Volumes | International Manufacturing Science and Engineering Conference | American Society of Mechanical Engineers Digital Collection

Topics: Maintenance , Production planning , Algorithms , Machinery , Manufacturing tools , Optimization algorithms , Logistics , Manufacturing , Manufacturing systems , Resource allocation

Multi-Zone Proportional Hazard Model for a Multi-Stage Degradation Process

Lin Li, Zeyi Sun, Xinwei Xu, Kaifu Zhang

MSEC 2013; V002T02A013https://doi.org/10.1115/MSEC2013-1113

Abstract

View Articletitled, Multi-Zone Proportional Hazard Model for a Multi-Stage Degradation Process

PDF

Topics: Hazards , Condition monitoring , Decision making , Machinery , Maintenance , Modeling , Reliability , Service life (Equipment)

Mixed-Model Assembly Line Sequencing Optimization Based on Workstation Overload Analysis

Zhaoliang Jiang, Zhi Li

MSEC 2013; V002T02A014https://doi.org/10.1115/MSEC2013-1182

Abstract

View Articletitled, Mixed-Model Assembly Line Sequencing Optimization Based on Workstation Overload Analysis

PDF

Topics: Assembly lines , Optimization , Pareto optimization

Manufacturing and Metrology Systems

Measuring Dynamic 3D Micro-Structures Using a Superfast Digital Binary Phase-Shifting Technique

Song Zhang, Yajun Wang, Jacob I. Laughner, Igor R. Efimov

MSEC 2013; V002T02A015https://doi.org/10.1115/MSEC2013-1088

Abstract

View Articletitled, Measuring Dynamic 3D Micro-Structures Using a Superfast Digital Binary Phase-Shifting Technique

PDF

Topics: Shapes

Curvature Estimation for Metrology of Non-Rigid Parts

Ali Aidibe, Souheil-Antoine Tahan

MSEC 2013; V002T02A016https://doi.org/10.1115/MSEC2013-1122

Abstract

View Articletitled, Curvature Estimation for Metrology of Non-Rigid Parts

PDF

Topics: Deformation , Metrology

Reconciling the Differences Between Tolerance Specification and Measurement Methods

Prabath Vemulapalli, Jami J. Shah, Joseph K. Davidson

MSEC 2013; V002T02A017https://doi.org/10.1115/MSEC2013-1206

Abstract

View Articletitled, Reconciling the Differences Between Tolerance Specification and Measurement Methods

PDF

Topics: Algorithms , Computer software , Coordinate measuring machines , Fittings , Inspection , Measurement uncertainty , National Institute of Standards and Technology

Optimal Motor Location for the Reduction of Residual Vibrations in Mode-Coupled Ultra-Precision Manufacturing Machines

Chinedum E. Okwudire, Jihyun Lee

MSEC 2013; V002T02A018https://doi.org/10.1115/MSEC2013-1228

Abstract

View Articletitled, Optimal Motor Location for the Reduction of Residual Vibrations in Mode-Coupled Ultra-Precision Manufacturing Machines

PDF

Topics: Design , Engines , Machinery , Manufacturing , Motors , Vibration

Manufacturing Systems and Technologies for Rapid Responses and Supply Chain Integration

Key Technologies of Embedded Gear Machining CNC System

Jiang Han, Xiao-qing Tian, Lian Xia, Fu-gen Li, Jie Cheng, Bao Chen

MSEC 2013; V002T02A019https://doi.org/10.1115/MSEC2013-1083

Abstract

View Articletitled, Key Technologies of Embedded Gear Machining CNC System

PDF

Topics: Computer numerical control machine tools , Computer programming , Databases , Gears , Machining , Mechanical drives

Developing an Agility Model for Maximum Responsiveness to the Changes in Customer Requirements for SMEs

Mohamed A. Gadalla

MSEC 2013; V002T02A020https://doi.org/10.1115/MSEC2013-1148

Abstract

View Articletitled, Developing an Agility Model for Maximum Responsiveness to the Changes in Customer Requirements for SMEs

PDF

Topics: Manufacturing , Pressure

Manual Precedence Mapping and Application of a Novel Precedence Relationship Learning Technique to Real-World Automotive Assembly Line Balancing

Kavit R. Antani, Bryan Pearce, Mary E. Kurz, Laine Mears, Kilian Funk, Maria E. Mayorga

MSEC 2013; V002T02A021https://doi.org/10.1115/MSEC2013-1235

Abstract

View Articletitled, Manual Precedence Mapping and Application of a Novel Precedence Relationship Learning Technique to Real-World Automotive Assembly Line Balancing

PDF

Topics: Assembly-line balancing

Monitoring, Sensing, and Control for Intelligent Machining and Inspection

A Model Based Computationally Efficient Method for On-Line Detection of Chatter in Milling

Lei Ma, Shreyes Melkote, James Castle

MSEC 2013; V002T02A022https://doi.org/10.1115/MSEC2013-1031

Abstract

View Articletitled, A Model Based Computationally Efficient Method for On-Line Detection of Chatter in Milling

PDF

Topics: Chatter , Milling

Correlating Acoustic Emission to Calibration Phenomena for Possible Measurement Standard

James Griffin

MSEC 2013; V002T02A023https://doi.org/10.1115/MSEC2013-1036

Abstract

View Articletitled, Correlating Acoustic Emission to Calibration Phenomena for Possible Measurement Standard

PDF

Topics: Acoustic emissions , Artificial neural networks , Calibration , Measurement units and standards

Analytical Modeling and Experimental Validation of Force Ripple and Friction Force for General Direct Drive Systems

Ran Zhao, Chengying Xu

MSEC 2013; V002T02A024https://doi.org/10.1115/MSEC2013-1058

Abstract

View Articletitled, Analytical Modeling and Experimental Validation of Force Ripple and Friction Force for General Direct Drive Systems

PDF

Topics: Friction , Modeling , Optimization , Errors , Particle swarm optimization , Sliding friction

Adaptive Robust Control of Circular Machining Contour Error Using Global Task Coordinate Frame

Tyler A. Davis, Yung C. Shin, Bin Yao

MSEC 2013; V002T02A025https://doi.org/10.1115/MSEC2013-1108

Abstract

View Articletitled, Adaptive Robust Control of Circular Machining Contour Error Using Global Task Coordinate Frame

PDF

Topics: Deflection , Errors , Machining , Robust control

Model Learning in a Multistage Machining Process: Online Identification of Force Coefficients and Model Use in the Manufacturing Enterprise

Parikshit Mehta, Laine Mears

MSEC 2013; V002T02A026https://doi.org/10.1115/MSEC2013-1144

Abstract

View Articletitled, Model Learning in a Multistage Machining Process: Online Identification of Force Coefficients and Model Use in the Manufacturing Enterprise

PDF

Topics: Machining , Manufacturing , Process control , Chatter , Control algorithms , Cutting , Machinery , Materials properties , Numerical analysis , Optimization

Remaining Useful Tool Life Predictions Using Bayesian Inference

Jaydeep Karandikar, Tom McLeay, Sam Turner, Tony Schmitz

MSEC 2013; V002T02A027https://doi.org/10.1115/MSEC2013-1152

Abstract

View Articletitled, Remaining Useful Tool Life Predictions Using Bayesian Inference

PDF

Topics: Machining , Milling , Probability , Titanium , Uncertainty , Wear

Combined Temperature and Force Control for Robotic Friction Stir Welding

Axel Fehrenbacher, Christopher B. Smith, Neil A. Duffie, Nicola J. Ferrier, Frank E. Pfefferkorn, Michael R. Zinn

MSEC 2013; V002T02A028https://doi.org/10.1115/MSEC2013-1161

Abstract

View Articletitled, Combined Temperature and Force Control for Robotic Friction Stir Welding

PDF

Topics: Force control , Friction , Robotics , Temperature , Welding , Control systems , Control equipment , Energy consumption , Geometry , Joining

Estimation of Milling Forces From Compliant Sensors Using a Harmonic Force Model and Kalman Filter

Min Hyong Koh, Mehdi Nouri, Barry K. Fussell

MSEC 2013; V002T02A029https://doi.org/10.1115/MSEC2013-1196

Abstract

View Articletitled, Estimation of Milling Forces From Compliant Sensors Using a Harmonic Force Model and Kalman Filter

PDF

Topics: Kalman filters , Milling , Sensors , Cutting , Delays , Vibration , Computation , Computer numerical control machine tools , Dynamic models , Dynamics (Mechanics)

Uncertainty Analysis of Tool Wear and Surface Roughness in End Milling

A. Sequera, Y. B. Guo

MSEC 2013; V002T02A030https://doi.org/10.1115/MSEC2013-1245

Abstract

View Articletitled, Uncertainty Analysis of Tool Wear and Surface Roughness in End Milling

PDF

Topics: Milling , Surface roughness , Uncertainty , Uncertainty analysis , Wear

Methodology for Ball Screw Component Health Assessment and Failure Analysis

Wenjing Jin, Yan Chen, Jay Lee

MSEC 2013; V002T02A031https://doi.org/10.1115/MSEC2013-1252

Abstract

View Articletitled, Methodology for Ball Screw Component Health Assessment and Failure Analysis

PDF

Topics: Failure , Failure analysis , Screws

System Informatics for Quality and Reliability Improvements in Manufacturing Systems

Quality Evaluation of Multistage Manufacturing Systems by Jointly Considering the Incoming Part Quality and System Conditions

Faping Zhang, Jingjing Li, Yan Yan, Jiping Lu, Shuiyuan Tang

MSEC 2013; V002T02A032https://doi.org/10.1115/MSEC2013-1136

Abstract

View Articletitled, Quality Evaluation of Multistage Manufacturing Systems by Jointly Considering the Incoming Part Quality and System Conditions

PDF

Topics: Manufacturing systems , Product quality , Probability , Quality management , Transfer functions , Uncertainty

Monitoring Multistage Surface Spatial Variations Using Functional Morphing

Saumuy Suriano, Hui Wang, S. Jack Hu

MSEC 2013; V002T02A033https://doi.org/10.1115/MSEC2013-1203

Abstract

View Articletitled, Monitoring Multistage Surface Spatial Variations Using Functional Morphing

PDF

Topics: Algorithms , Linkages , Machining , Manufacturing , Process monitoring , Resolution (Optics) , Shapes , Statistical process control

Automated Part Inspection Using 3D Point Clouds

Lee J. Wells, Mohammed S. Shafae, Jaime A. Camelio

MSEC 2013; V002T02A034https://doi.org/10.1115/MSEC2013-1212

Abstract

View Articletitled, Automated Part Inspection Using 3D Point Clouds

PDF

Topics: Inspection , Quality control

Micro and Nano Technologies

Fabrication of Nano-Systems and Materials

Effect of Mechanical Alloying on Al6061-Graphene Composite Fabricated by Semi-Solid Powder Processing

Mina Bastwros, Gap-Yong Kim, Can Zhu, Kun Zhang, Shiren Wang

MSEC 2013; V002T03A001https://doi.org/10.1115/MSEC2013-1078

Abstract

View Articletitled, Effect of Mechanical Alloying on Al6061-Graphene Composite Fabricated by Semi-Solid Powder Processing

PDF

Topics: Composite materials , Graphene , Mechanical properties , Bending strength , Compacting , Density , Fracture (Materials) , Fracture (Process) , Metallic composites , Milling

Study of the Effect of Anode/Cathode Geometry on the Yield Rate and Quality of the MWCNTs Synthesized by Submerged Arc Discharging

Osama M. Awadallah, Ragaie M. Rashad, Abdalla S. Wifi

MSEC 2013; V002T03A002https://doi.org/10.1115/MSEC2013-1079

Abstract

View Articletitled, Study of the Effect of Anode/Cathode Geometry on the Yield Rate and Quality of the MWCNTs Synthesized by Submerged Arc Discharging

PDF

Topics: Anodes , Geometry , Multi-walled carbon nanotubes

AFM-Based Nanofabrication: Modeling, Simulation, and Experimental Verification

Rapeepan Promyoo, Hazim El-Mounayri, Varun Kumar Karingula, Kody Varahramyan

MSEC 2013; V002T03A003https://doi.org/10.1115/MSEC2013-1091

Abstract

View Articletitled, AFM-Based Nanofabrication: Modeling, Simulation, and Experimental Verification

PDF

Topics: Atomic force microscopy , Modeling , Molecular dynamics , Nanofabrication , Nanoindentation , Simulation

Micro-Milling Responses of Hierarchical Graphene Composites

Bryan Chu, Johnson Samuel, Nikhil Koratkar

MSEC 2013; V002T03A004https://doi.org/10.1115/MSEC2013-1099

Abstract

View Articletitled, Micro-Milling Responses of Hierarchical Graphene Composites

PDF

Topics: Composite materials , Graphene , Micromachining , Micromilling , Platelets

Fabrication and Characterization of Photonic Crystals by Two-Photon Polymerization Using a Femtosecond Laser

Yinan Tian, Yung C. Shin, Galen B. King

MSEC 2013; V002T03A005https://doi.org/10.1115/MSEC2013-1126

Abstract

View Articletitled, Fabrication and Characterization of Photonic Crystals by Two-Photon Polymerization Using a Femtosecond Laser

PDF

Topics: Crystals , Lasers , Manufacturing , Photons , Polymerization , Fourier transform infrared spectroscopy , Diffraction , Energy gap , Resolution (Optics) , Shrinkage (Materials)

The Effect of Warm Accumulative Roll Bonding and Post Process Treatment on Microstructure and Mechanical Behavior of CP-Ti

Justin L. Milner, Fadi Abu-Farha, Thomas Kurfess

MSEC 2013; V002T03A006https://doi.org/10.1115/MSEC2013-1224

Abstract

View Articletitled, The Effect of Warm Accumulative Roll Bonding and Post Process Treatment on Microstructure and Mechanical Behavior of CP-Ti

PDF

Topics: Bonding , Mechanical behavior , Titanium

Ultrasound Induced Synthesis of CdS Nanocrystals Under Continuous Flow

Barath Palanisamy, Brian Paul

MSEC 2013; V002T03A007https://doi.org/10.1115/MSEC2013-1225

Abstract

View Articletitled, Ultrasound Induced Synthesis of CdS Nanocrystals Under Continuous Flow

PDF

Topics: Flow (Dynamics) , Nanocrystals , Ultrasound , Heating , Nanoparticles , Acoustics , Cavitation , Design , Excitons , Particle size

All Solution-Based Fabrication of CIGS Solar Cell

Robert L. Vittoe, Tung Ho, Sudhir Shrestha, Mangilal Agarwal, Kody Varahramyan

MSEC 2013; V002T03A008https://doi.org/10.1115/MSEC2013-1239

Abstract

View Articletitled, All Solution-Based Fabrication of CIGS Solar Cell

PDF

Topics: Manufacturing , Solar cells , Circuits , Copper , Gallium , Spraying (Coating processes) , Thin films , Chemical processes , Energy sustainability , Nanoparticles

Paper-Based Lithium Magnesium Oxide Battery

Nojan Aliahmad, Mangilal Agarwal, Sudhir Shrestha, Kody Varahramyan

MSEC 2013; V002T03A009https://doi.org/10.1115/MSEC2013-1243

Abstract

View Articletitled, Paper-Based Lithium Magnesium Oxide Battery

PDF

Topics: Batteries , Lithium , Magnesium (Metal) , Weight (Mass) , Adhesion , Electrodes , Fibers , Lithium-ion batteries , Manufacturing , Metals

New Developments in Micro/Nano Manufacturing and Micro/Nano Metrology

Multi-Objective Optimization of Microturning Process Parameters Using Particle Swarm Technique

Nithin Tom Mathew, Kanthababu Mani

MSEC 2013; V002T03A010https://doi.org/10.1115/MSEC2013-1011

Abstract

View Articletitled, Multi-Objective Optimization of Microturning Process Parameters Using Particle Swarm Technique

PDF

Topics: Pareto optimization , Particle swarm optimization , Particulate matter , Surface roughness , Wear , Optimization algorithms

A Motion Study of a Manipulator for Transferring Microparts in a Multi Stage Former

Rasoul Mahshid, Hans Nørgaard Hansen, Casper Hansen, Mogens Arentoft

MSEC 2013; V002T03A011https://doi.org/10.1115/MSEC2013-1072

Abstract

View Articletitled, A Motion Study of a Manipulator for Transferring Microparts in a Multi Stage Former

PDF

Topics: Manipulators , Image formation , Resolution (Optics) , Sensors

Fabrication of Chitosan Porous Structure and Applications on Artificial Photosynthesis Device

Xiang Ren, Miao Yu, Xiaohang Zhou, Qingwei Zhang, Jack Zhou

MSEC 2013; V002T03A012https://doi.org/10.1115/MSEC2013-1109

Abstract

View Articletitled, Fabrication of Chitosan Porous Structure and Applications on Artificial Photosynthesis Device

PDF

Topics: Image processing , Manufacturing , Solar chemistry , Casting , Molding , Absorption , Additive manufacturing , Carbon dioxide , Chemical kinetics , Energy sustainability

An Investigation on Electrochemical Discharge Micro-Drilling of Glass

Mohammad Reza Razfar, Jun Ni, Ali Behroozfar, Shuhuai Lan

MSEC 2013; V002T03A013https://doi.org/10.1115/MSEC2013-1135

Abstract

View Articletitled, An Investigation on Electrochemical Discharge Micro-Drilling of Glass

PDF

Topics: Drilling , Electrical discharge machining , Glass , Response surface methodology

A Critical Factor in Enhancement of MQL Lubricants: Platelet Thickness

Trung Kien Nguyen, Patrick Y. Kwon, Kyung-Hee Park

MSEC 2013; V002T03A014https://doi.org/10.1115/MSEC2013-1145

Abstract

View Articletitled, A Critical Factor in Enhancement of MQL Lubricants: Platelet Thickness

PDF

Topics: Lubricants , Platelets , Machining , Wear , Ball milling , Ball mills , Friction , Graphite , Lubrication , Tribometers

Line-Based Laser Induced Plasma Micro-Machining (L-LIPMM)

Rajiv Malhotra, Ishan Saxena, Kornel Ehmann, Jian Cao

MSEC 2013; V002T03A015https://doi.org/10.1115/MSEC2013-1153

Abstract

View Articletitled, Line-Based Laser Induced Plasma Micro-Machining (L-LIPMM)

PDF

Topics: Lasers , Micromachining , Plasmas (Ionized gases)

Embedding Information on Metal Surfaces by Micro-Milling

Tesswin Thomas, Sathyan Subbiah, Adams Wai Kin Kong

MSEC 2013; V002T03A016https://doi.org/10.1115/MSEC2013-1173

Abstract

View Articletitled, Embedding Information on Metal Surfaces by Micro-Milling

PDF

Topics: Metal surfaces , Micromilling , Storage , Disks , Information retrieval , Metals , Milling , Water

Burr Formation and Surface Quality in High Speed Micromilling of Titanium Alloy (Ti6Al4V)

Vivek Bajpai, Ajay K. Kushwaha, Ramesh K. Singh

MSEC 2013; V002T03A017https://doi.org/10.1115/MSEC2013-1216

Abstract

View Articletitled, Burr Formation and Surface Quality in High Speed Micromilling of Titanium Alloy (Ti6Al4V)

PDF

Topics: Finishes , Micromilling , Surface quality , Titanium alloys

Sustainable Manufacturing

Sustainable Manufacturing for Emerging Technologies

Dilute Acid Pretreatment and Enzymatic Hydrolysis of Woody Biomass for Biofuel Manufacturing: Effects of Particle Size on Sugar Conversion

Meng Zhang, Xiaoxu Song, Pengfei Zhang, Z. J. Pei

MSEC 2013; V002T04A001https://doi.org/10.1115/MSEC2013-1050

Abstract

View Articletitled, Dilute Acid Pretreatment and Enzymatic Hydrolysis of Woody Biomass for Biofuel Manufacturing: Effects of Particle Size on Sugar Conversion

PDF

Topics: Biofuel , Biomass , Manufacturing , Particle size

High Speed Turning of AISI 4140 Steel Using Nanofluid Through Twin Jet SQL System

Sougata Roy, Amitava Ghosh

MSEC 2013; V002T04A002https://doi.org/10.1115/MSEC2013-1067

Abstract

View Articletitled, High Speed Turning of AISI 4140 Steel Using Nanofluid Through Twin Jet SQL System

PDF

Topics: Cutting , Nanofluids , Steel , Stress , Turning

Laser Beam Forming: Experimental Investigation and Statistical Analysis of the Effects of Parameters on Bending Angle

Stephen Akinlabi, Mukul Shukla, Tshilidzi Marwala

MSEC 2013; V002T04A003https://doi.org/10.1115/MSEC2013-1215

Abstract

View Articletitled, Laser Beam Forming: Experimental Investigation and Statistical Analysis of the Effects of Parameters on Bending Angle

PDF

Topics: Laser beams , Statistical analysis , Lasers , Cooling , Manufacturing , Steel , Coolants , Design , Experimental design , Flow (Dynamics)

Sustainable Manufacturing Systems and Enterprises

Virtual Enterprise Architectural Framework: Collaboration for Small and Medium Enterprises

A. H. M. Shamsuzzoha, Petri Helo

MSEC 2013; V002T04A004https://doi.org/10.1115/MSEC2013-1004

Abstract

View Articletitled, Virtual Enterprise Architectural Framework: Collaboration for Small and Medium Enterprises

PDF

Topics: Collaboration , Data storage systems , Manufacturing , Optimization , Performance , Simulation , User interfaces , Visualization

Modeling of Multi-Cell Lithium-Ion Battery Packs for Electric Vehicles Considering Effects of Manufacturing Processes

Chongye Wang, Yong Wang, Lin Li, Hua Shao, Changxu Wu

MSEC 2013; V002T04A005https://doi.org/10.1115/MSEC2013-1120

Abstract

View Articletitled, Modeling of Multi-Cell Lithium-Ion Battery Packs for Electric Vehicles Considering Effects of Manufacturing Processes

PDF

Topics: Electric vehicles , Lithium-ion batteries , Manufacturing , Modeling , Batteries , Carbon dioxide , Chemical properties , Dynamics (Mechanics) , Emissions , Engineers

Effects of Ultrasonic Vibration-Assisted Pelleting on Sugar Yield in Biofuel Manufacturing With Different Pretreatment Methods

Elizabeth Kennedy, Pengfei Zhang, Qi Zhang, Z. J. Pei, Donghai Wang

MSEC 2013; V002T04A006https://doi.org/10.1115/MSEC2013-1143

Abstract

View Articletitled, Effects of Ultrasonic Vibration-Assisted Pelleting on Sugar Yield in Biofuel Manufacturing With Different Pretreatment Methods

PDF

Topics: Biofuel , Biomass , Manufacturing , Vibration

Modeling, Analysis, and Improvement of Door Production Line at an Automotive Body Shop

Cong Zhao, Jingshan Li

MSEC 2013; V002T04A007https://doi.org/10.1115/MSEC2013-1155

Abstract

View Articletitled, Modeling, Analysis, and Improvement of Door Production Line at an Automotive Body Shop

PDF

Topics: Assembly lines , Doors , Manufacturing systems , Modeling analysis

Energy Savings Opportunities of an Integrated Facility and Production Line

Michael P. Brundage, Qing Chang, Dongmei Chen, Victor Yu

MSEC 2013; V002T04A008https://doi.org/10.1115/MSEC2013-1191

Abstract

View Articletitled, Energy Savings Opportunities of an Integrated Facility and Production Line

PDF

Topics: Assembly lines , HVAC equipment , Air conditioning , Heating , Machinery , Manufacturing , Manufacturing systems , Production facilities , Simulation , Ventilation