Volumes | International Manufacturing Science and Engineering Conference | American Society of Mechanical Engineers Digital Collection

Topics: Additive manufacturing , Fluids , Metals , Thermal management , Elevations (Drawings) , Heat transfer , Lasers , Methanol , Permeability , Porosity

3D Printing-Enabled Layer Hierarchies

Kenan Song, Dharneedar Ravichandran, Sayli Jambhulkar, Weiheng Xu

MSEC 2023; V001T01A002https://doi.org/10.1115/MSEC2023-100937

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Advanced materials , Architecture , Chemical properties , Coatings , Composite materials , Density , Design , Energy storage , Fibers

Fatigue Study of Ti-6Al-4V Fabricated by Laser Powder Bed Fusion: Role of Defect Structure and Residual Stress

Seyedmehrab Hosseini, Ehsan Vaghefi, Elham Mirkoohi

MSEC 2023; V001T01A003https://doi.org/10.1115/MSEC2023-101307

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Fatigue , Fatigue life , Lasers , Stress

Additively Manufactured NiTiHf Shape Memory Alloy Transformation Temperature Evaluation by Radial Basis Function and Perceptron Neural Networks

Hossein Abedi, Mohammadjavad Abdollahzadeh, Abdalmageed Almotari, Majed Ali, Shiva Mohajerani, Mohammad Elahinia, Ala Qattawi

MSEC 2023; V001T01A004https://doi.org/10.1115/MSEC2023-101325

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Artificial neural networks , Design , Lasers , Machine learning , Shape memory alloys , Temperature

Flaw Detection in Wire Arc Additive Manufacturing Using In-Situ Acoustic Sensing and Graph Signal Analysis

Benjamin Bevans, André Ramalho, Ziyad Smoqi, Aniruddha Gaikwad, Telmo G. Santos, Prahalad Rao, J. P. Oliveira

MSEC 2023; V001T01A005https://doi.org/10.1115/MSEC2023-101622

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Acoustics , Additive manufacturing , Flaw detection , Signals , Welding , Wire , Electric arcs , Energy resources , Geometry , Joining

Tunable Stiffness in Material Extrusion of Thermoplastic Urethane

Ryan Van Domelen, Duy Le, Andrew Broman, Sandra Hawley, John Wentz

MSEC 2023; V001T01A006https://doi.org/10.1115/MSEC2023-101823

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Extruding , Stiffness , Urethane elastomers

Print Speed Optimization for UV-Assisted 3D Printing of Lunar Regolith Simulants Composite Inks

Alexandra Marnot, Jaehyun Cho, Blair Brettmann

MSEC 2023; V001T01A007https://doi.org/10.1115/MSEC2023-102275

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Composite materials , Inks , Optimization , Ultraviolet curing , Ultraviolet radiation

An Inexpensive 3D Printing System for Functional Inks Used In Electronics and Bio Applications

Achint Thakkar, Ritik Jamghare, Ravi Mishra, Omar Faruk Emon

MSEC 2023; V001T01A008https://doi.org/10.1115/MSEC2023-103018

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Electronics , Inks , Polymers , Printing

The Effect of Voltage on the Initiation of Natural Pulsation in Electrohydrodynamic Jet Printing

Angelo Hawa, Ali Bahrami, Kira Barton

MSEC 2023; V001T01A009https://doi.org/10.1115/MSEC2023-103321

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Electrohydrodynamics , Printing

Physics-Based Feedforward Control of Thermal History in Laser Powder Bed Fusion Additive Manufacturing

Alexander Riensche, Benjamin Bevans, Ziyad Smoqi, Reza Yavari, Ajay Krishnan, Josie Gilligan, Nicholas Piercy, Kevin Cole, Prahalada Rao

MSEC 2023; V001T01A010https://doi.org/10.1115/MSEC2023-103829

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Feedforward control , Lasers , Physics , Grain size , Heat , Joining , Materials characterization , Microhardness , Modeling

Multi-Resolution Quality Inspection for Additive Manufacturing

Hui Yang, Joni Reijonen, Alejandro Revuelta

MSEC 2023; V001T01A011https://doi.org/10.1115/MSEC2023-104348

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Inspection , Resolution (Optics) , Wavelets

Defect Segmentation From X-Ray Computed Tomography of Laser Powder Bed Fusion Parts: A Comparative Study Among Machine Learning, Deep Learning, and Statistical Image Thresholding Methods

Hasnaa Ouidadi, Boyang Xu, Shenghan Guo

MSEC 2023; V001T01A012https://doi.org/10.1115/MSEC2023-104387

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Computerized tomography , Image segmentation , Lasers , Machine learning

Artificial Intelligence-Based Design of Process Parameters in Laser Powder Bed Fusion of Ti-6Al-4V for Desired Solidification Structure

Ehsan Vaghefi, Elham Mirkoohi

MSEC 2023; V001T01A013https://doi.org/10.1115/MSEC2023-104463

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Design , Lasers , Machine learning , Solidification , Temperature , Temperature gradient , Errors , Finite element analysis , Finite element model

Thermal and Fast Neutron Irradiation Effects on Additively Manufactured and Wrought Inconel 625

Mohanish Andurkar, Valentina O’Donnell, Tahmina Keya, Bart Prorok, John Gahl, Scott M. Thompson

MSEC 2023; V001T01A014https://doi.org/10.1115/MSEC2023-104496

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Hardening , Irradiation (Radiation exposure) , Lasers , Neutrons , Radiation (Physics) , Radiation damage , Embrittlement , Alloys , Fluence (Radiation measurement)

In-Situ Detection and Prediction of WAAM Cross Feature Geometry

Austen Thien, Zaky Hussein, Christopher Saldana

MSEC 2023; V001T01A015https://doi.org/10.1115/MSEC2023-104525

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Geometry , Wire , Modeling , Metals , Path planning , Regression models , Toolpaths

Rapid 3D Printing of Nanoporous Copper Powders via Micro-Clip

Luyang Liu, Natalya Kublik, Bruno Azeredo, Xiangfan Chen

MSEC 2023; V001T01A016https://doi.org/10.1115/MSEC2023-104610

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Copper powders , Printing , Resolution (Optics) , Extruding , Resins , Copper , Fillers (Materials) , Metals , Metalwork

Continuous Fiber Path Optimization in Composite Additive Manufacturing via a Finite Element Model With B-Spline Fiber Parameterization

Molong Duan, Shuaiyin He

MSEC 2023; V001T01A017https://doi.org/10.1115/MSEC2023-104775

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , B-splines , Composite materials , Fibers , Finite element model , Optimization , Parametrization

Thermal-Image-Enabled Additive Manufacturing Process Monitoring and Extrusion Trajectory Compensation

Molong Duan, Siqi Chen, Yuexin Yang

MSEC 2023; V001T01A018https://doi.org/10.1115/MSEC2023-104786

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Extruding , Process monitoring , Trajectories (Physics)

Modeling and Characterizing a Novel Hybrid Infill Pattern for Additive Manufacturing

Md Saidur Rahman Roney, AMM Nazmul Ahsan

MSEC 2023; V001T01A019https://doi.org/10.1115/MSEC2023-104929

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Absorption , Additive manufacturing , Compressive strength , Modeling , Density , Compression , Mechanical properties , Equipment performance , Honeycomb structures

Modeling of Laser Powder Bed Fusion of Inconel-718 Towards Relating Processing to Properties

Alexandra Vest, Ruixiong Hu, Antoinette Maniatty

MSEC 2023; V001T01A020https://doi.org/10.1115/MSEC2023-104941

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Lasers , Melting , Modeling , Simulation

Novel STL-Free Design Paradigm for High-Resolution Multi-Scale Architected Cellular Materials in Additive Manufacturing

Sina Rastegarzadeh, Jida Huang

MSEC 2023; V001T01A021https://doi.org/10.1115/MSEC2023-104984

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Design , Resolution (Optics) , Computer-aided design , Manufacturing , Algorithms , Architecture , Composite materials , Geometry , Microscale devices

A 3D Convolutional Neural Networks-Based Model for High-Resolution Prediction and Compensation of Geometrical Errors of Additive Manufactured Parts

Benjamin Standfield, Zhenyu (James) Kong

MSEC 2023; V001T01A022https://doi.org/10.1115/MSEC2023-105015

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Errors , Resolution (Optics)

Real-Time Prediction of Pores and Their Lifespan in Laser Melting Using Transfer Learning

Mahsa Valizadeh, Samuel Clark, Kamel Fezzaa, Sarah Wolff

MSEC 2023; V001T01A023https://doi.org/10.1115/MSEC2023-105098

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Lasers , Melting

Real-Time Monitoring and Gaussian Process-Based Estimation of the Melt Pool Profile in Direct Energy Deposition

Jiaqi Lyu, Javid Akhavan, Youmna Mahmoud, Ke Xu, Chaitanya Krishna Prasad Vallabh, Souran Manoochehri

MSEC 2023; V001T01A024https://doi.org/10.1115/MSEC2023-105104

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Algorithms , Complementary metal oxide semiconductors , Fittings , Image processing , Lasers , Regression models , Sensitivity analysis

Model Calibration in Inkjet Printing Process

Christian Zuniga-Navarrete, Chi Zhou, Hongyue Sun, Luis Javier Segura

MSEC 2023; V001T01A025https://doi.org/10.1115/MSEC2023-105134

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Calibration , Printing , Stochastic processes

Anomaly Detection of Laser-Based Metal Additive Manufacturing Using Neural-Variational Auto-Encoder

Sean Rescsanski, Aref Yadollahi, Mojtaba Khanzadeh, Farhad Imani

MSEC 2023; V001T01A026https://doi.org/10.1115/MSEC2023-105156

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Lasers , Metals

Effect of In-Situ Laser Polishing on Microstructure, Surface Characteristics, and Phase Transformation of LPBF Martensitic Stainless Steel

Majed Ali, Abdalmageed Almotari, Anwar Al Gamal, Ala’aldin Alafaghani, Hossein Abedi, Ala Qattawi

MSEC 2023; V001T01A027https://doi.org/10.1115/MSEC2023-105182

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Laser micro polishing , Metals , Phase transitions , Stainless steel , Surface roughness

Influence of Modified Heat Treatments and Build Orientations on the Microstructure of Additively Manufactured IN718

Abdalmageed Almotari, Ala’aldin Alafaghani, Majed Ali, Anwar Al Gamal, Hossein Abedi, Ala Qattawi

MSEC 2023; V001T01A028https://doi.org/10.1115/MSEC2023-105190

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Heat , Lasers

A Versatile Point Cloud Registration Method for Quantifying Geometric Deviation in Additive Manufacturing

Chuan He, Chinedum Okwudire

MSEC 2023; V001T01A029https://doi.org/10.1115/MSEC2023-105507

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing

Investigation of the Interfacial Adhesion Strength of Parts Additively Manufactured on Fabrics

Maxwell Blais, Scott Tomlinson, Bashir Khoda

MSEC 2023; V001T01A030https://doi.org/10.1115/MSEC2023-105526

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Adhesion , Testing , Textiles

A Prediction Method for Catchment Efficiency Loss due to Coaxial Nozzle Wear in Powder Fed Directed Energy Deposition Systems

Lisa DeWitte, Katherine Fu

MSEC 2023; V001T01A031https://doi.org/10.1115/MSEC2023-105582

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Computational fluid dynamics , Lasers , Manufacturing , Nozzles , Wear , Geometry , Simulation , Hazardous wastes , Machine tools , Machinery

Application of Digital Twins to Laser Powder Bed Fusion Additive Manufacturing Process Control

Ho Yeung, Felix Kim, Alkan Donmez

MSEC 2023; V001T01A032https://doi.org/10.1115/MSEC2023-105627

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Digital twin , Lasers , Process control , Machine learning , Artificial intelligence , Construction , Manufacturing , Optimization , Physics

Machine Learning-Based Modeling of Electric-Field-Assisted Direct Ink Writing (EDIW) Process

Yinong Chen, Anupam Ajit Deshpande, Erina Baynojir Joyee, Yayue Pan

MSEC 2023; V001T01A033https://doi.org/10.1115/MSEC2023-106095

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Inks , Machine learning , Machinery , Modeling

Advanced Materials Manufacturing

Powder-Binder Interaction in Binder Jetting Process: A Simulation Study on Bimodal Powders

Kazi Safowan Shahed, Guha Manogharan

MSEC 2023; V001T02A001https://doi.org/10.1115/MSEC2023-104366

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Binders (Materials) , Simulation

Additive Insert Molding (AIM) – A Practical Paradigm for Mass Customization of Multi-Material/Functional Parts

Ryan O'Quinn, Sai Aditya Pradeep, Srikanth Pilla, Saeed Farahani

MSEC 2023; V001T02A002https://doi.org/10.1115/MSEC2023-104808

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Design , Injection molding , Manufacturing , Molding , Reliability

Effect of Ultrasonic Vibration on Physical and Tensile Properties of Fused Deposition Modeled Polylactic Acid Specimens

Raihan Quader, David Grewell, Lokesh Karthik Narayanan

MSEC 2023; V001T02A003https://doi.org/10.1115/MSEC2023-104816

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Diffusion (Physics) , Tensile strength , Vibration

Composites 4.0: Enabling the Modernization of Legacy Manufacturing Assets in South Carolina

Amit Makarand Deshpande, Gautami Girish Keskar, Sai Aditya Pradeep, Saeed Farahani, Srikanth Pilla

MSEC 2023; V001T02A004https://doi.org/10.1115/MSEC2023-104904

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Composite materials , Extruding , Injection molding , Manufacturing

Effect of Multi-Axial Forging on Mechanical Properties and Microstructures of AA7075/TaC Composites

John Samson Khalkho, D. Benny Karunakar

MSEC 2023; V001T02A005https://doi.org/10.1115/MSEC2023-105434

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Composite materials , Forging , Mechanical properties , Tensile strength , Elongation , Vickers hardness testing , Casting , Diffraction , Dislocation density , Ductility

Biomanufacturing

Biocompatibility and Mechanical Behaviour Studies on Wire-Arc Additive Manufactured Stainless Steel 316L and Shape Memory Alloy (NiTi) Materials for Biomedical Implants

Geethapriyan T., Jhasketan Badhai, Sibi Karthik, Avinash Sonawane, I. A. Palani

MSEC 2023; V001T03A001https://doi.org/10.1115/MSEC2023-100737

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Biocompatibility , Biomedicine , Mechanical behavior , Mechanical properties , Nickel titanium alloys , Shape memory alloys , Stainless steel , Wire

3D-Fabrication of Hydroxyapatite-Polysaccharide Composite Scaffolds for Bone Tissue Engineering

Ethan O’Malley, Roozbeh (Ross) Salary

MSEC 2023; V001T03A002https://doi.org/10.1115/MSEC2023-100819

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Bone , Composite materials , Manufacturing

Experimental Analysis on Tissue Fracture in Needle Insertion Process

Yingda Hu, Shilun Du, Yong Lei

MSEC 2023; V001T03A003https://doi.org/10.1115/MSEC2023-102339

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Biological tissues , Experimental analysis , Fracture (Materials) , Fracture toughness , Needles , Phantoms , Polyvinyl alcohol

Manufacturing Processes of Implantable Microelectrode Array for in Vivo Neural Electrophysiological Recordings and Stimulation: A State-of-The-Art Review

Dongyang Yi, Yao Yao, Yi Wang, Lei Chen

MSEC 2023; V001T03A004https://doi.org/10.1115/MSEC2023-103285

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Electrophysiology , Manufacturing

PEDOT: PSS Modified Laser Scribed Graphene for Flexible and Wearable Bioelectronics

Suheng Zhang, Yao Yao, Yi Wang

MSEC 2023; V001T03A005https://doi.org/10.1115/MSEC2023-103318

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Bioelectronics , Flexible electronics , Graphene , Lasers

Controlling Rheological Properties of Hybrid Hydrogel Using Short Fiber for Extrusion-Based 3D Bioprinting Process

Slesha Tuladhar, Scott Clark, MD Ahasan Habib

MSEC 2023; V001T03A006https://doi.org/10.1115/MSEC2023-104233

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Bioprinting , Extruding , Fibers , Hydrogels , Rheology , Ceramic matrix composites , Inks , Nanofibers , Biocompatibility , Biological tissues

Systemic Control of 3D Bioprinting Process Parameters to Achieve Defined Scaffold Porosity

Connor Quigley, Slesha Tuladhar, Samrat Adhikari, MD Ahasan Habib

MSEC 2023; V001T03A007https://doi.org/10.1115/MSEC2023-104235

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Bioprinting , Porosity , Architecture , Extruding , Geometry , Printing , Biological cells , Biological tissues , Biomaterials , Hydrogels

Review of Interventional Robotic Systems

Yang Liu, Dian-Ru Li

MSEC 2023; V001T03A008https://doi.org/10.1115/MSEC2023-104300

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: End effectors , Robotics

An Investigation on 3D Bio-Printed Scaffold Shape Fidelity Incubated in a Custom-Made Perfusion Bioreactor

Jack Mankowsky, Connor Quigley, Scott Clark, MD Ahasan Habib

MSEC 2023; V001T03A009https://doi.org/10.1115/MSEC2023-104321

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Bioreactors , Shapes , Ceramic matrix composites , Fluid dynamics , Biological tissues , Bioprinting , Design , Diffusion (Physics) , Viscosity , Weight (Mass)

Fluid Flow Analysis for Suitable 3D Bio-Printed Scaffold Architectures to Incubate in a Perfusion Bioreactor: A Simulation Approach

Scott Clark, Connor Quigley, Jack Mankowsky, MD Ahasan Habib

MSEC 2023; V001T03A010https://doi.org/10.1115/MSEC2023-104324

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Architecture , Bioreactors , Fluid dynamics , Simulation

Inhouse Multi-Material Nozzle System Design and Fabrication for 3D Bioprinting Process: Next Step

Connor Quigley, Warren Hurd, Scott Clark, Rokeya Sarah, MD Ahasan Habib

MSEC 2023; V001T03A011https://doi.org/10.1115/MSEC2023-104454

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Bioprinting , Design , Manufacturing , Nozzles , Biological tissues , Flow (Dynamics) , Biological cells , Biomedicine , Ceramic matrix composites , Drugs

3D Printed Bioinspired Hierarchical Surface Structure With Tunable Wettability

M. M. Towfiqur Rahman, Erina Baynojir Joyee

MSEC 2023; V001T03A012https://doi.org/10.1115/MSEC2023-104516

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Biomedicine , Biomimetics , Columns (Structural) , Design , Manufacturing , Microscale devices , Printing , Resolution (Optics) , Surface roughness

Development of an Open-Source Low-Cost Modular Quad-Extrusion 3D Bioprinter

Ralf Zgeib, Xiaofeng Wang, Ahmadreza Zaeri, Fucheng Zhang, Kai Cao, Robert Chang

MSEC 2023; V001T03A013https://doi.org/10.1115/MSEC2023-104996

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Bioprinting , Extruding , Hydrogels , Printing

3D Printing of Filefish Inspired Microscale Multifunctional Structure

Qingqing He, Han Tang, Yushun Zeng, Yang Yang

MSEC 2023; V001T03A014https://doi.org/10.1115/MSEC2023-105121

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Biomimetics , Microscale devices

A Force Sensor-Less Method for Identifying the Young’s Modulus of Soft Tissue

Zhen Wang, Tian Xu, Yong Lei

MSEC 2023; V001T03A015https://doi.org/10.1115/MSEC2023-105162

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Sensors , Soft tissues , Young's modulus

Design of 3D Printable Led Heat Sink Inspired by Firefly Wings

Ali Sotoodeh, Yiran Yang, Lei Di

MSEC 2023; V001T03A016https://doi.org/10.1115/MSEC2023-105248

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Biomimetics , Design , Heat sinks , Wings

Acoustic Assembly Photopolymerization of Bioinspired Multifunctional Devices With Programmable Adhesion

Ketki M. Lichade, Yayue Pan

MSEC 2023; V001T03A017https://doi.org/10.1115/MSEC2023-105866

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Acoustics , Adhesion , Biomimetics , Manufacturing

A Bionic Design With Wing Structures to Assist Flexible Microelectrode Implantation

Leihan Zhang, Yi Wang, Yi Cai

MSEC 2023; V001T03A018https://doi.org/10.1115/MSEC2023-105870

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Bionics , Design , Probes , Wings

Study on Dicing Mechanism for PZT-4 Piezoelectric Ceramics Composite

Yang Zhou, Yao Liu, Zhou Jinjie, Zhanling Guo

MSEC 2023; V001T03A019https://doi.org/10.1115/MSEC2023-106299

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Composite materials , Piezoelectric ceramics , Surface roughness

Simulation and Experiment Analysis of Driveshaft

Jiahao Li, Yao Liu, Yang Zhou, Youzhe Wang, Zhanling Guo, Bin Shen

MSEC 2023; V001T03A020https://doi.org/10.1115/MSEC2023-106319

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Experimental analysis , Manufacturing , Simulation , Stiffness , Wire , Deformation , Displacement , Microchannels , Biological tissues , Damage

Polymer-Derived SiC Ceramic With Triply Period Minimal Surface Structure Fabrication Through Digital Light Processing

Haiyu Liu, Yancheng Wang, Senyu Qian, Deqing Mei

MSEC 2023; V001T03A021https://doi.org/10.1115/MSEC2023-106511

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Digital light processing , Manufacturing , Polymers , Silicon carbide ceramics

Fiber-Reinforced Polymer Composites Fabrication Through Acoustic-Assisted 3D Printing Process

Chengyao Xu, Yancheng Wang, Jiawei Liu, Shuo Han, Deqing Mei

MSEC 2023; V001T03A022https://doi.org/10.1115/MSEC2023-106520

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Acoustics , Additive manufacturing , Carbon nanofibers , Fiber reinforced composites , Fibers , Honeycomb structures , Manufacturing , Polymer composites , Surface acoustic waves

Life Cycle Engineering

Combining Agent Based Modeling and System Dynamics to Investigate the Circularity of Plastics

Sandhya Sethuraman, Julien Walzberg, Tapajyoti Ghosh, Taylor Uekert, Alberta Carpenter

MSEC 2023; V001T04A001https://doi.org/10.1115/MSEC2023-101736

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Economics , Modeling , Plastics , Plastics recycling , Recycling , System dynamics

Sustainable 3D Printing of Organ Replica for Endoscopy Training and Medical Research

Barbara Linke, Felicia Fashanu, Kholoud Bashayan, Riddhi Thavi, Anjali A. Roeth

MSEC 2023; V001T04A002https://doi.org/10.1115/MSEC2023-101752

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Biomedicine , Economics , Sustainability

Sustainable Product Design Decision-Making Through Integrated Risk Likelihood and Impact Analyses

Christian Enyoghasi, Fazleena Badurdeen

MSEC 2023; V001T04A003https://doi.org/10.1115/MSEC2023-102037

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Decision making , Product design , Risk , Sustainability

Emissions Avoidance Quantification and Allocation Framework for Secondary Materials Marketplaces Supporting the Circular Economy

Buddhika M. Hapuwatte, Nehika Mathur, K. C. Morris

MSEC 2023; V001T04A004https://doi.org/10.1115/MSEC2023-104125

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Carbon , Economics , Emissions , Greenhouse gases , Manufacturing

Theoretical Method for Characterizing Textile Failure Mechanics in Mechanical Recycling With Carded Drums

Paulo Henrique Teixeira França Alves, Abigail Clarke-Sather, Sam Carlson, Angela Martini

MSEC 2023; V001T04A005https://doi.org/10.1115/MSEC2023-104361

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Failure , Fibers , Manufacturing , Recycling , Textiles

Energy Consumption and Carbon Emissions of Additive Manufacturing Using Smart Materials: A Supply Chain Perspective

Muyue Han, Jing Zhao, Lin Li

MSEC 2023; V001T04A006https://doi.org/10.1115/MSEC2023-104449

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Carbon , Emissions , Energy consumption , Smart materials , Supply chains

Forecasting the Range of Possible Human Hand Movement in Consumer Electronics Disassembly Using Machine Learning

Hao-Yu Liao, Yuhao Chen, Boyi Hu, Xiao Liang, Sara Behdad

MSEC 2023; V001T04A007https://doi.org/10.1115/MSEC2023-104792

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Artificial neural networks , Electronics , Machine learning , Safety , Collaboration , Computers , Errors , Hazardous substances , Human-robot collaboration , Measurement units and standards