Volumes | International Manufacturing Science and Engineering Conference | American Society of Mechanical Engineers Digital Collection

ASME 2009 International Manufacturing Science and Engineering Conference, Volume 1

Advances in Biomedical Manufacturing

Fabrication and Finite Element Simulation of Sequential Laser Shock Peening of Biodegradable Mg-Ca Implants

M. P. Sealy, Y. B. Guo, M. Salahshoor, R. Caslaru

MSEC 2009; 1-8https://doi.org/10.1115/MSEC2009-84238

View Articletitled, Fabrication and Finite Element Simulation of Sequential Laser Shock Peening of Biodegradable Mg-Ca Implants

PDF

Topics: Biodegradation , Corrosion , Finite element analysis , Laser hardening , Manufacturing , Simulation

Investigation of Process-Induced Cell Membrane Stability Using Molecular Dynamics Simulation

Jun Yin, Yong Huang

MSEC 2009; 9-16https://doi.org/10.1115/MSEC2009-84374

Abstract

View Articletitled, Investigation of Process-Induced Cell Membrane Stability Using Molecular Dynamics Simulation

PDF

Topics: Cell membranes , Molecular dynamics simulation , Stability , Damage , Pressure , Rupture , Biomaterials , Manufacturing , Molecular dynamics

Bioenergy Manufacturing

Aspen Plus Process Simulation of Flexible Feedstock Thermo-Chemical Ethanol Production

Nannan Kou, Fu Zhao, Li Zhang

MSEC 2009; 17-23https://doi.org/10.1115/MSEC2009-84090

Abstract

View Articletitled, Aspen Plus Process Simulation of Flexible Feedstock Thermo-Chemical Ethanol Production

PDF

Topics: Ethanol , Feedstock , Process simulation , Biomass , Petroleum , Wood chips , Biofuel , Climate change , Computer simulation , Fuel gasification

Ultrasonic Vibration Assisted Pelleting of Cellulosic Biomass: A Preliminary Experiment

Z. J. Pei, Donghai Wang, Robert Clark

MSEC 2009; 25-31https://doi.org/10.1115/MSEC2009-84205

Abstract

View Articletitled, Ultrasonic Vibration Assisted Pelleting of Cellulosic Biomass: A Preliminary Experiment

PDF

Topics: Biofuel , Biomass , Manufacturing , Vibration

Algal Cell-Surface Interaction: An Overview and Preliminary Test

Wenqiao Wayne Yuan, Yan Cui, Z. J. Pei

MSEC 2009; 33-41https://doi.org/10.1115/MSEC2009-84222

Abstract

View Articletitled, Algal Cell-Surface Interaction: An Overview and Preliminary Test

PDF

Topics: Biofuel , Polystyrene foam , Space , Urethane elastomers

Environmentally Sustainable Manufacturing Processes and Systems

Impact of Supercritical Carbon Dioxide Metalworking Fluids on Tool Life in Turning of Sintered Steel and Milling of Compacted Graphite Iron

Douglas J. MacLean, Kim F. Hayes, Thomas Barnard, Timothy Hull, Ye Eun Park, Steven J. Skerlos

MSEC 2009; 43-48https://doi.org/10.1115/MSEC2009-84026

Abstract

View Articletitled, Impact of Supercritical Carbon Dioxide Metalworking Fluids on Tool Life in Turning of Sintered Steel and Milling of Compacted Graphite Iron

PDF

Topics: Cast iron , Fluids , Metalworking , Milling , Steel , Supercritical carbon dioxide , Turning , Wear , Cutting , Water

Unit Process Life Cycle Inventory for Product Manufacturing Operations

Michael Overcash, Janet Twomey, Devi Kalla

MSEC 2009; 49-55https://doi.org/10.1115/MSEC2009-84065

Abstract

View Articletitled, Unit Process Life Cycle Inventory for Product Manufacturing Operations

PDF

Topics: Cycles , Manufacturing , Design , Energy generation , Sustainability

The Impact of Surface Forces on Particle Flow and Pore Blocking in the Microfiltration of Metalworking Fluids

Seounghyun Ham, John E. Wentz, Shiv G. Kapoor, Richard E. DeVor

MSEC 2009; 57-66https://doi.org/10.1115/MSEC2009-84107

Abstract

View Articletitled, The Impact of Surface Forces on Particle Flow and Pore Blocking in the Microfiltration of Metalworking Fluids

PDF

Topics: Fluids , Metalworking , Microfiltration , Particle flow , Particulate matter , Membranes , Brownian motion , Engineering simulation , Simulation , Dynamic models

Evaluation of Cooling Potential and Tool Life in Turning Using Metalworking Fluids Delivered in Supercritical Carbon Dioxide

Andres F. Clarens, Ye-Eun Park, Jacob Temme, Kim Hayes, Fu Zhao, Steve Skerlos

MSEC 2009; 67-75https://doi.org/10.1115/MSEC2009-84140

Abstract

View Articletitled, Evaluation of Cooling Potential and Tool Life in Turning Using Metalworking Fluids Delivered in Supercritical Carbon Dioxide

PDF

Topics: Cooling , Fluids , Metalworking , Supercritical carbon dioxide , Turning , Sprays , Wear , Carbon dioxide , Cutting , Cast iron

Towards a Design Framework for Bi-Level Estimation of Turning Energy for Parts and Assemblies

He Huang, Gaurav Ameta

MSEC 2009; 77-85https://doi.org/10.1115/MSEC2009-84159

Abstract

View Articletitled, Towards a Design Framework for Bi-Level Estimation of Turning Energy for Parts and Assemblies

PDF

Topics: Design , Turning , Manufacturing , Carbon , Computation , Emissions , Energy efficiency , Energy generation , Geometry , Production planning

Partial Disassembly Sequence Optimization of End-of-Life Products for Value Recovery

Jeremy L. Rickli, Jaime A. Camelio, Giovannina Zapata

MSEC 2009; 87-96https://doi.org/10.1115/MSEC2009-84171

Abstract

View Articletitled, Partial Disassembly Sequence Optimization of End-of-Life Products for Value Recovery

PDF

Topics: Optimization , Probability , Genetic algorithms , Manufacturing , Recycling , Sustainability

Environmental Sustainability of Laser-Based Manufacturing: Case Studies on Laser Shock Peening and Laser Assisted Turning

Fu Zhao, Gautam Naik, Li Zhang

MSEC 2009; 97-105https://doi.org/10.1115/MSEC2009-84206

Abstract

View Articletitled, Environmental Sustainability of Laser-Based Manufacturing: Case Studies on Laser Shock Peening and Laser Assisted Turning

PDF

Topics: Laser hardening , Lasers , Manufacturing , Sustainability , Turning , Aluminum , Cast iron , Cycles , Energy consumption , Environmental Protection Agency

Vessel Power Prediction and Its Impact on Emission Inventory

Fangfang Wang, Han P. Bao

MSEC 2009; 107-115https://doi.org/10.1115/MSEC2009-84220

Abstract

View Articletitled, Vessel Power Prediction and Its Impact on Emission Inventory

PDF

Topics: Emissions , Vessels

Sustain-A-Bear™: Applying Manufacturing Sustainability Practices to Plush Stuffed Animals

Christina Laskowski, Todd Snelson, Saadia Safir

MSEC 2009; 117-126https://doi.org/10.1115/MSEC2009-84224

Abstract

View Articletitled, Sustain-A-Bear™: Applying Manufacturing Sustainability Practices to Plush Stuffed Animals

PDF

Topics: Manufacturing , Sustainability , Bonding , Carbon dioxide , Design , Durability , Fleece (Polyester fabric) , Machinery , Packaging , Recycling

An Surplus Asset Management Model for Environmental Impact Analysis of EOL Electronic Products

Xueqing Qian, Hong-Chao Zhang, Bingbing Li

MSEC 2009; 127-133https://doi.org/10.1115/MSEC2009-84272

Abstract

View Articletitled, An Surplus Asset Management Model for Environmental Impact Analysis of EOL Electronic Products

PDF

Topics: Electronic products , Engineering prototypes , Design , Recycling , Decision making , Dynamic light scattering , Manufacturing , Regulations , System architecture , Waste management

Environmentally Conscious Wing Design for the Medium Altitude Long Endurance Unmanned Aerial Vehicle

Liaquat U. Iqbal, Gautam S. Naik, Daniel Pothala, Phani Kiran Surapaneni, Fu Zhao, John P. Sullivan

MSEC 2009; 135-144https://doi.org/10.1115/MSEC2009-84292

Abstract

View Articletitled, Environmentally Conscious Wing Design for the Medium Altitude Long Endurance Unmanned Aerial Vehicle

PDF

Topics: Design , Unmanned aerial vehicles , Wings

An Environmental Analysis of Nanoparticle-Assisted Diffusion Brazing

Karl R. Haapala, Santosh K. Tiwari, Brian K. Paul

MSEC 2009; 145-153https://doi.org/10.1115/MSEC2009-84308

Abstract

View Articletitled, An Environmental Analysis of Nanoparticle-Assisted Diffusion Brazing

PDF

Topics: Brazing , Diffusion (Physics) , Nanoparticles , Nickel

An Overview of Possible Integration of Green Design Principles Into Mechatronic Product Development Through Product Lifecycle Management

Vukica Jovanovic

MSEC 2009; 155-160https://doi.org/10.1115/MSEC2009-84309

Abstract

View Articletitled, An Overview of Possible Integration of Green Design Principles Into Mechatronic Product Development Through Product Lifecycle Management

PDF

Topics: Green design , Life cycle management , Product development , Decision making , Design , Engineers , Manufacturing , Product design , Recycling

Optimal Scheduling to Achieve Energy Reduction in Automotive Paint Shops

Junwen Wang, Jingshan Li, Ningjian Huang

MSEC 2009; 161-167https://doi.org/10.1115/MSEC2009-84339

Abstract

View Articletitled, Optimal Scheduling to Achieve Energy Reduction in Automotive Paint Shops

PDF

Topics: Control systems , Energy consumption , Manufacturing , Ovens , Painting , Paints , Vehicles

Integration of Sustainability Into Early Design Through Working Knowledge Model and Visual Tools

Srikanth Devanathan, Pranav Koushik, Fu Zhao, Karthik Ramani

MSEC 2009; 169-177https://doi.org/10.1115/MSEC2009-84356

Abstract

View Articletitled, Integration of Sustainability Into Early Design Through Working Knowledge Model and Visual Tools

PDF

Topics: Design , Sustainability , Engineers , Green design , Product design , Life cycle assessment , Mechanical engineers

A Framework for Establishing Energy Efficiency and Environmental Footprint Metrics for Sustainable Manufacturing of Products

Tug˘rul O¨zel, Serdar Yildiz

MSEC 2009; 179-186https://doi.org/10.1115/MSEC2009-84365

Abstract

View Articletitled, A Framework for Establishing Energy Efficiency and Environmental Footprint Metrics for Sustainable Manufacturing of Products

PDF

Topics: Energy efficiency , Manufacturing , Sustainability , Design

Effect of Controlled Modulation on Chip Formation and Interface Tribology in Machining

J. B. Mann, C. Saldana, W. D. Compton, T. N. Farris, K. P. Trumble, S. Chandrasekar

MSEC 2009; 187-191https://doi.org/10.1115/MSEC2009-84381

Abstract

View Articletitled, Effect of Controlled Modulation on Chip Formation and Interface Tribology in Machining

PDF

Topics: Machining , Tribology , Deformation , Shapes

Advances in Manufacturing Process Planning and Scheduling

Sequence Dependent Parallel Machine Scheduling Using Parallel Ant Colony Optimization With Graphics Hardware Acceleration

Weihang Zhu, James Curry, Anjali Mishra, Victor Zaloom

MSEC 2009; 193-199https://doi.org/10.1115/MSEC2009-84145

Abstract

View Articletitled, Sequence Dependent Parallel Machine Scheduling Using Parallel Ant Colony Optimization With Graphics Hardware Acceleration

PDF

Topics: Hardware , Machinery , Optimization , Graphics processing units

Reactive Process Planning: Incorporating Machining, Inspection, and Feedback

Yaoyao F. Zhao, Xun W. Xu, Sheng Q. Xie

MSEC 2009; 201-210https://doi.org/10.1115/MSEC2009-84316

Abstract

View Articletitled, Reactive Process Planning: Incorporating Machining, Inspection, and Feedback

PDF

Topics: Feedback , Inspection , Machining , Production planning , Machinery , Manufacturing , Chain , Computer programming languages , Data collection , Machine tools

A Reconfiguration Methodology for Multiple Assembly System Reconfigurations

D. Smale, S. Ratchev

MSEC 2009; 211-220https://doi.org/10.1115/MSEC2009-84341

Abstract

View Articletitled, A Reconfiguration Methodology for Multiple Assembly System Reconfigurations

PDF

Topics: Manufacturing , Redundancy (Engineering)

Overview of an Adaptive Setup Planning Approach for Job Shop Operations

Lihui Wang

MSEC 2009; 221-229https://doi.org/10.1115/MSEC2009-84355

Abstract

View Articletitled, Overview of an Adaptive Setup Planning Approach for Job Shop Operations

PDF

Topics: Machine shops , Machining

Advances and Technical Challenges in RFID Research and Applications

RFID Product and Part Tracking for the Preventive Maintenance

Gordana Ostojic, Vukica Jovanovic, Stevan Stankovski, Milovan Lazarevic

MSEC 2009; 231-236https://doi.org/10.1115/MSEC2009-84122

Abstract

View Articletitled, RFID Product and Part Tracking for the Preventive Maintenance

PDF

Topics: Maintenance , Cycles , Robots , Databases , Cylinders , Design , Green design , Injection molding machines , Manipulators , Manufacturing

China RFID Patent Analysis

Charles V. Trappey, Hsin-Ying Wu, Fataneh Taghaboni-Dutta, Amy J. C. Trappey

MSEC 2009; 237-245https://doi.org/10.1115/MSEC2009-84168

Abstract

View Articletitled, China RFID Patent Analysis

PDF

Topics: China , Patents , Inventions , Technology development , Waves , Databases , Diffusion (Physics) , Industrial research , Intellectual property

Applying BPN and EWMA SPC Chart to Cold Chain Temperature Monitoring

Kai-Ying Chen, Yi-Cheng Shaw, Mu-Chen Chen, Teh-Chang Wu

MSEC 2009; 247-256https://doi.org/10.1115/MSEC2009-84209

Abstract

View Articletitled, Applying BPN and EWMA SPC Chart to Cold Chain Temperature Monitoring

PDF

Topics: Chain , Statistical process control , Temperature

An RFID-Based Shopping Service System for Retailers

Jiang-Liang Hou, Ting-Gin Chen

MSEC 2009; 257-265https://doi.org/10.1115/MSEC2009-84305

Abstract

View Articletitled, An RFID-Based Shopping Service System for Retailers

PDF

Topics: Algorithms , Economics , Preferences , Sales

Effect of Facility Geometry on RFID Localization Accuracy

Junyi Zhou, Jing Shi

MSEC 2009; 267-275https://doi.org/10.1115/MSEC2009-84323

Abstract

View Articletitled, Effect of Facility Geometry on RFID Localization Accuracy

PDF

Topics: Geometry

Advances in Modeling, Analysis, and Simulation of Manufacturing Processes

Optimal Experimentation for Selecting Stable Milling Parameters: A Bayesian Approach

Michael G. Traverso, Rau´l Zapata, Tony L. Schmitz, Ali E. Abbas

MSEC 2009; 277-282https://doi.org/10.1115/MSEC2009-84032

Abstract

View Articletitled, Optimal Experimentation for Selecting Stable Milling Parameters: A Bayesian Approach

PDF

Topics: Decision making , Experimental design , Manufacturing , Milling , Stability , Uncertainty

Stochastic Modeling and Analysis of Rotary Ultrasonic Machining

Jiaqing Wu, Weilong Cong, Robert E. Williams, Z. J. Pei

MSEC 2009; 283-292https://doi.org/10.1115/MSEC2009-84037

Abstract

View Articletitled, Stochastic Modeling and Analysis of Rotary Ultrasonic Machining

PDF

Topics: Cutting , Modeling , Ultrasonic machining

Cutting Simulation of Laser Assisted Milling of Silicon Nitride Ceramics Using PFC^2D

Xinwei Shen, Shuting Lei

MSEC 2009; 293-299https://doi.org/10.1115/MSEC2009-84041

Abstract

View Articletitled, Cutting Simulation of Laser Assisted Milling of Silicon Nitride Ceramics Using PFC<sup>2D</sup>

PDF

Topics: Cutting , Dimensions , Fracture (Materials) , Lasers , Milling , Particle flow , Silicon nitride ceramics , Simulation

Modeling of the Effect of Path Planning on Deposition of Metal-Ceramic Composite With Laser Powder Deposition Process

Ehsan Foroozmehr, Radovan Kovacevic

MSEC 2009; 301-309https://doi.org/10.1115/MSEC2009-84054

Abstract

View Articletitled, Modeling of the Effect of Path Planning on Deposition of Metal-Ceramic Composite With Laser Powder Deposition Process

PDF

Topics: Cermets , Lasers , Modeling , Path planning , Metals , Composite materials , Finite element model , Cycles , Heat transfer , Heating and cooling

Developing a Durability by Design Process

John Draper

MSEC 2009; 311-319https://doi.org/10.1115/MSEC2009-84064

Abstract

View Articletitled, Developing a Durability by Design Process

PDF

Topics: Cycles , Design , Durability , Endurance limit , Failure , Fatigue analysis , Finite element model , Fracture (Materials) , Stress

Modeling and Simulation of Process and Structure Interactions Considering Turning Operations

Michael F. Zaeh, Florian Schwarz

MSEC 2009; 321-330https://doi.org/10.1115/MSEC2009-84067

Abstract

View Articletitled, Modeling and Simulation of Process and Structure Interactions Considering Turning Operations

PDF

Topics: Machine tools , Modeling , Simulation , Turning , Cutting , Finite element methods , Deformation , Friction , Heat transfer , Machining

Flank Wear of Multi-Layer Coated Tool and Wear Prediction Using Abrasion Wear Model

Kyung-Hee Park, Patrick Y. Kwon

MSEC 2009; 331-340https://doi.org/10.1115/MSEC2009-84100

Abstract

View Articletitled, Flank Wear of Multi-Layer Coated Tool and Wear Prediction Using Abrasion Wear Model

PDF

Topics: Abrasion , Wear , Microscopes , Cutting , Filtration , Finite element analysis , Lasers , Scanning electron microscopes , Steel , Surface roughness

Kinematics Simulation of Grinding Process Based on Virtual Wheel Model and Micro-Cutting Analysis

Xuekun Li, Yiming Kevin Rong

MSEC 2009; 341-346https://doi.org/10.1115/MSEC2009-84147

Abstract

View Articletitled, Kinematics Simulation of Grinding Process Based on Virtual Wheel Model and Micro-Cutting Analysis

PDF

Topics: Cutting , Grinding , Kinematics , Simulation , Wheels , Friction , Grinding wheels , Machining , Manufacturing , Thermal analysis

A Three-Dimensional Transient Modeling and Experimental Analysis of Laser Transformation Hardening by Using High Power Direct Diode Laser

S. Santhanakrishnan, F. R. Kong, R. Kovacevic

MSEC 2009; 347-356https://doi.org/10.1115/MSEC2009-84152

Abstract

View Articletitled, A Three-Dimensional Transient Modeling and Experimental Analysis of Laser Transformation Hardening by Using High Power Direct Diode Laser

PDF

Topics: Experimental analysis , Hardening , Lasers , Modeling , Numerical analysis , Tool steel , Transients (Dynamics)

Dead Time Compensation for a Novel Positioning System via Predictive Controls and Virtual Intermittent Setpoints

Chan Wong, Laine Mears, John Ziegert

MSEC 2009; 357-364https://doi.org/10.1115/MSEC2009-84156

Abstract

View Articletitled, Dead Time Compensation for a Novel Positioning System via Predictive Controls and Virtual Intermittent Setpoints

PDF

Topics: Predictive control , Feedback , Algorithms , Control equipment , Glass , Image processing , Liquid crystals , Path planning , Production equipment , Resolution (Optics)

Simulation of Solidification Defects for Prediction of Dross Formation in Aluminum 5182 Remelt Secondary Ingot

Milan Rakita, Qingyou Han

MSEC 2009; 365-371https://doi.org/10.1115/MSEC2009-84160

Abstract

View Articletitled, Simulation of Solidification Defects for Prediction of Dross Formation in Aluminum 5182 Remelt Secondary Ingot

PDF

Topics: Aluminum , Porosity , Simulation , Solidification

S-Type Cultivator Tines Which Comply With ISO Standard: FEM Analysis of Stresses and Manufacturing Issues

Milan Rakita, Damir Kakas, Branko Skoric, Mileta Tomovic, Qingyou Han, Mark Jackson

MSEC 2009; 373-380https://doi.org/10.1115/MSEC2009-84162

Abstract

View Articletitled, S-Type Cultivator Tines Which Comply With ISO Standard: FEM Analysis of Stresses and Manufacturing Issues

PDF

Topics: Fatigue testing , Finite element methods , Manufacturing , Stress , Thermomechanical treatment , Alloys , Computer software , Dimensions , Finite element analysis , Heat treating (Metalworking)

Model-Based Control of an Advanced Actuated Part-Fixture System

O. J. Bakker, A. A. Popov, S. M. Ratchev

MSEC 2009; 381-393https://doi.org/10.1115/MSEC2009-84175

Abstract

View Articletitled, Model-Based Control of an Advanced Actuated Part-Fixture System

PDF

Topics: Boundary-value problems , Control equipment , Displacement , Electromechanical actuators , Feedback , Filters , Finite element methods , Springs

A Comparative Study of Metamodeling Techniques for Predictive Process Control of Welding Applications

G. Ray Ely, Carolyn Conner Seepersad

MSEC 2009; 395-407https://doi.org/10.1115/MSEC2009-84189

Abstract

View Articletitled, A Comparative Study of Metamodeling Techniques for Predictive Process Control of Welding Applications

PDF

Topics: Process control , Welding , Modeling , Physics , Computer software , Construction , Geometry , Polynomials , Real-time control , Splines

Emerging Trends in Mechatronics and Smart Manufacturing

Devdas Shetty, Lou Manzione

MSEC 2009; 409-418https://doi.org/10.1115/MSEC2009-84231

Abstract

View Articletitled, Emerging Trends in Mechatronics and Smart Manufacturing

PDF

Topics: Manufacturing , Mechatronics , Modeling , Computers , Control systems , Electronics , Engineering simulation , Flight , Machinery , Microelectromechanical systems

A New Finite Element Approach Without Chip Formation to Predict Residual Stress Profile Patterns in Metal Cutting

S. Anurag, Y. B. Guo, Z. Q. Liu

MSEC 2009; 419-426https://doi.org/10.1115/MSEC2009-84236

Abstract

View Articletitled, A New Finite Element Approach Without Chip Formation to Predict Residual Stress Profile Patterns in Metal Cutting

PDF

Topics: Finite element analysis , Metal cutting , Stress

A Volume-of-Fluid Based Numerical Simulation of Solidification in Binary Alloys on Fixed Non-Uniform Co-Located Grids

Mehdi Farrokhnejad, Anthony G. Straatman, Jeffrey T. Wood

MSEC 2009; 427-436https://doi.org/10.1115/MSEC2009-84239

Abstract

View Articletitled, A Volume-of-Fluid Based Numerical Simulation of Solidification in Binary Alloys on Fixed Non-Uniform Co-Located Grids

PDF

Topics: Alloys , Computer simulation , Fluids , Solidification , Magnesium alloys , Algorithms , Approximation , Currents , Die casting (Process) , Die castings (Product)

Effects of Chip Seizure on Steady State Motion of a Machine-Tool

Brandon C. Gegg, Steve S. Suh

MSEC 2009; 437-444https://doi.org/10.1115/MSEC2009-84280

Abstract

View Articletitled, Effects of Chip Seizure on Steady State Motion of a Machine-Tool

PDF

Topics: Machine tools , Steady state , Friction , Systems theory , Cutting , Degrees of freedom , Differential equations , Electromechanical analogies

Modeling of Thermal Dynamics of Dies Using Neural Networks

Jaho Seo, Amir Khajepour, Jan P. Huissoon

MSEC 2009; 445-454https://doi.org/10.1115/MSEC2009-84299

Abstract

View Articletitled, Modeling of Thermal Dynamics of Dies Using Neural Networks

PDF

Topics: Artificial neural networks , Dynamics (Mechanics) , Modeling

A Basic Correction to the Orthogonal Metal Cutting Models

Lewis N. Payton

MSEC 2009; 455-465https://doi.org/10.1115/MSEC2009-84324

Abstract

View Articletitled, A Basic Correction to the Orthogonal Metal Cutting Models

PDF

Topics: Metal cutting

Modeling, Forming, Modal Analysis, and Gauge Optimization of Sheet Metal Parts

Andrew O. Fox, Raghu Echempati

MSEC 2009; 467-473https://doi.org/10.1115/MSEC2009-84326

Abstract

View Articletitled, Modeling, Forming, Modal Analysis, and Gauge Optimization of Sheet Metal Parts

PDF

Topics: Gages , Modal analysis , Modeling , Optimization , Sheet metal , Computer-aided engineering , Instrumentation , Manufacturing , Simulation , Students

Flow Uniformity Characterization and Its Application in Extruder Flow Channel Design Optimization

Minwu Yao, Ching-Chih Lee

MSEC 2009; 475-484https://doi.org/10.1115/MSEC2009-84347

Abstract

View Articletitled, Flow Uniformity Characterization and Its Application in Extruder Flow Channel Design Optimization

PDF

Topics: Design , Flow (Dynamics) , Optimization

Diamond Coatings for Machining: Coating Thickness Effects

Feng Qin, Y. Kevin Chou, Dustin Nolen, Raymond G. Thompson

MSEC 2009; 485-491https://doi.org/10.1115/MSEC2009-84358

Abstract

View Articletitled, Diamond Coatings for Machining: Coating Thickness Effects

PDF

Topics: Coatings , Diamond films , Machining , Coating processes , Cutting , Cutting tools , Diamonds , Chemical vapor deposition , Delamination , Residual stresses

Experimental and Finite Element Investigations on the Influence of Tool Edge Radius in Machining Nickel-Based Alloy

Tug˘rul O¨zel

MSEC 2009; 493-498https://doi.org/10.1115/MSEC2009-84362

Abstract

View Articletitled, Experimental and Finite Element Investigations on the Influence of Tool Edge Radius in Machining Nickel-Based Alloy

PDF

Topics: Alloys , Finite element analysis , Machining , Nickel , Cutting , Geometry , Stress , Engineering simulation , Flow (Dynamics) , Friction

Advances in Materials Forming

Study on Loading Path Influences on the Thickness Distribution of TRIP Steels During Sheet Metal Forming

W. J. Dan, W. G. Zhang, S. H. Li

MSEC 2009; 499-505https://doi.org/10.1115/MSEC2009-84018

Abstract

View Articletitled, Study on Loading Path Influences on the Thickness Distribution of TRIP Steels During Sheet Metal Forming

PDF

Topics: Sheet metal work , Steel

The Effect of Tool Surface Treatment on Friction in Hot Forging Process

Varunee Premanond, Ratchanee Hato, Pakorn Chumrum, Jiraporn Sripraserd

MSEC 2009; 507-512https://doi.org/10.1115/MSEC2009-84062

Abstract

View Articletitled, The Effect of Tool Surface Treatment on Friction in Hot Forging Process

PDF

Topics: Forging , Friction , Lubricants , Surface finishing

Experimental Study on Shear Fracture of Advanced High Strength Steels: Part II

Hua-Chu Shih, Ming F. Shi, Z. Cedric Xia, Danielle Zeng

MSEC 2009; 513-519https://doi.org/10.1115/MSEC2009-84070

Abstract

View Articletitled, Experimental Study on Shear Fracture of Advanced High Strength Steels: Part II

PDF

Topics: Fracture (Materials) , Fracture (Process) , High strength steel , Shear (Mechanics) , Failure , Sheet metal , Tension , Computer simulation , Deformation , Metal stamping

Formability Assessment in Stamping Die Face Morphing Using Strain Increment Method

Liang Zhou, S. Jack Hu, Thomas B. Stoughton

MSEC 2009; 521-529https://doi.org/10.1115/MSEC2009-84092

Abstract

View Articletitled, Formability Assessment in Stamping Die Face Morphing Using Strain Increment Method

PDF

Topics: Design , Displacement , Finite element analysis , Geometry , Manufacturing , Metal stamping , Strain gradient

Experimental Investigation of Grain and Specimen Size Effects During Electrical-Assisted Forming

Michael S. Siopis, Brad L. Kinsey

MSEC 2009; 531-536https://doi.org/10.1115/MSEC2009-84137

Abstract

View Articletitled, Experimental Investigation of Grain and Specimen Size Effects During Electrical-Assisted Forming

PDF

Topics: Copper , Current density , Deformation , Density , Dislocation density , Dislocations , Electric arc furnaces , Electric current , Flow (Dynamics) , Grain size

Investigation of Critical Stress Concentration Factor in Analytical Stress Based Forming Limit Criterion

Kyle R. McLaughlin, Tugce Kasikci, Igor Tsukrov, Brad L. Kinsey

MSEC 2009; 537-545https://doi.org/10.1115/MSEC2009-84138

Abstract

View Articletitled, Investigation of Critical Stress Concentration Factor in Analytical Stress Based Forming Limit Criterion

PDF

Topics: Failure , Forming limit diagrams , Stress , Stress concentration , Necking , Aluminum alloys , Anisotropy , Sheet metal work , Steel

The Effects of Ultrasonic Treatment on Fiber-Reinforced Composite Materials

Chad Braver, Matthew Tumey, Adam Harlow, Qingyou Han

MSEC 2009; 547-551https://doi.org/10.1115/MSEC2009-84149

Abstract

View Articletitled, The Effects of Ultrasonic Treatment on Fiber-Reinforced Composite Materials

PDF

Topics: Fiber reinforced composites , Fibers , Mechanical properties , Bonding , Composite materials , Hardening (Curing) , Resins , Shear (Mechanics) , Stress , Testing

Sheet Metal Hydroforming Tryout Through Numerical and Experimental Validation

A. Del Prete, G. Papadia

MSEC 2009; 553-560https://doi.org/10.1115/MSEC2009-84182

Abstract

View Articletitled, Sheet Metal Hydroforming Tryout Through Numerical and Experimental Validation

PDF

Topics: Blanks , Computer simulation , Experimental analysis , Fluid pressure , Metalworking , Process design , Shapes , Sheet metal , Stress , Surface quality

Shape Factors and Feasibility of an Industrial Product Through Sheet Metal Hydroforming

A. Del Prete, G. Papadia

MSEC 2009; 561-567https://doi.org/10.1115/MSEC2009-84185

Abstract

View Articletitled, Shape Factors and Feasibility of an Industrial Product Through Sheet Metal Hydroforming

PDF

Topics: Shapes , Sheet metal , Geometry , Aerospace industry , Chain , Metalworking , Process design , Surface quality

Theoretical and Practical Estimations Regarding of Borderline Conditions Imposed for Qualitative Achievement of Sliding Bimetallic Bearings From Steel-Bronze

Petru A. Pop, Petru Ungur, Juan Lopez Martinez, Gheorghe Bejinaru-Mihoc

MSEC 2009; 569-576https://doi.org/10.1115/MSEC2009-84193

Abstract

View Articletitled, Theoretical and Practical Estimations Regarding of Borderline Conditions Imposed for Qualitative Achievement of Sliding Bimetallic Bearings From Steel-Bronze

PDF

Topics: Bearings , Bronze , Steel , Tin , Alloys , Adhesion , Casting , Chemical stability , Filler metals , High temperature

FEM Simulation and Experimental Investigation of Reshaping of Thick Tubes in Different Passes

A. Tajyar, K. Abrinia

MSEC 2009; 577-581https://doi.org/10.1115/MSEC2009-84196

Abstract

View Articletitled, FEM Simulation and Experimental Investigation of Reshaping of Thick Tubes in Different Passes

PDF

Topics: Cold rolling , Finite element methods , Finite element model , Simulation , Simulation results , Corners (Structural elements) , High pressure (Physics) , High temperature , Pipes , Wall thickness

Preform Design for Forging Processes Based on Geometrical Resemblance

Chen Yang, Gracious Ngaile

MSEC 2009; 583-591https://doi.org/10.1115/MSEC2009-84253

Abstract

View Articletitled, Preform Design for Forging Processes Based on Geometrical Resemblance

PDF

Topics: Design , Finite element analysis , Forging , Preforms , Simulation

Measurement of the Effect of Surface Topology on Friction by Tip Test

Yong-Taek Im, Ki-Ho Jung, Hyun-Chul Lee, Joseph S. Ajiboye, Seong-Hoon Kang

MSEC 2009; 593-601https://doi.org/10.1115/MSEC2009-84267

Abstract

View Articletitled, Measurement of the Effect of Surface Topology on Friction by Tip Test

PDF

Topics: Finite element analysis , Friction , Lubricants , Topology

An Efficient One-Step Inverse Approach Based on Nodal Tangent Plane

Ping Zhou, Ping Hu, Guang Li, Xiangkui Zhang

MSEC 2009; 603-612https://doi.org/10.1115/MSEC2009-84269

Abstract

View Articletitled, An Efficient One-Step Inverse Approach Based on Nodal Tangent Plane

PDF

Topics: Algorithms , Blanks , Deformation , Equilibrium (Physics) , Finite element analysis , Metal stamping , Newton's method , Plasticity , Shapes , Sheet metal work

Experimental and Numerical Analysis of Double Sided Incremental Forming

Yongjun Wang, Weichao Wu, Ying Huang, N. Venkata Reddy, Jian Cao

MSEC 2009; 613-618https://doi.org/10.1115/MSEC2009-84275

Abstract

View Articletitled, Experimental and Numerical Analysis of Double Sided Incremental Forming

PDF

Topics: Computer software , Finite element analysis , Numerical analysis , Pressing , Rapid prototyping , Shapes , Sheet metal

Strain Control in an Intelligent Die Based Upon Local Force Control and Blank Holder Forces

William J. Emblom, Klaus J. Weinmann, John E. Beard

MSEC 2009; 619-628https://doi.org/10.1115/MSEC2009-84283

Abstract

View Articletitled, Strain Control in an Intelligent Die Based Upon Local Force Control and Blank Holder Forces

PDF

Topics: Blanks , Force control , Control systems , Design , Lubrication , Sensors

Blank Design by ANN in Bimetallic Deep Drawing

M. R. Morovati Mamaghani, B. M. Dariani, M. Haddadzade

MSEC 2009; 629-634https://doi.org/10.1115/MSEC2009-84300

Abstract

View Articletitled, Blank Design by ANN in Bimetallic Deep Drawing

PDF

Topics: Artificial neural networks , Blanks , Design , Shapes , Finite element methods , Optimization , Raw materials

Fabrication of Graded Structures in SiC-Reinforced Metal Matrix by Semisolid Powder Processing

Yufeng Wu, Gap-Yong Kim, Iver Anderson, Thomas Lograsso

MSEC 2009; 635-640https://doi.org/10.1115/MSEC2009-84331

Abstract

View Articletitled, Fabrication of Graded Structures in SiC-Reinforced Metal Matrix by Semisolid Powder Processing

PDF

Topics: Manufacturing , Metals , Particulate matter , Bonding , Composite materials , Materials science , Mechanical properties , Metal powders , Powder metallurgy , Surface roughness

The Microstructural Effects on Magnesium Alloy AZ31B-O While Undergoing an Electrically-Assisted Manufacturing Process

Timothy A. McNeal, Jeffrey A. Beers, John T. Roth

MSEC 2009; 641-650https://doi.org/10.1115/MSEC2009-84377

Abstract

View Articletitled, The Microstructural Effects on Magnesium Alloy AZ31B-O While Undergoing an Electrically-Assisted Manufacturing Process

PDF

Topics: Magnesium alloys , Manufacturing , Alloys , Current density , Deformation , Elongation , Flow (Dynamics) , Grain size , Magnesium (Metal) , Stress

Experimental Study on the Mechanical Property and Forming Limit of Magnesium Sheet at Elevated Temperatures

Y. Huang, J. Huang, J. Cao

MSEC 2009; 651-659https://doi.org/10.1115/MSEC2009-84383

Abstract

View Articletitled, Experimental Study on the Mechanical Property and Forming Limit of Magnesium Sheet at Elevated Temperatures

PDF

Topics: Forming limit diagrams , Magnesium (Metal) , Mechanical properties , Temperature , Aerospace industry , Domes (Structural elements) , Heat treating (Metalworking) , Magnesium alloys , Materials properties , Stress-strain curves

Advances in Semiconductor Materials Manufacturing

Diamond Disc Pad Conditioning in Chemical Mechanical Polishing: A Literature Review of Process Modeling

Emmanuel A. Baisie, Z. C. Li, X. H. Zhang

MSEC 2009; 661-670https://doi.org/10.1115/MSEC2009-84033

Abstract

View Articletitled, Diamond Disc Pad Conditioning in Chemical Mechanical Polishing: A Literature Review of Process Modeling

PDF

Topics: Diamonds , Disks , Modeling , Polishing , Manufacturing , Process control , Semiconductor wafers

Achievement of High Flatness of Large Diameter Silicon Wafer in Double-Sided Polishing: Optimization of Polishing Conditions Considering Relative Motion Direction

Kenji Hirose, Toshiyuki Enomoto

MSEC 2009; 671-676https://doi.org/10.1115/MSEC2009-84055

Abstract

View Articletitled, Achievement of High Flatness of Large Diameter Silicon Wafer in Double-Sided Polishing: Optimization of Polishing Conditions Considering Relative Motion Direction

PDF

Topics: Optimization , Polishing , Semiconductor wafers

The Edge Roll Off Generation Mechanism in Polishing by Considering the Viscoelasticity of Polishing Pads

Takahiro Miyake, Toshiyuki Enomoto, Kenji Hirose

MSEC 2009; 677-682https://doi.org/10.1115/MSEC2009-84063

Abstract

View Articletitled, The Edge Roll Off Generation Mechanism in Polishing by Considering the Viscoelasticity of Polishing Pads

PDF

Topics: Polishing , Semiconductor wafers , Viscoelasticity

Experimental Investigations on Flatness and Subsurface Damage in Lapping of Substrate Wafers: A Literature Review

Weilong Cong, Z. J. Pei, Pengfei Zhang

MSEC 2009; 683-689https://doi.org/10.1115/MSEC2009-84068

Abstract

View Articletitled, Experimental Investigations on Flatness and Subsurface Damage in Lapping of Substrate Wafers: A Literature Review

PDF

Topics: Damage , Grinding , Semiconductor wafers

An Economic Study on Chemical Mechanical Polishing of Silicon Wafers

Emmanuel A. Baisie, Man Yang, Ravindra Kaware, Maria Hooker, Z. C. Li, Wangping Sun, X. H. Zhang

MSEC 2009; 691-697https://doi.org/10.1115/MSEC2009-84072

Abstract

View Articletitled, An Economic Study on Chemical Mechanical Polishing of Silicon Wafers

PDF

Topics: Polishing , Semiconductor wafers , Flow charts , Sensitivity analysis

A Study on Electrolytic In-Process Dressing (ELID) Grinding of Sapphire With Acoustic Emission

Peidong Han, Ioan D. Marinescu, Anil Srivastava

MSEC 2009; 699-705https://doi.org/10.1115/MSEC2009-84084

Abstract

View Articletitled, A Study on Electrolytic In-Process Dressing (ELID) Grinding of Sapphire With Acoustic Emission

PDF

Topics: Acoustic emissions , Grinding , Sapphire

Single Point Diamond Turning Effects on Surface Quality and Subsurface Damage in Ceramics

Deepak Ravindra, John A. Patten, Jun Qu

MSEC 2009; 707-713https://doi.org/10.1115/MSEC2009-84113

Abstract

View Articletitled, Single Point Diamond Turning Effects on Surface Quality and Subsurface Damage in Ceramics

PDF

Topics: Ceramics , Damage , Diamond turning , Surface quality , Machining , Acoustics , Brittleness , Microscopy , Optical microscopy , Quartz

Lapping of Semiconductor Wafers: An Experimental Investigation on Subsurface Damage

P. F. Zhang, Z. J. Pei

MSEC 2009; 715-719https://doi.org/10.1115/MSEC2009-84114

Abstract

View Articletitled, Lapping of Semiconductor Wafers: An Experimental Investigation on Subsurface Damage

PDF

Topics: Damage , Grinding , Semiconductor wafers

Nanotopography in Silicon Wafer Manufacturing: A Literature Review

Na Qin, Z. J. Pei, D. M. Guo

MSEC 2009; 721-728https://doi.org/10.1115/MSEC2009-84201

Abstract

View Articletitled, Nanotopography in Silicon Wafer Manufacturing: A Literature Review

PDF

Topics: Grinding , Manufacturing , Semiconductor wafers

Experimental Study of Lapping Using Mixed Abrasive Grits

Chunhui Chung, Glenn Melendez, Imin Kao

MSEC 2009; 729-736https://doi.org/10.1115/MSEC2009-84210

Abstract

View Articletitled, Experimental Study of Lapping Using Mixed Abrasive Grits

PDF

Topics: Grinding , Semiconductor wafers , Manufacturing , Slurries , Surface roughness , Microelectronic devices , Abrasive machining , Abrasives , Brittleness , Density

Laser-Based Manufacturing

Modeling of Transport Phenomena in the Laser Multilayered Cladding

Fanrong Kong, Radovan Kovacevic

MSEC 2009; 737-745https://doi.org/10.1115/MSEC2009-84010

Abstract

View Articletitled, Modeling of Transport Phenomena in the Laser Multilayered Cladding

PDF

Topics: Cladding systems (Building) , Lasers , Modeling , Transport phenomena

The Effects of Mach Number on Keyhole Shape in High Intensity Beam Welding or Drilling

Shih C. Kuo, Peng S. Wei, Tarasankar DebRoy

MSEC 2009; 747-751https://doi.org/10.1115/MSEC2009-84022

Abstract

View Articletitled, The Effects of Mach Number on Keyhole Shape in High Intensity Beam Welding or Drilling

PDF

Topics: Drilling , Mach number , Shapes , Welding , Collapse , Two-phase flow , Vapors , Drops , Flow (Dynamics) , Fluid dynamics

Shock Wave Propagation and Spallation Study in Laser Shock Peening

Yunfeng Cao, Yung C. Shin

MSEC 2009; 753-762https://doi.org/10.1115/MSEC2009-84048

Abstract

View Articletitled, Shock Wave Propagation and Spallation Study in Laser Shock Peening

PDF

Topics: Laser hardening , Shock waves , Spallation (Nuclear physics) , Lasers , Computer simulation , Damage , Solids

Noise Reduction During Acoustic Monitoring of Laser Welding of High-Strength Steels

Wei Huang, Radovan Kovacevic

MSEC 2009; 763-770https://doi.org/10.1115/MSEC2009-84080

Abstract

View Articletitled, Noise Reduction During Acoustic Monitoring of Laser Welding of High-Strength Steels

PDF

Topics: Acoustics , Laser welding , Noise control , Steel , Microphones , Signals , Laser materials , Microphone arrays , Noise (Sound) , Quality control

Laser Induced High-Strain-Rate Superplastic 3D Micro-Forming of Metallic Thin Film

Huang Gao, Gary J. Cheng

MSEC 2009; 771-778https://doi.org/10.1115/MSEC2009-84087

Abstract

View Articletitled, Laser Induced High-Strain-Rate Superplastic 3D Micro-Forming of Metallic Thin Film

PDF

Topics: Lasers , Metallic thin films , Nanoindentation , Superplasticity

Numerical Simulation on Nanoparticles Integrated Laser Shock Peening of Aluminum Alloy

Chang Ye, Gary J. Cheng

MSEC 2009; 779-786https://doi.org/10.1115/MSEC2009-84088

Abstract

View Articletitled, Numerical Simulation on Nanoparticles Integrated Laser Shock Peening of Aluminum Alloy

PDF

Topics: Aluminum alloys , Computer simulation , Laser hardening , Nanoparticles , Stress , Particle size , Particulate matter , Absorption , Manufacturing , Stress concentration

Multilayer Laser Sintering of HAp/Ti Nanoparticles Onto Metallic Implants

Yi Zhang, Gary J. Cheng

MSEC 2009; 787-798https://doi.org/10.1115/MSEC2009-84089

Abstract

View Articletitled, Multilayer Laser Sintering of HAp/Ti Nanoparticles Onto Metallic Implants

PDF

Topics: Heat transfer , Lasers , Nanoparticles , Sintering

Effects of Pulse Shape Modulation in Nd:YAG Laser Beam Welding on the Weld Pool Flow and Solidification

J. Wilden, S. Jahn, P. Kotali´k, T. P. Neumann, R. Holtz

MSEC 2009; 799-805https://doi.org/10.1115/MSEC2009-84144

Abstract

View Articletitled, Effects of Pulse Shape Modulation in Nd:YAG Laser Beam Welding on the Weld Pool Flow and Solidification

PDF

Topics: Flow (Dynamics) , Nd-YAG lasers , Shapes , Solidification , Welding , Heat , Laser beams , Laser welding , Welded joints , Dynamics (Mechanics)

Automatic Characterization of the Material Removal Rate in Laser Manufacturing of TiAl6V4 and Inconel 718

Leonardo Orazi, Gabriele Cuccolini, Giovanni Tani

MSEC 2009; 807-816https://doi.org/10.1115/MSEC2009-84181

Abstract

View Articletitled, Automatic Characterization of the Material Removal Rate in Laser Manufacturing of TiAl6V4 and Inconel 718

PDF

Topics: Lasers , Manufacturing , Milling , Computer simulation , Computer software , Fiber lasers , Regression models , Superalloys

Dynamic Simulation of Temperature Field in Hybrid Laser-GTAW Welding of Galvanized Steels in a Gap-Free Lap Joint Configuration

Shanglu Yang, Fanrong Kong, Ehsan Forroozmehr, Radovan Kovacevic

MSEC 2009; 817-825https://doi.org/10.1115/MSEC2009-84184

Abstract

View Articletitled, Dynamic Simulation of Temperature Field in Hybrid Laser-GTAW Welding of Galvanized Steels in a Gap-Free Lap Joint Configuration

PDF

Topics: Gas tungsten arc welding , Lasers , Simulation , Steel , Temperature , Welding , Heat , Temperature distribution , Dimensions , Finite element methods

Force Analysis, Mechanical Energy and Laser Heating Evaluation of Scratch Tests on Silicon Carbide (4H-SiC) in Micro-Laser Assisted Machining (µ-LAM) Process

Amir R. Shayan, Huseyin Bogac Poyraz, Deepak Ravindra, Muralidhar Ghantasala, John A. Patten

MSEC 2009; 827-832https://doi.org/10.1115/MSEC2009-84207

Abstract

View Articletitled, Force Analysis, Mechanical Energy and Laser Heating Evaluation of Scratch Tests on Silicon Carbide (4H-SiC) in Micro-Laser Assisted Machining (µ-LAM) Process

PDF

Topics: Heating , Lasers , Machining , Silicon , Cutting tools , Cutting , Atomic force microscopy , Diamonds , Geometry , Laser beams

Laser Assisted Finish Turning of Inconel 718: Process Optimization

Salar Tavakoli, Helmi Attia, Raul Vargas, Vincent Thomson

MSEC 2009; 833-840https://doi.org/10.1115/MSEC2009-84211

Abstract

View Articletitled, Laser Assisted Finish Turning of Inconel 718: Process Optimization

PDF

Topics: Lasers , Optimization , Turning , Cutting , Finishes , Machining , Superalloys , Wear , Machinability , Machinery

Fabrication and Characterization of Micro Dent Arrays by Laser Shock Peening on Ti-6Al-4V Surfaces

R. Caslaru, Y. B. Guo, M. P. Sealy

MSEC 2009; 841-844https://doi.org/10.1115/MSEC2009-84235

Abstract

View Articletitled, Fabrication and Characterization of Micro Dent Arrays by Laser Shock Peening on Ti-6Al-4V Surfaces

PDF

Topics: Laser hardening , Manufacturing

The Laser-Assisted Edge Milling of Ceramic Matrix Composites

Jay C. Rozzi, Michael D. Barton

MSEC 2009; 845-852https://doi.org/10.1115/MSEC2009-84261

Abstract

View Articletitled, The Laser-Assisted Edge Milling of Ceramic Matrix Composites

PDF

Topics: Ceramic matrix composites , Lasers , Milling , Machining , Cutting , Cutting tools , Cycles , Machine tools , Temperature

A Unified Simple Predictive Model for High Fluence Ultra-Short Pulsed Laser Ablation of Metal, Semiconductor and Dielectric

Benxin Wu, Yung C. Shin

MSEC 2009; 853-859https://doi.org/10.1115/MSEC2009-84317

Abstract

View Articletitled, A Unified Simple Predictive Model for High Fluence Ultra-Short Pulsed Laser Ablation of Metal, Semiconductor and Dielectric

PDF

Topics: Fluence (Radiation measurement) , Laser ablation , Metals , Semiconductors (Materials)

Numerical Simulation of Laser Beam Propagation in High Aspect Ratio Channel

Benxin Wu, Sha Tao, Shuting Lei

MSEC 2009; 861-865https://doi.org/10.1115/MSEC2009-84318

Abstract

View Articletitled, Numerical Simulation of Laser Beam Propagation in High Aspect Ratio Channel

PDF

Topics: Computer simulation , Laser beams , Polarization (Electricity) , Polarization (Light) , Polarization (Waves) , Finite element methods , Lasers , Machining , Modeling , Process design

All Years

Proceedings Papers

Advances in Biomedical Manufacturing

Bioenergy Manufacturing

Environmentally Sustainable Manufacturing Processes and Systems

Advances in Manufacturing Process Planning and Scheduling

Advances and Technical Challenges in RFID Research and Applications

Advances in Modeling, Analysis, and Simulation of Manufacturing Processes

Advances in Materials Forming

Advances in Semiconductor Materials Manufacturing

Laser-Based Manufacturing

Email alerts

Most Read Proceedings Papers in MSEC

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only