... Abstract A finite element model for tissue heating by electromagnetic energy was used to predict temperatures over time intervals associated with clinical treatments. Thermal and electrical properties of tissue as well as perfusion are input as functions of temperature. The software...

... modeling software. The effect of interface temperature on frictional behavior was investigated during welding, where non-linear temperature dependent material properties were considered. The effects of rotational speed and friction pressure on the temperature field, flash morphology, interface temperature...

... their shear yield stress. However, the effect of temperature effects on GMRG has not been reported yet, which is a fundamental step for engineering applications. To investigate the effect of graphite additive proportion and temperature on graphite magnetorheological grease (GMRG), GMRGs with five different...

... Abstract Real-time monitoring of temperature and pressure, particularly in harsh environments such as extreme temperature and high electromagnetic radiation environments, has wide-ranging applications in the aerospace, civil infrastructure, and motor industries. Surface acoustic wave (SAW...

... specimens, smaller than the literature on warp in polyamide (PA) of up to 4. Warp in these SLA parts is likely small since there is no uneven heating between layers during the printing process. three-dimensional printing warp UV curing heat temperature Proceedings of the ASME 2022 International...

... coefficients and reference temperatures, following the import of solid surface boundary temperatures computed via the computational heat transfer (CHT) module, and the automated integration and boundary data exchange iterations between the two modules. CHT module computes solid surface temperature of all heat...

... to the effects of the cutting speed and feed rate, in order to establish the significance of the effect of the curvature compared to other factors that affect the drill machining process. The effects of these parameters on the power and temperature during the drilling process were also analyzed and compared...

...Proceedings of the ASME 2021 International Mechanical Engineering Congress and Exposition IMECE2021 November 1-5, 2021, Virtual, Online IMECE2021-73399 FULL SCALE 3D COMPUTATIONAL MODEL OF THE INDUSTRIAL -SCALE COAL FIRED BOILER PERFORMANCE FOR TEMPERATURE SENSOR INSTALLATION GUIDANCE Tanuj Gupta...

... Abstract The linear variable displacement transducer (LVDT) is a widely used displacement sensor in engineering. The ability to work in a high-temperature and radioactive environment is an advantage of LVDT’s application in nuclear engineering. This paper utilizes the FEM to explore the LVDT...

... reinforced composites UV moisture temperature deterioration fatigue damage multiphysics Proceedings of the ASME 2021 International Mechanical Engineering Congress and Exposition IMECE2021 November 1-5, 2021, Virtual, Online IMECE2021-70637 CHARACTERIZATION AND MODELING OF HOW ENVIRONMENTAL AGING...

.... The effect of various parameters such as air flow velocity, relative humidity, injector mass flow rate and injector position in the wind tower was studied. The variations in the temperature and relative humidity was observed in the greenhouse. The computational fluid dynamic analysis was carried out using...

... reinforced composites UV moisture temperature deterioration damage multiphysics multiscale modelling structural scale DEVELOPMENT OF A MODEL OF SYNERGISTIC EFFECTS BETWEEN DETERIORATION MECHANISMS AND DAMAGE IN WOVEN GLASS FIBER REINFORCED POLYMERIC COMPOSITE STRUCTURE Zhiye Li Stanford University...

.... thermo-acoustic traveling-wave design construction temperature generator electricity CONSTRUCTION AND PERFORMANCE ANALYSIS OF A TWO-STAGE TRAVELING-WAVE THERMO-ACOUSTIC GENERATOR HS Shamase1, LK Tartibu2 Department of Mechanical and Industrial Engineering Technology, University of Johannesburg...

... tool temperature of 55°C for MQL-GO (Graphene oxide) process. Monel K500 minimum quantity lubrication surface roughness temperature chip morphology EXPERIMENTAL INVESTIGATION ON TURNING OF MONEL K500 ALLOY USING NANO GRAPHENE CUTTING FLUID UNDER MINIMUM QUANTITY LUBRICATION Arul...

... increased the room temperature tensile strength at lower volume fractions of SiC, the degradation of aged strength was similar to that of the pure PLA. The PLA/SiC composites had no measurable strength after aging. The ABS specimens retained their strength and failure strain after aging. additive...

... 3 ) with change temperature and compared with one scenario of distilled water. The spontaneous imbibition test was performed in this study at room temperature to oven temperature (30C°, 40C°, 50C°, 60C°, 70C°). The results shown that the oil recovery increases with the increase of the concentration...

... Bone Sawing Temperature Necrosis Thermal necrosis of bone occurs at sustained temperatures above approximately 47°C. During joint replacement surgery, resection of bone by sawing can heat the bone above this necrotic threshold, thereby inducing cellular damage and negatively affecting...

... The real-time measurement of heat flux is an important challenge for several industrial applications including furnace control. For efficient operation of high-temperature process furnaces, accurate and stable temperature measurements are needed. Directional Flame Thermometers (DFTs) offer...

... the furnace has been investigated. Results revealed that both the gaps on the sidewall of the tunnel and the location of air distribution wall have impact on the temperature distribution of catalyst tubes. The performance of each configuration with different parameters is carried out to provide a great deal...

... the evaporation porous medium. The combustion characteristics of three blends (volume percentages of CME equal to 25%, 50% and 75%) were studied at four different initial equivalence ratios. The global pollutant emissions, axial temperature profiles and the radiative heat fraction of the flame downstream...