Various methods of toughening the bonding between the interleaf and laminate glass fiber reinforced polymer (GFRP) has been developed due to the increasing applications in industries. A polystyrene (PS) additive modified epoxy is used to improve the diffusion and precipitation region between polysulfone (PSU) interleaf and epoxy due to its influence on the curing kinetics without changing glass transition temperature and viscosity of the curing epoxy. The temperature dependent diffusivities of epoxy, amine hardener, and PSU are determined by using Attenuated Total Reflection-Fourier Transfer Infrared Spectroscopy (ATR-FTIR) through monitoring the changing absorbance of their characteristic peaks. Effects of PS additive on diffusivity in the epoxy system is investigated by comparing the diffusivity between non-modified and PS modified epoxy. The consumption rate of the epoxide group in the curing epoxy reveals the curing reaction rate, and the influence of PS additive on the curing kinetics is also studied by determining the degree of curing with time. A diffusivity model coupled with curing kinetics is applied to simulate the diffusion and precipitation process between PSU and curing epoxy. The effect of geometry factor is considered to simulate the diffusion and precipitation process with and without the existence of fibers. The simulation results show the diffusion and precipitation depths which matches those observed in the experiments.
- Manufacturing Engineering Division
Interlaminar Toughening of GFRP: Part 2 — Characterization and Numerical Simulation of Curing Kinetics
- Views Icon Views
- Share Icon Share
- Search Site
Bian, D, Beeksma, BR, Shim, DJ, Jones, M, & Yao, YL. "Interlaminar Toughening of GFRP: Part 2 — Characterization and Numerical Simulation of Curing Kinetics." Proceedings of the ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. Volume 2: Additive Manufacturing; Materials. Los Angeles, California, USA. June 4–8, 2017. V002T03A007. ASME. https://doi.org/10.1115/MSEC2017-2982
Download citation file: