Water flow rate sensors in residential homes have the capacity to revolutionize energy conservation by providing real time, user specific water usage data to the Internet of Things. Water heaters typically heat water to a constant set-temperature throughout the day. This constant heating contributes to about 18% of total home energy usage, making water heaters an especially effective target for potential energy savings. By harnessing the knowledge of hot water usage and flow rate, machine learning processes can determine an optimized water heating schedule for individual users. However, current methods to determine water flow rate involve either a complicated installation process or use of expensive equipment. The work in this paper proposes an economical, non-invasive package to both detect hot water usage and measure the flow rate, by utilizing three temperature sensors. Processing of the data quantitatively correlates temperature change of the incoming/outgoing water pipes to the water flow rate through the pipes. To accomplish this, the principle of energy conservation was applied using transient temperature measurements taken from the outer surface of both the cold inlet and hot outlet pipes. In the process of formulating energy conservation equations, there exist unknowns which will be determined by different self-testing algorithms. Developing transient and steady state equations for the inlet and outlet pipes allowed for calculations of the flow rate through a water heater to be performed. Specified conservation equations applied to both cold inlet and hot outlet pipes will enhance the accuracy and reliability of the proposed method. For verification, experimental setup was built to verify our model by comparing actual usage and flow rate measurements from a household water heater with the calculated usage and flow rate from the temperature change rate.
Skip Nav Destination
ASME 2017 International Mechanical Engineering Congress and Exposition
November 3–9, 2017
Tampa, Florida, USA
Conference Sponsors:
- ASME
ISBN:
978-0-7918-5841-7
PROCEEDINGS PAPER
Non-Invasive Water Flow Sensing for Smart Water Heater Controller
Joe Singer,
Joe Singer
Santa Clara University, Santa Clara, CA
Search for other works by this author on:
Scott Jansen,
Scott Jansen
Santa Clara University, Santa Clara, CA
Search for other works by this author on:
Chenli Wang,
Chenli Wang
Santa Clara University, Santa Clara, CA
Search for other works by this author on:
Hohyun Lee
Hohyun Lee
Santa Clara University, Santa Clara, CA
Search for other works by this author on:
Joe Singer
Santa Clara University, Santa Clara, CA
Scott Jansen
Santa Clara University, Santa Clara, CA
Chenli Wang
Santa Clara University, Santa Clara, CA
Hohyun Lee
Santa Clara University, Santa Clara, CA
Paper No:
IMECE2017-72021, V006T08A047; 7 pages
Published Online:
January 10, 2018
Citation
Singer, J, Jansen, S, Wang, C, & Lee, H. "Non-Invasive Water Flow Sensing for Smart Water Heater Controller." Proceedings of the ASME 2017 International Mechanical Engineering Congress and Exposition. Volume 6: Energy. Tampa, Florida, USA. November 3–9, 2017. V006T08A047. ASME. https://doi.org/10.1115/IMECE2017-72021
Download citation file:
28
Views
Related Proceedings Papers
Related Articles
Experimental Testing of a Thermoelectric-Based Hydronic Cooling and Heating Device With Transient Charging of Sensible Thermal Energy Storage Water Tank
J. Thermal Sci. Eng. Appl (December,2009)
Efficient Operation of Air-Side Economizer Using Extremum Seeking Control
J. Dyn. Sys., Meas., Control (May,2010)
A Gray-Box Based Virtual SCFM Meter in Rooftop Air-Conditioning Units
J. Thermal Sci. Eng. Appl (March,2011)
Related Chapters
ASME Section VI: Recommended Rules for the Care and Operation of Heating Boilers
Companion Guide to the ASME Boiler & Pressure Vessel Codes, Volume 1 Sixth Edition
Dynamic Cool Roofing Systems
Advanced Energy Efficient Building Envelope Systems
Threshold Functions
Closed-Cycle Gas Turbines: Operating Experience and Future Potential