Skip Nav Destination
Proceedings Papers
Volume 6: Materials Technology; Polar and Arctic Sciences and Technology; Petroleum Technology Symposium
Materials Technology
Effect of the Hydrostatic Pressure in the Diffusible Hydrogen at the Underwater Wet Welding
Weslley Carlos Dias da Silva, Leandro Fonseca Ribeiro, Alexandre Queiroz Bracarense, Ezequiel Caires Pereira Pessoa
OMAE 2012; 1-8https://doi.org/10.1115/OMAE2012-83002
Topics:
Hydrogen
,
Hydrostatic pressure
,
Welding
,
Metals
,
Heat
,
Porosity
,
Maintenance
,
Welded joints
,
Bubbles
,
Computer software
Effect of Water or Soap Solution on Fatigue Crack Growth in Welded Steel
OMAE 2012; 67-72https://doi.org/10.1115/OMAE2012-83087
Topics:
Fatigue cracks
,
Steel
,
Water
,
Fatigue
,
Fracture (Materials)
,
Fatigue testing
,
Pipes
,
Stress
,
Welded joints
,
Corrosion
Residual Stress Management in Welding: Residual Stress Measurement and Improvement Treatments
OMAE 2012; 73-79https://doi.org/10.1115/OMAE2012-83177
Topics:
Stress
,
Welding
,
Residual stresses
,
Fatigue life
,
Engineering instruments
,
Welded joints
,
Computer software
,
Corrosion resistance
,
Cycles
,
Fatigue
Challenges in Inspection Planning for Maintenance of Static Mechanical Equipment on Ageing Oil and Gas Production Plants: The State of the Art
OMAE 2012; 91-103https://doi.org/10.1115/OMAE2012-83248
Topics:
Inspection
,
Maintenance
,
Risk-based maintenance
,
Design
,
Corrosion
,
Erosion
,
Fatigue
,
Pipes
,
Pressure
,
Product quality
Fatigue Design of Roller Bearing for Large FPSO Turrets
OMAE 2012; 105-116https://doi.org/10.1115/OMAE2012-83257
Topics:
Fatigue design
,
FPSO
,
Roller bearings
,
Stress
,
Design
,
Bearings
,
Rails
,
Shear stress
,
Wheels
,
Carbon steel
Numerical Analysis of Residual Stresses in Hyperbaric Welding
OMAE 2012; 137-143https://doi.org/10.1115/OMAE2012-83414
Topics:
Numerical analysis
,
Residual stresses
,
Welding
,
Pressure
,
Municipal solid wastes
,
Phase transitions
,
Pipes
,
Plasticity
,
Seawater
,
Stress
Challenges About Testing, Welding and NDT of CRA Pipelines in Brazilian Pre-Salt
Petrônio Zumpano, Jr., Genaro Zanon, Alexandre Galiani Garmbis, Luciano Braga Alkmin, Manfred Ronald Richter, Eduardo Valente Oazen, Paulo Nunez Chaves, Eduardo Hippert, Jr.
OMAE 2012; 145-151https://doi.org/10.1115/OMAE2012-83461
Topics:
Pipelines
,
Testing
,
Welding
,
Inspection
,
Overlays (Materials engineering)
,
Pipeline risers
,
Risers (Casting)
,
Carbon steel
,
Construction
,
Design
In-Service Fatigue Performance of SCR Girth Welds Installed by Reeling
Philippe P. Darcis, Eduardo Aguilar, Emma Erezuma, Israel Marines-Garcia, Eduardo A. Ruiz, Hector M. Quintanilla
OMAE 2012; 153-162https://doi.org/10.1115/OMAE2012-83465
Topics:
Fatigue
,
Welded joints
,
Damage
,
Pipeline risers
,
Risers (Casting)
,
Cable reels
,
Computer software
,
Cycles
,
Deformation
,
Engineering simulation
Underwater Stress Relief and Fatigue Improvement by Ultrasonic Peening
OMAE 2012; 163-167https://doi.org/10.1115/OMAE2012-83469
Topics:
Fatigue
,
Shot peening
,
Stress
,
Instrumentation
,
Residual stresses
,
Welded joints
,
Acoustics
,
Cooling
,
Corrosion protection
,
Design
Optimisation of Heat Pressure Welding of Steel Wire in Flexible Riser Manufacture, Applying Taguchi Design-of-Experiment Approaches
OMAE 2012; 177-185https://doi.org/10.1115/OMAE2012-83644
Topics:
Design
,
Flexible risers
,
Heat
,
Optimization
,
Pressure
,
Steel
,
Welding
,
Wire
,
High strength steel
,
Joining
Improvement of Fatigue Crack Growth Simulation Based on the Strip Yield Model Considering the Strain Hardening Effect of Materials
OMAE 2012; 187-194https://doi.org/10.1115/OMAE2012-83664
Topics:
Fatigue cracks
,
Simulation
,
Strips
,
Work hardening
,
Computer simulation
,
Fracture (Materials)
,
Displacement
,
Simulation results
,
Wakes
,
Weight (Mass)
Fatigue Life Improvement of Welded Doubling Plates
OMAE 2012; 195-202https://doi.org/10.1115/OMAE2012-83683
Topics:
Fatigue
,
Fatigue life
,
Grinding
,
Plates (structures)
Application of 7%Ni-TMCP Steel Plate to Large Scale LNG Storage Tank
Kazushi Onishi, Tomoya Kawabata, Takahiro Kamo, Yuichi Tanino, Maki Yamashita, Atsushi Iida, Masaki Kusagawa, Hiroshi Nishigami, Naokazu Sakato, Masahiko Mitsumoto, Syuichi Hirai, Hitoshi Hirose, Yukito Hagihara
OMAE 2012; 213-222https://doi.org/10.1115/OMAE2012-83782
Topics:
Liquefied natural gas
,
Steel
,
Storage tanks
,
Construction
,
Nickel
,
Temperature
,
Brittle fracture
,
Constants (Physics)
,
Containment
,
Design
Development of Corrosion Resistant Steel for Bottom Plates of Crude Oil Tankers and Onboard Evaluation Results
OMAE 2012; 223-228https://doi.org/10.1115/OMAE2012-83821
Topics:
Corrosion
,
Crude oil
,
Plates (structures)
,
Steel
,
Tankers
,
Corrosion resistance
,
Inspection
,
Alloys
,
Corrosion protection
,
Maintenance
Full Scale Sour Fatigue Testing With Dense Phase Gases
OMAE 2012; 235-245https://doi.org/10.1115/OMAE2012-83898
Topics:
Fatigue testing
,
Gases
,
Fracture (Materials)
,
Fatigue
,
Water
,
Pipelines
,
Steel
,
Fracture mechanics
,
High pressure (Physics)
,
Petrochemicals
Characterization of the Accuracy of the MFL Pipeline Inspection Tools
OMAE 2012; 247-251https://doi.org/10.1115/OMAE2012-83934
Topics:
Inspection
,
Pipelines
,
Uncertainty
,
Corrosion
,
Leakage
,
Life extension
,
Magnetic flux
,
Pipes
,
Reliability
,
Risk assessment
Microstructure and Mechanical Properties of API 5CT L80 Casing Grade Steel Quenched From Different Temperatures
OMAE 2012; 253-259https://doi.org/10.1115/OMAE2012-83937
Topics:
American Petroleum Institute
,
Mechanical properties
,
Steel
,
Temperature
,
Pipes
,
Forge welding
,
Heating
,
Welding
,
Dimensions
,
Electrical resistance
Girth Welding Development of Heavy Wall Materials for Severe Applications
Noé Mota-Solis, Mauricio Pelcastre, Eduardo Ruiz, Philippe Darcis, Jose Enrique Garcia-Gonzalez, Hector Quintanilla
OMAE 2012; 281-287https://doi.org/10.1115/OMAE2012-83950
Topics:
Welding
,
Fillers (Materials)
,
Gas metal arc welding
,
Mechanical properties
,
Metals
,
Ocean engineering
,
Pipes
,
Water
,
Electrodes
,
Fatigue
Small Scale Sour Fatigue Testing With Dense Phase Gases
OMAE 2012; 301-308https://doi.org/10.1115/OMAE2012-83973
Topics:
Fatigue testing
,
Gases
,
Water
,
Fracture (Materials)
,
Fatigue
,
Fatigue cracks
,
High pressure (Physics)
,
Temperature
,
Testing
,
Fatigue life
Sharp Phase Change in Shape Memory Alloy Thermal Actuators for Subsea Flow Control
OMAE 2012; 309-315https://doi.org/10.1115/OMAE2012-83979
Topics:
Actuators
,
Flow control
,
Ocean engineering
,
Shape memory alloys
,
Temperature
,
Valves
,
Wire
,
Failure
,
Springs
,
Annulus
Advancements in Thermoplastic Composite Riser Development
OMAE 2012; 335-343https://doi.org/10.1115/OMAE2012-84167
Topics:
Pipeline risers
,
Risers (Casting)
,
Thermoplastic composites
,
Design
,
Fibers
,
Pipes
,
Composite materials
,
Fittings
,
Safety
,
Stress
Polar and Arctic Sciences and Technology
Assessment of Container Mountings in Modular Offshore Platform Designs for Arctic Regions
OMAE 2012; 371-377https://doi.org/10.1115/OMAE2012-83021
Topics:
Arctic region
,
Containers
,
Offshore platforms
,
Friction
,
Stress
,
Young's modulus
,
Climate
,
Computation
,
Displacement
,
Engineering simulation
Arctic FPSO: Technical Feasibilities and Challenges
OMAE 2012; 379-385https://doi.org/10.1115/OMAE2012-83028
Topics:
Arctic region
,
FPSO
,
Icebergs
,
Flow (Dynamics)
,
Mooring
,
Storage
,
Collisions (Physics)
,
Crude oil
,
Design
,
Fire
Towards a Model for Propeller-Ice Interaction
OMAE 2012; 395-405https://doi.org/10.1115/OMAE2012-83088
Topics:
Ice
,
Propellers
,
Water
,
Computer software
,
Arctic Ocean
,
Arctic region
,
Computational methods
,
Flow (Dynamics)
,
Marine propellers
,
Natural resources
3-Dimensional Numerical Simulation of Ship Motion in Pack Ice
OMAE 2012; 407-414https://doi.org/10.1115/OMAE2012-83105
Topics:
Computer simulation
,
Ice
,
Ships
,
Arctic region
,
Damping
,
Drillships
,
Engineering simulation
,
Equations of motion
,
Modeling
,
Simulation
Jackup Designed for Optimum Operational Time in Ice Conditions
OMAE 2012; 439-442https://doi.org/10.1115/OMAE2012-83205
Topics:
Ice
,
Jack-up drilling rigs
,
Design
,
Drilling
,
Stress
,
Arctic region
,
Ice ridges
,
Icebreakers
,
Waves
,
Collapse
Planning for Construction Work in Cold Climate Regions
OMAE 2012; 449-455https://doi.org/10.1115/OMAE2012-83301
Topics:
Climate
,
Construction
,
Accounting
,
Logistics
,
Ocean engineering
,
Pipes
,
Seas
,
Uncertainty
Evacuation From Petroleum Facilities Operating in the Barents Sea
OMAE 2012; 457-466https://doi.org/10.1115/OMAE2012-83329
Topics:
Evacuations
,
Petroleum
,
Seas
,
Lifeboats
,
Meteorology
,
Ice
,
Vessels
,
Probability
,
Shorelines
,
Stability
Model DP System for Ice-Tank Research
OMAE 2012; 473-476https://doi.org/10.1115/OMAE2012-83383
Topics:
Ice
,
Algorithms
,
Dynamic positioning systems
,
Naval architecture
,
Arctic region
,
Manufacturing
,
Polar regions
,
Real-time control
,
Ships
,
Water
Numerical Simulation of a Floater in a Broken-Ice Field: Part II — Comparative Study of Physics Engines
OMAE 2012; 477-486https://doi.org/10.1115/OMAE2012-83430
Topics:
Computer simulation
,
Engines
,
Ice
,
Physics
,
Computer software
,
Dynamics (Mechanics)
,
Ice floes
,
Simulation
,
Vortices
,
Water
DYPIC - Dynamic Positioning in Ice: First Phase of Model Testing
OMAE 2012; 487-494https://doi.org/10.1115/OMAE2012-83455
Topics:
Dynamic positioning systems
,
Ice
,
Testing
,
Ice floes
,
Ships
,
Stress
,
Vessels
,
Bone
,
Engineering prototypes
,
Engineering standards
Iceberg Shape Sensitivity in Ship Impact Assessment in View of Existing Material Models
OMAE 2012; 507-517https://doi.org/10.1115/OMAE2012-83552
Topics:
Icebergs
,
Shapes
,
Ships
,
Ice
,
Arctic region
,
Deformation
,
Design
,
Hull
,
Stress
,
Water
AUV Guidance System for Subsurface Ice Intelligence
OMAE 2012; 529-535https://doi.org/10.1115/OMAE2012-83811
Topics:
Ice
,
Dynamics (Mechanics)
,
Kinematics
,
Navigation
,
Neural network models
The Mooring Bay Concept for LNG Loading in Harsh and Ice Conditions
OMAE 2012; 537-544https://doi.org/10.1115/OMAE2012-83841
Topics:
Ice
,
Liquefied natural gas
,
Mooring
,
Ocean engineering
,
Arctic region
,
Pipes
,
Numerical analysis
,
Tankers
,
Water
,
Climate change
Ice Model Tests in Context of the Investment Value of an Offshore Vessel
OMAE 2012; 545-554https://doi.org/10.1115/OMAE2012-83854
Topics:
Ice
,
Ocean engineering
,
Vessels
,
Ships
,
Arctic region
,
Design
,
Construction
,
Hull
,
Low temperature
,
Manufacturing
Influence of the Ice Concentration on the Ice Loads on the Hull of a Ship in a Managed Ice Field
OMAE 2012; 563-569https://doi.org/10.1115/OMAE2012-83927
Topics:
Hull
,
Ice
,
Ships
,
Stress
,
Arctic region
,
Construction
,
Control equipment
,
Dynamic positioning systems
,
Ice floes
,
Industrial research
Intervention Vessel for Barents Sea Operation
OMAE 2012; 571-578https://doi.org/10.1115/OMAE2012-83933
Topics:
Design
,
Ocean engineering
,
Seas
,
Vessels
Scaling of Flexural and Compressive Ice Failure
OMAE 2012; 589-595https://doi.org/10.1115/OMAE2012-84033
Topics:
Failure
,
Ice
,
Compression
,
Creep
,
Damage
,
Fracture (Materials)
,
Fracture (Process)
,
Stress
,
Testing
,
Aerospace engineering
Development of a Six-Component Blade Load Measurement Test Setup for Propeller-Ice Impact
OMAE 2012; 607-616https://doi.org/10.1115/OMAE2012-84192
Topics:
Blades
,
Ice
,
Propellers
,
Stress
,
Transducers
,
Force measurement
,
Manufacturing
,
Milling
,
Signals
,
Testing
Aspects of Importance Related to Arctic DP Operations
OMAE 2012; 617-623https://doi.org/10.1115/OMAE2012-84226
Topics:
Arctic region
,
Ice
,
Water
,
Boundary-value problems
,
Drilling
,
Dynamic positioning systems
,
Evacuations
,
Mooring
,
Vessels
Petroleum Technology Symposium
Mesoscale Modeling of Non-Isothermal Fluid Displacement in Capillary Tube Using Dissipative Particle Dynamics
OMAE 2012; 625-628https://doi.org/10.1115/OMAE2012-83485
Topics:
Displacement
,
Fluids
,
Modeling
,
Particle dynamics
,
Computers
,
Energy conservation
,
Flow (Dynamics)
,
Fluid dynamics
,
Reservoirs
,
Simulation
Uncertainty of Long Term Fatigue Load of Subsea Well Heads
OMAE 2012; 639-646https://doi.org/10.1115/OMAE2012-83686
Topics:
Fatigue
,
Ocean engineering
,
Stress
,
Uncertainty
,
Fatigue damage
,
Pipeline risers
,
Risers (Casting)
,
Design
,
Waves
,
Cycles
Wax Deposition in Laminar and Turbulent Flow in Pipelines
OMAE 2012; 647-654https://doi.org/10.1115/OMAE2012-83813
Topics:
Pipelines
,
Turbulence
,
Glass
,
Heat
,
Computer simulation
,
Design
,
Diluents
,
Engineering simulation
,
Geometry
,
Imaging
Modeling Oscillatory Behavior of ESP Wells Under Two-Phase Flow Conditions
OMAE 2012; 667-674https://doi.org/10.1115/OMAE2012-84029
Topics:
Modeling
,
Two-phase flow
,
Wells
,
Flow (Dynamics)
,
Computation
,
Dynamic systems
,
Gas flow
,
Pumps
,
Simulation
,
Stability
Well Control Research and Development
OMAE 2012; 675-685https://doi.org/10.1115/OMAE2012-84032
Topics:
Columns (Structural)
,
Computer simulation
,
Computer software
,
Drilling
,
Engineers
,
Fluids
,
Geometry
,
Industrial research
,
Innovation
,
Modeling
A Study of Hydrocarbon Releases in the Gulf of Mexico, 1996 Thru 2010
OMAE 2012; 719-729https://doi.org/10.1115/OMAE2012-84123
Topics:
Gulf of Mexico
,
Fluids
,
Safety
,
Wells
,
Containment
,
Disasters
,
Drilling
,
Explosions
,
Fire
,
Flow (Dynamics)
Rheological Characterization and Mechanical Behavior of Polymer Powder Modified-Cement Pastes and Wollastonite Fibers Reinforced Cement Pastes
OMAE 2012; 799-803https://doi.org/10.1115/OMAE2012-84208
Topics:
Cements (Adhesives)
,
Fibers
,
Mechanical behavior
,
Polymers
,
Rheology
,
Fracture toughness
,
Compressive strength
,
Cylinders
,
Deformation
,
Design
Effect of the Sodium and Potassium Chloride on the Mechanical and Plastic Properties on the Oil Well Cement Slurries
Camila Aparecida Abelha Rocha, Cristina Aiex Simão, Guilherme Chagas Cordeiro, Romildo Dias Toledo Filho
OMAE 2012; 805-811https://doi.org/10.1115/OMAE2012-84209
Topics:
Cements (Adhesives)
,
Oil wells
,
Plasticity
,
Potassium
,
Slurries
,
Sodium
,
Rocks
,
Water
,
Compressive strength
,
Fluids
Optimizing the Location of Platforms and Manifolds
OMAE 2012; 813-818https://doi.org/10.1115/OMAE2012-84211
Topics:
Manifolds
,
Pipelines
,
Wells
,
Ocean engineering
,
Reservoirs
,
Flow (Dynamics)
,
Fluids
,
Optimization
,
Petroleum engineering
,
Pressure
Dynamic Evaluation of Invasion and Backflow in Carbonate and Sandstone Reservoirs
OMAE 2012; 819-828https://doi.org/10.1115/OMAE2012-84213
Topics:
Damage
,
Drilling
,
Drills (Tools)
,
Flow (Dynamics)
,
Fluids
,
Multiphase flow
,
Permeability
,
Pressure
,
Reservoirs
,
Rocks
Experimental Study of the Impact of Drilling Fluid Contamination on the Integrity of Cement-Formation Interface
OMAE 2012; 879-885https://doi.org/10.1115/OMAE2012-84237
Topics:
Cements (Adhesives)
,
Contamination
,
Drilling
,
Fluids
,
Composite materials
,
Flow (Dynamics)
,
Displacement
,
Permeability
,
Porosity
,
Pressure
Email alerts
Most Read Proceedings Papers in OMAE
OMAE2024 Front Matter
OMAE2024