... evolution of the solidification process in WAAM depends on the amount of heat input and the layering sequence. To examine the effect of layering sequences on the development of grain growth, microstructure, and mechanical properties, Inconel 825 alloy was deposited in various sequences for layering by WAAM...

... process, mechanical properties, dielectric strength 1. INTRODUCTION Nanocomposites have emerged as a promising area of research in the last few decades due to their ability to improve the properties of host materials, such as polymers, by adding nanomaterial fillers like nanoparticles, nanorods...

... loading to the interface, and its fatigue interfacial strength was evaluated. lithium-ion batteries mechanical properties FEM simulation LaSAT Proceedings of the ASME 2023 International Mechanical Engineering Congress and Exposition IMECE2023 October 29-November 2, 2023, New Orleans, Louisiana...

... the mechanical properties of its physical structures. Research has shown that the chaparral yucca has distinctive physical and structural characteristics that allow it to withstand external forces and environmental stresses. For example, the yucca’s leaves and stems are composed of fibrous tissue that provides...

... with defects in the composites. SEM images are evidence to attribute better mechanical behavior of bio-composites. nicker nut shell powder filler epoxy composites mechanical properties SEM analysis and polymer composites Proceedings of the ASME 2023 International Mechanical Engineering Congress...

..., Young’s modulus, and Poisson’s ratio measurements under dynamic force loading conditions result in the overall design of innovative polyaramid additives applied as non-metallic alternatives for the improvement of mechanical properties of high sulfate resistant Portland cement (HSR). In this study, strain...

... is very popular in additive manufacturing because of its unique properties, including high strength, high-temperature resistance, and excellent corrosion and oxidation resistance. This paper uses atomistic tensile test simulation to investigate the mechanical properties of additively manufactured Inconel...

.... PLA supercritical CO2 carbon footprint thermal conductivity mechanical properties acoustic properties Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition IMECE2022 October 30-November 3, 2022, Columbus, Ohio IMECE2022-95956 COMPOSTABLE, FULL BIOBASED FOAMS...

... been successfully used in such environments, however, they are limited in terms of their ability to offer multifunctional behavior i.e., thermal conductive behavior with mechanical properties. This gap offers the opportunity for their properties to be enhanced as an advanced multi-functional polymer...

... manufacturing segmentation print on fabric adhesion mechanical properties Proceedings of the ASME 2021 International Mechanical Engineering Congress and Exposition IMECE2021 November 1-5, 2021, Virtual, Online IMECE2021-69695 THERMOPLASTICS 3D PRINTING USING FUSED DEPOSITION MODELING ON FABRICS Maxwell...

... environments compared to metals. However, penetration of moisture in to the polymer matrix can adversely affect the mechanical properties of composite materials. In this study, the effect of exposure to plain water and simulated sea water (3.5% by weight NaCl salt) water on the mechanical properties of GFRP...

... for the manufacturers. This experimental work relies on the minimum requirements of various mechanical properties recommended by ASTM F3001-14 and ASTM F136-13 standards for determining the optimal process parameters for PCI manufacture. Ti6Al4V ELI (Titanium–6Aluminum–4Vanadium Extra-Low-Interstitial) alloy test...

... on the internal grain features and on the surface waviness. surface roughness is termed as one of the main problems on the produce parts using WAAM technology. This study discussed different ways by which the internal residual stresses can be reduced, and mechanical properties of fabricated parts can be improved...

.... The tests include (a) micro-tensile tests on free-standing gold thin films, rolled copper foils and elastomeric fibers, and (b) micro-indentation tests on aluminum samples. The machine yields consistent high quality data at a very high resolution. mechanical properties materials testing microtensile...

... variation of mechanical properties of the films. In addition, their mechanical properties such as Young’s modulus and hardness showed wide variation by about 3 times comparing with those of bulk gold. Similarly, the EM resistance of the electroplated gold bumps varied drastically depending on the ratio...

... Abstract Soft, ultra-stretchable thermoplastic elastomers have recently became available for use with desktop, fused deposition modeling printers. However, the effects of additive manufacturing process parameters on final mechanical properties are presently not well-known for this class...

... and mechanical properties were investigated. Key results showed that in the as-rolled state, the plates processed by asymmetrical rolling had smaller grain size and higher hardness value and ultimate tensile strength than symmetrical rolling. After annealing treatment, the hardness value of the both plates...

... Abstract Among the different commercially used Al alloys, the 7000 series offers some of the highest mechanical properties making them the material of choice for several critical engineering applications. These Al alloys often required to undergo a heat treatment process to enhance its...

... to promising composite materials. FITR spectroscopy analysis revealed a distinct interaction between the polymer chain and the band positions. The mechanical analysis was conducted based on the recycled materials application. The mechanical properties were observed during the tests and reflected...

... of the innovative composites. Phenolic Resin composite material carbon nanotubes mechanical properties thermal properties STRAIN SENSING OF GLASS FIBER REINFORCED COUPONS BY USING CARBON NANOTUBE DOPED RESIN Achilles Vairis Department of Mechanical Engineering Crete Institute of Technology, Heraklion...