Volumes | International Manufacturing Science and Engineering Conference | American Society of Mechanical Engineers Digital Collection

Topics: Lasers , Machining , Brittleness , Heating , Ceramics , Cutting , Diamond tools , Fracture (Materials) , Fracture (Process) , Fracture toughness

Graphene Oxide Colloidal Suspensions as Cutting Fluids for Micromachining: Part 1 — Fabrication and Performance Evaluation

Bryan Chu, Eklavya Singh, Johnson Samuel, Nikhil Koratkar

MSEC 2015; V001T02A008doi:https://doi.org/10.1115/MSEC2015-9372

Abstract

View Articletitled, Graphene Oxide Colloidal Suspensions as Cutting Fluids for Micromachining: Part 1 — Fabrication and Performance Evaluation

PDF

Topics: Cutting , Fluids , Graphene , Manufacturing , Micromachining , Performance evaluation , Cooling , Drops , Evaporation , Geometry

Graphene Oxide Colloidal Suspensions as Cutting Fluids for Micromachining: Part 2 — Droplet Dynamics and Film Formation

Bryan Chu, Johnson Samuel

MSEC 2015; V001T02A009doi:https://doi.org/10.1115/MSEC2015-9373

Abstract

View Articletitled, Graphene Oxide Colloidal Suspensions as Cutting Fluids for Micromachining: Part 2 — Droplet Dynamics and Film Formation

PDF

Topics: Cutting , Drops , Dynamics (Mechanics) , Fluids , Graphene , Micromachining , Evaporation , Machining , Fluctuations (Physics) , Imaging

Locally Applied Direct Electric Current’s Effect on Springback of 2024-T3 Aluminum After Single Point Incremental Forming

Brandt J. Ruszkiewicz, John T. Roth, David H. Johnson

MSEC 2015; V001T02A010doi:https://doi.org/10.1115/MSEC2015-9429

Abstract

View Articletitled, Locally Applied Direct Electric Current’s Effect on Springback of 2024-T3 Aluminum After Single Point Incremental Forming

PDF

Topics: Aluminum , Electric current , Residual stresses , Shapes , Computer numerical control machine tools , Finite element analysis , Geometry , Machinery , Sheet metal work , Stress

Effect of Thermal Assistance on the Joining of Al6063 During Flow Drill Screwdriving

Jamie D. Skovron, Durul Ulutan, Laine Mears, Duane Detwiler, Daniel Paolini, Boris Baeumler, Laurence Claus

MSEC 2015; V001T02A011doi:https://doi.org/10.1115/MSEC2015-9435

Abstract

View Articletitled, Effect of Thermal Assistance on the Joining of Al6063 During Flow Drill Screwdriving

PDF

Topics: Drills (Tools) , Flow (Dynamics) , Joining , Separation (Technology) , Temperature , Aluminum , Cycles , Torque , Corporate average fuel economy , Corrosion

Numerical Analysis of the Effect of Non Uniform Electric Field on the Trajectory of Micro Water Jet

Satyabrata Mohanty, Kornel F. Ehmann, Jian Cao

MSEC 2015; V001T02A012doi:https://doi.org/10.1115/MSEC2015-9445

Abstract

View Articletitled, Numerical Analysis of the Effect of Non Uniform Electric Field on the Trajectory of Micro Water Jet

PDF

Topics: Electric fields , Numerical analysis , Trajectories (Physics) , Water , Dielectrophoresis , Deflection , Manufacturing tools , Materials processing , Micromanufacturing

Electrically-Assisted Machining of Titanium Alloy Ti-6Al-4V and Nickel-Based Alloy IN-738: An Investigation

Durul Ulutan, Abram Pleta, Laine Mears

MSEC 2015; V001T02A013doi:https://doi.org/10.1115/MSEC2015-9465

Abstract

View Articletitled, Electrically-Assisted Machining of Titanium Alloy Ti-6Al-4V and Nickel-Based Alloy IN-738: An Investigation

PDF

Topics: Alloys , Machining , Nickel , Titanium alloys , Electric current , Mechanical properties , Currents , Ductility , Flow (Dynamics) , Lasers

Advances in Energy Beam Based Surface Modification

Simultaneous 9-Axis-Laser-Processing

John Flemmer, Edgar Willenborg

MSEC 2015; V001T02A014doi:https://doi.org/10.1115/MSEC2015-9242

Abstract

View Articletitled, Simultaneous 9-Axis-Laser-Processing

PDF

Topics: Lasers , Chain , Deflection , Laser beams , Computer software , Errors , Image segmentation , Kinematics , Synchronization

LMDCAM2: Software Tool for Near-Net Repair, Cladding and Built-Up by Laser Metal Deposition

John Flemmer, Norbert Pirch, Fabian Drinck

MSEC 2015; V001T02A015doi:https://doi.org/10.1115/MSEC2015-9243

Abstract

View Articletitled, LMDCAM2: Software Tool for Near-Net Repair, Cladding and Built-Up by Laser Metal Deposition

PDF

Topics: Cladding systems (Building) , Computer software , Lasers , Maintenance , Metals , Algorithms , Computer-aided design , Design , Geometry , Machining

Laser Induced Porosity and Crystallinity Modification of a Bioactive Glass Coating on Titanium Substrates

Panjawat Kongsuwan, Grant B. Brandal, Y. Lawrence Yao

MSEC 2015; V001T02A016doi:https://doi.org/10.1115/MSEC2015-9272

Abstract

View Articletitled, Laser Induced Porosity and Crystallinity Modification of a Bioactive Glass Coating on Titanium Substrates

PDF

Topics: Glass coatings , Lasers , Porosity , Titanium , Coating processes , Glass , Sintering , Adhesion , Bearings , Biomedicine

A Hybrid Surface Processing Method Using Surface Alloying and Pulsed Laser Micro Melting on S7 Tool Steel

Justin D. Morrow, Qinghua Wang, Neil A. Duffie, Frank E. Pfefferkorn

MSEC 2015; V001T02A017doi:https://doi.org/10.1115/MSEC2015-9446

Abstract

View Articletitled, A Hybrid Surface Processing Method Using Surface Alloying and Pulsed Laser Micro Melting on S7 Tool Steel

PDF

Topics: Lasers , Melting , Tool steel , Boron , Polishing , Chemistry , Coatings , Density , Indium alloys , Liquid metals

Advances in Modeling, Analysis, and Simulation of Manufacturing Processes

Prediction of Cutting Forces in High Speed Machining of Ti6Al4V Using SPH Method

Alaa A. Olleak, Hassan A. El-Hofy

MSEC 2015; V001T02A018doi:https://doi.org/10.1115/MSEC2015-9201

Abstract

View Articletitled, Prediction of Cutting Forces in High Speed Machining of Ti6Al4V Using SPH Method

PDF

Topics: Cutting , High speed machining , Modeling , Alloys , Constitutive equations , Deformation , Finite element methods , Hydrodynamics , Machining , Particulate matter

A Line Heat Input Model for Additive Manufacturing

Jeff Irwin, P. Michaleris

MSEC 2015; V001T02A019doi:https://doi.org/10.1115/MSEC2015-9240

Abstract

View Articletitled, A Line Heat Input Model for Additive Manufacturing

PDF

Topics: Additive manufacturing , Heat , Simulation , Displacement , Electron beams , Errors , Lasers , Modeling , Stability

Supply Power Design of Oil Cooling Strategies for Precision Ball Screw Unit

Teng Liu, Weiguo Gao, Guanwei Zhang, Dawei Zhang, Yifan Zhang

MSEC 2015; V001T02A020doi:https://doi.org/10.1115/MSEC2015-9246

Abstract

View Articletitled, Supply Power Design of Oil Cooling Strategies for Precision Ball Screw Unit

PDF

Topics: Cooling , Design , Screws , Coolants , Flow (Dynamics) , Modeling , Temperature , Finite element analysis , Fluids , Heat

Finite Element Study of the Cutting Mechanics of the Three Dimensional Rock Turning Process

Demeng Che, Jacob Smith, Kornel F. Ehmann

MSEC 2015; V001T02A021doi:https://doi.org/10.1115/MSEC2015-9249

Abstract

View Articletitled, Finite Element Study of the Cutting Mechanics of the Three Dimensional Rock Turning Process

PDF

Topics: Cutting , Finite element analysis , Rocks , Turning , Drilling , Finite element methods , Finite element model , Calibration , Damage , Diamonds

Fatigue Behaviour of Lead-Free Solder Interconnections in Life Prediction of Trilayer Structures Subjected to Thermal Cycling

Alireza Shirazi, Hua Lu, Ahmad Varvani-Farahani

MSEC 2015; V001T02A022doi:https://doi.org/10.1115/MSEC2015-9250

Abstract

View Articletitled, Fatigue Behaviour of Lead-Free Solder Interconnections in Life Prediction of Trilayer Structures Subjected to Thermal Cycling

PDF

Topics: Fatigue , Lead-free solders , Fatigue damage , Fatigue life , Solder joints , Alloys , Adhesives , Ball-Grid-Array packaging , Cycles , Damage

Surface Roughness Prediction Using Numerical Scheme and Feedback Control

Michael K. O. Ayomoh, Khaled A. Abou-El-Hossein, Sameh F. M. Ghobashi

MSEC 2015; V001T02A023doi:https://doi.org/10.1115/MSEC2015-9254

Abstract

View Articletitled, Surface Roughness Prediction Using Numerical Scheme and Feedback Control

PDF

Topics: Feedback , Surface roughness , Cutting , Simulation , Carbon steel , Computer software , Errors , Experimental design , Matlab , Modeling

Study of the Gaussian Distribution of Heat Flux for Micro-EDM

Fawang Zhang, Lin Gu, Wansheng Zhao

MSEC 2015; V001T02A024doi:https://doi.org/10.1115/MSEC2015-9276

Abstract

View Articletitled, Study of the Gaussian Distribution of Heat Flux for Micro-EDM

PDF

Topics: Electrical discharge machining , Gaussian distribution , Heat flux , Plasmas (Ionized gases) , Boundary-value problems , Cavities , Energy conservation , Errors , Finite element methods , Heat

Process Parameter Studies of Molecular Dynamics Models to Control Substrate Wettability

Jhonatam Cordeiro, Salil Desai

MSEC 2015; V001T02A025doi:https://doi.org/10.1115/MSEC2015-9282

Abstract

View Articletitled, Process Parameter Studies of Molecular Dynamics Models to Control Substrate Wettability

PDF

Topics: Molecular dynamics , Nanoscale phenomena , Biomedicine , Computer simulation , Drops , Electronics , Finite element analysis , Geometry , Machinery , Modeling

The Prediction of Fixture Comprehensive Influence on the Machining Error of Features Pattern

Gaiyun He, Longzhen Guo, Wenjie Tian, Xiangsong Zhao

MSEC 2015; V001T02A026doi:https://doi.org/10.1115/MSEC2015-9284

Abstract

View Articletitled, The Prediction of Fixture Comprehensive Influence on the Machining Error of Features Pattern

PDF

Topics: Errors , Machining , Composite materials , Evaluation methods , Inspection , Simulation experiments

Surface Topography Separation Based on Wavelet Reconstruction and Empirical Mode Decomposition

Faping Zhang, Jibin Yang, Tiguang Zhang, Yan Yan

MSEC 2015; V001T02A027doi:https://doi.org/10.1115/MSEC2015-9310

Abstract

View Articletitled, Surface Topography Separation Based on Wavelet Reconstruction and Empirical Mode Decomposition

PDF

Topics: Separation (Technology) , Wavelets , Impulse (Physics) , Noise (Sound) , Errors , Fourier transforms , Machining , Wavelet transforms

FE Simulation of Cryogenic Assisted Machining of Ti Alloy (Ti6AI4V)

Vivek Bajpai, Ineon Lee, Hyung Wook Park

MSEC 2015; V001T02A028doi:https://doi.org/10.1115/MSEC2015-9315

Abstract

View Articletitled, FE Simulation of Cryogenic Assisted Machining of Ti Alloy (Ti6AI4V)

PDF

Topics: Machining , Simulation , Titanium alloys , Cutting , Coolants , Machinability , Temperature , Wear , Aerospace industry , Alloys

Cutting Force and Friction Modelling in High Speed End-Milling

Sunday J. Ojolo, Olumuwiya Agunsoye, Oluwole Adesina, Gbeminiyi M. Sobamowo

MSEC 2015; V001T02A029doi:https://doi.org/10.1115/MSEC2015-9358

Abstract

View Articletitled, Cutting Force and Friction Modelling in High Speed End-Milling

PDF

Topics: Cutting , Friction , Milling , Modeling , Temperature , Machining , Metal cutting , Temperature distribution , Cutting tools , Wear

Optimal Blank Shape Prediction Considering Sheet Thickness Variation for Multistage Deep Drawing

Anupam Agrawal, N. Venkata Reddy, P. M. Dixit

MSEC 2015; V001T02A030doi:https://doi.org/10.1115/MSEC2015-9376

Abstract

View Articletitled, Optimal Blank Shape Prediction Considering Sheet Thickness Variation for Multistage Deep Drawing

PDF

Topics: Blanks , Shapes , Automobiles , Deformation , Dimensions , Sheet metal , Simulation , Stress

Effect of Variable Blank Holder Force on the Springback and Weld-Line Movement During Draw-Bending of Tailor Welded Blanks

Bishoy M. Dawood, Mostafa Shazly, Abdalla S. Wifi, Alaa El-Mokadem

MSEC 2015; V001T02A031doi:https://doi.org/10.1115/MSEC2015-9379

Abstract

View Articletitled, Effect of Variable Blank Holder Force on the Springback and Weld-Line Movement During Draw-Bending of Tailor Welded Blanks

PDF

Topics: Blanks , Finite element analysis , Finite element model

Heat Treatment Response of Steel Fatigue Sample During Vacuum Carburization and High Pressure Gas Quenching Process

Zhichao (Charlie) Li

MSEC 2015; V001T02A032doi:https://doi.org/10.1115/MSEC2015-9395

Abstract

View Articletitled, Heat Treatment Response of Steel Fatigue Sample During Vacuum Carburization and High Pressure Gas Quenching Process

PDF

Topics: Carburization , Fatigue , Heat treating (Metalworking) , High pressure (Physics) , Quenching (Metalworking) , Steel , Vacuum , Stress , Fatigue testing , Geometry

Role of Tool Flank Wear and Machining Speed in Developing of Residual Stress in Machined Surface During High Speed Machining of Titanium Alloys

Xueping Zhang, Rajiv Shivpuri, Anil K. Srivastava

MSEC 2015; V001T02A033doi:https://doi.org/10.1115/MSEC2015-9401

Abstract

View Articletitled, Role of Tool Flank Wear and Machining Speed in Developing of Residual Stress in Machined Surface During High Speed Machining of Titanium Alloys

PDF

Topics: High speed machining , Machining , Stress , Titanium alloys , Wear , Residual stresses , Alloys , Computer simulation , Cycles , Fatigue life

Investigation of Finite Element Thermal Models for Workpiece Temperature in Cylinder Boring

Lei Chen, Juhchin A. Yang, Albert J. Shih, Bruce L. Tai

MSEC 2015; V001T02A034doi:https://doi.org/10.1115/MSEC2015-9415

Abstract

View Articletitled, Investigation of Finite Element Thermal Models for Workpiece Temperature in Cylinder Boring

PDF

Topics: Cylinders , Finite element analysis , Temperature , Heat , Automotive engines , Cutting , Errors , High temperature , Temperature distribution , Tradeoffs

A Novel Method Based on Adjusted Sample Entropy for Process Capability Analysis in Complex Manufacturing Processes

Xianguang Kong, Shing I. Chang, Zheng Zhang

MSEC 2015; V001T02A035doi:https://doi.org/10.1115/MSEC2015-9417

Abstract

View Articletitled, A Novel Method Based on Adjusted Sample Entropy for Process Capability Analysis in Complex Manufacturing Processes

PDF

Topics: Entropy , Manufacturing , Manufacturing systems , Simulation

Comparison of the Effects of Down Milling and Up Milling on the Tool Temperature in Machining of Ti-6Al-4V

Jianfeng Ma, Changqing Qiu, Shuting Lei

MSEC 2015; V001T02A036doi:https://doi.org/10.1115/MSEC2015-9450

Abstract

View Articletitled, Comparison of the Effects of Down Milling and Up Milling on the Tool Temperature in Machining of Ti-6Al-4V

PDF

Topics: Machining , Milling , Temperature , Heat transfer , Temperature distribution , Chemical properties , Cooling , Corners (Structural elements) , Corrosion , Cutting

Prediction of Residual Stress in Multi-Step Orthogonal Cutting

Yamin Shao, Omar Fergani, Torgeir Welo, Steven Liang

MSEC 2015; V001T02A037doi:https://doi.org/10.1115/MSEC2015-9455

Abstract

View Articletitled, Prediction of Residual Stress in Multi-Step Orthogonal Cutting

PDF

Topics: Cutting , Stress , Residual stresses , Finite element methods , Machining , Algorithms , Fatigue , Finishing , Grinding , Hardening

Nanoindentation Models With Realistic AFM Tip Geometries

Rapeepan Promyoo, Hazim El-Mounayri, Kody Varahramyan

MSEC 2015; V001T02A038doi:https://doi.org/10.1115/MSEC2015-9460

Abstract

View Articletitled, Nanoindentation Models With Realistic AFM Tip Geometries

PDF

Topics: Atomic force microscopy , Nanoindentation , Crystals , Molecular dynamics simulation , Nanoscale phenomena , Simulation , Atoms , Deformation , Finite element analysis , Modeling

Strip Flatness Mechanism Analysis in Single-Stand Cold Mills

Feng Zhang, Arif S. Malik

MSEC 2015; V001T02A039doi:https://doi.org/10.1115/MSEC2015-9499

Abstract

View Articletitled, Strip Flatness Mechanism Analysis in Single-Stand Cold Mills

PDF

Topics: Strips , Stress , Deflection , Engineering simulation , Simulation , Cold rolling , Design , Gages , Manufacturing , Optimization

Advances in Nontraditional Manufacturing Processes

Rotary Ultrasonic Machining of CFRP: Design of Experiment With a Cutting Force Model

Fuda Ning, Weilong Cong

MSEC 2015; V001T02A040doi:https://doi.org/10.1115/MSEC2015-9227

Abstract

View Articletitled, Rotary Ultrasonic Machining of CFRP: Design of Experiment With a Cutting Force Model

PDF

Topics: Carbon reinforced plastics , Cutting , Design , Ultrasonic machining , Composite materials , Drilling , Machinability , Machining , Rotation , Temperature

The Large Pulsed Electron Beam (LPEB)-Assisted Hybrid Deburring Process of the Patterned Metal Masks

Jisoo Kim, Hyung Wook Park

MSEC 2015; V001T02A041doi:https://doi.org/10.1115/MSEC2015-9233

Abstract

View Articletitled, The Large Pulsed Electron Beam (LPEB)-Assisted Hybrid Deburring Process of the Patterned Metal Masks

PDF

Topics: Cathode ray oscilloscopes , Deburring , Electron beams , Metals , Fiber lasers , Irradiation (Radiation exposure) , Polarization (Electricity) , Polarization (Light) , Polarization (Waves) , Corrosion

Investigations Into the Removal of EDM Recast Layer With Magnetic Abrasive Machining

Sehijpal Singh Khangura, Lakhvir Singh Sran, Anil K. Srivastava, Harinder Singh

MSEC 2015; V001T02A042doi:https://doi.org/10.1115/MSEC2015-9259

Abstract

View Articletitled, Investigations Into the Removal of EDM Recast Layer With Magnetic Abrasive Machining

PDF

Topics: Abrasive machining , Electrical discharge machining , Abrasives , Diamonds , Finishes , Machining , Steel , Brittleness , Fatigue , Finishing

Electrochemical Corrosion Resistance of AISI H13 Steel Machined by Electro Discharge Machining

Xufan Yan, Song Zhang, Jianfeng Li, Gaoqi Wang

MSEC 2015; V001T02A043doi:https://doi.org/10.1115/MSEC2015-9261

Abstract

View Articletitled, Electrochemical Corrosion Resistance of AISI H13 Steel Machined by Electro Discharge Machining

PDF

Topics: Electrical discharge machining , Electrolytic corrosion , Steel , Corrosion resistance , Diamonds , Electrochemical impedance spectroscopy , Polishing , Machining , Metals , Polarization (Electricity)

Process Simulation of Electrochemical Machining of Convexity Structure on Revolving Workpiece

Zengwei Zhu, Dengyong Wang, Jun Bao, Di Zhu

MSEC 2015; V001T02A044doi:https://doi.org/10.1115/MSEC2015-9275

Abstract

View Articletitled, Process Simulation of Electrochemical Machining of Convexity Structure on Revolving Workpiece

PDF

Topics: Machining , Process simulation , Equilibrium (Physics) , Anodes , Electrodes , Engineering simulation , Finite element analysis , Rotation , Simulation , Simulation results

Some Investigations on Surface Texturing on Monel 400 Using Photochemical Machining

Sadaiah Mudigonda, Deepakkumar H. Patil

MSEC 2015; V001T02A045doi:https://doi.org/10.1115/MSEC2015-9294

Abstract

View Articletitled, Some Investigations on Surface Texturing on Monel 400 Using Photochemical Machining

PDF

Topics: Machining , Etching , Temperature , Finishes , Photolithography , Photoresists , Spin (Aerodynamics) , Spinning (Textile) , Surface texture , Water

Research on the Machining Performance of SiC/Al Composites Utilizing the BEAM Process

Jipeng Chen, Lin Gu, Hui Xu, Wansheng Zhao

MSEC 2015; V001T02A046doi:https://doi.org/10.1115/MSEC2015-9301

Abstract

View Articletitled, Research on the Machining Performance of SiC/Al Composites Utilizing the BEAM Process

PDF

Topics: Composite materials , Machining , Blasting , Erosion , Scanning electron microscopes , Surface properties , Surface quality , Wear

Analysis of Shaped Electrode Based on Size Effects in Electrical Discharge Machining (EDM)

Tianfeng Zhou, Lizheng Ma, Siqin Pang, Zhiqiang Liang, Xibin Wang

MSEC 2015; V001T02A047doi:https://doi.org/10.1115/MSEC2015-9311

Abstract

View Articletitled, Analysis of Shaped Electrode Based on Size Effects in Electrical Discharge Machining (EDM)

PDF

Topics: Electrical discharge machining , Electrodes , Design , Wear

Atomized Dielectric Spray-Based Electric Discharge Machining (Spray-EDM) for Sustainable Manufacturing

Arvind Pattabhiraman, Deepak Marla, Shiv G. Kapoor

MSEC 2015; V001T02A048doi:https://doi.org/10.1115/MSEC2015-9348

Abstract

View Articletitled, Atomized Dielectric Spray-Based Electric Discharge Machining (Spray-EDM) for Sustainable Manufacturing

PDF

Topics: Electrical discharge machining , Manufacturing , Sprays , Sustainability , Electrodes , Particulate matter , Wear , Drops , Thin films

Rotary Ultrasonic Machining of Carbon Fiber Reinforced Plastics: A Design of Experiment

P. K. S. C. Fernando, Z. J. Pei, Meng Zhang, Xiaoxu Song, Weilong Cong

MSEC 2015; V001T02A049doi:https://doi.org/10.1115/MSEC2015-9391

Abstract

View Articletitled, Rotary Ultrasonic Machining of Carbon Fiber Reinforced Plastics: A Design of Experiment

PDF

Topics: Carbon reinforced plastics , Design , Ultrasonic machining , Machining , Drilling , Cutting , Engineering systems and industry applications , Rotation , Surface roughness , Torque

On Modeling and Simulation of the Discharging Activity in Electrochemical Discharge Machining

Baoyang Jiang, Shuhuai Lan, Jun Ni

MSEC 2015; V001T02A050doi:https://doi.org/10.1115/MSEC2015-9456

Abstract

View Articletitled, On Modeling and Simulation of the Discharging Activity in Electrochemical Discharge Machining

PDF

Topics: Electrical discharge machining , Modeling , Simulation , Machining , Brittleness , Electrodes , Machinery , Numerical analysis , Optimization , Thermal properties

Corrosion Study on Liquid Marble Based Localized Electrochemical Deposition on Cold Rolled Steel

Shiv Shailendar, Murali M. Sundaram

MSEC 2015; V001T02A051doi:https://doi.org/10.1115/MSEC2015-9497

Abstract

View Articletitled, Corrosion Study on Liquid Marble Based Localized Electrochemical Deposition on Cold Rolled Steel

PDF

Topics: Corrosion , Steel , Maintenance , Metals , Dimensions , Drops , Electrolytes , Testing

Advances in Processing of Polymers and Polymer-Based Composites

The Effect of Nanoclay on the Rheological Properties of Polylactic Acid/Polyhydroxybutyrate-Valerate Blends

Haibin Zhao, Xiangfang Peng

MSEC 2015; V001T02A052doi:https://doi.org/10.1115/MSEC2015-9223

Abstract

View Articletitled, The Effect of Nanoclay on the Rheological Properties of Polylactic Acid/Polyhydroxybutyrate-Valerate Blends

PDF

Topics: Nanoclays , Rheology , Nanocomposites , Injection molding , Polymer chains , Relaxation (Physics) , Shear (Mechanics) , Storage , Viscosity

Tuning the Mechanical Properties of High-Density Polyethylene by ECAE Process

Catalin Fetecau, Felicia Stan, Laurentiu Sandu, Florin Susac

MSEC 2015; V001T02A053doi:https://doi.org/10.1115/MSEC2015-9236

Abstract

View Articletitled, Tuning the Mechanical Properties of High-Density Polyethylene by ECAE Process

PDF

Topics: Density , Mechanical properties , Compression , Deformation , Differential scanning calorimetry , Elastic moduli , Extruding , Rotation , Yield strength , Yield stress

Shape Memory Composite Hands for Space Applications

Fabrizio Quadrini, Giovanni Matteo Tedde, Loredana Santo

MSEC 2015; V001T02A054doi:https://doi.org/10.1115/MSEC2015-9289

Abstract

View Articletitled, Shape Memory Composite Hands for Space Applications

PDF

Topics: Composite materials , Shapes , Shape memory polymers , Aerospace industry , Carbon fibers , Fibers , Heating , Mechanical properties , Polymers , Shape memory properties

Manufacturing of a Shape Memory Polymer Actuator

Loredana Santo, Giovanni Matteo Tedde, Fabrizio Quadrini

MSEC 2015; V001T02A055doi:https://doi.org/10.1115/MSEC2015-9313

Abstract

View Articletitled, Manufacturing of a Shape Memory Polymer Actuator

PDF

Topics: Actuators , Manufacturing , Shape memory polymers , Shapes , Epoxy resins , Foams (Chemistry) , Heat , Heating , Pistons , Pressure

Mechanical Properties of Densified Untwisted Carbon Nanotube Yarn / Epoxy Composites

Risa Yoshizaki, Kim Tae Sung, Atsushi Hosoi, Hiroyuki Kawada

MSEC 2015; V001T02A056doi:https://doi.org/10.1115/MSEC2015-9342

Abstract

View Articletitled, Mechanical Properties of Densified Untwisted Carbon Nanotube Yarn / Epoxy Composites

PDF

Topics: Carbon nanotubes , Composite materials , Epoxy adhesives , Epoxy resins , Mechanical properties , Yarns , Polymers , Elastic moduli , Fibers , Manufacturing

Development and Characterization of Inconel-Based Mixtures for Metal Injection Molding Applications

Paul Tourneroche, Jean-Claude Gelin, Thierry Barrière, Mohamed Sahli

MSEC 2015; V001T02A057doi:https://doi.org/10.1115/MSEC2015-9359

Abstract

View Articletitled, Development and Characterization of Inconel-Based Mixtures for Metal Injection Molding Applications

PDF

Topics: Injection molding , Metals , Feedstock , Polymers , Alloys , Biodegradation , Dimensions , Nickel

Effect of Tool Wear on Hole Quality in Drilling of Carbon Fiber Reinforced Plastic-Titanium Stacks Using Tungsten Carbide and PCD Tools

Dave (Dae-Wook) Kim, Aaron Beal, Patrick Kwon

MSEC 2015; V001T02A058doi:https://doi.org/10.1115/MSEC2015-9364

Abstract

View Articletitled, Effect of Tool Wear on Hole Quality in Drilling of Carbon Fiber Reinforced Plastic-Titanium Stacks Using Tungsten Carbide and PCD Tools

PDF

Topics: Carbon fibers , Drilling , Hole quality , Titanium , Tungsten , Wear , Carbon reinforced plastics , Damage , Drills (Tools) , Fibers

Investigation on the Effect of Carbon Nanotubes Concentration on the Electrical and Rheological Properties of PP/MWCNTs Composites

Felicia Stan, Laurentiu Sandu, Catalin Fetecau

MSEC 2015; V001T02A059doi:https://doi.org/10.1115/MSEC2015-9411

Abstract

View Articletitled, Investigation on the Effect of Carbon Nanotubes Concentration on the Electrical and Rheological Properties of PP/MWCNTs Composites

PDF

Topics: Carbon nanotubes , Composite materials , Multi-walled carbon nanotubes , Rheology , Flow (Dynamics) , Electrical conductivity , Nanotubes , Dimensions , Injection molding , Percolation theory

Challenges and Innovations in Additive Manufacturing

The Impact of Argon Shielding Flow Rate on Laser Engineered Net Shaping (LENS) of Ti-6Al-4V

J. C. Heigel, P. Michaleris

MSEC 2015; V001T02A060doi:https://doi.org/10.1115/MSEC2015-9244

Abstract

View Articletitled, The Impact of Argon Shielding Flow Rate on Laser Engineered Net Shaping (LENS) of Ti-6Al-4V

PDF

Topics: Flow (Dynamics) , Lasers , Lenses (Optics) , Convection , Stress , Temperature , Cooling , Deflection , Finite element analysis , Gas flow

Characterization of Microstructure and Mechanical Property of Inconel 718 From Selective Laser Melting

Xibing Gong, Xiaoqing Wang, Vernon Cole, Zachary Jones, Kenneth Cooper, Kevin Chou

MSEC 2015; V001T02A061doi:https://doi.org/10.1115/MSEC2015-9317

Abstract

View Articletitled, Characterization of Microstructure and Mechanical Property of Inconel 718 From Selective Laser Melting

PDF

Topics: Lasers , Mechanical properties , Melting , Cooling , Electron backscatter diffraction , Texture (Materials) , Nanoindentation , Optical microscopy , Scanning electron microscopes , Young's modulus

A Sensitivity Analysis Study on the Material Properties and Process Parameters for Selective Laser Melting of Inconel 625

Luis E. Criales, Yiğit M. Arısoy, Tuğrul Özel

MSEC 2015; V001T02A062doi:https://doi.org/10.1115/MSEC2015-9321

Abstract

View Articletitled, A Sensitivity Analysis Study on the Material Properties and Process Parameters for Selective Laser Melting of Inconel 625

PDF

Topics: Lasers , Materials properties , Melting , Sensitivity analysis , Additive manufacturing , Geometry , Heat , Temperature profiles , Computer simulation , Density

Review on Powder-Bed Laser Additive Manufacturing of Inconel 718 Parts

Xiaoqing Wang, Xibing Gong, Kevin Chou

MSEC 2015; V001T02A063doi:https://doi.org/10.1115/MSEC2015-9322

Abstract

View Articletitled, Review on Powder-Bed Laser Additive Manufacturing of Inconel 718 Parts

PDF

Topics: Additive manufacturing , Lasers , Mechanical properties , Melting

Impact of Additive Manufacturing Adoption on Future of Supply Chains

Ardeshir Raihanian Mashhadi, Behzad Esmaeilian, Sara Behdad

MSEC 2015; V001T02A064doi:https://doi.org/10.1115/MSEC2015-9392

Abstract

View Articletitled, Impact of Additive Manufacturing Adoption on Future of Supply Chains

PDF

Topics: Additive manufacturing , Supply chains , Design , Manufacturing , Simulation , Logistics , Manufacturing industry , Pipelines , Product design , Separation (Technology)

Effects of Process Variables on Extrusion of Carbon Fiber Reinforced ABS Filament for Additive Manufacturing

Emmett Hull, Weston Grove, Meng Zhang, Xiaoxu Song, Z. J. Pei, Weilong Cong

MSEC 2015; V001T02A065doi:https://doi.org/10.1115/MSEC2015-9396

Abstract

View Articletitled, Effects of Process Variables on Extrusion of Carbon Fiber Reinforced ABS Filament for Additive Manufacturing

PDF

Topics: Additive manufacturing , Carbon fibers , Extruding , Computer-aided design , Manufacturing , Mechanical properties , Modeling , Nozzles , Temperature

Airflow Assisted Electrohydrodynamic Jet Printing: An Advanced Micro-Additive Manufacturing Technique

Lai Yu Leo Tse, Kira Barton

MSEC 2015; V001T02A066doi:https://doi.org/10.1115/MSEC2015-9403

Abstract

View Articletitled, Airflow Assisted Electrohydrodynamic Jet Printing: An Advanced Micro-Additive Manufacturing Technique

PDF

Topics: Air flow , Electrohydrodynamics , Manufacturing , Printing , Resolution (Optics) , Additive manufacturing , Biomedicine , Design , Dynamics (Mechanics) , Electric fields

Additive Manufacturing of CFRP Composites Using Fused Deposition Modeling: Effects of Carbon Fiber Content and Length

Fuda Ning, Weilong Cong, Junhua Wei, Shiren Wang, Meng Zhang

MSEC 2015; V001T02A067doi:https://doi.org/10.1115/MSEC2015-9436

Abstract

View Articletitled, Additive Manufacturing of CFRP Composites Using Fused Deposition Modeling: Effects of Carbon Fiber Content and Length

PDF

Topics: Additive manufacturing , Carbon fibers , Carbon reinforced plastics , Composite materials , Modeling , Plastics , Mechanical properties , Ductility , Fracture toughness , Manufacturing

Fundamental Requirements for Data Representations in Laser-Based Powder Bed Fusion

Shaw C. Feng, Paul W. Witherell, Gaurav Ameta, Duck Bong Kim

MSEC 2015; V001T02A068doi:https://doi.org/10.1115/MSEC2015-9439

Abstract

View Articletitled, Fundamental Requirements for Data Representations in Laser-Based Powder Bed Fusion

PDF

Topics: Lasers , Additive manufacturing , Design , Engineering disciplines , Flow (Dynamics) , Metrology , Modeling

Design for Manufacturability in Additive Manufacturing Using a Graph Based Approach

Rajit Ranjan, Rutuja Samant, Sam Anand

MSEC 2015; V001T02A069doi:https://doi.org/10.1115/MSEC2015-9448

Abstract

View Articletitled, Design for Manufacturability in Additive Manufacturing Using a Graph Based Approach

PDF

Topics: Additive manufacturing , Design for Manufacturing , Design , Errors , Geometry

4D Printing: Design and Fabrication of 3D Shell Structures With Curved Surfaces Using Controlled Self-Folding

Dongping Deng, Yong Chen

MSEC 2015; V001T02A070doi:https://doi.org/10.1115/MSEC2015-9459

Abstract

View Articletitled, 4D Printing: Design and Fabrication of 3D Shell Structures With Curved Surfaces Using Controlled Self-Folding

PDF

Topics: Design , Manufacturing , Printing , Shells , Shapes , Hinges , Active materials , Algorithms , Biomedicine , Deformation

Nano-CT Characterization of Structural Voids and Air Bubbles in Fused Deposition Modeling for Additive Manufacturing

Roland K. Chen, Terris T. Lo, Lei Chen, Albert J. Shih

MSEC 2015; V001T02A071doi:https://doi.org/10.1115/MSEC2015-9462

Abstract

View Articletitled, Nano-CT Characterization of Structural Voids and Air Bubbles in Fused Deposition Modeling for Additive Manufacturing

PDF

Topics: Additive manufacturing , Bubbles , Modeling , Fibers , Materials testing , Bonding , Computerized tomography , Experimental design , Geometry , Necking

Deformation Evaluation of Part Overhang Configurations in Electron Beam Additive Manufacturing

Bo Cheng, Kevin Chou

MSEC 2015; V001T02A072doi:https://doi.org/10.1115/MSEC2015-9477

Abstract

View Articletitled, Deformation Evaluation of Part Overhang Configurations in Electron Beam Additive Manufacturing

PDF

Topics: Additive manufacturing , Cathode ray oscilloscopes , Deformation , Electron beams , Porosity , Finite element analysis , Geometry , Thermomechanics , Warping , Weight (Mass)

Electrohydrodynamic Jet Printing of Silver Seeds: Micro Scale Patterning by Electroless Copper Deposition

Hantang Qin, Jingyan Dong, Yuan-Shin Lee

MSEC 2015; V001T02A073doi:https://doi.org/10.1115/MSEC2015-9487

Abstract

View Articletitled, Electrohydrodynamic Jet Printing of Silver Seeds: Micro Scale Patterning by Electroless Copper Deposition

PDF

Topics: Copper , Electrohydrodynamics , Printing , Silver , Electrical resistivity , Catalysts , Electrical conductivity , Glass , Metal fibers , Metalwork

Green Energy Manufacturing

Ultrasonic-Assisted Dilute Acid Pretreatment of Poplar Wood Biomass for Biofuel Manufacturing: A Preliminary Study

Xiaoxu Song, Meng Zhang, Z. J. Pei, Donghai Wang

MSEC 2015; V001T02A074doi:https://doi.org/10.1115/MSEC2015-9340

Abstract

View Articletitled, Ultrasonic-Assisted Dilute Acid Pretreatment of Poplar Wood Biomass for Biofuel Manufacturing: A Preliminary Study

PDF

Topics: Biofuel , Biomass , Manufacturing , Wood products , Ultrasound , Irradiation (Radiation exposure)

Design, Fabrication, Simulation and Testing of a Novel Ocean Wave Energy Converter

Changwei Liang, Junxiao Ai, Lei Zuo

MSEC 2015; V001T02A075doi:https://doi.org/10.1115/MSEC2015-9444

Abstract

View Articletitled, Design, Fabrication, Simulation and Testing of a Novel Ocean Wave Energy Converter

PDF

Topics: Design , Manufacturing , Simulation , Testing , Wave energy , Wave energy converters , Buoys , Engines , Motors , Engineering prototypes

The Development of Drawn Microchannel Flow Inserts for High Temperature Waste Heat Recuperators

Samuel T. Brannon, Brian K. Paul

MSEC 2015; V001T02A076doi:https://doi.org/10.1115/MSEC2015-9458

Abstract

View Articletitled, The Development of Drawn Microchannel Flow Inserts for High Temperature Waste Heat Recuperators

PDF

Topics: High temperature , Microchannel flow , Waste heat , Microchannels , Alloys , Nickel , Superalloys , Trusses (Building) , Deflection , Economics

Innovations in Equipment Design, Tooling, and Control/Automation to Enhance Manufacturing Processes

Development of Si₃N₄/(W,Ti)C/Co Graded Nano-Composite Ceramic Tool and its Performance in Turning GH2132 Alloy

X. H. Tian, J. Zhao, F. Gong, W. Z. Qin, Q. Z. Xu

MSEC 2015; V001T02A077doi:https://doi.org/10.1115/MSEC2015-9333

Abstract

View Articletitled, Development of Si<sub>3</sub>N<sub>4</sub>/(W,Ti)C/Co Graded Nano-Composite Ceramic Tool and its Performance in Turning GH2132 Alloy

PDF

Topics: Alloys , Ceramics , Nanocomposites , Turning , Cutting , Composite materials , Wear , Cutting tools , Failure mechanisms , Flamelet generated manifold

Wear Mechanism Analysis of Coated Carbide Tools in High-Speed Milling of Ti-6Al-4V Alloy via Cross-Section Characterization of Worn Cutting Edge

Anhai Li, Jun Zhao, Fenghua Lin

MSEC 2015; V001T02A078doi:https://doi.org/10.1115/MSEC2015-9335

Abstract

View Articletitled, Wear Mechanism Analysis of Coated Carbide Tools in High-Speed Milling of Ti-6Al-4V Alloy via Cross-Section Characterization of Worn Cutting Edge

PDF

Topics: Alloys , Carbide cutting tools , Cutting , Milling , Wear , Erosion , Adhesion , Coating processes , Coatings , Delamination

Experimental Investigations to Evaluate the Performance of Alternate Striped Coated Carbide Inserts in Turning of AISI 1040 Steel

L. V. R. S. V. Prasad Chilamkurti, Naga Lakshmi Pavani Puvvada, Ramji Koona, Venkata Ramana Swarna

MSEC 2015; V001T02A079doi:https://doi.org/10.1115/MSEC2015-9361

Abstract

View Articletitled, Experimental Investigations to Evaluate the Performance of Alternate Striped Coated Carbide Inserts in Turning of AISI 1040 Steel

PDF

Topics: Steel , Turning , Wear , Coatings , Cutting , Machining , Carbide cutting tools , Cutting tools , Flow (Dynamics) , High speed machining

Feasibility of End Mill Cooling Using the Venturi Effect With Compressed Air

Brandt J. Ruszkiewicz, Zachary C. Reese, John T. Roth

MSEC 2015; V001T02A080doi:https://doi.org/10.1115/MSEC2015-9430

Abstract

View Articletitled, Feasibility of End Mill Cooling Using the Venturi Effect With Compressed Air

PDF

Topics: Compressed air , Cooling , Venturi tubes , Cutting , Fluids , Failure , Wear , Finishes , Hazardous substances , Hazardous wastes

Innovations in Joining and Assembly Processes

Modelling of Heat Affected Zone Softening in Laser Welding of M1500

Hongze Wang, Yansong Zhang

MSEC 2015; V001T02A081doi:https://doi.org/10.1115/MSEC2015-9251

Abstract

View Articletitled, Modelling of Heat Affected Zone Softening in Laser Welding of M1500

PDF

Topics: Heat , Laser welding , Modeling , Steel , Carbon , Emissions , Finite element model , Temperature distribution , Diffusion (Physics) , Vehicles

Analysis of Weld Formation in Multilayer Ultrasonic Metal Welding Using High-Speed Images

S. Shawn Lee, Tae Hyung Kim, S. Jack Hu, Wayne W. Cai, Jeffrey A. Abell

MSEC 2015; V001T02A082doi:https://doi.org/10.1115/MSEC2015-9262

Abstract

View Articletitled, Analysis of Weld Formation in Multilayer Ultrasonic Metal Welding Using High-Speed Images

PDF

Topics: Metals , Welding , Ultrasonic welding , Joining , Batteries , Density , Design , Displacement , Geometry , Lithium-ion batteries

The Assembly Variation Modeling for the Rear Casing Wax Part Based on Polar Coordinate

Changhui Liu, Sun Jin, Xinmin Lai, Jie Luo, Bo He, Fei Li

MSEC 2015; V001T02A083doi:https://doi.org/10.1115/MSEC2015-9292

Abstract

View Articletitled, The Assembly Variation Modeling for the Rear Casing Wax Part Based on Polar Coordinate

PDF

Topics: Manufacturing , Modeling , Engines , Dimensions

Estimation of Weld Bead Geometry in Gas Metal Arc Welding of Aluminum Using Electrical Signals and Liquid Surface Model

Hao Du, S. Jack Hu, Pei-Chung Wang, Jingjing Li

MSEC 2015; V001T02A084doi:https://doi.org/10.1115/MSEC2015-9370

Abstract

View Articletitled, Estimation of Weld Bead Geometry in Gas Metal Arc Welding of Aluminum Using Electrical Signals and Liquid Surface Model

PDF

Topics: Aluminum , Gas metal arc welding , Geometry , Signals , Welding , Drops , Surface tension , Automotive industry , Boundary-value problems , Sprays

Robustness of 802.15 Wireless Interface for Real-Time Thermal Feedback Control of the Friction Stir Welding Process

Grant H. Kruger, Scott F. Miller, Albert J. Shih, Theo I. van Niekerk

MSEC 2015; V001T02A085doi:https://doi.org/10.1115/MSEC2015-9431

Abstract

View Articletitled, Robustness of 802.15 Wireless Interface for Real-Time Thermal Feedback Control of the Friction Stir Welding Process

PDF

Topics: Feedback , Friction , Robustness , Welding , Control systems , Signals , Design , Electromagnetic noise , Errors , Forging

Study of Plunge Stage for a Hybrid Friction Stir Welding Process Based on Electro-Plastic Effect

Xun Liu, Shuhuai Lan, Xianli Qiao, Jun Ni

MSEC 2015; V001T02A086doi:https://doi.org/10.1115/MSEC2015-9457

Abstract

View Articletitled, Study of Plunge Stage for a Hybrid Friction Stir Welding Process Based on Electro-Plastic Effect

PDF

Topics: Friction , Welding , Steel , Temperature , Aluminum alloys , Cross section (Physics) , Electric current , Electrodes , Heating , Joules

Innovations in Materials Forming Processes

Hot Gas Forming for Advanced Tubular Automobile Components: Opportunities and Challenges

Dirk Landgrebe, Frank Schieck

MSEC 2015; V001T02A087doi:https://doi.org/10.1115/MSEC2015-9204

Abstract

View Articletitled, Hot Gas Forming for Advanced Tubular Automobile Components: Opportunities and Challenges

PDF

Topics: Automobiles , Design , Manufacturing , Carbon dioxide , Emissions , Temperature , Chain , Aluminum , Automotive industry , Blanks

Tool Load Sensitivity Against Multidimensional Process Influences in Microblanking of Thin Metal Foils With Silicon Punches

Sven Hildering, Markus Michalski, Ulf Engel, Marion Merklein

MSEC 2015; V001T02A088doi:https://doi.org/10.1115/MSEC2015-9206

Abstract

View Articletitled, Tool Load Sensitivity Against Multidimensional Process Influences in Microblanking of Thin Metal Foils With Silicon Punches

PDF

Topics: Metal foil , Silicon , Stress , Tension , Cutting , Errors , Wear , Blanking (Metalworking) , Brittleness , Copper foil

Development of a Die Compensation Algorithm for Sheet Metal Stamping With Deformable Tools

Lorenzo Iorio, Matteo Strano, Michele Monno

MSEC 2015; V001T02A089doi:https://doi.org/10.1115/MSEC2015-9212

Abstract

View Articletitled, Development of a Die Compensation Algorithm for Sheet Metal Stamping With Deformable Tools

PDF

Topics: Algorithms , Metal stamping , Sheet metal , Geometry , Steel , Tooling , Aluminum , Design , Finite element methods , Finite element model

Advances in Plastic Anisotropy and Forming Limits in Sheet Metal Forming

Dorel Banabic

MSEC 2015; V001T02A090doi:https://doi.org/10.1115/MSEC2015-9213

Abstract

View Articletitled, Advances in Plastic Anisotropy and Forming Limits in Sheet Metal Forming

PDF

Topics: Anisotropy , Forming limit diagrams , Sheet metal work , Computer simulation , Modeling , Sheet metal

Galling and Die Build-Up in Forming Uncoated, Cold-Rolled Advanced High-Strength Steels (AHSS)

Hua-Chu Shih

MSEC 2015; V001T02A091doi:https://doi.org/10.1115/MSEC2015-9237

Abstract

View Articletitled, Galling and Die Build-Up in Forming Uncoated, Cold-Rolled Advanced High-Strength Steels (AHSS)

PDF

Topics: Galling , Steel , Steel sheet , Finishes , Wear , Friction , Metal stamping , Surface texture , Tension , Automotive industry

Effect of Incremental Depth and Part Shape on Failure Modes in Single Point Incremental Forming of Polymers

Mohammad Ali Davarpanah, Rajiv Malhotra

MSEC 2015; V001T02A092doi:https://doi.org/10.1115/MSEC2015-9263

Abstract

View Articletitled, Effect of Incremental Depth and Part Shape on Failure Modes in Single Point Incremental Forming of Polymers

PDF

Topics: Failure mechanisms , Polymers , Shapes , Failure , Metals , Tooling , Work hardening

Experimental Investigation on Elastic Spring Back in Deformation Machining Bending Mode

Arshpreet Singh, Anupam Agrawal

MSEC 2015; V001T02A093doi:https://doi.org/10.1115/MSEC2015-9283

Abstract

View Articletitled, Experimental Investigation on Elastic Spring Back in Deformation Machining Bending Mode

PDF

Topics: Deformation , Machining , Springs , Computer numerical control machine tools , Coordinate measuring machines , Manufacturing , Milling machines

Compensations for Tool Path to Enhance Accuracy During Double Sided Incremental Forming

Rakesh Lingam, Anirban Bhattacharya, Javed Asghar, N. Venkata Reddy

MSEC 2015; V001T02A094doi:https://doi.org/10.1115/MSEC2015-9404

Abstract

View Articletitled, Compensations for Tool Path to Enhance Accuracy During Double Sided Incremental Forming

PDF

Topics: Deflection , Deformation , Equilibrium (Physics) , Geometry , Manufacturing , Sheet metal work , Tooling

Basic Investigations in Incremental Profile Forming

Goran Grzancic, Christoph Becker, Nooman Ben Khalifa, A. Erman Tekkaya

MSEC 2015; V001T02A095doi:https://doi.org/10.1115/MSEC2015-9406

Abstract

View Articletitled, Basic Investigations in Incremental Profile Forming

PDF

Topics: Analytical methods , Design , Innovation , Manufacturing , Manufacturing technology , Stress

Effects of Tool Positions in Accumulated Double-Sided Incremental Forming on Part Geometry

Huaqing Ren, Newell Moser, Zixuan Zhang, Ebot Ndip-Agbor, Jacob Smith, Kornel F. Ehmann, Jian Cao

MSEC 2015; V001T02A096doi:https://doi.org/10.1115/MSEC2015-9408

Abstract

View Articletitled, Effects of Tool Positions in Accumulated Double-Sided Incremental Forming on Part Geometry

PDF

Topics: Geometry , Deformation , Shapes

Incrementally Formed Stiffeners Effect on the Reduction of Springback in 2024-T3 Aluminum After Single Point Incremental Forming

Brandt J. Ruszkiewicz, Sean S. Dodds, Zachary C. Reese, John T. Roth, Ihab Ragai

MSEC 2015; V001T02A097doi:https://doi.org/10.1115/MSEC2015-9437

Abstract

View Articletitled, Incrementally Formed Stiffeners Effect on the Reduction of Springback in 2024-T3 Aluminum After Single Point Incremental Forming

PDF

Topics: Aluminum , Metals , Computer software , Geometry , Machinery , Residual stresses , Sheet metal , Stress

Effect of Toolpath on the Springback of 2024-T3 Aluminum During Single Point Incremental Forming

Zachary C. Reese, Brandt J. Ruszkiewicz, Chetan P. Nikhare, John T. Roth

MSEC 2015; V001T02A098doi:https://doi.org/10.1115/MSEC2015-9438

Abstract

View Articletitled, Effect of Toolpath on the Springback of 2024-T3 Aluminum During Single Point Incremental Forming

PDF

Topics: Aluminum , Geometry , Residual stresses , Shapes , Sheet metal , Deformation , Computer numerical control machine tools , Corners (Structural elements) , Fixturing , Milling

Design of a Continuous-Bending-Under-Tension Machine and Initial Experiments on Al-6022-T4

Timothy J. Roemer, Brad L. Kinsey, Yannis P. Korkolis

MSEC 2015; V001T02A099doi:https://doi.org/10.1115/MSEC2015-9440

Abstract

View Articletitled, Design of a Continuous-Bending-Under-Tension Machine and Initial Experiments on Al-6022-T4

PDF

Topics: Design , Machinery , Tension , Rollers , Elongation , Gages , Deformation , Friction , Necking

Arbitrary Lagrangian Eulerian FEA Method to Predict Wavy Pattern and Weldability Window During Magnetic Pulsed Welding

Ali Nassiri, Greg P. Chini, Brad L. Kinsey

MSEC 2015; V001T02A100doi:https://doi.org/10.1115/MSEC2015-9442

Abstract

View Articletitled, Arbitrary Lagrangian Eulerian FEA Method to Predict Wavy Pattern and Weldability Window During Magnetic Pulsed Welding

PDF

Topics: Finite element analysis , Welding , Engineering simulation , Errors , Parameter estimation , Plates (structures) , Simulation

Direct Adhesion of Warm Roll-Bonded Al1100/Polyurethane/Al1100 Sandwich Composite

Saeed Mousa, Gap-Yong Kim

MSEC 2015; V001T02A101doi:https://doi.org/10.1115/MSEC2015-9467

Abstract

View Articletitled, Direct Adhesion of Warm Roll-Bonded Al1100/Polyurethane/Al1100 Sandwich Composite

PDF

Topics: Adhesion , Composite materials , Urethane elastomers , Bonding , Metals , Polymers , Surface roughness , Temperature , Adhesives , Aluminum

Importance of Feature Sequencing in Incremental Forming

Rakesh Lingam, C. L. Harikrishnan, I. V. M. Kishan, N. Venkata Reddy

MSEC 2015; V001T02A102doi:https://doi.org/10.1115/MSEC2015-9471

Abstract

View Articletitled, Importance of Feature Sequencing in Incremental Forming

PDF

Topics: Deformation , Geometry , Sheet metal , Stiffness

Novel Extrusion Punch Design for Improved Lubrication and Punch Ejection

James Lowrie, Gracious Ngaile

MSEC 2015; V001T02A103doi:https://doi.org/10.1115/MSEC2015-9496

Abstract

View Articletitled, Novel Extrusion Punch Design for Improved Lubrication and Punch Ejection

PDF

Topics: Design , Extruding , Lubrication , Damage , Galling , Stress , Tooling , Finishes , Microchannels

Laser, Process Innovations and Energy Field Manufacturing Methodology

Cryogenic Cutting of AZ31B-O Mg Alloy for Improved Surface Integrity: Part I — Process Principles and Material Modeling

Ninggang Shen, Hongtao Ding

MSEC 2015; V001T02A104doi:https://doi.org/10.1115/MSEC2015-9323

Abstract

View Articletitled, Cryogenic Cutting of AZ31B-O Mg Alloy for Improved Surface Integrity: Part I — Process Principles and Material Modeling

PDF

Topics: Cutting , Magnesium alloys , Modeling , Microhardness , Aerospace industry , Alloys , Biodegradation , Biomedicine , Corrosion resistance , Fatigue

Cryogenic Cutting of AZ31B-O Mg Alloy for Improved Surface Integrity: Part II — Physics-Based Process Modeling of Surface Microstructural Alteration

Ninggang Shen, Hongtao Ding, Jiaying Gao

MSEC 2015; V001T02A105doi:https://doi.org/10.1115/MSEC2015-9324

Abstract

View Articletitled, Cryogenic Cutting of AZ31B-O Mg Alloy for Improved Surface Integrity: Part II — Physics-Based Process Modeling of Surface Microstructural Alteration

PDF

Topics: Cutting , Magnesium alloys , Modeling , Physics , Simulation , Twinning , Alloys , Computer software , Cooling , Finite element analysis

Research on a Novel High-Speed Pulsating Turning Technology

Yuanfeng He, Wenwu Zhang

MSEC 2015; V001T02A106doi:https://doi.org/10.1115/MSEC2015-9336

Abstract

View Articletitled, Research on a Novel High-Speed Pulsating Turning Technology

PDF

Topics: Cutting , Energy consumption , Heat , Inertia (Mechanics) , Machinery , Machining , Shapes , Stability , Stress , Surface roughness

A Review of Bone Graft Substitutes Made From HA-Polymer Composite Scaffolds and Fabrication Potential With Laser-Based Additive Manufacturing Processes

Hera Wu, Shuting Lei

MSEC 2015; V001T02A107doi:https://doi.org/10.1115/MSEC2015-9366

Abstract

View Articletitled, A Review of Bone Graft Substitutes Made From HA-Polymer Composite Scaffolds and Fabrication Potential With Laser-Based Additive Manufacturing Processes

PDF

Topics: Additive manufacturing , Bone , Composite materials , Lasers , Manufacturing , Polymers , Biodegradation , Ceramics , Design

Wire-Fed Additive Manufacturing of Transparent Glass Parts

Junjie Luo, Luke Gilbert, Chuang Qu, Jacob Wilson, Douglas Bristow, Robert Landers, Edward Kinzel

MSEC 2015; V001T02A108doi:https://doi.org/10.1115/MSEC2015-9377

Abstract

View Articletitled, Wire-Fed Additive Manufacturing of Transparent Glass Parts

PDF

Topics: Additive manufacturing , Glass , Transparency , Wire , Lasers , Laser beams

Direct Electric Current Spot Treatment’s Effect on Springback of 90 Degree Bent 2024-T3 Aluminum

Brandt J. Ruszkiewicz, Christopher Scriva, Zachary C. Reese, Chetan P. Nikhare, John T. Roth, Ihab Ragai

MSEC 2015; V001T02A109doi:https://doi.org/10.1115/MSEC2015-9433

Abstract

View Articletitled, Direct Electric Current Spot Treatment’s Effect on Springback of 90 Degree Bent 2024-T3 Aluminum

PDF

Topics: Aluminum , Electric current , Current density , Machinery , Flow (Dynamics) , Forming limit diagrams , Fracture (Materials) , Fracture (Process) , Metal stamping , Metals

Monitoring, Sensing, and Control for Intelligent Machining and Inspection

Cutting Tool Condition Monitoring and Prediction Based on Dynamic Data Driven Approaches

Zhenhua Wu

MSEC 2015; V001T02A110doi:https://doi.org/10.1115/MSEC2015-9346

Abstract

View Articletitled, Cutting Tool Condition Monitoring and Prediction Based on Dynamic Data Driven Approaches

PDF

Topics: Condition monitoring , Cutting tools , Wear , Cutting , Errors , Signals , Acoustic emissions , Artificial neural networks , Filters , Machining

Evaluation of the Working Surface of the Grinding Wheel Using Speckle Image Analysis

Arunachalam Narayanaperumal, Vijayaraghavan Lakshmanan

MSEC 2015; V001T02A111doi:https://doi.org/10.1115/MSEC2015-9416

Abstract

View Articletitled, Evaluation of the Working Surface of the Grinding Wheel Using Speckle Image Analysis

PDF

Topics: Grinding wheels , Wheels , Surface quality , Wear , Cutting , Electromagnetic scattering , Grinding , Grinding equipment , Imaging , Lasers

Dual-Tree Wavelet Packet Transform for Ultrasonic Data Transmission Through Metal Structures

Jinjiang Wang, Robert X. Gao, Xinyao Tang, Zhaoyan Fan, Peng Wang

MSEC 2015; V001T02A112doi:https://doi.org/10.1115/MSEC2015-9463

Abstract

View Articletitled, Dual-Tree Wavelet Packet Transform for Ultrasonic Data Transmission Through Metal Structures

PDF

Topics: Metalwork , Wavelets , Signal processing , Signal to noise ratio , Signals , Waves , Contamination , Diffraction , Manufacturing , Noise (Sound)

Investigation of the Relationship Between Vibration Data and Tool Wear During End-Milling of Gamma-Prime Strengthened Alloys

Vasileios Bardis, Farbod Akhavan Niaki, Durul Ulutan, Laine Mears

MSEC 2015; V001T02A113doi:https://doi.org/10.1115/MSEC2015-9470

Abstract

View Articletitled, Investigation of the Relationship Between Vibration Data and Tool Wear During End-Milling of Gamma-Prime Strengthened Alloys

PDF

Topics: Alloys , Milling , Vibration , Wear , Machining , Accelerometers , Machinery , Maintenance , Optical microscopes , Sensors

Substitution and Enhancement of Traditional Manufacturing Processes With Laser-Based Techniques: Technical and Economic Feasibility

Laser Profiling of Aluminum Oxide Grinding Wheels

Adrian H. A. Lutey, Alessandro Fortunato, Simone Carmignato, Filippo Zanini, Alessandro Ascari

MSEC 2015; V001T02A114doi:https://doi.org/10.1115/MSEC2015-9293

Abstract

View Articletitled, Laser Profiling of Aluminum Oxide Grinding Wheels

PDF

Topics: Aluminum , Grinding wheels , Lasers , Separation (Technology) , Ablation (Vaporization technology) , Computerized tomography , Density , Diamonds , Fiber lasers , Fluence (Radiation measurement)