Volumes | International Manufacturing Science and Engineering Conference | American Society of Mechanical Engineers Digital Collection

Topics: Carbon , Composite materials , Fibers , Additive manufacturing , ASTM International , Carbon fibers , Compression , Density , Manufacturing , Melting

Effects of Printing Parameters on Geometrical and Mechanical Properties of 3D-Printed High-Performance Thermoplastics, Toward the Digitalization of Power Transformers

Thiago Assis Dutra, Catarina Costa, João R. Matos, Bruna F. Oliveira, Luís Miguel Oliveira, Cristiano Pereira Coutinho

MSEC 2022; V001T01A002https://doi.org/10.1115/IAM2022-91989

Abstract

View Articletitled, Effects of Printing Parameters on Geometrical and Mechanical Properties of 3D-Printed High-Performance Thermoplastics, Toward the Digitalization of Power Transformers

PDF

Topics: Additive manufacturing , Mechanical properties , Power transformers , Printing

Fused Granulated Fabrication (FGF) Processing Study for Novel sCF/LMPAEK Recycled Material to Manufacture Aeronautic Structural Parts

Celia Martín-Pérez, Daniel Rodriguez-Del Rosario, Elena Rodríguez-Senín, Noelia González-Castro

MSEC 2022; V001T01A003https://doi.org/10.1115/IAM2022-93890

Abstract

View Articletitled, Fused Granulated Fabrication (FGF) Processing Study for Novel sCF/LMPAEK Recycled Material to Manufacture Aeronautic Structural Parts

PDF

Topics: Aeronautics , Carbon fibers , Injection molding , Manufacturing , Recycled materials , Additive manufacturing , Aircraft , Compression , Fibers , Flexural behavior

Impact of Build Direction, Infill Pattern and Raster Angle on Mechanical Properties and Damage Tolerance of 3D Printed PLA

Deepesh Yadav, Prerna Gupta, Balila Nagamani Jaya

MSEC 2022; V001T01A004https://doi.org/10.1115/IAM2022-93940

Abstract

View Articletitled, Impact of Build Direction, Infill Pattern and Raster Angle on Mechanical Properties and Damage Tolerance of 3D Printed PLA

PDF

Topics: Additive manufacturing , Damage , Fracture (Materials) , Mechanical properties

Food Contact Materials: An Analysis of Water Absorption in Nylon 12 3D Printed Parts Using SLS After VaporFuse Surface Treatment

Elizabeth Cristine Adam Trindade, Camille Ruest, Jean-Sébastien Deschênes, Jean Brousseau

MSEC 2022; V001T01A005https://doi.org/10.1115/IAM2022-93944

Abstract

View Articletitled, Food Contact Materials: An Analysis of Water Absorption in Nylon 12 3D Printed Parts Using SLS After VaporFuse Surface Treatment

PDF

Topics: Additive manufacturing , Food products , Nylon fabrics , Surface finishing , Water absorption , Wetting

Additive Manufacturing of Star Structured Auxetic Lattices With Overhanging Links

Benedict A. Rogers, Max D. A. Valentine, Elise C. Pegg, Alexander J. G. Lunt, Vimal Dhokia

MSEC 2022; V001T01A006https://doi.org/10.1115/IAM2022-93965

Abstract

View Articletitled, Additive Manufacturing of Star Structured Auxetic Lattices With Overhanging Links

PDF

Topics: Additive manufacturing , Metamaterials , Manufacturing , Printing , Resolution (Optics) , Testing , Adhesives , Bridges (Structures) , Computational methods , Design

Comparison of Technical and Economic Properties of Additively Manufactured Components Using Masked Stereolithography and Fused Layer Modeling

Stefan Junk, Felix Bär

MSEC 2022; V001T01A007https://doi.org/10.1115/IAM2022-94087

Abstract

View Articletitled, Comparison of Technical and Economic Properties of Additively Manufactured Components Using Masked Stereolithography and Fused Layer Modeling

PDF

Topics: Additive manufacturing , Economics , Materials properties , Modeling , Printing , Stereolithography

Metals

Thermal Stability of Additively Manufactured Mar M 509

Shreehard Sahu, Bikash Kumar, Siba Sundar Sahoo, Balila Nagamani Jaya, Dheepa Srinivasan

MSEC 2022; V001T02A001https://doi.org/10.1115/IAM2022-91410

Abstract

View Articletitled, Thermal Stability of Additively Manufactured Mar M 509

PDF

Topics: Additive manufacturing , Alloys , Corrosion resistance , Cycles , Dislocation density , Ductility , Elongation , Grain size , Heat , Heat treating (Metalworking)

Development of a New Manufacturing Route by Direct Laser Metal Deposition With NiCrSiFeB Alloys to Replace Cobalt in Aeronautical Components

Juan Carlos Pereira, Fidel Zubiri, David Aguilar, Maria Del Carmen Taboada, Gaylord Guillonneau, Jerome Rocchi

MSEC 2022; V001T02A002https://doi.org/10.1115/IAM2022-91705

Abstract

View Articletitled, Development of a New Manufacturing Route by Direct Laser Metal Deposition With NiCrSiFeB Alloys to Replace Cobalt in Aeronautical Components

PDF

Topics: Additive manufacturing , Alloys , Cobalt , Lasers , Manufacturing , Metals , Sealing (Process)

Effect of Heat Treatment on Structure and Properties of Laser Powder Bed Fusion Inconel 939

E. Nandha Kumar, K. S. Athira, Subhradeep Chatterjee, Dheepa Srinivasan

MSEC 2022; V001T02A003https://doi.org/10.1115/IAM2022-93945

Abstract

View Articletitled, Effect of Heat Treatment on Structure and Properties of Laser Powder Bed Fusion Inconel 939

PDF

Topics: Additive manufacturing , Heat treating (Metalworking) , Lasers , Mechanical properties , Superalloys

A Feasibility Study of Additively Manufactured Composite Tooling

Max Valentine, Arjun Radhakrishnan, Vincent Maes, Elise Pegg, Maria Valero, James Kratz, Vimal Dhokia

MSEC 2022; V001T02A004https://doi.org/10.1115/IAM2022-93952

Abstract

View Articletitled, A Feasibility Study of Additively Manufactured Composite Tooling

PDF

Topics: Additive manufacturing , Composite materials , Design , Hardening (Curing) , Tooling

Dimensional Deviation Prediction Model Based on Scale and Material Concentration Effects for LPBF Process

Sabrine Ben Amor, Floriane Zongo, Borhen Louhichi, Antoine Tahan, Vladimir Brailovski

MSEC 2022; V001T02A005https://doi.org/10.1115/IAM2022-93969

Abstract

View Articletitled, Dimensional Deviation Prediction Model Based on Scale and Material Concentration Effects for LPBF Process

PDF

Topics: Additive manufacturing , Finite element analysis , Lasers , Machinery , Manufacturing , Numerical analysis , Product development , Stairs , Surface roughness

From Photopolymerization of Metal Suspension to Practical and Economical Additive Manufacturing of Haynes 214 Alloy for High Temperature Application

Hoa Xuan Nguyen, Hawke Suen, Bibek Poudel, Zhiyuan Qu, Mohsan Uddin Ahmad, Patrick Kwon, Andre Benard, Haseung Chung

MSEC 2022; V001T02A006https://doi.org/10.1115/IAM2022-93984

Abstract

View Articletitled, From Photopolymerization of Metal Suspension to Practical and Economical Additive Manufacturing of Haynes 214 Alloy for High Temperature Application

PDF

Topics: Additive manufacturing , Alloys , Binders (Materials) , High temperature , Metals

Effect of Build Geometry and Porosity in Additively Manufactured CuCrZr

Anup Kulkarni, Vivek C. Peddiraju, Subhradeep Chatterjee, Dheepa Srinivasan

MSEC 2022; V001T02A007https://doi.org/10.1115/IAM2022-93986

Abstract

View Articletitled, Effect of Build Geometry and Porosity in Additively Manufactured CuCrZr

PDF

Topics: Additive manufacturing , Geometry , Porosity

In-Process Mechanical Working of Additive Manufactured Rene 41

William Sean James, Supriyo Ganguly, Goncalo Pardal

MSEC 2022; V001T02A008https://doi.org/10.1115/IAM2022-94060

Abstract

View Articletitled, In-Process Mechanical Working of Additive Manufactured Rene 41

PDF

Topics: Additive manufacturing , Shot peening , Alloys , Flight , Heat , Temperature , Creep , Defense industry , Elastic moduli , Hammers

The Role of an Individual Lack-of-Fusion Defect in the Fatigue Performance of Additive Manufactured Ti-6Al-4V Part

Zongchen Li, Andre Gut, Iurii Burda, Silvain Michel, Dejan Romancuk, Christian Affolter

MSEC 2022; V001T02A009https://doi.org/10.1115/IAM2022-94120

Abstract

View Articletitled, The Role of an Individual Lack-of-Fusion Defect in the Fatigue Performance of Additive Manufactured Ti-6Al-4V Part

PDF

Topics: Additive manufacturing , Fatigue , Finite element analysis , Stress concentration

Polarized Illumination for Optical Monitoring System in Laser Powder Bed Fusion

Song Zhang, Sebastian Enk, Moritz Kolter, Johannes Henrich Schleifenbaum

MSEC 2022; V001T02A010https://doi.org/10.1115/IAM2022-94437

Abstract

View Articletitled, Polarized Illumination for Optical Monitoring System in Laser Powder Bed Fusion

PDF

Topics: Lasers , Monitoring systems

Development of Adaptive Toolpaths for Repair and Cladding of Complex 3D Components by Laser Metal Deposition

Igor Ortiz, Piera Álvarez, Maria Angeles Montealegre, Francisco Cordovilla, José Luis Ocaña

MSEC 2022; V001T02A011https://doi.org/10.1115/IAM2022-94946

Abstract

View Articletitled, Development of Adaptive Toolpaths for Repair and Cladding of Complex 3D Components by Laser Metal Deposition

PDF

Topics: Additive manufacturing , Cladding systems (Building) , Coatings , Computer software , Computer-aided design , Lasers , Maintenance , Metals , Toolpaths

A Multi-Modal Data-Driven Decision Fusion Method for Process Monitoring in Metal Powder Bed Fusion Additive Manufacturing

Zhuo Yang, Jaehyuk Kim, Yan Lu, Ho Yeung, Brandon Lane, Albert Jones, Yande Ndiaye

MSEC 2022; V001T02A012https://doi.org/10.1115/IAM2022-96740

Abstract

View Articletitled, A Multi-Modal Data-Driven Decision Fusion Method for Process Monitoring in Metal Powder Bed Fusion Additive Manufacturing

PDF

Topics: Additive manufacturing , Data fusion , Metal powders , Process monitoring

Emerging Technologies

Encapsulating and Inkjet-Printing Electronics on Flexible Substrates for Harsh Environment

Sahil Wankhede, Xian Du, Ali Alshehri, Keith Brashler, Doru Turcan

MSEC 2022; V001T03A001https://doi.org/10.1115/IAM2022-92250

Abstract

View Articletitled, Encapsulating and Inkjet-Printing Electronics on Flexible Substrates for Harsh Environment

PDF

Topics: Electronics , Printing

System Architecture and Design Parameters for Extrusion-Based Autonomous Construction Systems

Albert E. Patterson, Bhaskar Vajipeyajula, William R. Norris

MSEC 2022; V001T03A002https://doi.org/10.1115/IAM2022-93884

Abstract

View Articletitled, System Architecture and Design Parameters for Extrusion-Based Autonomous Construction Systems

PDF

Topics: Construction , Design , Extruding , System architecture , Additive manufacturing , Military systems , Aerospace systems , Bridges (Structures) , Concretes , Materials science

Temperature Field Monitoring in Fused Filament Fabrication Process Based on Physics-Constrained Dictionary Learning

Yanglong Lu, Yan Wang

MSEC 2022; V001T03A003https://doi.org/10.1115/IAM2022-93987

Abstract

View Articletitled, Temperature Field Monitoring in Fused Filament Fabrication Process Based on Physics-Constrained Dictionary Learning

PDF

Topics: Manufacturing , Physics , Temperature , Sensors , Additive manufacturing , Compression , Imaging , Process monitoring , Resolution (Optics) , Sensor placement

Exploring Augmented Reality for Teaching Design for Additive Manufacturing

Gustavo Melo, Rohit Ravi, Lucas Jauer, Johannes Henrich Schleifenbaum

MSEC 2022; V001T03A004https://doi.org/10.1115/IAM2022-94406

Abstract

View Articletitled, Exploring Augmented Reality for Teaching Design for Additive Manufacturing

PDF

Topics: Additive manufacturing , Augmented reality , Design , Teaching

Advantages of Additive Manufacturing Technology in Damping Improvement of Turbine Blading

Grzegorz Moneta, Michal Fedasz, Michal Szmidt, Slawomir Cieslak, Wieslaw Krzymien

MSEC 2022; V001T03A005https://doi.org/10.1115/IAM2022-96752

Abstract

View Articletitled, Advantages of Additive Manufacturing Technology in Damping Improvement of Turbine Blading

PDF

Topics: Additive manufacturing , Blades , Damping , Design , Gas turbines , Lasers , Optimization , Turbines , Vibration

Data-Driven Model Predictive Control for Roll-to-Roll Process Register Error

Karan Shah, Anqi He, Zifeng Wang, Xian Du, Xiaoning Jin

MSEC 2022; V001T03A006https://doi.org/10.1115/IAM2022-96840

Abstract

View Articletitled, Data-Driven Model Predictive Control for Roll-to-Roll Process Register Error

PDF

Topics: Errors , Predictive control

All Years

Front Matter

IAM2022 Front Matter

Polymers

Influence of Matrix Material on Impact Properties of Chopped Carbon Fiber-Thermoplastic Composites Made Using FDM/FFF

Effects of Printing Parameters on Geometrical and Mechanical Properties of 3D-Printed High-Performance Thermoplastics, Toward the Digitalization of Power Transformers

Fused Granulated Fabrication (FGF) Processing Study for Novel sCF/LMPAEK Recycled Material to Manufacture Aeronautic Structural Parts

Impact of Build Direction, Infill Pattern and Raster Angle on Mechanical Properties and Damage Tolerance of 3D Printed PLA

Food Contact Materials: An Analysis of Water Absorption in Nylon 12 3D Printed Parts Using SLS After VaporFuse Surface Treatment

Additive Manufacturing of Star Structured Auxetic Lattices With Overhanging Links

Comparison of Technical and Economic Properties of Additively Manufactured Components Using Masked Stereolithography and Fused Layer Modeling

Metals

Thermal Stability of Additively Manufactured Mar M 509

Development of a New Manufacturing Route by Direct Laser Metal Deposition With NiCrSiFeB Alloys to Replace Cobalt in Aeronautical Components

Effect of Heat Treatment on Structure and Properties of Laser Powder Bed Fusion Inconel 939

A Feasibility Study of Additively Manufactured Composite Tooling

Dimensional Deviation Prediction Model Based on Scale and Material Concentration Effects for LPBF Process

From Photopolymerization of Metal Suspension to Practical and Economical Additive Manufacturing of Haynes 214 Alloy for High Temperature Application

Effect of Build Geometry and Porosity in Additively Manufactured CuCrZr

In-Process Mechanical Working of Additive Manufactured Rene 41

The Role of an Individual Lack-of-Fusion Defect in the Fatigue Performance of Additive Manufactured Ti-6Al-4V Part

Polarized Illumination for Optical Monitoring System in Laser Powder Bed Fusion

Development of Adaptive Toolpaths for Repair and Cladding of Complex 3D Components by Laser Metal Deposition

A Multi-Modal Data-Driven Decision Fusion Method for Process Monitoring in Metal Powder Bed Fusion Additive Manufacturing

Emerging Technologies

Encapsulating and Inkjet-Printing Electronics on Flexible Substrates for Harsh Environment

System Architecture and Design Parameters for Extrusion-Based Autonomous Construction Systems

Temperature Field Monitoring in Fused Filament Fabrication Process Based on Physics-Constrained Dictionary Learning

Exploring Augmented Reality for Teaching Design for Additive Manufacturing

Advantages of Additive Manufacturing Technology in Damping Improvement of Turbine Blading

Data-Driven Model Predictive Control for Roll-to-Roll Process Register Error

Email alerts

Most Read Proceedings Papers in MSEC

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Proceedings Papers

Front Matter

Polymers

Metals

Emerging Technologies

Email alerts

Most Read Proceedings Papers in MSEC

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only