Volumes | International Manufacturing Science and Engineering Conference | American Society of Mechanical Engineers Digital Collection

Volume 2: Materials; Biomanufacturing; Properties, Applications and Systems; Sustainable Manufacturing

Materials

Advances in Experiments and Modeling of Micromechanics and Microstructure Evolution in Manufacturing Processes

Effect of Surface Roughness and Residual Stress Induced by High Speed Milling Process on Short Crack Growth

MSEC 2016; V002T01A001https://doi.org/10.1115/MSEC2016-8503

View Articletitled, Effect of Surface Roughness and Residual Stress Induced by High Speed Milling Process on Short Crack Growth

PDF

Topics: Fracture (Materials) , Milling , Stress , Surface roughness , Damage , Residual stresses , Aluminum alloys , Cutting , Fatigue cracks , Machining

Effect of Multi-Layer Laser Heating on the Microstructure and Microhardness of Laser Hot-Wire Deposited FV520B Steel

Shaopeng Wei, Gang Wang, Zilin Huang, Peng Wen, Yiming Rong

MSEC 2016; V002T01A002https://doi.org/10.1115/MSEC2016-8580

Abstract

View Articletitled, Effect of Multi-Layer Laser Heating on the Microstructure and Microhardness of Laser Hot-Wire Deposited FV520B Steel

PDF

Topics: Heating , Lasers , Microhardness , Steel , Wire , Heat , Coatings , Hardening , Stainless steel , Cladding systems (Building)

Finite Element Modeling of Selective Laser Melting 316L Stainless Steel Parts for Evaluating the Mechanical Properties

Arman Ahmadi, Narges Shayesteh Moghaddam, Mohammad Elahinia, Haluk E. Karaca, Reza Mirzaeifar

MSEC 2016; V002T01A003https://doi.org/10.1115/MSEC2016-8594

Abstract

View Articletitled, Finite Element Modeling of Selective Laser Melting 316L Stainless Steel Parts for Evaluating the Mechanical Properties

PDF

Topics: Finite element analysis , Lasers , Mechanical properties , Melting , Modeling , Stainless steel , Grain boundaries , Finite element model , Fracture (Materials) , Fracture (Process)

Microstructure Engineering of Commercially Pure Ni Sheets to Enhance Micro-Deep Drawing Formability

Marzyeh Moradi, M. Ravi Shankar

MSEC 2016; V002T01A004https://doi.org/10.1115/MSEC2016-8609

Abstract

View Articletitled, Microstructure Engineering of Commercially Pure Ni Sheets to Enhance Micro-Deep Drawing Formability

PDF

Topics: Blanks , Deformation , Delays , Failure , Flow (Dynamics) , Heat treating (Metalworking) , Imaging , Micromechanics (Engineering) , Microscopy , Performance

Effects of Laser Shock Peening on the Wear and Degradation Behaviors of Magnesium Alloys

Ruixia Zhang, Xiaoning Hou, Xianfeng Zhou, Hongyu Gao, Steven Mankoci, Haifeng Qin, Zhencheng Ren, Gary L. Doll, Ashlie Martini, Yalin Dong, Nita Sahai, Chang Ye

MSEC 2016; V002T01A005https://doi.org/10.1115/MSEC2016-8689

Abstract

View Articletitled, Effects of Laser Shock Peening on the Wear and Degradation Behaviors of Magnesium Alloys

PDF

Topics: Laser hardening , Magnesium alloys , Wear , Mechanical properties , Vickers hardness testing , Fluids , Testing , Wear resistance , Weight (Mass) , Yield strength

Ultrasonic Nanocrystal Surface Modification Assisted Nitriding: An Experimental Study

Jingyi Zhao, Zhencheng Ren, Yang Liu, Xiahan Sang, Xiaoning Hou, G.-X. Wang, Yalin Dong, Chang Ye

MSEC 2016; V002T01A006https://doi.org/10.1115/MSEC2016-8701

Abstract

View Articletitled, Ultrasonic Nanocrystal Surface Modification Assisted Nitriding: An Experimental Study

PDF

Topics: Nanocrystals , Nitriding , Iron , Microhardness , Surface roughness , Atoms , Deformation , Nitrogen , Spectroscopy , Temperature

Increasing the Fracture Strength and Strain of Bulk Metallic Glasses by Ultrasonic Nano-Crystal Surface Modification

Chi Ma, Yalin Dong, Chang Ye

MSEC 2016; V002T01A007https://doi.org/10.1115/MSEC2016-8703

Abstract

View Articletitled, Increasing the Fracture Strength and Strain of Bulk Metallic Glasses by Ultrasonic Nano-Crystal Surface Modification

PDF

Topics: Fracture toughness , Metallic glasses , Nanocrystals , Fracture (Materials) , Crack propagation , Deformation , Nucleation (Physics) , Shear (Mechanics) , Stress

Effect of Nanocrystallization-Assisted Nitriding on the Corrosion Behavior of AISI 4140 Steel

Zhencheng Ren, Xiaoning Hou, Yalin Dong, Chang Ye

MSEC 2016; V002T01A008https://doi.org/10.1115/MSEC2016-8705

Abstract

View Articletitled, Effect of Nanocrystallization-Assisted Nitriding on the Corrosion Behavior of AISI 4140 Steel

PDF

Topics: Corrosion , Nitriding , Steel , Corrosion resistance , Diffusion (Physics) , Grain boundaries , Low temperature , Microchannels , Nanocrystals , Nanoscale phenomena

Mechanical Properties of Magnesium AZ31B Alloy After Ultrasonic Nanocrystal Surface Modification

Xiaoning Hou, Ruixia Zhang, Zhencheng Ren, Chang Ye, Yalin Dong, Haifeng Qin, Gary Doll, Xianfeng Zhou, Steven Mankoci, Nita Sahai

MSEC 2016; V002T01A009https://doi.org/10.1115/MSEC2016-8737

Abstract

View Articletitled, Mechanical Properties of Magnesium AZ31B Alloy After Ultrasonic Nanocrystal Surface Modification

PDF

Topics: Alloys , Magnesium (Metal) , Mechanical properties , Nanocrystals , Magnesium alloys , Weight (Mass) , Corrosion , Deformation , Surface deformation , Surface finishing

Segmented Cutting Coefficient Based Chatter Modeling for High-Speed Micromilling of Ti6Al4V

Kundan K. Singh, V. Kartik, Ramesh Singh

MSEC 2016; V002T01A010https://doi.org/10.1115/MSEC2016-8778

Abstract

View Articletitled, Segmented Cutting Coefficient Based Chatter Modeling for High-Speed Micromilling of Ti6Al4V

PDF

Topics: Chatter , Cutting , Micromilling , Modeling , Stability , Stress , Failure , Stiffness , Degrees of freedom , Displacement

Modeling Evolution of Microstructures Beneath Topographically Textured Surfaces Produced Using Shear Based Material Removal

Saurabh Basu, Zhiyu Wang, Christopher Saldana

MSEC 2016; V002T01A011https://doi.org/10.1115/MSEC2016-8802

Abstract

View Articletitled, Modeling Evolution of Microstructures Beneath Topographically Textured Surfaces Produced Using Shear Based Material Removal

PDF

Topics: Biomedicine , Chatter , Copper , Diffraction , Electrical conductivity , Electrons , Imaging , Machining , Microscopy , Modeling

The Effect of Heat-Treatment on Mechanical, Microstructural, and Corrosion Characteristics of a Magnesium Alloy With Potential Application in Resorbable Bone Fixation Hardware

Hamdy Ibrahim, Andrew D. Klarner, Behrang Poorganji, David Dean, Alan A. Luo, Mohammad Elahinia

MSEC 2016; V002T01A012https://doi.org/10.1115/MSEC2016-8822

Abstract

View Articletitled, The Effect of Heat-Treatment on Mechanical, Microstructural, and Corrosion Characteristics of a Magnesium Alloy With Potential Application in Resorbable Bone Fixation Hardware

PDF

Topics: Bone , Corrosion , Hardware , Heat treating (Metalworking) , Magnesium alloys , Alloys , Heat , Biocompatibility , Compression , Stiffness

Advances in Manufacturing of Engineered Material Systems

Automated Assembly of Electronic Digital Materials

Will Langford, Amanda Ghassaei, Neil Gershenfeld

MSEC 2016; V002T01A013https://doi.org/10.1115/MSEC2016-8627

Abstract

View Articletitled, Automated Assembly of Electronic Digital Materials

PDF

Topics: Manufacturing , Design , Additive manufacturing , Blocks (Building materials) , Workflow , Bulk solids , Computer-aided design , Errors , Printing

Fabricating Microchannels in Elastomer Substrates for Stretchable Electronics

Michelle C. Yuen, Rebecca K. Kramer

MSEC 2016; V002T01A014https://doi.org/10.1115/MSEC2016-8654

Abstract

View Articletitled, Fabricating Microchannels in Elastomer Substrates for Stretchable Electronics

PDF

Topics: Elastomers , Electronics , Microchannels , Manufacturing , Flexible electronics , Fluids , Sensors , Additive manufacturing , Electrical resistance , Laser ablation

Materials Testing of 3D Printed ABS and PLA Samples to Guide Mechanical Design

Daniel Farbman, Chris McCoy

MSEC 2016; V002T01A015https://doi.org/10.1115/MSEC2016-8668

Abstract

View Articletitled, Materials Testing of 3D Printed ABS and PLA Samples to Guide Mechanical Design

PDF

Topics: Additive manufacturing , ASTM standards , Bone , Deformation , Design , Design engineering , Finite element analysis , Geometry , Materials testing , Plastics

Optimizing Origami-Based Sheet Metal Parts Using Traversal Algorithms and Manufacturing Based Indices

Ala Qattawi

MSEC 2016; V002T01A016https://doi.org/10.1115/MSEC2016-8754

Abstract

View Articletitled, Optimizing Origami-Based Sheet Metal Parts Using Traversal Algorithms and Manufacturing Based Indices

PDF

Topics: Algorithms , Manufacturing , Sheet metal , Metal stamping , Optimization , Accounting , Design , Geometry , Laser cutting , Performance

Spontaneous Fabrication of Three Dimensional Multi-Scale Fractal Structures Using Hele Shaw Cell

Tanveer ul Islam, Prasanna S. Gandhi

MSEC 2016; V002T01A017https://doi.org/10.1115/MSEC2016-8755

Abstract

View Articletitled, Spontaneous Fabrication of Three Dimensional Multi-Scale Fractal Structures Using Hele Shaw Cell

PDF

Topics: Fractals , Manufacturing , Fluids , Solidification , Blood flow , Ceramics , Microscale devices , Optimization , Photopolymers , Plates (structures)

Meso-Scale Digital Materials: Modular, Reconfigurable, Lattice-Based Structures

Benjamin Jenett, Daniel Cellucci, Christine Gregg, Kenneth Cheung

MSEC 2016; V002T01A018https://doi.org/10.1115/MSEC2016-8767

Abstract

View Articletitled, Meso-Scale Digital Materials: Modular, Reconfigurable, Lattice-Based Structures

PDF

Topics: Blocks (Building materials) , Boats , Bridges (Structures) , Computer simulation , Design , Manufacturing , Modular construction , Stiffness

Relative Robots: Scaling Automated Assembly of Discrete Cellular Lattices

Matthew Carney, Benjamin Jenett

MSEC 2016; V002T01A019https://doi.org/10.1115/MSEC2016-8837

Abstract

View Articletitled, Relative Robots: Scaling Automated Assembly of Discrete Cellular Lattices

PDF

Topics: Manufacturing , Robots , Robotics , Errors , Stiffness , Construction , Design , Machine design , Robotic assembly , Topology

Evaluation of Cellular Solids Derived From Triply Periodic Minimal Surfaces

Daniel Cellucci, Kenneth C. Cheung

MSEC 2016; V002T01A020https://doi.org/10.1115/MSEC2016-8849

Abstract

View Articletitled, Evaluation of Cellular Solids Derived From Triply Periodic Minimal Surfaces

PDF

Topics: Solids , Honeycomb structures , Density , Design , Engineering systems and industry applications , Geometry , Trusses (Building)

Biomanufacturing

Advances in Additive Biomanufacturing of Tissues and Multiscale Engineered Tissue Constructs

A Comparison Between Porous NiTi and Ti-6Al-4V Fixation Hardware on Bone Remodeling After a Reconstruction Surgery

Bahram Raad, Narges Shayesteh Moghaddam, Mohammad Elahinia

MSEC 2016; V002T03A001https://doi.org/10.1115/MSEC2016-8556

Abstract

View Articletitled, A Comparison Between Porous NiTi and Ti-6Al-4V Fixation Hardware on Bone Remodeling After a Reconstruction Surgery

PDF

Topics: Bone , Hardware , Nickel titanium alloys , Surgery , Alloys , Density , Engineering simulation , Finite element model , Geometry , Materials properties

Ligament Flows of Exit-Pinching During Drop-on-Demand Inkjetting of Alginate Solution

Mengyun Zhang, Changxue Xu

MSEC 2016; V002T03A002https://doi.org/10.1115/MSEC2016-8582

Abstract

View Articletitled, Ligament Flows of Exit-Pinching During Drop-on-Demand Inkjetting of Alginate Solution

PDF

Topics: Flow (Dynamics) , Drops , Fluids , Nozzles , Bioprinting , Pinch effect , Printing , Biological tissues , Excitation , Manufacturing

Design of a Skin Grafting Methodology for Burn Wound Using an Additive Biomanufacturing System Guided by Hyperspectral Imaging

Houzhu Ding, Antonio Dole, Filippos Tourlomousis, Robert C. Chang

MSEC 2016; V002T03A003https://doi.org/10.1115/MSEC2016-8588

Abstract

View Articletitled, Design of a Skin Grafting Methodology for Burn Wound Using an Additive Biomanufacturing System Guided by Hyperspectral Imaging

PDF

Topics: Biomanufacturing , Design , Imaging , Skin , Biological tissues , Oxygen , Biomedicine , Dimensions , Fibers , Geometry

Compressive Evaluation of Polyethylene (Glycol) Diacrylate (PEGDA) for Scaffold Fabrication

Ozlem Yasar, Serkan Inceoglu

MSEC 2016; V002T03A004https://doi.org/10.1115/MSEC2016-8619

Abstract

View Articletitled, Compressive Evaluation of Polyethylene (Glycol) Diacrylate (PEGDA) for Scaffold Fabrication

PDF

Topics: Manufacturing , Biological tissues , Mechanical properties , Ultraviolet radiation , Water , Blocks (Building materials) , Compression , Photolithography , Polymers , Shapes

Towards Resolution Enhancement and Process Repeatability With a Melt Electrospinning Writing Process: Design and Protocol Considerations

Filippos Tourlomousis, Houzhu Ding, Antonio Dole, Robert C. Chang

MSEC 2016; V002T03A005https://doi.org/10.1115/MSEC2016-8774

Abstract

View Articletitled, Towards Resolution Enhancement and Process Repeatability With a Melt Electrospinning Writing Process: Design and Protocol Considerations

PDF

Topics: Electrospinning , Process design , Resolution (Optics) , Fibers , Manufacturing , Printing , Additive manufacturing , Cultured cells , Design , Extruding

Modeling Human Mesenchymal Stem Cell Expansion in Vertical Wheel Bioreactors Using Lactate Production Rate in Regenerative Medicine Biomanufacturing

Arun Kumar, Binil Starly

MSEC 2016; V002T03A006https://doi.org/10.1115/MSEC2016-8787

Abstract

View Articletitled, Modeling Human Mesenchymal Stem Cell Expansion in Vertical Wheel Bioreactors Using Lactate Production Rate in Regenerative Medicine Biomanufacturing

PDF

Topics: Biomanufacturing , Biomedicine , Bioreactors , Modeling , Stem cells , Wheels , Patient treatment , Hydrodynamics , Hydrogels , Manufacturing

Advances in Analysis, Design, and Manufacturing of Biomedical Devices

Platform-Dependent Liquid Handling in High-Throughput Biodosimetry Tool

Dakai Bian, Jason C. Tsui, Mikhail Repin, Guy Garty, Helen Turner, Y. Lawrence Yao, David J. Brenner

MSEC 2016; V002T03A007https://doi.org/10.1115/MSEC2016-8513

Abstract

View Articletitled, Platform-Dependent Liquid Handling in High-Throughput Biodosimetry Tool

PDF

Topics: Assaying , Computer simulation , Filters , Fluids , Nozzles , Nuclear weapons , Patient treatment , Plates (structures) , Surface tension

Needle Cutting of Skin Simulants

Andrew C. Barnett, Lei Tan, Jessica Barrett, Jason Z. Moore

MSEC 2016; V002T03A008https://doi.org/10.1115/MSEC2016-8690

Abstract

View Articletitled, Needle Cutting of Skin Simulants

PDF

Topics: Cutting , Needles , Skin , Biological tissues , Friction , Urethane elastomers , Biomedicine , Fracture (Materials) , Fracture toughness , Medical devices

The Effect of Magnetic Abrasive Finishing on the Needle Inner Friction Force and Biopsy Length

Weisi Li, Wei-Chen Lin, Valens Nteziyaremye, Hitomi Yamaguchi, Dongming Guo, Albert Shih

MSEC 2016; V002T03A009https://doi.org/10.1115/MSEC2016-8696

Abstract

View Articletitled, The Effect of Magnetic Abrasive Finishing on the Needle Inner Friction Force and Biopsy Length

PDF

Topics: Finishing , Friction , Needles , Biological tissues , Polishing , Phantoms

An Experimental Study on the Effect of Compression Force Uniformity in Electrosurgical Tissue Welding

Xiaoran Li, Russell Borduin, Roland Chen, Wei Li

MSEC 2016; V002T03A010https://doi.org/10.1115/MSEC2016-8731

Abstract

View Articletitled, An Experimental Study on the Effect of Compression Force Uniformity in Electrosurgical Tissue Welding

PDF

Topics: Biological tissues , Compression , Welding , Blood , Damage , Electricity (Physics) , Fatigue , Surgery , Surgical tools

Intricate Geometric Design and Manufacturing on Vibration-Assisted Needles for Medical Applications

Yi Cai, Jason Moore, Yuan-Shin Lee

MSEC 2016; V002T03A011https://doi.org/10.1115/MSEC2016-8743

Abstract

View Articletitled, Intricate Geometric Design and Manufacturing on Vibration-Assisted Needles for Medical Applications

PDF

Topics: Biomedicine , Design , Manufacturing , Needles , Vibration , Surgery , Biological tissues , Cutting , Electrical discharge machining , Engineering prototypes

Characterization of Forces in High-Speed Bone Cutting and Grinding for Haptics Rendering

Avinash Danda, Yi Tang Kao, Mathew A. Kuttolamadom, Bruce L. Tai

MSEC 2016; V002T03A012https://doi.org/10.1115/MSEC2016-8794

Abstract

View Articletitled, Characterization of Forces in High-Speed Bone Cutting and Grinding for Haptics Rendering

PDF

Topics: Bone , Cutting , Grinding , Haptics , Rendering , Force feedback , Engineering simulation , Simulation , Surgery

Modeling of Brittle and Ductile Materials Drilling Using Smoothed-Particle Hydrodynamics

Mahsa Tajdari, Bruce L. Tai

MSEC 2016; V002T03A013https://doi.org/10.1115/MSEC2016-8801

Abstract

View Articletitled, Modeling of Brittle and Ductile Materials Drilling Using Smoothed-Particle Hydrodynamics

PDF

Topics: Brittleness , Drilling , Hydrodynamics , Modeling , Particulate matter , Finite element methods , Cutting , Cutting tools , Errors , Flow (Dynamics)

Manufacturing of Anatomically Accurate Cerebral Arteries for the Brain Aneurysm Surgical Simulator

Alexander Price, Luis Savastano, Wei-Chen Lin, Barry Belmont, Albert Shih

MSEC 2016; V002T03A014https://doi.org/10.1115/MSEC2016-8806

Abstract

View Articletitled, Manufacturing of Anatomically Accurate Cerebral Arteries for the Brain Aneurysm Surgical Simulator

PDF

Topics: Aneurysms , Brain , Cerebral arteries , Manufacturing , Surgery , Silicones , Vessels , Metals , Shapes , Computerized tomography

On the Effect of Screw Preload on the Stress Distribution of Mandibles During Segmental Defect Treatment Using an Additively Manufactured Hardware

Amirhesam Amerinatanzi, Narges Shayesteh Moghaddam, Ahmadreza Jahadakbar, David Dean, Mohammad Elahinia

MSEC 2016; V002T03A015https://doi.org/10.1115/MSEC2016-8840

Abstract

View Articletitled, On the Effect of Screw Preload on the Stress Distribution of Mandibles During Segmental Defect Treatment Using an Additively Manufactured Hardware

PDF

Topics: Additive manufacturing , Hardware , Screws , Stress concentration , Bone , Stress , Nickel titanium alloys , Stiffness , Finite element analysis , Shapes

Properties, Applications and Systems

Advances in Cyber Physical Systems, Stochastic Modeling and Sensor Networks in Advanced Manufacturing

Automated Learning of Operation Parameters for Robotic Cleaning by Mechanical Scrubbing

Ariyan M. Kabir, Joshua D. Langsfeld, Cunbo Zhuang, Krishnanand N. Kaipa, Satyandra K. Gupta

MSEC 2016; V002T04A001https://doi.org/10.1115/MSEC2016-8660

Abstract

View Articletitled, Automated Learning of Operation Parameters for Robotic Cleaning by Mechanical Scrubbing

PDF

Topics: Grinding , Oscillations , Particulate matter , Polishing , Robotics , Robots , Stiffness

Resolving Occlusions Through Simple Extraction Motions in Robotic Bin-Picking

Krishnanand N. Kaipa, Shaurya Shriyam, Nithyananda B. Kumbla, Satyandra K. Gupta

MSEC 2016; V002T04A002https://doi.org/10.1115/MSEC2016-8661

Abstract

View Articletitled, Resolving Occlusions Through Simple Extraction Motions in Robotic Bin-Picking

PDF

Topics: Robotics , Collisions (Physics) , Failure , Robots

Online Learning of Part Deformation Models in Robotic Cleaning of Compliant Objects

Joshua D. Langsfeld, Ariyan M. Kabir, Krishnanand N. Kaipa, Satyandra K. Gupta

MSEC 2016; V002T04A003https://doi.org/10.1115/MSEC2016-8663

Abstract

View Articletitled, Online Learning of Part Deformation Models in Robotic Cleaning of Compliant Objects

PDF

Topics: Deformation , Robotics , Robots , Deflection , Grasping , Delays , Light water reactors

Advances in Data Infrastructures for Manufacturing Operations Planning and Control

Implementing the ISO 15746 Standard for Chemical Process Optimization

Guodong Shao, Peter Denno, Albert Jones, Yan Lu

MSEC 2016; V002T04A004https://doi.org/10.1115/MSEC2016-8635

Abstract

View Articletitled, Implementing the ISO 15746 Standard for Chemical Process Optimization

PDF

Topics: Chemical processes , Optimization , Process control , Computer software , Feedback , International Organization for Standardization , Manufacturing , Modeling , Simulation

Machine Condition Detection for Milling Operations Using Low Cost Ambient Sensors

Anantha Narayanan, Alec Kanyuck, Satyandra K. Gupta, Sudarsan Rachuri

MSEC 2016; V002T04A005https://doi.org/10.1115/MSEC2016-8666

Abstract

View Articletitled, Machine Condition Detection for Milling Operations Using Low Cost Ambient Sensors

PDF

Topics: Machinery , Milling , Sensors , Manufacturing , Computer software , Hardware , Data mining , Failure , Machining , Milling machines

Step Ring Based 3D Path Planning via GPU Simulation for Subtractive 3D Printing

Zhengkai Wu, Thomas M. Tucker, Chandra Nath, Thomas R. Kurfess, Richard W. Vuduc

MSEC 2016; V002T04A006https://doi.org/10.1115/MSEC2016-8751

Abstract

View Articletitled, Step Ring Based 3D Path Planning via GPU Simulation for Subtractive 3D Printing

PDF

Topics: Additive manufacturing , Graphics processing units , Path planning , Simulation , Computer-aided design , Machining , Optimization , Computer software , Visualization , Cloud computing

The Current State of Sensing, Health Management, and Control for Small-to-Medium-Sized Manufacturers

Moneer Helu, Brian Weiss

MSEC 2016; V002T04A007https://doi.org/10.1115/MSEC2016-8783

Abstract

View Articletitled, The Current State of Sensing, Health Management, and Control for Small-to-Medium-Sized Manufacturers

PDF

Topics: Condition monitoring , Maintenance , Manufacturing , National Institute of Standards and Technology

Cloud Manufacturing: An Industrial Perspective

Research on the Relationships of Customized Service Attributes in Cloud Manufacturing

Longfei Zhou, Lin Zhang, Yuyan Xu

MSEC 2016; V002T04A008https://doi.org/10.1115/MSEC2016-8530

Abstract

View Articletitled, Research on the Relationships of Customized Service Attributes in Cloud Manufacturing

PDF

Topics: Manufacturing , Dimensions

Speculations on the Market Evolution of Cloud Manufacturing

Yijing Wang, Tao Peng

MSEC 2016; V002T04A009https://doi.org/10.1115/MSEC2016-8538

Abstract

View Articletitled, Speculations on the Market Evolution of Cloud Manufacturing

PDF

Topics: Manufacturing , Economics , Equilibrium (Physics)

Manufacturing Supplier Selection in Cloud Manufacturing Context and its Implementation and Application Perspectives

Soheil Hassanzadeh, Kai Cheng

MSEC 2016; V002T04A010https://doi.org/10.1115/MSEC2016-8572

Abstract

View Articletitled, Manufacturing Supplier Selection in Cloud Manufacturing Context and its Implementation and Application Perspectives

PDF

Topics: Manufacturing , Competencies , Internet , Optimization , Product quality

Towards Business Process Catalog for Cloud-Enabled Service Oriented Architectures

Nenad Ivezic, Miroslav Ljubicic, Serm Kulvatunyou, Scott Nieman, Conrad Leiva, Zoran Marjanovic

MSEC 2016; V002T04A011https://doi.org/10.1115/MSEC2016-8581

Abstract

View Articletitled, Towards Business Process Catalog for Cloud-Enabled Service Oriented Architectures

PDF

Topics: Architecture , Manufacturing industry , Vehicles

A Cloud-Based Approach to Support the Mobile Phone Recycling Industry in China

Wenyan Zhao, Xi Vincent Wang, Jianxin Yang, Bo Li, Lihui Wang

MSEC 2016; V002T04A012https://doi.org/10.1115/MSEC2016-8620

Abstract

View Articletitled, A Cloud-Based Approach to Support the Mobile Phone Recycling Industry in China

PDF

Topics: China , Recycling industry , Recycling , Cycles

Knowledge-Based Production Planning Within the Reference Planning Process Supporting Manufacturing Change Management

Benjamin Gernhardt, Tobias Vogel, Mohammad Givehchi, Lihui Wang, Matthias Hemmje

MSEC 2016; V002T04A013https://doi.org/10.1115/MSEC2016-8658

Abstract

View Articletitled, Knowledge-Based Production Planning Within the Reference Planning Process Supporting Manufacturing Change Management

PDF

Topics: Change management , Manufacturing , Production planning , Machinery , Internet of things , Logistics , Computers , Innovation , Mass production , Optimization

3D Printing in Cloud Manufacturing: Model and Platform Design

Lei Ren, Shicheng Wang, Yijun Shen, Shikai Hong, Yudi Chen, Lin Zhang

MSEC 2016; V002T04A014https://doi.org/10.1115/MSEC2016-8669

Abstract

View Articletitled, 3D Printing in Cloud Manufacturing: Model and Platform Design

PDF

Topics: Additive manufacturing , Design , Manufacturing

A System Design for Computer-Aided Manufacturing Shared, Interactive Process Setup Sheets

R. Hedrick, R. J. Urbanic, Ashley Novak

MSEC 2016; V002T04A015https://doi.org/10.1115/MSEC2016-8723

Abstract

View Articletitled, A System Design for Computer-Aided Manufacturing Shared, Interactive Process Setup Sheets

PDF

Topics: Computer-aided manufacturing , Design , Cloud computing , Computer software , Manufacturing , Computer-aided design , Cycles , Materials handling , Production testing , Tooling

Industry 4.0 and Cloud Manufacturing: A Comparative Analysis

Yongkui Liu, Xun Xu

MSEC 2016; V002T04A016https://doi.org/10.1115/MSEC2016-8726

Abstract

View Articletitled, Industry 4.0 and Cloud Manufacturing: A Comparative Analysis

PDF

Topics: Manufacturing , Internet , Manufacturing industry , Bearings , Collaboration , Cyber-physical systems , Internet of things

Industrial Cloud Robotics Towards Sustainable Manufacturing

Jiayi Liu, Wenjun Xu, Jiaqiang Zhang, Zude Zhou, Duc Truong Pham

MSEC 2016; V002T04A017https://doi.org/10.1115/MSEC2016-8733

Abstract

View Articletitled, Industrial Cloud Robotics Towards Sustainable Manufacturing

PDF

Topics: Manufacturing , Robotics , Sustainability , Energy consumption , Optimization , Robots , Cloud computing , Emissions , Manufacturing industry , Pollution

Cloud Manufacturing: An Industry Survey

Tiegang Zang, Yongkui Liu, Xun Xu

MSEC 2016; V002T04A018https://doi.org/10.1115/MSEC2016-8752

Abstract

View Articletitled, Cloud Manufacturing: An Industry Survey

PDF

Topics: Manufacturing , China , Collaboration , E-commerce , Internet of things , Manufacturing industry

Feature-Based Adaptive Manufacturing Equipment Control for Cloud Environments

Göran Adamson, Lihui Wang, Magnus Holm, Philip Moore

MSEC 2016; V002T04A019https://doi.org/10.1115/MSEC2016-8771

Abstract

View Articletitled, Feature-Based Adaptive Manufacturing Equipment Control for Cloud Environments

PDF

Topics: Production equipment , Manufacturing , Information models , Ontologies

Engineering Analytics and Data Science for Advanced Manufacturing System Informatics and Sustainability

Modeling and Performance Identification for General Production System Using Sensor Data

Jing Zou, Qing Chang, Yong Lei, Jorge Arinez, Guoxian Xiao

MSEC 2016; V002T04A020https://doi.org/10.1115/MSEC2016-8506

Abstract

View Articletitled, Modeling and Performance Identification for General Production System Using Sensor Data

PDF

Topics: Manufacturing systems , Modeling , Sensors , Dynamics (Mechanics) , Polishing equipment , Real-time control , System efficiency

Experimental Analysis of Process Parameters in Composite Manufacturing

Xinyan Ou, Maen Alkhader, Qing Chang

MSEC 2016; V002T04A021https://doi.org/10.1115/MSEC2016-8518

Abstract

View Articletitled, Experimental Analysis of Process Parameters in Composite Manufacturing

PDF

Topics: Composite materials , Experimental analysis , Manufacturing , Machinery , Aerospace industry , Carbon fibers , Mechanical properties , Optimization , Probability , Process control

A Bending-Machining Hybrid Process for Angular Dimensional Accuracy Enhancement

Ye Li, Anand Sekar

MSEC 2016; V002T04A022https://doi.org/10.1115/MSEC2016-8617

Abstract

View Articletitled, A Bending-Machining Hybrid Process for Angular Dimensional Accuracy Enhancement

PDF

Topics: Machining , Computer-aided design , Deformation , Manufacturing , Blanks , Cutting , Deflection , Dimensions , Engineering prototypes , Sheet metal

Forecast Method of Customer Needs Volatility to Personalized Product

Liu Haijiang, Xu Kaixiang, Pan Zhenhua

MSEC 2016; V002T04A023https://doi.org/10.1115/MSEC2016-8685

Abstract

View Articletitled, Forecast Method of Customer Needs Volatility to Personalized Product

PDF

Topics: Volatility , Time series , Design

Assembly Hierarchy Generation for Assembly System Design for a Product Family

Zhengqian Jiang, Hui Wang

MSEC 2016; V002T04A024https://doi.org/10.1115/MSEC2016-8704

Abstract

View Articletitled, Assembly Hierarchy Generation for Assembly System Design for a Product Family

PDF

Topics: Design , Manufacturing , Algorithms , Flexible manufacturing systems , Flow (Dynamics) , Linkages , Product design , Redundancy (Engineering) , Stress

Surface Variation Modeling by Fusing Surface Measurement Data With Multiple Manufacturing Process Variables

Jie Ren, Hui Wang

MSEC 2016; V002T04A025https://doi.org/10.1115/MSEC2016-8717

Abstract

View Articletitled, Surface Variation Modeling by Fusing Surface Measurement Data With Multiple Manufacturing Process Variables

PDF

Topics: Manufacturing , Modeling , Shapes , Density , Interpolation , Resolution (Optics)

Roll-to-Roll Manufacturing System Modeling and Analysis by Stream of Variation Theory

Huanyi Shui, Xiaoning Jin, Jun Ni

MSEC 2016; V002T04A026https://doi.org/10.1115/MSEC2016-8722

Abstract

View Articletitled, Roll-to-Roll Manufacturing System Modeling and Analysis by Stream of Variation Theory

PDF

Topics: Manufacturing systems , Modeling , Product quality , Equilibrium (Physics) , Errors , Finishes , Hooke's law , Machining , Manufacturing , Metrology

Estimation of Real-Time Active Maintenance Opportunity Windows in Manufacturing Systems With Bernoulli Machines

Xi Gu, Xiaoning Jin, Weihong Guo

MSEC 2016; V002T04A027https://doi.org/10.1115/MSEC2016-8735

Abstract

View Articletitled, Estimation of Real-Time Active Maintenance Opportunity Windows in Manufacturing Systems With Bernoulli Machines

PDF

Topics: Machinery , Maintenance , Manufacturing systems , Dynamics (Mechanics) , Manufacturing

Profile Monitoring and Fault Diagnosis via Sensor Fusion for Ultrasonic Welding

Weihong Guo, Jionghua (Judy) Jin, S. Jack Hu

MSEC 2016; V002T04A028https://doi.org/10.1115/MSEC2016-8750

Abstract

View Articletitled, Profile Monitoring and Fault Diagnosis via Sensor Fusion for Ultrasonic Welding

PDF

Topics: Fault diagnosis , Sensors , Ultrasonic welding , Design , Manufacturing , Metals , Signals , Tensors , Welding

A Critical Change Point Detection Method in Threaded Steel Pipe Connection Processes Using Two Stage Sequential Piecewise Linear Approach

Juan Du, Xi Zhang

MSEC 2016; V002T04A029https://doi.org/10.1115/MSEC2016-8757

Abstract

View Articletitled, A Critical Change Point Detection Method in Threaded Steel Pipe Connection Processes Using Two Stage Sequential Piecewise Linear Approach

PDF

Topics: Pipes , Steel , Regression models , Signals , Torque , Leakage , Machinery , Measurement systems , Modeling , Noise (Sound)

Broaching Tool Degradation Characterization Based on Functional Descriptors

Wenmeng Tian, Lee J. Wells, Jaime A. Camelio

MSEC 2016; V002T04A030https://doi.org/10.1115/MSEC2016-8781

Abstract

View Articletitled, Broaching Tool Degradation Characterization Based on Functional Descriptors

PDF

Topics: Computation , Condition monitoring , Cutting , Filtration , Fittings , Image processing , Machine tools , Machinery , Machining , Manufacturing

High Performance Computing and Data Analytics in Manufacturing

A Graphical Approach for Freeform Surface Offsetting With GPU Acceleration for Subtractive 3D Printing

Mohammad M. Hossain, Richard W. Vuduc, Chandra Nath, Thomas R. Kurfess, Thomas M. Tucker

MSEC 2016; V002T04A031https://doi.org/10.1115/MSEC2016-8525

Abstract

View Articletitled, A Graphical Approach for Freeform Surface Offsetting With GPU Acceleration for Subtractive 3D Printing

PDF

Topics: Additive manufacturing , Graphics processing units , Computation , Algorithms , Machining , Computer numerical control machine tools , Computer-aided design , Computer-aided manufacturing , Engines , Filters

Fog-Enabled Architecture for Data-Driven Cyber-Manufacturing Systems

Dazhong Wu, Janis Terpenny, Li Zhang, Robert Gao, Thomas Kurfess

MSEC 2016; V002T04A032https://doi.org/10.1115/MSEC2016-8559

Abstract

View Articletitled, Fog-Enabled Architecture for Data-Driven Cyber-Manufacturing Systems

PDF

Topics: Manufacturing , Machinery , Internet of things , Maintenance , Cloud computing , Computer software , Cyber-physical systems , Data storage systems , Failure , Machine learning

Forecasting Obsolescence Risk Using Machine Learning

Connor Jennings, Dazhong Wu, Janis Terpenny

MSEC 2016; V002T04A033https://doi.org/10.1115/MSEC2016-8625

Abstract

View Articletitled, Forecasting Obsolescence Risk Using Machine Learning

PDF

Topics: Machine learning , Risk , Bills of materials , Design , Electronics , Innovation , Product design

Innovations in Equipment Design, Tooling, and Control/Automation to Enhance Manufacturing Processes

Smooth Cornering Strategy for High Speed CNC Machine Tools With Confined Contour Error

Shingo Tajima, Burak Sencer

MSEC 2016; V002T04A034https://doi.org/10.1115/MSEC2016-8529

Abstract

View Articletitled, Smooth Cornering Strategy for High Speed CNC Machine Tools With Confined Contour Error

PDF

Topics: Computer numerical control machine tools , Errors , Corners (Structural elements) , Algorithms , Geometry , Junctions , Computers , Interpolation , Kinematics , Machine tools

Development of Smart Tooling Concepts Applied to Ultra-Precision and High Speed Machining

Chao Wang, Kai Cheng, Richard Rakowski

MSEC 2016; V002T04A035https://doi.org/10.1115/MSEC2016-8573

Abstract

View Articletitled, Development of Smart Tooling Concepts Applied to Ultra-Precision and High Speed Machining

PDF

Topics: High speed machining , Tooling , Cutting tools , Cutting , Drilling , Feedback , Machining , Signals , Composite materials , Sensors

Design of a High Bandwidth Non-Resonant Tertiary Motion Generator for Elliptical Vibration Texturing

Keyu Chen, Ping Guo

MSEC 2016; V002T04A036https://doi.org/10.1115/MSEC2016-8643

Abstract

View Articletitled, Design of a High Bandwidth Non-Resonant Tertiary Motion Generator for Elliptical Vibration Texturing

PDF

Topics: Design , Generators , Resonance , Vibration , Actuators , Bending (Stress) , Displacement , Finite element analysis , Hinges , Optimization

Fast Generation of Planar Micro-Structured Surfaces by Elliptical Vibration Texturing

Yang Yang, Ping Guo

MSEC 2016; V002T04A037https://doi.org/10.1115/MSEC2016-8710

Abstract

View Articletitled, Fast Generation of Planar Micro-Structured Surfaces by Elliptical Vibration Texturing

PDF

Topics: Vibration , Machining , Simulation models , Aluminum , Brass (Metal) , Cutting , Cutting tools , Generators , Manufacturing , Shapes

Tool Posture and Polishing Force Control on Unknown 3-Dimensional Curved Surface

Yuta Oba, Yasuhiro Kakinuma

MSEC 2016; V002T04A038https://doi.org/10.1115/MSEC2016-8762

Abstract

View Articletitled, Tool Posture and Polishing Force Control on Unknown 3-Dimensional Curved Surface

PDF

Topics: Force control , Polishing , Maintenance , Machinery , Manufacturing , Painting , Polishing equipment , Sensors , Surface quality , Trajectories (Physics)

Pose-Dependent Dynamic Modeling and Analysis of Bi-Rotary Milling Head

Chao Du, Dun Lu, Jun Zhang, Huijie Zhang, Wanhua Zhao

MSEC 2016; V002T04A039https://doi.org/10.1115/MSEC2016-8862

Abstract

View Articletitled, Pose-Dependent Dynamic Modeling and Analysis of Bi-Rotary Milling Head

PDF

Topics: Dynamic modeling , Milling , Dynamics (Mechanics) , Machining , Cutting , Design , Dynamic models , Gravity (Force) , Machining centers , Optimization

Intelligent Maintenance Decision Making for Manufacturing Systems

Heuristic Feature Selection for Shaving Tool Wear Classification

Yong Wang, Adam J. Brzezinski, Xianli Qiao, Jun Ni

MSEC 2016; V002T04A040https://doi.org/10.1115/MSEC2016-8547

Abstract

View Articletitled, Heuristic Feature Selection for Shaving Tool Wear Classification

PDF

Topics: Feature selection , Wear , Accelerometers , Condition monitoring , Feature extraction , Machinery , Signals

Joint Maintenance and Energy Management in Manufacturing Systems: Prospect Discussion, Challenge Analysis, and a Case Study

Xufeng Yao, Zeyi Sun, Dong Wei, Lingyun Wang

MSEC 2016; V002T04A041https://doi.org/10.1115/MSEC2016-8615

Abstract

View Articletitled, Joint Maintenance and Energy Management in Manufacturing Systems: Prospect Discussion, Challenge Analysis, and a Case Study

PDF

Topics: Energy management , Maintenance , Manufacturing systems , Assembly lines , Climate change , Decision making , Machinery , Reliability

Vision-Based Inspection System for Dimensional Accuracy in Powder-Bed Additive Manufacturing

Masoumeh Aminzadeh, Thomas Kurfess

MSEC 2016; V002T04A042https://doi.org/10.1115/MSEC2016-8674

Abstract

View Articletitled, Vision-Based Inspection System for Dimensional Accuracy in Powder-Bed Additive Manufacturing

PDF

Topics: Additive manufacturing , Inspection , Errors , Algorithms , Accuracy and precision , Corrective actions , Damage , Failure , Image processing , Lasers

Process-Machine-Interactions (PMI) in Advanced Manufacturing

Prediction of Coupled Torsional-Axial Vibrations of Drilling Tool With Clamping Boundary Conditions

Xiaoliang Jin, Narahara Gopal Koya

MSEC 2016; V002T04A043https://doi.org/10.1115/MSEC2016-8665

Abstract

View Articletitled, Prediction of Coupled Torsional-Axial Vibrations of Drilling Tool With Clamping Boundary Conditions

PDF

Topics: Boundary-value problems , Drilling , Vibration , Dynamics (Mechanics) , Deformation , Hole quality , Machining , Simulation results , Warping

Mechanical Ruling of Diffraction Grating: Part I — Aluminum Film Preparation and Characterization

Qinghua Wang, Baoqing Zhang, Ninggang Shen, Hongtao Ding

MSEC 2016; V002T04A044https://doi.org/10.1115/MSEC2016-8713

Abstract

View Articletitled, Mechanical Ruling of Diffraction Grating: Part I — Aluminum Film Preparation and Characterization

PDF

Topics: Aluminum , Diffraction gratings , Mechanical properties , Computer simulation , Nanoindentation

Mechanical Ruling of Diffraction Grating: Part II — Experimental Investigation and Numerical Simulation

Qinghua Wang, Ninggang Shen, Baoqing Zhang, Hongtao Ding

MSEC 2016; V002T04A045https://doi.org/10.1115/MSEC2016-8715

Abstract

View Articletitled, Mechanical Ruling of Diffraction Grating: Part II — Experimental Investigation and Numerical Simulation

PDF

Topics: Computer simulation , Diffraction gratings , Finite element analysis , Geometry , Deformation , Finite element model , Mechanical properties , Nanoindentation , Plasticity , Size effect

Fabrication of Right Triangular Prism Retroreflectors Through Ultraprecise Single Point Inverted Cutting

Benjamin W. Hamilton, Sama Hussein, O. Remus Tutunea-Fatan, Evgueni V. Bordatchev

MSEC 2016; V002T04A046https://doi.org/10.1115/MSEC2016-8857

Abstract

View Articletitled, Fabrication of Right Triangular Prism Retroreflectors Through Ultraprecise Single Point Inverted Cutting

PDF

Topics: Cutting , Manufacturing , Corners (Structural elements) , Diamond turning , Engineering prototypes , Geometry , Machining , Optical elements , Prisms (Optics) , Simulation results

Primitive Study on Model-Based Process Identification by Utilizing Force Estimation Techniques

Norikazu Suzuki, Ryosuke Ikeda, Eiji Shamoto

MSEC 2016; V002T04A047https://doi.org/10.1115/MSEC2016-8872

Abstract

View Articletitled, Primitive Study on Model-Based Process Identification by Utilizing Force Estimation Techniques

PDF

Topics: Computer numerical control machine tools , Cutting , Machine tools , Mechanical structures , Structural dynamics , Transfer functions

Quality Assurance in Additive Manufacturing Systems: Integrated Sensing, Modeling and Control

Three Dimensional Point Cloud Measurement Based Dimensional Integrity Assessment for Additive Manufactured Parts Using Spectral Graph Theory

Prahalad K. Rao, Zhenyu Kong, Chad E. Duty, Rachel J. Smith

MSEC 2016; V002T04A048https://doi.org/10.1115/MSEC2016-8516

Abstract

View Articletitled, Three Dimensional Point Cloud Measurement Based Dimensional Integrity Assessment for Additive Manufactured Parts Using Spectral Graph Theory

PDF

Topics: Additive manufacturing , Geometry , Quality control

In Situ Sensor-Based Monitoring and Computational Fluid Dynamics (CFD) Modeling of Aerosol Jet Printing (AJP) Process

Roozbeh (Ross) Salary, Jack P. Lombardi, M. Samie Tootooni, Ryan Donovan, Prahalad K. Rao, Mark D. Poliks

MSEC 2016; V002T04A049https://doi.org/10.1115/MSEC2016-8535

Abstract

View Articletitled, <em>In Situ</em> Sensor-Based Monitoring and Computational Fluid Dynamics (CFD) Modeling of Aerosol Jet Printing (AJP) Process

PDF

Topics: Aerosols , Computational fluid dynamics , Modeling , Printing , Sensors , Image processing , Corrective actions , Density , Gas flow , Nozzles

A Reverse Compensation Framework for Shape Deformation in Additive Manufacturing

Kai Xu, Tsz-Ho Kwok, Yong Chen

MSEC 2016; V002T04A050https://doi.org/10.1115/MSEC2016-8815

Abstract

View Articletitled, A Reverse Compensation Framework for Shape Deformation in Additive Manufacturing

PDF

Topics: Additive manufacturing , Deformation , Shapes , Computer-aided design , Computation , Cooling , Errors , Mask image projection stereolithography , Shrinkage (Materials)

Sustainable Manufacturing

Advances in Data Observation Through System-of-Systems Integration Across the Product Lifecycle

Effects of Die Size on Pellet Quality for Cellulosic Ethanol Manufacturing

Qi Zhang, Lin Heng, Jiping Zhou, Zhichao Li

MSEC 2016; V002T05A001https://doi.org/10.1115/MSEC2016-8677

Abstract

View Articletitled, Effects of Die Size on Pellet Quality for Cellulosic Ethanol Manufacturing

PDF

Topics: Ethanol , Manufacturing , Biomass , Density , Durability , Equilibrium (Physics) , Transportation systems , Fuels , Storage , Sustainability

Promoting Model-Based Definition to Establish a Complete Product Definition

Shawn P. Ruemler, Kyle E. Zimmerman, Nathan W. Hartman, Thomas Hedberg, Jr., Allison Barnard Feeney

MSEC 2016; V002T05A002https://doi.org/10.1115/MSEC2016-8702

Abstract

View Articletitled, Promoting Model-Based Definition to Establish a Complete Product Definition

PDF

Topics: Engineering drawings , Information models , Manufacturing industry , Molecular beam epitaxy , Three-dimensional models , Workflow

Gaps Analysis of Integrating Product Design, Manufacturing, and Quality Data in the Supply Chain Using Model-Based Defintion

Asa Trainer, Thomas Hedberg, Jr., Allison Barnard Feeney, Kevin Fischer, Phil Rosche

MSEC 2016; V002T05A003https://doi.org/10.1115/MSEC2016-8792

Abstract

View Articletitled, Gaps Analysis of Integrating Product Design, Manufacturing, and Quality Data in the Supply Chain Using Model-Based Defintion

PDF

Topics: Manufacturing , Product design , Supply chains , Computer-aided design , Coordinate measuring machines , Molecular beam epitaxy , Design , Geometry , Shapes , Computer-aided manufacturing

Advances in Sustainable Manufacturing Processes and Systems

Sustainability of 3D Printing: A Critical Review and Recommendations

Zhichao Liu, Qiuhong Jiang, Yang Zhang, Tao Li, Hong-Chao Zhang

MSEC 2016; V002T05A004https://doi.org/10.1115/MSEC2016-8618

Abstract

View Articletitled, Sustainability of 3D Printing: A Critical Review and Recommendations

PDF

Topics: Additive manufacturing , Sustainability , Computer-aided design , Manufacturing , Green technology , Innovation , Life cycle assessment , Pareto optimization

Managing Complexity in Manufacturing Changeovers: A Sustainable Manufacturing-Oriented Approach and the Application Case Study

Khalid Mustafa, Kai Cheng

MSEC 2016; V002T05A005https://doi.org/10.1115/MSEC2016-8744

Abstract

View Articletitled, Managing Complexity in Manufacturing Changeovers: A Sustainable Manufacturing-Oriented Approach and the Application Case Study

PDF

Topics: Manufacturing , Sustainability , Drugs , Manufacturing industry , Manufacturing systems

Experimental Study on Environmentally-Friendly Micro End-Milling Process of Ti-6Al-4V Using Nanofluid Minimum Quantity Lubrication With Chilly Gas

Jung Sub Kim, Jin Woo Kim, Young Chang Kim, Sang Won Lee

MSEC 2016; V002T05A006https://doi.org/10.1115/MSEC2016-8748

Abstract

View Articletitled, Experimental Study on Environmentally-Friendly Micro End-Milling Process of Ti-6Al-4V Using Nanofluid Minimum Quantity Lubrication With Chilly Gas

PDF

Topics: Lubrication , Milling , Nanofluids , Carbon dioxide , Cooling , Friction , Particulate matter , Wear , Boron , Machine tools

All Years

Proceedings Papers

Materials

Advances in Experiments and Modeling of Micromechanics and Microstructure Evolution in Manufacturing Processes

Advances in Manufacturing of Engineered Material Systems

Biomanufacturing

Advances in Additive Biomanufacturing of Tissues and Multiscale Engineered Tissue Constructs

Advances in Analysis, Design, and Manufacturing of Biomedical Devices

Properties, Applications and Systems

Advances in Cyber Physical Systems, Stochastic Modeling and Sensor Networks in Advanced Manufacturing

Advances in Data Infrastructures for Manufacturing Operations Planning and Control

Cloud Manufacturing: An Industrial Perspective

Engineering Analytics and Data Science for Advanced Manufacturing System Informatics and Sustainability

High Performance Computing and Data Analytics in Manufacturing

Innovations in Equipment Design, Tooling, and Control/Automation to Enhance Manufacturing Processes

Intelligent Maintenance Decision Making for Manufacturing Systems

Process-Machine-Interactions (PMI) in Advanced Manufacturing

Quality Assurance in Additive Manufacturing Systems: Integrated Sensing, Modeling and Control

Sustainable Manufacturing

Advances in Data Observation Through System-of-Systems Integration Across the Product Lifecycle

Advances in Sustainable Manufacturing Processes and Systems

Email alerts

Most Read Proceedings Papers in MSEC

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only