Skip Nav Destination
Proceedings Papers
In This Volume
Volume 2: Materials; Joint MSEC-NAMRC-Manufacturing USA
Materials
Advances in Composites Manufacturing Processes
Developments and Analyses of Alternative Processes for the Manufacturing of Fiber Metal Laminates
MSEC 2018; V002T04A001https://doi.org/10.1115/MSEC2018-6447
Topics:
Fibers
,
Laminates
,
Manufacturing
,
Metals
,
Blanks
,
Compression molding
,
Geometry
,
Resins
,
Transfer molding
Interlaminar Toughening of Fiber Reinforced Polymers by Synergistic Modification of Resin and Fiber
MSEC 2018; V002T04A002https://doi.org/10.1115/MSEC2018-6528
Topics:
Fibers
,
Polymers
,
Resins
,
Epoxy resins
,
Epoxy adhesives
,
Bonding
,
Delamination
,
Density
,
Fracture (Materials)
,
Fracture (Process)
Advances in Metal Matrix Nanocomposites
Nickel/Alumina Metal Matrix Nanocomposites Obtained by High-Energy Ball Milling and Spark Plasma Sintering
Enrique Martínez-Franco, Ming Li, Ricardo Cuenca Álvarez, Jesús González Hernández, Chao Ma, Juan Manuel Alvarado Orozco
MSEC 2018; V002T04A003https://doi.org/10.1115/MSEC2018-6610
Topics:
Ball milling
,
Metals
,
Nanocomposites
,
Nickel
,
Plasmas (Ionized gases)
,
Sintering
,
Nanoparticles
,
Milling
,
Cross section (Physics)
,
Particulate matter
Preparation of Metal Matrix Nanocomposite Powder Using Electroless Plating
MSEC 2018; V002T04A004https://doi.org/10.1115/MSEC2018-6676
Topics:
Electroless plating
,
Metals
,
Nanocomposites
,
Disks
,
Nanoparticles
,
Nickel
,
Additive manufacturing
,
Ball milling
,
Density
,
Energy consumption
Microstructure and Tensile Properties of SLM Graphene Reinforced Inconel 718 Alloy After Post Heat Treatment
MSEC 2018; V002T04A005https://doi.org/10.1115/MSEC2018-6694
Topics:
Alloys
,
Graphene
,
Heat treating (Metalworking)
,
Tensile strength
,
Composite materials
,
Additive manufacturing
,
Bonding
,
Cycles
,
Ductility
,
Heat
Advances in Processing of Polymers and Polymer-Based Composites
Characterization of Welding Attributes in Friction Spot Stir Welding of High-Density Polyethylene/Multi-Walled Carbon Nanotube Composites
MSEC 2018; V002T04A006https://doi.org/10.1115/MSEC2018-6317
Topics:
Composite materials
,
Density
,
Friction
,
Multi-walled carbon nanotubes
,
Welding
,
Shear (Mechanics)
,
Nanotubes
,
Stress
,
Crystallization
,
Fracture (Materials)
A Study of Friction Stir Welding of High Density Polyethylene
MSEC 2018; V002T04A007https://doi.org/10.1115/MSEC2018-6318
Topics:
Density
,
Friction
,
Welding
,
Temperature
,
Fracture (Materials)
,
Fracture (Process)
,
Melting point
,
Tensile testing
,
Thermocouples
,
Thermography
Electrohydrodynamic Casting Polymeric Carbon Nanofibers From Different Precursors for the Hyperthermia Application
MSEC 2018; V002T04A008https://doi.org/10.1115/MSEC2018-6350
Topics:
Carbon
,
Casting
,
Electrohydrodynamics
,
Nanofibers
,
Composite materials
,
Fibers
,
Heat
,
Heat treating (Metalworking)
,
Metals
,
Polymer solutions
Design of Nano-Filled PET Sheets With Enhanced Barrier Properties
MSEC 2018; V002T04A010https://doi.org/10.1115/MSEC2018-6413
Topics:
Aluminum
,
Chain
,
Coatings
,
Contamination
,
Design
,
Food products
,
Nanocomposites
,
Nanotechnology
,
Oxygen
,
Packaging
Shape Memory Behavior of Carbon Composites With Functional Interlayer
MSEC 2018; V002T04A013https://doi.org/10.1115/MSEC2018-6449
Topics:
Carbon composites
,
Shapes
,
Composite materials
,
Shape memory polymers
,
Carbon fibers
,
Cycles
,
Fibers
,
Freezing
,
Mechanical properties
,
Polymers
A Model for Hyper-Elastic Material Behavior Under Thermal Aging With an Application to Natural Rubber
MSEC 2018; V002T04A015https://doi.org/10.1115/MSEC2018-6539
Topics:
Natural rubber
,
Temperature
,
Fittings
,
Stress
,
Continuum mechanics
,
Deformation
,
Fatigue analysis
,
Matlab
,
Optimization
,
Ovens
Supercritical CO2 Pretreatment of Cellulosic Biomass for Biofuel Production: Effects of Biomass Particle Size
MSEC 2018; V002T04A018https://doi.org/10.1115/MSEC2018-6656
Topics:
Biofuel
,
Biomass
,
Particle size
,
Supercritical carbon dioxide
,
Size reduction (Materials)
,
Chemistry
,
Ethanol
,
Fuels
,
Glucose
,
Particulate matter
Advances in the Mechanics of Materials and Manufacturing Processes
Edge Profiling of Titanium Alloys and Attainable Surface Quality
MSEC 2018; V002T04A022https://doi.org/10.1115/MSEC2018-6425
Topics:
Aerospace industry
,
Alloys
,
Fatigue cracks
,
Flanges
,
Machinery
,
Machining
,
Milling
,
Nylon fabrics
,
Safety
,
Silicon
Texture Development and Mechanical Response in Microscale Reverse Extrusion of Copper
MSEC 2018; V002T04A024https://doi.org/10.1115/MSEC2018-6472
Topics:
Copper
,
Extruding
,
Microscale devices
,
Texture (Materials)
,
Electron backscatter diffraction
,
Metalworking
,
Displacement
,
Metals
,
Modeling
,
Poles (Building)
Effect of Graphene Addition on Crack Propagation Resistance in Glass Fibre Reinforced Polymer Matrix Composite
MSEC 2018; V002T04A025https://doi.org/10.1115/MSEC2018-6563
Topics:
Crack propagation
,
Glass fibers
,
Graphene
,
Polymer composites
,
Composite materials
,
Fibers
,
Fracture toughness
,
Bonding
,
Coating processes
,
Coatings
Machining Performance and Microstructure Evolution in Milling Advanced Low-Alloy Military-Grade Steel
MSEC 2018; V002T04A026https://doi.org/10.1115/MSEC2018-6566
Topics:
Alloys
,
Machining
,
Military systems
,
Milling
,
Steel
,
Cooling
,
Defense industry
,
Machinability
,
Structural steel
,
Dynamic testing (Materials)
Multi-Scale Characterization of Deformation in Aluminum
MSEC 2018; V002T04A027https://doi.org/10.1115/MSEC2018-6574
Design of an Octo-Strain Specimen for Biaxial Tension Testing
MSEC 2018; V002T04A028https://doi.org/10.1115/MSEC2018-6612
Topics:
Anisotropy
,
Deformation
,
Design
,
Failure
,
Gages
,
Geometry
,
Sheet metal
,
Steel
,
Stress
,
Stress concentration
Consolidation of Nanostructured Metal Powders Produced by Modulation-Assisted Machining
MSEC 2018; V002T04A029https://doi.org/10.1115/MSEC2018-6621
Topics:
Machining
,
Metal powders
,
Extruding
,
Particulate matter
,
Alloys
,
Aluminum alloys
,
Elongation
,
Grain boundaries
,
Grain size
,
Metals
An Experimental Study of Wedge Indentation of Porous Solids: Implications for Cutting and Drilling Processes
MSEC 2018; V002T04A030https://doi.org/10.1115/MSEC2018-6629
Topics:
Cutting
,
Drilling
,
Solids
,
Wedges
,
Deformation
,
Copper
,
Gypsum
,
Brittleness
,
Compacting
,
Compression
Chip Morphology Studies Using Separate Fracture Toughness Values for Chip Separation and Serration in Orthogonal Machining Simulations
MSEC 2018; V002T04A031https://doi.org/10.1115/MSEC2018-6682
Topics:
Engineering simulation
,
Fracture toughness
,
Machining
,
Separation (Technology)
,
Simulation
,
Damage
,
Cutting
,
Modeling
,
Shapes
,
Temperature
Viscous Shear Banding in Cutting of Metals
MSEC 2018; V002T04A032https://doi.org/10.1115/MSEC2018-6697
Topics:
Metal cutting
,
Shear (Mechanics)
,
Deformation
,
Viscosity
,
Alloys
,
Cutting
,
Diffusion (Physics)
,
Displacement
,
Drag (Fluid dynamics)
,
Flow (Dynamics)
Novel Joining Technologies for Dissimilar Materials
Spectroscopic Studies of Dissimilar Al-Cu Laser Welding
MSEC 2018; V002T04A033https://doi.org/10.1115/MSEC2018-6310
Material Flow Visualization of Dissimilar Friction Stir Welding Process Using Nano-CT
MSEC 2018; V002T04A035https://doi.org/10.1115/MSEC2018-6363
Topics:
Flow visualization
,
Friction
,
Welding
,
Steel
,
Aluminum
,
Heat
,
Strips
,
Aluminum alloys
,
Brittleness
,
Flow (Dynamics)
Thermally Assisted Self-Piercing Riveting of Aluminum AA6061-T6 to Ultra-High Strength Steels
MSEC 2018; V002T04A036https://doi.org/10.1115/MSEC2018-6367
Topics:
Aluminum
,
Riveting
,
Steel
,
Heating
,
Rivets
,
Aluminum alloys
,
Electromagnetic induction
,
Fracture (Materials)
,
Manufacturing
,
Mechanical testing
Influence of Heat Input on Mechanical Properties and Microstructure of Laser Welded Dissimilar Galvanized Steel-Aluminum Joints
MSEC 2018; V002T04A037https://doi.org/10.1115/MSEC2018-6419
Topics:
Aluminum
,
Heat
,
Lasers
,
Mechanical properties
,
Steel
,
Aluminum alloys
,
Galvanized steel
,
Shear (Mechanics)
,
Welding
,
Brittleness
Effects of Process Parameters on Crack Inhibition and Mechanical Interlocking in Friction Self-Piercing Riveting Aluminum Alloy and Magnesium Alloy
MSEC 2018; V002T04A039https://doi.org/10.1115/MSEC2018-6452
Topics:
Aluminum alloys
,
Fracture (Materials)
,
Friction
,
Magnesium alloys
,
Riveting
,
Ductility
,
Joining
,
Welding
,
Heat
,
Optimization
A Study on Laser Welding of Titanium and Stainless Steel
MSEC 2018; V002T04A040https://doi.org/10.1115/MSEC2018-6584
Topics:
Laser welding
,
Stainless steel
,
Titanium
,
Fracture (Materials)
,
Cooling
,
Welding
,
Intermetallic compounds
,
Brittleness
,
Metals
,
Stress
Preparation of Thick Ni/Al Reactive Multilayer Films and Prospective Use for Self-Powered Brazing of Ti-6Al-4V
Denzel Bridges, Ying Ma, Cary Smith, Zhili Zhang, Anming Hu, Christopher Rouleau, Zachary Gosser, Kunlun Hong, Jinquan Cheng, Yoseph Bar-Cohen
MSEC 2018; V002T04A042https://doi.org/10.1115/MSEC2018-6627
Topics:
Brazing
,
Delamination
,
Melting
,
Solidification
,
Bonding
,
Cycles
,
Heat
,
Ignition
,
Manufacturing
,
Pressure
Numerical Modeling of Thermo-Fluid Flow and Metal Mixing in Laser Keyhole Welding of Dissimilar Metals
MSEC 2018; V002T04A043https://doi.org/10.1115/MSEC2018-6640
Topics:
Computer simulation
,
Flow (Dynamics)
,
Lasers
,
Metals
,
Thermofluids
,
Welding
,
Diffusion (Physics)
,
Elements
,
Intermetallic compounds
,
Physics
A State-of-the-Art Review on Solid-State Metal Joining
MSEC 2018; V002T04A044https://doi.org/10.1115/MSEC2018-6683
Topics:
Joining
,
Metals
,
Welding
,
Bonding
,
Diffusion (Physics)
,
Friction
,
Friction welding
,
Heat
,
Modeling
,
Nondestructive evaluation
Joint MSEC-NAMRC-Manufacturing USA
Research in Collaboration With Manufacturing USA Institutes
Gaussian Process Model for Touch Probing
MSEC 2018; V002T07A003https://doi.org/10.1115/MSEC2018-6548
Topics:
Algorithms
,
Coordinate measuring machines
,
Errors
,
Machinery
,
Machining
,
Uncertainty
Regional Manufacturing Cost Structures and Supply Chain Considerations for Medium Voltage Silicon Carbide Power Applications
MSEC 2018; V002T07A004https://doi.org/10.1115/MSEC2018-6601
Topics:
Manufacturing
,
Silicon
,
Supply chains
,
Collaboration
,
Energy gap
,
Motor drives
,
Semiconductor wafers
,
Semiconductors (Materials)
Email alerts
Most Read Proceedings Papers in MSEC
MSEC2024 Front Matter
MSEC2024