Skip Nav Destination
Proceedings Papers
In This Volume
Volume 3: Pipeline and Riser Technology
Pipeline and Riser Technology
Design of the Greater Plutonio Riser Tower
OMAE 2009; 1-9https://doi.org/10.1115/OMAE2009-79015
Topics:
Design
,
Pipeline risers
,
Risers (Casting)
,
Buoyancy
,
Fatigue analysis
,
Friction
,
Manifolds
,
Numerical analysis
,
Pipes
,
Underground injection
SAIPEM Novel Hybrid Riser: RCS
OMAE 2009; 23-34https://doi.org/10.1115/OMAE2009-79031
Topics:
Hybrid risers
,
Pipeline risers
,
Risers (Casting)
,
Vessels
,
Water
,
Mooring
,
Risk
,
Construction
,
Dampers
,
Design
Finite Element Analysis of Strain Concentration in Field Joint of Concrete Coated Pipelines
OMAE 2009; 35-40https://doi.org/10.1115/OMAE2009-79047
Topics:
Concretes
,
Finite element analysis
,
Pipelines
,
Concrete coatings
,
Corrosion protection
,
Finite element model
,
Modeling
,
Shear stress
,
Steel
,
Coating processes
The Effect of Soil Non-Linearity on VIV Response of a Free Spanning Pipeline
OMAE 2009; 49-54https://doi.org/10.1115/OMAE2009-79063
Topics:
Free spanning pipelines
,
Soil
,
Vortex-induced vibration
,
Seabed
,
Springs
,
Pipes
,
Equations of motion
,
Finite element analysis
,
Flow (Dynamics)
,
Pipelines
Ultra Heavy Wall Linepipe X65 for the Most Stringent Applications: Metallurgical Design and Industrial Development
Alfonso Izquierdo, Hector Quintanilla, Gilles Richard, Enrique Garcia, Mariano Armengol, Paolo Novelli, Luigi Di Vito, Giorgio Porcu, Gianluca Mannucci, Ettore Anelli, Aldo Mannucci
OMAE 2009; 69-75https://doi.org/10.1115/OMAE2009-79153
Topics:
Design
,
Pipes
,
Wall thickness
,
Low temperature
,
Ocean engineering
,
Steel
,
Stress
,
Cable reels
,
Currents
,
Cycles
Validation of a 3-Dimensional Finite Element Analysis Model of Deep Water Steel Tube Umbilical in Combined Tension and Cyclic Bending
OMAE 2009; 77-86https://doi.org/10.1115/OMAE2009-79168
Topics:
Finite element analysis
,
Steel
,
Tension
,
Water
,
Friction
,
Internal friction
,
Kinematics
,
Modeling
,
Pipes
,
Stress
An Investigation Into the Behaviour of Composite Repaired Pipelines Under Combined Internal Pressure and Bending
OMAE 2009; 111-118https://doi.org/10.1115/OMAE2009-79177
Topics:
Composite materials
,
Pipelines
,
Pressure
,
Fiber reinforced composites
,
Pipes
,
Stress
,
Maintenance
,
Steel
,
Corrosion
,
Finite element analysis
Pipe-in-Pipe Substructure Modeling in Deepwater Riser Design Analysis
OMAE 2009; 129-138https://doi.org/10.1115/OMAE2009-79217
Topics:
Design
,
Modeling
,
Pipeline risers
,
Pipes
,
Risers (Casting)
,
Stress
,
Buoyancy
,
Fatigue damage
,
Friction
,
Springs
Non-Linear Hysteretic Seabed Model for Catenary Pipeline Contact
OMAE 2009; 145-154https://doi.org/10.1115/OMAE2009-79259
Topics:
Pipelines
,
Seabed
,
Pipes
,
Pipeline risers
,
Risers (Casting)
,
Soil
,
Cycles
,
Density
,
Fatigue analysis
,
Fatigue life
Long-Term Fatigue and Extreme Design of Steel Risers
OMAE 2009; 163-171https://doi.org/10.1115/OMAE2009-79272
Topics:
Design
,
Fatigue
,
Pipeline risers
,
Risers (Casting)
,
Steel
,
Seas
,
Statistics
,
Stress
,
Damage
,
Electromagnetic scattering
The Effects on Process Performance of Reducing the Pressure From 36 to 1Bar in Hyperbaric MIG Welding
OMAE 2009; 197-205https://doi.org/10.1115/OMAE2009-79291
Topics:
Gas metal arc welding
,
Pressure
,
Water
,
Welding
,
Electrodes
,
Maintenance
,
Geometry
,
Mechanical properties
,
North Sea
,
Seawater
Fatigue Design of Flowline Systems With Slug Flow
OMAE 2009; 207-212https://doi.org/10.1115/OMAE2009-79308
Topics:
Fatigue design
,
Slug flows
,
Arches
,
Design
,
Fatigue damage
,
Fatigue
,
Stress
,
Buckling
,
Damage
,
Deepwater development
An Experimental Study of the Interaction Between Pipe Structure and Internal Flow
OMAE 2009; 213-220https://doi.org/10.1115/OMAE2009-79312
Topics:
Internal flow
,
Pipes
,
Drilling
,
Flow (Dynamics)
,
Pipeline risers
,
Computation
,
Experimental analysis
,
Fluid dynamics
,
Fluid-dynamic forces
,
Gas flow
The Development of a Refined Assessment Procedure for the Pipeline Reeling Process Using Reliability and Finite Element Techniques
OMAE 2009; 233-241https://doi.org/10.1115/OMAE2009-79348
Topics:
Finite element analysis
,
Pipelines
,
Reliability
,
Wall thickness
,
Pipes
,
Buckling
,
Cable reels
,
Design
,
Yield strength
,
Coating processes
Expansion Design Philosophy to Prevent Buckle Walking at Very Uneven Seabed
OMAE 2009; 243-248https://doi.org/10.1115/OMAE2009-79363
Topics:
Design
,
Seabed
,
Buckling
,
Friction
,
Pipelines
,
Rocks
,
Ocean engineering
,
Cycles
,
Displacement
,
Manifolds
Pipeline Design Methodology With Respect to Internal Corrosion
OMAE 2009; 249-257https://doi.org/10.1115/OMAE2009-79369
Topics:
Corrosion
,
Piping design
,
Design
,
Buckling
,
Clearances (Engineering)
,
Pipes
,
Wall thickness
,
Water
,
Arches
,
Finite element analysis
Effects of Girth Weld on the Local Buckling Response of Conventional Grade Pipelines
OMAE 2009; 277-284https://doi.org/10.1115/OMAE2009-79394
Topics:
Buckling
,
Pipelines
,
Design
,
Piping design
,
Finite element analysis
,
Ice
,
Calibration
,
Deformation
,
Icebergs
,
Keel
Recent Developments in Drilling Riser Disconnect and Recoil Analysis for Deepwater Applications
OMAE 2009; 305-318https://doi.org/10.1115/OMAE2009-79427
Topics:
Deepwater development
,
Pipeline risers
,
Drilling
,
Water
,
Fluid dynamics
,
Vessels
,
Collapse
,
Compression
,
Computer simulation
,
Computer software
SCR-Seafloor Interaction Modeling With Winkler, Pasternak and Kerr Beam-on-Elastic-Foundation Theories
OMAE 2009; 343-349https://doi.org/10.1115/OMAE2009-79459
Topics:
Displacement
,
Elasticity
,
Finite element analysis
,
Finite element model
,
Modeling
,
Pipeline risers
,
Risers (Casting)
,
Seabed
,
Soil
,
Stress
Application of Flexible Risers in Shallow Water: Weight Added Wave Configuration
OMAE 2009; 373-380https://doi.org/10.1115/OMAE2009-79476
Topics:
Flexible risers
,
Water
,
Waves
,
Weight (Mass)
,
Pipeline risers
,
Risers (Casting)
,
FPSO
,
Buoyancy
,
Reliability
,
Arches
The Evolution of Free Standing Risers
OMAE 2009; 381-391https://doi.org/10.1115/OMAE2009-79487
Topics:
Pipeline risers
,
Risers (Casting)
,
Vessels
,
Gulf of Mexico
,
Hybrid risers
,
Optimization
,
Seabed
,
Steel
,
System architecture
,
Tieback anchors
Bending Capacity Analyses of Corroded Pipelines
OMAE 2009; 401-410https://doi.org/10.1115/OMAE2009-79501
Topics:
Pipelines
,
Pipes
,
Finite element analysis
,
Pressure
,
Testing
,
Compression
,
Containment
,
Corrosion
,
Fitness-for-service
,
Vessels
Bending Stiffener Design Through Structural Optimization
Rafael Loureiro Tanaka, Lauro Massao Yamada da Silveira, Joa˜o Paulo Zi´lio Novaes, Eduardo Esterqui de Barros, Clo´vis de Arruda Martins
OMAE 2009; 411-418https://doi.org/10.1115/OMAE2009-79505
Topics:
Design
,
Structural optimization
,
Optimization algorithms
,
Stress
,
Deformation
,
Flexible risers
,
Optimization
,
Shear (Mechanics)
From Installation to Operation: A Full-Scale Finite Element Modeling of Deep-Water Pipe-in-Pipe System
OMAE 2009; 439-446https://doi.org/10.1115/OMAE2009-79519
Topics:
Buckling
,
Compression
,
Finite element analysis
,
Gulf of Mexico
,
High pressure (Physics)
,
High temperature
,
Locks (Waterways)
,
Modeling
,
Pipes
,
Water
Extra High-Pressure High-Temperature (XHPHT) Flowlines: Design Considerations and Challenges
OMAE 2009; 469-478https://doi.org/10.1115/OMAE2009-79537
Topics:
Design
,
High pressure (Physics)
,
High temperature
,
Finite element analysis
,
Testing
,
Pipes
,
Water
,
Temperature
,
Thermal expansion
,
Buckling
Experimental Investigation of Fracture in Wrinkled Pipelines Under Monotonic Axial and Bending Deformation
OMAE 2009; 479-486https://doi.org/10.1115/OMAE2009-79540
Topics:
Deformation
,
Fracture (Materials)
,
Fracture (Process)
,
Pipelines
,
Pipes
,
Failure mechanisms
,
Failure
,
Fluid pressure
,
Petrochemicals
,
Rupture
The Impact of Flexbarrier Ingress on Flexlok Stress
OMAE 2009; 533-538https://doi.org/10.1115/OMAE2009-79624
Topics:
Stress
,
Wire
,
Pressure
,
Pipes
,
Polymers
,
Creep
,
Finite element analysis
,
Fluids
,
Industrial research
,
Locks (Waterways)
Fatigue Life Prediction Due to Slug Flow in Extra Long Submarine Gas Pipelines Using Fourier Expansion Series
OMAE 2009; 549-557https://doi.org/10.1115/OMAE2009-79642
Topics:
Fatigue life
,
Pipelines
,
Slug flows
,
Underwater vehicles
,
Pipes
,
Dynamic response
,
Fluids
,
Stress
,
Arches
,
Condensed matter
The Influence of Internal Pressure on Pipeline Natural Frequency
Andre´ Luiz Lupinacci Massa, Nelson Szilard Galgoul, Nestor Oscar Guevara Junior, Antonio Carlos Fernandes, Fa´bio Moreira Coelho, Severino Fonseca da Silva Neto
OMAE 2009; 559-566https://doi.org/10.1115/OMAE2009-79666
Topics:
Pipelines
,
Pressure
,
Pipes
,
Compression
,
Finite element model
,
Stress
,
Temperature
,
Tension
Pipe-in-Pipe for Gas Production in Deep Water Offshore Brazil
OMAE 2009; 575-585https://doi.org/10.1115/OMAE2009-79700
Topics:
Ocean engineering
,
Pipes
,
Water
,
Flow (Dynamics)
,
FPSO
,
Cable reels
,
Design
,
Gas flow
,
Heat transfer coefficients
,
Pipelines
Characterization and Technical Comparison Between Steel Tube Umbilicals and Thermoplastic Hoses Umbilicals
Andre´ Athayde Gonc¸alves, Fernando Buscacio de Almeida, Marco Antoˆnio Dias, William Albuquerque da Silva, Yonathan Reboh
OMAE 2009; 587-597https://doi.org/10.1115/OMAE2009-79701
Topics:
Steel
,
Ocean engineering
,
Water
,
Collapse
,
Construction
,
Corrosion
,
Design
,
Failure
,
Fatigue analysis
,
Manufacturing
Progressive Wrinkling and Collapse of Pipes Due to Axial Cycling
OMAE 2009; 627-635https://doi.org/10.1115/OMAE2009-79754
Topics:
Collapse
,
Pipes
,
Cycles
,
Stress
,
Compression
,
Damage
,
Failure
,
Pipelines
,
Plasticity
,
Pressure
Straight Talk About Riser Tension and More
OMAE 2009; 637-651https://doi.org/10.1115/OMAE2009-79759
Topics:
Pipeline risers
,
Risers (Casting)
,
Tension
,
Pressure
,
Stress
,
String
,
Differential equations
,
Hydrostatics
,
Weight (Mass)
On the Reliable Modeling of the Collapse and Post-Collapse Behavior of Pipelines
OMAE 2009; 653-659https://doi.org/10.1115/OMAE2009-79764
Topics:
Collapse
,
Modeling
,
Pipelines
,
Manufacturing
,
Pressure
,
Boundary-value problems
,
Engineering simulation
,
Finite element analysis
,
Pipes
,
Residual stresses
Advanced Dynamic Stability Analysis
OMAE 2009; 661-673https://doi.org/10.1115/OMAE2009-79778
Topics:
Dynamic stability
,
Finite element analysis
,
Pipelines
,
Pipes
,
Soil
,
Stability
,
Dynamic response
,
Modeling
,
Underwater pipelines
,
Design
Strain lntensification Due to Material Discontinuity at Field Joints Adjacent to Thick Wall Insulation Coating
OMAE 2009; 675-682https://doi.org/10.1115/OMAE2009-79779
Topics:
Coatings
,
Insulation
,
Pipelines
,
Polymers
,
Stiffness
,
Corrosion
,
Finite element analysis
,
High pressure (Physics)
,
High temperature
,
Underwater pipelines
Fatigue Performance of SMLS SCR Girth Welds: Comparison of Prefabrication-Type WPS
Philippe P. Darcis, Israel Marines-Garcia, Luigi Di Vito, Gilles Richard, Eduardo A. Ruiz, Marcos P. de Souza, Elsa C. Marques, Diego N. Dell’Erba, Mariano Armengol, Hector Quintanilla
OMAE 2009; 683-692https://doi.org/10.1115/OMAE2009-79811
Topics:
Fatigue
,
Modular construction
,
Welded joints
,
Fatigue strength
,
Welding
,
Finishing
,
Geometry
,
Manufacturing
,
Ocean engineering
,
Pipes
Global Design and Analysis of Umbilical in Offshore Applications
OMAE 2009; 709-716https://doi.org/10.1115/OMAE2009-79841
Topics:
Design
,
Ocean engineering
,
Water
,
Gulf of Mexico
,
Steel
,
Vessels
,
Cables
,
Fibers
,
Fluids
,
Manufacturing
Polynomial Models Applied to the Analysis of Slender Marine Structures
OMAE 2009; 777-786https://doi.org/10.1115/OMAE2009-79926
Topics:
Marine structures
,
Polynomials
,
Pipeline risers
,
Risers (Casting)
,
Computers
,
Dynamic response
,
Safety
,
Seas
,
Stress
,
Tension
Deepwater SCR Installation With the HLV Thialf
OMAE 2009; 787-795https://doi.org/10.1115/OMAE2009-79966
Topics:
Containers
,
Cranes
,
Ocean engineering
,
Rotation
,
Seabed
,
Steel catenary risers
,
Storage
,
Tension-leg platforms
,
Underwater pipelines
,
Vessels
A New Top Connection System for Steel Catenary Risers
Claudio Marcio Silva Dantas, Jose´ Renato Mendes de Sousa, Fernando Jorge Mendes de Sousa, Marcos Queija de Siqueira, Isai´as Quaresma Masetti
OMAE 2009; 805-811https://doi.org/10.1115/OMAE2009-79980
Topics:
Fatigue life
,
Mooring
,
Rotation
,
Semi-submersible offshore structures
,
Steel
,
Steel catenary risers
,
Stress
,
Titanium
Most Recent Developments for Monitoring and Controlling the Annulus Conditions of Marlim-Sul Flexible Risers
Alexandre S. Rabelo, Antonio Motta, Antonio Romero, Joa˜o Paulo C. e S. Nunes, Jose´ L. Zaganelli, Jr., Marcelo Brack
OMAE 2009; 821-827https://doi.org/10.1115/OMAE2009-80011
Topics:
Annulus
,
Flexible risers
,
Pipeline risers
,
Risers (Casting)
,
Data acquisition
,
Fittings
,
Maintenance
,
Manometers
,
Pressure
,
Control systems
Numerical Analysis of a Flexible Pipe With Damaged Tensile Armor Wires
OMAE 2009; 829-839https://doi.org/10.1115/OMAE2009-80014
Topics:
Armor
,
Numerical analysis
,
Pipes
,
Wire
,
Rupture
,
Finite element model
,
Pressure
,
Rotation
,
Stress
,
Stress concentration
Assessment of Fracture Integrity for Trawl Impact of the Ormen Lange SFD Pipelines
OMAE 2009; 841-850https://doi.org/10.1115/OMAE2009-80017
Topics:
Fracture (Materials)
,
Fracture (Process)
,
Pipelines
,
Pressure
,
Accounting
,
Damage
,
Design
,
Failure
,
Finite element analysis
,
Finite element model
Scour Studies for a Gas Pipeline Crossing in Negro River, Brazil
OMAE 2009; 851-857https://doi.org/10.1115/OMAE2009-80064
Topics:
Pipelines
,
Rivers
,
Dynamics (Mechanics)
,
Sediments
,
Arches
,
Computer simulation
,
Cycles
,
Damage
,
Engineering design
,
Erosion
FEA-Based Study of Pipeline Protection From Anchors
OMAE 2009; 859-866https://doi.org/10.1115/OMAE2009-80130
Topics:
Finite element analysis
,
Pipelines
,
Rocks
,
Soil
,
Underwater pipelines
Thermal Expansion Analysis of Pipe-in-Pipe System Having Multiple Bulkheads
OMAE 2009; 867-874https://doi.org/10.1115/OMAE2009-80156
Topics:
Breakwaters
,
Pipes
,
Thermal expansion
,
Design
,
Friction
,
Operating temperature
,
Pressure
,
Seabed
,
Stiffness
,
Stress