Volumes | International Manufacturing Science and Engineering Conference | American Society of Mechanical Engineers Digital Collection

Topics: Additive manufacturing , Carbon reinforced plastics , Composite materials , Modeling , Tensile strength , Bearings , Carbon fibers , Engineering prototypes , Feedstock , Machinery

Design and Modeling of a Microscale Selective Laser Sintering System

Nilabh Roy, Anil Yuksel, Michael Cullinan

MSEC 2016; V003T08A002doi:https://doi.org/10.1115/MSEC2016-8569

Abstract

View Article

PDF

Topics: Design , Lasers , Microscale devices , Modeling , Sintering , Additive manufacturing , Metals , Heat transfer , Nanoparticles , Nanoscale phenomena

Simulation of Cross-Sectional Geometry During Laser Powder Deposition of Tall Thin-Walled and Thick-Walled Features

Keith A. Bourne, Parisa Farahmand, David Roberson

MSEC 2016; V003T08A003doi:https://doi.org/10.1115/MSEC2016-8623

Abstract

View Article

PDF

Topics: Geometry , Lasers , Simulation , Nozzles , Shapes , Calibration , Errors , Failure , Stainless steel

Solution and Aging Treatments of Inconel 718/TiC Nanocomposite From Selective Laser Melting

Yachao Wang, Jing Shi, Shiqiang Lu, Yun Wang

MSEC 2016; V003T08A004doi:https://doi.org/10.1115/MSEC2016-8684

Abstract

View Article

PDF

Topics: Lasers , Melting , Nanocomposites , Annealing , Composite materials , Mechanical properties , Metal matrix composites , Tensile strength , Cooling , Heat treating (Metalworking)

Identifying Uncertainty in Laser Powder Bed Fusion Models

Felipe Lopez, Paul Witherell, Brandon Lane

MSEC 2016; V003T08A005doi:https://doi.org/10.1115/MSEC2016-8692

Abstract

View Article

PDF

Topics: Lasers , Uncertainty , Simulation , Accuracy and precision , Additive manufacturing , Algorithms , Approximation , Calibration , Errors , Modeling

Artificial Neural Network Based Geometric Compensation for Thermal Deformation in Additive Manufacturing Processes

Sushmit Chowdhury, Sam Anand

MSEC 2016; V003T08A006doi:https://doi.org/10.1115/MSEC2016-8784

Abstract

View Article

PDF

Topics: Additive manufacturing , Artificial neural networks , Thermal deformation , Deformation , Polymers , Algorithms , Alloys , Computer-aided design , Design , Extruding

Carbon Nanotube Reinforced Fused Deposition Modeling Using Microwave Irradiation

Meng Zhang, Xiaoxu Song, Weston Grove, Emmett Hull, Z. J. Pei, Fuda Ning, Weilong Cong

MSEC 2016; V003T08A007doi:https://doi.org/10.1115/MSEC2016-8790

Abstract

View Article

PDF

Topics: Carbon nanotubes , Irradiation (Radiation exposure) , Microwaves , Modeling , Additive manufacturing , Adhesion , Bonding , Computer-aided design , Delamination , Electrical resistivity

Loading-Unloading Cycles of 3D-Printing Built Bi-Material Structures With Ceramic and Elastomer

Yi-Tang Kao, Ying Zhang, Jyhwen Wang, Bruce L. Tai

MSEC 2016; V003T08A008doi:https://doi.org/10.1115/MSEC2016-8791

Abstract

View Article

PDF

Topics: Additive manufacturing , Ceramics , Cycles , Elastomers , Silicones , Stiffness , Deflection , Brittleness , Crack propagation , Deformation

Stress and Deformation Evaluations of Scanning Strategy Effect in Selective Laser Melting

Bo Cheng, Subin Shrestha, Y. Kevin Chou

MSEC 2016; V003T08A009doi:https://doi.org/10.1115/MSEC2016-8819

Abstract

View Article

PDF

Topics: Deformation , Lasers , Melting , Stress , Finite element methods , Geometry , Heat , Laser beams , Residual stresses , Temperature

Parameter Study on 3D-Printing Graphene Oxidize Based on Directional Freezing

Feng Zhang, Feng Yang, Dong Lin, Chi Zhou

MSEC 2016; V003T08A010doi:https://doi.org/10.1115/MSEC2016-8846

Abstract

View Article

PDF

Topics: Additive manufacturing , Freezing , Graphene , Printing , Nanomaterials , Bonding , Carbon , Cycles , Mechanical properties , Performance

Thermal Analysis on Directional Freezing of Nano Aqueous Suspensions in Graphene Aerogel 3D Printing Process

Guanglei Zhao, Chi Zhou, Dong Lin

MSEC 2016; V003T08A011doi:https://doi.org/10.1115/MSEC2016-8863

Abstract

View Article

PDF

Topics: Additive manufacturing , Freezing , Graphene , Thermal analysis , Geometry , Reliability , Temperature , Heat transfer , Inks , Simulation results

David Dornfeld Memorial Symposium

Sustainable Process Planning for Subtractive and Additive Manufacturing Unit Processes

Barbara Linke, Destiny Garcia, Gurpreet Kaur, Farhad Ghadamli

MSEC 2016; V003T08A012doi:https://doi.org/10.1115/MSEC2016-8517

Abstract

View Article

PDF

Topics: Additive manufacturing , Production planning , Sustainability , Chain , Design , Machining , Manufacturing , Quality control , Students , Water

A New Approach for Online Monitoring of Additive Manufacturing Based on Acoustic Emission

Haixi Wu, Zhonghua Yu, Yan Wang

MSEC 2016; V003T08A013doi:https://doi.org/10.1115/MSEC2016-8551

Abstract

View Article

PDF

Topics: Acoustic emissions , Additive manufacturing , Failure , Algorithms , Extruding , Failure mechanisms , Machinery , Manufacturing , Modeling , Polymers

Research on Ultrasonic Aided Fixed-Abrasive Lapping Technology for Engineering Ceramics Cylindrical Part

Feng Jiao, Bo Zhao

MSEC 2016; V003T08A014doi:https://doi.org/10.1115/MSEC2016-8564

Abstract

View Article

PDF

Topics: Ceramics , Grinding , Vibration , Machining , Cutting , Surface quality , Blanks , Brittleness , Optical glass , Particulate matter

A Hybrid RF-GA Approach to Bottleneck Machine Diagnosis and Suggestion in Parallel Machine Job-Shop Scheduling

Manik Rajora, Pan Zou, Steven Liang

MSEC 2016; V003T08A015doi:https://doi.org/10.1115/MSEC2016-8586

Abstract

View Article

PDF

Topics: Machine shops , Machinery , Algorithms , Weight (Mass) , Genetic algorithms , Workshops (Work spaces)

Automating Asset Knowledge With MTConnect

Sid Venkatesh, Sidney Ly, Martin Manning, John Michaloski, Fred Proctor

MSEC 2016; V003T08A016doi:https://doi.org/10.1115/MSEC2016-8629

Abstract

View Article

PDF

Topics: Aerospace industry , Data acquisition , Machinery , Manufacturing , Production facilities

Agent Based Simulation Optimization of Waste Electrical and Electronics Equipment Recovery

Ardeshir Raihanian Mashhadi, Sara Behdad, Jun Zhuang

MSEC 2016; V003T08A017doi:https://doi.org/10.1115/MSEC2016-8639

Abstract

View Article

PDF

Topics: Electronics , Optimization , Simulation , Cycles , Uncertainty , Data collection , Electronic products , Profitability

Solutions for Sustainable Machining

Eckart Uhlmann, Bernd Peukert, Simon Thom, Lukas Prasol, Paul Fürstmann, Fiona Sammler, Sebastian Richarz

MSEC 2016; V003T08A018doi:https://doi.org/10.1115/MSEC2016-8642

Abstract

View Article

PDF

Topics: Machining , Sustainability , Machine tools , Cutting tools , Aerospace industry , Alloys , Ceramics , Cooling , Cutting , Developing nations

A Method to Optimize Value Recovery From End-of-Life Products

Liang Cong, Fu Zhao, John W. Sutherland

MSEC 2016; V003T08A019doi:https://doi.org/10.1115/MSEC2016-8682

Abstract

View Article

PDF

Topics: Decision making , Disks , Risk , Strategic materials

Energy Mapping and Optimization in Rough Machining of Impellers

Zhenhua Wu, Marthony Hobgood, Mathias Wolf

MSEC 2016; V003T08A020doi:https://doi.org/10.1115/MSEC2016-8719

Abstract

View Article

PDF

Topics: Impellers , Machining , Optimization , Surface roughness , Energy consumption , Ball mills , Cutting , Blades , Computer numerical control machine tools , Computer-aided manufacturing

One Touch Workpiece Verification System for CNC Machining Using a Low-Cost Computer Vision Approach

Maxwell K. Micali, Hayley M. Cashdollar, Zachary T. Gima, Mitchell T. Westwood

MSEC 2016; V003T08A021doi:https://doi.org/10.1115/MSEC2016-8725

Abstract

View Article

PDF

Topics: Computer numerical control machine tools , Computers , Machining , Cycles , Errors , Fixturing , Geometry , Algorithms , Computer-aided design , Control equipment

Sustainable Design and Analysis of CNC Machine Tools: Sustainable Design Index Based Approach and its Application Perspectives

Fan Fang, Kai Cheng, Hui Ding, Shijin Chen, Liang Zhao

MSEC 2016; V003T08A022doi:https://doi.org/10.1115/MSEC2016-8730

Abstract

View Article

PDF

Topics: Computer numerical control machine tools , Green design , Design , Sustainability , Emissions , Pollution , Computer-aided design , Computer-aided engineering , Economics , Energy consumption

A Comparative Analysis Between High Speed Dynamic and Traditional Pocketing Toolpaths in Precision Milling Machines

Gustavo M. Minquiz, Vicente Borja, Marcelo López-Parra, David Dornfeld, Pablo Flores

MSEC 2016; V003T08A023doi:https://doi.org/10.1115/MSEC2016-8746

Abstract

View Article

PDF

Topics: Carbon , Emissions , Energy consumption , Milling , Milling machines , Wear

Composability of Unit Manufacturing Process Models for Manufacturing Systems Analysis

Matteo M. Smullin, Ian C. Garretson, Karl R. Haapala

MSEC 2016; V003T08A024doi:https://doi.org/10.1115/MSEC2016-8804

Abstract

View Article

PDF

Topics: Manufacturing , Manufacturing systems , Sustainability , Modeling , Flow (Dynamics)

Sensorless Monitoring of Cutting Force Variation With Fractured Tool Under Heavy Cutting Condition

Yuki Yamada, Yasuhiro Kakinuma, Takamichi Ito, Jun Fujita, Hirohiko Matsuzaki

MSEC 2016; V003T08A025doi:https://doi.org/10.1115/MSEC2016-8820

Abstract

View Article

PDF

Topics: Cutting , Fracture (Materials) , Fracture (Process) , Condition monitoring , Engines , Friction , Machine tools , Milling , Motors , Signal processing

An Environmental and Cost Analysis of Stamping Sheet Metal Parts

Daniel R. Cooper, Kathleen E. Rossie, Timothy G. Gutowski

MSEC 2016; V003T08A026doi:https://doi.org/10.1115/MSEC2016-8880

Abstract

View Article

PDF

Topics: Metal stamping , Sheet metal , Power presses , Casting , Climate change , Engineers , Gates (Closures) , Iron , Surfaces (Materials)

All Years

Joint MSEC-NAMRC Symposia

Additive Manufacturing Symposium

Additive Manufacturing of CFRP Composites Using Fused Deposition Modeling: Effects of Process Parameters

Design and Modeling of a Microscale Selective Laser Sintering System

Simulation of Cross-Sectional Geometry During Laser Powder Deposition of Tall Thin-Walled and Thick-Walled Features

Solution and Aging Treatments of Inconel 718/TiC Nanocomposite From Selective Laser Melting

Identifying Uncertainty in Laser Powder Bed Fusion Models

Artificial Neural Network Based Geometric Compensation for Thermal Deformation in Additive Manufacturing Processes

Carbon Nanotube Reinforced Fused Deposition Modeling Using Microwave Irradiation

Loading-Unloading Cycles of 3D-Printing Built Bi-Material Structures With Ceramic and Elastomer

Stress and Deformation Evaluations of Scanning Strategy Effect in Selective Laser Melting

Parameter Study on 3D-Printing Graphene Oxidize Based on Directional Freezing

Thermal Analysis on Directional Freezing of Nano Aqueous Suspensions in Graphene Aerogel 3D Printing Process

David Dornfeld Memorial Symposium

Sustainable Process Planning for Subtractive and Additive Manufacturing Unit Processes

A New Approach for Online Monitoring of Additive Manufacturing Based on Acoustic Emission

Research on Ultrasonic Aided Fixed-Abrasive Lapping Technology for Engineering Ceramics Cylindrical Part

A Hybrid RF-GA Approach to Bottleneck Machine Diagnosis and Suggestion in Parallel Machine Job-Shop Scheduling

Automating Asset Knowledge With MTConnect

Agent Based Simulation Optimization of Waste Electrical and Electronics Equipment Recovery

Solutions for Sustainable Machining

A Method to Optimize Value Recovery From End-of-Life Products

Energy Mapping and Optimization in Rough Machining of Impellers

One Touch Workpiece Verification System for CNC Machining Using a Low-Cost Computer Vision Approach

Sustainable Design and Analysis of CNC Machine Tools: Sustainable Design Index Based Approach and its Application Perspectives

A Comparative Analysis Between High Speed Dynamic and Traditional Pocketing Toolpaths in Precision Milling Machines

Composability of Unit Manufacturing Process Models for Manufacturing Systems Analysis

Sensorless Monitoring of Cutting Force Variation With Fractured Tool Under Heavy Cutting Condition

An Environmental and Cost Analysis of Stamping Sheet Metal Parts

Email alerts

Most Read Proceedings Papers in MSEC

Journals

Conference Proceedings

eBooks

Resources

Opportunities

Proceedings Papers

Joint MSEC-NAMRC Symposia

Additive Manufacturing Symposium

David Dornfeld Memorial Symposium

Email alerts

Most Read Proceedings Papers in MSEC

Journals

Conference Proceedings

eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only