Volumes | International Manufacturing Science and Engineering Conference | American Society of Mechanical Engineers Digital Collection

Skip Nav Destination

ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing

June 4–8, 2017

Los Angeles, California, USA

Conference Sponsors:

ISBN:

978-0-7918-5073-2

In This Volume

Additive Manufacturing (48)
Materials (31)

Volume 2: Additive Manufacturing; Materials

Additive Manufacturing

Additive Manufacturing Process Improvements for Microstructure and Material Properties

Effects of Surface Roughness on Bonding Behavior of Cold Spray Ti6Al4V Coatings

Wen Sun, Adrian Wei Yee Tan, Iulian Marinescu, Erjia Liu

MSEC 2017; V002T01A001doi:https://doi.org/10.1115/MSEC2017-2753

Abstract

View Article

PDF

Investigation of Wear and Corrosion Characteristics of Stellite-6 and Stellite-21 Layers Deposited by Co-Axial Laser Cladding

Debapriya Patra Karmakar, Muvvala Gopinath, Soham Harmalkar, Ashish Kumar Nath

MSEC 2017; V002T01A002doi:https://doi.org/10.1115/MSEC2017-2841

Abstract

View Article

PDF

Topics: Cladding systems (Building) , Corrosion , Lasers , Wear , Wear resistance , Alloys , Coatings , Friction , Molybdenum , Tool steel

Fundamental Study of Fused-Coating Based Metal Additive Manufacturing

Xuewei Fang, Jun Du, Zhengying Wei, Xin Wang, Pengfei He, Bowen Wang, Hao Bai, Bingheng Lu

MSEC 2017; V002T01A003doi:https://doi.org/10.1115/MSEC2017-2843

Abstract

View Article

PDF

Topics: Additive manufacturing , Coating processes , Coatings , Metals , Nozzles , Pressure , Temperature , Alloys , Bonding , Generators

Numerical Modeling of Grain Growth in Laser Engineered Net Shaping (LENS) of AISI 316 Stainless Steel

Wenda Tan, Xuxiao Li

MSEC 2017; V002T01A004doi:https://doi.org/10.1115/MSEC2017-2873

Abstract

View Article

PDF

Topics: Computer simulation , Lasers , Lenses (Optics) , Stainless steel , Geometry , Heat , Mass transfer , Multiscale modeling , Solidification , Transients (Dynamics)

Modeling Particle Spray and Capture Efficiency for Direct Laser Deposition Using a Four Nozzle Powder Injection System

Christopher Katinas, Weixiao Shang, Yung C. Shin, Jun Chen

MSEC 2017; V002T01A005doi:https://doi.org/10.1115/MSEC2017-2974

Abstract

View Article

PDF

Topics: Lasers , Modeling , Nozzles , Particulate matter , Sprays , Computer simulation , Simulation , Additive manufacturing , Flow (Dynamics) , Geometry

Development of Laser Polishing As an Auxiliary Post-Process to Improve Surface Quality in Fused Deposition Modeling Parts

Mario Perez Dewey, Durul Ulutan

MSEC 2017; V002T01A006doi:https://doi.org/10.1115/MSEC2017-3024

Abstract

View Article

PDF

Topics: Lasers , Modeling , Polishing , Surface quality , Additive manufacturing , Metals , Surface roughness , Carbon dioxide lasers , Design , Extruding

Additive Manufacturing Process Improvements for Part Functionality

Additive Manufacturing Thermo-Mechanical Processing Influence on Tensile Mechanical Behavior

Omar Fergani, Steven Liang, Mohamed Elmansori, Torgeir Welo

MSEC 2017; V002T01A007doi:https://doi.org/10.1115/MSEC2017-2624

Abstract

View Article

PDF

Efficient Process Planning Strategies for Additive Manufacturing

Uppili Srinivasan Venkatesan, S. S. Pande

MSEC 2017; V002T01A008doi:https://doi.org/10.1115/MSEC2017-2666

Abstract

View Article

PDF

Topics: Additive manufacturing , Production planning , Algorithms , Design , Computer-aided design , Genetic algorithms , Manufacturing , Materials properties , Optimization , Wall thickness

Effect of Different Heat Treatments on Mechanical Properties of Laser Sintered Additive Manufactured Parts

Sagar Sarkar, Cheruvu Siva Kumar, Ashish Kumar Nath

MSEC 2017; V002T01A009doi:https://doi.org/10.1115/MSEC2017-2769

Abstract

View Article

PDF

Topics: Additive manufacturing , Heat , Lasers , Mechanical properties , Wear , Anisotropy , Annealing , Heat treating (Metalworking) , Yield strength , Brittleness

Multi-Objective Build Orientation Optimization for Powder Bed Fusion by Laser

Salah Eddine Brika, Justin Mezzetta, Mathieu Brochu, Yaoyao Fiona Zhao

MSEC 2017; V002T01A010doi:https://doi.org/10.1115/MSEC2017-2796

Abstract

View Article

PDF

Topics: Lasers , Optimization , Mechanical properties , Surface roughness , Geometry , Graphical user interfaces , Heat , Optimization algorithms , Pareto optimization , Stress

Construction-Scale 3D Printing: Shape Stability of Fresh Printing Concrete

Ali Kazemian, Xiao Yuan, Ryan Meier, Evan Cochran, Behrokh Khoshnevis

MSEC 2017; V002T01A011doi:https://doi.org/10.1115/MSEC2017-2823

Abstract

View Article

PDF

Topics: Additive manufacturing , Concretes , Construction , Printing , Shapes , Stability , Manufacturing , Design , Deformation , Delays

Characterization of Lattice Structures for Additive Manufacturing of Lightweight Mechanical Components

Erica Liverani, Adrian H. A. Lutey, Alessandro Fortunato, Alessandro Ascari

MSEC 2017; V002T01A012doi:https://doi.org/10.1115/MSEC2017-2835

Abstract

View Article

PDF

Topics: Additive manufacturing , Stiffness , Biomedical engineering , Bone , Compression , Density , Elongation , Food packaging machinery , Stainless steel , Stress

Residual Stress Enhancement in 3D Printed Inconel 718 Superalloy Treated by Ultrasonic Nano-Crystal Surface Modification

Kuldeep Singh Sidhu, Jing Shi, Vijay K. Vasudevan, Seetha Ramaiah Mannava

MSEC 2017; V002T01A013doi:https://doi.org/10.1115/MSEC2017-2918

Abstract

View Article

PDF

Topics: Additive manufacturing , Nanocrystals , Stress , Superalloys , Alloys , Heat , Heat treating (Metalworking) , Lasers , Residual stresses , Corrosion resistance

Characterization of Material Behavior of the Fused Deposition Modeling Processed Parts

Madhukar Somireddy, Aleksander Czekanski

MSEC 2017; V002T01A014doi:https://doi.org/10.1115/MSEC2017-2949

Abstract

View Article

PDF

Process Development for a Robotized Laser Wire Additive Manufacturing

Meysam Akbari, Yaoyu Ding, Radovan Kovacevic

MSEC 2017; V002T01A015doi:https://doi.org/10.1115/MSEC2017-2951

Abstract

View Article

PDF

Topics: Additive manufacturing , Lasers , Wire , Metals , Robots , Aerospace industry , Biomedicine , Computer-aided design , Drops , Fiber lasers

Enhancing Mechanical Properties of Thin-Walled Structures Using Non-Planar Extrusion Based Additive Manufacturing

Abdullah T. Alsharhan, Timotei Centea, Satyandra K. Gupta

MSEC 2017; V002T01A016doi:https://doi.org/10.1115/MSEC2017-2978

Abstract

View Article

PDF

Topics: Additive manufacturing , Extruding , Mechanical properties , Thin wall structures , Anisotropy , Failure mechanisms , Fiber reinforced composites , Strength (Materials)

Process Effect on Part Surface Roughness in Powder-Bed Electron Beam Additive Manufacturing

Subin Shrestha, Y. Kevin Chou

MSEC 2017; V002T01A017doi:https://doi.org/10.1115/MSEC2017-3015

Abstract

View Article

PDF

Overhang Support Structure Design for Electron Beam Additive Manufacturing

Bo Cheng, Y. Kevin Chou

MSEC 2017; V002T01A018doi:https://doi.org/10.1115/MSEC2017-3018

Abstract

View Article

PDF

Topics: Additive manufacturing , Cathode ray oscilloscopes , Design , Electron beams , Deformation , Heat , Computer simulation , Design methodology , Energy dissipation , Metals

Effects of Post Weld Heat Treatments (PWHT) on Friction Stir Welded AA2219-T87 Joints

Mohammad W. Dewan, Muhammad A. Wahab, Khurshida Sharmin

MSEC 2017; V002T01A019doi:https://doi.org/10.1115/MSEC2017-3021

Abstract

View Article

PDF

Development of a New Laser-Assisted Additive Manufacturing Technology for Hybrid Functionally Graded Material Composites

Jung Sub Kim, Young Chang Kim, Sang Won Lee, Jeonghan Ko, Haseung Chung

MSEC 2017; V002T01A020doi:https://doi.org/10.1115/MSEC2017-3048

Abstract

View Article

PDF

Topics: Additive manufacturing , Composite materials , Functionally graded materials , Lasers , Graphene , Polymers , Sintering , Electrical conductivity , Electrical properties , Strength (Materials)

Dynamic Response of 3D-Printed Bi-Material Structure Using Drop Weight Impact Test

Anish Ravindra Amin, Yi-Tang Kao, Bruce L. Tai, Jyhwen Wang

MSEC 2017; V002T01A021doi:https://doi.org/10.1115/MSEC2017-3061

Abstract

View Article

PDF

Topics: Additive manufacturing , Dynamic response , Impact testing , Weight (Mass) , Absorption , Elastomers , Silicones , Load bearing capacity , Topology , Urethane elastomers

Advances in Micro- and Nano- Additive Manufacturing

Tool Path Planning for Directional Freezing Based 3D Nano Printing Process

Guanglei Zhao, Chi Zhou, Dong Lin

MSEC 2017; V002T01A022doi:https://doi.org/10.1115/MSEC2017-2684

Abstract

View Article

PDF

Topics: Freezing , Path planning , Printing , Nanostructures , Additive manufacturing , Heat , Temperature distribution , Heat transfer , Melting , Modeling

Development and Characterizations of Liquid Bridge Based Microstereolithography (LBMSL) System

Yanfeng Lu, Jeongwoo Lee, Sumanth Kashyap, Md. Omar Faruk Emon, Jae-Won Choi

MSEC 2017; V002T01A023doi:https://doi.org/10.1115/MSEC2017-2731

Abstract

View Article

PDF

Topics: Bridges (Structures) , Manufacturing , Photopolymers , Cathodic protection , Equilibrium (Physics) , Oxygen , Shapes , Viscosity

Active Mixing Nozzle for Multi-Material and Multi-Scale 3D Printing

Hongbo Lan

MSEC 2017; V002T01A024doi:https://doi.org/10.1115/MSEC2017-2779

Abstract

View Article

PDF

Topics: Additive manufacturing , Nozzles , Geometry , Biological tissues , Circuits , Computer simulation , Electrohydrodynamics , Electronics , Functionally graded materials , Metamaterials

Axial Control of Two-Photon Polymerization With Femtosecond Bessel Beam

Xiaoming Yu, Meng Zhang, Shuting Lei

MSEC 2017; V002T01A025doi:https://doi.org/10.1115/MSEC2017-2788

Abstract

View Article

PDF

Topics: Photons , Polymerization , Stereolithography , Additive manufacturing , Manufacturing , Wire , Computer simulation , Deformation , Dimensions , Fibers

Effect of Particle Shape on Neck Growth and Shrinkage of Nanoparticles

Elham Mirkoohi, Rajiv Malhotra

MSEC 2017; V002T01A026doi:https://doi.org/10.1115/MSEC2017-2811

Abstract

View Article

PDF

Deposition of Bead Arrays With Variable Diameter by Self-Focusing of Electrohydrodynamic Jets

Nicolas Martinez-Prieto, Gabriela Fratta, Jian Cao, Kornel Ehmann

MSEC 2017; V002T01A027doi:https://doi.org/10.1115/MSEC2017-2893

Abstract

View Article

PDF

Powder-Based Additive Manufacturing of Li-Ion Batteries and Micropowder Mixing Characteristics

Brandon Ludwig, Heng Pan, Jin Liu, Zhangfeng Zheng, Yan Wang

MSEC 2017; V002T01A028doi:https://doi.org/10.1115/MSEC2017-2900

Abstract

View Article

PDF

Topics: Additive manufacturing , Lithium-ion batteries , Electrodes , Batteries , Binders (Materials) , Bonding , Computer simulation , Drying , Energy storage , Evaporation

Investigation of Porosity and Mechanical Properties of Graphene Nanoplatelets Reinforced AlSi10Mg by Selective Laser Melting

Yachao Wang, Jing Shi, Shiqiang Lu, Weihan Xiao

MSEC 2017; V002T01A029doi:https://doi.org/10.1115/MSEC2017-2911

Abstract

View Article

PDF

On the Fatigue Performance of Nanoparticles Reinforced Iron by Selective Laser Melting

Yachao Wang, Jing Shi, Shiqiang Lu, Weihan Xiao

MSEC 2017; V002T01A030doi:https://doi.org/10.1115/MSEC2017-2913

Abstract

View Article

PDF

Study of Microscale Three-Dimensional Printing Using Near-Field Melt Electrospinning

Xiangyu You, Chengcong Ye, Ping Guo

MSEC 2017; V002T01A031doi:https://doi.org/10.1115/MSEC2017-2960

Abstract

View Article

PDF

Topics: Additive manufacturing , Electrospinning , Microscale devices , Fibers , Printing , Resolution (Optics) , Thin wall structures , Curved walls , Electric fields , Needles

Laser Sintering of Copper Nanoparticles: A Simplified Model for Fluence Estimation and Validation

Nilabh Roy, William Jou, He Feng, Jihoon Jeong, Yaguo Wang, Michael Cullinan

MSEC 2017; V002T01A032doi:https://doi.org/10.1115/MSEC2017-2975

Abstract

View Article

PDF

Topics: Copper , Fluence (Radiation measurement) , Lasers , Nanoparticles , Sintering , Inks , Aluminum , Delays , Electrical resistivity , Integrated circuits

Multi-Scale Stereolithography Using Shaped Beams

Huachao Mao, Yuen-Shan Leung, Yuanrui Li, Pan Hu, Wei Wu, Yong Chen

MSEC 2017; V002T01A033doi:https://doi.org/10.1115/MSEC2017-3031

Abstract

View Article

PDF

Topics: Stereolithography , Laser beams , Manufacturing , Microscale devices , Lasers , Path planning , Printing , Shapes , Surface quality

Structure of Electrospray Printed Deposits for Short Spray Times

Nicholas A. Brown, Yaqun Zhu, Ao Li, Mingfei Zhao, Xin Yong, Paul R. Chiarot

MSEC 2017; V002T01A034doi:https://doi.org/10.1115/MSEC2017-3032

Abstract

View Article

PDF

Topics: Sprays , Printing , Drops , Nanoparticles , Particulate matter , Inks , Electric charge , Electric fields , Evaporation , Flight

Investigation of the Correlation Between Micro-Scale Particle Distribution in 3D Printing and Macroscopic Composite Performance

Lu Lu, Erina Baynojir Joyee, Yayue Pan

MSEC 2017; V002T01A035doi:https://doi.org/10.1115/MSEC2017-3074

Abstract

View Article

PDF

Topics: Additive manufacturing , Composite materials , Microscale devices , Particulate matter , Polymers , Design , Parallel strand lumber , Anisotropy , Magnetic fields , Magnetization

Polarization Effect on Out of Plane Configured Nanoparticle Packing

Anil Yuksel, Michael Cullinan, Jayathi Murthy

MSEC 2017; V002T01A036doi:https://doi.org/10.1115/MSEC2017-3075

Abstract

View Article

PDF

Topics: Nanoparticles , Packings (Cushioning) , Polarization (Light) , Particulate matter , Polarization (Electricity) , Polarization (Waves) , Electric fields , Heat , Light sources , Manufacturing

Environmental Sustainability of Additive Manufacturing Processes

Measuring the Complexity of Additive Manufacturing Supply Chains

Ardeshir Raihanian Mashhadi, Sara Behdad

MSEC 2017; V002T01A037doi:https://doi.org/10.1115/MSEC2017-2871

Abstract

View Article

PDF

Topics: Additive manufacturing , Supply chains , Cycles , Manufacturing , Manufacturing systems , Manufacturing technology , Product design , Simulation , Supply chain management

Evaluation of Environmental Sustainability for Additive Manufacturing Batch Production

Yiran Yang, Lin Li

MSEC 2017; V002T01A038doi:https://doi.org/10.1115/MSEC2017-2957

Abstract

View Article

PDF

Topics: Additive manufacturing , Sustainability , Manufacturing , Emissions , Energy consumption , Health risk assessment , Performance

Dimensional Performance of As-Built Assemblies in Polyjet Additive Manufacturing Process

Azadeh Haghighi, Yiran Yang, Lin Li

MSEC 2017; V002T01A039doi:https://doi.org/10.1115/MSEC2017-2983

Abstract

View Article

PDF

Topics: Additive manufacturing , Manufacturing , Clearances (Engineering) , Design , Cycles , Mechanical admittance

Characterization of Particle Emission From Fuse Deposition Modeling Printers

Timothy R. Simon, Giovanny A. Aguilera, Fu Zhao

MSEC 2017; V002T01A040doi:https://doi.org/10.1115/MSEC2017-3007

Abstract

View Article

PDF

Topics: Emissions , Modeling , Particulate matter , Condensation , Extruding , Geometry , Heat , Honeycomb structures , National Institute of Standards and Technology , Pressure

Quality Assurance in Additive Manufacturing Systems: Integrated Sensing and Control

Monitoring of Molten Pool Thermal History and its Significance in Laser Cladding Process

Muvvala Gopinath, Debapriya Patra Karmakar, Ashish Kumar Nath

MSEC 2017; V002T01A041doi:https://doi.org/10.1115/MSEC2017-2657

Abstract

View Article

PDF

Topics: Cladding systems (Building) , Lasers , Cooling , Metals , Particulate matter , Coating processes , Coatings , Mechanical properties , Alloys , Bonding

Assessing the Geometric Integrity of Additive Manufactured Parts From Point Cloud Data Using Spectral Graph Theoretic Sparse Representation-Based Classification

M. Samie Tootooni, Ashley Dsouza, Ryan Donovan, Prahalad K. Rao, Zhenyu (James) Kong, Peter Borgesen

MSEC 2017; V002T01A042doi:https://doi.org/10.1115/MSEC2017-2794

Abstract

View Article

PDF

Topics: Additive manufacturing , Lasers , Extruding , Temperature , Eigenvalues , Experimental design , Geometric dimensioning and tolerancing , Geometry , Manufacturing , Modeling

Accelerated Geometry Accuracy Optimization of Additive Manufacturing Parts

Amir M. Aboutaleb, Linkan Bian, Prahalad K. Rao, Mark A. Tschopp

MSEC 2017; V002T01A043doi:https://doi.org/10.1115/MSEC2017-2892

Abstract

View Article

PDF

Topics: Additive manufacturing , Geometry , Optimization , Cutting , Geometric dimensioning and tolerancing , Manufacturing , Mechanical properties , Pareto optimization , Principal component analysis , Simulation

A Methodology for Predicting Porosity From Thermal Imaging of Melt Pools in Additive Manufacturing Thin Wall Sections

Mojtaba Khanzadeh, Sudipta Chowdhury, Linkan Bian, Mark A. Tschopp

MSEC 2017; V002T01A044doi:https://doi.org/10.1115/MSEC2017-2909

Abstract

View Article

PDF

Topics: Additive manufacturing , Imaging , Porosity , Thin wall structures , Lasers , Mechanical properties , Self-organization , Temperature distribution , X-rays

Measurement of the Melt Pool Length During Single Scan Tracks in a Commercial Laser Powder Bed Fusion Process

J. C. Heigel, B. M. Lane

MSEC 2017; V002T01A045doi:https://doi.org/10.1115/MSEC2017-2942

Abstract

View Article

PDF

Topics: Lasers , Machinery , Nickel alloys , Radiation (Physics) , Steady state , Temperature profiles

Additive Manufacturing (AM) of Flexible Electronic Devices: Online Monitoring of 3D Line Topology in Aerosol Jet Printing Process Using Shape-From-Shading (SfS) Image Analysis

Roozbeh (Ross) Salary, Jack P. Lombardi, Prahalad K. Rao, Mark D. Poliks

MSEC 2017; V002T01A046doi:https://doi.org/10.1115/MSEC2017-2947

Abstract

View Article

PDF

Topics: Additive manufacturing , Aerosols , Flexible electronics , Printing , Shades and shadows , Shapes , Topology , Algorithms , Performance characterization , Resolution (Optics)

Vision-Based Real-Time Layer Error Quantification for Additive Manufacturing

Haedong Jeong, Minsub Kim, Bumsoo Park, Seungchul Lee

MSEC 2017; V002T01A047doi:https://doi.org/10.1115/MSEC2017-2991

Abstract

View Article

PDF

Preliminary Testing of Temperature Measurements in Selective Laser Melting

Bo Cheng, Stephen Cooke, Y. Kevin Chou

MSEC 2017; V002T01A048doi:https://doi.org/10.1115/MSEC2017-3016

Abstract

View Article

PDF

Topics: Lasers , Melting , Temperature measurement , Testing , Temperature , Manufacturing , Additive manufacturing , Density , Dimensions , Wavelength

Materials

Advances in Composites Manufacturing Processes

Development of Hybrid Composites (Al-SiC-C) Through Stir Casting: Machinability Studies

Satyanarayana Kosaraju, Venu Gopal Anne, Swapnil Gosavi

MSEC 2017; V002T03A001doi:https://doi.org/10.1115/MSEC2017-2659

Abstract

View Article

PDF

Topics: Casting , Composite materials , Machinability , Surface roughness , Cutting , Alloys , Dynamometers , Graphite , Particulate matter , Ceramics

Studying the Mechanisms of High Rates of Tool Wear in the Machining of Aramid Honeycomb Composites

David D. Gill, Derek M. Yip-Hoi, Max Meaker, Taryn Boni, Erica L. Eggeman, Alex M. Brennan, Aidan Anderson

MSEC 2017; V002T03A002doi:https://doi.org/10.1115/MSEC2017-2694

Abstract

View Article

PDF

Topics: Composite materials , Honeycomb structures , Machining , Wear , Aerospace industry , Collapse , Stiffness , Wear testing , Weight (Mass)

Effect of Cryogenic Conditions on the Drilling Performance of Carbon-Carbon (C-C) Composites

Y.-Q. Wang, L.-S. Han, H.-B. Liu, K. Li, Y. Ma

MSEC 2017; V002T03A003doi:https://doi.org/10.1115/MSEC2017-2737

Abstract

View Article

PDF

Topics: Carbon , Composite materials , Drilling , Machining , Coolants , Anisotropy , Cooling , Delamination , Machinery , Nitrogen

In-Situ Observations and Pressure Measurements for Autoclave Co-Cure of Honeycomb Core Sandwich Structures

Mark Anders, Daniel Zebrine, Timotei Centea, Steven R. Nutt

MSEC 2017; V002T03A004doi:https://doi.org/10.1115/MSEC2017-2887

Abstract

View Article

PDF

Topics: Honeycomb structures , Pressure measurement , Sandwich structures , Composite materials , Pressure , Design , Desorption , Evacuations , Glass , Hardening (Curing)

Boundary Control on Embedded Heaters for Composite Joining

Brandon P. Smith, Mahdi Ashrafi, Mark E. Tuttle, Santosh Devasia

MSEC 2017; V002T03A005doi:https://doi.org/10.1115/MSEC2017-2895

Abstract

View Article

PDF

Topics: Composite materials , Joining , Temperature , Adhesives , Bonding , Hardening (Curing) , Heating , Temperature control

Interlaminar Toughening of GFRP: Part 1 — Improved Diffusion and Precipitation

Dakai Bian, Bradley R. Beeksma, D. J. Shim, Marshall Jones, Y. Lawrence Yao

MSEC 2017; V002T03A006doi:https://doi.org/10.1115/MSEC2017-2981

Abstract

View Article

PDF

Topics: Diffusion (Physics) , Glass reinforced plastics , Precipitation , Epoxy adhesives , Epoxy resins , Hardening (Curing) , Fracture (Materials) , Composite materials , Crack propagation , Fracture toughness

Interlaminar Toughening of GFRP: Part 2 — Characterization and Numerical Simulation of Curing Kinetics

Dakai Bian, Bradley R. Beeksma, D. J. Shim, Marshall Jones, Y. Lawrence Yao

MSEC 2017; V002T03A007doi:https://doi.org/10.1115/MSEC2017-2982

Abstract

View Article

PDF

Topics: Computer simulation , Glass reinforced plastics , Hardening (Curing) , Epoxy resins , Diffusion (Physics) , Precipitation , Bonding , Fibers , Fourier transform infrared spectroscopy , Geometry

Study of Chip Morphology and Chip Formation Mechanism During Machining of Magnesium-Based Metal Matrix Composites

Brian Davis, David Dabrow, Licheng Ju, Anhai Li, Chengying Xu, Yong Huang

MSEC 2017; V002T03A008doi:https://doi.org/10.1115/MSEC2017-3052

Abstract

View Article

PDF

Topics: Machining , Magnesium (Metal) , Metal matrix composites , Cutting , Particulate matter , Fracture (Materials) , Aerospace industry , Alloys , Equipment performance , Imaging

Advances in Materials and Manufacturing Processes for Energy Technologies

The Effects of Laser and Mechanical Forming on the Hardness and Microstructural Layout of Commercially Pure Grade 2 Titanium Alloy Plates

Kadephi V. Mjali, Annelize Els-Botes, Peter M. Mashinini

MSEC 2017; V002T03A009doi:https://doi.org/10.1115/MSEC2017-2603

Abstract

View Article

PDF

Topics: Lasers , Plates (structures) , Titanium alloys , Titanium , Heat , Mechanical properties , Cooling , Grain size , Heat flux , Temperature

Residual Stress Distribution and the Concept of Total Fatigue Stress in Laser and Mechanically Formed Commercially Pure Grade 2 Titanium Alloy Plates

Kadephi V. Mjali, Annelize Els-Botes, Peter M. Mashinini

MSEC 2017; V002T03A010doi:https://doi.org/10.1115/MSEC2017-2604

Abstract

View Article

PDF

Topics: Fatigue , Lasers , Plates (structures) , Stress , Stress concentration , Titanium alloys , Dislocations , Fatigue life , Residual stresses , Drilling

Energy Efficiency State Identification in Milling Processing Based on Improved HMM

Yun Cai, Hua Shao

MSEC 2017; V002T03A011doi:https://doi.org/10.1115/MSEC2017-2735

Abstract

View Article

PDF

Topics: Energy efficiency , Milling , Cutting , Energy levels (Quantum mechanics) , Expert systems , Machine tools , Machining , Manufacturing systems , Optimization , Probability

Improving the Energy Efficiency of Adsorption Chillers by Intensifying Thermal Management Systems in Sorbent Beds

Brian K. Paul, Kijoon Lee, Hailei Wang

MSEC 2017; V002T03A012doi:https://doi.org/10.1115/MSEC2017-2834

Abstract

View Article

PDF

Topics: Energy efficiency , Sorbents , Thermal management , Heat exchangers , Cooling , Cycles , Desorption , Microchannels , Refrigeration

Understanding Plastic Deformation Mechanism(s) in Recrystallized Zircaloy-4

N. Kumar, A. Alomari, K. L. Murty

MSEC 2017; V002T03A013doi:https://doi.org/10.1115/MSEC2017-2882

Abstract

View Article

PDF

Topics: Deformation , Stress , Alloys , Relaxation (Physics) , Temperature , Cladding systems (Building) , High temperature , Irradiation (Radiation exposure) , Neutrons , Nuclear fuels

Ultrasonic Pelleting and Synchronized Torrefaction of Cellulosic Biomass for Bioenergy Production

Yang Yang, Nicholas Eisenbarth, Xiaoxu Song, Meng Zhang, Donghai Wang

MSEC 2017; V002T03A014doi:https://doi.org/10.1115/MSEC2017-2894

Abstract

View Article

PDF

Topics: Bioenergy conversion , Biomass , Durability , Fuels , Heating , Biochar , Density , Coal , Co-firing , Electric power generation

Experimental Investigations on Surface Roughness, Cutting Forces and Tool Wear in Turning of Super Duplex Stainless Steel With Coated Carbide Inserts

Shirish Kadam, Rohit Khake, Sadaiah Mudigonda

MSEC 2017; V002T03A015doi:https://doi.org/10.1115/MSEC2017-3008

Abstract

View Article

PDF

Topics: Cutting , Stainless steel , Surface roughness , Turning , Wear , Coatings , Finishes , Impulse (Physics) , Machinability , Nanoindentation

Advances in Processing of Polymers and Polymer-Based Composites

Investigation of Structure-Property Relationships in Thermoplastic Polyurethane/Multiwalled Carbon Nanotube Composites

Felicia Stan, Catalin Fetecau, Nicoleta V. Stanciu, Razvan T. Rosculet, Laurentiu I. Sandu

MSEC 2017; V002T03A016doi:https://doi.org/10.1115/MSEC2017-2760

Abstract

View Article

PDF

Topics: Composite materials , Multi-walled carbon nanotubes , Urethane elastomers , Shear (Mechanics) , Electrical properties , Viscosity , Agglomeration (Materials) , Electrical conductivity , Extruding , Injection molding

Fabrication of Micro-Channels in PMMA by Tip-Based Microfabrication Technique: Depth and Friction Analysis

Felicia Stan, Catalin Fetecau, Nicoleta V. Stanciu

MSEC 2017; V002T03A017doi:https://doi.org/10.1115/MSEC2017-2763

Abstract

View Article

PDF

Topics: Friction , Manufacturing , Microchannels , Microfabrication , Stress , Geometry , Machinery

Conceptual Design of an Experiment for the International Space Station About Cosmic Ray Shielding Materials

F. Quadrini, L. Santo

MSEC 2017; V002T03A018doi:https://doi.org/10.1115/MSEC2017-2775

Abstract

View Article

PDF

Conceptual Design of an Experiment for the International Space Station About Shape Memory Composite in Space Environment

Loredana Santo, Denise Bellisario, Giovanni Matteo Tedde, Fabrizio Quadrini

MSEC 2017; V002T03A019doi:https://doi.org/10.1115/MSEC2017-2776

Abstract

View Article

PDF

New Model for Hyper-Elastic Materials Behavior With an Application on Natural Rubber

Ahmed G. Korba, Mark E. Barkey

MSEC 2017; V002T03A020doi:https://doi.org/10.1115/MSEC2017-2792

Abstract

View Article

PDF

Topics: Natural rubber , Errors , Shear (Mechanics) , Stress , Curve fitting , Deformation , Machinery , Matlab , Optimization , Tensile testing

The Effect of Polyethylene (Glycol) Diacrylate Post-Fabrication Rest Time on Compressive Properties

Ozlem Yasar, Serkan Inceoglu, Ramesh Prashad

MSEC 2017; V002T03A021doi:https://doi.org/10.1115/MSEC2017-2809

Abstract

View Article

PDF

Topics: Manufacturing , Mechanical properties , Biomaterials , Elastic moduli , Biocompatibility , Biological tissues , Mechanical testing , Solidification , Stability , Tissue engineering

Experimental Characterization of the Interaction Between Carbon Fiber Composite Prepregs During the Preforming Process

Weizhao Zhang, Zixuan Zhang, Jie Lu, Q. Jane Wang, Xuming Su, Danielle Zeng, Mansour Mirdamadi, Jian Cao

MSEC 2017; V002T03A022doi:https://doi.org/10.1115/MSEC2017-2973

Abstract

View Article

PDF

Topics: Carbon fibers , Composite materials , Experimental characterization , Resins , Compression molding , Design , Fibers , Geometry , Manufacturing , Modeling

Analysis of Cryogenically Treated Sheet Nylon 6/6

Derek Shaffer, Cody Reinstadtler, John T. Roth, Ihab Ragai

MSEC 2017; V002T03A023doi:https://doi.org/10.1115/MSEC2017-3039

Abstract

View Article

PDF

Topics: Nylon fabrics , Temperature , Polymers , Mechanical behavior , Testing , Cracking (Materials) , Fracture (Process) , Frequency response , Manufacturing , Materials properties

Surface and Sub-Surface Functionalization

Phase Transformations During High-Speed, High-Temperature Scratching of Silicon

Chirag Alreja, Sathyan Subbiah

MSEC 2017; V002T03A024doi:https://doi.org/10.1115/MSEC2017-2687

Abstract

View Article

PDF

Topics: High temperature , Phase transitions , Silicon , Temperature , Diamond turning , Crystals , Heat , Deformation , Diamond tools , Diamonds

Experimental Investigations for Wear Properties of Rapid Tooling With Nano Scale Fillers for Grinding Applications

Kamaljit Singh Boparai, Rupinder Singh

MSEC 2017; V002T03A025doi:https://doi.org/10.1115/MSEC2017-2710

Abstract

View Article

PDF

Topics: Fillers (Materials) , Grinding , Rapid tooling , Wear , Composite materials , Feedstock , Adhesives , Binders (Materials) , Biocompatibility , Fatigue

Static Recrystallization Behavior of a Nitrogen Controlled Z2CN19-10 Austenitic Stainless Steel

Min Luo, Chun Xu, Bing Zhou, Yan-hui Guo, Rong-bin Li

MSEC 2017; V002T03A026doi:https://doi.org/10.1115/MSEC2017-2746

Abstract

View Article

PDF

Topics: Nitrogen , Recrystallization , Stainless steel , Grain size , Steel , Temperature , Compression , Deformation , Grain boundaries , Stress

Ultrasonic Nano-Crystal Surface Modification Assisted Gas Nitriding of Ti6Al4V Alloy

Jun Liu, Zhencheng Ren, Chi Ma, Yalin Dong, Chang Ye

MSEC 2017; V002T03A027doi:https://doi.org/10.1115/MSEC2017-2847

Abstract

View Article

PDF

Effect of Binder Content on Hybrid Magnetic Tool Behavior

Max Stein, Hitomi Yamaguchi

MSEC 2017; V002T03A028doi:https://doi.org/10.1115/MSEC2017-2980

Abstract

View Article

PDF

Topics: Binders (Materials) , Particulate matter , Ceramics , Aluminum , Brittleness , Glues , Lasers , Lubricants , Magnetic fields , Magnetic particles

Fabrication and Characterization of a Biocompatible Coating Formed on a Heat-Treated Magnesium Alloy Using Micro-Arc Oxidation

Hamdy Ibrahim, Mohammad Elahinia

MSEC 2017; V002T03A029doi:https://doi.org/10.1115/MSEC2017-3080

Abstract

View Article

PDF

Topics: Biocompatibility , Coating processes , Coatings , Heat , Magnesium alloys , Manufacturing , Oxidation , Corrosion , Alloys , Corrosion resistance

Tribology of Material Removal/Deformation Processes and Machinery

Subsurface Microstructure and Crystallographic Texture in Surface Severe Plastic Deformation Processes

Zhiyu Wang, Christopher Saldana, Saurabh Basu

MSEC 2017; V002T03A030doi:https://doi.org/10.1115/MSEC2017-2915

Abstract

View Article

PDF

Topics: Deformation , Texture (Materials) , Surface deformation , Copper , Electrical conductivity , Electron backscatter diffraction , Fibers , Imaging , Laminates , Microscopy

Coolant Channel and Flow Characteristics of MQL Drill Bits: Experimental and Numerical Analyses

Yi-Tang Kao, Behrouz Takabi, Mozheng Hu, Bruce L. Tai

MSEC 2017; V002T03A031doi:https://doi.org/10.1115/MSEC2017-3060

Abstract

View Article

PDF

Topics: Bits (Tools) , Coolants , Flow (Dynamics) , Numerical analysis , Computational fluid dynamics , Lubrication , Cooling , Corners (Structural elements) , Drilling , Drills (Tools)

All Years

Proceedings Papers

Additive Manufacturing

Additive Manufacturing Process Improvements for Microstructure and Material Properties

Additive Manufacturing Process Improvements for Part Functionality

Advances in Micro- and Nano- Additive Manufacturing

Environmental Sustainability of Additive Manufacturing Processes

Quality Assurance in Additive Manufacturing Systems: Integrated Sensing and Control

Materials

Advances in Composites Manufacturing Processes

Advances in Materials and Manufacturing Processes for Energy Technologies

Advances in Processing of Polymers and Polymer-Based Composites

Surface and Sub-Surface Functionalization

Tribology of Material Removal/Deformation Processes and Machinery

Email alerts

Most Read Proceedings Papers in MSEC

Journals

Conference Proceedings

eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only