Volumes | International Manufacturing Science and Engineering Conference | American Society of Mechanical Engineers Digital Collection

Topics: Iterative learning control , Modeling , Dimensions , Errors , Warping , Additive manufacturing , Algorithms , Engineering prototypes , Extruding , Manufacturing

Non-Planar Slicing Method for Maximizing the Anisotropic Behavior of Continuous Fiber-Reinforced Fused Filament Fabricated Parts

Chih-Yu Chen, Leonard Freißmuth, Suat Mert Altug, David Colin, Matthias Feuchtgruber, Klaus Drechsler

MSEC 2022; V001T01A002https://doi.org/10.1115/MSEC2022-78670

Abstract

View Articletitled, Non-Planar Slicing Method for Maximizing the Anisotropic Behavior of Continuous Fiber-Reinforced Fused Filament Fabricated Parts

PDF

Topics: Additive manufacturing , Anisotropy , Fibers , Manufacturing

Deep Learning-Based Super-Resolution for the Finite Element Analysis of Additive Manufacturing Process

Yi Zhang, Elton Freeman

MSEC 2022; V001T01A003https://doi.org/10.1115/MSEC2022-79992

Abstract

View Articletitled, Deep Learning-Based Super-Resolution for the Finite Element Analysis of Additive Manufacturing Process

PDF

Topics: Additive manufacturing , Finite element analysis , Resolution (Optics)

Multiplexed 3D Printing of Thermoplastics

Jeremy Cleeman, Alex Bogut, Brijesh Mangrolia, Adeline Ripberger, Arad Maghouli, Kunal Kate, Rajiv Malhotra

MSEC 2022; V001T01A004https://doi.org/10.1115/MSEC2022-80882

Abstract

View Articletitled, Multiplexed 3D Printing of Thermoplastics

PDF

Topics: Additive manufacturing , Manufacturing , Resolution (Optics) , Temperature , Bonding , Construction , Engineering simulation , Extruding , Failure , Flow (Dynamics)

A Functionally Gradient NiTi Shape-Memory Alloy Fabricated by Selective Laser Melting

Kun Li, Jianbin Zhan, Ruijin Ma, Yingzhi Ren, Jinxin Lin

MSEC 2022; V001T01A005https://doi.org/10.1115/MSEC2022-83645

Abstract

View Articletitled, A Functionally Gradient NiTi Shape-Memory Alloy Fabricated by Selective Laser Melting

PDF

Topics: Lasers , Melting , Nickel titanium alloys , Printing , Shape memory alloys

1D and 2D Nanoparticle Assembly Compliant With Tuned 3D-Printed Topology

Sayli Jambhulkar, Kenan Song

MSEC 2022; V001T01A006https://doi.org/10.1115/MSEC2022-85050

Abstract

View Articletitled, 1D and 2D Nanoparticle Assembly Compliant With Tuned 3D-Printed Topology

PDF

Topics: Additive manufacturing , Manufacturing , Nanoparticles , Topology

One-Step 3D Printed Layers Along With xy-in Plane Directions for Enhanced Multifunctional Nanocomposites

Dharneedar Ravichandran, Kenan Song

MSEC 2022; V001T01A007https://doi.org/10.1115/MSEC2022-85056

Abstract

View Articletitled, One-Step 3D Printed Layers Along With xy-in Plane Directions for Enhanced Multifunctional Nanocomposites

PDF

Topics: Additive manufacturing , Composite materials , Nanocomposites , Nanoparticles , Polymers

Physics-Informed Artificial Intelligence for Temperature Prediction in Metal Additive Manufacturing: A Comparative Study

Suyog Ghungrad, Benjamin Gould, Sarah Wolff, Azadeh Haghighi

MSEC 2022; V001T01A008https://doi.org/10.1115/MSEC2022-85159

Abstract

View Articletitled, Physics-Informed Artificial Intelligence for Temperature Prediction in Metal Additive Manufacturing: A Comparative Study

PDF

Topics: Additive manufacturing , Artificial intelligence , Artificial neural networks , Metals , Physics , Temperature

Characterization of Polylactic Acid Filament With Biodegradable Hemp Fiber Infused During Additive Manufacturing Process

Matthew Hanson, Che-Hao Yang

MSEC 2022; V001T01A009https://doi.org/10.1115/MSEC2022-85176

Abstract

View Articletitled, Characterization of Polylactic Acid Filament With Biodegradable Hemp Fiber Infused During Additive Manufacturing Process

PDF

Topics: Additive manufacturing , Biodegradation , Composite materials , Electromagnetic pulse , Fibers , Manufacturing

A Comparative Study on the Effects of an Advanced Scan Pattern and Intelligent Scan Sequence on Thermal Distribution, Part Deformation, and Printing Time in PBF Additive Manufacturing

Chuan He, Yueh-Lin Tsai, Chinedum E. Okwudire

MSEC 2022; V001T01A010https://doi.org/10.1115/MSEC2022-85301

Abstract

View Articletitled, A Comparative Study on the Effects of an Advanced Scan Pattern and Intelligent Scan Sequence on Thermal Distribution, Part Deformation, and Printing Time in PBF Additive Manufacturing

PDF

Topics: Additive manufacturing , Deformation , Optimization , Printing

Tiling of Cellular Structures Into 3D Parts According to the Density Values of SIMP Topology Optimization

Damla Ozkapici Helvaci, Ulas Yaman

MSEC 2022; V001T01A011https://doi.org/10.1115/MSEC2022-85307

Abstract

View Articletitled, Tiling of Cellular Structures Into 3D Parts According to the Density Values of SIMP Topology Optimization

PDF

Topics: Density , Optimization , Topology

Improving Geometric Accuracy in Wire and Arc Additive Manufacturing With Engineering-Informed Machine Learning

Cesar Ruiz, Davoud Jafari, Vignesh Venkata Subramanian, Tom H. J. Vaneker, Wei Ya, Qiang Huang

MSEC 2022; V001T01A012https://doi.org/10.1115/MSEC2022-85325

Abstract

View Articletitled, Improving Geometric Accuracy in Wire and Arc Additive Manufacturing With Engineering-Informed Machine Learning

PDF

Topics: Additive manufacturing , Machine learning , Shapes , Wire

Surface Roughness Prediction for Additively Manufactured Ti-6Al-4V Components Based on Supervised Learning Models

Varad Maitra, Jing Shi

MSEC 2022; V001T01A013https://doi.org/10.1115/MSEC2022-85329

Abstract

View Articletitled, Surface Roughness Prediction for Additively Manufactured Ti-6Al-4V Components Based on Supervised Learning Models

PDF

Topics: Additive manufacturing , Alloys , Artificial neural networks , Lasers , Melting , Surface roughness

A Deterministic Inspection of Surface Preparation for Metalization

Shiva Shokri, Pooria Sedigh, Mehdi Hojjati, Tsz-Ho Kwok

MSEC 2022; V001T01A014https://doi.org/10.1115/MSEC2022-85334

Abstract

View Articletitled, A Deterministic Inspection of Surface Preparation for Metalization

PDF

Topics: Inspection , Surface preparation , Blasting , Coating processes , Coatings , Composite materials , Metals , Resins , Manufacturing , Microscopes

3D Printing of Eco-Friendly Artificial Martian Clay (JMSS-1) for In-Situ Resource Utilization on Mars

Avishek Ghosh, Jean-Jacques Favier

MSEC 2022; V001T01A015https://doi.org/10.1115/MSEC2022-85353

Abstract

View Articletitled, 3D Printing of Eco-Friendly Artificial Martian Clay (JMSS-1) for In-Situ Resource Utilization on Mars

PDF

Topics: Additive manufacturing , Soil

Development of an In-House Customized Perfusion-Based Bioreactor for 3D Cell Culture

Amar Abbatiello, Md Ahasan Habib

MSEC 2022; V001T01A016https://doi.org/10.1115/MSEC2022-85374

Abstract

View Articletitled, Development of an In-House Customized Perfusion-Based Bioreactor for 3D Cell Culture

PDF

Topics: Bioreactors

Separation Process Comparison of Hydrogel Film and PTFE Film in Vat Photopolymerization

Feimo Yang, Aamer Kazi, Caleb Liu, Bruce L. Tai

MSEC 2022; V001T01A017https://doi.org/10.1115/MSEC2022-85380

Abstract

View Articletitled, Separation Process Comparison of Hydrogel Film and PTFE Film in Vat Photopolymerization

PDF

Topics: Hydrogels , Separation (Technology)

Support Vector Machines for Classification of Direct Energy Deposition Standoff Distance for Improved Process Control

Zoe Alexander, Nathan DeVol, Molly Emig, Kyle Saleeby, Thomas Feldhausen, Thomas Kurfess, Katherine Fu, Christopher Saldana

MSEC 2022; V001T01A018https://doi.org/10.1115/MSEC2022-85382

Abstract

View Articletitled, Support Vector Machines for Classification of Direct Energy Deposition Standoff Distance for Improved Process Control

PDF

Topics: Process control , Support vector machines

Effect of Powder Layer Thickness on Residual Stress in Laser Powder Bed Fusion of IN718

Elham Mirkoohi, Hong-Chuong Tran, Yu-Lung Lo, You-Cheng Chang, Hung-You Lin, Steven Y. Liang

MSEC 2022; V001T01A019https://doi.org/10.1115/MSEC2022-85391

Abstract

View Articletitled, Effect of Powder Layer Thickness on Residual Stress in Laser Powder Bed Fusion of IN718

PDF

Topics: Additive manufacturing , Lasers , Stress

Acoustic Process Monitoring of Contact Tip to Work Piece Distance in Wire Arc Additive Manufacturing by Random Forest Algorithms

Dylan Hebert, Austen Thien, Christopher Saldana

MSEC 2022; V001T01A020https://doi.org/10.1115/MSEC2022-85404

Abstract

View Articletitled, Acoustic Process Monitoring of Contact Tip to Work Piece Distance in Wire Arc Additive Manufacturing by Random Forest Algorithms

PDF

Topics: Acoustics , Additive manufacturing , Algorithms , Machine learning , Process monitoring , Wire

Characterization of the Direct Write Inkjet Printing Process for Automated Fabrication of PEDOT: PSS Thin Films

Sara Morice, Andriy Sherehiy, Danming Wei, Dan O. Popa

MSEC 2022; V001T01A021https://doi.org/10.1115/MSEC2022-85409

Abstract

View Articletitled, Characterization of the Direct Write Inkjet Printing Process for Automated Fabrication of PEDOT: PSS Thin Films

PDF

Topics: Additive manufacturing , Experimental design , Manufacturing , Polymers , Printing , Thin films

Design and Manufacturing of a Functionally Graded Porous Dental Implant

Rana Dabaja, Bogdan I. Popa, Sun-Yung Bak, Gustavo Mendonca, Mihaela Banu

MSEC 2022; V001T01A022https://doi.org/10.1115/MSEC2022-85426

Abstract

View Articletitled, Design and Manufacturing of a Functionally Graded Porous Dental Implant

PDF

Topics: Additive manufacturing , Design , Manufacturing , Bone , Diseases , Melting , Resolution (Optics) , Disks , Failure , Geometry

Investigation of the Mechanical Properties of Additively Manufactured Bone Tissue Scaffolds, Composed of Polyamide, Polyolefin, and Cellulose Fibers

Paavana Krishna Mandava, Robert Joyce, James B. Day, Roozbeh (Ross) Salary

MSEC 2022; V001T01A023https://doi.org/10.1115/MSEC2022-85435

Abstract

View Articletitled, Investigation of the Mechanical Properties of Additively Manufactured Bone Tissue Scaffolds, Composed of Polyamide, Polyolefin, and Cellulose Fibers

PDF

Topics: Additive manufacturing , Biomedicine , Bone , Cellulosic fibers , Mechanical properties

Mechanical Profile and 3D Printability of Cellular Structures

Sina Rastegarzadeh, Samuel Muthusamy, Jida Huang

MSEC 2022; V001T01A024https://doi.org/10.1115/MSEC2022-85541

Abstract

View Articletitled, Mechanical Profile and 3D Printability of Cellular Structures

PDF

Topics: Anisotropy , Bulk modulus , Databases , Design , Manufacturing , Mechanical properties , Metamaterials , Microscale devices , Shear modulus , Structural design

Polymer Filament Extrusion Using LDPE Waste Polymer: Effect of Processing Temperature

Rajdeep Singh Devra, Nishkarsh Srivastava, Madhu Vadali, Amit Arora

MSEC 2022; V001T01A025https://doi.org/10.1115/MSEC2022-85586

Abstract

View Articletitled, Polymer Filament Extrusion Using LDPE Waste Polymer: Effect of Processing Temperature

PDF

Topics: Additive manufacturing , Extruding , Low density polyethylene , Modeling , Plastic scrap , Polymers , Recycling , Temperature

Controlled Wetting of Spread Powder and its Impact on Line Formation in Binder Jetting

Colton Inkley, David Martin, Brennen Clark, Nathan Crane

MSEC 2022; V001T01A026https://doi.org/10.1115/MSEC2022-85603

Abstract

View Articletitled, Controlled Wetting of Spread Powder and its Impact on Line Formation in Binder Jetting

PDF

Topics: Binders (Materials) , Wetting

Additive Manufacturing of Novel Beam Lattice Metamaterials With Hollow Cross-Sections Towards High Stiffness/Strength-to-Weight Ratio

Md Humaun Kobir, Xin Liu, Yiran Yang, Fang Jiang

MSEC 2022; V001T01A027https://doi.org/10.1115/MSEC2022-85627

Abstract

View Articletitled, Additive Manufacturing of Novel Beam Lattice Metamaterials With Hollow Cross-Sections Towards High Stiffness/Strength-to-Weight Ratio

PDF

Topics: Additive manufacturing , Cross section (Physics) , Lasers , Metamaterials , Sintering , Stiffness , Weight (Mass)

3D Printing of Salvinia Water Fern-Inspired Superhydrophobic Structures

Qingqing He, Brandon Bethers, Brian Tran, Yang Yang

MSEC 2022; V001T01A028https://doi.org/10.1115/MSEC2022-85646

Abstract

View Articletitled, 3D Printing of Salvinia Water Fern-Inspired Superhydrophobic Structures

PDF

Topics: Additive manufacturing , Biomimetics , Water

Numerical Studies on Cold Spray Particle Deposition Using a Rectangular Nozzle

Ted Gabor, Semih Akin, Jung-Ting Tsai, Seunghwan Jo, Feraas Al-Najjar, Martin Byung-Guk Jun

MSEC 2022; V001T01A029https://doi.org/10.1115/MSEC2022-85673

Abstract

View Articletitled, Numerical Studies on Cold Spray Particle Deposition Using a Rectangular Nozzle

PDF

Topics: Additive manufacturing , Computer simulation , Nozzles , Particulate matter , Polymers , Sprays

Smart Resin Vat: Real-Time Detecting Failures, Defects, and Curing Area in Vat Photopolymerization 3D Printing

Yujie Shan, Aravind Krishnakumar, Zehan Qin, Huachao Mao

MSEC 2022; V001T01A030https://doi.org/10.1115/MSEC2022-85691

Abstract

View Articletitled, Smart Resin Vat: Real-Time Detecting Failures, Defects, and Curing Area in Vat Photopolymerization 3D Printing

PDF

Topics: Additive manufacturing , Failure , Hardening (Curing) , Machine learning , Resins

A Surface Roughness Characterization Method for Additively Manufactured Products

Andi Wang, Davoud Jafari, Tom H. J. Vaneker, Qiang Huang

MSEC 2022; V001T01A031https://doi.org/10.1115/MSEC2022-85697

Abstract

View Articletitled, A Surface Roughness Characterization Method for Additively Manufactured Products

PDF

Topics: Additive manufacturing , Surface roughness

Robot Trajectory Generation for Multi-Axis Wire Arc Additive Manufacturing

Prahar M. Bhatt, Zachary McNulty, Satyandra K. Gupta

MSEC 2022; V001T01A032https://doi.org/10.1115/MSEC2022-85701

Abstract

View Articletitled, Robot Trajectory Generation for Multi-Axis Wire Arc Additive Manufacturing

PDF

Topics: Additive manufacturing , Robots , Trajectories (Physics) , Wire , Manipulators , Metals , Sensors , Arc welding , Composite materials

Fused Deposition Modeling of Carbon Fiber Reinforced High-Density Polyethylene: Effects on Microstructure and Mechanical Properties

Partha Pratim Pandit, Chang Liu, Giancarlo Corti, Yingbin Hu

MSEC 2022; V001T01A033https://doi.org/10.1115/MSEC2022-85702

Abstract

View Articletitled, Fused Deposition Modeling of Carbon Fiber Reinforced High-Density Polyethylene: Effects on Microstructure and Mechanical Properties

PDF

Topics: Carbon fibers , Composite materials , Density , Mechanical properties , Modeling , Tensile strength

Analytical Study of Shear-Thinning Fluid Flow in Direct Ink Writing Process

Zipeng Guo, Fan Fei, Xuan Song, Chi Zhou

MSEC 2022; V001T01A034https://doi.org/10.1115/MSEC2022-85747

Abstract

View Articletitled, Analytical Study of Shear-Thinning Fluid Flow in Direct Ink Writing Process

PDF

Topics: Additive manufacturing , Computational fluid dynamics , Fluid dynamics , Inks , Nozzles , Shear (Mechanics)

Nanoporous Carbon Nanotube Coating for 3D Printing of High-Performance Continuous Fiber Reinforced Polymer Composites

John M. Pappas, Xiangyang Dong

MSEC 2022; V001T01A035https://doi.org/10.1115/MSEC2022-85758

Abstract

View Articletitled, Nanoporous Carbon Nanotube Coating for 3D Printing of High-Performance Continuous Fiber Reinforced Polymer Composites

PDF

Topics: Additive manufacturing , Carbon fibers , Carbon nanotubes , Coatings , Electrophoretic deposition , Fibers , Polymer composites

Characterization of Stress Shielding in Pressure-Assisted Ceramic Binder Jetting

Levi Kirby, Fan Fei, Xuan Song

MSEC 2022; V001T01A036https://doi.org/10.1115/MSEC2022-85766

Abstract

View Articletitled, Characterization of Stress Shielding in Pressure-Assisted Ceramic Binder Jetting

PDF

Topics: Binders (Materials) , Ceramics , Pressure , Stress , Density , Inks , Compacting , Packing (Shipments) , Packings (Cushioning) , Printing

Process Optimization for Hydrothermal-Assisted Jet Fusion Additive Manufacturing of Ceramics

Fan Fei, Levi Kirby, Xuan Song

MSEC 2022; V001T01A037https://doi.org/10.1115/MSEC2022-85772

Abstract

View Articletitled, Process Optimization for Hydrothermal-Assisted Jet Fusion Additive Manufacturing of Ceramics

PDF

Topics: Additive manufacturing , Binders (Materials) , Ceramics , Inks , Optimization

Modeling Maximum Stresses in Each Layer for Layer-by-Layer Deposition of the Direct Metal Laser Sintering Process for Different Scanning Patterns

Joseph Tang, Hayri Sezer, Nazmul Ahsan, Hossain Ahmed, Sudhir Kaul

MSEC 2022; V001T01A038https://doi.org/10.1115/MSEC2022-85777

Abstract

View Articletitled, Modeling Maximum Stresses in Each Layer for Layer-by-Layer Deposition of the Direct Metal Laser Sintering Process for Different Scanning Patterns

PDF

Topics: Lasers , Metals , Modeling , Sintering , Stress

A Modified Schlieren System for In-Situ Voxel Growth Observation in Projection-Based Stereolithography Process

Aditya Chivate, Chi Zhou

MSEC 2022; V001T01A039https://doi.org/10.1115/MSEC2022-85787

Abstract

View Articletitled, A Modified Schlieren System for In-Situ Voxel Growth Observation in Projection-Based Stereolithography Process

PDF

Topics: Mask image projection stereolithography , Refractive index , Schlieren methods , Optics , Additive manufacturing , Deflection , Density , Engineering simulation , Lithography , Magnification

3D Printing of Designed Ultra-Low Loss Microwave Dielectrics for Beyond 5G Applications

Avishek Ghosh

MSEC 2022; V001T01A040https://doi.org/10.1115/MSEC2022-85805

Abstract

View Articletitled, 3D Printing of Designed Ultra-Low Loss Microwave Dielectrics for Beyond 5G Applications

PDF

Topics: Additive manufacturing , Ceramics , Dielectric materials , Microwaves

Shape Memory Properties of 4D Printed Parts Under Cyclic Loading: Effects of Infill Characteristics and Stimulus Conditions

Muyue Han, Jing Zhao, Lin Li, Miao Tan

MSEC 2022; V001T01A041https://doi.org/10.1115/MSEC2022-85825

Abstract

View Articletitled, Shape Memory Properties of 4D Printed Parts Under Cyclic Loading: Effects of Infill Characteristics and Stimulus Conditions

PDF

Topics: Printing , Shape memory properties , Thermomechanics , Shapes , Operating temperature , Additive manufacturing , Cycles , Experimental analysis , Glass transition , Manufacturing

Effects of Stimulus Conditions on Shape Memory Cycle Durability of 4D Printed Parts in Stereolithography Additive Manufacturing

Jing Zhao, Muyue Han, Lin Li, Miao Tan

MSEC 2022; V001T01A042https://doi.org/10.1115/MSEC2022-85830

Abstract

View Articletitled, Effects of Stimulus Conditions on Shape Memory Cycle Durability of 4D Printed Parts in Stereolithography Additive Manufacturing

PDF

Topics: Additive manufacturing , Cycles , Durability , Printing , Shapes , Stereolithography , Thermomechanics

A Shape Registration Methodology for Geometric Deviation Correction in Additive Manufacturing

Yuanxiang Wang, Cesar Ruiz, Sanglok Park, Kyeong-Ho Shin, Joo-Hyung Kim, Qiang Huang

MSEC 2022; V001T01A043https://doi.org/10.1115/MSEC2022-85846

Abstract

View Articletitled, A Shape Registration Methodology for Geometric Deviation Correction in Additive Manufacturing

PDF

Topics: Additive manufacturing , Shapes

Assessment of Shape Descriptors for Distortion Prediction in Powder Bed Fusion Process

Hemnath Anandan Kumar, Senthilkumaran Kumaraguru

MSEC 2022; V001T01A044https://doi.org/10.1115/MSEC2022-86089

Abstract

View Articletitled, Assessment of Shape Descriptors for Distortion Prediction in Powder Bed Fusion Process

PDF

Topics: Additive manufacturing , Shapes

Hybrid Modeling the Influence of Post Processing Heat Treatments on the Strengthening Mechanisms of Additively Manufactured Inconel 718

Ala’aldin Alafaghani, Majed Ali, Abdalmageed Almotari, Jian-Qiao Sun, Ala Qattawi

MSEC 2022; V001T01A045https://doi.org/10.1115/MSEC2022-86354

Abstract

View Articletitled, Hybrid Modeling the Influence of Post Processing Heat Treatments on the Strengthening Mechanisms of Additively Manufactured Inconel 718

PDF

Topics: Additive manufacturing , Heat , Modeling , Alloys , Mechanical behavior , Reliability

Biomanufacturing

Experimental and Numerical Investigation of Short-Term Bio-Degradation Behavior of 3D Printed PLA

Recep Ilhan, Safa Senaysoy, Huseyin Lekesiz

MSEC 2022; V001T02A001https://doi.org/10.1115/MSEC2022-80573

Abstract

View Articletitled, Experimental and Numerical Investigation of Short-Term Bio-Degradation Behavior of 3D Printed PLA

PDF

Topics: Additive manufacturing , Biodegradation , Biomaterials , Computer simulation , Water , Polymers , Stiffness , Weight (Mass) , Water absorption , Biodegradable materials

3D Printed Pelvic Organ Prolapse (POP) Tissue Scaffolds

Yuxiang Zhu, Dharneedar Ravichandran, Kenan Song

MSEC 2022; V001T02A002https://doi.org/10.1115/MSEC2022-85062

Abstract

View Articletitled, 3D Printed Pelvic Organ Prolapse (POP) Tissue Scaffolds

PDF

Topics: Additive manufacturing , Biocompatible polymers , Biological tissues , Ethanol , Manufacturing , Package on package , Tissue scaffolds , Food and Drug Administration , Risk , Surgery

Developing Hybrid Hydrogels for Full-Scale Scaffold Fabrication Using Extrusion-Based Bioprinting Process

Cartwright Nelson, Slesha Tuladhar, MD Ahasan Habib

MSEC 2022; V001T02A003https://doi.org/10.1115/MSEC2022-85372

Abstract

View Articletitled, Developing Hybrid Hydrogels for Full-Scale Scaffold Fabrication Using Extrusion-Based Bioprinting Process

PDF

Topics: Bioprinting , Extruding , Hydrogels , Manufacturing , Rheology

Investigation of the Influence of Hydroxyapatite and Polysaccharide Concentration on the Mechanical Properties of Bone Scaffolds, Fabricated Using Freeze Drying Process

Tanner Ekstrom, James B. Day, Roozbeh (Ross) Salary

MSEC 2022; V001T02A004https://doi.org/10.1115/MSEC2022-85437

Abstract

View Articletitled, Investigation of the Influence of Hydroxyapatite and Polysaccharide Concentration on the Mechanical Properties of Bone Scaffolds, Fabricated Using Freeze Drying Process

PDF

Topics: Biomedicine , Bone , Drying , Manufacturing , Mechanical properties

A Novel Objective Function for the Inverse Problem of Simultaneous Identification of Unknown Youngs Modulus and Boundary Conditions With Noisy and Partial Observation

Tian Xu, Shilun Du, Murong Li, Yingda Hu, Zhen Wang, Yong Lei

MSEC 2022; V001T02A005https://doi.org/10.1115/MSEC2022-85516

Abstract

View Articletitled, A Novel Objective Function for the Inverse Problem of Simultaneous Identification of Unknown Youngs Modulus and Boundary Conditions With Noisy and Partial Observation

PDF

Topics: Boundary-value problems , Inverse problems

3D Co-Printability of PCL and Hybrid Hydrogels

Connor Quigley, Md Ahasan Habib

MSEC 2022; V001T02A006https://doi.org/10.1115/MSEC2022-85685

Abstract

View Articletitled, 3D Co-Printability of PCL and Hybrid Hydrogels

PDF

Topics: Bioprinting , Hydrogels , Mechanical properties , Shapes

A Neural Network-Based Framework of Real-Time Heat Map Generation for Surgical Hand-Held Drilling

Pei-Ching Kung, Mahtab Heydari, Bruce L. Tai

MSEC 2022; V001T02A007https://doi.org/10.1115/MSEC2022-85693

Abstract

View Articletitled, A Neural Network-Based Framework of Real-Time Heat Map Generation for Surgical Hand-Held Drilling

PDF

Topics: Artificial neural networks , Drilling , Heat , Surgery , Time-invariant systems

Pre-Crosslinked Hybrid Hydrogels for 3D Bio-Printing Process: Rheological Analysis

Slesha Tuladhar, Cartwright Nelson, Md Ahasan Habib

MSEC 2022; V001T02A008https://doi.org/10.1115/MSEC2022-85700

Abstract

View Articletitled, Pre-Crosslinked Hybrid Hydrogels for 3D Bio-Printing Process: Rheological Analysis

PDF

Topics: Bioprinting , Hydrogels , Printing , Rheology

Design and Analysis of a Novel Experiment Platform for 3D Needle Insertion Based on Orthogonally Arranged Dual Camera

Shilun Du, Murong Li, Tian Xu, Yingda Hu, Zhen Wang, Yong Lei

MSEC 2022; V001T02A009https://doi.org/10.1115/MSEC2022-85764

Abstract

View Articletitled, Design and Analysis of a Novel Experiment Platform for 3D Needle Insertion Based on Orthogonally Arranged Dual Camera

PDF

Topics: Design , Needles

Design and Fabrication of MRI-Compatible and Flexible Neural Microprobes for Deep Brain Stimulation and Neurological Treatment Applications

Yi Wang, Sung-Ho Lee, Yen-Yu Ian Shih, Yuan-Shin Lee

MSEC 2022; V001T02A010https://doi.org/10.1115/MSEC2022-85832

Abstract

View Articletitled, Design and Fabrication of MRI-Compatible and Flexible Neural Microprobes for Deep Brain Stimulation and Neurological Treatment Applications

PDF

Topics: Brain , Design , Magnetic resonance imaging , Manufacturing , Nervous system

Manufacturing of the Eriedescent Sterilizing Device

A. Sharifbaev, R. Mamidi, M. R. Gottimukkula, M. Gacura, G. Vanderlaan, X. Ji, D. Piovesan

MSEC 2022; V001T02A011https://doi.org/10.1115/MSEC2022-86032

Abstract

View Articletitled, Manufacturing of the Eriedescent Sterilizing Device

PDF

Topics: Decontamination , Design , Dynamics (Mechanics) , Emergencies , Fibers , Filtration , Food and Drug Administration , Heat , Instrumentation , Irradiation (Radiation exposure)

Life Cycle Engineering

An Approach to Extend the Digital Thread From Requirements to Model Geometry

Jiwei Zhou, Jorge D. Camba, Nathan Hartman, Zhongtian Li

MSEC 2022; V001T03A001https://doi.org/10.1115/MSEC2022-80857

Abstract

View Articletitled, An Approach to Extend the Digital Thread From Requirements to Model Geometry

PDF

Topics: Computer-aided design , Geometry , Life cycle assessment , Thread , Design , Product development , Cycles , Design engineering , Flow (Dynamics) , Life cycle management

The Effect of Composition, Geometry and a Novel Tool Design on Metal Recovery During Aluminum Process Scrap Remelting

Jiankan Liao, Ashvin Sharma, Daniel Cooper

MSEC 2022; V001T03A002https://doi.org/10.1115/MSEC2022-84900

Abstract

View Articletitled, The Effect of Composition, Geometry and a Novel Tool Design on Metal Recovery During Aluminum Process Scrap Remelting

PDF

Topics: Aluminum , Design , Geometry , Machining , Magnesium (Metal) , Metals , Recycling

Product Life-Cycle Energy Framework in Friction Scenarios

Barbara S. Linke, Shivam Gupta

MSEC 2022; V001T03A003https://doi.org/10.1115/MSEC2022-85263

Abstract

View Articletitled, Product Life-Cycle Energy Framework in Friction Scenarios

PDF

Topics: Cycles , Friction , Product quality , Sustainability

Optimization-Based Disassembly Sequence Planning Under Uncertainty for Human-Robot Collaboration

Hao-yu Liao, Yuhao Chen, Boyi Hu, Sara Behdad

MSEC 2022; V001T03A004https://doi.org/10.1115/MSEC2022-85383

Abstract

View Articletitled, Optimization-Based Disassembly Sequence Planning Under Uncertainty for Human-Robot Collaboration

PDF

Topics: Human-robot collaboration , Optimization , Uncertainty

Automatic Screw Detection and Tool Recommendation System for Robotic Disassembly

Xinyao Zhang, Kareem Eltouny, Xiao Liang, Sara Behdad

MSEC 2022; V001T03A005https://doi.org/10.1115/MSEC2022-85403

Abstract

View Articletitled, Automatic Screw Detection and Tool Recommendation System for Robotic Disassembly

PDF

Topics: Robotics , Screws

Electric Vehicle Battery End-Of-Use Recovery Management: Degradation Prediction and Decision Making

Yixin Zhao, Sara Behdad

MSEC 2022; V001T03A006https://doi.org/10.1115/MSEC2022-85536

Abstract

View Articletitled, Electric Vehicle Battery End-Of-Use Recovery Management: Degradation Prediction and Decision Making

PDF

Topics: Active materials , Batteries , Decision making , Economics , Electric vehicle batteries , Electric vehicles , Electrodes , Lithium-ion batteries , Maintenance , NASA

Manufacturing Equipment and Automation

Estimating Milling Forces From Vibration Measurements

Manish Joddar, Keivan Ahmadi

MSEC 2022; V001T04A001https://doi.org/10.1115/MSEC2022-85157

Abstract

View Articletitled, Estimating Milling Forces From Vibration Measurements

PDF

Topics: Milling , Vibration measurement , Machining , Vibration , Kalman filters , Process monitoring , Signals , Accelerometers , Cutting , Force sensors

Micro-Architected Lattice-Based Mesh for Fiber Filters: A Novel Additive Manufacturing Architecture for Molded Fiber Tooling

Jose Dominguez, Paloma Gonzalez

MSEC 2022; V001T04A002https://doi.org/10.1115/MSEC2022-85305

Abstract

View Articletitled, Micro-Architected Lattice-Based Mesh for Fiber Filters: A Novel Additive Manufacturing Architecture for Molded Fiber Tooling

PDF

Topics: Additive manufacturing , Fibers , Filters , Tooling

Enhanced Three-Dimensional Surface Profiling Technique Based on a Feature-Selective Segmentation and Merging

Xiangyu Guo, ChaBum Lee

MSEC 2022; V001T04A003https://doi.org/10.1115/MSEC2022-85343

Abstract

View Articletitled, Enhanced Three-Dimensional Surface Profiling Technique Based on a Feature-Selective Segmentation and Merging

PDF

Topics: Image segmentation , Imaging , Resolution (Optics)

Machine Vision Tracking and Automation of a Microrobot (sAFAM)

Colin Warn, Andriy Sherehiy, Moath Alqatamin, Brooke Ritz, Ruoshi Zhang, Sri S. Chowdhury, Danming Wei, Dan O. Popa

MSEC 2022; V001T04A004https://doi.org/10.1115/MSEC2022-85424

Abstract

View Articletitled, Machine Vision Tracking and Automation of a Microrobot (sAFAM)

PDF

Topics: Machinery , Manufacturing

Vision-Sensor Fusion-Based Low-Cost Dimension Measurement System for Machining Shop Floor

Swarit Anand Singh, Aitha Sudheer Kumar, Pratik C. Sorathiya, K. A. Desai

MSEC 2022; V001T04A005https://doi.org/10.1115/MSEC2022-85442

Abstract

View Articletitled, Vision-Sensor Fusion-Based Low-Cost Dimension Measurement System for Machining Shop Floor

PDF

Topics: Dimensions , Machinery , Machining , Measurement systems , Sensors

Research on Synchronous Control Strategy of Dual-Drive Feed System Based on Fuzzy PID Control

Ben Wang, Hong Lu, Qi Liu, Shaojun Wang, Hengchen Pan, Jiashun Dai

MSEC 2022; V001T04A006https://doi.org/10.1115/MSEC2022-85458

Abstract

View Articletitled, Research on Synchronous Control Strategy of Dual-Drive Feed System Based on Fuzzy PID Control

PDF

Topics: Computer numerical control machine tools , Computers , Errors , Fuzzy control , Machine tools , Machining , Robustness , Servomechanisms , Simulation results , Stress

Trajectory Control of 6-DOF Welding Robot Based on STM32

Dingzhong Li, Hong Lu, Yongquan Zhang, Zidong Wu, He Huang, Meng Liu, Shaojun Wang

MSEC 2022; V001T04A007https://doi.org/10.1115/MSEC2022-85494

Abstract

View Articletitled, Trajectory Control of 6-DOF Welding Robot Based on STM32

PDF

Topics: Algorithms , Robots , Trajectories (Physics) , Welding

Dynamic Simulation Analysis of Multi-Support Rotary Shaft System

Jiangnuo Mei, Yinhuan Zheng, Hong Lu, Zhangjie Li, Wei Zhang, Di Peng, Huang Lin, Qiong Liu

MSEC 2022; V001T04A008https://doi.org/10.1115/MSEC2022-85515

Abstract

View Articletitled, Dynamic Simulation Analysis of Multi-Support Rotary Shaft System

PDF

Topics: Collisions (Physics) , Dynamic analysis , Friction , Simulation analysis , Ships , Propulsion , Brakes , Flaw detection , Stress , Computer software

Machine Setup Abnormality Detection Using Machine Vision and Deep Learning

Sahil J. Choudhari, Swarit Anand Singh, Aitha Sudheer Kumar, K. A. Desai

MSEC 2022; V001T04A009https://doi.org/10.1115/MSEC2022-85519

Abstract

View Articletitled, Machine Setup Abnormality Detection Using Machine Vision and Deep Learning

PDF

Topics: Machinery

Analysis of Dynamic Parameter for Gantry Mobile-Type Dual-Drive Machine

Min Hu, Hong Lu, Qi Liu, Jiashun Dai, Ben Wang, Shaojun Wang

MSEC 2022; V001T04A010https://doi.org/10.1115/MSEC2022-85526

Abstract

View Articletitled, Analysis of Dynamic Parameter for Gantry Mobile-Type Dual-Drive Machine

PDF

Topics: Gravity (Force) , Machinery

A Novel Welding Method for Repairing Surface Defects of Large-Type Rotary Machinery Based on Line Structured Light Detection

Hao Fu, Hong Lu, Yongquan Zhang, Zidong Wu, He Huang, Shijie Liu, Shaojun Wang

MSEC 2022; V001T04A011https://doi.org/10.1115/MSEC2022-85527

Abstract

View Articletitled, A Novel Welding Method for Repairing Surface Defects of Large-Type Rotary Machinery Based on Line Structured Light Detection

PDF

Topics: Machinery , Maintenance , Robots , Sensors , Trajectories (Physics) , Welding

Precision Evaluation of Large Payload SCARA Robot for PCB Assembly

Andrew S. Nimon, Andriy Sherehiy, Moath Alqatamin, Danming Wei, Dan O. Popa

MSEC 2022; V001T04A012https://doi.org/10.1115/MSEC2022-85534

Abstract

View Articletitled, Precision Evaluation of Large Payload SCARA Robot for PCB Assembly

PDF

Topics: Printed circuit board assemblies , Robots , Manufacturing , Errors , Micromanufacturing , Robotics , Surface mount devices , Visual servoing

Research on Positioning Error of Dual-Drive Feed System Based on Virtual Axis-Electronic Cam Strategy

Zhanyun Deng, Hong Lu, Qi Liu, Lanqi Meng, Jiashun Dai, Qiong Liu

MSEC 2022; V001T04A013https://doi.org/10.1115/MSEC2022-85540

Abstract

View Articletitled, Research on Positioning Error of Dual-Drive Feed System Based on Virtual Axis-Electronic Cam Strategy

PDF

Topics: Errors , Modeling

Effect of Inherently Porous Structure Produced by Metal Fused Filament Fabrication on the Tribological Behavior of Lubricated Steel-Steel Contact

Rui Liu, Andrew Greeley, Shuhuan Zhang, Denis Cormier, Patricia Iglesias Victoria

MSEC 2022; V001T04A014https://doi.org/10.1115/MSEC2022-85584

Abstract

View Articletitled, Effect of Inherently Porous Structure Produced by Metal Fused Filament Fabrication on the Tribological Behavior of Lubricated Steel-Steel Contact

PDF

Topics: Friction , Manufacturing , Metals , Steel , Tribology , Wear

Review of KEI Method-Based Dimensional Measurement, Positioning Control and Part Inspection

Zhikun Wang, ChaBum Lee

MSEC 2022; V001T04A015https://doi.org/10.1115/MSEC2022-85660

Abstract

View Articletitled, Review of KEI Method-Based Dimensional Measurement, Positioning Control and Part Inspection

PDF

Topics: Dimensional metrology , Inspection , Interferometry , Position control

Real-Time Structured Light Scanning Characterization of Surface Topography of Direct Energy Deposited 316L Stainless Steel

Weijun Shen, Xing Zhang, Yiliang Liao, Beiwen Li

MSEC 2022; V001T04A016https://doi.org/10.1115/MSEC2022-85783

Abstract

View Articletitled, Real-Time Structured Light Scanning Characterization of Surface Topography of Direct Energy Deposited 316L Stainless Steel

PDF

Topics: Stainless steel , Surface topography , Additive manufacturing , Lasers , Design , Durability , Inspection , Metrology , Optimization , Printing

In-Process Machining Process Monitoring Method Based on Impedance Model of Dielectric Coating Layer at Tool-Chip Interface

Heebum Chun, Jungsub Kim, Jungsoo Nam, Songhyun Ju, ChaBum Lee

MSEC 2022; V001T04A017https://doi.org/10.1115/MSEC2022-85794

Abstract

View Articletitled, In-Process Machining Process Monitoring Method Based on Impedance Model of Dielectric Coating Layer at Tool-Chip Interface

PDF

Topics: Coating processes , Coatings , Machining , Process monitoring

CFRP Milling and Drilling Process Monitoring by Using a Spindle-Integrated Three Axis Force Sensor

Jungsub Kim, Heebum Chun, ChaBum Lee

MSEC 2022; V001T04A018https://doi.org/10.1115/MSEC2022-85799

Abstract

View Articletitled, CFRP Milling and Drilling Process Monitoring by Using a Spindle-Integrated Three Axis Force Sensor

PDF

Topics: Carbon , Carbon reinforced plastics , Cutting , Drilling , Fiber reinforced plastics , Force sensors , Milling , Process monitoring , Sensors

Visual Servo Based Trajectory Planning for Fast and Accurate Sheet Pick and Place Operations

Omey M. Manyar, Alec Kanyuck, Bharat Deshkulkarni, Satyandra K. Gupta

MSEC 2022; V001T04A019https://doi.org/10.1115/MSEC2022-85952

Abstract

View Articletitled, Visual Servo Based Trajectory Planning for Fast and Accurate Sheet Pick and Place Operations

PDF

Topics: Servomechanisms , Trajectories (Physics) , Machinery , Robots , Suction , Textiles , Aerospace industry , Composite materials , Control algorithms , Errors

Nano/Micro/Meso Manufacturing

Effect of Porosity on Tool Wear During Micromachining of Additive Manufactured Titanium Alloy

Vinay Varghese, Soham Mujumdar

MSEC 2022; V001T07A001https://doi.org/10.1115/MSEC2022-80096

Abstract

View Articletitled, Effect of Porosity on Tool Wear During Micromachining of Additive Manufactured Titanium Alloy

PDF

Topics: Additive manufacturing , Alloys , Cutting , Micromachining , Micromilling , Porosity , Titanium alloys , Wear

Cold Spray Multilayer Metal Build-Up on a Polymeric Substrate

Jung-Ting Tsai, Martin Byung-Guk Jun, David F. Bahr

MSEC 2022; V001T07A002https://doi.org/10.1115/MSEC2022-80318

Abstract

View Articletitled, Cold Spray Multilayer Metal Build-Up on a Polymeric Substrate

PDF

Topics: Electrical conductivity , Metals , Polymers , Sprays

Thermoplastic Forming Process for Manufacturing Arbitrary Blade Edge Geometries From Bulk Metallic Glass

Nattasit Dancholvichit, Srinivasa Salapaka, Shiv Kapoor

MSEC 2022; V001T07A003https://doi.org/10.1115/MSEC2022-80859

Abstract

View Articletitled, Thermoplastic Forming Process for Manufacturing Arbitrary Blade Edge Geometries From Bulk Metallic Glass

PDF

Topics: Blades , Manufacturing , Metallic glasses

Inkjet Printing of PEDOT:PSS Inks for Robotic Skin Sensors

Olalekan O. Olowo, Ruoshi Zhang, Andriy Sherehiy, Brian Goulet, Alexander Curry, Danming Wei, Zhong Yang, Moath Alqatamin, Dan O. Popa

MSEC 2022; V001T07A004https://doi.org/10.1115/MSEC2022-80989

Abstract

View Articletitled, Inkjet Printing of PEDOT:PSS Inks for Robotic Skin Sensors

PDF

Topics: Inks , Printing , Robotics , Sensors , Skin

Fabrication of Nanowires Using Glancing Angle Deposition

Chuang Qu, Shamus McNamara, Kevin Walsh

MSEC 2022; V001T07A005https://doi.org/10.1115/MSEC2022-83719

Abstract

View Articletitled, Fabrication of Nanowires Using Glancing Angle Deposition

PDF

Topics: Hydrogen , Manufacturing , Nanowires

Synthesis of Nano-Dots and Lines by Glancing Angle Deposition With Corrals

Chuang Qu, Shamus McNamara, Kevin Walsh

MSEC 2022; V001T07A006https://doi.org/10.1115/MSEC2022-83720

Abstract

View Articletitled, Synthesis of Nano-Dots and Lines by Glancing Angle Deposition With Corrals

PDF

Topics: Manufacturing , Nanofabrication , Nanostructures , Nucleation (Physics) , Semiconductor wafers , Shades and shadows , Shapes , Vapor deposition , Vapors

Effects of Pressure on Reusable Self-Assembled Microsphere Masks for Microsphere Photolithography

Chen Zhu, Edward C. Kinzel

MSEC 2022; V001T07A007https://doi.org/10.1115/MSEC2022-85165

Abstract

View Articletitled, Effects of Pressure on Reusable Self-Assembled Microsphere Masks for Microsphere Photolithography

PDF

Topics: Photolithography , Pressure , Self-assembly

Ultrafast Laser-Induced Surface Structuring of Anti-Fouling Steel Surfaces for Biomedical Applications

Abhijit Cholkar, Ronan McCann, David Kinahan, Dermot Brabazon

MSEC 2022; V001T07A008https://doi.org/10.1115/MSEC2022-85249

Abstract

View Articletitled, Ultrafast Laser-Induced Surface Structuring of Anti-Fouling Steel Surfaces for Biomedical Applications

PDF

Topics: Biomedicine , Lasers , Microscale devices , Stainless steel , Steel , Texture (Materials)

Synthesis and Fabrication of Single Walled Carbon Nanotube Microelectrode Arrays on Flexible Probes for Neurotransmitter Detection

Sei Jin Park, Anna Ivanovskaya, Allison Yorita

MSEC 2022; V001T07A009https://doi.org/10.1115/MSEC2022-85273

Abstract

View Articletitled, Synthesis and Fabrication of Single Walled Carbon Nanotube Microelectrode Arrays on Flexible Probes for Neurotransmitter Detection

PDF

Topics: Manufacturing , Probes , Single-walled carbon nanotubes , Electrodes , Metals , Carbon , Microfabrication , Resolution (Optics) , Carbon nanotubes , Catalysts

A Numerical Study on the Powder Flowability, Spreadability, Packing Fraction in Powder Bed Additive Manufacturing

Yeasir Mohammad Akib, Ehsan Marzbanrad, Farid Ahmed, Jianzhi Li

MSEC 2022; V001T07A010https://doi.org/10.1115/MSEC2022-85323

Abstract

View Articletitled, A Numerical Study on the Powder Flowability, Spreadability, Packing Fraction in Powder Bed Additive Manufacturing

PDF

Topics: Additive manufacturing , Molecular dynamics , Packing (Shipments) , Packings (Cushioning)

Experimental Characterization of the Mechanical Properties of Medical-Grade Dental Implants, Fabricated Using Vat-Photopolymerization Additive Manufacturing Process

Regan Raines, James B. Day, Roozbeh (Ross) Salary

MSEC 2022; V001T07A011https://doi.org/10.1115/MSEC2022-85436

Abstract

View Articletitled, Experimental Characterization of the Mechanical Properties of Medical-Grade Dental Implants, Fabricated Using Vat-Photopolymerization Additive Manufacturing Process

PDF

Topics: Additive manufacturing , Biomedicine , Experimental characterization , Manufacturing , Mechanical properties

Hydrogel and Graphene Embedded Piezoresistive Microcantilever Sensor for Solvent and Gas Flow Detection

Dipannita Ghosh, Md. Ashiqur Rahman, Ali Ashraf, Nazmul Islam

MSEC 2022; V001T07A012https://doi.org/10.1115/MSEC2022-85544

Abstract

View Articletitled, Hydrogel and Graphene Embedded Piezoresistive Microcantilever Sensor for Solvent and Gas Flow Detection

PDF

Topics: Gas flow , Graphene , Hydrogels , Microcantilevers , Sensors , Coating processes , Coatings , Embedded systems , Ethylene-propylene rubber , Simulation

Synthesizing and Printing of Tin Oxide Nanoparticles Using a Single Ultrafast Laser System: A Feasibility Study

Enrique Contreras Lopez, Farid Ahmed, Jianzhi Li

MSEC 2022; V001T07A013https://doi.org/10.1115/MSEC2022-85601

Abstract

View Articletitled, Synthesizing and Printing of Tin Oxide Nanoparticles Using a Single Ultrafast Laser System: A Feasibility Study

PDF

Topics: Laser ablation , Lasers , Nanoparticles , Printing

Unexpectedly High Yields in Chemical Vapor Deposition of Carbon Nanotubes Based on Reactor Wall Thermochemical History

Golnaz Tomaraei, Moataz Abdulhafez, Mostafa Bedewy

MSEC 2022; V001T07A014https://doi.org/10.1115/MSEC2022-85633

Abstract

View Articletitled, Unexpectedly High Yields in Chemical Vapor Deposition of Carbon Nanotubes Based on Reactor Wall Thermochemical History

PDF

Topics: Carbon nanotubes , Chemical vapor deposition , Carbon , Dynamics (Mechanics) , Manufacturing , Modeling , Oxygen , Robustness , Sensors , Water vapor

Characterizing the Conductivity of Aerosol Jet Printed Silver Traces on Glass Using Intense Pulsed Light (IPL)

Connor Ferris, Dilan Ratnayake, Alex Curry, Danming Wei, Erin Gerber, Thad Druffel, Kevin Walsh

MSEC 2022; V001T07A015https://doi.org/10.1115/MSEC2022-85649

Abstract

View Articletitled, Characterizing the Conductivity of Aerosol Jet Printed Silver Traces on Glass Using Intense Pulsed Light (IPL)

PDF

Topics: Aerosols , Electrical conductivity , Glass , Silver , Thermal conductivity , Hardening (Curing) , Inks , Ovens , Printing , Energy levels (Quantum mechanics)

Ultrafast Laser Texturing of Metal Surfaces: Effects of Process Parameters on Surface Reflectance and Possibility of Hierarchical Structuring

Nishan Khadka, Yucheng Yang, John Haug, Milan Palei, Matthew Rosenberger, Anthony Hoffman, Edward Kinzel

MSEC 2022; V001T07A016https://doi.org/10.1115/MSEC2022-85663

Abstract

View Articletitled, Ultrafast Laser Texturing of Metal Surfaces: Effects of Process Parameters on Surface Reflectance and Possibility of Hierarchical Structuring

PDF

Topics: Lasers , Metal surfaces , Reflectance

Size-Based Filtration of Poly-Disperse Micro-Particle by Dipping

Md Ibrahim Khalil, Bashir Khoda

MSEC 2022; V001T07A017https://doi.org/10.1115/MSEC2022-85680

Abstract

View Articletitled, Size-Based Filtration of Poly-Disperse Micro-Particle by Dipping

PDF

Topics: Filtration , Microparticles , Particulate matter

Ultrafast Laser Direct Writing of Conductive Patterns on Polyimide Substrate

Ishrat Jahan Biswas, Enrique Contreras Lopez, Farid Ahmed, Jianzhi Li

MSEC 2022; V001T07A018https://doi.org/10.1115/MSEC2022-85684

Abstract

View Articletitled, Ultrafast Laser Direct Writing of Conductive Patterns on Polyimide Substrate

PDF

Topics: Electronics , Lasers

A Study on the Effect of Nozzle Geometrical Parameters on Supersonic Cold Spraying of Droplets

Semih Akin, Puyuan Wu, Chandra Nath, Jun Chen, Martin Byung-Guk Jun

MSEC 2022; V001T07A019https://doi.org/10.1115/MSEC2022-85703

Abstract

View Articletitled, A Study on the Effect of Nozzle Geometrical Parameters on Supersonic Cold Spraying of Droplets

PDF

Topics: Computer simulation , Drops , Nanomaterials , Nozzles , Spraying (Coating processes) , Thin films

Effect of Withdrawal Velocity on Particle Entrainment From Density Mismatched Mixture

S. M. Naser Shovon, Ibrahim Khalil, Adeeb Alam, Bashir Khoda

MSEC 2022; V001T07A020https://doi.org/10.1115/MSEC2022-85745

Abstract

View Articletitled, Effect of Withdrawal Velocity on Particle Entrainment From Density Mismatched Mixture

PDF

Topics: Density , Particulate matter , Particle size , Binders (Materials) , Coating processes , Coatings , Evaporation , Manufacturing , Microparticles , Nickel

Mechanical and Metallurgical Characterization of Ultrafine Grained Titanium Laminates Developed by LSEM

Pushpinder Kumar, Ravinder Singh Joshi, Rohit Kumar Singla

MSEC 2022; V001T07A021https://doi.org/10.1115/MSEC2022-85839

Abstract

View Articletitled, Mechanical and Metallurgical Characterization of Ultrafine Grained Titanium Laminates Developed by LSEM

PDF

Topics: Deformation , Electron backscatter diffraction , Laminates , Titanium , Extruding , Machining , Surface roughness , Aerospace industry , Annealing , Biomedicine

Robust and Scalable Synthesis of High Surface Area Porous Copper Spheriodized Powders by Electroless Chemical Dealloying

Stanislau Niauzorau, Natalya Kublik, Amm Hasib, Bruno Azeredo

MSEC 2022; V001T07A022https://doi.org/10.1115/MSEC2022-85894

Abstract

View Articletitled, Robust and Scalable Synthesis of High Surface Area Porous Copper Spheriodized Powders by Electroless Chemical Dealloying

PDF

Topics: Agglomeration (Materials) , Copper , Copper powders , Current density , Electric potential , Electrolysis , Ethanol , Hazards , Heat , Hydrogen