Volumes | International Conference on Offshore Mechanics and Arctic Engineering | American Society of Mechanical Engineers Digital Collection

Topics: Pressure , Underwater pipelines , Pipelines , Reliability , Pipeline risers , Risers (Casting) , Diluents , Ocean engineering , Piping design , Risk

An Investigation of Fatigue Damage due to VIV in Flexible Riser With Different Methodologies

Yanqiu Zhang, Zhimin Tan

OMAE 2011; 25-33https://doi.org/10.1115/OMAE2011-49036

Abstract

View Articletitled, An Investigation of Fatigue Damage due to VIV in Flexible Riser With Different Methodologies

PDF

Topics: Fatigue damage , Flexible risers , Vortex-induced vibration , Computer software , Simulation , Damage , Pipeline risers , Risers (Casting) , Vortices , Wakes

Assessment of Fatigue Damage Initiation in Oil and Gas Steel Pipes

Bianca Pinheiro, Jacky Lesage, Ilson Pasqualino, Noureddine Benseddiq

OMAE 2011; 35-44https://doi.org/10.1115/OMAE2011-49044

Abstract

View Articletitled, Assessment of Fatigue Damage Initiation in Oil and Gas Steel Pipes

PDF

Topics: Fatigue damage , Pipes , Steel , American Petroleum Institute , Fatigue , Fatigue testing , Failure , Computer simulation , Cracking (Materials) , Dislocations

Remaining Collapse Capacity of Corroded Pipelines

Qishi Chen, Mark Marley, Joe Zhou

OMAE 2011; 45-54https://doi.org/10.1115/OMAE2011-49054

Abstract

View Articletitled, Remaining Collapse Capacity of Corroded Pipelines

PDF

Topics: Collapse , Pipelines , Pipes , Corrosion , Wall thickness , Finite element model , Calibration , Computer simulation , Design , Errors

Elastic-Plastic Pull-In Strength and Damage Analyses of Steel Catenary Risers in Deepwater

C. H. Luk, S.-H. Mark Chang

OMAE 2011; 55-65https://doi.org/10.1115/OMAE2011-49086

Abstract

View Articletitled, Elastic-Plastic Pull-In Strength and Damage Analyses of Steel Catenary Risers in Deepwater

PDF

Topics: Damage , Steel catenary risers , Pipeline risers , Risers (Casting) , Stress , Design methodology , Fatigue damage , Water , Chain , Design

Challenges Faced in the Design of SLWR Configuration for the Pre-Salt Area

Stael Ferreira Senra, Marcio Martins Mourelle, Edmundo Queiroz de Andrade, Ana Lu´cia Fernandes Lima Torres

OMAE 2011; 67-75https://doi.org/10.1115/OMAE2011-49096

Abstract

View Articletitled, Challenges Faced in the Design of SLWR Configuration for the Pre-Salt Area

PDF

Topics: Design , Pipeline risers , Risers (Casting) , Tankers , Carbon dioxide , Fluids , Pipes , Corrosion , Drilling , Flow (Dynamics)

Flexible Pipes: Influence of the Pressure Armor in the Wet Collapse Resistance

Alfredo Gay Neto, Clo´vis de Arruda Martins

OMAE 2011; 77-86https://doi.org/10.1115/OMAE2011-49105

Abstract

View Articletitled, Flexible Pipes: Influence of the Pressure Armor in the Wet Collapse Resistance

PDF

Topics: Armor , Collapse , Pipes , Pressure , External pressure , Design , Displacement , Failure mechanisms , Finite element methods , Finite element model

Comparative Strength Analysis of Aluminum Drill Pipes With Steel Connectors Assembled by Different Methods

Vadim Tikhonov, Danila Davydov, Rudolf Alikin, Mikhail Gelfgat

OMAE 2011; 87-93https://doi.org/10.1115/OMAE2011-49112

Abstract

View Articletitled, Comparative Strength Analysis of Aluminum Drill Pipes With Steel Connectors Assembled by Different Methods

PDF

Topics: Aluminum , Drills (Tools) , Pipes , Steel , Stress , Manufacturing , Aluminum alloys , Cooling , Fatigue , Finite element analysis

The Effect of the Seabed Proximity on the Hydrodynamic Forces of the Piggyback Pipeline Under Wave Action

Xiaofei Cheng, Yongxue Wang, Guoyu Wang

OMAE 2011; 95-100https://doi.org/10.1115/OMAE2011-49120

Abstract

View Articletitled, The Effect of the Seabed Proximity on the Hydrodynamic Forces of the Piggyback Pipeline Under Wave Action

PDF

Topics: Fluid-dynamic forces , Pipelines , Seabed , Waves

A Three-Dimensional Curved Beam Element for Helical Components Modeling

Rodrigo Provasi, Clo´vis de Arruda Martins

OMAE 2011; 101-109https://doi.org/10.1115/OMAE2011-49133

Abstract

View Articletitled, A Three-Dimensional Curved Beam Element for Helical Components Modeling

PDF

Topics: Cables , Finite element analysis , Modeling , Pipeline risers , Pipes , Risers (Casting) , Shear (Mechanics) , Bridges (Structures) , Finite element model , Friction

Multiaxial Fatigue Analysis on Reeled Steel Tube Umbilical

Qingquan Li, Hezhen Yang, Huajun Li

OMAE 2011; 111-119https://doi.org/10.1115/OMAE2011-49147

Abstract

View Articletitled, Multiaxial Fatigue Analysis on Reeled Steel Tube Umbilical

PDF

Topics: Fatigue analysis , Steel , Cable reels , Finite element analysis , Stress , Fatigue , Fatigue life , Geometry , Materials properties , Modeling

Multiobjective Optimization for Dynamic Umbilical Installation Using Non-Dominated Sorting Genetic Algorithm

Aijun Wang, Hezhen Yang, Huajun Li

OMAE 2011; 121-129https://doi.org/10.1115/OMAE2011-49148

Abstract

View Articletitled, Multiobjective Optimization for Dynamic Umbilical Installation Using Non-Dominated Sorting Genetic Algorithm

PDF

Topics: Genetic algorithms , Pareto optimization , Optimization , Approximation , Buoyancy , Design , Dynamic analysis

Tangguh LNG Project Statistical Young’s Modulus and Thermal Expansion Coefficient Testing of Clad Pipe Specimens

Terry Griffiths, Isabel Hadley, Richard Johnson, Fabio Micari

OMAE 2011; 131-137https://doi.org/10.1115/OMAE2011-49150

Abstract

View Articletitled, Tangguh LNG Project Statistical Young’s Modulus and Thermal Expansion Coefficient Testing of Clad Pipe Specimens

PDF

Topics: Liquefied natural gas , Pipes , Testing , Thermal expansion , Young's modulus , Buckling , Event history analysis , Materials properties , Materials testing , Temperature

Development of a Full Scale Two Dimensional Pipeline Uplift Test Apparatus for Upheaval Buckling (UHB) Model Testing on the Tangguh LNG Project

Hayden Marcollo, Terry Griffiths, Richard Johnson, Tony Abbs

OMAE 2011; 139-147https://doi.org/10.1115/OMAE2011-49152

Abstract

View Articletitled, Development of a Full Scale Two Dimensional Pipeline Uplift Test Apparatus for Upheaval Buckling (UHB) Model Testing on the Tangguh LNG Project

PDF

Topics: Buckling , Liquefied natural gas , Pipelines , Testing , Pipes , Stress

Tangguh LNG Project Analysis of Full Scale Statistical Uplift Testing With Multiple Soil Layers

Terry Griffiths, Hayden Marcollo, Richard Johnson, Domenico Mariatmo

OMAE 2011; 149-157https://doi.org/10.1115/OMAE2011-49153

Abstract

View Articletitled, Tangguh LNG Project Analysis of Full Scale Statistical Uplift Testing With Multiple Soil Layers

PDF

Topics: Liquefied natural gas , Soil , Testing , Rocks , Reliability , Armor , Buckling , Event history analysis , Filters , Underwater pipelines

Structural Integrity Assessment of a Pipeline Subjected to an Underwater Explosion

Paolo Monti, Caterina Molinari, Massimiliano Bocciarelli, Alberto Corigliano, Stefano Mariani

OMAE 2011; 159-168https://doi.org/10.1115/OMAE2011-49178

Abstract

View Articletitled, Structural Integrity Assessment of a Pipeline Subjected to an Underwater Explosion

PDF

Topics: Explosions , Pipelines , Underwater pipelines , Warfare , Bombs , Bubbles , Gears , Hazards , Maintainability , Pipes

HAZ Toughness: Realistic Testing for Pipeline Integrity

Alexander U. Amadioha, Adam C. Bannister, Simon Slater, Martin Connelly

OMAE 2011; 169-179https://doi.org/10.1115/OMAE2011-49179

Abstract

View Articletitled, HAZ Toughness: Realistic Testing for Pipeline Integrity

PDF

Topics: Fracture toughness , Pipeline integrity , Testing , Welded joints , Fracture (Materials) , Stress , Tension , Brittleness , Fracture mechanics , Heat

Top Tension Riser Fatigue Monitoring System

G. Ross Frazer, Daniel Reagan, Wolfgang Ruf, Jun Cheng

OMAE 2011; 181-189https://doi.org/10.1115/OMAE2011-49181

Abstract

View Articletitled, Top Tension Riser Fatigue Monitoring System

PDF

Topics: Fatigue , Monitoring systems , Top-tensioned risers , Vessels , Design , Modeling , Pipeline risers , Risers (Casting) , Currents , Fatigue damage

Design Methodology for Axial Force Response of Pipe-in-Pipe: A Probabilistic Approach

Olav Fyrileiv, Mark Marley, Sune Pettersen

OMAE 2011; 191-198https://doi.org/10.1115/OMAE2011-49184

Abstract

View Articletitled, Design Methodology for Axial Force Response of Pipe-in-Pipe: A Probabilistic Approach

PDF

Topics: Design methodology , Pipes , Design , Heating , High pressure (Physics) , Coating processes , Coatings , Failure , Flow (Dynamics) , Fluids

Influence of Hysteresis on the Dynamics of Cryogenic LNG Composite Hoses

Niels Mallon, Gerard van der Weijde

OMAE 2011; 199-208https://doi.org/10.1115/OMAE2011-49188

Abstract

View Articletitled, Influence of Hysteresis on the Dynamics of Cryogenic LNG Composite Hoses

PDF

Topics: Composite materials , Dynamics (Mechanics) , Liquefied natural gas , Friction , Modeling , Internal friction , Steady state

Development of Method/Apparatus for Close-Visual Inspection of Underwater Structures (Especially Pipelines) in Muddy and Unclear Water Condition

Jasper A. Agbakwuru, Ove T. Gudmestad, John G. Groenli, Helge Skjaveland

OMAE 2011; 209-217https://doi.org/10.1115/OMAE2011-49248

Abstract

View Articletitled, Development of Method/Apparatus for Close-Visual Inspection of Underwater Structures (Especially Pipelines) in Muddy and Unclear Water Condition

PDF

Topics: Inspection , Laminar flow , Pipelines , Submerged structures , Water

On Dynamic Compression of Risers: An Analytical Expression for the Speed of Compression Waves

Rodrigo Mota Amarante, Marcos Mendes de Oliveira Pinto, Andre Luis Condino Fujarra

OMAE 2011; 219-227https://doi.org/10.1115/OMAE2011-49251

Abstract

View Articletitled, On Dynamic Compression of Risers: An Analytical Expression for the Speed of Compression Waves

PDF

Topics: Compression , Pipeline risers , Risers (Casting) , Waves

The Influence of the UOE-SAWL Forming Process on the Collapse Resistance of Deepwater Linepipe

Luciano O. Mantovano, Mohamed R. Chebaro, Hugo A. Ernst, Marcos de Souza, Chris M. Timms, Luis C. Chad

OMAE 2011; 229-237https://doi.org/10.1115/OMAE2011-49254

Abstract

View Articletitled, The Influence of the UOE-SAWL Forming Process on the Collapse Resistance of Deepwater Linepipe

PDF

Topics: Collapse , Pipes , American Petroleum Institute , Buckle propagation , Cycles , Deformation , Feedstock , Finite element analysis , Manufacturing , Ocean engineering

PSI Armour Wire for High Collapse Performance of Flexible Pipe

Laurent Paumier, Olivier Mesnage

OMAE 2011; 239-246https://doi.org/10.1115/OMAE2011-49257

Abstract

View Articletitled, PSI Armour Wire for High Collapse Performance of Flexible Pipe

PDF

Topics: Armor , Collapse , Pipes , Wire , Water , Pipeline risers , Risers (Casting) , Hydrostatics , Flexible risers , Pressure

Numerical Analysis Assessment of the Contact Pressure Between the Flexible Pipe Outer Sheath and the I Tube Interface Equipment for Wearing Research Program

Victor Nogueira, Fabio Pires, Fabio Aquino, Judimar Clevelario, Terry Sheldrake

OMAE 2011; 247-253https://doi.org/10.1115/OMAE2011-49267

Abstract

View Articletitled, Numerical Analysis Assessment of the Contact Pressure Between the Flexible Pipe Outer Sheath and the I Tube Interface Equipment for Wearing Research Program

PDF

Topics: Numerical analysis , Pipes , Pressure , Computer simulation , Calibration , Dimensions , Finite element analysis , Strain gages , Stress

Integrity of Mechanically Lined Pipes Subjected to Multi-Cycle Plastic Bending

Tomasz Tkaczyk, Aure´lien Pe´pin, Sylvain Denniel

OMAE 2011; 255-265https://doi.org/10.1115/OMAE2011-49270

Abstract

View Articletitled, Integrity of Mechanically Lined Pipes Subjected to Multi-Cycle Plastic Bending

PDF

Topics: Cycles , Pipes , Design , Stainless steel , Underwater pipelines , Cable reels , Carbon steel , Corrosion , Pipelines , Pressure

Potential Cost Savings in Wall Thickness Design of Ultra Deepwater Rigid Pipelines

Eduardo Oazen, Carlos Escudero, Fa´bio Azevedo, Leandro Basi´lio

OMAE 2011; 267-273https://doi.org/10.1115/OMAE2011-49276

Abstract

View Articletitled, Potential Cost Savings in Wall Thickness Design of Ultra Deepwater Rigid Pipelines

PDF

Topics: Design , Pipelines , Wall thickness , Manufacturing , Water

Collapse of Reinforced Thermoplastic Pipe (RTP) Under External Pressure

Yong Bai, Nuosi Wang, Peng Cheng, Binbin Yu, Mohd Fauzi Badaruddin, Mohd Ashri

OMAE 2011; 275-280https://doi.org/10.1115/OMAE2011-49324

Abstract

View Articletitled, Collapse of Reinforced Thermoplastic Pipe (RTP) Under External Pressure

PDF

Topics: Collapse , External pressure , Pipes , Pressure , Finite element analysis , Mathematical analysis , Stiffness , Design , Anisotropy , Corrosion

Burst Capacity of Reinforced Thermoplastic Pipe (RTP) Under Internal Pressure

Yong Bai, Fan Xu, Peng Cheng, Mohd Fauzi Badaruddin, Mohd Ashri

OMAE 2011; 281-288https://doi.org/10.1115/OMAE2011-49325

Abstract

View Articletitled, Burst Capacity of Reinforced Thermoplastic Pipe (RTP) Under Internal Pressure

PDF

Topics: Pipes , Pressure , Finite element analysis , Anisotropy , Mathematical analysis , Corrosion , Elasticity , Failure , Fibers , Fluids

On Lateral Buckling Failure of Armour Wires in Flexible Pipes

Niels H. O̸stergaard, Anders Lyckegaard, Jens H. Andreasen

OMAE 2011; 289-298https://doi.org/10.1115/OMAE2011-49358

Abstract

View Articletitled, On Lateral Buckling Failure of Armour Wires in Flexible Pipes

PDF

Topics: Armor , Buckling , Failure , Pipes , Wire , Equilibrium (Physics) , Deflection , Failure mechanisms , Geometry

On the Dynamic Collapse of Cylindrical Shells Under Hydrostatic and Impulsive Pressure Loadings: Experimental and Numerical Analysis

L. Loureiro Silva, T. A. Netto

OMAE 2011; 299-306https://doi.org/10.1115/OMAE2011-49361

Abstract

View Articletitled, On the Dynamic Collapse of Cylindrical Shells Under Hydrostatic and Impulsive Pressure Loadings: Experimental and Numerical Analysis

PDF

Topics: Collapse , Hydrostatics , Numerical analysis , Pipes , Pressure , Explosions , Explosives , Fluids , Accounting , Acoustics

Synthesis and Optimization of Submarine Pipeline Routes Considering On-Bottom Stability Criteria

Mauro Henrique Alves de Lima, Jr., Juliana Souza Baioco, Carl Horst Albrecht, Beatriz Souza Leite Pires de Lima, Breno Pinheiro Jacob, Djalene Maria Rocha, Carlos de Oliveira Cardoso

OMAE 2011; 307-318https://doi.org/10.1115/OMAE2011-49373

Abstract

View Articletitled, Synthesis and Optimization of Submarine Pipeline Routes Considering On-Bottom Stability Criteria

PDF

Topics: Optimization , Stability , Underwater pipelines , Design , Evolutionary algorithms , Geometry , Hydrostatics , Pipelines , Pipes

Test Set-Up for Irregular Vertical Hydraulic Transport in Deep Ocean Mining

Arno M. Talmon, Cees van Rhee

OMAE 2011; 319-328https://doi.org/10.1115/OMAE2011-49375

Abstract

View Articletitled, Test Set-Up for Irregular Vertical Hydraulic Transport in Deep Ocean Mining

PDF

Topics: Density , Disasters , Engineering prototypes , Flow (Dynamics) , Flow simulation , Hoists , Minerals , Mining , Oceans , Offshore mining

Pipeline On-Bottom Stability Analysis Based on FEM Model

Yong Bai, Zhimeng Yu

OMAE 2011; 329-333https://doi.org/10.1115/OMAE2011-49384

Abstract

View Articletitled, Pipeline On-Bottom Stability Analysis Based on FEM Model

PDF

Topics: Finite element methods , Finite element model , Pipelines , Stability

On-Board Monitoring, Analysis and Decision Support During Offshore Pipe Lay Operation

Joakim Taby, Ole David O̸kland, Egil Giertsen, Naiquan Ye, Melvyn Morgan, Ole Magnus Holden

OMAE 2011; 335-341https://doi.org/10.1115/OMAE2011-49386

Abstract

View Articletitled, On-Board Monitoring, Analysis and Decision Support During Offshore Pipe Lay Operation

PDF

Topics: Arches , Data collection , Finite element analysis , Monitoring systems , North Sea , Pipes , Satellites , Shapes , Stability , Storage

Reliability Based Assessment of Minimum Wall Thickness for Reeling: A Focus on Cold Worked Pipe

Daniel Smith, Tomasz Tkaczyk, Sylvain Denniel

OMAE 2011; 343-351https://doi.org/10.1115/OMAE2011-49389

Abstract

View Articletitled, Reliability Based Assessment of Minimum Wall Thickness for Reeling: A Focus on Cold Worked Pipe

PDF

Topics: Pipes , Reliability , Wall thickness , Work hardening , Deformation , Yield strength , Cable reels , Design , Dimensions , Geometry

Influence of Bore Pressure on the Creep Behaviour of Polymer Barrier Layer Inside an Unbonded Flexible Pipe

Yijun Shen, Jian Zhao, Zhimin Tan, Terry Sheldrake

OMAE 2011; 353-359https://doi.org/10.1115/OMAE2011-49392

Abstract

View Articletitled, Influence of Bore Pressure on the Creep Behaviour of Polymer Barrier Layer Inside an Unbonded Flexible Pipe

PDF

Topics: Creep , Pipes , Polymers , Pressure , Temperature , Deformation , Design , Finite element analysis , Finite element model , Hardening

Flowlines and Risers Pipes Ends Laser Measurement for Enhanced Girth Welds Manufacturing and Fatigue Behavior

Lorenzo Motta, Paolo Novelli, Philippe Darcis, Mariano Armengol, Federico Tintori

OMAE 2011; 361-366https://doi.org/10.1115/OMAE2011-49400

Abstract

View Articletitled, Flowlines and Risers Pipes Ends Laser Measurement for Enhanced Girth Welds Manufacturing and Fatigue Behavior

PDF

Topics: Fatigue , Lasers , Manufacturing , Pipeline risers , Pipes , Risers (Casting) , Welded joints

Limit State Design Based on Experimental Methods for High Pressure, High Temperature Riser and Pipeline Design

Roy Shilling, Chris Alexander, Ron Livesay

OMAE 2011; 367-379https://doi.org/10.1115/OMAE2011-49424

Abstract

View Articletitled, Limit State Design Based on Experimental Methods for High Pressure, High Temperature Riser and Pipeline Design

PDF

Topics: Design , Experimental methods , High pressure (Physics) , High temperature , Pipeline risers , Piping design , Risers (Casting) , American Petroleum Institute , Design methodology , Pipes

Assessing the Use of Composite Materials in Reinforcing Offshore Risers and Pipelines

Chris Alexander

OMAE 2011; 381-390https://doi.org/10.1115/OMAE2011-49425

Abstract

View Articletitled, Assessing the Use of Composite Materials in Reinforcing Offshore Risers and Pipelines

PDF

Topics: Composite materials , Ocean engineering , Pipeline risers , Pipelines , Risers (Casting) , Maintenance , Stress , Pressure , Tension , Underwater pipelines

Inline and Vertical Wave Force Variation due to Burial of Submarine Pipeline in Random Wave Fields

S. Neelamani, K. Al-Banaa

OMAE 2011; 391-399https://doi.org/10.1115/OMAE2011-49431

Abstract

View Articletitled, Inline and Vertical Wave Force Variation due to Burial of Submarine Pipeline in Random Wave Fields

PDF

Topics: Underwater pipelines , Wave forces , Waves , Soil , Pipelines , Seabed , Cohesion , Design , Engineers , Fluid-dynamic forces

Mechanical Behaviour of Lined Pipe During Bending: Numerical and Experimental Results Compared

A. Hilberink, A. M. Gresnigt, L. J. Sluys

OMAE 2011; 401-412https://doi.org/10.1115/OMAE2011-49434

Abstract

View Articletitled, Mechanical Behaviour of Lined Pipe During Bending: Numerical and Experimental Results Compared

PDF

Topics: Mechanical behavior , Pipes , Alloys , Carbon steel , Corrosion , Bearings , Design , Friction , Pipelines , Stress

Susceptibility to Lateral Buckling: What Hobbs Equations for What Flowlines

Yann Le Maouˆt, Philippe Brunet

OMAE 2011; 413-420https://doi.org/10.1115/OMAE2011-49442

Abstract

View Articletitled, Susceptibility to Lateral Buckling: What Hobbs Equations for What Flowlines

PDF

Topics: Buckling , Pipes , Breakwaters , Shapes

Lateral Buckling of Armor Wires in Flexible Pipes: Reaching 3000m Water Depth

Philippe Secher, Fabrice Bectarte, Antoine Felix-Henry

OMAE 2011; 421-428https://doi.org/10.1115/OMAE2011-49447

Abstract

View Articletitled, Lateral Buckling of Armor Wires in Flexible Pipes: Reaching 3000m Water Depth

PDF

Topics: Armor , Buckling , Pipes , Water , Wire , Design , Hyperbaric chambers , Collapse , Deepwater development , External pressure

Mechanical Behavior of Buried Steel Pipelines Crossing Strike-Slip Seismic Faults

Polynikis Vazouras, Spyros A. Karamanos, Panos Dakoulas

OMAE 2011; 429-438https://doi.org/10.1115/OMAE2011-49455

Abstract

View Articletitled, Mechanical Behavior of Buried Steel Pipelines Crossing Strike-Slip Seismic Faults

PDF

Topics: Mechanical behavior , Pipelines , Steel , Pipes , Soil , Displacement , Failure , American Petroleum Institute , Buckling , Deformation

Consistent VIV Fatigue Analysis Methodology of Umbilicals

Nils So̸dahl, Oddrun Steinkjer, Elisabeth Gjo̸lmesli, Kay Hansen-Zahl

OMAE 2011; 439-447https://doi.org/10.1115/OMAE2011-49459

Abstract

View Articletitled, Consistent VIV Fatigue Analysis Methodology of Umbilicals

PDF

Topics: Fatigue analysis , Vortex-induced vibration , Damping , Fatigue life , Mechanical properties , Stick-slip , Computer software , Design , Fatigue , Fatigue damage

Bend Stiffener Design for Umbilicals

Nils So̸dahl, Torfinn Ottesen

OMAE 2011; 449-460https://doi.org/10.1115/OMAE2011-49461

Abstract

View Articletitled, Bend Stiffener Design for Umbilicals

PDF

Topics: Design , Stress , Optimization , Tension , Fatigue , Accounting , Computer software , Finite element analysis , Geometry , Manufacturing

Dynamics of the Vertical Hydraulic Transport System for Deep Sea Mining

Stanislav Verichev, Andrei Metrikine, Robert Plat, Hayo Hendrikse

OMAE 2011; 461-468https://doi.org/10.1115/OMAE2011-49464

Abstract

View Articletitled, Dynamics of the Vertical Hydraulic Transport System for Deep Sea Mining

PDF

Topics: Dynamics (Mechanics) , Mining , Seas , Pipes , Slurries , Design , Excitation , Flow (Dynamics) , Minerals , Ocean engineering

Buckling of Clad Pipes Under Bending and External Pressure

Daniel Vasilikis, Spyros A. Karamanos

OMAE 2011; 469-478https://doi.org/10.1115/OMAE2011-49470

Abstract

View Articletitled, Buckling of Clad Pipes Under Bending and External Pressure

PDF

Topics: Buckling , External pressure , Pipes , Manufacturing , Accounting , Carbon steel , Corrosion , Deformation , Finite element analysis , Stress

COOL™ Hose Qualification Process of the First EN1474-2 LNG Floating Hose

Jean Pierre F. Queau, Giorgio E. Torre

OMAE 2011; 479-486https://doi.org/10.1115/OMAE2011-49481

Abstract

View Articletitled, COOL™ Hose Qualification Process of the First EN1474-2 LNG Floating Hose

PDF

Topics: Liquefied natural gas , Ocean engineering , Design , Fitness-for-service , Product design , Testing , Vessels

Upheaval Buckling Analysis of Partially Buried Pipeline Subjected to High Pressure and High Temperature

Jason Sun, Han Shi, Paul Jukes

OMAE 2011; 487-494https://doi.org/10.1115/OMAE2011-49498

Abstract

View Articletitled, Upheaval Buckling Analysis of Partially Buried Pipeline Subjected to High Pressure and High Temperature

PDF

Topics: Buckling , High pressure (Physics) , High temperature , Pipelines , Pipes , Thermal expansion

An Experimental Analysis of a Flexible Riser in Jumper Configuration

Motohiko Murai, Marcio Yamamoto, Shotaro Uto, Tomo Fujiwara

OMAE 2011; 495-502https://doi.org/10.1115/OMAE2011-49506

Abstract

View Articletitled, An Experimental Analysis of a Flexible Riser in Jumper Configuration

PDF

Topics: Experimental analysis , Flexible risers , Degrees of freedom , Pipeline risers , Pipes , Risers (Casting) , Seas , Accelerometers , Buoys , Computer simulation

Crushing of Flexible Pipes Under Traction: A Theoretical-Experimental Assessment

Guilherme R. Franzini, Celso P. Pesce, Fernanda C. M. Takafuji, Rodolfo T. Gonc¸alves, Rafael Tanaka, Marcelo Silva, Teo´filo Barbosa, Carlos A. Godinho

OMAE 2011; 503-512https://doi.org/10.1115/OMAE2011-49524

Abstract

View Articletitled, Crushing of Flexible Pipes Under Traction: A Theoretical-Experimental Assessment

PDF

Topics: Pipes , Traction

Collapse Capacity of UOE Deepwater Linepipe

Olav Aamlid, Leif Collberg, Simon Slater

OMAE 2011; 513-524https://doi.org/10.1115/OMAE2011-49570

Abstract

View Articletitled, Collapse Capacity of UOE Deepwater Linepipe

PDF

Topics: Collapse , Manufacturing , Pipelines

Qualification of Enhanced Collapse Capacity UOE Deepwater Linepipe

Simon Slater, Robin Devine, Olav Aamlid, David Hernandez, Doug Swanek

OMAE 2011; 525-534https://doi.org/10.1115/OMAE2011-49571

Abstract

View Articletitled, Qualification of Enhanced Collapse Capacity UOE Deepwater Linepipe

PDF

Topics: Collapse , Pipes , Manufacturing , Quality control , Compression , Buckling , Design , Heat treating (Metalworking) , Compressive strength , External pressure

Characterisation of Slug Flow Conditions in Pipelines for Fatigue Analysis

Ahmed M. Reda, Gareth L. Forbes, Ibrahim A. Sultan

OMAE 2011; 535-547https://doi.org/10.1115/OMAE2011-49583

Abstract

View Articletitled, Characterisation of Slug Flow Conditions in Pipelines for Fatigue Analysis

PDF

Topics: Fatigue analysis , Pipelines , Slug flows , Fatigue , Arches , Design , Dynamic analysis , Engineers , Fatigue damage , Finite element analysis

Rayleigh Damping Effects on Global Analysis of Umbilicals

Lauro Massao Yamada da Silveira, Rafael Loureiro Tanaka, Joa˜o Paulo Zi´lio Novaes

OMAE 2011; 549-559https://doi.org/10.1115/OMAE2011-49584

Abstract

View Articletitled, Rayleigh Damping Effects on Global Analysis of Umbilicals

PDF

Topics: Damping , Stress , Tension , Design , Elongation , Ocean engineering , Stiffness , Waves , Drag (Fluid dynamics) , Dynamics (Mechanics)

Dynamic Simulation of Free-Spanning Pipeline Trawl Board Pull-Over

Vegard Longva, Svein Sævik, Erik Levold, Ha˚var Ilstad, Per Teigen

OMAE 2011; 561-568https://doi.org/10.1115/OMAE2011-49592

Abstract

View Articletitled, Dynamic Simulation of Free-Spanning Pipeline Trawl Board Pull-Over

PDF

Topics: Free spanning pipelines , Simulation , Seabed , Stress , Drag (Fluid dynamics) , Computer simulation , Finite element analysis , Pipelines , Potential theory (Physics) , Simulation models

Free Standing Hybrid Riser Global Parametric Sensitivity Analysis and Optimum Design

Wei Qin, Zhuang Kang, Youwei Kang

OMAE 2011; 569-575https://doi.org/10.1115/OMAE2011-49606

Abstract

View Articletitled, Free Standing Hybrid Riser Global Parametric Sensitivity Analysis and Optimum Design

PDF

Topics: Design , Hybrid risers , Sensitivity analysis , Pipes , American Petroleum Institute , Finite element analysis , Flow (Dynamics) , Gulf of Mexico , Ocean engineering , Optimization

Towards an H₂S Free Environment in Flexible Pipe Annulus Thanks to a New Anti-H₂S Polymer Layer

Thomas Epsztein, Frederic Demanze, Xavier Lefebvre, Jacques Jarrin

OMAE 2011; 577-582https://doi.org/10.1115/OMAE2011-49664

Abstract

View Articletitled, Towards an H2S Free Environment in Flexible Pipe Annulus Thanks to a New Anti-H2S Polymer Layer

PDF

Topics: Annulus , Pipes , Polymers , Steel , Fluids , Weight (Mass) , Design , Tension , Water , Carbon dioxide

Advanced Numerical Simulation to Meet Design Challenges of XHPHT Metallurgically Clad PIP Platform Riser

Tao Zhao, Dan Lee, Kasra Farahani, Philip Cooper

OMAE 2011; 583-589https://doi.org/10.1115/OMAE2011-49679

Abstract

View Articletitled, Advanced Numerical Simulation to Meet Design Challenges of XHPHT Metallurgically Clad PIP Platform Riser

PDF

Topics: Computer simulation , Design , Pipeline risers , Risers (Casting) , Pipes , Finite element analysis , Breakwaters , Stress , Alloys , Buckling

On Vortex Induced Vibration in Two-Degree-of-Freedoms of Flexible Cylinders

Weiping Huang, Weihong Yu

OMAE 2011; 591-596https://doi.org/10.1115/OMAE2011-49698

Abstract

View Articletitled, On Vortex Induced Vibration in Two-Degree-of-Freedoms of Flexible Cylinders

PDF

Topics: Cylinders , Vortex-induced vibration , Locks (Waterways) , Vibration , Cross-flow , Fatigue damage , Fluid structure interaction , Fluids , Reynolds number , Vortex shedding

Detailed Contact Analysis of the J-Tube Riser Pull-In Method

Farzad Farid-Afshin, Christian Reva, Erlend R. Vistnes

OMAE 2011; 597-605https://doi.org/10.1115/OMAE2011-49702

Abstract

View Articletitled, Detailed Contact Analysis of the J-Tube Riser Pull-In Method

PDF

Topics: Pipeline risers , Risers (Casting) , Finite element analysis , Friction , Constitutive equations , Stress , Tension , Boundary-value problems , Clearances (Engineering) , Computer simulation

Ratcheting, Wrinkling and Collapse of Tubes Induced by Axial Cycling Under Internal Pressure

Rong Jiao, Stelios Kyriakides

OMAE 2011; 607-616https://doi.org/10.1115/OMAE2011-49706

Abstract

View Articletitled, Ratcheting, Wrinkling and Collapse of Tubes Induced by Axial Cycling Under Internal Pressure

PDF

Topics: Collapse , Pressure , Cycles , Stress , Deformation , Pipes , Diluents , Engineering simulation , Failure , Hardening

Ultra Heavy Wall Linepipe X65: Double Joint Girth Weld Performances for Severe Applications

Luigi Di Vito, Gianluca Mannucci, Roberto Morana, Antonio Lucci, Federico Tintori, Stefano Crippa, Mariano Armengol, Noe´ Mota, Mauricio Pelcastre, Eduardo Ruiz, He´ctor Quintanilla, Philippe Darcis

OMAE 2011; 617-626https://doi.org/10.1115/OMAE2011-49715

Abstract

View Articletitled, Ultra Heavy Wall Linepipe X65: Double Joint Girth Weld Performances for Severe Applications

PDF

Topics: Arc welding , Design , Fluctuations (Physics) , Performance , Pipes , Pressure pipes , Stress corrosion cracking , Temperature , Testing , Welded joints

Riser Management System Performance in Ultra-Deep Water With Rapidly Changing Current

Gerhard Gundersen, Gullik A. Jensen

OMAE 2011; 627-635https://doi.org/10.1115/OMAE2011-49726

Abstract

View Articletitled, Riser Management System Performance in Ultra-Deep Water With Rapidly Changing Current

PDF

Topics: Pipeline risers , Water , Currents , Risers (Casting) , Top-tensioned risers , Deflection , Eddies (Fluid dynamics) , Ocean currents , Safety , Stress

Novel Design of Small Diameter Pipelines on Uneven Seabed

Frode Hove, Tore H. So̸reide, Anne Cecilie Nordsve, Sigurd D. Trier

OMAE 2011; 637-642https://doi.org/10.1115/OMAE2011-49734

Abstract

View Articletitled, Novel Design of Small Diameter Pipelines on Uneven Seabed

PDF

Topics: Design , Pipelines , Seabed , Rocks , Arches , Stress , Fracture (Materials) , Buckling , Cycles , Displacement

Quick Connection Couplings in the Permeated Gas Relief Systems of Flexible Riser End Fittings

Alexandre S. Rabelo, Antonio M. R. Motta, Antonio P. G. Romero, Joa˜o Paulo C. e S. Nunes, Jose´ A. P. Padilha, Marcelo Brack

OMAE 2011; 643-649https://doi.org/10.1115/OMAE2011-49745

Abstract

View Articletitled, Quick Connection Couplings in the Permeated Gas Relief Systems of Flexible Riser End Fittings

PDF

Topics: Couplings , Fittings , Flexible risers , Relief valves , Annulus , Fluids , Pipeline risers , Risers (Casting) , Testing , Vacuum

Simple Numerical Models for Pipeline Walking Accounting for Mitigation and Complex Soil Response

Daniel Carneiro, David Murphy

OMAE 2011; 651-656https://doi.org/10.1115/OMAE2011-49780

Abstract

View Articletitled, Simple Numerical Models for Pipeline Walking Accounting for Mitigation and Complex Soil Response

PDF

Topics: Accounting , Computer simulation , Pipelines , Soil , Pipes , Temperature , Cycles , Displacement , Finite element model , Ocean engineering

Qualification of Reeled Clad SCR Weld Fatigue Performance

Howard Wang, Troy Widener, Wan Kan, Jim Sutherland, Richard Jones

OMAE 2011; 657-668https://doi.org/10.1115/OMAE2011-49798

Abstract

View Articletitled, Qualification of Reeled Clad SCR Weld Fatigue Performance

PDF

Topics: Fatigue

Damage Detection in Offshore Free Span Pipelines Using Wavelet Packet Transform

Sajad Shahverdi, Mohammad Ali Lotfollahi-Yaghin, Mohammad Hossein Aminfar, Ramin Valizadeh

OMAE 2011; 669-678https://doi.org/10.1115/OMAE2011-49803

Abstract

View Articletitled, Damage Detection in Offshore Free Span Pipelines Using Wavelet Packet Transform

PDF

Topics: Damage , Free spanning pipelines , Ocean engineering , Wavelets , Signals , Fourier transforms , Mode shapes , Offshore structures , Service life (Equipment) , Structural failures

Advanced Analysis and Design Tools for Offshore Pipeline in Operation

Lorenzo Bartolini, Cristian Crea, Lorenzo Marchionni, Maurizio Spinazze`, Luigino Vitali

OMAE 2011; 679-691https://doi.org/10.1115/OMAE2011-49831

Abstract

View Articletitled, Advanced Analysis and Design Tools for Offshore Pipeline in Operation

PDF

Topics: Design , Finite element model , Underwater pipelines

Offshore Pipeline Installation: 3-Dimensional Finite Element Modelling

Lorenzo Marchionni, Lombardi Alessandro, Luigino Vitali

OMAE 2011; 693-702https://doi.org/10.1115/OMAE2011-49832

Abstract

View Articletitled, Offshore Pipeline Installation: 3-Dimensional Finite Element Modelling

PDF

Topics: Finite element analysis , Finite element model , Modeling , Underwater pipelines

Alternative Method of Buoy Supporting Riser (BSR) Installation

Ricardo Franciss, Enrique Casaprima Gonzales, Jose´ Carlos Lima de Almeida, Jairo Bastos de Arau´jo, Antonio Carlos Fernandes

OMAE 2011; 703-709https://doi.org/10.1115/OMAE2011-49862

Abstract

View Articletitled, Alternative Method of Buoy Supporting Riser (BSR) Installation

PDF

Topics: Buoys , Pipeline risers , Risers (Casting)

Riser Analysis of a New Dry Completion Concept for a Monocolumn Platform

Fernando Jorge Mendes de Sousa, Marcos Queija de Siqueira, Claudio Marcio Silva Dantas, Lui´s Volnei Sudati Sagrilo, Isai´as Quaresma Masetti

OMAE 2011; 711-720https://doi.org/10.1115/OMAE2011-49864

Abstract

View Articletitled, Riser Analysis of a New Dry Completion Concept for a Monocolumn Platform

PDF

Topics: Pipeline risers , Risers (Casting) , Gulf of Mexico , Floating bodies , Oil fields , Water

On the Propagation Buckling and Effects in Ultra-Long Deep Subsea Pipelines

Hossein Khalilpasha, Faris Albermani

OMAE 2011; 721-726https://doi.org/10.1115/OMAE2011-49879

Abstract

View Articletitled, On the Propagation Buckling and Effects in Ultra-Long Deep Subsea Pipelines

PDF

Topics: Buckling , Underwater pipelines , Buckle propagation , Aluminum , Pipelines , Pipes , Pressure

Comparison of Different Approaches for Fatigue Damage Accumulation in Steel Risers

Fernanda C. M. Takafuji, Clo´vis A. Martins

OMAE 2011; 727-735https://doi.org/10.1115/OMAE2011-49888

Abstract

View Articletitled, Comparison of Different Approaches for Fatigue Damage Accumulation in Steel Risers

PDF

Topics: Fatigue damage , Pipeline risers , Risers (Casting) , Steel , Stress , Fatigue , Fatigue life , Damage , Dynamic analysis , Failure

Burst Capacity Estimation of Pipeline With Colonies of Interacting Corrosion Defects

Xin Li, Yanfei Chen, Chenliang Su

OMAE 2011; 737-745https://doi.org/10.1115/OMAE2011-49918

Abstract

View Articletitled, Burst Capacity Estimation of Pipeline With Colonies of Interacting Corrosion Defects

PDF

Topics: Corrosion , Pipelines , Pipes , Finite element methods , Pressure , Steel

Parametric Study on the Axial Vibrations of Riser Suspended and Moored by Chains (RSAA) Configurations

Claudio Marcio Silva Dantas, Marcos Queija de Siqueira, Victor Milanez da Silva Pereira, Fernando Jorge Mendes de Sousa, Gilberto Bruno Ellwanger, Isai´as Quaresma Masetti

OMAE 2011; 747-758https://doi.org/10.1115/OMAE2011-49932

Abstract

View Articletitled, Parametric Study on the Axial Vibrations of Riser Suspended and Moored by Chains (RSAA) Configurations

PDF

Topics: Chain , Mooring , Pipeline risers , Risers (Casting) , Vibration , Stress , Flexible structures , Tension , Analytical methods , Design

Pipeline Shore Approach Design: Case Study

Scott Y. McMaster, Dean R. Campbell, Eric Jas

OMAE 2011; 759-768https://doi.org/10.1115/OMAE2011-49937

Abstract

View Articletitled, Pipeline Shore Approach Design: Case Study

PDF

Topics: Design , Pipelines , Engineering design processes , High pressure (Physics) , Dredging , Gates (Closures) , Liquefied natural gas , Ocean engineering , Preservation , Shorelines

Mechanical Qualification of Dynamic Deep Water Power Cable

Roger Slora, Stian Karlsen, Per Arne Osborg

OMAE 2011; 769-776https://doi.org/10.1115/OMAE2011-49945

Abstract

View Articletitled, Mechanical Qualification of Dynamic Deep Water Power Cable

PDF

Topics: Cables , Hydropower , Water , Engineering prototypes , Ocean engineering , Failure mechanisms , Stress , Compressors , Electric power transmission , Electricity (Physics)

Global Buckling of Pipe-in-Pipe: Structural Response and Design Criteria

Stig Goplen, Olav Fyrileiv, Jon Petter Grandal, Lars Bo̸rsheim

OMAE 2011; 777-784https://doi.org/10.1115/OMAE2011-49960

Abstract

View Articletitled, Global Buckling of Pipe-in-Pipe: Structural Response and Design Criteria

PDF

Topics: Buckling , Design , Pipes , Pipelines , Stress , Temperature , Breakwaters , Friction , Pressure , Arches

Model Tests of Pipe-Laying Vessel: Results and Analysis

Alevtina N. Kulikova, Victor G. Platonov, Sandro Foce

OMAE 2011; 785-792https://doi.org/10.1115/OMAE2011-49967

Abstract

View Articletitled, Model Tests of Pipe-Laying Vessel: Results and Analysis

PDF

Topics: Pipes , Vessels , Modeling , Mooring , Waves , Center of mass , Kinematics , Pipelines , Rollers , Seas

Engineering Critical Assessment of Embedded Flaws in a Pipeline Using a Probabilistic Approach: A Case Study

Daowu Zhou, Ali Mirzaee-Sisan

OMAE 2011; 793-797https://doi.org/10.1115/OMAE2011-49996

Abstract

View Articletitled, Engineering Critical Assessment of Embedded Flaws in a Pipeline Using a Probabilistic Approach: A Case Study

PDF

Topics: Pipelines , Finite element analysis , Failure , Reliability , Probability , Response surface methodology

Integrated Analysis of Mooring and Riser Systems for FPSO’s in Harsh Shallow Water Environments

M. Martens, J. R. Whelan, Y. Drobyshevski

OMAE 2011; 799-809https://doi.org/10.1115/OMAE2011-50007

Abstract

View Articletitled, Integrated Analysis of Mooring and Riser Systems for FPSO’s in Harsh Shallow Water Environments

PDF

Topics: Mooring , Pipeline risers , Risers (Casting) , Water , Design , FPSO , Engineering simulation , Seas , Simulation , Storms

Innovative Supports of Risers and Corresponding Installation Procedures

Daniel Saito, Leticia R. S. Cordeiro, Felipe A. Castro, Cipriano J. Medeiros, Jr., Glauco D. Ribeiro

OMAE 2011; 811-816https://doi.org/10.1115/OMAE2011-50011

Abstract

View Articletitled, Innovative Supports of Risers and Corresponding Installation Procedures

PDF

Topics: Pipeline risers , Risers (Casting) , Water , Waves , Construction , Flexible risers , Reliability , Stress , Buoys , FPSO

Probabilistic Model Application in the Integrated Stability Analysis of Offshore On-Bottom Pipeline

Bassem S. Youssef, Mark J. Cassidy, Yinghui Tian

OMAE 2011; 817-828https://doi.org/10.1115/OMAE2011-50047

Abstract

View Articletitled, Probabilistic Model Application in the Integrated Stability Analysis of Offshore On-Bottom Pipeline

PDF

Topics: Ocean engineering , Pipelines , Stability , Pipes , Stress , Soil , Underwater pipelines , Design , Modeling , Probability

Vibration Reduction in Steel Catenary Risers by the Use of Viscoelastic Materials

Fla´via Borges, Ney Roitman, Carlos Magluta, Daniel A. Castello, Ricardo Franciss

OMAE 2011; 829-838https://doi.org/10.1115/OMAE2011-50052

Abstract

View Articletitled, Vibration Reduction in Steel Catenary Risers by the Use of Viscoelastic Materials

PDF

Topics: Steel catenary risers , Vibration , Viscoelastic materials , Damping , Pipeline risers , Risers (Casting) , Sandwich structures , Stress , Computer simulation , Currents

Pipeline Embedment Prediction Using As-Laid Data

John Oliphant, Gi Jae Yun

OMAE 2011; 839-845https://doi.org/10.1115/OMAE2011-50095

Abstract

View Articletitled, Pipeline Embedment Prediction Using As-Laid Data

PDF

Topics: Pipelines , Pipes , Dynamics (Mechanics) , Sediments , Stress , Stress concentration , Water

On the Structural Response of a Flexible Pipe With Damaged Tensile Armor Wires

Jose´ Renato M. de Sousa, George C. Campello, Antoˆnio Fernando B. Bueno, Eduardo Vardaro, Gilberto B. Ellwanger, Telmo R. Strohaecker

OMAE 2011; 847-858https://doi.org/10.1115/OMAE2011-50113

Abstract

View Articletitled, On the Structural Response of a Flexible Pipe With Damaged Tensile Armor Wires

PDF

Topics: Armor , Pipes , Wire , Stress , Damage , Finite element model , Pressure , Rupture , Stiffness , Tension

Design Challenges of Top Tensioned Risers in Ultra Deepwater Applications

Yongming Cheng, Lixin Xu, Paul Stanton

OMAE 2011; 859-867https://doi.org/10.1115/OMAE2011-50127

Abstract

View Articletitled, Design Challenges of Top Tensioned Risers in Ultra Deepwater Applications

PDF

Topics: Deepwater development , Design , Top-tensioned risers , Pipeline risers , Risers (Casting) , Vortex-induced vibration , Drilling , High pressure (Physics) , High temperature , Manufacturing systems

Experimental Research on Damages Detection of Pipeline Structure by Using PZT-Based Waves

Shi Yan, Binbin He, Naizhi Zhao

OMAE 2011; 869-875https://doi.org/10.1115/OMAE2011-50131

Abstract

View Articletitled, Experimental Research on Damages Detection of Pipeline Structure by Using PZT-Based Waves

PDF

Topics: Damage , Pipelines , Waves , Structural health monitoring , Sensors , Signals , Smart materials , Actuators , Algorithms , Corrosion

Steel Catenary Riser Response Identification Based on Field Measurements

Yiannis Constantinides, Lee Tran, Prahlad Enuganti, Mike Campbell

OMAE 2011; 877-882https://doi.org/10.1115/OMAE2011-50148

Abstract

View Articletitled, Steel Catenary Riser Response Identification Based on Field Measurements

PDF

Topics: Steel catenary risers , Pipeline risers , Risers (Casting) , Design , Pipes , Soil , Storms , Vessels , Water

Comparison of SCR Field Response With Analytical Predictions

Yiannis Constantinides, Jen-hwa Chen, Lee Tran, Prahlad Enuganti, Mike Campbell

OMAE 2011; 883-888https://doi.org/10.1115/OMAE2011-50150

Abstract

View Articletitled, Comparison of SCR Field Response With Analytical Predictions

PDF

Topics: Design , Engineering standards , Finite element analysis , Gulf of Mexico , Hydrodynamics , Modeling , Pipeline risers , Risers (Casting) , Soil , Steel catenary risers

Estimating Long-Term Distributions of Extreme Response of a Catenary Riser

Elizabeth Passano, Philippe Mainc¸on

OMAE 2011; 889-895https://doi.org/10.1115/OMAE2011-50151

Abstract

View Articletitled, Estimating Long-Term Distributions of Extreme Response of a Catenary Riser

PDF

Topics: Pipeline risers , Risers (Casting) , Seas , Simulation , Electromagnetic scattering , Finite element analysis

Assessment of Lateral Buckles in a HP/HT Pipeline Using Sidescan Sonar Data

Alexandre Santos Hansen, Bruno Reis Antunes, Rafael Familiar Solano, Graeme Roberts, Arek Bedrossian

OMAE 2011; 897-904https://doi.org/10.1115/OMAE2011-50183

Abstract

View Articletitled, Assessment of Lateral Buckles in a HP/HT Pipeline Using Sidescan Sonar Data

PDF

Topics: Pipelines , Design , Buckling , Calibration , Finite element model , Heat , High pressure (Physics) , High temperature , Interpolation , Pipes

Integral Buckle Arrestors for Deepwater Rigid Pipelines Installed by Reeling Method

T. Sriskandarajah, Venu Rao, Soheil Manouchehri

OMAE 2011; 905-914https://doi.org/10.1115/OMAE2011-50184

Abstract

View Articletitled, Integral Buckle Arrestors for Deepwater Rigid Pipelines Installed by Reeling Method

PDF

Topics: Pipelines , Design , Buckle propagation , Pipes , Cable reels , Clamps (Tools) , Hydrostatic pressure , Manufacturing , Vessels , Wall thickness

Evaluation of the Operational Behaviour of a Deepwater Oil Export Pipeline Designed on the Basis of Controlled Lateral Buckling

T. Sriskandarajah, Arek Bedrossian, Graeme Roberts, Peter Tanscheit, Rafael F. Solano, Alexandre Hansen, Bruno R. Antunes

OMAE 2011; 915-923https://doi.org/10.1115/OMAE2011-50188

Abstract

View Articletitled, Evaluation of the Operational Behaviour of a Deepwater Oil Export Pipeline Designed on the Basis of Controlled Lateral Buckling

PDF

Topics: Buckling , Pipelines , Design , Finite element model , Buoyancy , Cable reels , Finite element analysis , Flow (Dynamics) , Ocean engineering , Operating temperature

Deepwater SCR Benchmarking Methodology

Songcheng Li, Lee Tran, Prahlad Enuganti, Mike Campbell, Yiannis Constantinides

OMAE 2011; 925-931https://doi.org/10.1115/OMAE2011-50195

Abstract

View Articletitled, Deepwater SCR Benchmarking Methodology

PDF

Topics: Calibration , Computer software , Databases , Design , Feedback , Gulf of Mexico , Pipeline risers , Risers (Casting) , Sensors , Spar platforms

Zap-Lok^® Connection Testing and Axial Strength Design

Pedro Vargas, Ben Crowder, David Roberts

OMAE 2011; 933-941https://doi.org/10.1115/OMAE2011-50209

Abstract

View Articletitled, Zap-Lok® Connection Testing and Axial Strength Design

PDF

Topics: Design , Testing , Joining , Pipes , Design methodology , Coating processes , Coatings , Cycles , Damage , Deformation

Multiple Axial Fatigue of Pressure Armors in Flexible Risers

Naiquan Ye, Svein Sævik

OMAE 2011; 943-950https://doi.org/10.1115/OMAE2011-50210

Abstract

View Articletitled, Multiple Axial Fatigue of Pressure Armors in Flexible Risers

PDF

Topics: Fatigue , Flexible risers , Pressure , Stress , Armor , Computer software , Design , External pressure , Fatigue analysis , Fatigue damage

The Span Mitigation Analysis With Use of Advanced FEA Modeling Techniques

James Wang, Ranil Banneyake, Shawn Huang, Paul Jukes, Ayman Eltaher

OMAE 2011; 951-957https://doi.org/10.1115/OMAE2011-50239

Abstract

View Articletitled, The Span Mitigation Analysis With Use of Advanced FEA Modeling Techniques

PDF

Topics: Arches , Finite element analysis , Modeling , Pipelines , Vortex-induced vibration , Fatigue , Pipeline integrity , Seabed , Buckling , Damage

First-Principles Finite Element Modeling of Coiled Tubing in Directional Wellbores

Lance T. Hill, Deepak V. Datye

OMAE 2011; 959-963https://doi.org/10.1115/OMAE2011-50299

Abstract

View Articletitled, First-Principles Finite Element Modeling of Coiled Tubing in Directional Wellbores

PDF

Topics: Finite element analysis , Modeling , Tubing , Buckling , Locks (Waterways) , Drills (Tools) , Pipes , Damage , Drilling , Engineering standards

All Years

Proceedings Papers

Pipeline and Riser Technology

Email alerts

Most Read Proceedings Papers in OMAE

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only