Skip Nav Destination
1-7 of 7
Keywords: residual stressesClose
Proc. ASME. IMECE2020, Volume 2B: Advanced Manufacturing, V02BT02A025, November 16–19, 2020
Paper No: IMECE2020-24105
... speed modes, and the laser power. The grain size and phase structure were influenced significantly by the laser power; increasing it had resulted in larger grains, and a coarser microstructure. The results also showed that the residual stresses of the optimized specimens were compressive. Keywords...
Proc. ASME. IMECE2019, Volume 12: Advanced Materials: Design, Processing, Characterization, and Applications, V012T10A022, November 11–14, 2019
Paper No: IMECE2019-11120
...EFFECT OF COATING PROCESS PARAMETERS ON THE DEVELOPMENT OF RESIDUAL STRESSES IN CERAMIC COATINGS Ali Gadelmoula, Khaled Al-Athel1 King Fahd University of Petroleum & Minerals Dhahran, Saudi Arabia ABSTRACT Ceramic coatings are widely used in many engineering applications, especially applications...
Proc. ASME. IMECE2019, Volume 1: Advances in Aerospace Technology, V001T03A012, November 11–14, 2019
Paper No: IMECE2019-10019
... accumulation and life assessment of aluminum alloy is a common process in the aeronautics industry, especially to extend the fatigue lifetime of their structures. This process aims at generating residual stresses and increases thereby the strength of hollow parts including aluminum alloy plate holes...
Proc. ASME. IMECE2013, Volume 2B: Advanced Manufacturing, V02BT02A010, November 15–21, 2013
Paper No: IMECE2013-62873
... NUMERICAL ANALYSIS OF RESIDUAL STRESSES IN V-BUTT WELDED JOINT OF TWO DISSIMILAR PIPES Gurinder Singh Brar Gurdeep Singh Department of Mechanical Engineering Department of Mechanical Engineering , Guru Nanak Dev Engineering College Sant Longowal Institute of Engg. and Tech., Gill Road, Ludhiana...
Proc. ASME. IMECE2012, Volume 3: Design, Materials and Manufacturing, Parts A, B, and C, 67-74, November 9–15, 2012
Paper No: IMECE2012-88476
... heat transfer, part residual stresses of alternate raster during the EBAM process subject to a moving heat source with a Gaussian volumetric distribution. The developed model was first examined against literature data. The coupled mechanical simulation is able to capture the evolution of the part...
Proc. ASME. IMECE2005, Applied Mechanics, 575-579, November 5–11, 2005
Paper No: IMECE2005-79729
... 25 01 2008 An investigation has been made into the effect of residual stresses on the vibration characteristics of a thin rectangular plate elastically restrained against rotation along all edges using an energy method. General frequency equations with and without the effect...
Proc. ASME. IMECE2006, Applied Mechanics, 615-617, November 5–10, 2006
Paper No: IMECE2006-13481
... 18 01 2008 In this paper an investigation has been made into the effect of residual stresses on the vibration characteristics of thin rectangular clamped plate. General frequency equations with and without the effect of residual stresses due to multi-lines of heating or welding along...