Volumes | International Manufacturing Science and Engineering Conference | American Society of Mechanical Engineers Digital Collection

Skip Nav Destination

Volume 1: Processing

Processing

Additive Manufacturing

Mechanical Behavior of Ti-6Al-4V Manufactured by Electron Beam Additive Fabrication

Leila Ladani, Lalit Roy

MSEC 2013; V001T01A001https://doi.org/10.1115/MSEC2013-1105

Abstract

View Articletitled, Mechanical Behavior of Ti-6Al-4V Manufactured by Electron Beam Additive Fabrication

PDF

Topics: Cathode ray oscilloscopes , Electron beams , Manufacturing , Mechanical behavior , Tensile strength , Anisotropy , Mechanical properties , Aerospace industry , Corrosion resistance , Density

Characterization of Sintered Ti-6Al-4V Powders in Electron Beam Additive Manufacturing

Xibing Gong, Kevin Chou

MSEC 2013; V001T01A002https://doi.org/10.1115/MSEC2013-1131

Abstract

View Articletitled, Characterization of Sintered Ti-6Al-4V Powders in Electron Beam Additive Manufacturing

PDF

Topics: Additive manufacturing , Alloys , Cathode ray oscilloscopes , Electron beams , Sintering

Improving Densification of Zirconium Tungstate With Nano Tungsten Trioxide and Sintering Aids

M. Wang, P. Kwon

MSEC 2013; V001T01A003https://doi.org/10.1115/MSEC2013-1159

Abstract

View Articletitled, Improving Densification of Zirconium Tungstate With Nano Tungsten Trioxide and Sintering Aids

PDF

Topics: Density , Sintering , Tungsten , Zirconium

Advances in Biomedical Manufacturing

Characterization of Printable Micro-Fluidic Channels for Organ Printing

Yahui Zhang, Yin Yu, Ibrahim Tarik Ozbolat

MSEC 2013; V001T01A004https://doi.org/10.1115/MSEC2013-1024

Abstract

View Articletitled, Characterization of Printable Micro-Fluidic Channels for Organ Printing

PDF

Topics: Bioprinting , Microfluidics , Manufacturing , Biological tissues , Diffusion (Physics) , Dimensions , Flow (Dynamics) , Fluids , Geometry , Tissue engineering

Development of a Multi-Arm Bioprinter for Hybrid Tissue Engineering

Howard Chen, Ibrahim T. Ozbolat

MSEC 2013; V001T01A005https://doi.org/10.1115/MSEC2013-1025

Abstract

View Articletitled, Development of a Multi-Arm Bioprinter for Hybrid Tissue Engineering

PDF

Topics: Tissue engineering , Cartilage , Manufacturing , Biological tissues , Bioprinting , Geometry , Printing , Rapid prototyping , Robots , Stem cells

Bioprinting Induced Cell Damage in Cellular Micro-Fluidic Channel Fabrication

Yin Yu, Ibrahim T. Ozbolat

MSEC 2013; V001T01A006https://doi.org/10.1115/MSEC2013-1081

Abstract

View Articletitled, Bioprinting Induced Cell Damage in Cellular Micro-Fluidic Channel Fabrication

PDF

Topics: Bioprinting , Damage , Manufacturing , Microfluidics , Biological tissues , Nozzles , Biomaterials , Cartilage , Geometry , Hydrogels

Cutting Force of Hollow Needle Insertion in Soft Tissue

Bruce L. Tai, Yancheng Wang, Albert J. Shih

MSEC 2013; V001T01A007https://doi.org/10.1115/MSEC2013-1124

Abstract

View Articletitled, Cutting Force of Hollow Needle Insertion in Soft Tissue

PDF

Topics: Cutting , Needles , Soft tissues

Microcellular Injection Molding of Thermoplastic Polyurethane (TPU) Scaffolds Using Carbon Dioxide and Water as Co-Blowing Agents

Hao-Yang Mi, Xin Jing, Lih-Sheng Turng, Xiang-Fang Peng

MSEC 2013; V001T01A008https://doi.org/10.1115/MSEC2013-1154

Abstract

View Articletitled, Microcellular Injection Molding of Thermoplastic Polyurethane (TPU) Scaffolds Using Carbon Dioxide and Water as Co-Blowing Agents

PDF

Topics: Carbon dioxide , Injection molding , Tissue scaffolds , Urethane elastomers , Water

Feasibility of Laser Surface Texturing for Friction Reduction in Surgical Blades

Tim Velasquez, Peidong Han, Jian Cao, Kornel F. Ehmann

MSEC 2013; V001T01A009https://doi.org/10.1115/MSEC2013-1193

Abstract

View Articletitled, Feasibility of Laser Surface Texturing for Friction Reduction in Surgical Blades

PDF

Topics: Blades , Friction , Lasers , Surgery

Advances in Materials Forming

Simulation and Experiment on Warm Hydroforming of AZ31 Magnesium Alloy Tube

Shijian Yuan, Zejun Tang, Gang Liu

MSEC 2013; V001T01A010https://doi.org/10.1115/MSEC2013-1084

Abstract

View Articletitled, Simulation and Experiment on Warm Hydroforming of AZ31 Magnesium Alloy Tube

PDF

Topics: Magnesium alloys , Pressure , Simulation , Temperature

An Investigation of Sheet Metal Deformation Behavior During Electro-Hydraulic Forming (EHF)

Aashish Rohatgi, Elizabeth V. Stephens, Richard W. Davies, Mark T. Smith

MSEC 2013; V001T01A011https://doi.org/10.1115/MSEC2013-1129

Abstract

View Articletitled, An Investigation of Sheet Metal Deformation Behavior During Electro-Hydraulic Forming (EHF)

PDF

Topics: Deformation , Sheet metal , Pressure , Sheet materials , Gages , Imaging

Die Wear and Galling in Stamping DP980 Steel

Hua-Chu Shih, Changqing Du, Dajun Zhou

MSEC 2013; V001T01A012https://doi.org/10.1115/MSEC2013-1142

Abstract

View Articletitled, Die Wear and Galling in Stamping DP980 Steel

PDF

Topics: Galling , Metal stamping , Steel , Wear , Tension , Countermeasures , Deformation , Friction , Heat , Lubrication

An Approach for Increasing Branch Height of a Hydroforming T-Joint With Smaller Branch Diameter

Junyang Peng, Gang Liu, Bugang Teng, Xiaosong Wang, Sule Feng

MSEC 2013; V001T01A013https://doi.org/10.1115/MSEC2013-1169

Abstract

View Articletitled, An Approach for Increasing Branch Height of a Hydroforming T-Joint With Smaller Branch Diameter

PDF

Topics: Calibration , Deformation , Engineering simulation , Finite element methods , Simulation , Stainless steel , Stress

Experimental Study of Biaxial Load-Unload Behavior of DP590 Steel Sheets

Yannis P. Korkolis, Nengxiu Deng, Toshihiko Kuwabara

MSEC 2013; V001T01A014https://doi.org/10.1115/MSEC2013-1171

Abstract

View Articletitled, Experimental Study of Biaxial Load-Unload Behavior of DP590 Steel Sheets

PDF

Topics: Anisotropy , Steel sheet , Stress , Cycles , Density , Engineering simulation , High strength steel , Simulation , Steel

Analytical Design and Implementation of a Uniform Pressure Actuator for Electromagnetic Forming and Welding

E. Thibaudeau, B. L. Kinsey

MSEC 2013; V001T01A015https://doi.org/10.1115/MSEC2013-1238

Abstract

View Articletitled, Analytical Design and Implementation of a Uniform Pressure Actuator for Electromagnetic Forming and Welding

PDF

Topics: Actuators , Analytical design , Pressure , Welding , Design , Modeling , Finite element analysis , Sheet metal , Aerospace industry , Electronics

Austenite-Martensite Phase Transformation of Biomedical Ni_50.8Ti_49.2 Alloy by Ball Burnishing

C. H. Fu, Y. B. Guo, X. T. Wei

MSEC 2013; V001T01A016https://doi.org/10.1115/MSEC2013-1241

Abstract

View Articletitled, Austenite-Martensite Phase Transformation of Biomedical Ni50.8Ti49.2 Alloy by Ball Burnishing

PDF

Topics: Alloys , Biomedicine , Nickel titanium alloys , Phase transitions

Analysis of Fiber Optic Sensor to Measure Velocity During Electromagnetic Forming and Welding

E. Thibaudeau, B. Turner, T. Gross, B. L. Kinsey

MSEC 2013; V001T01A017https://doi.org/10.1115/MSEC2013-1242

Abstract

View Articletitled, Analysis of Fiber Optic Sensor to Measure Velocity During Electromagnetic Forming and Welding

PDF

Topics: Fiber optic sensors , Welding , Sensors , Displacement , Reflectance , Deformation , Fibers , Lasers , Photography , Photons

An Investigation of Anisotropic Behavior on 5083 Aluminum Alloy Using Electric Current

Abram D. Pleta, Matthew C. Krugh, Chetan Nikhare, John T. Roth

MSEC 2013; V001T01A018https://doi.org/10.1115/MSEC2013-1244

Abstract

View Articletitled, An Investigation of Anisotropic Behavior on 5083 Aluminum Alloy Using Electric Current

PDF

Topics: Aluminum alloys , Anisotropy , Electric current , Alloys , Aluminum , Density , Manufacturing , Mechanical properties , Regulations , Sheet metal work

A Novel Hybrid Process for Drawing Operations

Kyle Pender, Gracious Ngaile

MSEC 2013; V001T01A019https://doi.org/10.1115/MSEC2013-1253

Abstract

View Articletitled, A Novel Hybrid Process for Drawing Operations

PDF

Topics: Electron microscopy , Fluid pressure , Fluids , High pressure (Physics) , Lubrication , Manufacturing , Stress

Advances in Modeling, Analysis, and Simulation of Manufacturing Processes

Rapid Finite Element Prediction on Machining Process

Long Meng, Xueping Zhang, Anil K. Srivastava

MSEC 2013; V001T01A020https://doi.org/10.1115/MSEC2013-1012

Abstract

View Articletitled, Rapid Finite Element Prediction on Machining Process

PDF

Topics: Computer programming , Finite element analysis , Finite element model , Machining , Stress , Cutting , Errors , Simulation , Temperature , Cooling

An Empirical Model for the Coefficient of Friction in Injection Molding of Thermoplastics

Omar Bataineh

MSEC 2013; V001T01A021https://doi.org/10.1115/MSEC2013-1018

Abstract

View Articletitled, An Empirical Model for the Coefficient of Friction in Injection Molding of Thermoplastics

PDF

Topics: Friction , Injection molding

Statistical Cutting Force Model for Orthogonal Cutting of Polytetrafluoroethylene (PTFE) Composites

Felicia Stan, Daniel Vlad, Catalin Fetecau

MSEC 2013; V001T01A022https://doi.org/10.1115/MSEC2013-1033

Abstract

View Articletitled, Statistical Cutting Force Model for Orthogonal Cutting of Polytetrafluoroethylene (PTFE) Composites

PDF

Topics: Composite materials , Cutting , Friction , Geometry , Polynomials , Taguchi methods , Thrust

Chip Segmentation in Machining: A Study of Deformation Localization Characteristics in Ti6Al4V

Abhijit Chandra, Pavan Karra, Adam Bragg, Jie Wang, Gap Yong Kim

MSEC 2013; V001T01A023https://doi.org/10.1115/MSEC2013-1070

Abstract

View Articletitled, Chip Segmentation in Machining: A Study of Deformation Localization Characteristics in Ti6Al4V

PDF

Topics: Deformation , Image segmentation , Machining , Shear (Mechanics) , Nonlinear dynamics , Computer simulation , Cutting , Evacuations , Work hardening

Analytical Cut Geometry Prediction for Free Form Surface During Semi-Finish Milling

Hendriko, Emmanuel Duc, Gandjar Kiswanto

MSEC 2013; V001T01A024https://doi.org/10.1115/MSEC2013-1086

Abstract

View Articletitled, Analytical Cut Geometry Prediction for Free Form Surface During Semi-Finish Milling

PDF

Topics: Finishes , Geometry , Milling

GPGPU Accelerated 3-Axis CNC Machining Simulation

Dmytro Konobrytskyi, Thomas Kurfess, Joshua Tarbutton, Tommy Tucker

MSEC 2013; V001T01A025https://doi.org/10.1115/MSEC2013-1096

Abstract

View Articletitled, GPGPU Accelerated 3-Axis CNC Machining Simulation

PDF

Topics: Computer numerical control machine tools , Machining , Simulation , Graphics processing units , Algorithms , Parallel processing , Clocks , Cycles , Design , Geometry

Fatigue Properties and Life Prediction of 8630 Cast Steel in the Presence of Weld Repair and Porosities

Alireza Shirazi, Ihab Ragai

MSEC 2013; V001T01A026https://doi.org/10.1115/MSEC2013-1119

Abstract

View Articletitled, Fatigue Properties and Life Prediction of 8630 Cast Steel in the Presence of Weld Repair and Porosities

PDF

Topics: Fatigue , Fatigue properties , Maintenance , Steel

Polycrystalline Diamond Turning of Rock

Demeng Che, Kornel F. Ehmann

MSEC 2013; V001T01A027https://doi.org/10.1115/MSEC2013-1127

Abstract

View Articletitled, Polycrystalline Diamond Turning of Rock

PDF

Topics: Cutting , Diamond turning , Diamonds , Polycrystalline diamond compact bits , Rocks

Finite Element Modeling on Dislocation Density and Grain Size Evolution in Machined Surface

Liqiang Ding, Xueping Zhang, C. Richard Liu

MSEC 2013; V001T01A028https://doi.org/10.1115/MSEC2013-1130

Abstract

View Articletitled, Finite Element Modeling on Dislocation Density and Grain Size Evolution in Machined Surface

PDF

Topics: Cutting , Dislocation density , Finite element analysis , Grain size , Modeling

Interface Delamination of Diamond-Coated Carbide Tools Considering Coating Fractures by XFEM

Ping Lu, Kevin Chou

MSEC 2013; V001T01A029https://doi.org/10.1115/MSEC2013-1132

Abstract

View Articletitled, Interface Delamination of Diamond-Coated Carbide Tools Considering Coating Fractures by XFEM

PDF

Topics: Carbide cutting tools , Coatings , Delamination , Diamond films , Diamonds , Fracture (Materials) , Fracture (Process)

Prediction of Distortion in Quenching-Tempering Processes for a SM256 Steel Component With Internal Thread

Zhenguo Nie, Yiming (Kevin) Rong, Gang Wang

MSEC 2013; V001T01A030https://doi.org/10.1115/MSEC2013-1139

Abstract

View Articletitled, Prediction of Distortion in Quenching-Tempering Processes for a SM256 Steel Component With Internal Thread

PDF

Topics: Quenching (Metalworking) , Steel , Thread

The Establishment of Coupled Electromagnetic-Thermal Analytical Model of Induction Heating System With Magnetic Flux Concentrator and the Study on the Effect of Magnetic Permeability to the Modeling

Tianxing Zhu, Xuekun Li, Feng Li, Yiming (Kevin) Rong

MSEC 2013; V001T01A031https://doi.org/10.1115/MSEC2013-1140

Abstract

View Articletitled, The Establishment of Coupled Electromagnetic-Thermal Analytical Model of Induction Heating System With Magnetic Flux Concentrator and the Study on the Effect of Magnetic Permeability to the Modeling

PDF

Topics: Electromagnetic induction , Heating , Magnetic flux , Modeling , Permeability , Annealing , Brazing , Design , Hardening , Heat

Phase Transformation Affected Quench Crack Study Using Finite Element Analysis

Zhichao (Charlie) Li, B. Lynn Ferguson

MSEC 2013; V001T01A032https://doi.org/10.1115/MSEC2013-1146

Abstract

View Articletitled, Phase Transformation Affected Quench Crack Study Using Finite Element Analysis

PDF

Topics: Cracking (Materials) , Finite element analysis , Fracture (Materials) , Fracture (Process) , Hardening , Phase transitions

A New Approach for a Simulation-Based Prediction of Torsional Chatter in Deep Hole Drilling With Extra-Long Twist Drills

E. Abele, D. Schäfer

MSEC 2013; V001T01A033https://doi.org/10.1115/MSEC2013-1184

Abstract

View Articletitled, A New Approach for a Simulation-Based Prediction of Torsional Chatter in Deep Hole Drilling With Extra-Long Twist Drills

PDF

Topics: Chatter , Drilling , Drills (Tools) , Simulation , Dynamics (Mechanics) , Computer simulation , Cutting , Emissions , Inertia (Mechanics) , Noise (Sound)

Three Dimensional Finite Element Analysis of Staggered Backward Flow Forming Process

Hemant Shinde, Pushkar Mahajan, Ramesh Singh, K. Narasimhan

MSEC 2013; V001T01A034https://doi.org/10.1115/MSEC2013-1219

Abstract

View Articletitled, Three Dimensional Finite Element Analysis of Staggered Backward Flow Forming Process

PDF

Topics: Finite element analysis , Flow (Dynamics) , Steel

Investigations on Performance of Various Ceramic Tooling While Milling Nickel-Based Superalloy

Yujie Chen, Justin L. Milner, Cristina Bunget, Laine Mears, Thomas R. Kurfess

MSEC 2013; V001T01A035https://doi.org/10.1115/MSEC2013-1220

Abstract

View Articletitled, Investigations on Performance of Various Ceramic Tooling While Milling Nickel-Based Superalloy

PDF

Topics: Ceramics , Milling , Nickel , Superalloys , Tooling , Wear

Bayesian-Based Probabilistic Force Modeling in Cold Rolling

John C. Wendel, Andrew W. Nelson, Arif S. Malik, Mark E. Zipf

MSEC 2013; V001T01A036https://doi.org/10.1115/MSEC2013-1226

Abstract

View Articletitled, Bayesian-Based Probabilistic Force Modeling in Cold Rolling

PDF

Topics: Cold rolling , Modeling , Gages , Probability , Yield strength , Carbon , Deflection , Manufacturing , Sheet metal , Stainless steel

Progressive Modeling and the Reconfiguration and Operations Planning Problem

Mohamed Ismail

MSEC 2013; V001T01A037https://doi.org/10.1115/MSEC2013-1231

Abstract

View Articletitled, Progressive Modeling and the Reconfiguration and Operations Planning Problem

PDF

Topics: Modeling , Manufacturing

Simulation of Surface Roughness Effects on Residual Stress in Laser Shock Peening

Peter J. Hasser, Arif S. Malik, Kristina Langer, Thomas J. Spradlin

MSEC 2013; V001T01A038https://doi.org/10.1115/MSEC2013-1232

Abstract

View Articletitled, Simulation of Surface Roughness Effects on Residual Stress in Laser Shock Peening

PDF

Topics: Laser hardening , Simulation , Stress , Surface roughness , Finite element analysis , Aluminum tube , Density , Errors , Fatigue life , Magnification

Evaluation of Fiber Orientation Prediction of Moldflow Using an Injection Molded IP Panel

Xianjun Sun, Yuan Gan, John Lasecki, Danielle Zeng, Li Qi, Lu Li, Jeff Webb, Jie Tao

MSEC 2013; V001T01A039https://doi.org/10.1115/MSEC2013-1255

Abstract

View Articletitled, Evaluation of Fiber Orientation Prediction of Moldflow Using an Injection Molded IP Panel

PDF

Topics: Computerized tomography , Eigenvalues , Fibers

Advances in Nontraditional Manufacturing Processes

An Experimental Study of the Phenomenon of Surface Alloying by EDM Process Using Inconel Tool Electrode

Sanjeev Kumar

MSEC 2013; V001T01A040https://doi.org/10.1115/MSEC2013-1014

Abstract

View Articletitled, An Experimental Study of the Phenomenon of Surface Alloying by EDM Process Using Inconel Tool Electrode

PDF

Topics: Electrical discharge machining , Electrodes , Steel

Mechanics of Modulation Assisted Machining

Ho Yeung, Yang Guo, Narayan K. Sundaram, James B. Mann, W. Dale Compton, Srinivasan Chandrasekar

MSEC 2013; V001T01A041https://doi.org/10.1115/MSEC2013-1068

Abstract

View Articletitled, Mechanics of Modulation Assisted Machining

PDF

Topics: Machining , Alloys , Energy dissipation , Force measurement

Experimental Investigation of Chip Formation and Surface Topology in Ultrasonic-Assisted Milling of X20Cr13 Stainless Steel

M. Mahdi Abootorabi Zarchi, M. R. Razfar, A. Abdullah

MSEC 2013; V001T01A042https://doi.org/10.1115/MSEC2013-1115

Abstract

View Articletitled, Experimental Investigation of Chip Formation and Surface Topology in Ultrasonic-Assisted Milling of X20Cr13 Stainless Steel

PDF

Topics: Milling , Stainless steel , Topology

Novel High Pressure Sealing System for Tube Hydroforming Operations

Scott W. Wagner, Kenny Ng, William J. Emblom, Jaime A. Camelio

MSEC 2013; V001T01A043https://doi.org/10.1115/MSEC2013-1194

Abstract

View Articletitled, Novel High Pressure Sealing System for Tube Hydroforming Operations

PDF

Topics: High pressure (Physics) , Sealing (Process) , Fluids , Microelectromechanical systems , Weight (Mass) , Automobiles , Automotive industry , Biomedicine , Cavities , Corporate average fuel economy

Edge Finishing and Deburring

Experimental Investigation and Modeling of Milling Burrs

Seyed Ali Niknam, Victor Songmene

MSEC 2013; V001T01A044https://doi.org/10.1115/MSEC2013-1176

Abstract

View Articletitled, Experimental Investigation and Modeling of Milling Burrs

PDF

Topics: Aluminum alloys , Milling , Modeling

An Experimental Study on Edge Chipping in Ultrasonic Vibration Assisted Grinding of Bio-Ceramic Materials

Hayelom D. Tesfay, Yuzhu Xie, Zhigang Xu, Bing Yan, Z. C. Li

MSEC 2013; V001T01A045https://doi.org/10.1115/MSEC2013-1188

Abstract

View Articletitled, An Experimental Study on Edge Chipping in Ultrasonic Vibration Assisted Grinding of Bio-Ceramic Materials

PDF

Topics: Ceramics , Grinding , Machining , Vibration

Analysis of 1D Abrasive Vibratory Finishing Using Acoustic Emission

Pradeep Kumar Prakasam, Sathyan Subbiah

MSEC 2013; V001T01A046https://doi.org/10.1115/MSEC2013-1210

Abstract

View Articletitled, Analysis of 1D Abrasive Vibratory Finishing Using Acoustic Emission

PDF

Topics: Acoustic emissions , Finishing

Equipment Design Innovations to Enhance Manufacturing Processes

Effect of Ball Nose End Mill Geometry on High Speed Machining of Ti6Al4V

Ramesh Kuppuswamy, Deon Bower, Poloko March

MSEC 2013; V001T01A047https://doi.org/10.1115/MSEC2013-1041

Abstract

View Articletitled, Effect of Ball Nose End Mill Geometry on High Speed Machining of Ti6Al4V

PDF

Topics: Geometry , High speed machining , Cutting , Adhesion , Alloys , High temperature , Titanium alloys , Aerospace industry , Biomedicine , Carbide cutting tools

Machining of VP20ISOF Steel With Resharpened Carbide Tools in End Milling

Ricardo Ribeiro Moura, Álisson Rocha Machado

MSEC 2013; V001T01A048https://doi.org/10.1115/MSEC2013-1052

Abstract

View Articletitled, Machining of VP20ISOF Steel With Resharpened Carbide Tools in End Milling

PDF

Topics: Carbide cutting tools , Machining , Milling , Steel , Cutting , Coatings , Wear , Design , Scanning electron microscopy

Design of a 3-DOF Compliant Parallel Mechanism for Displacement Amplification

Qiang Zeng, Kornel F. Ehmann

MSEC 2013; V001T01A049https://doi.org/10.1115/MSEC2013-1095

Abstract

View Articletitled, Design of a 3-DOF Compliant Parallel Mechanism for Displacement Amplification

PDF

Topics: Design , Displacement , Parallel mechanisms

A Study of the Impact of Workpiece Location on Machining Performance of a 2-DoF PKM Based Machine Tool

A. B. Koteswara Rao, Sanjay Darvekar, K. Ramji

MSEC 2013; V001T01A050https://doi.org/10.1115/MSEC2013-1100

Abstract

View Articletitled, A Study of the Impact of Workpiece Location on Machining Performance of a 2-DoF PKM Based Machine Tool

PDF

Topics: Kinematics , Machine tools , Machinery , Machining , Milling , Regression models , Surface roughness , Cutting , Deformation , Stress

Laser, Process Innovations and Energy Field Manufacturing Methodology

Mechanism of Fatigue Performance Enhancement in a Superhard Nanoparticles Integrated Nanocomposites by a Hybrid Manufacturing Technique

Dong Lin, Chang Ye, Sergey Suslov, Yiliang Liao, C. Richard Liu, Gary J. Cheng

MSEC 2013; V001T01A051https://doi.org/10.1115/MSEC2013-1040

Abstract

View Articletitled, Mechanism of Fatigue Performance Enhancement in a Superhard Nanoparticles Integrated Nanocomposites by a Hybrid Manufacturing Technique

PDF

Topics: Fatigue , Manufacturing , Nanocomposites , Nanoparticles , Laser hardening , Dislocations , Iron , Stress , Annealing , Dislocation density

A New Velocity Estimator for Motion Control Systems

Huawen Zheng, Guokun Zuo, Wenwu Zhang

MSEC 2013; V001T01A052https://doi.org/10.1115/MSEC2013-1066

Abstract

View Articletitled, A New Velocity Estimator for Motion Control Systems

PDF

Topics: Motion control

Residual Stress Analysis and Weld Bead Shape Study in Laser Welding of High Strength Steel

Wei Liu, Fanrong Kong, Radovan Kovacevic

MSEC 2013; V001T01A053https://doi.org/10.1115/MSEC2013-1102

Abstract

View Articletitled, Residual Stress Analysis and Weld Bead Shape Study in Laser Welding of High Strength Steel

PDF

Topics: High strength steel , Laser welding , Shapes , Stress analysis (Engineering) , Stress , Lasers , Welding , Heat treating (Metalworking) , Plates (structures) , ASTM International

Melt Pool Flow and Surface Evolution During Pulsed Laser Micro Polishing of Ti6Al4V

Chao Ma, Madhu Vadali, Neil A. Duffie, Frank E. Pfefferkorn, Xiaochun Li

MSEC 2013; V001T01A054https://doi.org/10.1115/MSEC2013-1117

Abstract

View Articletitled, Melt Pool Flow and Surface Evolution During Pulsed Laser Micro Polishing of Ti6Al4V

PDF

Topics: Flow (Dynamics) , Lasers , Polishing , Fluid dynamics , Cross section (Physics) , Finite element methods , Heat transfer , Optical images , Physics , Temperature

Comparison of Electrically-Assisted and Conventional Friction Stir Welding Processes by Feed Force and Torque

Hemanth Potluri, Joshua J. Jones, Laine Mears

MSEC 2013; V001T01A055https://doi.org/10.1115/MSEC2013-1192

Abstract

View Articletitled, Comparison of Electrically-Assisted and Conventional Friction Stir Welding Processes by Feed Force and Torque

PDF

Topics: Friction , Torque , Welding

Alternative Control of an Electrically-Assisted Tensile Forming Process Using Current Modulation

Joshua J. Jones, Laine Mears

MSEC 2013; V001T01A056https://doi.org/10.1115/MSEC2013-1197

Abstract

View Articletitled, Alternative Control of an Electrically-Assisted Tensile Forming Process Using Current Modulation

PDF

Topics: Architecture , Degrees of freedom , Electric current , Flow (Dynamics) , Metals , Modeling , Physics , Process control , Strength (Materials) , Stress

Effects of Interfacial Geometry on Laser Joining of Dissimilar NiTi to Stainless Steel Wires

Grant B. Brandal, Gen Satoh, Y. Lawrence Yao, Syed Naveed

MSEC 2013; V001T01A057https://doi.org/10.1115/MSEC2013-1204

Abstract

View Articletitled, Effects of Interfacial Geometry on Laser Joining of Dissimilar NiTi to Stainless Steel Wires

PDF

Topics: Geometry , Joining , Lasers , Nickel titanium alloys , Stainless steel , Wire , Tensile strength , Biomedicine , Brittleness , Computer simulation

Characterization of Vacuum Brazing of Ti6Al4V and Alumina With Cu-Ag Brazing Alloy via Substrate-Induced Reactive Mechanism

Ravikumar Beeranur, Kiran K. Waghmare, Ramesh K. Singh

MSEC 2013; V001T01A058https://doi.org/10.1115/MSEC2013-1218

Abstract

View Articletitled, Characterization of Vacuum Brazing of Ti6Al4V and Alumina With Cu-Ag Brazing Alloy via Substrate-Induced Reactive Mechanism

PDF

Topics: Alloys , Brazing , Ceramics , Vacuum

Empirical Modeling of Direct Electric Current Effect on Machining Cutting Force

Elizabeth Jones, Joshua J. Jones, Laine Mears

MSEC 2013; V001T01A059https://doi.org/10.1115/MSEC2013-1229

Abstract

View Articletitled, Empirical Modeling of Direct Electric Current Effect on Machining Cutting Force

PDF

Topics: Cutting , Electric current , Machining , Modeling

Ultrasonic Cavitation Peening of Stainless Steel and Nickel Alloy

Yibo Gao, Benxin Wu, Ze Liu, Yun Zhou

MSEC 2013; V001T01A060https://doi.org/10.1115/MSEC2013-1236

Abstract

View Articletitled, Ultrasonic Cavitation Peening of Stainless Steel and Nickel Alloy

PDF

Topics: Cavitation , Nickel alloys , Shot peening , Stainless steel

Modeling of Focused Ultrasound Propagation in Water Towards a Solid Target and Comparisons to Experimental Observations on Ultrasonic Cavitation

Navid Dabir-Moghaddam, Yibo Gao, Benxin Wu

MSEC 2013; V001T01A061https://doi.org/10.1115/MSEC2013-1246

Abstract

View Articletitled, Modeling of Focused Ultrasound Propagation in Water Towards a Solid Target and Comparisons to Experimental Observations on Ultrasonic Cavitation

PDF

Topics: Cavitation , Modeling , Shot peening , Ultrasound , Water

Leveraging Abrasive Processes

Product-Oriented Sustainability Aspects of Abrasive Processes

Jan C. Aurich, Marina Carrella, Benjamin Kirsch

MSEC 2013; V001T01A062https://doi.org/10.1115/MSEC2013-1186

Abstract

View Articletitled, Product-Oriented Sustainability Aspects of Abrasive Processes

PDF

Topics: Sustainability , Manufacturing , Cycles , Machining

Multi-Constraint Optimization for Grinding Nickel-Based Alloys

Radu Pavel, Xiqun Wang, Anil K. Srivastava

MSEC 2013; V001T01A063https://doi.org/10.1115/MSEC2013-1205

Abstract

View Articletitled, Multi-Constraint Optimization for Grinding Nickel-Based Alloys

PDF

Topics: Alloys , Grinding , Nickel , Optimization , Aerospace industry , Computer numerical control machine tools , Damage , Data acquisition systems , Data collection , Defense industry

Polymer Processing

Requirements for Moving Towards Liquid Molding of Large Composite Structures for Aerospace

Thomas K. Tsotsis

MSEC 2013; V001T01A064https://doi.org/10.1115/MSEC2013-1023

Abstract

View Articletitled, Requirements for Moving Towards Liquid Molding of Large Composite Structures for Aerospace

PDF

Topics: Aerospace industry , Composite materials , Molding , Modeling , Aircraft , Design , Manufacturing , Military systems , Polymers , Quality control

Correlation Between Mechanical Properties in Standard Test Specimens and Injection Molded Thin-Wall Parts

Laurentiu I. Sandu, Felicia Stan, Catalin Fetecau

MSEC 2013; V001T01A065https://doi.org/10.1115/MSEC2013-1032

Abstract

View Articletitled, Correlation Between Mechanical Properties in Standard Test Specimens and Injection Molded Thin-Wall Parts

PDF

Topics: Mechanical properties , Thin wall structures , Temperature , Yield strength , Elastic moduli , Injection molding , Elongation , Experimental design , Packing (Shipments) , Packings (Cushioning)

Corotating or Codeforming Models for Thermoforming: Free Forming

H. M. Baek, A. J. Giacomin

MSEC 2013; V001T01A066https://doi.org/10.1115/MSEC2013-1114

Abstract

View Articletitled, Corotating or Codeforming Models for Thermoforming: Free Forming

PDF

Topics: Deformation , Disks , Nonlinear differential equations , Viscoelasticity

Microcellular Injection Molding of Gas-Laden Pellets Using Nitrogen (N₂) and Carbon Dioxide (CO₂) as Co-Blowing Agents

Xiaofei Sun, Lih-Sheng Turng, Patrick J. Gorton, Pankaj Nigam, Sezen Buell

MSEC 2013; V001T01A067https://doi.org/10.1115/MSEC2013-1158

Abstract

View Articletitled, Microcellular Injection Molding of Gas-Laden Pellets Using Nitrogen (N2) and Carbon Dioxide (CO2) as Co-Blowing Agents

PDF

Topics: Carbon dioxide , Injection molding , Nitrogen , Extruding , Gases , Low density polyethylene

Constant Temperature Embossing of PEEK Films

Ramasubramani Kuduva-Raman-Thanumoorthy, Byung H. Kim, Donggang Yao

MSEC 2013; V001T01A068https://doi.org/10.1115/MSEC2013-1175

Abstract

View Articletitled, Constant Temperature Embossing of PEEK Films

PDF

Topics: Embossing , Temperature , Glass transition , Ethers (Class of compounds) , Polymers , Melting point , Microchannels , Scanning electron microscopy , Silicon

Study of Biobased Shape Memory Polylactic Acid/Thermoplastic Polyurethane (PLA/TPU) Blends

Xin Jing, Hao-Yang Mi, Lih-Sheng Turng, Xiang-Fang Peng

MSEC 2013; V001T01A069https://doi.org/10.1115/MSEC2013-1237

Abstract

View Articletitled, Study of Biobased Shape Memory Polylactic Acid/Thermoplastic Polyurethane (PLA/TPU) Blends

PDF

Topics: Shape memory polymers , Shapes , Urethane elastomers

Synthesis and Characterization of High Performance Polymer Nanocomposite Using Carbon Nanotubes as Fillers

N. Thangapandian, S. Balasivanandha Prabu, R. Paskaramoorthy

MSEC 2013; V001T01A070https://doi.org/10.1115/MSEC2013-1251

Abstract

View Articletitled, Synthesis and Characterization of High Performance Polymer Nanocomposite Using Carbon Nanotubes as Fillers

PDF

Topics: Carbon nanotubes , Fillers (Materials) , Polymer nanocomposites , Epoxy adhesives , Epoxy resins , Multi-walled carbon nanotubes , Chemical vapor deposition , Bending strength , Carbon , Catalysts

Prediction of Mechanical Properties of Microcellular Plastics Using the Variational Asymptotic Method for Unit Cell Homogenization (VAMUCH) Method

Emily Yu, Lih-Sheng Turng

MSEC 2013; V001T01A071https://doi.org/10.1115/MSEC2013-1254

Abstract

View Articletitled, Prediction of Mechanical Properties of Microcellular Plastics Using the Variational Asymptotic Method for Unit Cell Homogenization (VAMUCH) Method

PDF

Topics: Mechanical properties , Plastics , Injection molded plastics , Brittleness , Ductility , Elasticity , Finite element analysis , Porous materials , Reliability , Urethane elastomers

Thermally Assisted Manufacturing

Application of Laser in Joining Aluminum Foam Hybrid Materials

Alessandro Ascari, Giampaolo Campana

MSEC 2013; V001T01A072https://doi.org/10.1115/MSEC2013-1057

Abstract

View Articletitled, Application of Laser in Joining Aluminum Foam Hybrid Materials

PDF

Topics: Aluminum , Joining , Lasers , Density , Heating , Radiation (Physics) , Skin , Stainless steel , Welding

Characterization of Flow Stress for Commercially Pure Titanium Subjected to Electrically-Assisted Deformation

James Magargee, Fabrice Morestin, Jian Cao

MSEC 2013; V001T01A073https://doi.org/10.1115/MSEC2013-1069

Abstract

View Articletitled, Characterization of Flow Stress for Commercially Pure Titanium Subjected to Electrically-Assisted Deformation

PDF

Topics: Deformation , Flow (Dynamics) , Stress , Titanium , Temperature , Tension , Compression , Constitutive equations , Heating , Joules

Modelling of Thin-Film Single and Multi-Layer Nanosecond Pulsed Laser Processing

Adrian H. A. Lutey

MSEC 2013; V001T01A074https://doi.org/10.1115/MSEC2013-1093

Abstract

View Articletitled, Modelling of Thin-Film Single and Multi-Layer Nanosecond Pulsed Laser Processing

PDF

Topics: Lasers , Modeling , Thin films , Ablation (Vaporization technology) , Aluminum , Heat , Explosions , Flow (Dynamics) , Heating , Absorption

A Comprehensive Model for Laser Hardening of Carbon Steels

Alessandro Fortunato, Alessandro Ascari, Erica Liverani, Leonardo Orazi, Gabriele Cuccolini

MSEC 2013; V001T01A075https://doi.org/10.1115/MSEC2013-1094

Abstract

View Articletitled, A Comprehensive Model for Laser Hardening of Carbon Steels

PDF

Topics: Carbon steel , Laser hardening , Constants (Physics) , Hardening , Laser beams , Lasers , Manufacturing , Simulation , Steel , Tradeoffs

Ablation Dynamics of Silicon by Femtosecond Laser and the Role of Early Plasma

Xin Zhao, Yung C. Shin

MSEC 2013; V001T01A076https://doi.org/10.1115/MSEC2013-1107

Abstract

View Articletitled, Ablation Dynamics of Silicon by Femtosecond Laser and the Role of Early Plasma

PDF

Topics: Ablation (Vaporization technology) , Dynamics (Mechanics) , Lasers , Plasmas (Ionized gases) , Silicon , Fluence (Radiation measurement) , Absorption , Electrons , Laser ablation , Laser beams

Investigation and Optimization of Laser Welding of Ti-6Al-4V Titanium Alloy Plates

Fabrizia Caiazzo, Vittorio Alfieri, Gaetano Corrado, Francesco Cardaropoli, Vincenzo Sergi

MSEC 2013; V001T01A077https://doi.org/10.1115/MSEC2013-1134

Abstract

View Articletitled, Investigation and Optimization of Laser Welding of Ti-6Al-4V Titanium Alloy Plates

PDF

Topics: Laser welding , Optimization , Plates (structures) , Titanium alloys , Welding , Aerospace industry , Alloys , Biomedicine , Butt welding , Corrosion resistance