Skip Nav Destination
1-13 of 13
Proc. ASME. IMECE2020, Volume 2B: Advanced Manufacturing, V02BT02A032, November 16–19, 2020
Paper No: IMECE2020-23302
... Abstract Drilling is most commonly used secondary machining process for structural joining of Glass Fiber Reinforced Plastic (GFRP) composites. Performing drilling operations on GFRPs/Multi-Walled CarbonNanoTubes (MWCNTs) reinforced GFRPs is really a challenging task due to their non...
Proc. ASME. IMECE2020, Volume 2B: Advanced Manufacturing, V02BT02A031, November 16–19, 2020
Paper No: IMECE2020-23273
... Abstract Controlling drilling temperature and thrust forces play a significant role in reducing tool wear and improving machining efficiency. In this work, drilling experiments are set up to measure flank surface temperature via thermocouple sensor wires passed through the coolant holes of 10mm...
Proc. ASME. IMECE2020, Volume 12: Mechanics of Solids, Structures, and Fluids, V012T12A049, November 16–19, 2020
Paper No: IMECE2020-24047
... realtime predicting the remaining useful life of rotary shouldered threaded connections for prognostic health management of the drilling equipment. deep learning finite element analysis drilling rotary shouldered threaded connections fatigue A HYBRID SUPERVISED DEEP LEARNING AND NONLINEAR...
Proc. ASME. IMECE2013, Volume 2B: Advanced Manufacturing, V02BT02A044, November 15–21, 2013
Paper No: IMECE2013-64499
... 1 Copyright © 2013 by ASME Predictive modeling of surface microstructure of hardened steel subject to drilling Ninggang Shen, Hongtao Ding* and Wei Li Department of Mechanical & Industrial Engineering The University of Iowa Iowa City, IA 52242, USA KEYWORDS Microstructure, Drilling, Modeling...
Proc. ASME. IMECE2012, Volume 3: Design, Materials and Manufacturing, Parts A, B, and C, 1053-1059, November 9–15, 2012
Paper No: IMECE2012-86412
... Drilling aluminum alloys burr formation cutting parameters cutting fluid design of experiment The burr formation mechanisms strongly depend on the machining methods as well as cutting conditions. Cutting fluids play significant roles in machining, including reduction of friction and...
Proc. ASME. IMECE2012, Volume 4: Dynamics, Control and Uncertainty, Parts A and B, 1305-1313, November 9–15, 2012
Paper No: IMECE2012-87856
... bond graph model of a drillstring has been used for simulation that predicts axial vibration, torsional vibration, and coupling between axial and torsional vibration due to bit-rock interaction. Drilling vibration lumped-segment model stick-slip bit-bounce bit-rock interaction linear...
Proc. ASME. IMECE2010, Volume 3: Design and Manufacturing, Parts A and B, 1031-1035, November 12–18, 2010
Paper No: IMECE2010-40408
... developed using the Box and Behnken experimental design approach, and it was demonstrated that cemented carbide drills with proper cutting geometry and MQL settings can be used for deep hole drilling of aluminum. This work, focused on developing a production ready application, proved that MQL technology is...
Proc. ASME. IMECE2010, Volume 3: Design and Manufacturing, Parts A and B, 173-178, November 12–18, 2010
Paper No: IMECE2010-37804
... Composite materials Drilling Genetic algorithms Multi-objective optimization Material Removal Rate Delamination Composite materials provide distinctive advantages in manufacture of advanced products because of attractive features such as high strength and light weight, but on the...
Proc. ASME. IMECE2004, Manufacturing Engineering and Materials Handling Engineering, 955-963, November 13–19, 2004
Paper No: IMECE2004-59340
... Drilling chatter time domain simulation A mathematical model of the torsional-axial chatter vibrations in drilling is presented. The model considers the exact kinematics of both rigid body, and coupled torsional and axial vibrations of the drill. The drill is modeled as a pretwisted beam...
Proc. ASME. IMECE2005, Manufacturing Engineering and Materials Handling, Parts A and B, 59-67, November 5–11, 2005
Paper No: IMECE2005-82761
... thermosyphon drill to the performance of a solid drill and a heat pip Re tem dri po tem hig the wa dri IN the red sim per per Ex we am ins To Proceedings of IMECE2005 2005 ASME International Mechanical Engineering Congress and Exposition November 5-11, 2005, Orlando, Florida USA e drill under...
Proc. ASME. IMECE2005, Manufacturing Engineering and Materials Handling, Parts A and B, 885-892, November 5–11, 2005
Paper No: IMECE2005-80254
... machining of the titanium alloy have been investigated using different tool designs and machining conditions. The results are compared with those when machining the same material with diamond grinding. Cutting force drilling grinding rotary ultrasonic machining surface roughness titanium alloy...
Proc. ASME. IMECE2005, Manufacturing Engineering and Materials Handling, Parts A and B, 767-773, November 5–11, 2005
Paper No: IMECE2005-79646
... Wu S. M. , “ Monitoring-drilling wear states by a Fuzzy pattern recognition technique ,” Journal of Engineering for Industry , August 1998 , 110 , pp. 297 – 302 . Masory, “Monitoring machining processes using multisensor readings fused by artificial neural networks,” 7th International...
Proc. ASME. IMECE2006, Fluids Engineering, 955-970, November 5–10, 2006
Paper No: IMECE2006-16336
... fluids in coiled tubing. Application of the new drag reduction envelope is also discussed. coiled tubing drag reduction polymer fluid non-Newtonian stimulation drilling Berman N. S. , 1978 , “ Drag Reduction by Polymers ,” Annual Review of Fluid Mechanics , 10 , pp. 47 – 64...