Volumes | International Manufacturing Science and Engineering Conference | American Society of Mechanical Engineers Digital Collection

Topics: Sheet metal work , Stainless steel , Simulation , Aircraft engines , Design , Finite element analysis , Geometry , Manufacturing , Materials properties , Shapes

Investigation on Sheet Hydroforming Process of Titanium/Aluminum Clad Metal Housing

Huang-Chi Tseng, Zong-Chun Wu, Chinghua Hung, Ming-Hu Lee

MSEC 2010; 23-30https://doi.org/10.1115/MSEC2010-34047

Abstract

View Articletitled, Investigation on Sheet Hydroforming Process of Titanium/Aluminum Clad Metal Housing

PDF

Topics: Aluminum , Finite element analysis , Metals , Shapes , Simulation , Titanium , Blanks , Deformation , Dimensions , Finite element methods

Identification for Control of Low Pressure Die Casting

XinMei Shi, Daan M. Maijer, Guy Dumont

MSEC 2010; 31-40https://doi.org/10.1115/MSEC2010-34063

Abstract

View Articletitled, Identification for Control of Low Pressure Die Casting

PDF

Topics: Die casting (Process) , Die castings (Product) , Pressure , Casting , Design , Heat transfer , Control equipment , Cycles , Finite element analysis , Porosity

Virtual 3D Model Simulation for Design and Implementation of Automated Processes

Richard Y. Chiou, Yongjin James Kwon, Sang C. Park, Robin Kizirian, Yueh-Ting Yang, Matthew R. Dordai

MSEC 2010; 41-49https://doi.org/10.1115/MSEC2010-34089

Abstract

View Articletitled, Virtual 3D Model Simulation for Design and Implementation of Automated Processes

PDF

Topics: Design , Simulation , Three-dimensional models , Manufacturing , Manufacturing systems , Computer software , Programmable controllers , Robots , Visualization

Predicting the Effect of Vibration on Machining Distortion in High-Speed Milling Aerospace Monolithic Components

Q. H. Song, X. Ai, Z. Q. Liu

MSEC 2010; 51-55https://doi.org/10.1115/MSEC2010-34091

Abstract

View Articletitled, Predicting the Effect of Vibration on Machining Distortion in High-Speed Milling Aerospace Monolithic Components

PDF

Topics: Aerospace industry , Chatter , Machining , Milling , Vibration

Effects of Container Geometry on Energy Consumption During Hardening in Ice Cream Manufacturing

W. C. Cromer, Mark J. Miller, X. J. Xin, Z. J. Pei, Karen A. Schmidt

MSEC 2010; 57-62https://doi.org/10.1115/MSEC2010-34103

Abstract

View Articletitled, Effects of Container Geometry on Energy Consumption During Hardening in Ice Cream Manufacturing

PDF

Topics: Containers , Energy consumption , Geometry , Hardening , Ice , Manufacturing , Food products , Finite element methods , Boundary-value problems , Cooling

Effects of Air Flow, Draw Temperature and Boundary Conditions on Hardening in Ice Cream Manufacturing

N. L. Rauth, Mark J. Miller, X. Jack Xin, Z. J. Pei, Karen A. Schmidt

MSEC 2010; 63-70https://doi.org/10.1115/MSEC2010-34104

Abstract

View Articletitled, Effects of Air Flow, Draw Temperature and Boundary Conditions on Hardening in Ice Cream Manufacturing

PDF

Topics: Air flow , Boundary-value problems , Hardening , Ice , Manufacturing , Temperature , Finite element methods , Food products , Convection , Cooling

Study on the Influence of Different Tool Edge Radius on Milling Ti6Al4V

Yueping Liu, Jianfeng Li, Jie Sun, Feng Jiang

MSEC 2010; 71-76https://doi.org/10.1115/MSEC2010-34118

Abstract

View Articletitled, Study on the Influence of Different Tool Edge Radius on Milling Ti6Al4V

PDF

Topics: Computer software , Cutting , Finite element model , Heat , Machining , Milling , Temperature

Experimental Investigation of Interactions Between Abrasive Tool and Workpiece in Honing

Q. Feng, C. Z. Ren, Y. Zhao, Z. J. Pei

MSEC 2010; 77-81https://doi.org/10.1115/MSEC2010-34122

Abstract

View Articletitled, Experimental Investigation of Interactions Between Abrasive Tool and Workpiece in Honing

PDF

Topics: Abrasive machining , Grain size , Pressure , Steel , Tribology

Simulation of Facing Processes of Profiles With Hexagon Cross Section

Rainer Britz, Heinz Ulbrich

MSEC 2010; 83-90https://doi.org/10.1115/MSEC2010-34137

Abstract

View Articletitled, Simulation of Facing Processes of Profiles With Hexagon Cross Section

PDF

Topics: Chisels , Cutting , Machine tools , Machinery , Modeling , Simulation

Thermal Modeling of Workpiece Temperature in MQL Deep-Hole Drilling

Bruce L. Tai, David A. Stephenson, Albert J. Shih

MSEC 2010; 91-97https://doi.org/10.1115/MSEC2010-34141

Abstract

View Articletitled, Thermal Modeling of Workpiece Temperature in MQL Deep-Hole Drilling

PDF

Topics: Drilling , Modeling , Temperature , Heat , Temperature distribution , Drills (Tools) , Finite element analysis , Heat transfer , Iron , Lubrication

Forming Force Prediction in Two Point Incremental Forming Using Backpropagation Neural Networks in Combination With Genetic Algorithms

M. Luisa Garcia-Romeu, Elisabetta Ceretti, Antonio Fiorentino, Claudio Giardini

MSEC 2010; 99-106https://doi.org/10.1115/MSEC2010-34142

Abstract

View Articletitled, Forming Force Prediction in Two Point Incremental Forming Using Backpropagation Neural Networks in Combination With Genetic Algorithms

PDF

Topics: Artificial neural networks , Genetic algorithms

Simulation of the Heat Treatment of an Automotive Cast Part

Patrice Lasne, Mickael Barbelet, Olivier Jaouen, Frederic Costes, Ihab Ragai, Harry Tempelman

MSEC 2010; 107-112https://doi.org/10.1115/MSEC2010-34152

Abstract

View Articletitled, Simulation of the Heat Treatment of an Automotive Cast Part

PDF

Topics: Heat treating (Metalworking) , Simulation , Casting , Cooling , Quenching (Metalworking) , Computer software , Porosity , Water , Grain size , Metals

Using an Airy Function to Predict Stresses in Wound Metal Strip Having Asymmetric Thickness Profile

Jantzen L. Hinton, Paul A. Gross, Ramana V. Grandhi, Arif S. Malik

MSEC 2010; 113-120https://doi.org/10.1115/MSEC2010-34162

Abstract

View Articletitled, Using an Airy Function to Predict Stresses in Wound Metal Strip Having Asymmetric Thickness Profile

PDF

Topics: Stress , Strip metal , Wedges , Winding (process)

Sensitivity of Steady State Intermittent Cutting Motion to Work-Piece Characteristics

Brandon C. Gegg, Steve S. Suh

MSEC 2010; 121-129https://doi.org/10.1115/MSEC2010-34186

Abstract

View Articletitled, Sensitivity of Steady State Intermittent Cutting Motion to Work-Piece Characteristics

PDF

Topics: Cutting , Steady state , Dynamic systems , Friction , Machine tools

Process Control Model for Tube Hydroforming

Obadiah Kilonzo

MSEC 2010; 131-139https://doi.org/10.1115/MSEC2010-34200

Abstract

View Articletitled, Process Control Model for Tube Hydroforming

PDF

Topics: Process control , Cylinders , Machinery , Control equipment , Design , Engineering prototypes , Algorithms , Databases , Dynamic response , Feedback

Four Empirical Models for Pelleting of Cellulosic Biomass

Na Qin, Z. J. Pei

MSEC 2010; 141-148https://doi.org/10.1115/MSEC2010-34201

Abstract

View Articletitled, Four Empirical Models for Pelleting of Cellulosic Biomass

PDF

Topics: Biofuel , Biomass

Utilizing Recurrence Quantification Analysis for Chatter Detection in Turning

Vazhayil Govindan Rajesh, V. N. Narayanan Namboothiri

MSEC 2010; 149-156https://doi.org/10.1115/MSEC2010-34222

Abstract

View Articletitled, Utilizing Recurrence Quantification Analysis for Chatter Detection in Turning

PDF

Topics: Chatter , Turning , Cutting , Dynamics (Mechanics) , Nonlinear dynamical systems , Phase space , Trajectories (Physics)

Dimension Error in the Presence of Process and Machine Error in End Milling

H. N. Chiang, J. J. Wang, F. C. Hsu, Y. J. Li

MSEC 2010; 157-162https://doi.org/10.1115/MSEC2010-34229

Abstract

View Articletitled, Dimension Error in the Presence of Process and Machine Error in End Milling

PDF

Topics: Dimensions , Errors , Machinery , Milling , Cutting , Coordinate measuring machines , Displacement , Fluids , Lasers , Machine tools

A Variable Search Technique for Multiple Control Valves Used in Melt Modulation During Injection Molding

John P. Coulter, Akapot Tantrapiwat

MSEC 2010; 163-168https://doi.org/10.1115/MSEC2010-34238

Abstract

View Articletitled, A Variable Search Technique for Multiple Control Valves Used in Melt Modulation During Injection Molding

PDF

Topics: Injection molding , Valves , Cavities , Computer software , Three-dimensional models

Simulation of Diamond Disc Conditioning in Chemical Mechanical Polishing: Effects of Conditioning Parameters on Pad Surface Shape

Emmanuel A. Baisie, Z. C. Li, X. H. Zhang

MSEC 2010; 169-177https://doi.org/10.1115/MSEC2010-34264

Abstract

View Articletitled, Simulation of Diamond Disc Conditioning in Chemical Mechanical Polishing: Effects of Conditioning Parameters on Pad Surface Shape

PDF

Topics: Diamonds , Disks , Polishing , Shapes , Simulation

Case Studies of Diamond-Coated Tool Cutting Simulations: Coating Thickness and Cutting Speed Effects

Feng Qin, Y. Kevin Chou

MSEC 2010; 179-185https://doi.org/10.1115/MSEC2010-34306

Abstract

View Articletitled, Case Studies of Diamond-Coated Tool Cutting Simulations: Coating Thickness and Cutting Speed Effects

PDF

Topics: Coating processes , Coatings , Cutting , Diamonds , Engineering simulation , Simulation , Stress , Temperature , Machining , Cutting tools

A 3D Finite Element Study on Material Flow Under the Cutting Edge in Hard Milling

H. M. Singh, Y. B. Guo

MSEC 2010; 187-192https://doi.org/10.1115/MSEC2010-34309

Abstract

View Articletitled, A 3D Finite Element Study on Material Flow Under the Cutting Edge in Hard Milling

PDF

Topics: Cutting , Finite element analysis , Flow (Dynamics) , Milling

Cutting Force Modeling When Milling Nickel-Base Superalloys

Andrew J. Henderson, Cristina Bunget, Thomas R. Kurfess

MSEC 2010; 193-202https://doi.org/10.1115/MSEC2010-34325

Abstract

View Articletitled, Cutting Force Modeling When Milling Nickel-Base Superalloys

PDF

Topics: Cutting , Milling , Modeling , Nickel , Superalloys

Laser Based Manufacturing

Nanosecond Laser Ablation of Titanium in Air and Water: The Time-Resolved Observation and Post-Process Characterizations

Yun Zhou, Yibo Gao, Benxin Wu

MSEC 2010; 203-207https://doi.org/10.1115/MSEC2010-34109

Abstract

View Articletitled, Nanosecond Laser Ablation of Titanium in Air and Water: The Time-Resolved Observation and Post-Process Characterizations

PDF

Topics: Laser ablation , Titanium , Water , Aerospace industry , Biomedicine , Lasers , Machining , Micromachining , Plasmas (Ionized gases) , Wear

Nanosecond Laser Ablation of Silicon Carbide at Infrared Wavelength

Yibo Gao, Yun Zhou, Benxin Wu

MSEC 2010; 209-213https://doi.org/10.1115/MSEC2010-34110

Abstract

View Articletitled, Nanosecond Laser Ablation of Silicon Carbide at Infrared Wavelength

PDF

Topics: Laser ablation , Silicon , Wavelength , Lasers , Ablation (Vaporization technology) , Brittleness , Electrical discharge machining , Electronics , Insulation , Machining

Laser Beam Propagation Through Three-Dimensional High-Aspect-Ratio Microholes

Sha Tao, Benxin Wu, Shuting Lei

MSEC 2010; 215-219https://doi.org/10.1115/MSEC2010-34111

Abstract

View Articletitled, Laser Beam Propagation Through Three-Dimensional High-Aspect-Ratio Microholes

PDF

Topics: Laser beams , Aerospace industry , Drilling , Electrical discharge machining , Electronics , Laser ablation , Machining , Transients (Dynamics) , Wave equations , Waveguides

Finite Element Analysis of the Effect of Overlapping Impacts of Laser Shock Peening Within Annealed AISI 1053 Steel

Rohit Voothaluru, C. Richard Liu

MSEC 2010; 221-228https://doi.org/10.1115/MSEC2010-34164

Abstract

View Articletitled, Finite Element Analysis of the Effect of Overlapping Impacts of Laser Shock Peening Within Annealed AISI 1053 Steel

PDF

Topics: Finite element analysis , Laser hardening , Steel , Deformation , Lasers , Residual stresses , Shock (Mechanics) , Finite element methods , Stress , Fatigue

Investigation on Porosity Formation in AA6082 Hybrid Laser-GMAW Welding

Alessandro Ascari, Alessandro Fortunato, Leonardo Orazi, Giampaolo Campana, Giovanni Tani

MSEC 2010; 229-236https://doi.org/10.1115/MSEC2010-34247

Abstract

View Articletitled, Investigation on Porosity Formation in AA6082 Hybrid Laser-GMAW Welding

PDF

Topics: Gas metal arc welding , Lasers , Porosity , Welding , Bubbles , Computer software , Inspection , Plates (structures) , X-rays

Characterization and Prediction of Texture in Laser Annealed NiTi Shape Memory Thin Films

Gen Satoh, Y. Lawrence Yao, Xu Huang, Ainissa Ramirez

MSEC 2010; 237-246https://doi.org/10.1115/MSEC2010-34250

Abstract

View Articletitled, Characterization and Prediction of Texture in Laser Annealed NiTi Shape Memory Thin Films

PDF

Topics: Lasers , Nickel titanium alloys , Shape memory thin films , Texture (Materials) , Crystallization , Shape memory properties , Anisotropy , Biocompatibility , Corrosion resistance , Electron backscatter diffraction

Investigation of Fluid Flow and Heat Transfer in 3D Dual-Beam Laser Keyhole Welding

Jun Zhou, Hai-Lung Tsai

MSEC 2010; 247-254https://doi.org/10.1115/MSEC2010-34252

Abstract

View Articletitled, Investigation of Fluid Flow and Heat Transfer in 3D Dual-Beam Laser Keyhole Welding

PDF

Topics: Fluid dynamics , Heat transfer , Lasers , Welding , Flow (Dynamics) , Laser welding , Shapes , Cooling , Dynamics (Mechanics) , Errors

Femtosecond Laser-Induced Surface Texturing and Crystallization of a-Si:H Thin Film

Hongliang Wang, Panjawat Kongsuwan, Gen Satoh, Y. Lawrence Yao

MSEC 2010; 255-264https://doi.org/10.1115/MSEC2010-34271

Abstract

View Articletitled, Femtosecond Laser-Induced Surface Texturing and Crystallization of a-Si:H Thin Film

PDF

Topics: Crystallization , Lasers , Thin films , Stability , Silicon , Solar cells , Geometry , Light absorption , Spectra (Spectroscopy) , Water

Formability of Open-Cell Aluminum Foams by Laser

Loredana Santo, Alessandro Guglielmotti, Fabrizio Quadrini

MSEC 2010; 265-272https://doi.org/10.1115/MSEC2010-34282

Abstract

View Articletitled, Formability of Open-Cell Aluminum Foams by Laser

PDF

Topics: Aluminum , Foams (Chemistry) , Lasers

Improving Biocompatibily of Laser Micromachined Silicon Wafer by Surface Coating With Poly(Ethylene Glycol) Diacrylate and Diamond-Like Carbon for Biomedical Devices

Plawut Wongwiwat, Roger J. Narayan, Yuan-Shin Lee

MSEC 2010; 273-280https://doi.org/10.1115/MSEC2010-34283

Abstract

View Articletitled, Improving Biocompatibily of Laser Micromachined Silicon Wafer by Surface Coating With Poly(Ethylene Glycol) Diacrylate and Diamond-Like Carbon for Biomedical Devices

PDF

Topics: Biomedicine , Carbon , Coating processes , Coatings , Diamonds , Lasers , Medical devices , Micromachining , Semiconductor wafers

Laser Coating of HAp/Ti Nanoparticles on Metal Implants: Interfacial Bonding Strength, Chemical Analysis and Biocompatibility

Martin Y. Zhang, Gary J. Cheng

MSEC 2010; 281-289https://doi.org/10.1115/MSEC2010-34295

Abstract

View Articletitled, Laser Coating of HAp/Ti Nanoparticles on Metal Implants: Interfacial Bonding Strength, Chemical Analysis and Biocompatibility

PDF

Topics: Biocompatibility , Bonding , Coating processes , Lasers , Metals , Nanoparticles , Titanium

Nucleation of Highly Dense Nanoscale Precipitates Based on an Innovative Process: Warm Laser Shock Peening

Yiliang Liao, Chang Ye, Gary J. Cheng

MSEC 2010; 291-298https://doi.org/10.1115/MSEC2010-34297

Abstract

View Articletitled, Nucleation of Highly Dense Nanoscale Precipitates Based on an Innovative Process: Warm Laser Shock Peening

PDF

Topics: Laser hardening , Nanoscale phenomena , Nucleation (Physics) , Temperature , Density , Dislocations , Aluminum alloys , Deformation , Dislocation density , Modeling

Effect of Multiple Pulses on the Deformation Behavior of Ultrathin Metal Foils in 3D Micro-Scale Laser Dynamic Forming

Ji Li, Gary J. Cheng

MSEC 2010; 299-306https://doi.org/10.1115/MSEC2010-34299

Abstract

View Articletitled, Effect of Multiple Pulses on the Deformation Behavior of Ultrathin Metal Foils in 3D Micro-Scale Laser Dynamic Forming

PDF

Topics: Deformation , Fracture (Materials) , Fracture (Process) , Lasers , Metal foil , Microscale devices

A Dislocation Dynamics Based Constitutive Model and Experimental Validations by 3D Microscale Laser Dynamic Forming of Metallic Thin Films

Huang Gao, Gary J. Cheng

MSEC 2010; 307-315https://doi.org/10.1115/MSEC2010-34300

Abstract

View Articletitled, A Dislocation Dynamics Based Constitutive Model and Experimental Validations by 3D Microscale Laser Dynamic Forming of Metallic Thin Films

PDF

Topics: Constitutive equations , Dislocations , Dynamics (Mechanics) , Lasers , Metallic thin films , Microscale devices , Deformation , Simulation , Shock waves , Stress

Fatigue Performance Improvement by Dynamic Strain Aging and Dynamic Precipitation in Warm Laser Shock Peening of AISI 4140 Steel

Chang Ye, Gary J. Cheng

MSEC 2010; 317-325https://doi.org/10.1115/MSEC2010-34301

Abstract

View Articletitled, Fatigue Performance Improvement by Dynamic Strain Aging and Dynamic Precipitation in Warm Laser Shock Peening of AISI 4140 Steel

PDF

Topics: Fatigue , Laser hardening , Precipitation , Steel , Dislocations , Stability , Fatigue life , Nanoscale phenomena , Stress , Density

Advances in Micro/Meso Mechanical Manufacturing

Deformation Size Effects Due to Specimen and Grain Size in Microbending

Sunal Ahmet Parasız, Reid VanBenthysen, Brad L. Kinsey

MSEC 2010; 327-336https://doi.org/10.1115/MSEC2010-34038

Abstract

View Articletitled, Deformation Size Effects Due to Specimen and Grain Size in Microbending

PDF

Topics: Deformation , Grain size , Microhardness , Microscale devices , Sheet metal work

Ultrahigh Speed Micromachining

Said Jahanmir

MSEC 2010; 337-344https://doi.org/10.1115/MSEC2010-34174

Abstract

View Articletitled, Ultrahigh Speed Micromachining

PDF

Topics: Micromachining , Machining , Aluminum alloys , Ceramics , Damage , Micromilling , Ball bearings , Cutting , Diamond tools , Diamonds

Development of a Small 5-Axis Micro-Milling Center for Parts Up to 100 mm in Diameter

A. Honegger, A. Tulsian, E. Creighton, A. Phillip, D. Mukhopadhyay

MSEC 2010; 345-353https://doi.org/10.1115/MSEC2010-34221

Abstract

View Articletitled, Development of a Small 5-Axis Micro-Milling Center for Parts Up to 100 mm in Diameter

PDF

Topics: Conveyor systems , Machine tools , Machinery , Machining , Micromachining , Micromilling , Robots

Development of an Axisymmetric Pressure Application Method for Cylindrical Laminated Device Fabrication

James H. Vlieg, Brian K. Paul, Richard B. Peterson

MSEC 2010; 355-362https://doi.org/10.1115/MSEC2010-34227

Abstract

View Articletitled, Development of an Axisymmetric Pressure Application Method for Cylindrical Laminated Device Fabrication

PDF

Topics: Manufacturing , Pressure , Bonding , Microchannels , Blood , Cycles , Design , Diffusion bonding (Metals) , Engines , Finite element analysis

Laser Induced Plasma Micro-Machining

Kumar Pallav, Kornel F. Ehmann

MSEC 2010; 363-369https://doi.org/10.1115/MSEC2010-34242

Abstract

View Articletitled, Laser Induced Plasma Micro-Machining

PDF

Topics: Lasers , Micromachining , Plasmas (Ionized gases) , Electrical discharge machining , Wear , Electrodes , Explosives , Laser beams

Experimental Investigation of Micro-Milling Accuracy Using On-Machine Measurement System

Xinyu Liu

MSEC 2010; 371-379https://doi.org/10.1115/MSEC2010-34245

Abstract

View Articletitled, Experimental Investigation of Micro-Milling Accuracy Using On-Machine Measurement System

PDF

Topics: Machinery , Measurement systems , Micromilling , Errors , Machining , Dimensions , Engineering simulation , Lasers , Manufacturing , Sensors

An Investigation Into Fixture Error Compensation in Micromilling Using Tool-Based Conductive Touch-Off

Jacob A. Kunz, Angela Sodemann, J. Rhett Mayor

MSEC 2010; 381-389https://doi.org/10.1115/MSEC2010-34273

Abstract

View Articletitled, An Investigation Into Fixture Error Compensation in Micromilling Using Tool-Based Conductive Touch-Off

PDF

Topics: Error compensation , Micromilling , Errors , Stress , Milling , Fixturing , Machining , Kinematics , Linkages , Robotics

Machinability Study of SiC Nano-Particles Reinforced Magnesium Nanocomposites During Micro-Milling Processes

Juan Li, Jian Liu, Chengying Xu

MSEC 2010; 391-398https://doi.org/10.1115/MSEC2010-34294

Abstract

View Articletitled, Machinability Study of SiC Nano-Particles Reinforced Magnesium Nanocomposites During Micro-Milling Processes

PDF

Topics: Composite materials , Machinability , Magnesium (Metal) , Micromilling , Nanocomposites , Nanoparticles

Fabrication Process of Nanomaterials and Nanodevices

Fabrication of Al6061-CNT Composite by Mechanical Alloying Followed by Semi-Solid Powder Processing

Yufeng Wu, Gap-Yong Kim

MSEC 2010; 399-403https://doi.org/10.1115/MSEC2010-34074

Abstract

View Articletitled, Fabrication of Al6061-CNT Composite by Mechanical Alloying Followed by Semi-Solid Powder Processing

PDF

Topics: Carbon nanotubes , Composite materials , Manufacturing , Aluminum , Carbon , Metals , Nanotubes , Particulate matter , Thermal properties

AFM-Based Nanomachining for Nano-Fabrication Processes: MD Simulation and AFM Experimental Verification

Rapeepan Promyoo, Hazim El-Mounayri, Ashlie Martini

MSEC 2010; 405-414https://doi.org/10.1115/MSEC2010-34115

Abstract

View Articletitled, AFM-Based Nanomachining for Nano-Fabrication Processes: MD Simulation and AFM Experimental Verification

PDF

Topics: Atomic force microscopy , Molecular dynamics , Molecular dynamics simulation , Nanofabrication , Nanoindentation , Friction , Nanoscale phenomena , Atoms , Deformation , Geometry

Layer-by-Layer Nanoassembly of CIS Nanoparticles

Mangilal Agarwal, Sudhir Shrestha, Parvin Ghane, Kody Varahramyan

MSEC 2010; 415-418https://doi.org/10.1115/MSEC2010-34157

Abstract

View Articletitled, Layer-by-Layer Nanoassembly of CIS Nanoparticles

PDF

Topics: Nanoparticles , Coatings , Composite materials , Construction , Copper , Energy gap , Manufacturing , Nanomaterials , Nanoscale phenomena , Quartz crystals

Rationalizing the Fabrication Conditions for Nanoporous Gold

Shruti M. Baharani, Yong X. Gan

MSEC 2010; 419-423https://doi.org/10.1115/MSEC2010-34226

Abstract

View Articletitled, Rationalizing the Fabrication Conditions for Nanoporous Gold

PDF

Topics: Alloys , Computer software , Design , Electrodes , Electrolytes , Etching , Fuel cells , Heat treating (Metalworking) , Manufacturing , Sensors

Fabrication and Characterization of Bulk Nanocrystalline Layer on Steel Components With Different Microstructures by Air Blast Shot Peening

R. Waikar, Y. B. Guo

MSEC 2010; 425-432https://doi.org/10.1115/MSEC2010-34311

Abstract

View Articletitled, Fabrication and Characterization of Bulk Nanocrystalline Layer on Steel Components With Different Microstructures by Air Blast Shot Peening

PDF

Topics: Manufacturing , Shot peening , Steel , Grain size , Microhardness , Surface roughness , Alloys , Bulk solids , Carbon steel , Nanomanufacturing

Sustainable Nanomanufacturing

Fabrication of Nickel/Zirconium Anode for Solid Oxide Fuel Cells by Electrochemical Method

Surya V. Pothula, Yong X. Gan

MSEC 2010; 433-437https://doi.org/10.1115/MSEC2010-34225

Abstract

View Articletitled, Fabrication of Nickel/Zirconium Anode for Solid Oxide Fuel Cells by Electrochemical Method

PDF

Topics: Anodes , Manufacturing , Nickel , Solid oxide fuel cells , Zirconium , Alloys , Copper , Etching , Electrodeposition , Metals

Addressing Uncertainty in the Environmental Analysis of Nickel Nanoparticle Production

Malcolm O. Brown, Karl R. Haapala, Brian K. Paul, Richard D. Glover, James E. Hutchison

MSEC 2010; 439-446https://doi.org/10.1115/MSEC2010-34251

Abstract

View Articletitled, Addressing Uncertainty in the Environmental Analysis of Nickel Nanoparticle Production

PDF

Topics: Life cycle assessment , Nanomanufacturing , Nanoparticles , Nickel , Uncertainty , Engineering systems and industry applications , Nanotechnology , Sensitivity analysis , Sustainability , Transparency

Three-Dimensional Simulation of Cross-Flow Microfilter Fouling in Tortuous Pore Profiles With Semi-Synthetic Metalworking Fluids

Bingyi Yu, Shiv G. Kapoor, Richard E. DeVor

MSEC 2010; 447-457https://doi.org/10.1115/MSEC2010-34269

Abstract

View Articletitled, Three-Dimensional Simulation of Cross-Flow Microfilter Fouling in Tortuous Pore Profiles With Semi-Synthetic Metalworking Fluids

PDF

Topics: Cross-flow , Fluids , Metalworking , Simulation

Advances in Pervasive Sensing and Computing for Manufacturing Systems

Spatial Blending Functions for Improved Estimation of Contact Pressure Distribution at the Tool-Workpiece Interface

Sripati Sah, Robert X. Gao, Timothy Kurp

MSEC 2010; 459-466https://doi.org/10.1115/MSEC2010-34107

Abstract

View Articletitled, Spatial Blending Functions for Improved Estimation of Contact Pressure Distribution at the Tool-Workpiece Interface

PDF

Topics: Pressure , Metal stamping , Sensors , Tooling , Finite element analysis , Engineering simulation , Interpolation , Modeling , Process monitoring , Product quality

Wireless Acquisition of Temperature Data From PCBN Embedded Thin Film Sensors

Anshuman Guha, Dirk Werschmoeller, Xiaochun Li

MSEC 2010; 467-471https://doi.org/10.1115/MSEC2010-34177

Abstract

View Articletitled, Wireless Acquisition of Temperature Data From PCBN Embedded Thin Film Sensors

PDF

Topics: Boron , Circuits , Computer numerical control machine tools , Cutting , Cutting tools , Data acquisition systems , Dimensions , Heat , Lasers , Machining

Transmissibility of 802.15.1 - Compliant Radio in Machining Enclosures in Industrial Environments

Richard Sowles, Derek Suen, David Loker, John T. Roth

MSEC 2010; 473-481https://doi.org/10.1115/MSEC2010-34192

Abstract

View Articletitled, Transmissibility of 802.15.1 - Compliant Radio in Machining Enclosures in Industrial Environments

PDF

Topics: Machining , Signals , Errors , Sensors , Spectrum analyzers , Computer numerical control machine tools , Emissions , Failure , Machine shops , Radio equipment

Data Driven Manufacturing

Reproduction of Lustrous Object and Cutter Location Using the Normal Vector Generated by Photometric Stereo Method

Seishi Nakamura, Toshiki Hirogaki, Eiichi Aoyama, Hiromichi Nobe

MSEC 2010; 483-489https://doi.org/10.1115/MSEC2010-34124

Abstract

View Articletitled, Reproduction of Lustrous Object and Cutter Location Using the Normal Vector Generated by Photometric Stereo Method

PDF

Topics: Computer-aided design , Cutting , Errors , Filters , Milling , Photography , Shapes , Wood products

Cutting Condition Decision Methodology Based on Data-Mining of Tool Catalog Data

Hiroyuki Kodama, Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa

MSEC 2010; 491-499https://doi.org/10.1115/MSEC2010-34199

Abstract

View Articletitled, Cutting Condition Decision Methodology Based on Data-Mining of Tool Catalog Data

PDF

Topics: Cutting , Data mining , Shapes , Dimensions , Machining , Regression analysis , Surface roughness

Transient Analysis of Downtime Event in Manufacturing Systems

Qing Chang, Jianbo Liu, Stephan Biller, Guoxian Xiao

MSEC 2010; 501-511https://doi.org/10.1115/MSEC2010-34254

Abstract

View Articletitled, Transient Analysis of Downtime Event in Manufacturing Systems

PDF

Topics: Downtime , Maintenance , Manufacturing systems , Transient analysis , Dynamics (Mechanics) , Manufacturing industry , Mathematical analysis , Polishing equipment , Production control , Theorems (Mathematics)

Challenges in Adaptive Manufacturing Planning and Control

A Statistic Review of Computer-Aided Process Planning Research

Jin Mao, Xun Xu, Lihui Wang, Stephen Newman

MSEC 2010; 513-531https://doi.org/10.1115/MSEC2010-34022

Abstract

View Articletitled, A Statistic Review of Computer-Aided Process Planning Research

PDF

Topics: Computer-aided engineering , Production planning , Databases , Gages , Machining

Smart Machining Simulation Based on High-Level Data

Aini Zuhra Abdul Kadir, Xun Xu

MSEC 2010; 533-542https://doi.org/10.1115/MSEC2010-34037

Abstract

View Articletitled, Smart Machining Simulation Based on High-Level Data

PDF

Topics: Machine tools , Machining , Simulation

An Integrated Approach to Spot Welding Sequence Planning and Optimization

Mohammad Givehchi, Amos Ng, Lihui Wang

MSEC 2010; 543-551https://doi.org/10.1115/MSEC2010-34049

Abstract

View Articletitled, An Integrated Approach to Spot Welding Sequence Planning and Optimization

PDF

Topics: Manufacturing , Optimization , Welding

Autonomous Distributed AGV System Based on Taxi Transportation Strategy: Effect of Multiple-Load AGVs on Conveyance Efficiency

Takahiro Kono, Keiji Ogawa, Toshiki Hirogaki, Eiichi Aoyama

MSEC 2010; 553-560https://doi.org/10.1115/MSEC2010-34088

Abstract

View Articletitled, Autonomous Distributed AGV System Based on Taxi Transportation Strategy: Effect of Multiple-Load AGVs on Conveyance Efficiency

PDF

Topics: Automated guided vehicles , Stress , Transportation systems , Manufacturing systems , Decision making , Manufacturing , Flexible manufacturing systems , Buses , Energy consumption , Flow (Dynamics)

Development of Multiple Melt Modulation Valves for Enhanced Injection Molding

Akapot Tantrapiwat, John P. Coulter

MSEC 2010; 561-566https://doi.org/10.1115/MSEC2010-34236

Abstract

View Articletitled, Development of Multiple Melt Modulation Valves for Enhanced Injection Molding

PDF

Topics: Injection molding , Valves , Flow (Dynamics) , Geometry , Molding , Performance

Advances in Biomanufacturing

Study of Double-Layered Microcapsule Formation in Compound Nozzle Jetting

Wei Wang, C. Leigh Herran, Nicole Coutris, Yong Huang, Vladimir Mironov, Roger Markwald

MSEC 2010; 567-576https://doi.org/10.1115/MSEC2010-34127

Abstract

View Articletitled, Study of Double-Layered Microcapsule Formation in Compound Nozzle Jetting

PDF

Topics: Indium compounds , Nozzles , Computational fluid dynamics , Shells , Biological cells , Computer simulation , Drugs , Microencapsulation , Modeling , PLGA

Synchronous Polygon Turning for Implant Manufacturing

Frank S. H. Chuang, Ko-Yu Lin, Yuheng Chen

MSEC 2010; 577-585https://doi.org/10.1115/MSEC2010-34246

Abstract

View Articletitled, Synchronous Polygon Turning for Implant Manufacturing

PDF

Topics: Machining , Manufacturing , Orthopedics , Turning , Blades , Screws , Cutting , Disks , Errors , Metal cutting

A Perfused Two-Chamber System for Anticancer Drug Screening

Liang Ma, Jeremy Barker, Changchun Zhou, Biaoyang Lin, Wei Li

MSEC 2010; 587-590https://doi.org/10.1115/MSEC2010-34326

Abstract

View Articletitled, A Perfused Two-Chamber System for Anticancer Drug Screening

PDF

Topics: Anticancer drugs

Manufacturing System Maintenance

Investigation of Contact Characteristics of Long-Fiber Reinforced Plastic Gears Based on Observation With a High-Speed Camera

Tomoki Otawa, Toshiski Hirogaki, Eiichi Aoyama

MSEC 2010; 591-597https://doi.org/10.1115/MSEC2010-34116

Abstract

View Articletitled, Investigation of Contact Characteristics of Long-Fiber Reinforced Plastic Gears Based on Observation With a High-Speed Camera

PDF

Topics: Fibers , Plastic gears , Gears , Fiber reinforced plastics , Gear teeth , Heat , Temperature , Temperature distribution , Deflection , Heating