressed Steel Pipes
OMAE 2014; V005T03A029https://doi.org/10.1115/OMAE2014-24045
Topics:
Collapse
,
Pipes
,
Steel
,
Compression
,
External pressure
,
Finite element analysis
,
Tube bending
,
Arches
,
Computer simulation
,
Design
Hydrogen Induced Stress Cracking on Superduplex Stainless Steel Under Cathodic Protection
José Fonseca, Tiago Renck, Eliakin Abreu, Fabrício P. Santos, Bruno Diehl, Carlos E. Fortis Kwietniewski
OMAE 2014; V005T03A031https://doi.org/10.1115/OMAE2014-24251
Topics:
Cathodic protection
,
Cracking (Materials)
,
Fracture (Process)
,
Hydrogen
,
Stainless steel
,
Stress
,
Corrosion
,
Fracture toughness
,
Carbon steel
,
Alloys
Review of Low-Constraint Fracture Resistance Testing With SENT Specimens
OMAE 2014; V005T03A032https://doi.org/10.1115/OMAE2014-24281
Topics:
Fracture (Materials)
,
Testing
,
Fracture (Process)
,
ASTM International
,
Design
,
Displacement
,
Fracture toughness
,
Materials properties
,
Pipelines
,
Pipes
Assessment of Pipeline Integrity Based on Successive Inspection Data
OMAE 2014; V005T03A035https://doi.org/10.1115/OMAE2014-24519
Topics:
Inspection
,
Pipeline integrity
,
Pipelines
,
Uncertainty
,
Accounting
,
Corrosion
,
Pipeline systems
Fasteners in Subsea Applications: End User Experiences and Requirements
OMAE 2014; V005T03A036https://doi.org/10.1115/OMAE2014-24520
Topics:
Fasteners
,
Ocean engineering
,
Failure
,
Quality control
,
Steel
,
ASTM International
,
Cathodic protection
,
Design
,
Hydrogen
,
Manufacturing
Residual Stresses in Weld Repairs and Mitigation by Design
OMAE 2014; V005T03A038https://doi.org/10.1115/OMAE2014-24547
Topics:
Design
,
Maintenance
,
Residual stresses
,
Manufacturing
,
Welded joints
,
Finite element analysis
,
Geometry
,
Membranes
,
Modeling
,
Stress
Heavy Wall Linepipe Girth Weld Fatigue Strength: Investigating Weld Root Performance
Israel Marines-Garcia, Noe Mota, Philippe P. Darcis, Hector M. Quintanilla, Wan C. Kan, Rupak Ghosh, Tyler Visco
OMAE 2014; V005T03A039https://doi.org/10.1115/OMAE2014-24603
Topics:
Corrosion
,
Failure
,
Fatigue
,
Fatigue failure
,
Fatigue strength
,
Fatigue testing
,
Fluids
,
Fracture (Materials)
,
Gas metal arc welding
,
Grinding
The Effect of Notch Sharpness on the Fracture Toughness Determined From SENT Specimens
OMAE 2014; V005T03A040https://doi.org/10.1115/OMAE2014-24663
Topics:
Fracture toughness
,
Fatigue
,
Electrical discharge machining
,
Testing
,
Stress
,
Temperature
,
Brittleness
,
Displacement
,
Fracture (Materials)
,
Fracture (Process)
Fatigue Damage Evaluation in Ferromagnetic Steel by Mechanical and Piezomagnetic Measurements
OMAE 2014; V005T03A041https://doi.org/10.1115/OMAE2014-24690
Topics:
Fatigue damage
,
Steel
,
Fatigue
,
Failure
,
Cycles
,
Damage
,
Fatigue testing
,
Magnetic fields
,
Stress
,
Stress-strain curves
Fatigue Precracking Methodology for HDPE
OMAE 2014; V005T03A042https://doi.org/10.1115/OMAE2014-24692
Topics:
Density
,
Fatigue
,
Fatigue cracks
,
Fracture (Materials)
,
Fracture mechanics
,
Ocean engineering
,
Petroleum
,
Polymers
,
Reservoirs
,
Tension
Dissimilar Metal Welding of Nitronic 50 HS® and 25% Cr Super Duplex Stainless Steel
Nathan Nissley, Timothy D. Anderson, Fredrick F. Noecker, II, Caleb Roepke, Morgan Gallagher, Martin Hukle
OMAE 2014; V005T03A043https://doi.org/10.1115/OMAE2014-24706
Topics:
Metals
,
Stainless steel
,
Welding
,
Solidification
,
Heat
,
Tubing
,
Intermetallic compounds
,
Corrosion resistance
,
Ocean engineering
,
Arc welding
Finite Element Analysis Applied in Structural Integrity Management
OMAE 2014; V005T03A044https://doi.org/10.1115/OMAE2014-24715
Topics:
Finite element analysis
,
Fracture (Materials)
,
Stress
,
Bearings
,
Hinges
,
Inspection
,
Modeling
,
Arches
,
Construction
,
Cracking (Materials)
Petroleum Technology
Software Simulation for Making Severe Slugging Control Strategy in Deepwater Riser
OMAE 2014; V005T11A001https://doi.org/10.1115/OMAE2014-23031
Topics:
Computer software
,
Pipeline risers
,
Risers (Casting)
,
Simulation
,
Slug flows
,
Natural gas fields
,
Flow (Dynamics)
,
Design
,
Flexible risers
,
Fluids
Pressure Profile in Annulus: Solids Play a Significant Role
OMAE 2014; V005T11A002https://doi.org/10.1115/OMAE2014-23088
Topics:
Annulus
,
Pressure
,
Solids
,
Drilling
,
Flow (Dynamics)
,
Fluids
,
Friction
,
Pressure control
,
Pressure gradient
,
Risk
Brine Chemistry Effects in Waterflood and CO2 Injection in Carbonate Reservoirs
OMAE 2014; V005T11A003https://doi.org/10.1115/OMAE2014-23247
Topics:
Chemistry
,
Reservoirs
,
Tertiary petroleum recovery
,
Water
,
Carbon dioxide
,
Petroleum extraction
,
Diffusion (Physics)
,
Temperature
,
Density
,
Floods
Nanoparticles as Fluid Loss Control Additives for Hydraulic Fracturing of Tight and Ultra-Tight Hydrocarbon-Bearing Formations
OMAE 2014; V005T11A004https://doi.org/10.1115/OMAE2014-23279
Topics:
Bearings
,
Fluids
,
Hydraulic fracturing
,
Nanoparticles
,
Fracture (Materials)
,
Fracture (Process)
,
Permeability
,
Enzymes
,
Polymers
,
Rocks
Density and Drag Reduction With Hollow Glass Additives
OMAE 2014; V005T11A005https://doi.org/10.1115/OMAE2014-23401
Topics:
Density
,
Drag reduction
,
Glass
,
Fluids
,
Rheology
,
Bubbles
,
Drilling
,
Fluid density
,
Flow (Dynamics)
,
Hydraulics
Numerical Simulation and Experimental Research on Dewatering Hydrocyclone
OMAE 2014; V005T11A006https://doi.org/10.1115/OMAE2014-23419
Topics:
Computer simulation
,
Dewatering
,
Pipes
,
Computational fluid dynamics
,
Design
,
Ocean engineering
,
Oil fields
,
Algorithms
,
Computer software
,
Crude oil
Selection of an Offshore Petroleum Production System by Evaluating an Environmental Impact Index
OMAE 2014; V005T11A007https://doi.org/10.1115/OMAE2014-23461
Topics:
Manufacturing systems
,
Ocean engineering
,
Petroleum
,
Wells
,
Hydrocarbon reservoirs
,
Natural gas fields
,
Nuclear decommissioning
,
Storage
,
Water
Design of Hydrocyclone With Axial Inlet and its Performance Used in Wellbore
OMAE 2014; V005T11A008https://doi.org/10.1115/OMAE2014-23537
Topics:
Design
,
Fluids
,
Water
,
Oil fields
,
Disks
,
Rotation
,
Axial flow
,
Flow (Dynamics)
,
Ocean engineering
,
Optimization
Experimental Assessment of the Behaviour of a Pipe Vibration Damper Underwater
Sergio N. Bordalo, Celso K. Morooka, Luan G. Tochetto, Renato Pavanello, Gangbing Song, John C. Bartos
OMAE 2014; V005T11A010https://doi.org/10.1115/OMAE2014-23661
Topics:
Pipes
,
Vibration dampers
,
Oscillations
,
Water
,
Excitation
,
Vibration
,
Computer simulation
,
Computers
,
Currents
,
Dampers
Evaluation of Pressure Change While Steady-State Tripping
OMAE 2014; V005T11A011https://doi.org/10.1115/OMAE2014-23672
Topics:
Pressure
,
Steady state
,
Fluids
,
Annulus
,
Cylinders
,
String
,
Algorithms
,
Approximation
,
Computer simulation
,
Damage
Optimization of MEG Injection and Regeneration System for Offshore Gas Fields Using Multiphase Simulation and Synergistic Inhibition Strategies
OMAE 2014; V005T11A012https://doi.org/10.1115/OMAE2014-23705
Topics:
Natural gas fields
,
Ocean engineering
,
Optimization
,
Simulation
,
Pressure
,
Temperature
,
Design
,
Natural gas wells
,
Water
,
Cooling
Estimation of Weight and Torque on Bit: Assessment of Uncertainties, Correction and Calibration Methods
OMAE 2014; V005T11A013https://doi.org/10.1115/OMAE2014-23866
Topics:
Calibration
,
Torque
,
Uncertainty
,
Weight (Mass)
,
Drilling
,
Bits (Tools)
,
Drag (Fluid dynamics)
,
Optimization
,
Rocks
,
Stress
The Shielding Effect of Drilling Fluids on MWD Downhole Compasses: The Effect of Drilling Fluid Composition, Contaminants and Rheology
OMAE 2014; V005T11A014https://doi.org/10.1115/OMAE2014-23881
Topics:
Drilling
,
Fluids
,
Rheology
,
Errors
,
Ions
,
Iron
,
Magnetic shielding
,
Magnetometers
,
Poles (Building)
,
Steel
Viscoelasticity and Drilling Fluid Performance
OMAE 2014; V005T11A015https://doi.org/10.1115/OMAE2014-23908
Topics:
Drilling
,
Fluids
,
Viscoelasticity
,
Shear (Mechanics)
,
Thixotropy
,
Rheology
,
Rheometers
,
Density
,
Steady state
,
American Petroleum Institute
The Effect of Different Drilling Fluids on Borehole Mechanical Friction
OMAE 2014; V005T11A016https://doi.org/10.1115/OMAE2014-23959
Topics:
Drilling
,
Fluids
,
Friction
,
Particulate matter
,
Disks
,
Tribology
,
Water
,
Construction
,
Drag (Fluid dynamics)
,
Drill strings
Experimental Study of Cuttings Transport Efficiency of Water Based Drilling Fluids
Jan David Ytrehus, Ali Taghipour, Bjørnar Lund, Benjamin Werner, Nils Opedal, Arild Saasen, Zalpato Ibragimova
OMAE 2014; V005T11A017https://doi.org/10.1115/OMAE2014-23960
Topics:
Drilling
,
Fluids
,
Water
,
American Petroleum Institute
,
Flow (Dynamics)
,
Concretes
,
Construction
,
Drill strings
,
Hydraulics
,
Instrumentation
A Comparative Study of Hole Cleaning Performance — Water Versus Drag Reducing Fluid
OMAE 2014; V005T11A018https://doi.org/10.1115/OMAE2014-24083
Topics:
Drag (Fluid dynamics)
,
Fluids
,
Water
,
Pipes
,
Pressure
,
Flow (Dynamics)
,
Fracture (Materials)
,
Fracture (Process)
,
Geometry
,
Risk
Cement Sheath Integrity Implications of Scaled-Down Wellbore Casing-Cement-Formation Sections
OMAE 2014; V005T11A019https://doi.org/10.1115/OMAE2014-24266
Topics:
Cements (Adhesives)
,
Stress
,
Pressure
,
Stress concentration
,
Temperature
,
Wells
,
Annulus
,
Failure
,
Finite element analysis
,
Fracture (Materials)
Combination of Petroleum Correlations and Drift-Flux Approaches: A New Model for Two-Phase Flow Pressure Gradient Calculation for Horizontal and Slightly Inclined Upward Flowlines
OMAE 2014; V005T11A020https://doi.org/10.1115/OMAE2014-24313
Topics:
Petroleum
,
Pressure gradient
,
Two-phase flow
,
Friction
,
Flow (Dynamics)
,
Center of mass
,
Momentum
Modeling of Hydraulic Fracture Network Propagation in Shale Gas Reservoirs
OMAE 2014; V005T11A021https://doi.org/10.1115/OMAE2014-24481
Topics:
Fracture (Materials)
,
Fracture (Process)
,
Modeling
,
Reservoirs
,
Shales
,
Computer simulation
,
Anisotropy
,
Drilling
,
Flow simulation
,
Fracture toughness
Investigation of the Influence of Screw Connections in Drill-Strings on the Propagation of Torsional Waves With Respect to Advanced Stick-Slip Controllers
OMAE 2014; V005T11A022https://doi.org/10.1115/OMAE2014-24545
Topics:
Control equipment
,
Drill strings
,
Screws
,
Stick-slip
,
Waves
,
Computer simulation
,
Vibration
,
Drilling rigs
,
Drills (Tools)
,
Geothermal engineering
Impact of Physical and Chemical Mud Contamination on Cement-Formation Shear Bond Strength
OMAE 2014; V005T11A023https://doi.org/10.1115/OMAE2014-24596
Topics:
Bond strength
,
Cements (Adhesives)
,
Contamination
,
Shear (Mechanics)
,
Fluids
,
Drilling
,
Failure
,
Annulus
,
Fracture (Materials)
,
Geothermal engineering
An Experimental Study of Smart Waterflooding on Fractured Carbonate Reservoirs
OMAE 2014; V005T11A024https://doi.org/10.1115/OMAE2014-24597
Topics:
Reservoirs
,
Water
,
Rocks
,
Fracture (Materials)
,
Fracture (Process)
,
Petroleum extraction
,
Crude oil
,
Displacement
,
Dynamics (Mechanics)
,
Fluid dynamics
Influence of Short Polypropylene Fibers on the Toughness of High Performance Cement Slurries
Thayane Martins Barghigiani, Romildo Dias Toledo Filho, Vivian K. C. B. L. M. Balthar, Cristiane R. Miranda, Reila V. Velasco
OMAE 2014; V005T11A025https://doi.org/10.1115/OMAE2014-24618
Topics:
Cements (Adhesives)
,
Fracture toughness
,
Polypropylene fibers
,
Slurries
,
Fibers
,
Fracture (Process)
,
Compression
,
Fluid density
,
Stability
,
Brittle fracture
An Analytical Elasto-Plastic Analysis for Stability of Axisymmetric Wellbore
OMAE 2014; V005T11A026https://doi.org/10.1115/OMAE2014-24619
Topics:
Boundary-value problems
,
Collapse
,
Compression
,
Differential equations
,
Drilling
,
Failure
,
Hardening
,
Mechanical properties
,
Rocks
,
Shear (Mechanics)
Real-Time Software to Estimate Friction Coefficient and Downhole Weight on Bit During Drilling of Horizontal Wells
OMAE 2014; V005T11A027https://doi.org/10.1115/OMAE2014-24620
Topics:
Computer software
,
Drilling
,
Friction
,
Weight (Mass)
,
Wells
,
Drill strings
,
Drag (Fluid dynamics)
,
Torque
,
Bits (Tools)
,
Engineering standards
Rheology and Hydration of Cementitious Slurries
OMAE 2014; V005T11A028https://doi.org/10.1115/OMAE2014-24630
Topics:
Rheology
,
Slurries
,
Temperature
,
Cements (Adhesives)
,
Temperature effects
,
Calorimetry
,
Fluids
,
Heat
,
Oil wells
,
Rheometers
Modelling Rheological Behavior of Fresh Cement-Sand Mixtures
OMAE 2014; V005T11A029https://doi.org/10.1115/OMAE2014-24631
Topics:
Cements (Adhesives)
,
Modeling
,
Rheology
,
Sands
,
Particulate matter
Investigation of Back Pressure Effects on Transient Gas Flow Through Porous Media via Laboratory Experiments and Numerical Simulation
OMAE 2014; V005T11A030https://doi.org/10.1115/OMAE2014-24648
Topics:
Computer simulation
,
Gas flow
,
Porous materials
,
Pressure
,
Transients (Dynamics)
,
Reservoirs
,
Natural gas wells
,
Steady state
,
Unsteady flow
,
Waves
Experimental Investigation of Reservoir Stress Path Hysteresis During Production-Injection Periods
OMAE 2014; V005T11A031https://doi.org/10.1115/OMAE2014-24653
Topics:
Reservoirs
,
Stress
,
Pressure
,
Fracture (Process)
,
Poisson ratio
,
Design
,
Wells
,
Engineering standards
,
Fluids
,
Leakage
Comparison of Dynamic Loading of Light Weight and Steel Drillpipes During Tripping Operations
OMAE 2014; V005T11A032https://doi.org/10.1115/OMAE2014-24654
Topics:
Dynamic testing (Materials)
,
Steel
,
Weight (Mass)
,
Drill strings
,
Stress
,
Wells
,
Drilling
,
Composite materials
,
Drills (Tools)
,
Pipes
Quantitative Risk Assessment (QRA) of an Exploratory Drilling Oil Spill in Deepwater Gulf of Mexico
OMAE 2014; V005T11A034https://doi.org/10.1115/OMAE2014-24685
Topics:
Drilling
,
Gulf of Mexico
,
Risk assessment
,
Flow (Dynamics)
,
Reservoirs
,
Ocean engineering
,
Risk
,
Accidents
,
Drills (Tools)
,
Pipes
Effect of Tube Wall Wettability on the Onset of Churning in Upward Gas-Liquid Annular Flow
OMAE 2014; V005T11A036https://doi.org/10.1115/OMAE2014-24687
Topics:
Flow (Dynamics)
,
Coating processes
,
Coatings
,
Pressure drop
,
Drops
,
Flow visualization
,
Friction
,
Hydrostatics
,
Liquid films
,
Pipes
Predicting the Gain From Deliquification Measures for European Wells
OMAE 2014; V005T11A037https://doi.org/10.1115/OMAE2014-24688
Topics:
Wells
,
Natural gas wells
,
Inflow
,
North Sea
,
Pressure drop
,
Reservoirs
,
Tubing
Relation Between the Mechanical Specific Energy, Cuttings Morphology, and PDC Cutter Geometry
OMAE 2014; V005T11A038https://doi.org/10.1115/OMAE2014-24708
Topics:
Geometry
,
Polycrystalline diamond compact bits
,
Particle size
,
Rocks
,
Cutting
,
Drilling
,
Grain size
,
Test facilities
,
Fracture (Materials)
,
Fracture (Process)