Volumes | International Manufacturing Science and Engineering Conference | American Society of Mechanical Engineers Digital Collection

ASME 2008 International Manufacturing Science and Engineering Conference, Volume 1

Materials

Adhesion and Interfaces

Simulation of Crack Initiation at the Interface Edge Between Sub-Micron Thick Films Under Creep by Cohesive Zone Model

Do Van Truong

MSEC 2008; 1-6https://doi.org/10.1115/MSEC_ICMP2008-72061

View Articletitled, Simulation of Crack Initiation at the Interface Edge Between Sub-Micron Thick Films Under Creep by Cohesive Zone Model

PDF

Topics: Creep , Fracture (Materials) , Simulation , Thick films

Interface Effects on Coating Failure of Diamond Coated Cutting Tools

Jianwen Hu, Kevin Chou, Raymond G. Thompson

MSEC 2008; 7-14https://doi.org/10.1115/MSEC_ICMP2008-72309

Abstract

View Articletitled, Interface Effects on Coating Failure of Diamond Coated Cutting Tools

PDF

Topics: Coatings , Cutting tools , Diamonds , Failure , Stress , Elasticity , Cracking (Materials) , Delamination , Diamond films , Fracture (Process)

Material Selection, Processing, Reuse and Recycle for Sustainable Manufacturing

Disassembly Planning and Timing Through a Petri Net Approach

Han P. Bao, ChunHsi Lei

MSEC 2008; 15-21https://doi.org/10.1115/MSEC_ICMP2008-72034

Abstract

View Articletitled, Disassembly Planning and Timing Through a Petri Net Approach

PDF

Topics: Manufacturing , Sustainability

An Economic Model for the Maintenance of a Device Submitted to Minor and Major Repairs

Hrishikesh Phadke, Han P. Bao, Anthony W. Dean

MSEC 2008; 23-31https://doi.org/10.1115/MSEC_ICMP2008-72130

Abstract

View Articletitled, An Economic Model for the Maintenance of a Device Submitted to Minor and Major Repairs

PDF

Topics: Maintenance , Failure , Machinery

Economic and Environmental Assessment of Automotive Remanufacturing: Alternator Case Study

Hyung-Ju Kim, Vineet Raichur, Steven J. Skerlos

MSEC 2008; 33-40https://doi.org/10.1115/MSEC_ICMP2008-72490

Abstract

View Articletitled, Economic and Environmental Assessment of Automotive Remanufacturing: Alternator Case Study

PDF

Topics: Cycles , Emissions , Energy consumption , Natural resources , Sustainability , Vehicles

Metal and Metal Matrix Composites

Experimental Study on Shear Fracture of Advanced High Strength Steels

Hua-Chu Shih, Ming F. Shi

MSEC 2008; 41-47https://doi.org/10.1115/MSEC_ICMP2008-72046

Abstract

View Articletitled, Experimental Study on Shear Fracture of Advanced High Strength Steels

PDF

Topics: Fracture (Process) , High strength steel , Shear (Mechanics) , Metal stamping , Tension , Computer simulation , Gages , Failure , Forming limit diagrams , Manufacturing

A Comparative Assessment of Austempered Ductile Iron as a Substitute in Weight Reduction Applications

Ashwin Polishetty, Sarat Singamneni, Guy Littlefair

MSEC 2008; 49-57https://doi.org/10.1115/MSEC_ICMP2008-72091

Abstract

View Articletitled, A Comparative Assessment of Austempered Ductile Iron as a Substitute in Weight Reduction Applications

PDF

Topics: Nodular iron , Weight (Mass) , Machinability , Machining , Design , Materials properties , Aluminum , Aluminum alloys , Automotive industry , Economics

A Comparative Study on Hydraulic Bulge Testing and Analysis Methods

Eren Billur, Muammer Koc¸

MSEC 2008; 59-65https://doi.org/10.1115/MSEC_ICMP2008-72238

Abstract

View Articletitled, A Comparative Study on Hydraulic Bulge Testing and Analysis Methods

PDF

Topics: Testing , Stress , Flow (Dynamics) , Domes (Structural elements) , Measurement systems , Optical measurement , Pressure , Reliability , Shapes , Strain measurement

Modeling Machinability Parameters of Turning Al-SiC (10p) MMC by Artificial Neural Network

N. Muthukrishnan, Ravi Mohan, M. S. Thiagarajan, J. Venugopal

MSEC 2008; 67-72https://doi.org/10.1115/MSEC_ICMP2008-72329

Abstract

View Articletitled, Modeling Machinability Parameters of Turning Al-SiC (10p) MMC by Artificial Neural Network

PDF

Topics: Artificial neural networks , Energy consumption , Finishes , Machinability , Machining , Metal matrix composites , Modeling , Turning

Study of the Sandwich Sheet Metal Cup Drawing Characteristics

Jun Chen, Yong Wang, Haibo Li

MSEC 2008; 73-78https://doi.org/10.1115/MSEC_ICMP2008-72415

Abstract

View Articletitled, Study of the Sandwich Sheet Metal Cup Drawing Characteristics

PDF

Topics: Sheet metal , Finite element methods , Finite element model , Skin , Computer simulation , Corners (Structural elements) , Damping , Metals , Polymers , Sheet materials

Polymer and Polymer Matrix Composites

Modeling the Flow and Distribution of Nanoparticles in Friction Stir Processed Polymeric Composite Materials

Yong X. Gan

MSEC 2008; 79-83https://doi.org/10.1115/MSEC_ICMP2008-72049

Abstract

View Articletitled, Modeling the Flow and Distribution of Nanoparticles in Friction Stir Processed Polymeric Composite Materials

PDF

Topics: Flow (Dynamics) , Friction , Modeling , Nanoparticles , Polymer composites , Pressure , Manufacturing , Alloys , Aluminum alloys , Composite materials

Numerical and Experimental Study on the Injection Moulding of a Thin-Wall Complex Part

Catalin Fetecau, Ion Postolache, Felicia Stan

MSEC 2008; 85-93https://doi.org/10.1115/MSEC_ICMP2008-72196

Abstract

View Articletitled, Numerical and Experimental Study on the Injection Moulding of a Thin-Wall Complex Part

PDF

Topics: Injection molding , Thin wall structures , Computers , Temperature , Computer simulation , Computer software , Flow (Dynamics) , Geometry , Melting , Molding

Meso-Macro Simulations of Textile Composite Forming

Nahiene Hamila, Philippe Boisse, Sylvain Chatel

MSEC 2008; 95-101https://doi.org/10.1115/MSEC_ICMP2008-72382

Abstract

View Articletitled, Meso-Macro Simulations of Textile Composite Forming

PDF

Topics: Composite materials , Engineering simulation , Simulation , Textiles , Computation , Fibers , Finite element analysis , Mechanical behavior , Physics , Resins

Improved Performance of Polymethyl Methacrylate for Minimally Invasive Orthopedic Implants

Megan Schroeder, Steven R. Schmid

MSEC 2008; 103-109https://doi.org/10.1115/MSEC_ICMP2008-72466

Abstract

View Articletitled, Improved Performance of Polymethyl Methacrylate for Minimally Invasive Orthopedic Implants

PDF

Topics: Orthopedics , Polymers , Braid (Textile) , Chemistry , Metals , Biomedicine , Cements (Adhesives) , Cycles , Failure , Fatigue

Processing

Advanced Powder Processing Technique

Microstructure and Mechanical Properties of ZrO₂(Y₂O₃)-Al₂O₃ Nano Composites Prepared by Spark Plasma Sintering

Shufeng Li, Hiroshi Izui, Michiharu Okano, Weihua Zhang, Taku Watanabe

MSEC 2008; 111-116https://doi.org/10.1115/MSEC_ICMP2008-72322

Abstract

View Articletitled, Microstructure and Mechanical Properties of ZrO2(Y2O3)-Al2O3 Nano Composites Prepared by Spark Plasma Sintering

PDF

Topics: Fracture toughness , Mechanical properties , Nanocomposites , Plasmas (Ionized gases) , Sintering

Processing of ZrW₂O₈-ZrO₂ Continuous Functionally Graded Materials by Co-Sintering ZrO₂ and ZrO₂+WO₃ Multi-Layer Compacts

Li Sun, Sam Baldauf, Patrick Kwon

MSEC 2008; 117-122https://doi.org/10.1115/MSEC_ICMP2008-72368

Abstract

View Articletitled, Processing of ZrW2O8-ZrO2 Continuous Functionally Graded Materials by Co-Sintering ZrO2 and ZrO2+WO3 Multi-Layer Compacts

PDF

Topics: Functionally graded materials , Sintering

Advanced Welding and Bonding Technology

Dimensional Variation Analysis of T-Node Joints Using Aluminum 6063-T52 Extrusion Material in Gas Metal Arc Welding (GMAW) Joining Process

Ramakrishna Koganti, Armando Joaquin, Chris Karas

MSEC 2008; 123-128https://doi.org/10.1115/MSEC_ICMP2008-72071

Abstract

View Articletitled, Dimensional Variation Analysis of T-Node Joints Using Aluminum 6063-T52 Extrusion Material in Gas Metal Arc Welding (GMAW) Joining Process

PDF

Topics: Aluminum , Extruding , Gas metal arc welding , Joining , Welding , Manufacturing , Architecture , Cycles , Design , Gas flow

The Influence of the Chemical Composition of Welding Material Used in Semi-Automatic Welding for Pipeline Steel on Mechanical Properties

Lu Bai, Lige Tong, Hongsheng Ding, Li Wang, Qilan Kang, Shiwu Bai

MSEC 2008; 129-132https://doi.org/10.1115/MSEC_ICMP2008-72110

Abstract

View Articletitled, The Influence of the Chemical Composition of Welding Material Used in Semi-Automatic Welding for Pipeline Steel on Mechanical Properties

PDF

Topics: Mechanical properties , Pipelines , Steel , Welding , Artificial neural networks , Elongation , Errors , Fracture toughness , Metallic elements , Momentum

Influence of Metal Inert Gas (MIG) Welding Factors Wire Feed Rate and Weld Travel Speed on Aluminum Weld Joint Strength

Ramakrishna Koganti, Armando Joaquin, Matthew Zaluzec, Chris Karas

MSEC 2008; 133-136https://doi.org/10.1115/MSEC_ICMP2008-72127

Abstract

View Articletitled, Influence of Metal Inert Gas (MIG) Welding Factors Wire Feed Rate and Weld Travel Speed on Aluminum Weld Joint Strength

PDF

Topics: Aluminum , Metals , Welding , Wire , Design , Waves , Gas flow , Gas metal arc welding

E-Design Tool for Friction Stir Welding

Harish Bagaitkar, Venkat Allada

MSEC 2008; 137-142https://doi.org/10.1115/MSEC_ICMP2008-72207

Abstract

View Articletitled, E-Design Tool for Friction Stir Welding

PDF

Topics: Databases , Design , Friction , Welding

Monitoring of the Spatter Formation in Laser Welding of Galvanized Steels in Lap Joint Configuration by the Measurement of the Acoustic Emission

Shanglu Yang, Wei Huang, Dechao Lin, Fanrong Kong, Radovan Kovacevic

MSEC 2008; 143-146https://doi.org/10.1115/MSEC_ICMP2008-72224

Abstract

View Articletitled, Monitoring of the Spatter Formation in Laser Welding of Galvanized Steels in Lap Joint Configuration by the Measurement of the Acoustic Emission

PDF

Topics: Acoustic emissions , Laser welding , Steel

Spot Friction Weld Strength Improvement Through In-Process Metal Matrix Formation

Senthil Arul, Grant H. Kruger, Scott F. Miller, Tsung-Yu Pan, Albert J. Shih

MSEC 2008; 147-153https://doi.org/10.1115/MSEC_ICMP2008-72502

Abstract

View Articletitled, Spot Friction Weld Strength Improvement Through In-Process Metal Matrix Formation

PDF

Topics: Friction , Metals , Alloys , Copper , Ceramics , Heat , Metal matrix composites , Shear (Mechanics) , Steel , Zirconium

Coating and Thermal Spraying

Improving the Surface Roughness of a CVD Coated Silicon Carbide Disk by Performing Ductile Regime Single Point Diamond Turning

Deepak Ravindra, John Patten

MSEC 2008; 155-161https://doi.org/10.1115/MSEC_ICMP2008-72145

Abstract

View Articletitled, Improving the Surface Roughness of a CVD Coated Silicon Carbide Disk by Performing Ductile Regime Single Point Diamond Turning

PDF

Topics: Chemical vapor deposition , Diamond turning , Disks , Silicon , Surface roughness , Machining , Surface quality , Brittleness , Ceramics , Diamond tools

Surface Integrity of End Milled Ti-6Al-4V Using the TiAlN Coated Tool

Y. B. Guo, Jie Sun

MSEC 2008; 163-168https://doi.org/10.1115/MSEC_ICMP2008-72234

Abstract

View Articletitled, Surface Integrity of End Milled Ti-6Al-4V Using the TiAlN Coated Tool

PDF

Topics: Aerospace industry , Anisotropy , Biomedicine , Bulk solids , Chemical industry , Cutting , Milling , Stress , Surface roughness , Titanium

Effect of Bias Voltage on Fatigue Behavior of CrN Film Deposited on Ti-6Al-4V Alloy

Md. Shamimur Rahman, Daisuke Yonekura, Takeshi Katsuma, Ri-Ichi Murakami

MSEC 2008; 169-174https://doi.org/10.1115/MSEC_ICMP2008-72441

Abstract

View Articletitled, Effect of Bias Voltage on Fatigue Behavior of CrN Film Deposited on Ti-6Al-4V Alloy

PDF

Topics: Alloys , Fatigue , Titanium alloys

Emerging and Non-Traditional Manufacturing Technologies

Effect of Tool Wear on Rolling Contact Fatigue Performance of Superfinish Hard Machined Surfaces

Youngsik Choi, C. Richard Liu

MSEC 2008; 175-182https://doi.org/10.1115/MSEC_ICMP2008-72078

Abstract

View Articletitled, Effect of Tool Wear on Rolling Contact Fatigue Performance of Superfinish Hard Machined Surfaces

PDF

Topics: Fatigue , Rolling contact , Wear , Machining , Residual stresses , Cutting tools , Fatigue life , Fatigue testing , Microhardness

Machinability of Compacted Graphite Iron in Honing

Yhu-Tin Lin

MSEC 2008; 183-190https://doi.org/10.1115/MSEC_ICMP2008-72083

Abstract

View Articletitled, Machinability of Compacted Graphite Iron in Honing

PDF

Topics: Cast iron , Machinability , Casting , Cylinders , Diesel engines , Energy efficiency , Engine design , Engines , Machining , Manufacturing

Experimental Study on Submersed Gas-Jetting EDM

X. M. Kang, W. S. Zhao, C. J. Tang, L. S. Ding

MSEC 2008; 191-195https://doi.org/10.1115/MSEC_ICMP2008-72111

Abstract

View Articletitled, Experimental Study on Submersed Gas-Jetting EDM

PDF

Topics: Electrical discharge machining , Electrodes , Machining , Cooling , Evacuations , High pressure (Physics) , Pressure , Surface quality , Wear

Laser Polishing Parameter Optimization for Die and Moulds Surface Finishing

E. Ukar, A. Lamikiz, L. N. Lo´pez de Lacalle, F. Liebana, J. M. Etayo

MSEC 2008; 197-204https://doi.org/10.1115/MSEC_ICMP2008-72258

Abstract

View Articletitled, Laser Polishing Parameter Optimization for Die and Moulds Surface Finishing

PDF

Topics: Lasers , Optimization , Polishing , Surface finishing , Manufacturing , Experimental design , Surface roughness , Carbon dioxide , Laser beams , Melting

Shifting Secondary Discharge as the Expulsion Mechanism in EDM

Y. F. Luo, Jia Tao

MSEC 2008; 205-209https://doi.org/10.1115/MSEC_ICMP2008-72274

Abstract

View Articletitled, Shifting Secondary Discharge as the Expulsion Mechanism in EDM

PDF

Topics: Electrical discharge machining , Anodes , Machining , Copper , Electrodes , Metals , Steel

A New Computationally Efficient Method in Laser Hardening Modeling

Leonardo Orazi, Alessandro Fortunato, Giovanni Tani, Giampaolo Campana, Alessandro Ascari, Gabriele Cuccolini

MSEC 2008; 211-218https://doi.org/10.1115/MSEC_ICMP2008-72501

Abstract

View Articletitled, A New Computationally Efficient Method in Laser Hardening Modeling

PDF

Topics: Laser hardening , Modeling , Heating , Lasers , Quenching (Metalworking) , Alloy steel , Approximation , Assembly lines , Carbon , Carbon steel

Experimental Investigation of Surface Roughness in Cylindrical Wire Electro Discharge Machining (CWEDM)

Hossein Mohammadi, Alireza Fadaei Tehrani, Ali Z. Hamadani, Aminollah Mohammadi

MSEC 2008; 219-226https://doi.org/10.1115/MSEC_ICMP2008-72604

Abstract

View Articletitled, Experimental Investigation of Surface Roughness in Cylindrical Wire Electro Discharge Machining (CWEDM)

PDF

Topics: Electrical discharge machining , Surface roughness , Wire , Machining , Rotation , Cross section (Physics) , Experimental design , Heat , Machinery , Scanning electron microscopy

Energy Field Manufacturing

Structural Modification of Amorphous Fused Silica Under Femtosecond Laser Irradiation

S. Vukelic, B. Gao, S. Ryu, Y. L. Yao

MSEC 2008; 227-236https://doi.org/10.1115/MSEC_ICMP2008-72210

Abstract

View Articletitled, Structural Modification of Amorphous Fused Silica Under Femtosecond Laser Irradiation

PDF

Topics: Irradiation (Radiation exposure) , Lasers , Materials properties , Absorption , Atomic force microscopy , Dielectric materials , Electromagnetic induction , Optical microscopy , Plasmas (Ionized gases) , Raman spectroscopy

Fabrication and Finite Element Analysis of Micro Dents Using μ-Laser Shock Peening

Michael P. Sealy, Y. B. Guo, M. F. Horstemeyer

MSEC 2008; 237-244https://doi.org/10.1115/MSEC_ICMP2008-72231

Abstract

View Articletitled, Fabrication and Finite Element Analysis of Micro Dents Using μ-Laser Shock Peening

PDF

Topics: Finite element analysis , Lasers , Manufacturing , Shock (Mechanics) , Shot peening , Laser hardening , Transients (Dynamics) , Stress , Geometry , Laser materials

A Parametric Study on Overlapping Laser Shock Peening of 4140 Steel via Modeling and Experiments

Yunfeng Cao, Yung C. Shin, Benxin Wu

MSEC 2008; 245-254https://doi.org/10.1115/MSEC_ICMP2008-72259

Abstract

View Articletitled, A Parametric Study on Overlapping Laser Shock Peening of 4140 Steel via Modeling and Experiments

PDF

Topics: Laser hardening , Modeling , Steel , Coating processes , Coatings , Finite element model , Lasers , Stress , Corrosion , Fatigue

Manipulating Shape and Size of Nanoparticles With Plasma Field

Tao Deng, James R. Cournoyer, James H. Schermerhorn, Joleyn Balch, Margaret L. Blohm

MSEC 2008; 255-261https://doi.org/10.1115/MSEC_ICMP2008-72293

Abstract

View Articletitled, Manipulating Shape and Size of Nanoparticles With Plasma Field

PDF

Topics: Anisotropy , Etching , Nanoparticles , Plasmas (Ionized gases) , Reactive-ion etching , Shapes

Numerical Investigation of Temperature Field During Sintering of Bioceramic Nanoparticles by Pulse Lasers

Chang Ye, Gary J. Cheng

MSEC 2008; 263-273https://doi.org/10.1115/MSEC_ICMP2008-72426

Abstract

View Articletitled, Numerical Investigation of Temperature Field During Sintering of Bioceramic Nanoparticles by Pulse Lasers

PDF

Topics: Lasers , Nanoparticles , Sintering , Temperature , Electromagnetic fields , Heat , Coating processes , Coatings , Heat flux , Heat transfer

Investigation on Operating Temperature in Laser Assisted Milling of Silicon Nitride Ceramics

Xinwei Shen, Shuting Lei

MSEC 2008; 275-282https://doi.org/10.1115/MSEC_ICMP2008-72463

Abstract

View Articletitled, Investigation on Operating Temperature in Laser Assisted Milling of Silicon Nitride Ceramics

PDF

Topics: Absorption , Heat , Lasers , Milling , Operating temperature , Silicon nitride ceramics

Effect of Electrical Pulsing on Various Heat Treatments of 5XXX Series Aluminum Alloys

Wesley A. Salandro, Joshua J. Jones, Timothy A. McNeal, John T. Roth, Sung-Tae Hong, Mark T. Smith

MSEC 2008; 283-292https://doi.org/10.1115/MSEC_ICMP2008-72512

Abstract

View Articletitled, Effect of Electrical Pulsing on Various Heat Treatments of 5XXX Series Aluminum Alloys

PDF

Topics: Aluminum , Aluminum alloys , Heat , Deformation , Elongation , Stress , Superplasticity , Displacement , Electric current , Flow (Dynamics)

Spatially Resolved Characterization of Geometrically Necessary Dislocation Dependent Deformation in Micro-Scale Laser Shock Peening

Youneng Wang, Sinisa Vukelic, Jeffrey W. Kysar, Y. Lawrence Yao

MSEC 2008; 293-302https://doi.org/10.1115/MSEC_ICMP2008-72514

Abstract

View Articletitled, Spatially Resolved Characterization of Geometrically Necessary Dislocation Dependent Deformation in Micro-Scale Laser Shock Peening

PDF

Topics: Deformation , Dislocations , Laser hardening , Microscale devices , Electron backscatter diffraction , Plasticity , Simulation , Anisotropy , Crystal lattices , Crystals

Review of Intelligent Energy Field Manufacturing (EFM)

Wenwu Zhang

MSEC 2008; 303-309https://doi.org/10.1115/MSEC_ICMP2008-72541

Abstract

View Articletitled, Review of Intelligent Energy Field Manufacturing (EFM)

PDF

Topics: Innovation , Manufacturing , Waste-to-energy

Environmentally Sustainable Manufacturing Systems

An Integrated Decision Analysis for the Sustainable Product Design

Jun-Ki Choi, Karthik Ramani

MSEC 2008; 311-318https://doi.org/10.1115/MSEC_ICMP2008-72029

Abstract

View Articletitled, An Integrated Decision Analysis for the Sustainable Product Design

PDF

Topics: Decision analysis , Product design , Sustainability , Design , Cycles , Decision making , Environmental health and safety , Life cycle assessment , Manufacturing , Product development

Introducing Sustainability Early Into Manufacturing Process Planning

Mahesh Mani, Kevin W. Lyons, Sudarsan Rachuri, Eswaran Subrahmanian, Gaurav Ameta, Ram D. Sriram, Shaw C. Feng

MSEC 2008; 319-326https://doi.org/10.1115/MSEC_ICMP2008-72129

Abstract

View Articletitled, Introducing Sustainability Early Into Manufacturing Process Planning

PDF

Topics: Manufacturing , Sustainability , Energy consumption , Collaboration , Production equipment

Metrics for Sustainable Manufacturing

Corinne Reich-Weiser, Athulan Vijayaraghavan, David A. Dornfeld

MSEC 2008; 327-335https://doi.org/10.1115/MSEC_ICMP2008-72223

Abstract

View Articletitled, Metrics for Sustainable Manufacturing

PDF

Topics: Manufacturing , Sustainability , Climate change , Decision making , Design , Energy consumption , Water

Surface Finish in Hard Machining by PVD-Coated End-Mills Using Solid Lubricant

Shantisagar Biradar, Geeta Lathkar, S. K. Basu

MSEC 2008; 337-341https://doi.org/10.1115/MSEC_ICMP2008-72456

Abstract

View Articletitled, Surface Finish in Hard Machining by PVD-Coated End-Mills Using Solid Lubricant

PDF

Topics: Finishes , Lubricants , Machining

Innovative Cutting Tool Technologies for Modern Machining Challenges

Modeling Machining at High Speeds as a Fluid Mechanics Problem

Roman V. Kazban, James J. Mason

MSEC 2008; 343-350https://doi.org/10.1115/MSEC_ICMP2008-72082

Abstract

View Articletitled, Modeling Machining at High Speeds as a Fluid Mechanics Problem

PDF

Topics: Fluid mechanics , Machining , Modeling , Flow (Dynamics) , Momentum , Approximation , Constitutive equations , Deformation , Metals , Temperature

Some Discussions of Virtual Testing of Cutting Tools

Christian E. Fischer

MSEC 2008; 351-358https://doi.org/10.1115/MSEC_ICMP2008-72131

Abstract

View Articletitled, Some Discussions of Virtual Testing of Cutting Tools

PDF

Topics: Cutting tools , Testing , Computer simulation , Cutting , Design , Engineering prototypes , Finite element analysis , Machining , Simulation , Temperature

Definition of Cutting Conditions for Thin-to-Thin Milling of Aerospace Low Rigidity Parts

F. J. Campa, L. N. Lopez de Lacalle, G. Urbikain, D. Ruiz

MSEC 2008; 359-368https://doi.org/10.1115/MSEC_ICMP2008-72200

Abstract

View Articletitled, Definition of Cutting Conditions for Thin-to-Thin Milling of Aerospace Low Rigidity Parts

PDF

Topics: Aerospace industry , Cutting , Milling , Stiffness , Machining , Stability , Chatter , Dimensions , Finite element analysis , Fixturing

Numerical Simulations of 3D Tool Geometry Effects on Deposition Stresses in Diamond Coated Cutting Tools

Anderson Renaud, Jianwen Hu, Feng Qin, Kevin Chou

MSEC 2008; 369-375https://doi.org/10.1115/MSEC_ICMP2008-72204

Abstract

View Articletitled, Numerical Simulations of 3D Tool Geometry Effects on Deposition Stresses in Diamond Coated Cutting Tools

PDF

Topics: Computer simulation , Cutting tools , Diamonds , Geometry , Stress , Corners (Structural elements) , Computer software , Computer-aided design , Finite element analysis , Machining

Modeling and Analysis of the Thread Milling Operation in the Combined Drilling/Thread Milling Process

Martin B. G. Jun, Anna Carla Araujo

MSEC 2008; 377-386https://doi.org/10.1115/MSEC_ICMP2008-72209

Abstract

View Articletitled, Modeling and Analysis of the Thread Milling Operation in the Combined Drilling/Thread Milling Process

PDF

Topics: Drilling , Milling , Modeling , Thread , Cutting , Calibration , Errors , Geometry , Simulation results , Torque

Characteristics of Residual Stress Profiles in Hard Turned Versus Ground Surfaces With and Without a White Layer

A. W. Warren, Y. B. Guo

MSEC 2008; 387-396https://doi.org/10.1115/MSEC_ICMP2008-72230

Abstract

View Articletitled, Characteristics of Residual Stress Profiles in Hard Turned Versus Ground Surfaces With and Without a White Layer

PDF

Topics: Grinding , Stress , Turning

Implementation of Multirate Estimation for the Cylindrical Grinding Process

Cheol W. Lee

MSEC 2008; 397-405https://doi.org/10.1115/MSEC_ICMP2008-72307

Abstract

View Articletitled, Implementation of Multirate Estimation for the Cylindrical Grinding Process

PDF

Topics: Grinding , Machining , Inspection , Manufacturing industry , Noise (Sound) , Production control , Sensors , Signals , Surface roughness , Wear

Microstructure and Material Analysis of Worn WC-Co Ball-End Mills

Hsin-Yu Kuo, Kevin Meyer, Roger Lindle, Howard Weaver, Jun Ni

MSEC 2008; 407-415https://doi.org/10.1115/MSEC_ICMP2008-72366

Abstract

View Articletitled, Microstructure and Material Analysis of Worn WC-Co Ball-End Mills

PDF

Topics: Chemistry , Cobalt , Cutting , Machining , Manufacturing , Scanning electron microscopy , Spectroscopy , Waves

Alternative Binder Carbide Tools for Machining Superalloys

Daniel Waldorf, Scott Liu, Michael Stender, Daniel Norgan

MSEC 2008; 417-425https://doi.org/10.1115/MSEC_ICMP2008-72369

Abstract

View Articletitled, Alternative Binder Carbide Tools for Machining Superalloys

PDF

Topics: Binders (Materials) , Carbide cutting tools , Machining , Superalloys , Composite materials , Cobalt , Cutting , Cutting tools , Heat , Nickel

Methods for Improving Chucking Accuracy

Jeongmin Byun, C. R. Liu

MSEC 2008; 427-436https://doi.org/10.1115/MSEC_ICMP2008-72388

Abstract

View Articletitled, Methods for Improving Chucking Accuracy

PDF

Topics: Abrasive machining , Errors , Finishes , Finishing , Grinding , Machining , Patents , Turning

Crater Wear Patterns and Evolution on Multi-Layer Coated Carbides Using the Wavelet Transform

Jorge A. Olortegui-Yume, Moon-Chul Yoon, Patrick Y. Kwon

MSEC 2008; 437-445https://doi.org/10.1115/MSEC_ICMP2008-72402

Abstract

View Articletitled, Crater Wear Patterns and Evolution on Multi-Layer Coated Carbides Using the Wavelet Transform

PDF

Topics: Wavelet transforms , Wear , Machining , Noise (Sound) , Wavelets , Laser scanning microscopy , Microscale devices , Resolution (Optics)

Dry Machining Using Vortex-Tube Generated Cold Air as Coolant: A Literature Review

Weilong Cong, Z. J. Pei

MSEC 2008; 447-455https://doi.org/10.1115/MSEC_ICMP2008-72469

Abstract

View Articletitled, Dry Machining Using Vortex-Tube Generated Cold Air as Coolant: A Literature Review

PDF

Topics: Coolants , Cutting , Machining , Temperature , Vortices , Wear

Experimental Investigation on Diamond Drilling of Potassium Di-Hydrogen Phosphate (KDP) Crystal

Qiangguo Wang, Z. J. Pei, Hang Gao, N. J. Churi, Renke Kang

MSEC 2008; 457-464https://doi.org/10.1115/MSEC_ICMP2008-72489

Abstract

View Articletitled, Experimental Investigation on Diamond Drilling of Potassium Di-Hydrogen Phosphate (KDP) Crystal

PDF

Topics: Crystals , Diamonds , Drilling , Grinding , Hydrogen , Machining , Potassium , Surface roughness , Vibration

A Low Cost Wireless Tool Tip Vibration Sensor for Milling

Christopher A. Suprock, Barry K. Fussell, Raed Z. Hassan, Robert B. Jerard

MSEC 2008; 465-474https://doi.org/10.1115/MSEC_ICMP2008-72492

Abstract

View Articletitled, A Low Cost Wireless Tool Tip Vibration Sensor for Milling

PDF

Topics: Milling , Sensors , Vibration , Accelerometers , Chatter , Damage , Electronic components , Engineering prototypes , Hardware , Metal cutting

A Comparability Study of a Wireless Electret Accelerometer to a Traditional Piezoelectric Accelerometer

Joshua J. Jones, Timothy A. McNeal, Wesley A. Salandro, John T. Roth, Christopher A. Suprock, Barry K. Fussell

MSEC 2008; 475-484https://doi.org/10.1115/MSEC_ICMP2008-72513

Abstract

View Articletitled, A Comparability Study of a Wireless Electret Accelerometer to a Traditional Piezoelectric Accelerometer

PDF

Topics: Accelerometers

Model-Based Manufacturing Control

Dynamic Optimization of the Grinding Process in Batch Production

Cheol W. Lee

MSEC 2008; 485-494https://doi.org/10.1115/MSEC_ICMP2008-72212

Abstract

View Articletitled, Dynamic Optimization of the Grinding Process in Batch Production

PDF

Topics: Dynamic programming , Grinding , Optimization

Quality Monitoring and Fault Detection on Stamped Parts Using DCA and LDA Image Recognition Techniques

Qiangsheng Zhao, Jaime A. Camelio

MSEC 2008; 495-502https://doi.org/10.1115/MSEC_ICMP2008-72218

Abstract

View Articletitled, Quality Monitoring and Fault Detection on Stamped Parts Using DCA and LDA Image Recognition Techniques

PDF

Topics: Algorithms , Dimensional metrology , Facial recognition , Flaw detection , Fracture (Materials) , Image processing , Manufacturing , Principal component analysis , Sheet metal

Dimensional Error Compensation in Compliant Assembly Processes Using Virtual Assembly Training

Kang Xie, Jaime A. Camelio, L. Eduardo Izquierdo

MSEC 2008; 503-512https://doi.org/10.1115/MSEC_ICMP2008-72219

Abstract

View Articletitled, Dimensional Error Compensation in Compliant Assembly Processes Using Virtual Assembly Training

PDF

Topics: Error compensation , Manufacturing , Virtual assembly , Feedforward control , Fittings , Optimal control , Sheet metal , Algorithms , Design , Errors

A New Position Feedback Method for Manufacturing Equipment

Chan Wong, Carlos Montes, Laine Mears, John Ziegert

MSEC 2008; 513-521https://doi.org/10.1115/MSEC_ICMP2008-72222

Abstract

View Articletitled, A New Position Feedback Method for Manufacturing Equipment

PDF

Topics: Feedback , Production equipment

Graphical MPC for Fast Dynamic Systems

Ricardo Dunia, Javier Gutierrez

MSEC 2008; 523-532https://doi.org/10.1115/MSEC_ICMP2008-72310

Abstract

View Articletitled, Graphical MPC for Fast Dynamic Systems

PDF

Topics: Dynamic systems , Control equipment , Computer programming , Dynamics (Mechanics) , Computer software , Design , Engineers , Maintenance , Modeling , Optimization

Assessment of the Process Parameters and Their Effect on the Chip Length When Using CNC Toolpaths to Provide Chip Breaking in Turning Operations

Bethany A. Woody, K. Scott Smith, David J. Adams, William E. Barkman

MSEC 2008; 533-540https://doi.org/10.1115/MSEC_ICMP2008-72468

Abstract

View Articletitled, Assessment of the Process Parameters and Their Effect on the Chip Length When Using CNC Toolpaths to Provide Chip Breaking in Turning Operations

PDF

Topics: Computer numerical control machine tools , Turning , Cutting , Geometry , Machining , Oscillations

ERP Systems Supporting Lean Manufacturing: A Literature Review

Pritish Halgeri, Z. J. Pei, Karthik S. Iyer, Kendal Bishop, Ahmad Shehadeh

MSEC 2008; 541-549https://doi.org/10.1115/MSEC_ICMP2008-72542

Abstract

View Articletitled, ERP Systems Supporting Lean Manufacturing: A Literature Review

PDF

Topics: Manufacturing

Analytical Modeling of Metal Transfer for GMAW in the Globular Mode

U. Ersoy, S. J. Hu, E. Kannatey-Asibu

MSEC 2008; 551-560https://doi.org/10.1115/MSEC_ICMP2008-72548

Abstract

View Articletitled, Analytical Modeling of Metal Transfer for GMAW in the Globular Mode

PDF

Topics: Cycles , Gas metal arc welding , Metals , Modeling , Oscillations

Plastic Forming of Metals (A4 and MED14)

Hot Draw Mechanical Preforming of an Automotive Door Inner Panel

S. George Luckey, Jr., Peter A. Friedman

MSEC 2008; 561-570https://doi.org/10.1115/MSEC_ICMP2008-72133

Abstract

View Articletitled, Hot Draw Mechanical Preforming of an Automotive Door Inner Panel

PDF

Topics: Aluminum , Doors , Superplastic forming

The Effect of Model Parameters on Predicted Stress Based Failure Criterion for Sheet Metal

Matthew J. Derov, Brad L. Kinsey, Igor Tsukrov

MSEC 2008; 571-576https://doi.org/10.1115/MSEC_ICMP2008-72136

Abstract

View Articletitled, The Effect of Model Parameters on Predicted Stress Based Failure Criterion for Sheet Metal

PDF

Topics: Failure , Sheet metal , Stress

A Smart Actuator Design for Multiple Bio-Reagent Mixing in a High Pressure Optical Cell for Bio-Physical Research Applications

Oliver Xie, Parkson Lee-Gau Chong, Jack Zhou

MSEC 2008; 577-581https://doi.org/10.1115/MSEC_ICMP2008-72137

Abstract

View Articletitled, A Smart Actuator Design for Multiple Bio-Reagent Mixing in a High Pressure Optical Cell for Bio-Physical Research Applications

PDF

Topics: Actuators , Design , High pressure (Physics) , Pressure , Springs , Biophysicists , Testing , Biomaterials , Manufacturing , Micromotors

Investigation of Fatigue Properties for Welded Aluminum Forging Preforms

W. P. Harris, J. P. Domblesky

MSEC 2008; 583-590https://doi.org/10.1115/MSEC_ICMP2008-72139

Abstract

View Articletitled, Investigation of Fatigue Properties for Welded Aluminum Forging Preforms

PDF

Topics: Aluminum forgings , Fatigue properties , Preforms , Fatigue , Forging , Friction , Fatigue life , Friction welding , High cycle fatigue , Machinery

Analytical Model for the Characterization of the Guiding Zone Tribotest for Tube Hydroforming

Gracious Ngaile, Chen Yang

MSEC 2008; 591-600https://doi.org/10.1115/MSEC_ICMP2008-72250

Abstract

View Articletitled, Analytical Model for the Characterization of the Guiding Zone Tribotest for Tube Hydroforming

PDF

Topics: Design , Failure , Finite element methods , Fracture (Materials) , Fracture (Process) , Friction , Hoop stress , Lubricants , Lubrication , Pressure

Experimental Study on a New Method of Double Side Incremental Forming

Yongjun Wang, Ying Huang, Jian Cao, N. Venkata Reddy

MSEC 2008; 601-607https://doi.org/10.1115/MSEC_ICMP2008-72279

Abstract

View Articletitled, Experimental Study on a New Method of Double Side Incremental Forming

PDF

Topics: Elongation , Geometry , Machining , Machining centers , Shapes , Sheet metal

Finite Element Analysis of Deformed Geometry in Three-Roller Plate Bending Process

V. K. Tailor, A. H. Gandhi, R. D. Moliya, H. K. Raval

MSEC 2008; 609-616https://doi.org/10.1115/MSEC_ICMP2008-72439

Abstract

View Articletitled, Finite Element Analysis of Deformed Geometry in Three-Roller Plate Bending Process

PDF

Topics: Finite element analysis , Geometry , Rollers , Engineering simulation , Shapes , Simulation , Engineers , Errors , Finite element methods , Friction

Mathematical Modelling and Finite Element Simulation of Pre-Bending Stage of Three-Roller Plate Bending Process

A. H. Gandhi, H. V. Gajjar, H. K. Raval

MSEC 2008; 617-625https://doi.org/10.1115/MSEC_ICMP2008-72454

Abstract

View Articletitled, Mathematical Modelling and Finite Element Simulation of Pre-Bending Stage of Three-Roller Plate Bending Process

PDF

Topics: Finite element analysis , Modeling , Rollers , Simulation , Stress , Shells , Steel , Plates (structures) , Cylinders , Design

Single- and Multi-Stand Chatter Models in Tandem Rolling Mills

Huyue Zhao, F. Ehmann Kornel

MSEC 2008; 627-637https://doi.org/10.1115/MSEC_ICMP2008-72530

Abstract

View Articletitled, Single- and Multi-Stand Chatter Models in Tandem Rolling Mills

PDF

Topics: Chatter , Rolling mills , Stability

Potential Theory Based Blank Design for Deep Drawing Irregular Shaped Components

Wu Jianjun

MSEC 2008; 639-643https://doi.org/10.1115/MSEC_ICMP2008-72544

Abstract

View Articletitled, Potential Theory Based Blank Design for Deep Drawing Irregular Shaped Components

PDF

Topics: Blanks , Design , Potential theory (Physics) , Boundary element methods , Computer-aided design , Flow (Dynamics) , Computer-aided engineering , Cross section (Physics) , Design methodology , Shapes

Studies of Size Effect on the Formability of a Domed Part in Incremental Forming

Y. Huang, J. Cao, S. Smith, B. Woody, J. Ziegert, M. Li

MSEC 2008; 645-654https://doi.org/10.1115/MSEC_ICMP2008-72545

Abstract

View Articletitled, Studies of Size Effect on the Formability of a Domed Part in Incremental Forming

PDF

Topics: Size effect , Fracture (Materials) , Fracture (Process) , Failure , Forming limit diagrams , Design , Ductile fracture , Engineering simulation , Finite element analysis , Metal stamping

A Generic Tool Path Generation Methodology for Incremental Forming

Rajiv Malhotra, N. Venkata Reddy, Jian Cao

MSEC 2008; 655-660https://doi.org/10.1115/MSEC_ICMP2008-72547

Abstract

View Articletitled, A Generic Tool Path Generation Methodology for Incremental Forming

PDF

Topics: Finishes , Finite element analysis , Manufacturing

Sheet Metal Forming Limit Under Stretch-Bending

Z. Cedric Xia, Danielle Zeng

MSEC 2008; 661-667https://doi.org/10.1115/MSEC_ICMP2008-72555

Abstract

View Articletitled, Sheet Metal Forming Limit Under Stretch-Bending

PDF

Topics: Deformation , Failure , Forming limit diagrams , Necking , Plasticity , Sheet metal , Sheet metal work

Semiconductor Materials Manufacturing Processes

Ultra-Precision Machining Technology of the Soft and Brittle Functional Crystal

C. P. Lu, H. Gao, R. K. Kang, X. J. Teng, Q. G. Wang

MSEC 2008; 669-676https://doi.org/10.1115/MSEC_ICMP2008-72059

Abstract

View Articletitled, Ultra-Precision Machining Technology of the Soft and Brittle Functional Crystal

PDF

Topics: Brittleness , Crystals , Machining , Anisotropy , Deliquescence , Diamond turning , Finishing , Grinding , Surface quality

Dry Polishing of Non-Cubic Crystal Wafers

Scott Sullivan

MSEC 2008; 677-680https://doi.org/10.1115/MSEC_ICMP2008-72171

Abstract

View Articletitled, Dry Polishing of Non-Cubic Crystal Wafers

PDF

Topics: Crystals , Polishing , Semiconductor wafers , Gallium nitride , Damage , Finishes , Nitrogen , Slurries

Comparison of Free Abrasive Machining Processes in Wafer Manufacturing

Chunhui Chung, Imin Kao

MSEC 2008; 681-688https://doi.org/10.1115/MSEC_ICMP2008-72253

Abstract

View Articletitled, Comparison of Free Abrasive Machining Processes in Wafer Manufacturing

PDF

Topics: Abrasive machining , Manufacturing , Semiconductor wafers , Brittleness , Grinding , Machining , Slurries , Cracking (Materials) , Fracture (Process) , Gallium arsenide

All Years

Proceedings Papers

Materials

Adhesion and Interfaces

Material Selection, Processing, Reuse and Recycle for Sustainable Manufacturing

Metal and Metal Matrix Composites

Polymer and Polymer Matrix Composites

Processing

Advanced Powder Processing Technique

Advanced Welding and Bonding Technology

Coating and Thermal Spraying

Emerging and Non-Traditional Manufacturing Technologies

Energy Field Manufacturing

Environmentally Sustainable Manufacturing Systems

Innovative Cutting Tool Technologies for Modern Machining Challenges

Model-Based Manufacturing Control

Plastic Forming of Metals (A4 and MED14)

Semiconductor Materials Manufacturing Processes

Email alerts

Most Read Proceedings Papers in MSEC

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only