Volumes | International Manufacturing Science and Engineering Conference | American Society of Mechanical Engineers Digital Collection

Skip Nav Destination

ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing

June 4–8, 2017

Los Angeles, California, USA

Conference Sponsors:

ISBN:

978-0-7918-5072-5

In This Volume

Processes (69)

Volume 1: Processes

Processes

Advances and Challenges in Joining and Assembly Processes

Optimization of Friction Stir Welding Process Parameters to Join Al 5052 and Al 6061 Alloy Plates Using Grey-Taguchi Technique

R. Sandeep, D. Sudhakara, G. Prasanthi

MSEC 2017; V001T02A001doi:https://doi.org/10.1115/MSEC2017-2605

Abstract

View Article

PDF

Topics: Alloys , Friction , Optimization , Plates (structures) , Welding , Aluminum , Cracking (Materials) , Elongation , Fracture (Process) , Liquefaction

On-Line Detection of Friction Stir Welded Joints by High Temperature Phased Array Ultrasonic Inspection and Control of Weld Process Parameters

Daniel Huggett, Muhammad Wahab, T. W. Liao, Ayman Okeil

MSEC 2017; V001T02A002doi:https://doi.org/10.1115/MSEC2017-2692

Abstract

View Article

PDF

Topics: Friction , High temperature , Inspection , Welded joints , Nondestructive evaluation , Signals , Welding , Aluminum alloys , Computer software , Flaw detection

Analysis of Friction Stir Riveting Processes: A Review

Haris Ali Khan, Jingjing Li, Chenhui Shao

MSEC 2017; V001T02A003doi:https://doi.org/10.1115/MSEC2017-2700

Abstract

View Article

PDF

Topics: Friction , Riveting , Mechanical properties , Corrosion , Fatigue , Joining

Investigation of the Cleaning and Welding Steps From the Friction Element Welding Process

Jamie D. Skovron, Brandt J. Ruszkiewicz, Laine Mears, Tim Abke, Ankit Varma, Yuxin Li, Hongseok Choi, Xin Zhao

MSEC 2017; V001T02A004doi:https://doi.org/10.1115/MSEC2017-2786

Abstract

View Article

PDF

Topics: Friction , Welding , Steel , Aluminum , Joining , Temperature , Corporate average fuel economy , Design , Drills (Tools) , Energy consumption

Electrically Assisted Friction Stir Spot Welding of Aluminum Alloy to Advanced High Strength Steel

Kai Chen, Xun Liu, Jun Ni

MSEC 2017; V001T02A005doi:https://doi.org/10.1115/MSEC2017-2803

Abstract

View Article

PDF

Topics: Aluminum alloys , Friction , High strength steel , Welding , Aluminum , Steel , Atoms , Bulk solids flow , Cross section (Physics) , Diffusion (Physics)

Finite Element Analysis of the Friction Stir Forming Process

Sladjan Lazarevic, Scott Miller, Grant Kruger, Theo van Niekerk, Blair Carlson

MSEC 2017; V001T02A006doi:https://doi.org/10.1115/MSEC2017-3019

Abstract

View Article

PDF

Topics: Finite element analysis , Friction , Temperature , Aluminum , Cavities , Computer software , Deformation , Extruding , Finite element model , Optimization

Simulations of Microstructure Evolution During Friction Stir Blind Riveting Using a Cellular Automaton Method

Avik Samanta, Ninggang Shen, Haipeng Ji, Weiming Wang, Hongtao Ding, Jingjing Li

MSEC 2017; V001T02A007doi:https://doi.org/10.1115/MSEC2017-3034

Abstract

View Article

PDF

Topics: Engineering simulation , Friction , Riveting , Robots , Simulation , Deformation , Rivets , Recrystallization , Aluminum alloys , Heat

Investigation on the Effects of Process Parameters on Defect Formation in Friction Stir Welded Samples via Predictive Numerical Modeling and Experiments

Abhishek Ajri, Yung C. Shin

MSEC 2017; V001T02A008doi:https://doi.org/10.1115/MSEC2017-3092

Abstract

View Article

PDF

Topics: Computer simulation , Friction , Welding , Cavities , Flow (Dynamics) , Tunnels , Displacement , Finite element model , Temperature distribution

Advances in Assisted/Augmented Manufacturing Processes

Investigations on the Application of Minimum Quantity Solid Lubrication in Turning

Mayur A. Makhesana, Kaushik M. Patel

MSEC 2017; V001T02A009doi:https://doi.org/10.1115/MSEC2017-2654

Abstract

View Article

PDF

Topics: Lubrication , Turning , Cutting , Fluids , Machining , Heat , Lubricants , Wear , Energy consumption , Finishes

Assessment of Optical Performance of Aspheric Germanium Lens Manufactured Using Single Point Diamond Turning

Shivam Pradeep Yadav, Haseen Shaikh, Raju Shrihari Pawade

MSEC 2017; V001T02A010doi:https://doi.org/10.1115/MSEC2017-2691

Abstract

View Article

PDF

Topics: Diamond turning , Germanium , Lenses (Optics) , Manufacturing , Metrology , Errors , Instrumentation , Interferometers

Integrative Technology and Inspection Planning: A Case Study in Medical Industry

Fritz Klocke, Johannes Müller, Patrick Mattfeld, Jan Kukulies, Robert H. Schmitt

MSEC 2017; V001T02A011doi:https://doi.org/10.1115/MSEC2017-2755

Abstract

View Article

PDF

Topics: Biomedicine , Inspection , Manufacturing , Design , Aerospace industry , Risk

Ductile Regime Scratching of a Rock Sample in a Laser Assisted Machining Technique

Barkin Bakir, Hossein Mohammadi, John A. Patten

MSEC 2017; V001T02A012doi:https://doi.org/10.1115/MSEC2017-2758

Abstract

View Article

PDF

An Investigation of Electroplastic Drilling of Mild Steel

Brandt J. Ruszkiewicz, Farbod Akhavan Niaki, Laine Mears, Elizabeth Gendreau

MSEC 2017; V001T02A013doi:https://doi.org/10.1115/MSEC2017-2766

Abstract

View Article

PDF

Topics: Drilling , Steel , Cutting , Corporate average fuel economy , Fuel efficiency , Temperature , Electric current , Wear , Experimental design , Finite volume methods

Surface Grinding of Optical BK7/K9 Glass Using Rotary Ultrasonic Machining: An Experimental Study

Yingbin Hu, Hui Wang, Fuda Ning, Weilong Cong, Yuzhou Li

MSEC 2017; V001T02A014doi:https://doi.org/10.1115/MSEC2017-2780

Abstract

View Article

PDF

Topics: Glass , Grinding , Ultrasonic machining , Torque , Cutting , Machining , Vibration , Brittleness , Machinery , Wear

Rotary Ultrasonic Machining: Effects of Tool End Angle on Delamination of CFRP Drilling

Palamandadige K. S. C. Fernando, Meng (Peter) Zhang, Zhijian Pei, Weilong Cong

MSEC 2017; V001T02A015doi:https://doi.org/10.1115/MSEC2017-2863

Abstract

View Article

PDF

Topics: Carbon reinforced plastics , Delamination , Drilling , End effectors , Ultrasonic machining , Cutting , Machining , Torque , Aerospace industry , Aluminum

Development of Multi-Axis Laser-Assisted Milling Device

Dong-Hyeon Kim, Wan-Sik Woo, Won-Shik Chu, Sung-Hoon Ahn, Choon-Man Lee

MSEC 2017; V001T02A016doi:https://doi.org/10.1115/MSEC2017-2864

Abstract

View Article

PDF

Topics: Lasers , Milling , Machining , Cutting tools , Heat , Shapes , Cutting , Strength (Materials)

Experimental Evaluation of Cutting Kinematics and Chip Evacuation in Drilling With Low-Frequency Modulation-Assisted Machining

Yang Guo, James B. Mann

MSEC 2017; V001T02A017doi:https://doi.org/10.1115/MSEC2017-2886

Abstract

View Article

PDF

Topics: Cutting , Drilling , Evacuations , Kinematics , Machining , Stability , Drills (Tools) , Copper , Oscillations , Thrust

Experimental Tool Wear Observation of Assisted High Pressure Cryogenic Jet in Hard Turning Process

Dong Min Kim, Do Young Kim, In Su Jo, Tae Jin Song, Kyung Soo Paik, Hyung Wook Park

MSEC 2017; V001T02A018doi:https://doi.org/10.1115/MSEC2017-2935

Abstract

View Article

PDF

Topics: High pressure (Physics) , Turning , Wear , Ceramics , Cutting tools , Machining , Cooling , Computational fluid dynamics , Coolants , Cutting

Effect of Tempering Temperature on Hardness and Microstructure of Laser Surface Remelted AISI H13 Tool Steel

Debapriya Patra Karmakar, Muvvala Gopinath, Ashish Kumar Nath

MSEC 2017; V001T02A019doi:https://doi.org/10.1115/MSEC2017-3014

Abstract

View Article

PDF

Topics: Lasers , Temperature , Tool steel , High temperature , Quenching (Metalworking) , Surface hardening , Water , Fiber lasers , Forging , Friction

Electrically Assisted Drilling of Usibor 1500 Boron Steel and its Implications for Electrically Assisted Machining

Nived Govind Karumatt, Brandt J. Ruszkiewicz, Laine Mears

MSEC 2017; V001T02A020doi:https://doi.org/10.1115/MSEC2017-3046

Abstract

View Article

PDF

Topics: Boron , Drilling , Machining , Steel , Automotive industry , High strength steel , Wear , Bits (Tools) , Electric current , Temperature

Bending-Additive-Machining Hybrid Manufacturing of Sheet Metal Structures

Ye Li, Ragha Rapthadu

MSEC 2017; V001T02A021doi:https://doi.org/10.1115/MSEC2017-3062

Abstract

View Article

PDF

Topics: Machining , Manufacturing , Sheet metal , Additive manufacturing , Gravity (Force) , Hardening , Hinges , Innovation , Metals

Advances in Modeling, Analysis, and Simulation of Manufacturing Processes

Geometry-Driven Finite Element for Four-Dimensional Printing

Tsz-Ho Kwok

MSEC 2017; V001T02A022doi:https://doi.org/10.1115/MSEC2017-2621

Abstract

View Article

PDF

Topics: Finite element analysis , Geometry , Printing , Finite element methods , Design , Deformation , Shapes , Dimensions , Hardware , Manufacturing

Predicting Multi-Scale Dimensional Accuracy of Engine Cylinder by Honing

Zaoyang Zhou, Xueping Zhang, Zhenqiang Yao, Lifeng Xi

MSEC 2017; V001T02A023doi:https://doi.org/10.1115/MSEC2017-2673

Abstract

View Article

PDF

Topics: Abrasives , Cylinders , Engine cylinders , Engines , Friction , Geometry , Leakage , Microscale devices , Piston rings , Shapes

Controlling Topography of Machined Surface for Adhesive-Sealing

Shun Liu, Sun Jin, Xueping Zhang, Lixin Wang, Benfu Mei, Bin Hu

MSEC 2017; V001T02A024doi:https://doi.org/10.1115/MSEC2017-2674

Abstract

View Article

PDF

Topics: Adhesives , Sealing (Process) , Machining , Bonding , Materials properties , Adhesive joints , Aircraft , Dimensions , Engines , Geometry

Chatter Detection in Milling Process Based on Time-Frequency Analysis

Meng-Kun Liu, Quang M. Tran, Yi-Wen Qui, Chun-Hui Chung

MSEC 2017; V001T02A025doi:https://doi.org/10.1115/MSEC2017-2712

Abstract

View Article

PDF

Topics: Chatter , Milling , Time-frequency analysis , Machining , Approximation , Cutting , Fast Fourier transforms , Signals , Stability , Vibration

Induction Hardening Process With Preheat to Eliminate Cracking and Improve Quality of a Large Part With Various Wall Thickness

Zhichao (Charlie) Li, B. Lynn Ferguson

MSEC 2017; V001T02A026doi:https://doi.org/10.1115/MSEC2017-2721

Abstract

View Article

PDF

Topics: Cracking (Materials) , Electromagnetic induction , Fracture (Process) , Hardening , Wall thickness , Residual stresses , Heating , Modeling , Heat , Inductors

Study on the Generation and Redistribution Mechanism of Residual Stress in Bilateral Rolling Correction Process for Thin-Walled Parts

Laixiao Lu, Jie Sun, Kai Guo, Jianfeng Li

MSEC 2017; V001T02A027doi:https://doi.org/10.1115/MSEC2017-2741

Abstract

View Article

PDF

Topics: Aerospace industry , Aircraft , Aluminum alloys , Deformation , Finite element methods , Finite element model , Machining , Manufacturing , Residual stresses , Simulation results

Modeling of the Grinding Wheel Topography Depending on the Recipe-Dependent Volumetric Composition

Fritz Klocke, Sebastian Barth, Michael Rom, Christian Wrobel

MSEC 2017; V001T02A028doi:https://doi.org/10.1115/MSEC2017-2759

Abstract

View Article

PDF

Topics: Grinding wheels , Modeling , Grinding , Machining , Resins , Surface quality , Temperature

Investigation of the Effects of Microgrooved Cutting Tool in High Speed Machining of AISI 1045 Steel

Xingbang Chen, Nick H. Duong, J. Ma, Shuting Lei

MSEC 2017; V001T02A029doi:https://doi.org/10.1115/MSEC2017-2798

Abstract

View Article

PDF

Topics: Cutting tools , High speed machining , Steel , Cutting , Finite element methods , Machining , Energy conservation , Thrust

Thermal Load Determination in Dry Machining Through a Fixed Identifiability Conjugate Gradient Method

Patric Figueiredo, Marc Deppermann, Reinhold Kneer

MSEC 2017; V001T02A030doi:https://doi.org/10.1115/MSEC2017-2860

Abstract

View Article

PDF

Topics: Gradient methods , Machining , Stress , Heat flux , Heat , Algorithms , Boundary-value problems , Noise (Sound) , Scalars , Sensitivity analysis

Characterization of Machining Distortion due to Residual Stresses in Quenched Aluminum

Destiny R. Garcia, Michael R. Hill, Jan C. Aurich, Barbara S. Linke

MSEC 2017; V001T02A031doi:https://doi.org/10.1115/MSEC2017-2878

Abstract

View Article

PDF

Topics: Aluminum , Machining , Residual stresses , Aerospace industry , Shapes , Manufacturing , Forging , Geometry , Heat , Industrial research

Variable Damping Profiles for Laser Shock Peening Simulation Using Modal Analysis and the SEATD Method

Mohammad I. Hatamleh, Jagannathan Shankar Mahadevan, Arif S. Malik, Dong Qian

MSEC 2017; V001T02A032doi:https://doi.org/10.1115/MSEC2017-2891

Abstract

View Article

PDF

Topics: Damping , Laser hardening , Modal analysis , Simulation , Boundary-value problems , Equilibrium (Physics) , Finite element methods , Relaxation (Physics) , Aluminum alloys , Energy dissipation

Discrete Element Simulation of the Stress Wave in High Speed Milling

Yifei Jiang, Jun Zhang, Yong He, Hongguang Liu, Afaque Rafique Memon, Wanhua Zhao

MSEC 2017; V001T02A033doi:https://doi.org/10.1115/MSEC2017-2906

Abstract

View Article

PDF

CEL FEM Investigation of Effects of Microgrooved Cutting Tools in High Speed Machining of AISI 1045 Steel

Han Wu, Nick H. Duong, J. Ma, Shuting Lei

MSEC 2017; V001T02A034doi:https://doi.org/10.1115/MSEC2017-2932

Abstract

View Article

PDF

Topics: Cutting tools , Finite element model , High speed machining , Steel , Cutting , Temperature , Phase transitions , Computer software , Machining

Numerical Modeling of Metal-Based Additive Manufacturing Process Using Level Set Methods

Qian Ye, Shikui Chen

MSEC 2017; V001T02A035doi:https://doi.org/10.1115/MSEC2017-2939

Abstract

View Article

PDF

Topics: Additive manufacturing , Computer simulation , Metals , Computer technology , Design , Heat transfer , Laminar flow , Melting , Metal powders , Partial differential equations

Effects of Tool Nose Corner Radius and Main Cutting-Edge Radius on Cutting Temperature in Micro-Milling Inconel 718 Process

Xiaohong Lu, Hua Wang, Zhenyuan Jia, Likun Si, Steven Y. Liang

MSEC 2017; V001T02A036doi:https://doi.org/10.1115/MSEC2017-2997

Abstract

View Article

PDF

Topics: Corners (Structural elements) , Cutting , Micromilling , Temperature , Computer simulation , Computer software , Dimensions , Microscale devices , Wear

A New Method for the Prediction of Micro-Milling Tool Breakage

Xiaohong Lu, Haixing Zhang, Zhenyuan Jia, Yixuan Feng, Steven Y. Liang

MSEC 2017; V001T02A037doi:https://doi.org/10.1115/MSEC2017-2999

Abstract

View Article

PDF

Topics: Micromilling , Cutting , Stress , Bending (Stress) , Safety

Experimental and Numerical Analysis of Burn Marks and Shrinkage Effect on Injection Molding

Saeed Beheshtian Mesgaran, Farzad Elhami Nik, Seyyed Emad Seyyed Mousavi

MSEC 2017; V001T02A038doi:https://doi.org/10.1115/MSEC2017-3009

Abstract

View Article

PDF

Topics: Injection molding , Numerical analysis , Shrinkage (Materials) , Design , Finite element methods , Optimization , Computer software , Surface quality , Automobiles , Cooling

FEM Investigation of the Effects of Impact Speed and Angle of Impacts of Abrasive in the Vibration Assisted Nano Impact Machining by Loose Abrasives

Nick H. Duong, J. Ma, Shuting Lei

MSEC 2017; V001T02A039doi:https://doi.org/10.1115/MSEC2017-3043

Abstract

View Article

PDF

Topics: Abrasives , Finite element methods , Finite element model , Machining , Vibration , Atomic force microscopy , Abrasive machining , Brittleness , Computer software , Diamonds

Turning Force Prediction of AISI 4130 Considering Dynamic Recrystallization

Zhipeng Pan, Yixuan Feng, Xia Ji, Steven Y. Liang

MSEC 2017; V001T02A040doi:https://doi.org/10.1115/MSEC2017-3049

Abstract

View Article

PDF

Efficient Prediction of Contact Behavior in a 6-High Rolling Mill With Continuously Variable Crown Intermediate Rolls

Feng Zhang, Arif S. Malik

MSEC 2017; V001T02A041doi:https://doi.org/10.1115/MSEC2017-3058

Abstract

View Article

PDF

Topics: Rolling mills , Strips , Finite element methods , Alloys , Control systems , Finite element analysis , Gages , Manufacturing , Shapes , Simulation

Advances in Nontraditional Manufacturing Processes

Non-Contact Ultrasonic Abrasive Machining of Wire-Electrical Discharge Machined SUS304 Steel

K. L. Tan, S. H. Yeo

MSEC 2017; V001T02A042doi:https://doi.org/10.1115/MSEC2017-2626

Abstract

View Article

PDF

Topics: Abrasive machining , Steel , Wire , Cavitation , Cavitation erosion , Slurries , Bubbles , Finishing , Machining , Particulate matter

Study on Oil Adsorption and Polishing Characteristics by Novel Nanofiber Pad for Ultra-Precision Abrasive Machining

Wei Wu, Lei Ma, Toshiki Hirogaki, Eiichi Aoyama, Morihiko Ikegaya, Takatsugu Echizenya, Hiroyoshi Sota

MSEC 2017; V001T02A043doi:https://doi.org/10.1115/MSEC2017-2678

Abstract

View Article

PDF

Topics: Abrasive machining , Nanofibers , Polishing , Abrasives , Fibers , Biomedicine , Density , Grain size , Mass production , Molding

Investigation of the Water Guided Laser Micro-Jet Machining of Aero Engine Components

Zhigang Wang

MSEC 2017; V001T02A044doi:https://doi.org/10.1115/MSEC2017-2723

Abstract

View Article

PDF

Topics: Aircraft engines , Lasers , Machining , Water , Density , Cutting , Heat , Machinery

Surface Grinding of CFRP Composites Using Rotary Ultrasonic Machining: Effects of Ultrasonic Power

Hui Wang, Yingbin Hu, Fuda Ning, Yuzhou Li, Meng Zhang, Weilong Cong, Samantha Smallwood

MSEC 2017; V001T02A045doi:https://doi.org/10.1115/MSEC2017-2726

Abstract

View Article

PDF

Topics: Carbon reinforced plastics , Composite materials , Grinding , Ultrasonic machining , Machining , Cutting , Weight (Mass) , Anisotropy , Fatigue , Surface roughness

Control of Pressing Force in Magnetic Abrasive Finishing Using Permanent Magnet End-Mill Tool

Lei Ma, Toshiki Hirogaki, Eiichi Aoyama, Wei Wu, Tatsuya Furuki

MSEC 2017; V001T02A046doi:https://doi.org/10.1115/MSEC2017-2781

Abstract

View Article

PDF

Topics: Finishing , Permanent magnets , Pressing , Particulate matter , Iron , Shapes , Polishing , Steel , Abrasives , Cutting

Correlation of Process Parameters to Surface Integrity Responsible for Wear Resistance of HVOF Sprayed WC-Ni Coatings

X. P. Zhu, P. C. Du, Y. Meng, M. K. Lei, D. M. Guo

MSEC 2017; V001T02A047doi:https://doi.org/10.1115/MSEC2017-2927

Abstract

View Article

PDF

Topics: Coatings , Wear resistance , Manufacturing , Porosity , Wear , Elastic moduli , Fracture toughness , Fuels , Plasma spraying , Spraying (Coating processes)

Study on Key Methods of On-Machine Micro Milling Cutter Condition Inspection Based on Machine Vision

Xi Zhang, Benzheng Zhang, Yuanyuan Shi, Bo Shang

MSEC 2017; V001T02A048doi:https://doi.org/10.1115/MSEC2017-2965

Abstract

View Article

PDF

Topics: Inspection , Machinery , Milling , Cutting , Control equipment , Dimensions

Effect of Arc-Current and Particle Morphology on Fracture Toughness of Plasma Sprayed Aluminium Oxide Coating

Simanchal Kar, P. P. Bandyopadhyay, S. Paul

MSEC 2017; V001T02A049doi:https://doi.org/10.1115/MSEC2017-2993

Abstract

View Article

PDF

Topics: Aluminum , Fracture toughness , Oxide coatings , Particulate matter , Plasmas (Ionized gases) , Coating processes , Coatings , Melting , Particle size , Carbon steel

Laser Surface Engineering of Hierarchy Hydroxyapatite Aerogel for Bone Tissue Engineering

Pedram Parandoush, Hanxiong Fan, Xiaolei Song, Dong Lin

MSEC 2017; V001T02A050doi:https://doi.org/10.1115/MSEC2017-3035

Abstract

View Article

PDF

Tribological Properties of Textured Cemented Carbide Surfaces of Different Wettability Produced by Pulse Laser

Xiuqing Hao, Xiaolu Song, Liang Li, Ning He

MSEC 2017; V001T02A051doi:https://doi.org/10.1115/MSEC2017-3072

Abstract

View Article

PDF

Innovations in Materials Forming Processes

Combined Extrusion-Forging: Simulation, Experimental and Microscopic Investigation of Axisymmetric Single Collar Collet Chuck Holder

Srikar Potnuru, Susanta K. Sahoo, Santosh K. Sahoo

MSEC 2017; V001T02A052doi:https://doi.org/10.1115/MSEC2017-2615

Abstract

View Article

PDF

Topics: Extruding , Forging , Simulation , Stress , Flow (Dynamics) , Metals , Manufacturing , Aluminum , Computer software , Deformation

Ball Burnishing Under High Velocities Using a New Rolling Tool Concept

Lars Hiegemann, A. Erman Tekkaya

MSEC 2017; V001T02A053doi:https://doi.org/10.1115/MSEC2017-2644

Abstract

View Article

PDF

Topics: Flow (Dynamics) , Hydrostatics , Machinery , Milling , Milling machines , Rotation , Stress , Surface roughness

Influence of Dislocation Density and Solute Atoms Concentration on the Electroplastic Effect of Al-Cu Alloy

Weichao Wu, Chun Xu, Chaorun Si, Tian Xue

MSEC 2017; V001T02A054doi:https://doi.org/10.1115/MSEC2017-2690

Abstract

View Article

PDF

Topics: Alloys , Atoms , Dislocation density , Deformation , Dislocations , Magnification , Current density , Electric current

Mechanical Properties and Microstructures of A356 Alloy Prepared by Casting Combined With Forging

Zhenglong Liang, Qi Zhang

MSEC 2017; V001T02A055doi:https://doi.org/10.1115/MSEC2017-2715

Abstract

View Article

PDF

Topics: Alloys , Casting , Forging , Mechanical properties , Microhardness , Tensile strength , Elongation , Fatigue , Optical microscopes , Porosity

Analysis of Innovative Incremental Cold Forming Process for the Manufacturing of Aerospace Rotating Parts

Marcos Pérez

MSEC 2017; V001T02A056doi:https://doi.org/10.1115/MSEC2017-2774

Abstract

View Article

PDF

Topics: Aerospace industry , Manufacturing , Work hardening , Flanges , Forging , Buckling , Stress , Heat , Mechanical testing , Anisotropy

Impact of Non-Isothermal Warm Rolling on Microstructure, Texture and Mechanical Properties

Chun Xu, Xing-zhou An, Xiao-hua Rao, Ya-nan Li

MSEC 2017; V001T02A057doi:https://doi.org/10.1115/MSEC2017-2797

Abstract

View Article

PDF

Topics: Mechanical properties , Texture (Materials) , Temperature , Recrystallization , Deformation , Elongation

Analytical and Experimental Evaluation of Flow Characteristics of Annealed AISI 304 Stainless Steel Sheet in Multi-Scale Bulge Forming

Ayotunde Olayinka, William J. Emblom, Scott W. Wagner

MSEC 2017; V001T02A058doi:https://doi.org/10.1115/MSEC2017-2826

Abstract

View Article

PDF

Topics: Flow (Dynamics) , Stainless steel , Materials properties , Microscale devices , Analytical methods , Domes (Structural elements) , Engineering simulation , Finite element analysis , Simulation

Predicting Sheet Forming Limit of Aluminum Alloys for Cold and Warm Forming by Developing a Ductile Failure Criterion

Z. Q. Sheng, P. K. Mallick

MSEC 2017; V001T02A059doi:https://doi.org/10.1115/MSEC2017-2956

Abstract

View Article

PDF

Bending Mechanism Analysis for Laser Forming of Metal Foam

Tizian Bucher, Adelaide Young, Min Zhang, Chang Jun Chen, Y. Lawrence Yao

MSEC 2017; V001T02A060doi:https://doi.org/10.1115/MSEC2017-3026

Abstract

View Article

PDF

Topics: Lasers , Metal foams , Computer simulation , Shapes , Sheet metal , Temperature gradient , Compression , Engineering systems and industry applications , Experimental analysis , Sheet metal work

Material Flow Analysis for the Incremental Sheet-Bulk Gearing by Rotating Tools

Sebastian Wernicke, Peter Sieczkarek, Joshua Grodotzki, Soeren Gies, Nooman Ben Khalifa, A. Erman Tekkaya

MSEC 2017; V001T02A061doi:https://doi.org/10.1115/MSEC2017-3029

Abstract

View Article

PDF

Topics: Flow (Dynamics) , Gears , Manufacturing , Metalworking , Stress , Finite element analysis , Mechanical properties , Shapes , Steel

The Effect of Multi-Point Electrical Paths on Global Springback Elimination in Single Point Incremental Forming

Jacklyn Niebauer, Derek Shaffer, Ihab Ragai, John T. Roth

MSEC 2017; V001T02A062doi:https://doi.org/10.1115/MSEC2017-3036

Abstract

View Article

PDF

Topics: Aerospace industry , Current density , Deformation , Geometry , Manufacturing , Residual stresses , Sheet metal , Stress concentration , Testing

The Effects of Polarity and Current Path in Electrically Assisted Single Point Incremental Forming of 2024-T3 Aluminum

Tyler J. Grimm, Ihab Ragai, John T. Roth

MSEC 2017; V001T02A063doi:https://doi.org/10.1115/MSEC2017-3037

Abstract

View Article

PDF

Topics: Aluminum , Electric current , Electrodes

Experimental Investigation of Key Process Parameters During Continuous-Bending-Under-Tension of AA6022-T4

Edward M. Momanyi, Timothy J. Roemer, Brad L. Kinsey, Yannis P. Korkolis

MSEC 2017; V001T02A064doi:https://doi.org/10.1115/MSEC2017-3045

Abstract

View Article

PDF

Topics: Tension , Elongation , Fracture (Materials) , Fracture (Process) , Gages , Aluminum alloys , Cycles , Delays , Necking , Rollers

Scalable Nanomanufacturing Processes

Electrospun Sodium-Cobalt Oxide Ceramic Nanofiber and the Electromagnetic Responses

Arturo G. Bautista, Juan A. Aguado, Yong X. Gan

MSEC 2017; V001T02A065doi:https://doi.org/10.1115/MSEC2017-2638

Abstract

View Article

PDF

Topics: Cobalt , Nanofibers , Oxide ceramics , Sodium , Fibers , Electromagnetic fields , Biomedical engineering , Carbon dioxide , Celsius scale , Ceramic composites

Design and Fabrication of Electrostatic Microcolumn With Varying Apertures in Massively Parallel Electron Beam Lithography

Zhidong Du, Ye Wen, Liang Pan

MSEC 2017; V001T02A066doi:https://doi.org/10.1115/MSEC2017-2681

Abstract

View Article

PDF

Topics: Cathode ray oscilloscopes , Design , Electron beams , Lithography , Manufacturing , Resolution (Optics) , Electrodes , Nanoscale phenomena , Photoemission , Semiconductor industry

Rapid Intense Pulse Light Sintering of Copper Sulphide Nanoparticle Films

Shalu Bansal, Zhongwei Gao, Chih-hung Chang, Rajiv Malhotra

MSEC 2017; V001T02A067doi:https://doi.org/10.1115/MSEC2017-2739

Abstract

View Article

PDF

Topics: Copper , Nanoparticles , Sintering , Thin films , Electrical properties , Coatings , Crystal structure , Electronics , Metals , Semiconductors (Materials)

Design of a Tip Based In-Line Metrology System for Roll-to-Roll Manufactured Flexible Electronic Devices

Liam G. Connolly, Michael Cullinan

MSEC 2017; V001T02A068doi:https://doi.org/10.1115/MSEC2017-2972

Abstract

View Article

PDF

Topics: Design , Flexible electronics , Metrology , Atomic force microscopy , Bending (Stress) , Finite element analysis , Manufacturing , Resolution (Optics) , Electronics , Flaw detection

Graphene Growth on and Transfer From Platinum Thin Films

Joon Hyong Cho, Michael Cullinan

MSEC 2017; V001T02A069doi:https://doi.org/10.1115/MSEC2017-3059

Abstract

View Article

PDF

Topics: Graphene , Platinum , Thin films , Adhesion , Alloys , Chemical vapor deposition , Metals , Microelectromechanical systems , Nanoelectromechanical systems , Secondary ion mass spectrometry

All Years

Proceedings Papers

Processes

Advances and Challenges in Joining and Assembly Processes

Advances in Assisted/Augmented Manufacturing Processes

Advances in Modeling, Analysis, and Simulation of Manufacturing Processes

Advances in Nontraditional Manufacturing Processes

Innovations in Materials Forming Processes

Scalable Nanomanufacturing Processes

Email alerts

Most Read Proceedings Papers in MSEC

Journals

Conference Proceedings

eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only