Volumes | International Manufacturing Science and Engineering Conference | American Society of Mechanical Engineers Digital Collection

Topics: Computational fluid dynamics , Cutting , Finite element methods , Fluids , Temperature , Simulation , Cutting tools , Drilling , Heat transfer , Thermomechanics

Prediction of Surface Hardness in Laser-Assisted Milling

Yixuan Feng, Tsung-Pin Hung, Yu-Ting Lu, Yu-Fu Lin, Fu-Chuan Hsu, Chiu-Feng Lin, Ying-Cheng Lu, Steven Y. Liang

MSEC 2019; V002T03A029https://doi.org/10.1115/MSEC2019-2786

Abstract

View Articletitled, Prediction of Surface Hardness in Laser-Assisted Milling

PDF

Topics: Lasers , Milling

Study of Effect of Teeth Number on Cutting Force for Cutter Selection in the End Milling of TC4

Kaining Shi, Ning Liu, Sibao Wang, Chi Ma, Bo Yang, Lili Yi, Ling Kang

MSEC 2019; V002T03A030https://doi.org/10.1115/MSEC2019-2807

Abstract

View Articletitled, Study of Effect of Teeth Number on Cutting Force for Cutter Selection in the End Milling of TC4

PDF

Topics: Cutting , Milling

The Realities of Friction in Metal Plastic Flow With Corresponding Results During Metal Cutting

Wolfgang Lortz, Radu Pavel

MSEC 2019; V002T03A031https://doi.org/10.1115/MSEC2019-2818

Abstract

View Articletitled, The Realities of Friction in Metal Plastic Flow With Corresponding Results During Metal Cutting

PDF

Topics: Deformation , Friction , Metal cutting , Metals

Modelling of Brushing Processes

Christian Sommerfeld, Eckart Uhlmann, Anton Hoyer

MSEC 2019; V002T03A032https://doi.org/10.1115/MSEC2019-2833

Abstract

View Articletitled, Modelling of Brushing Processes

PDF

Topics: Coulomb's law , Friction , Modeling , Multibody systems , Deflection , Equations of motion , Approximation , Deburring , Polynomials , Process design

Multiphase Flow Distribution in MQL Drilling Using Optical Intensity Distribution Based Approach

Jay K. Raval, Wayne N. P. Hung, Bruce L. Tai

MSEC 2019; V002T03A033https://doi.org/10.1115/MSEC2019-2926

Abstract

View Articletitled, Multiphase Flow Distribution in MQL Drilling Using Optical Intensity Distribution Based Approach

PDF

Topics: Bits (Tools) , Computational fluid dynamics , Drilling , Drills (Tools) , Flow (Dynamics) , Lubrication , Machining , Multiphase flow , Simulation

Numerical Modeling of the Hot Forming Process of Composite Materials

Hao Wang, Bo Li, Zongyue Fan, Xiaobai Li

MSEC 2019; V002T03A034https://doi.org/10.1115/MSEC2019-2977

Abstract

View Articletitled, Numerical Modeling of the Hot Forming Process of Composite Materials

PDF

Topics: Composite materials , Computer simulation , Fibers , Simulation results , Thermomechanics , Compression , Materials properties , Melting , Particulate matter , Polymerization

Experimental and Simulation Study of Single Point Incremental Forming of Polycarbonate

Saurabh Rai, Rakesh Kumar, Harish Kumar Nirala, Kevin Francis, Anupam Agrawal

MSEC 2019; V002T03A035https://doi.org/10.1115/MSEC2019-3026

Abstract

View Articletitled, Experimental and Simulation Study of Single Point Incremental Forming of Polycarbonate

PDF

Topics: Simulation , Aircraft , Computer simulation , Displacement , Fracture (Materials) , Fracture (Process) , Glass bottles , Mechanical properties , Metals , Plastics

Simulating the Sequential Honing Process of Engine Cylinder Bore by Modeling Abrasives in Honing Stone

Zaoyang Zhou, Xueping Zhang, Kunlun Lv, Jun Wu, Zhenqiang Yao, Lifeng Xi

MSEC 2019; V002T03A036https://doi.org/10.1115/MSEC2019-3049

Abstract

View Articletitled, Simulating the Sequential Honing Process of Engine Cylinder Bore by Modeling Abrasives in Honing Stone

PDF

Topics: Abrasives , Engine cylinders , Modeling , Surface texture

Prediction of Mechanical Properties of Direct Metal Laser Sintered 15-5PH Steel Parts Using Bayesian Inference: A Preliminary Study

Ala Qattawi, Durul Ulutan, Ala’aldin Alafaghani

MSEC 2019; V002T03A037https://doi.org/10.1115/MSEC2019-3052

Abstract

View Articletitled, Prediction of Mechanical Properties of Direct Metal Laser Sintered 15-5PH Steel Parts Using Bayesian Inference: A Preliminary Study

PDF

Topics: Lasers , Mechanical properties , Metals , Sintering , Steel

Design and Analysis of the Transmission System in Geared Turbofan Engine

Yanzhong Wang, Kai Yang, Wen Tang

MSEC 2019; V002T03A038https://doi.org/10.1115/MSEC2019-3062

Abstract

View Articletitled, Design and Analysis of the Transmission System in Geared Turbofan Engine

PDF

Topics: Design , Engines , Gears , Turbofans

Advances in Nontraditional Manufacturing Processes

Rotary Ultrasonic Machining of Basalt Rock Using Compressed Air As Coolant: A Study on Edge Chipping and Surface Roughness

Palamandadige Fernando, Meng Zhang, Zhijian Pei, Adam Owens

MSEC 2019; V002T03A039https://doi.org/10.1115/MSEC2019-2768

Abstract

View Articletitled, Rotary Ultrasonic Machining of Basalt Rock Using Compressed Air As Coolant: A Study on Edge Chipping and Surface Roughness

PDF

Topics: Compressed air , Coolants , Drilling , Machining , Rocks , Surface roughness , Ultrasonic machining

Improvement on Straightness of Micro-Motor Shaft Considering Stress Concentration Caused by the Grooves

Zexing Guo, Hong Lu, Jinglin Zhang, Yue Zang, Weixin Zhang, Jianying He, Qiong Liu

MSEC 2019; V002T03A040https://doi.org/10.1115/MSEC2019-2826

Abstract

View Articletitled, Improvement on Straightness of Micro-Motor Shaft Considering Stress Concentration Caused by the Grooves

PDF

Topics: Deflection , Micromotors , Stress concentration

Straightening Process of Straight Metal Pipe Considering the Flattening Effect

Yang Lian, Hong Lu, Mingtian Ma, Jianying He, Qiong Liu, Qian Cheng, Yu Qiao

MSEC 2019; V002T03A041https://doi.org/10.1115/MSEC2019-2828

Abstract

View Articletitled, Straightening Process of Straight Metal Pipe Considering the Flattening Effect

PDF

Topics: Deformation , Metals , Pipes

Magnetorheological Nano-Surface-Finishing of Tapered Cavity of Chrome Steel Punch

Arpit Thomas, Anant Kumar Singh

MSEC 2019; V002T03A042https://doi.org/10.1115/MSEC2019-2851

Abstract

View Articletitled, Magnetorheological Nano-Surface-Finishing of Tapered Cavity of Chrome Steel Punch

PDF

Topics: Cavities , Chrome steel , Finishing , Surface roughness

Grey Relation Approach in Abrasive Jet Machining Process

Lijo Paul, J. Babu

MSEC 2019; V002T03A043https://doi.org/10.1115/MSEC2019-2852

Abstract

View Articletitled, Grey Relation Approach in Abrasive Jet Machining Process

PDF

Topics: Machining

Enhancing Conductivity and Corrosion Resistance by Organic Coatings on AZ31 Magnesium Alloy Treated by Micro-Arc Oxidation

Xiuping Zhang, Lei Li, Yaozhao Mu, Yanxiang Xie, Jun Dai, Jing Shi

MSEC 2019; V002T03A044https://doi.org/10.1115/MSEC2019-2894

Abstract

View Articletitled, Enhancing Conductivity and Corrosion Resistance by Organic Coatings on AZ31 Magnesium Alloy Treated by Micro-Arc Oxidation

PDF

Topics: Coatings , Corrosion resistance , Electrical conductivity , Magnesium alloys , Oxidation

Preliminary Results on Finishing of WC-Co Coating by Magnetorheological Finishing Process

Gourhari Ghosh, Ajay Sidpara, P. P. Bandyopadhyay

MSEC 2019; V002T03A045https://doi.org/10.1115/MSEC2019-2914

Abstract

View Articletitled, Preliminary Results on Finishing of WC-Co Coating by Magnetorheological Finishing Process

PDF

Topics: Coatings , Finishing , Surface roughness , Abrasion , Fluids , Aerospace industry , Automobiles , Boron , Etching , Grinding

Effect of Beam Oscillations on Formation of Defects in Electron Beam Welding of Copper Plate

Sanjib Jaypuria, Debalay Chakrabarti, D. K. Pratihar, M. N. Jha

MSEC 2019; V002T03A046https://doi.org/10.1115/MSEC2019-2943

Abstract

View Articletitled, Effect of Beam Oscillations on Formation of Defects in Electron Beam Welding of Copper Plate

PDF

Topics: Copper , Electron beam welding , Oscillations , Porosity

Fabrication of Copper Foam Plate Using Friction Sintering

Vyas Mani Sharma, Vikranth Racherla, Surjya Kanta Pal

MSEC 2019; V002T03A047https://doi.org/10.1115/MSEC2019-2952

Abstract

View Articletitled, Fabrication of Copper Foam Plate Using Friction Sintering

PDF

Topics: Copper , Friction , Manufacturing , Sintering

Friction Surfacing Using Consumable Tools: A Review

Ebrahim Seidi, Scott F. Miller

MSEC 2019; V002T03A048https://doi.org/10.1115/MSEC2019-2963

Abstract

View Articletitled, Friction Surfacing Using Consumable Tools: A Review

PDF

Topics: Coating processes , Coatings , Friction

The Development of a Microscale Tube Hydroforming Test Bed and Novel Sealing System: A Work in Progress

William J. Emblom, Ayotunde Olayinka, Scott W. Wagner

MSEC 2019; V002T03A049https://doi.org/10.1115/MSEC2019-2971

Abstract

View Articletitled, The Development of a Microscale Tube Hydroforming Test Bed and Novel Sealing System: A Work in Progress

PDF

Topics: Microscale devices , Sealing (Process)

Laser Deposition-Additive Manufacturing of Graphene Oxide Reinforced IN718 Alloys: Effects on Surface Quality, Microstructure, and Mechanical Properties

Yingbin Hu, Hui Wang, Weilong Cong

MSEC 2019; V002T03A050https://doi.org/10.1115/MSEC2019-2985

Abstract

View Articletitled, Laser Deposition-Additive Manufacturing of Graphene Oxide Reinforced IN718 Alloys: Effects on Surface Quality, Microstructure, and Mechanical Properties

PDF

Topics: Alloys , Graphene , Lasers , Manufacturing , Mechanical properties , Surface quality

Rotary Ultrasonic Machining of CFRP Composites: Effects of Machining Variables on Workpiece Delamination

Xiaoxu Chen, Hui Wang, Yingbin Hu, Dongzhe Zhang, Weilong Cong, Anthony R. Burks

MSEC 2019; V002T03A051https://doi.org/10.1115/MSEC2019-3019

Abstract

View Articletitled, Rotary Ultrasonic Machining of CFRP Composites: Effects of Machining Variables on Workpiece Delamination

PDF

Topics: Carbon reinforced plastics , Composite materials , Cutting , Delamination , Machining , Ultrasonic machining

Modeling of Material Removal in Atomized Dielectric-Based Electrical Discharge Machining (EDM)

Asif Tanveer, Shiv G. Kapoor, Soham S. Mujumdar

MSEC 2019; V002T03A052https://doi.org/10.1115/MSEC2019-3025

Abstract

View Articletitled, Modeling of Material Removal in Atomized Dielectric-Based Electrical Discharge Machining (EDM)

PDF

Topics: Electrical discharge machining , Modeling , Sprays

Advances in the Mechanics of Materials and Manufacturing Processes

Springback Analysis of Hybrid Materials Created Through Alternative Layup Processes

Elizabeth M. Mamros, Chetan P. Nikhare

MSEC 2019; V002T03A053https://doi.org/10.1115/MSEC2019-2877

Abstract

View Articletitled, Springback Analysis of Hybrid Materials Created Through Alternative Layup Processes

PDF

Topics: Adhesives , Aerospace industry , Composite materials , Delamination , Manufacturing , Materials properties , Metallic composites , Metals , Resins , Shapes

An Integrated DEM-FEM Model for Shot Peening Applications

Dhanooj Bobba, Praveen Ramaprabhu, Harish P. Cherukuri

MSEC 2019; V002T03A054https://doi.org/10.1115/MSEC2019-2885

Abstract

View Articletitled, An Integrated DEM-FEM Model for Shot Peening Applications

PDF

Topics: Discrete element methods , Finite element methods , Shot peening , Fatigue life , Compressive stress , Crack propagation , Flow (Dynamics) , Machine components , Particulate matter , Residual stresses

Pressurization and Annealing Effect Analysis Through Hole Expansion

Chetan P. Nikhare

MSEC 2019; V002T03A055https://doi.org/10.1115/MSEC2019-2904

Abstract

View Articletitled, Pressurization and Annealing Effect Analysis Through Hole Expansion

PDF

Topics: Alloys , Annealing , Carbon , Deformation , Density , Dimensions , Displacement , Domes (Structural elements) , Fuel consumption , Iron

Bending and Springback Analysis on Sheet Metal Material Discontinuity

Chetan P. Nikhare

MSEC 2019; V002T03A056https://doi.org/10.1115/MSEC2019-2905

Abstract

View Articletitled, Bending and Springback Analysis on Sheet Metal Material Discontinuity

PDF

Topics: Sheet metal , Clearances (Engineering) , Deformation , Leakage , Manufacturing , Metals , Particulate matter , Sustainability

An Experimental Study on Direct Current Dieless Drawing of 4130 Steel Tubes

Chetan P. Nikhare, Paul McMahon, Faisal Aqlan

MSEC 2019; V002T03A057https://doi.org/10.1115/MSEC2019-2906

Abstract

View Articletitled, An Experimental Study on Direct Current Dieless Drawing of 4130 Steel Tubes

PDF

Topics: Buckling , Electromagnetic induction , Fluid pressure , Fracture (Materials) , Fracture (Process) , Heating , Instrumentation , Lasers , Manufacturing , Shapes

Some Observations on How Mechanochemical Effect Determines Deformation Mode and Chip Morphology in Cutting of Metals

Tatsuya Sugihara, Mojib Saei, Koushik Viswanathan, Anirudh Udupa

MSEC 2019; V002T03A058https://doi.org/10.1115/MSEC2019-2909

Abstract

View Articletitled, Some Observations on How Mechanochemical Effect Determines Deformation Mode and Chip Morphology in Cutting of Metals

PDF

Topics: Deformation , Metal cutting , Flow (Dynamics) , Buckling , Chemical reactions , Cutting , Ethanol , Imaging , Metals , Stability

Glues Make Gummy Metals Easy to Cut

Anirudh Udupa, Tatsuya Sugihara, James B. Mann

MSEC 2019; V002T03A059https://doi.org/10.1115/MSEC2019-2922

Abstract

View Articletitled, Glues Make Gummy Metals Easy to Cut

PDF

Topics: Glues , Metals , Cutting , Flow (Dynamics) , Deformation , Machinability , Machining , Coatings , Density , Ductility

On the Application of Arbitrary Lagrangian-Eulerian and Remeshing Techniques to Simulate Certain Machining and Deformation Processing Operations

Vandana A. Salilkumar, Narayan K. Sundaram

MSEC 2019; V002T03A060https://doi.org/10.1115/MSEC2019-2957

Abstract

View Articletitled, On the Application of Arbitrary Lagrangian-Eulerian and Remeshing Techniques to Simulate Certain Machining and Deformation Processing Operations

PDF

Topics: Deformation , Machining , Metals , Plasticity , Simulation

In Situ Analysis of Deformation Mechanics of Constrained Cutting Towards Enhanced Material Removal

Yang Guo, Jisheng Chen, Amr Saleh

MSEC 2019; V002T03A061https://doi.org/10.1115/MSEC2019-2970

Abstract

View Articletitled, In Situ Analysis of Deformation Mechanics of Constrained Cutting Towards Enhanced Material Removal

PDF

Topics: Cutting , Deformation , Extruding

Structure and Deformation of Gradient Metal Foams Produced by Machining

H. Qiao, T. G. Murthy, C. Saldana

MSEC 2019; V002T03A062https://doi.org/10.1115/MSEC2019-2980

Abstract

View Articletitled, Structure and Deformation of Gradient Metal Foams Produced by Machining

PDF

Topics: Deformation , Foams (Chemistry) , Machining , Metal foams

An Experimental Study of Modulation-Assisted Turning of Ti6Al4V

Juan Sandoval, Dinh Nguyen, Patrick Kwon, Yang Guo

MSEC 2019; V002T03A063https://doi.org/10.1115/MSEC2019-3013

Abstract

View Articletitled, An Experimental Study of Modulation-Assisted Turning of Ti6Al4V

PDF

Topics: Carbide cutting tools , Computer numerical control machine tools , Displacement , Force measurement , Lubrication , Platelets , Turning , Wear , Wear testing

Nucleation and Boundary Layer Growth of Shear Bands in Machining

Shwetabh Yadav, Dinakar Sagapuram

MSEC 2019; V002T03A064https://doi.org/10.1115/MSEC2019-3022

Abstract

View Articletitled, Nucleation and Boundary Layer Growth of Shear Bands in Machining

PDF

Topics: Boundary layers , Machining , Nucleation (Physics) , Shear (Mechanics) , Flow (Dynamics) , Deformation , Fluids , Viscosity , Alloys , Cutting

A New Micromechanical Model to Study Transformation Plasticity in High-Carbon Steels

Rohit Voothaluru, Vikram Bedekar, Praveen Pauskar

MSEC 2019; V002T03A065https://doi.org/10.1115/MSEC2019-3043

Abstract

View Articletitled, A New Micromechanical Model to Study Transformation Plasticity in High-Carbon Steels

PDF

Topics: Carbon , Plasticity , Steel

Hard Machining and Grinding

Investigating Microstructural Changes and Phase Transformation During Slot Milling of Ti-6Al-4V in Dry, Flood Coolant and MQL Conditions

Ashutosh Khatri, Muhammad P. Jahan, Xingbang Chen, Jianfeng Ma

MSEC 2019; V002T03A066https://doi.org/10.1115/MSEC2019-3012

Abstract

View Articletitled, Investigating Microstructural Changes and Phase Transformation During Slot Milling of Ti-6Al-4V in Dry, Flood Coolant and MQL Conditions

PDF

Topics: Alloys , Coolants , Floods , Machining , Milling , Phase transitions

Laser-Based Advanced Manufacturing and Material Processing

Experimental Investigation on Laser Peening of Additively Manufactured Ti6Al4V Alloy

Yongxiang Hu, Mengqi Lai, Zhenqiang Yao

MSEC 2019; V002T03A067https://doi.org/10.1115/MSEC2019-2731

Abstract

View Articletitled, Experimental Investigation on Laser Peening of Additively Manufactured Ti6Al4V Alloy

PDF

Topics: Additive manufacturing , Alloys , Fatigue , Laser hardening , Stress

Laser Direct Energy Deposition Welding of AISI 316 Stainless Steel Sheets

Alessandro Ascari, Alessandro Fortunato, Erica Liverani, Adrian H. A. Lutey

MSEC 2019; V002T03A068https://doi.org/10.1115/MSEC2019-2779

Abstract

View Articletitled, Laser Direct Energy Deposition Welding of AISI 316 Stainless Steel Sheets

PDF

Topics: Lasers , Stainless steel , Welding , Cladding systems (Building) , Equipment performance , Fillers (Materials) , Fracture (Materials) , Laser welding , Melting , Shapes

Twinning Behavior in Magnesium Alloys Processed by Laser Shock Peening

Bo Mao, Yiliang Liao, Bin Li

MSEC 2019; V002T03A069https://doi.org/10.1115/MSEC2019-2850

Abstract

View Articletitled, Twinning Behavior in Magnesium Alloys Processed by Laser Shock Peening

PDF

Topics: Laser hardening , Magnesium alloys , Twinning

Laser Forming of Metal Foam Sandwich Panels: Effect of Panel Manufacturing Method

Tizian Bucher, Min Zhang, Chang Jun Chen, Ravi Verma, Wayne Li, Y. Lawrence Yao

MSEC 2019; V002T03A070https://doi.org/10.1115/MSEC2019-2873

Abstract

View Articletitled, Laser Forming of Metal Foam Sandwich Panels: Effect of Panel Manufacturing Method

PDF

Topics: Computer simulation , Lasers , Manufacturing , Metal foams

Effect of Post Laser Shock Peening on Microstructure and Mechanical Properties of Inconel 718 by Selective Laser Melting

Kuldeep Singh Sidhu, Yachao Wang, Jing Shi, Vijay K. Vasudevan, Seetha Ramaiah Mannava

MSEC 2019; V002T03A071https://doi.org/10.1115/MSEC2019-2893

Abstract

View Articletitled, Effect of Post Laser Shock Peening on Microstructure and Mechanical Properties of Inconel 718 by Selective Laser Melting

PDF

Topics: Laser hardening , Lasers , Mechanical properties , Melting , Stress

Improving Room Temperature-Stretch Formability of Magnesium Alloys by Laser Shock Peening

Bo Mao, Xing Zhang, Yiliang Liao, Bin Li

MSEC 2019; V002T03A072https://doi.org/10.1115/MSEC2019-2910

Abstract

View Articletitled, Improving Room Temperature-Stretch Formability of Magnesium Alloys by Laser Shock Peening

PDF

Topics: Laser hardening , Magnesium alloys , Temperature

Preliminary Study on Effects of the Process Parameters on Mechanical Properties in Liquid Holographic Volumetric Additive Manufacturing Process

Sagil James, Thilakraj Shivakumar

MSEC 2019; V002T03A073https://doi.org/10.1115/MSEC2019-2917

Abstract

View Articletitled, Preliminary Study on Effects of the Process Parameters on Mechanical Properties in Liquid Holographic Volumetric Additive Manufacturing Process

PDF

Topics: Additive manufacturing , Mechanical properties , Photopolymers

Ultrafast Laser Applications in Manufacturing Processes: A State of the Art Review

Shuting Lei, Xin Zhao, Xiaoming Yu, Anming Hu, Sinisa Vukelic, Martin B. G. Jun, Hang-Eun Joe, Y. Lawrence Yao, Yung C. Shin

MSEC 2019; V002T03A074https://doi.org/10.1115/MSEC2019-2968

Abstract

View Articletitled, Ultrafast Laser Applications in Manufacturing Processes: A State of the Art Review

PDF

Topics: Lasers , Manufacturing , Machining , Innovation , Additive manufacturing , Biomanufacturing , Computer simulation , Inventions , Resolution (Optics) , Thermal diffusion

The Effects of Laser-Assisted Ultrasonic Nanocrystal Surface Modification on 3D-Printed Ti-6Al-4V Alloy

Hao Zhang, Jun Liu, Yalin Dong, Chang Ye

MSEC 2019; V002T03A075https://doi.org/10.1115/MSEC2019-2979

Abstract

View Articletitled, The Effects of Laser-Assisted Ultrasonic Nanocrystal Surface Modification on 3D-Printed Ti-6Al-4V Alloy

PDF

Topics: Additive manufacturing , Alloys , Finishes , Lasers , Nanocrystals

Formation of Micro-/Nano-Surface Structures on Stainless Steel by Ultrafast Lasers

Kewei Li, Xin Zhao

MSEC 2019; V002T03A076https://doi.org/10.1115/MSEC2019-3023

Abstract

View Articletitled, Formation of Micro-/Nano-Surface Structures on Stainless Steel by Ultrafast Lasers

PDF

Topics: Lasers , Stainless steel , Dimensions , Dynamics (Mechanics) , Fluence (Radiation measurement) , Irradiation (Radiation exposure) , Nanoscale phenomena

Novel Joining Technologies for Dissimilar Materials

Corrosion Characterization of Resistance Spot Welded Aluminum and Steel Couple

Surender Maddela, Blair E. Carlson

MSEC 2019; V002T03A077https://doi.org/10.1115/MSEC2019-2704

Abstract

View Articletitled, Corrosion Characterization of Resistance Spot Welded Aluminum and Steel Couple

PDF

Topics: Aluminum , Corrosion , Electrolytic corrosion , Steel

Assessment of Microstructure and Mechanical Properties in Laser Cladding, Welding and Surface Polishing Through Online Monitoring of Thermal History

Ashish Kumar Nath, Muvvala Gopinath

MSEC 2019; V002T03A078https://doi.org/10.1115/MSEC2019-2722

Abstract

View Articletitled, Assessment of Microstructure and Mechanical Properties in Laser Cladding, Welding and Surface Polishing Through Online Monitoring of Thermal History

PDF

Topics: Cladding systems (Building) , Lasers , Mechanical properties , Polishing , Welding , Solidification , Ceramic coatings , Cooling , Thermal stresses , Additive manufacturing

Convolutional Neural Network Using Bayesian Optimization for Laser Welding Tailor Rolled Blanks Penetration Detection

Zhehao Zhang, Yi Zhang, Feng Luo, Jie Li, Cheng Lu, Yuze Zhao, Hang Zhang, Ange Lu

MSEC 2019; V002T03A079https://doi.org/10.1115/MSEC2019-2836

Abstract

View Articletitled, Convolutional Neural Network Using Bayesian Optimization for Laser Welding Tailor Rolled Blanks Penetration Detection

PDF

Topics: Artificial neural networks , Blanks , Laser welding , Optimization

Numerical Analysis of In-Process Heat Transfer and Material Flow During Dissimilar Friction Stir Welding Process

Gaoqiang Chen, Xun Liu, Qingyu Shi

MSEC 2019; V002T03A080https://doi.org/10.1115/MSEC2019-2855

Abstract

View Articletitled, Numerical Analysis of In-Process Heat Transfer and Material Flow During Dissimilar Friction Stir Welding Process

PDF

Topics: Flow (Dynamics) , Friction , Heat transfer , Numerical analysis , Steel , Welding

Joint Formation and Mechanical Performance of Friction Self-Piercing Riveted Aluminum Alloy AA7075-T6 Joints

YunWu Ma, YongBing Li, ZhongQin Lin

MSEC 2019; V002T03A081https://doi.org/10.1115/MSEC2019-2857

Abstract

View Articletitled, Joint Formation and Mechanical Performance of Friction Self-Piercing Riveted Aluminum Alloy AA7075-T6 Joints

PDF

Topics: Aluminum alloys , Equipment performance , Friction , Rivets , Shear (Mechanics) , Riveting , Failure mechanisms , Geometry , Peak load , Absorption

Comparison of Commercially Available Thread Forming Profiles on Flow Drill Joining of 6061-T6 Aluminum to Thermoset Carbon Fiber Reinforced Composite

Brandt J. Ruszkiewicz, Gene Simpson, Eric Breidenbaugh

MSEC 2019; V002T03A082https://doi.org/10.1115/MSEC2019-2927

Abstract

View Articletitled, Comparison of Commercially Available Thread Forming Profiles on Flow Drill Joining of 6061-T6 Aluminum to Thermoset Carbon Fiber Reinforced Composite

PDF

Topics: Aluminum , Carbon fibers , Composite materials , Drills (Tools) , Flow (Dynamics) , Joining , Thread , Polymers , Metals , Screws

Ultrasonic Welding of Soft Polymer and Metal: A Preliminary Study

Yuquan Meng, Dingyu Peng, Qasim Nazir, Gowtham Kuntumalla, Manjunath C. Rajagopal, Ho Chan Chang, Hanyang Zhao, Sreenath Sundar, Placid M. Ferreira, Sanjiv Sinha, Nenad Miljkovic, Srinivasa M. Salapaka, Chenhui Shao

MSEC 2019; V002T03A083https://doi.org/10.1115/MSEC2019-2938

Abstract

View Articletitled, Ultrasonic Welding of Soft Polymer and Metal: A Preliminary Study

PDF

Topics: Copper , Heat exchangers , Metals , Polymers , Ultrasonic welding

Mechanical and Bond Behavior of an Advanced Quranic Metal-Matrix Composite Material (QMMC)

S. Mousa, M. Atta, A. A. Abd-Elhady, Ahmed Abu-Sinna, O. Bafakeeh, H. E. M. Sallam

MSEC 2019; V002T03A084https://doi.org/10.1115/MSEC2019-2950

Abstract

View Articletitled, Mechanical and Bond Behavior of an Advanced Quranic Metal-Matrix Composite Material (QMMC)

PDF

Topics: Composite materials , Metals , Copper , Iron , Bellows (Equipment) , Finite element methods , Fire , Fracture (Materials) , Manufacturing , Mechanical behavior

Significance of Workpiece Conductivity on Resistance Spot Welding Process Map

Xin Wu, Jingtao Du, Wayne Cai

MSEC 2019; V002T03A085https://doi.org/10.1115/MSEC2019-2958

Abstract

View Articletitled, Significance of Workpiece Conductivity on Resistance Spot Welding Process Map

PDF

Topics: Electrical conductivity , Thermal conductivity , Welding , Metals , Copper , Steel , Electrodes , Heat , Melting , Steady state

Transient Liquid Phase Bonding of Inconel 718 With Ni and BNi-2 Nano-Braze Materials

Denzel Bridges, Anming Hu, Raymond Xu

MSEC 2019; V002T03A086https://doi.org/10.1115/MSEC2019-2973

Abstract

View Articletitled, Transient Liquid Phase Bonding of Inconel 718 With Ni and BNi-2 Nano-Braze Materials

PDF

Topics: Bonding , Transients (Dynamics) , Particulate matter , Nanoparticles , Heating , Sintering , Fracture (Materials) , Fracture (Process) , Joining , Melting

Study on Formation and Performance of Electric-Aided Self-Piercing Riveted Aluminum Alloy and Dual-Phase Steels With Different Strength Grades

Ming Lou, Yunwu Ma, Yongbing Li

MSEC 2019; V002T03A087https://doi.org/10.1115/MSEC2019-2984

Abstract

View Articletitled, Study on Formation and Performance of Electric-Aided Self-Piercing Riveted Aluminum Alloy and Dual-Phase Steels With Different Strength Grades

PDF

Topics: Aluminum alloys , Steel , Aluminum , Riveting , Shear (Mechanics) , Tension , Current density , Deformation , Fracture (Materials) , Fracture (Process)

Fabrication of Glass to Metal Connections Using a Laser Heated Additive Approach

Bret Curtis, Cody Lough, Robert Landers, Doug Bristow, Edward Kinzel

MSEC 2019; V002T03A088https://doi.org/10.1115/MSEC2019-3048

Abstract

View Articletitled, Fabrication of Glass to Metal Connections Using a Laser Heated Additive Approach

PDF

Topics: Glass , Lasers , Manufacturing , Metals , High temperature , Additive manufacturing , Fixturing , Furnaces , Geometry , Heat

Tribology of Manufacturing Processes and Machine Elements

Tool Wear of Superhard Ceramic Coated Tools in Drilling of CFRP/Ti Stacks

Dinh Nguyen, Vadim Voznyuk, Mohammad Sayem Bin Abdullah, Dave Kim, Patrick Y. Kwon

MSEC 2019; V002T03A089https://doi.org/10.1115/MSEC2019-2843

Abstract

View Articletitled, Tool Wear of Superhard Ceramic Coated Tools in Drilling of CFRP/Ti Stacks

PDF

Topics: Carbon reinforced plastics , Ceramics , Drilling , Wear , Drills (Tools) , Diamond films , Alloys , Ceramic coatings , Coating processes , Coatings

A Novel Laser Shock Surface Patterning Process Toward Tribological Applications

Bo Mao, Arpith Siddaiah, Pradeep L. Menezes, Yiliang Liao

MSEC 2019; V002T03A090https://doi.org/10.1115/MSEC2019-2849

Abstract

View Articletitled, A Novel Laser Shock Surface Patterning Process Toward Tribological Applications

PDF

Topics: Friction , Lasers , Shock (Mechanics) , Tribology

Materials

Advances in Processing of Polymers and Polymer Composites

Recycling of Printed Circuit Boards by Direct Molding Technology

F. Quadrini, D. Bellisario, G. M. Tedde, L. Santo

MSEC 2019; V002T04A001https://doi.org/10.1115/MSEC2019-2745

Abstract

View Articletitled, Recycling of Printed Circuit Boards by Direct Molding Technology

PDF

Topics: Molding , Printed circuit boards , Recycling , Metals , Bonding agents , Composite materials , Compression molding , Density , Friction , Grinding

Experimental and Numerical Analyses on the Poly(Lactide-Co-Glycolide) Hollow Fiber Membranes

Zonghuan Wang, Jun Yin

MSEC 2019; V002T04A002https://doi.org/10.1115/MSEC2019-2752

Abstract

View Articletitled, Experimental and Numerical Analyses on the Poly(Lactide-Co-Glycolide) Hollow Fiber Membranes

PDF

Topics: Fibers , Membranes , Numerical analysis , Porosity , Spin (Aerodynamics) , Spinning (Textile)

Out-of-Autoclave Repair of Composite Laminates by Using Shape Memory Polymer Foams

D. Bellisario, F. Quadrini, L. Santo, L. Iorio, N. Gallo, S. Corvaglia

MSEC 2019; V002T04A003https://doi.org/10.1115/MSEC2019-2765

Abstract

View Articletitled, Out-of-Autoclave Repair of Composite Laminates by Using Shape Memory Polymer Foams

PDF

Topics: Composite materials , Foams (Chemistry) , Laminates , Maintenance , Shape memory polymers , Shapes , Pressure , Agglomeration (Materials) , Cycles , Compression

On the 3D Printability of Multi-Walled Carbon Nanotube/High Density Polyethylene Composites

Felicia Stan, Nicoleta-Violeta Stanciu, Catalin Fetecau

MSEC 2019; V002T04A004https://doi.org/10.1115/MSEC2019-2776

Abstract

View Articletitled, On the 3D Printability of Multi-Walled Carbon Nanotube/High Density Polyethylene Composites

PDF

Topics: Composite materials , Density , Multi-walled carbon nanotubes , Additive manufacturing , Shear (Mechanics) , Electrical properties , Flow (Dynamics) , Nozzles , Rheology , Shear rate

Mechanical Recycling of Low-Density Polyethylene/Carbon Nanotube Composites and its Effect on Material Properties

Felicia Stan, Nicoleta-Violeta Stanciu, Catalin Fetecau, Ionut-Laurentiu Sandu

MSEC 2019; V002T04A005https://doi.org/10.1115/MSEC2019-2929

Abstract

View Articletitled, Mechanical Recycling of Low-Density Polyethylene/Carbon Nanotube Composites and its Effect on Material Properties

PDF

Topics: Carbon nanotubes , Composite materials , Low density polyethylene , Materials properties , Recycling , Multi-walled carbon nanotubes , Injection molding , Mechanical properties , Rheology , Engineering systems and industry applications

Experimental Investigation of Stratasys J750 PolyJet Printer: Effects of Finish Type and Shore Hardness on Surface Roughness

Xingjian Wei, Abhinav Bhardwaj, Li Zeng, Zhijian Pei

MSEC 2019; V002T04A006https://doi.org/10.1115/MSEC2019-2998

Abstract

View Articletitled, Experimental Investigation of Stratasys J750 PolyJet Printer: Effects of Finish Type and Shore Hardness on Surface Roughness

PDF

Topics: Finishes , Surface roughness

Bio-/Nano-Materials and Self-Organizing Smart Structures

Multizone Rapid Thermal Processing to Overcome Challenges in Carbon Nanotube Manufacturing by Chemical Vapor Deposition

Jaegeun Lee, Moataz Abdulhafez, Mostafa Bedewy

MSEC 2019; V002T04A007https://doi.org/10.1115/MSEC2019-2847

Abstract

View Articletitled, Multizone Rapid Thermal Processing to Overcome Challenges in Carbon Nanotube Manufacturing by Chemical Vapor Deposition

PDF

Topics: Carbon nanotubes , Chemical vapor deposition , Manufacturing , Rapid thermal processing , Catalysts , Cycles , Dynamics (Mechanics) , Oxygen , Particulate matter , Pressure

Microwave-Assisted Processing of Regenerated Silk Fibroin Films

Moataz Abdulhafez, Se Youn Cho, Golnaz Tomaraei, Mostafa Bedewy

MSEC 2019; V002T04A008https://doi.org/10.1115/MSEC2019-2932

Abstract

View Articletitled, Microwave-Assisted Processing of Regenerated Silk Fibroin Films

PDF

Topics: Microwaves , Irradiation (Radiation exposure) , Transparency , Biocompatibility , Biodegradation , Casting , Electronics , Food products , Fourier transform infrared spectroscopy , Fourier transforms